Well here's the continuation of Barren, but now with ZV6.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Proudly Presents...
BarRin
What is has:
This Rom will install the modem, kernel, and the Rom
Rooted
busybox
zipaligned
V2 - init.d support through the kernel
Install
In TWRP, select Advanced, Wipe, then /system, /cache, /dalvic, and /data. DO NOT select internal or ext SD!
Flash Rom
Update profile/prl
Go to "Settings, More, Mobile network, and select anything but "Global
Change logs :
Code:
[B]V3.0.1[/B]
Just an update that is mostly Themed. Flash V3, then this. This works without xposed. So it MAY work with any ZV6 Rom.
Themed Messaging. No more Gawd Awful Yellow!!! Blends with stock theme now.
Themed Navbar - To get the Navbar to work with apps, Select "White Gradation" in Settings>Display>Home Touch Buttons>Color.
New bootani. - Courtesy of @HPTesla
Added oversharpening script from Skin1980 to the kernel. - so, new Stock kernel.
[B]V3[/B]
Updated SuperSU so we shouldn't have to update binaries - installs a whole different way
Stock ZV6 kernel with init.d and kexec support - MultiRom compatible
Native host files - you don't need an ad blocker app anymore
executable zipalign binaries - it'll run in terminal
Updater-script will delete a lot of junk files now
Qslide fix for WIFI calling - no longer stuck at the 4th slot
build.prop changes - removed some, fix a couple
init.d scripts - removed a couple that weren't doing anything
Most of everything since V2
This took a lot of work so there's probably other small things I forgot
V 2.3.1_beta
This can be used on any stock ROM and any ZV6 version.
1.Using the APN from Vanir as it's the most thorough one out. It SEEMS to give better reception for phone, data, and the handshake between LTE/eHRPD/3G is better. THIS is why this is beta. [B]You must have your phone all setup before using this!!![/B] It will not work on a fresh install. Also, it doesn't allow APN changes other than Sprints. Hotspot MAY work but unknown.
2. Removed MLT, and LGLIA apk's. More LG tattletales.
3. Fixed a couple of my goofs in build.prop. Got rid of the hiccup as I call it.
4. Added LG KB Black Theme for those that use LG KB.
5. init.d script changes
V 2.3 Includes everything from V2, and
build.prop edits for battery, speed and reception
Added LG FM Radio to /data (uninstallable) - It requires the headphone but will play through the speakers when plugged in. Headphones seem to act as the antennae. Thanks to @anvicota for this
Updated Sprint VoiceMail
V2.2 -Includes 2.1 plus-
Hopefully fixed install of bootani for people coming from Stock or Flashtool
Modified platform.xml - SD card fix?
Modified mixer paths- less increase on BT only. - Hopefully fixes distortion some were having
Install of Rin Kernel - installing a different way for the very few - again, hopefully
build.prop to reflect BarRin_2.2 in Software info
V2.1 - New Rin Kernel and BarRin bootani.
V2 - Like the original Barren. Nice and slim.
Removed most all, LG, Sprint apps
Added xposed and Tweakbox - removable
Some apps moved to /data
init.d scripts
Increased and FIXED Aux_out mixer path
Now installing with "Rin" kernel.
V1
Many apps removed but still giving the LG Stock experience. Still has Concierge, Smart Cards, Weather, OK Google on all screens, etc
A few build.prop mods - LG's mistake, All split window apps
Sd card fix
mixer_paths
Updated LG Keyboard, Quickmemo, Sprint voicemail - all can be uninstalled
Donators - ( Never asked for, but very much appreciated. Thank you )
Previous Barren
** @mjjcb
** @nkyer
BarRin
* @mjjcb
* @Kemocybr
Downloads:
______________________________
BarRin_D_V3.0.1 - Just an Update. Flash V3, then this. See Changelog.
BarRin_V3 - This is the full ROM. ZV6 Multirom Kernel, Modem included. Strongly suggest a CLEAN INSTALL! AND MAKE SURE YOU DISABLE ANY "SET ON BOOT'" OPTIONS YOU HAVE IN TRICKSTER/FAUX!!
- You can read this also if you'd like. Ramblings of this Stooge
BarRin_2.3.1_beta This is NOT a rollup of the previous. This is considered beta for now and can be used on ANY stock ROM. See change log above.
BarRin_2.3 - Must have at least V2 installed. Then flash this. It has everything up until now.
Barrin_2.2 - Another update. You must have V2 installed first, then flash this. If you installed 2.1, update to this as there were some changes we need.See change log - READ HERE for more info/fixes - Also, Software info is going to say "BarRin_D_2.2 regardless. Sorry bout that.
BarRin _2.1 - This is just an update. You must have BarRin V2 installed first. Then flash/update to this. This is just an update.
BarRin _D_V2
BarRin_O_V2
BarRin_D_V1
BarRin_O_V1
XDA:DevDB Information
BarRin, ROM for the Sprint LG G3
Contributors
engine95, HPTesla, seanskiT!, Tectas
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: Stock
Version Information
Status: Stable
Created 2014-11-23
Last Updated 2015-01-21
Added files and extras
BarRin V1 to BarRin V2 for Concierge/Weather
You'll need to flash either BarRin V1 Odexed or Deodexed first. Then flash this. This SHOULD work on both and update you to V2.
I'm not supporting this, so if you install it you're on your own. That's just because I'm not including it since V1.
BarRin_2.2_mixer_paths - Same as below, but with less BT increase. Some were getting distortion.
Fixed Aux-out mixer_paths
This will update ANY ZV6 mixer paths to increased volumes.
Stock_ZV6_mixer_paths
Stock ZV6 Kernels
Stock and Stock with init.d support.
1-21-15 -And now with MultiRom support
Flashable APN's
Flashable_Stock_Hosts
Issues/Fixes
SD cards
SD cards are becoming an issue for some reason. If you've followed ALL the instructions in the OP, and are still having issues, you may need to wipe your ext SD. And sometimes Internal as well.
Remove your ext SD and boot up.
If the problems are solved then you need to format your SD card in Windows or Linux as Fat32 no matter what size your card is. DO NOT USE TWRP to format Ext SD.
Root
If SuperSU has issues updating it's binaries, you may need to flash This when you flash the ROM.
Thanks Holmes. Downloading now.
One more...just in case
Thanks Team Stooge. Downloading now, will report back with any issues I come across.
After boot getting android process error. Cant get past selecting language selection
ssaggy said:
After boot getting android process error. Cant get past selecting language selection
Click to expand...
Click to collapse
Check your md5 and or re-download. I personally recommend downloading to pc then move to phone. I have flashed it about 4 times since last night and no issues like that. Be sure to wipe cache, dalvik, system and data.
Any major upgrade to Barren3 with Rin1.8?
gorillaz1 said:
Any major upgrade to Barren3 with Rin1.8?
Click to expand...
Click to collapse
Right now nothing major, just using ZV6 as a base. And right now only has stock kernel. New Rin is in the works.
Roger that. I'll be patient then. Keep up the great work!
Running great. Thanks guys.
Does this zip include the new radio?
Sent from my LG-ls990 using XDA Free mobile app
chrisctb said:
Does this zip include the new radio?
Sent from my LG-ls990 using XDA Free mobile app
Click to expand...
Click to collapse
It's in the OP. Yup
Just so you guys know, read this. http://forum.xda-developers.com/showthread.php?p=56991878
This won't effect this rom too much as @HPTesla had the kernel about ready for Primtime.
But it does/will effect the future of our beloved G3. When we finally get L, were screwed. Just thought I'd let you all know.
engine95 said:
It's in the OP. Yup
Click to expand...
Click to collapse
Apparently I can't read haha thanks
Sent from my LG-ls990 using XDA Free mobile app
engine95 said:
Just so you guys know, read this. http://forum.xda-developers.com/showthread.php?p=56991878
This won't effect this rom too much as @HPTesla had the kernel about ready for Primtime.
But it does/will effect the future of our beloved G3. When we finally get L, were screwed. Just thought I'd let you all know.
Click to expand...
Click to collapse
That's horrible.
Mahapederdon said:
That's horrible.
Click to expand...
Click to collapse
Tell me about it. It's friggin ridiculous what some people try and pull.
I started looking at n6. If I bought on from Sprint to play with is there gonna be any kind of lock. Or is it strait forward. I still love this phone but reading that article made me a little nervous.
So when we actually do get an official L there's no way of making it flashable?
Related
This is a megathread containing all of the CM9 builds. The first post is straight CM9, someone commits an update and I build it for you people to enjoy. The second post is built by antp121 which has some cool things added (like center clock and Google Now). The third post is built by kryptik06 which has some theming and other cool stuff. The fourth post is by apophis9283 which has a few things added. The fifth post is by Snuzo, which has a custom kernel and other optimizing features added. When you post a question, please remember to mention which one you are on just to make things easier!
__________________________________________________________________________________________________________________________________________________________________________
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 9
Built directly from source, no modifications whatsoever.
Some screenshots:
But you aren't here for screenshots are you? You are here for........................ Download Links!
Latest Build: CM9 Unofficial Build 5/28/2013
GAPPS: gapps-ICS-20120429
Changelog:
5/28/2012
Lots of bug fixes thanks to our great developers.
10/1/2012
Some sort of audio fix
init.d support
9/28/2012
Front camera adjustment to fix Google hangouts and Skype
9/21/2012
Multitouch fix
9/18/2012
Bluetooth wakelock fix
WiFi fix
9/12/2012
Bluetooth media fix
Mobile data fix
Reduce screen flicker and flash
Installation Instructions:
AmonRa Recovery rename to "PH98IMG.zip", place on root of SD card, and flash in bootloader.Instructions for S-OFF:
Download the latest build and place on SD card.
Download GAPPS and place on SD card.
Wipe.
Flash CM9 in recovery.
Flash GAPPS right after.
Reboot and enjoy!
Instructions for S-ON:
Download the latest build.
Download GAPPS.
Download this and rename to PH98IMG.zip S-ON boot.img (Thanks to luis86dr) and place on the root of your external SD.
Md5 = 5a223692ae51ec69110974f9f06ad73b
Reboot to recovery.
Wipe.
Flash CM9.
Flash GAPPS.
Reboot to bootloader and install the PH98IMG (if you get a "parsing" error, extract the boot.img from the zip and flash with fastboot)
Reboot system and enjoy!
Bugs:
MHL HDMI does not work, because MHL is not a part of CM9. So don't complain that it doesn't work.
Bluetooth calling, media works.
Most everything works, occasional freezes or reboots. (Very sparse)
Enable GPU rendering in Developer options to make the keyboard lag go away!Older builds:
CM9 Unoffical Build 10/1/2012
CM9 Unoffical Build 9/28/2012
CM9 Unofficial Build 9/21/2012
CM9 Unofficial Build 9/18/2012
CM9 Unofficial Build 9/12/2012
CM9 Unofficial Build 9/11/2012
CM9 Unofficial Build 9/10/2012
Please take a minute to thank chad0989 for all of his hard work!
Also, thank you to antp121 for helping me with the things that I couldn't figure out.
If chad pushes any updates, I will build and update this as fast as I can.
Enjoy yourself and post any questions!
You may be asking yourself, "What makes this CM9 rom stand out from any other?"
Well, the feature list includes:
1) The new CM10 Boot animation
2) A newer kernel, UBERKERNEL ( Thanks to dmeadows013) which:
- Makes it much more snappier due to having Linaro optimizations.
- newer 3.0.42 kernel
- and most importantly..... CAMCORDER!
I will include cherry-picks and newer features in future builds
DISCLAIMER: Me, Dmeadows, and Chad are not responsible for bricking your phone, starting thermonuclear war, your phone exploding or any other possible (or impossible) side effects
NOTE: Mount Points are different in AOSP based roms. EMMC is the Internal SD and SD Card is the External SD!!!
BUGLIST:
- Runs a stock, 3.0.16 kernel. DO NOT ATTEMPT TO FLASH UBERKERNEL!! YOU WILL NOT BOOT!
- Bluetooth for voice is a no-go
- some people report hearing themselves in-call
- You Tell Me!
TIPS:
- upon first boot, hit the microphone icon in the Google Search box, check the Use Always box on the Bottom, and hit "Google" NOT "Voice Search"
- To reduce lag and speed up keyboard, go into Settings, scroll down and click Developer Options. Scroll down and check "Force GPU Rendering"
- Install a sexy theme from the Play Store and apply in Settings under Themes. I recommend any themes by Nitroz or Hoolm.
- Apply who MIKE D's new wallpaper
INSTRUCTIONS:
1.) Make a Nandroid Backup
2.) Are you sure you made a Backup? Good!
3.) wipe all user data, cache and dalvik cache
4.) Flash the rom
5.) Flash the Gapps
6.) ...
7.) Apply who MIKE D's sexy wallpaper http://forum.xda-developers.com/showpost.php?p=31366149&postcount=630
CURRENT AMOUNT OF DOWNLOADS: 2374!
9-10-2012:
9-10-12
MD5: dfa596db006788aa6affb241fdfa35e4
9-05-12
MD5:bbdff299732bbc16bdc76293b8a9c23b
9-04-12 build 2
MD5 SUM: d0c37b092f6e0dede8902855f6c3802b
LINK (Android FIle Host)
Boot Animation Fix
CREDITS:
Chad0989 - for fixing ril and making this, well, possible! (donate to him)
Dmeadows013 - for making his awesome kernel (and him too)
the Cyanogenmod team and everyone else who helped make this possible
who MIKE D - for the sweet wallpaper!
For all the latest builds, follow me on Twitter!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Changelog:
9-10-12: Bluetooth is fixed! Also, custom wallpaper (thanks who MIKE D!!!) http://forum.xda-developers.com/showpost.php?p=31366149&postcount=630
9-5-12: Include Google Now (thanks mikeyxda) attached is the Stock Google Search zip. just flash in recovery if you dont want google now.
9-4-12: build 2: includes goo manager. should give notifications of new builds.
9-4-12: add center clock, fix boot animation
9-3-12: initial release.
CM9 UNOFFICIAL ROM with Tweaks CDMA
Hi guys! This is A CM9 build I have been working on and I thought I'd share it. Runs very fast and smoothly for me . I will be updating this regularly so make sure to check for updates
Some Features
Tweaks for battery and performance!
Beats/dsp
Zip Align on boot!
Stable! (for the most part)
some others I can't remember
to do:
Customize images
Change bootanimation
add more tweaks!
BUGLIST
Google maps needs data/Wi-Fi location turned on (go to "Common tips" to find fix)
-streaming video FC (gtalk, skype etc) ~ Camcorder does work though
DOWNLOAD
Juice 1.3 (9/22/12)
MD5:117efbc18779f0776eda555f7b5e60e
Juice 1.1 (9-18-12)
MD5:2502fd8d9bcc3eac85a0317234e0d34b
Juice 1.0 (9-13-12)
MD5:7cb32a8d08202a1f670faff308d2bcb7
INSTRUCTIONS:
1.)Make a Nandroid Backup (optional)
3.) wipe all user data, cache, dalvik cache, and /system
4.) Flash the rom
5.) Flash the Gapps
Common TIPS:
-if you are experience GPS problem flash this (MAKE SURE you "mount/system" before flashing the zip)
- If your are experiencing keyboard lag, go into Settings, scroll down and click Developer Options. Scroll down and check "Force GPU Rendering"
CREDITS
Chad0989-Making everything possible!
Awsome-For beats/dsp mod
mv_style
CM-For source
If I forgot anyone let me know I'll def add
Change Log
Juice 1.3 (9-22-12)
-multitouch fix
-changes in the performance tweaks for ui
Juice 1.1 (9-18-12)
-Removed kernel tweaks (seem to cause weird battery drain)
-updated battery script
-Bluetooh battery drain fixed! (thanks to chad)
Juice 1.0 (9-13-12)
-first release
Project "Rachel"
MOVED
http://forum.xda-developers.com/showthread.php?t=1927508
To the left, to the right now y'all
Oops my bad I forgot about the build I was going to post, I was too busy dancing. So finally it's here.
http://www.androidfilehost.com/?fid=9390248398092765614
1/15/13
Reverted to AOKP's Wifi binaries (Gives us native tether)
Reverted to stock source for kernel
A few small optimizations mainly relating to wifi
10/16:
Updated to use htc's wifi binaries
Baked in Funky Kernel v1.3
10/1
Native Tether Working
Linaro Built
Baked in Funky Kernel v1.1
Enjoy and cha cha real smooth!
iamwalterwhite said:
Here is another mega-thread that has a bunch of themes in it for CM9. Thought a reference to it might be useful. http://forum.xda-developers.com/showthread.php?t=1673456
Click to expand...
Click to collapse
Nice.
So this is probably a good place to mention the lack of battery stats and a fairly high drain rate when idle. As mentioned in antp121's thread, I've been having these issues, and they seemed to appear when I flashed the 9/10 build of 'le n00b', but both were fine on the 9/4 build. Perhaps it's an unintended effect of one or more of the changes during that time?
S-OFF
HBOOT 2.27
global firmware
0801r, 0803r radios
Thanks again to all the devs, I really appreciate your work and me being able to use AOSP/CM!
d.kozzer said:
So this is probably a good place to mention the lack of battery stats and a fairly high drain rate when idle. As mentioned in antp121's thread, I've been having these issues, and they seemed to appear when I flashed the 9/10 build of 'le n00b', but both were fine on the 9/4 build. Perhaps it's an unintended effect of one or more of the changes during that time?
S-OFF
HBOOT 2.27
global firmware
0801r, 0803r radios
Thanks again to all the devs, I really appreciate your work and me being able to use AOSP/CM!
Click to expand...
Click to collapse
yeah... its bc meadows kernel doesnt work. once it does, itll be better.
antp121 said:
yeah... its bc meadows kernel doesnt work. once it does, itll be better.
Click to expand...
Click to collapse
Was the kernel the same on the 9/4 build? I thought it was.
d.kozzer said:
Was the kernel the same on the 9/4 build? I thought it was.
Click to expand...
Click to collapse
I think some pmem fixes were merge between then and the next set of builds. I know Chad did something to fix the residual flickers.
d.kozzer said:
Was the kernel the same on the 9/4 build? I thought it was.
Click to expand...
Click to collapse
nope chad's stock kernel is in the 9/10 build. meadows kernel is in the 9/4 build.
so do you guys wanna learn to compile cm9 for the vigor yourself? i threw together a guide http://beta.androidfilehost.com/?fid=9390077933525140148 its a .txt file. just open it up, follow the directions and copy the commands
antp121 said:
so do you guys wanna learn to compile cm9 for the vigor yourself? i threw together a guide http://beta.androidfilehost.com/?fid=9390077933525140147 its a .txt file. just open it up, follow the directions and copy the commands
Click to expand...
Click to collapse
You mean this http://forum.xda-developers.com/showthread.php?t=1810297 ?
GrayTheWolf said:
You mean this http://forum.xda-developers.com/showthread.php?t=1810297 ?
Click to expand...
Click to collapse
yeah. its all the ubuntu stuff, installing dependencies and syncing and building. just more put together. no offense anyone.
A few questions. Is there a way to turn off the leds for the soft buttons, the red leds got old fast? I get a fc when I try to change the messaging app icon for the lock screen shortcut, is there a workaround? Is there a workaround for the torch app?
johnwaynegacy said:
A few questions. Is there a way to turn off the leds for the soft buttons, the red leds got old fast? I get a fc when I try to change the messaging app icon for the lock screen shortcut, is there a workaround? Is there a workaround for the torch app?
Click to expand...
Click to collapse
1. Turn off LEDs, no.
2. Whatever an fc is.
3. Torch works in my build.
GrayTheWolf said:
1. Turn off LEDs, no.
2. Whatever an fc is.
3. Torch works in my build.
Click to expand...
Click to collapse
Force close...
switched to a .pdf thanks to apophis9283 http://beta.androidfilehost.com/?fid=9390077933525140148
s-on boot.img fail
Hi guys,
Having a hard time getting onto one of the cm9 builds. Im trying to run le noob and am on latest ics firmware from android police, came from viper rez 1.0.3, did a factory reset, wiped data, system, cache and dalvik cache. flashed the rom, then went to bootloader and flashed the ph98img.zip that was in the lenood topic on page 91 but it gets stuck on parsing and timeout eventually. I also tried once with rom, gapps, then bootloader but same thing. I checked the md5 on the downloads but am stuck on this one. My bootloader I cant recall because im currently reinstalling my backup but was I think the newest one. It displayed radios and such
Any ideas? Aside from going s-off?
Thanks
edit:
Same thing happened when I tried installing the untouched rom on post 1 and the s-on patch on that post as well...
I have seen a lot of people with the parsing issue.
Maybe a bad PH98IMG?
Any s-on people who successfully flashed this ROM?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
***Disclaimer***I am not responsible if you break your stuff. Use at own risk!
I am not a developer and do not pretend to be one. I'm an Android enthusiast.
Why no Aroma?
Because I've made this ROM to my liking for myself, removing apps I'd never use. I have no need for a customized installer. I'm sharing this with you all because I'm sure there's somebody else who wants a simple, optimized ROM with the basic, stable features. If you want more options or customizations, this ROM isn't for you.
No complaints
I do this in my spare time.
Special requests
I'll accept special requests, but that doesn't mean they'll come true.
Bug Reports
Bug reports are welcome! Keep in mind: This is mostly stock and most bugs will be official firmware bugs.
Updates will come along when I have time and when I see something I'd like changed :good:
ROM: Terok Nor
Based on UEU2CNE2 US Official Firmware
DeKnoxed system and kernel
Deodexed
build.prop improvements
Slimmed down
Busybox
AOSP 4.4 KitKat system sounds
Added AOSP 4.4 ringtones, alarms, notifications, and UI sounds
Removed power on sound
Custom, smaller S Pen pointer
Scrolling Wallpaper enabled in SecLauncher3.apk (TouchWiz Launcher)
Android L Keyboard
Galaxy S5 Boot Animation
SELinux: Permissive
Special Feature: @civato SphereKat blazing fast kernel with S Pen fix! For more info on his kernel, please see the SphereKat thread!
*
Samsung Milk Music - Powered by Slacker
- Milk is supposedly available for all Galaxy devices, except it's not available for all Galaxy devices. I've added it here for you all to enjoy
*
Amazon Kindle for Samsung
Special Note:
* Images are copyright to their respective owners
A GT-N5110
One of the latest recoveries that supports Andoird 4.4. I recommend the latest PhilZ recovery: Found here, flash in ODIN
Bootloader upgrade: With Civato's SphereKat kernel, the 4.4 bootloader upgrade is no longer required!
IF YOU DO NOT MEET THESE REQUIREMENTS.. STOP HERE!
A full wipe is only necessary if coming from a different ROM, including Terok Nor v2. All updates to v3 r1+ can be dirty flashed (unless otherwise noted).
1. BACKUP BACKUP BACKUP!
2. Flash
3. Reboot
(click the image ^)
MD5 hash: 25e41bad0695fc543dd75bde681fefb0
Don't forget to hit the thanks button!
XDA:DevDB Information
Terok Nor v3, ROM for the Samsung Galaxy Note 8.0
Contributors
MrHyde03
ROM OS Version: 4.4.x KitKat
ROM Firmware Required: 4.4.2 Bootloader and TZ
Based On: UEU2CNE2 Official 4.4.2
Version Information
Status: Stable
Created 2014-05-26
Last Updated 2014-08-18
2014-06-30
Release 6
Added Android L Keyboard!
Added Galaxy S5 Boot Animation
Updated @civato 's SphereKat to v4.0
2014-06-10
Release 5
Removed S Note 3.1 (If you want, the install this APK S Note 3.1 APK
Rebuild on UEU2CNE2 US Official Firmware (XAR)
Now released with @civato's SphereKat kernel! Make sure you hit THANKS in his SphereKat thread and send him a beer!
Bootloader upgrade: With Civato's SphereKat kernel, the 4.4 bootloader upgrade is no longer required!
2014-05-28
Release 4
Deodexed /system/app, /system/framework, and /system/priv-app
2014-05-27
Release 3
Corrected issues brought on by R2 where the device would not boot after a clean flash.
2014-05-26
Release 2
Enabled Scrolling wallpaper in SecLauncher3.apk (TouchWiz Launcher)
Corrected Text Cursor offset in framework-res.apk, Thanks Civato
2014-05-26
Release 1
Initial release
Civato
All others who've made modding Android possible
Thanks to all who have donated I hope I can continue bringing a stable, smooth experience to the great people here at XDA :good:
Each * represents an additional donation! Much appreciated!!
rfb813 *
There are currently two versions of S Note installed. The orange-red icon is the new version which is available on the GS5 as a "Galaxy ESSENTIAL". The brown icon is the stock Note 8 version. I may remove one of them in future updates.
STOCK KERNEL AND RECOVERY
Download this zip file and extract. The kernel (boot) and recovery are in their own .tar.md5 archives. Flash each in ODIN.
yay!
@MrHyde03
Regarding the S-pen cursor offset (cursor when hovering above a text with the pen), I fixed it in the framework (for the s-pen pointer I'm still waiting for kernel source, I mailed samssung yesterday for the source)
Here is the file for the framework file.
Decompile the framework and drop it in res/drawable-tvdpi.
When compiling the framework again it will throw some errors.
To slove this:
Go to res/drawable-tvdpi and remove the following files
tw_scrubber_control_focused_holo_red.PNG
tw_scrubber_control_holo_red.PNG
Then go to res/values/strings
open that file and on the line 1795 remove the % before the d and before the 2$s
it should look like this
Code:
<string name="wifi_p2p_enter_pin_dialog_message">Enter the PIN and tap Connect within d seconds to connect to 2$s.</string>
now compile and the errors will be gone.
civato said:
@MrHyde03
Regarding the S-pen cursor offset (cursor when hovering above a text with the pen), I fixed it in the framework (for the s-pen pointer I'm still waiting for kernel source, I mailed samssung yesterday for the source)
Here is the file for the framework file.
Decompile the framework and drop it in res/drawable-tvdpi.
When compiling the framework again it will throw some errors.
To slove this:
Go to res/drawable-tvdpi and remove the following files
tw_scrubber_control_focused_holo_red.PNG
tw_scrubber_control_holo_red.PNG
Then go to res/values/strings
open that file and on the line 1795 remove the % before the d and before the 2$s
it should look like this
Code:
<string name="wifi_p2p_enter_pin_dialog_message">Enter the PIN and tap Connect within d seconds to connect to 2$s.</string>
now compile and the errors will be gone.
Click to expand...
Click to collapse
Awesome. You just saved me some time.:highfive: Also, you don't have to delete the two PNGs, just change the extension from PNG to png. I also emailed Samsung on Saturday but have not had as much as a peep from them. Aren't they required under GPL to release the source when their software is released?
Anyways, thanks again Civ.
Updated to Release 2! Check Change Log for details.
Clean flashing to R2 is broken. Only works if dirty flashing. Because of this I've pulled R2 from the download. Go back to R1 if you're having issues with booting. I know what the issues are, I just don't have time tonight. It's late.
I've udpated the download URL to reflect R1.
MrHyde03 said:
Awesome. You just saved me some time.:highfive: Also, you don't have to delete the two PNGs, just change the extension from PNG to png. I also emailed Samsung on Saturday but have not had as much as a peep from them. Aren't they required under GPL to release the source when their software is released?
Anyways, thanks again Civ.
Click to expand...
Click to collapse
Yep they should release it . But some delay is expected.
Fixed the issues from R2. R3 is out and stable.
I could not get R2 to boot at all past the Samsung splash. I'll download R3 tonight. Thank you.
Sent from my GT-N5110 using XDA Premium HD app
glockman4519 said:
I could not get R2 to boot at all past the Samsung splash. I'll download R3 tonight. Thank you.
Sent from my GT-N5110 using XDA Premium HD app
Click to expand...
Click to collapse
Yep.. that was my fault.. sorry. I didn't properly recompile a few APKs, but we're all good now.
Release three working fine! Thanks and have one on me:4C4716763M934291T.
rfb813 said:
Release three working fine! Thanks and have one on me:4C4716763M934291T.
Click to expand...
Click to collapse
Glad you're enjoying it! Thanks!
2014-05-28
Release 4
Deodexed /system/app, /system/framework, and /system/priv-app
I was beginning to think this ROM wasn't going to install for me. I did an MD5 check - it passed. I flashed the new bootloader firmware and then flashed the PhilZ recovery. Tried to install the ROM and got an Error: Status 7. Tried the newer CivZ recovery and same thing.
Finally got it to install using TWRP 2.6.3 (my favorite, anyway).
Now going to try restoring data from v2.1 and see how that goes.
mletchworth said:
I was beginning to think this ROM wasn't going to install for me. I did an MD5 check - it passed. I flashed the new bootloader firmware and then flashed the PhilZ recovery. Tried to install the ROM and got an Error: Status 7. Tried the newer CivZ recovery and same thing.
Finally got it to install using TWRP 2.6.3 (my favorite, anyway).
Now going to try restoring data from v2.1 and see how that goes.
Click to expand...
Click to collapse
That is odd.. I flashed and reflashed and wiped then reflashed over and over to make sure I didn't have any more duds like R2 was and haven't had any issues with R4. Regardless, I'm glad you got it to flash.
Let me know if you have any other issues.
MrHyde03 said:
Let me know if you have any other issues.
Click to expand...
Click to collapse
Well, don't try restoring data from v2.1, it'll just cause tons of crashes and an error message that the Android UID doesn't match. Guess I'll be TiBU-ing this morning. Just as well, I see that R4 just posted...
mletchworth said:
Well, don't try restoring data from v2.1, it'll just cause tons of crashes and an error message that the Android UID doesn't match. Guess I'll be TiBU-ing this morning. Just as well, I see that R4 just posted...
Click to expand...
Click to collapse
If you're restoring from the same version recovery the backup was created with, then you shouldn't have any issues. That's been my experience. I've always had things break if I restore with a different recovery.
Should you update the firmware to the new Canadian firmware found on samfirmware? It was released after the UK firmware and Canada is closer to the US but there are probably no differences... just asking
TEAM ACHERON PRESENTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Since there is a custom recovery for the SM-T237P now - major thanks to @moonbutt74 - I have a Stock ROM zip available.
Please have a custom recovery installed. Here : http://forum.xda-developers.com/showthread.php?p=57660932
Two versions - Stock (only removed KNOX) and slightly debloated (removed KNOX and most google apps - can be re-downloaded from the play store)
THIS CAN ALSO BE A BASE ROM FOR OTHER DEVs or POTENTIAL DEVs TO USE FOR FURTHER DEVELOPMENT
The CREDITS
TEAM ACHERON - for the love and support
@scarmon25 - Amazing teacher
@lickarock - Amazing teacher and much patients
@bix2010 - Awesome Team member
@bilgerryan - One hell of a Dev & good guy
@ShinySide - root and recovery guide
@safariking - working with him on the SU/Root issues on the tab 4 7in
@AL_IRAQI - for support and ideas
@moonbutt74 - for the dev knowledge, community attitude of helping when you can & Philz recovery for SM-T237P
Testers : Very important - made sure everything works
@VerneVerne - lead tester
@mysticjp @dave5777
@trevortf
Change log :
Code:
Fixed :
Fonts - able to select in settings now
Updated :
SuperSU to V2.48
ROM includes :
ROOT (SuperSU v2.48)
Busybox
init.d support
Adaway (for those that want to get rid of those annoying ads)
Viper4Android (need to install drivers thru the app if you like louder music and more bass)
google DNS tweak
IPv4 & IPv6 speed tweaks
PLEASE HAVE A RELIABLE BACKUP OR ODIN AND SM-T237P FIRMWARE READY TO GO. just in case
INSTALL DIRECTIONS :
download ROM - make sure the MD5 SUM matches (i can't fix a bad download)
Reboot to philz recovery
Get it here : http://forum.xda-developers.com/showthread.php?p=57660932
Wipe to install new ROM (in philz recovery) - or you can manually wipe cache/dalvik cache/data/system
install ROM zip
reboot to system
set up and enjoy
DOWNLOAD LINKS :
Full Stock - No Knox : https://www.androidfilehost.com/?fid=95916177934553859
MD5 SUM : ab03cf13802a81c4c6acb8f97db8517c
Stock - no Knox - debloated : https://www.androidfilehost.com/?fid=95916177934553869
MD5 SUM : 31064fb1ec62083f486335be540ae038
ROM OS Version: 4.4.2 TW Kitkat
ROM Kernel: Linux 3.10.0
Based On: Samsung Firmware
Version Information
Status: stable
Created 2015-02-28
Last Updated 2015-04-11
Click to expand...
Click to collapse
-
IS YOUR SUPERSU UP TO DATE? GO HERE TO FIND OUT
-
Stable : http://forum.xda-developers.com/showthread.php?t=1538053
-
Beta : http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
KNOWN ISSUES :
PLEASE USE THIS BUG REPORT IF YOU WANT A RESPONSE AND TO HELP ME FIX THE PROBLEM
Device:: (device name)
Baseband: (NG2 / NK2 ect...)
ROM Ver: (build number of ROM)
Description: (please state install -full wipe or dirty flash, what's wrong, "possible fixes if known" and a way to recreate the issue)
Click to expand...
Click to collapse
NONE - should all be fixed -
MINE - possible future mods and tips/tricks
Waited al long time for this
FIRST!
Downloading de-bloated version now. will report back with any issues.
Everything running perfectly. Thank you!
Feel free to post any issues you guys come across.
24 hrs
Used device hard for past 24 hrs, no issues so far. :good:
Seems to be working great so far. Thank you
Sent from my SM-T237P using XDA Free mobile app
screen sharing not working
Found first issue, screen sharing not working with Roku3. Thought it was something I deleted so dirty flashed, still no go. Reinstalled stock from backup and works fine.
This is not a deal breaker but, I use it quite often.
stesul411 said:
Found first issue, screen sharing not working with Roku3. Thought it was something I deleted so dirty flashed, still no go. Reinstalled stock from backup and works fine.
This is not a deal breaker but, I use it quite often.
Click to expand...
Click to collapse
I haven't removed any screen sharing apps (all share and direct share).
If you could pull a logcat while trying to connect to your Roku I can see what got messed up.
screen sharing update
I jumped the gun, screen sharing working, issue was with the Roku and wifi connection. Reset Roku and rebooted router.
Good deal.
finally got around to installing, everything looks good so far only thing id like is recovery, download reboot menu but other then that looking good!
mysticjp said:
finally got around to installing, everything looks good so far only thing id like is recovery, download reboot menu but other then that looking good!
Click to expand...
Click to collapse
You can add that easily by installing Xposed Framework, and then the APM+ extension.
mysticjp said:
finally got around to installing, everything looks good so far only thing id like is recovery, download reboot menu but other then that looking good!
Click to expand...
Click to collapse
-
long_tall_texan said:
You can add that easily by installing Xposed Framework, and then the APM+ extension.
Click to expand...
Click to collapse
Wanam kit works as well. That's what I use.
Wow, i have been waiting for this! I will try it out immediately
THANK YOU DEVS!!!
To the Dev - I want to start learning how to create android roms. You said you welcome others to build on what you started here. So what kitchen are you using for this build? Or would you recommend a different one? Thanks !
rrhaskin said:
To the Dev - I want to start learning how to create android roms. You said you welcome others to build on what you started here. So what kitchen are you using for this build? Or would you recommend a different one? Thanks !
Click to expand...
Click to collapse
Or... I can make one for you guys. I personally use archikitchen but has problems with bootanimation in which I don't know why. Anyway, g_ding84 already made a good base so I don't think you would need a kitchen. Just a good file editor and a few more Idk. If you guys want I can perhaps make a custom one on my free time I can't make a custom rom for T330NU because of problems with my base. But g_ding84 base has no problems so why not develop off of it?
-DUHA
rrhaskin said:
To the Dev - I want to start learning how to create android roms. You said you welcome others to build on what you started here. So what kitchen are you using for this build? Or would you recommend a different one? Thanks !
Click to expand...
Click to collapse
I use Ricky's Rom kitchen
Here :
http://forum.xda-developers.com/showthread.php?t=2695356
Very user friendly. With this base SuperSU is already updated, you have INIT.D support and busybox. Only thing you will need to do is deodex the ROM. Which you can do with that ROM kitchen
Be creative, think outside the box....be a hero man!!!! Lol
DUHAsianSKILLZ said:
Or... I can make one for you guys. I personally use archikitchen but has problems with bootanimation in which I don't know why. Anyway, g_ding84 already made a good base so I don't think you would need a kitchen. Just a good file editor and a few more Idk. If you guys want I can perhaps make a custom one on my free time I can't make a custom rom for T330NU because of problems with my base. But g_ding84 base has no problems so why not develop off of it?
-DUHA
Click to expand...
Click to collapse
That what this base is for
Maybe just a good deodexer tool.
On your T330NU ROM - do you have the firmware?
g_ding84 said:
I use Ricky's Rom kitchen
Here :
http://forum.xda-developers.com/showthread.php?t=2695356
That what this base is for
Maybe just a good deodexer tool.
On your T330NU ROM - do you have the firmware?
Click to expand...
Click to collapse
I got the firmware here.
http://forum.xda-developers.com/showthread.php?p=58428539
My base has a broken bootanimation in which could be caused by the new update from archikitchen.
-DUHA
Hello everybody,
I've just compiled PACMAN-ROM for my new Z3C. Current version is PAC-LP MR1 Beta2.
Device trees are CyanogenMod's so probably all device specific CM-bugs will be there too.
The boot.img inside the zip contains CM 12.1 kernel and "Cyanogen Recovery" (no backup right now!).
For alternative recoveries/kernels scroll down to "TESTED - WORKING"...
If the rom is stable for daily use (as I hope) I'm gonna build newer version periodically (depending on PAC & CM updates).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDITS:
2015-07-09:
i've been trying to get rid of the latest problems, i.e. crashing android browser, opera browser, voice recorder and google apps (if installed). tried 4 or 5 builds in the meantime. i've got no idea why and not the skills to search in log files.
if anyone likes to test and find out, i uploaded version from july 4th.
2015-06-25:
New Version - updated CM & PAC sources. Some new PAC features there!
Version is PAC-LP MR1 Beta2 now. Unstable with crashes.
2015-05-24:
New Version - updated CM & PAC sources
2015-05-12/13:
New Version - updated CM & PAC sources
Volume bug on in-call got solved today!
2015-05-01:
I've uploaded an EXTRA boot.img including XZDualRecovery provided by NUT's!
http://nut.xperia-files.com/?ql=34070511dc3ee6809f305c66a5fa122fcbf9dcff
Flash it before or after installing the PACROM zip. It contains the zip's
kernel + DualRecovery. Installing the rom zip will overwrite recovery again
so for backups it might be necessary
to flash it always before installing a new zip, e.g.
2015-04-29:
- Screenshots
- Yes! I got it running. After some hours of use, it seems really smooth & snappy. No reboots.
- How I installed everything: Root on Kitkat stock rom, backup TA-partition, install
Dual-recovery, update to Lollipop rooted, make nandroid backup of hole system,
unlock bootloader, flash PACMAN boot.img, wipe data/caches,
flash PACMAN zip + GAPPS ... quite some hours of work.
TESTED - WORKING:
- 2G, 3G, 4G
- wifi, wifi hotspot
- bluetooth audio
- nfc
- usb otg
- GAPPS (mentioned below)
- titanium backup
- PAC customizations (not all tested)
- video playback on youtube, vlc, mxplayer
- camera & video recording
- GPS using Google Maps
- headphone sound
- XZDR recovery (version 2.8.15 not working): http://nut.xperia-files.com/
- FOTA TWRP recovery (persistent in fota kernel partition): http://forum.xda-developers.com/z3-...12-nightly-t3010550/post58854063#post58854063
- M5 kernel (CM12.1 based): http://forum.xda-developers.com/z3-compact/orig-development/kernel-m5-kernel-t3115498
BUGS:
- phone call volume loud / not reducable in dialer app. (skype & whatsapp calls are alright) solved on 150512
- If alarm clock is set active -> reboot leads to normal shutdown -> deactivate alarm for that case
- photo: Little fish-eye effect on short distance (it's not that little actually)
NOT TESTED YET:
- encryption
Installation notes: Unlocked bootloader required
- flash boot.img (rashr on phone/ fastboot on pc), then boot into custom recovery
- wipe cache, wipe art/dalvik cache
- when coming from a different rom wipe data (factory reset)
- when changing between different gapps packages format system may be useful
- flash rom zip
- if needed flash gapps zip
Download PACMAN: https://www.androidfilehost.com/?w=files&flid=30581
Download GAPPS: http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
Device trees used: https://github.com/filou76/manifest/blob/master/z3c.xml
Credits!!!:
PACMAN project for their great and cool work!! www.pac-rom.com/#Home
All CM developers for giving a solid custom rom ground!!
All Z3C developers who are trying hard to make this great phone ready for daily use, especially those couple of root/bootloader/recovery hackers!! bilbao1 for the great howto root/backup etc! [NUT]'s for this very cool online kernel builder!
Google, of course
Screen shots please...
I guess its a cm based. So we need unlocked bl right?
shakkirk said:
Screen shots please...
Click to expand...
Click to collapse
It's the same as any Lollipop based PAC ROM, so just search the web for pics.
basti2909 said:
I guess its a cm based. So we need unlocked bl right?
Click to expand...
Click to collapse
Yes.
at least a custom rom for z3c. thanks man for your efforts...
basti2909 said:
I guess its a cm based. So we need unlocked bl right?
Click to expand...
Click to collapse
I think PAC is AOSP & CM based. Custom kernel. Unlocked bootloader, yes.
drorcun said:
at least a custom rom for z3c. thanks man for your efforts...
Click to expand...
Click to collapse
Happy to build actually it's not that difficult with CM device support. Probably I'll build some monthly versions or so...
drorcun said:
at least a custom rom for z3c. thanks man for your efforts...
Click to expand...
Click to collapse
just what i wanted to write. big thanks
hope we can see some more, maybe validus/resurrection remix? (maybe i should get me better informed to do it myself^^)
becks0r said:
just what i wanted to write. big thanks
hope we can see some more, maybe validus/resurrection remix? (maybe i should get me better informed to do it myself^^)
Click to expand...
Click to collapse
:good: In case of resurrection remix you only need to add/edit 1 file (local_manifest) to be able to compile a working rom. All the rest it just setting up ubuntu, init/sync repo an start building ...
Hmm it could be a reason to unlock bootloader.,)
XZDualRecovery
I've uploaded an EXTRA boot.img including XZDualRecovery provided by NUT's! http://nut.xperia-files.com/?ql=34070511dc3ee6809f305c66a5fa122fcbf9dcff
Just flash it before or after installing the PACROM zip. It contains the original kernel + DualRecovery. CyanogenRecovery really sucks, not even a way to make backups. Now we can
does this have a camera fix included, or does that need to be flashed separately? I don't have a backed up TA partition, so I rely on the fix for image processing (like many others on here, I'm sure).
thanks in advance and nice to see the ROM!
beflythis said:
does this have a camera fix included, or does that need to be flashed separately? I don't have a backed up TA partition, so I rely on the fix for image processing (like many others on here, I'm sure).
thanks in advance and nice to see the ROM!
Click to expand...
Click to collapse
there's nothing like this included. as far as i know custom roms/ custom kernels can't handle drm keys from TA partition. not sure about flashable drm replacement, i don't think it will work, but maybe it does
perhaps someone knows more about this sony image processing stuff.
isn't that all software based? if so, i could imagine that a good camera app (FV-5 or something like) can bring the same results.
Great work mate. Been running a few hours with the updated boot.img
Hopefully there is no "memory leak"
beflythis said:
does this have a camera fix included, or does that need to be flashed separately? I don't have a backed up TA partition, so I rely on the fix for image processing (like many others on here, I'm sure).
thanks in advance and nice to see the ROM!
Click to expand...
Click to collapse
That fix is only useful on stock Sony based rom's.
bugs update
(1) i found a small, almost funny bug. couldn't reboot to recovery today because phone always ended with shutdown. i desperately flashed the boot.img again but no change. only after deactivating everything i thought not being active at installation the problem disappeared.
well, it's the active alarm, that i use every morning ...
(2) in call volume issue seem's to be somewhere hidden in android_device_sony_z3c/audio/mixer_paths.xml of the repo. just in case someone likes to search :laugh:
I have noticed a small bug, could be just me though. When rebooting while plugged in to the USB charger it goes as far as the Sony logo then freezes until I unplug it. How would I go about submitting a bug report for it?
Sent from my Xperia Z3C using Tapatalk
mrrflagg said:
I have noticed a small bug, could be just me though. When rebooting while plugged in to the USB charger it goes as far as the Sony logo then freezes until I unplug it. How would I go about submitting a bug report for it?
Sent from my Xperia Z3C using Tapatalk
Click to expand...
Click to collapse
Hi, thank's for that! I've just reproduced what you wrote. On my phone this is also connected to active alarm clock. It's rebooting fine when alarm is off. So, quite the same as my last post.
I have no suggestion about real bug reports, because of 2 reasons: this is an unofficial build, primarily for myself ... but shared. I would stop building if Z3C would get official PAC support. And I've just started building roms 2 months ago. So, I'm not having the skills (yet) for advanced debugging. Right now it's more like being voluntary apprentice :laugh: ... I'm gonna add your input it into 1st post.
For now stability of this rom is mainly dependent on PACROM itself and official CM support.
Im glad you could reproduce the same bug. I think you have done a great job mate. I'm loving this ROM and appreciate your efforts. I'm trying to figure the dev side of things myself, not having much luck yet.
Sent from my Xperia Z3C using Tapatalk
Good job, m8!
Can someone post a picture, taken by camera on this phone with this rom ?
A picture of a door , or a wall, for example. Any picture featuring a rectangular shape with straight lines.
I had a broblem be4 on CM12 @z3c , the camera ( any camera app ) took pictures, distorting proportions, like there was a fisheye filter applied
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NATF MegaROM V20
Available for T-Mobile (H918) and AT&T (H910) Variants
ROM Features
(H918 Only) NRD90M 10J Base (December 2016 Patch Level, released January 2017)
(H910 Only) H91010C 10K Base (May 2017 Patch Level)
Stock LG Kernel or Custom Kernel - selectable through Aroma installer
Choice of SuperSU, MagiskSU, or No Root
build.prop tweaks
Increased background app limit
Increased RAM utilization - make the phone use more of our 4GB RAM before dumping apps
Adoptable Storage - use SD card to seamlessly expand on the 64GB we've already got
Aroma Support
Almost 50 optional apps to choose from during a completely modular install
Google Apps, LG Apps, Carrier Apps - ALL optional
3Minit Battery and Clock mods
Viper4Android
Google Assistant available natively with latest Google App update
AND A WHOLE TON MORE!!!
I would like to thank/recognize the following people for their contributions:
@jcadduono - For the original 10d system dump, kernel, and of course for TWRP
@Chainfire - For SuperSU
@nyfl2004 - For our working Viper4Android, 3Minit Battery and Clock modded to the V20, and for all of his help with getting Aroma up and running
@ivicask - For looking through my convoluted Aroma setup and helping identify why it was randomly breaking
@topjohnwu - For his most excellent Magisk and MagiskSU apps allowing our rooted devices to pass SafetyNet and catch 'em all!
@AllTheWay - For providing me with the AT&T system dump needed to port my customizations over, and being my guinea pig to get it booting
@Tilde88 - For all of his work in getting a stable kernel going for the V20, and allowing me to include it in my ROM
@USA-RedDragon - For his Werewolf kernel, and allowing me to include it in my ROM
Current Known Issues:
H918
Some people have experienced skips when listening to music over Bluetooth. I too have had it happen, but it is not at all common, and lasts less than a fraction of a second. Putting your phone either on vibrate or DND seem to help further reduce occurrences.
H910
4.0 is based on 10L, not M, as my dump of that one would not boot. WiFi Calling and VoLTE do work, however.
All Variants
Data Wipe option in Aroma doesn't always work. This is a glitch related to newer hardware and Nougat, as verified on the HTC 10 as well. If you expected your data to be wiped, but it was not, please reboot into TWRP, perform a Factory Reset, and then flash the ROM again. You MUST flash the ROM again after a factory reset, or you will lost systemless root AND your internal storage may encrypt.
Netflix - They have blocked their app from unlocked/rooted devices. You can sideload it from APK Mirror, or use Magisk to hide root from Google Play Store, then clear data on the Play Store. Your device will then show as Certified and all blocked apps will be available.
As any more come up, they'll be added here, and then fixed ASAP.
Pre-Install Steps
If you are not already on TWRP 3.0.2.0-RC8 or higher, do that first! Bootloops and loss of access to recovery is possible with all older builds
Backup your existing ROM
Notes
I recommend wiping data and flashing clean, if coming from another custom ROM. This should not be required, but you may wind up with FCs if you don't. A clean flash is required if you're on an older custom ROM, or older stock based on 10d.
If you're already on an older build of my ROM, you can dirty flash future updates. However if you experience FCs, please do a clean flash
Changelog:
v5.0 T-Mobile
Updated base to 10K (May 2017)
Added Google Pixel Launcher from Android O Beta 2
Updated all Google Apps except Maps
Reverted Maps due to GPS issues for some
Updated Aroma to 3.00 Beta Downgraded back to Aroma 2.70RC2 in fixed build
Cleaned up the app lists somewhat
If Aroma freezes during the install, pull the battery and start again - this only happened to me once, in over 30 test flashes
Rearranged some of the menus for better flow
Spent a good 4 hours rewriting the installer-script to make it look a lot less ugly
Added Werewolf kernel by @USA-RedDragon in place of NotSoStock
Available without root as well
Further tweaked the memory utilization in build.prop, allowing background apps to remain in RAM longer
I think there's a few other changes, I just can't remember them at the moment. Roughly 20 hours into this update, brain is mush.
NOTE: Due to the changes to memory utilization in build.prop, your first boot after the update may cause the phone to lag. This will clear up within 5 minutes, and will not occur after subsequent reboots.
v4.0 T-Mobile
Added New Options for No Root Installs
Stock and NSS kernels available without root
3minit and V4A options still work
Updated all Google, LG, T-Mobile apps
Updated Nova Launcher
Updated Magisk to 11.6 (12.0 finicky on V20)
Removed Adaptive Brightness mod (was glitchy)
Several additional build.prop tweaks
Added Optional Apps
Google Voice
SMS Backup and Restore
Speedtest.net
Removed Pixel Launcher - Assistant interferes
v4.0 AT&T
ROM base updated to 10L (10M won't boot)
Added New Options for No Root Installs
3minit and V4A options still work
Removed Werewolf kernel
Updated all Google, LG, AT&T apps
Updated Nova Launcher
Updated Magisk to 11.6 (12.0 finicky on V20)
Several additional build.prop tweaks
Added Optional Apps
Google Voice
SMS Backup and Restore
Speedtest.net
Removed Pixel Launcher - Assistant interferes
Now some notes and observations:
There was a report of the ROM not froze at the AT&T splash. If this occurs to you, first wait 5 minutes to make sure it really is frozen. Then, pull the battery and then boot up again. The Android is Starting screen will then come up as expected.
There was also one issue where the ROM wouldn't boot past the AT&T splash. For this, boot into TWRP, flash the AT&T boot.img (attached to the download post) using the IMG flash option, then flash Magisk 11.6 (also attached), then reboot as normal. I'm also uploading a patch to AFH, which should automate this process. Give it a try and report back.
Downloads
TWRP
https://build.nethunter.com/test-builds/twrp/lge/
v5.0
H918 for T-Mobile
AFH: https://www.androidfilehost.com/?fid=673368273298960907
MD5: d16b367b4ebdf8551001a32aa7d75636
H910 for AT&T
COMING SOON
v4.0
H918 for T-Mobile
AFH - https://www.androidfilehost.com/?fid=817550096634766880
MD5 - f4b1f90940c40dff3190250a5134f001
H910 for AT&T
AFH - https://www.androidfilehost.com/?fid=457095661767158881
MD5 - 0f89637a0be11a711e61f95e324284a6
See Notes here.
v3.4
H918 for T-Mobile UPDATED on March 24th
AFH - https://www.androidfilehost.com/?fid=745425885120718875
MD5 - aa0def523efbeb471ebdb850d7e9c4e1
H910 for AT&T
AFH - https://www.androidfilehost.com/?fid=745425885120718951
MD5 - d3ce0ee5940ac4b203461eafd039f53d
Older Releases:
v3.3
H910 AT&T ONLY
https://www.androidfilehost.com/?fid=745425885120712176 - FIXED as of March 2
MD5 - 75507cd0c72ae718e0ddd751ba6dea60
v3.2
H918 T-Mobile ONLY
https://www.androidfilehost.com/?fid=457095661767135277
MD5 - 220b70d8ffaa9d8246df0f5e16fbda6a
v3.1
https://www.androidfilehost.com/?fid=817550096634742854
MD5 - 53c5da3c3eb264a0e8af5806b56cda25
v3.0 Fixed (updated 1/24 to address Aroma bugs)
https://www.androidfilehost.com/?fid=817550096634741220
MD5 - 98782147bbae32554a6d41e974442647
See this post for additional information.
1st. Interesting! Glad to see some spark in individuals pushing for their own and making the community grow.
HiddenKnight said:
1st. Interesting! Glad to see some spark in individuals pushing for their own and making the community grow.
Click to expand...
Click to collapse
Yeah, I was big into development in WM 5 and through to WM 6.5 up until I got the Droid X in 2010. It's gonna take some time, but I'm getting back into development as a whole.
Sent from my iPhone using Tapatalk
NotATreoFan said:
Yeah, I was big into development in WM 5 and through to WM 6.5 up until I got the Droid X in 2010. It's gonna take some time, but I'm getting back into development as a whole.
Click to expand...
Click to collapse
Get off that iPhone and the development will come to you like a breeze
HiddenKnight said:
Get off that iPhone and the development will come to you like a breeze
Click to expand...
Click to collapse
Work phone. And Tapacrap is actually useful on iOS.
Sent from my iPhone using Tapatalk
Feedback
@NotATreoFan great job bro, bootup was fast as you advertise, wow, no lags or stutters i can say so far, only issue for me is that some LG apps need to be put back in, namely the LG app updater as Home and App apk has an update as well as the weather widget and Memo for the capture feature, but other than that for me its definitely a good start for a DD, thanks
NotATreoFan said:
[*]Facebook and Amazon stripped out, and they DO NOT install on initial setup
Click to expand...
Click to collapse
Great work on the ROM!
Question, how did you get the post-install apps to not install?
Tilde88 said:
Great work on the ROM!
Question, how did you get the post-install apps to not install?
Click to expand...
Click to collapse
I think it's from one of the LG items I removed. Going to experiment tomorrow morning and see if I can make them install again.
I also realized that I accidentally removed Calendar Storage, so that'll be fixed tomorrow as well.
Sent from my iPhone using Tapatalk
kelvin216 said:
@NotATreoFan great job bro, bootup was fast as you advertise, wow, no lags or stutters i can say so far, only issue for me is that some LG apps need to be put back in, namely the LG app updater as Home and App apk has an update as well as the weather widget and Memo for the capture feature, but other than that for me its definitely a good start for a DD, thanks
Click to expand...
Click to collapse
Yep. I'm going to have Test 6 ready tomorrow with some core functions added back.
Sent from my iPhone using Tapatalk
@NotATreoFan thank you for this broham!!!!!
I just flashed Tilde88's latest and after a night of testing his tonight I will be flashing yours to test out. You all are so highly skilled and keep up the unbelievable work.
When I'm up and running with yours tomorrow I will report back and do a comparison of the 2 ROMs.
If there is anything I can do as far as testing holler at me, I'm down to tear up my phone.
Again, thank you and keep em coming baby!!!!
i got the post-install apps to stop installing by changing the model number in the build prop the the US unlocked version.
Also to the OP how the hell did you get the ROM to deodex successsfully every time I do it i get stuck at the TMO boot animation
albinoman887 said:
i got the post-install apps to stop installing by changing the model number in the build prop the the US unlocked version.
Also to the OP how the hell did you get the ROM to deodex successsfully every time I do it i get stuck at the TMO boot animation
Click to expand...
Click to collapse
It's not deodexed yet. That's my plan for today, along with some bug fixes.
oh ok. Yeah every time i've done it with superRs kitchen i cant get past the TMO boot animation. Someone did successfully do it as there is a rom up thats deodexed.
NotATreoFan said:
It's not deodexed yet. That's my plan for today, along with some bug fixes.
Click to expand...
Click to collapse
you know the bravia reality engine thing the other rom has. Do mods like that (framework) require that the rest of the ROM is deodexed? I know apps needed to be deodexed for editing but didnt know if it affects other mods.
Usually just do CM stuff
Is there any chance you can upload JUST a system IMG? I'm seeing if I can get this working on the US996...
albinoman887 said:
you know the bravia reality engine thing the other rom has. Do mods like that (framework) require that the rest of the ROM is deodexed? I know apps needed to be deodexed for editing but didnt know if it affects other mods.
Usually just do CM stuff
Click to expand...
Click to collapse
I don't believe you need to have the complete ROM deodexed, just the parts you're modifying. But I could be wrong since I've only done this a few times.
monsieurtalbot said:
Is there any chance you can upload JUST a system IMG? I'm seeing if I can get this working on the US996...
Click to expand...
Click to collapse
As soon as I get the latest test build booting, I'll make a system.img and you can try it. There really shouldn't be a reason it wouldn't boot. It just may behave weird if there are files it's not expecting.
Sent from my iPhone using Tapatalk