Hi ,
I have Bell Atrix, unlocked, I flashed the Franch SBF 2.1.1, and all worked well, EXCEPT..
the phone is always roaming, I cannot get data unless I check the Data roaming, there is a little (r) next to my signal all the time..
and I don't know how to fix it..I checked Build.prop, to see if there any setting there.. but I dont know which and what to look for..
my question is: is there a way or a settings that I can change to get rid of the raoaming issue.
as I said my Atrix is BELL and I am with fido..
You need the apn settings for fido, and create an access name under wireless settings - network settings -access point names.
Have a look here:
http://forum.xda-developers.com/showthread.php?t=537829
Cheers!
Bell Atrix Roaming after FR 2.1.1
NFHimself said:
You need the apn settings for fido, and create an access name under wireless settings - network settings -access point names.
Have a look here:
http://forum.xda-developers.com/showthread.php?t=537829
Cheers!
Click to expand...
Click to collapse
I did put the APN for Fido, unless I turn on the roaming data, it does not connect.. also now one seems to explain the (R) next to the signal.. why the Bell Atrix started to show me that its roaming after flashing with FR 2.1.1 sbf.. in on Montreal with FIDO and fido sim in my Atrix..
that is my real question.
Hi,
There are two numbers, MCC, and MNC in the APN, the phone will show roaming if what the network reports is different than what is setup.
MCC (mobile country code) for Canada is 302, you should have that.
MNC (mobile network code) for Fido is 370, if your APN isn't using that then you will be roaming.
http://en.wikipedia.org/wiki/Mobile_Network_Code
The French sbf may not have the canada codes in it's apns.conf, see attached file from the Bell stock firmware, you can replace /etc/apns.conf with that, then go to access point names and reset to default.
Cheers!
NFHimself said:
Hi,
There are two numbers, MCC, and MNC in the APN, the phone will show roaming if what the network reports is different than what is setup.
MCC (mobile country code) for Canada is 302, you should have that.
MNC (mobile network code) for Fido is 370, if your APN isn't using that then you will be roaming.
http://en.wikipedia.org/wiki/Mobile_Network_Code
The French sbf may not have the canada codes in it's apns.conf, see attached file from the Bell stock firmware, you can replace /etc/apns.conf with that, then go to access point names and reset to default.
Cheers!
Click to expand...
Click to collapse
I'll take a look in my apns.conf but it must have the Canada codes as I have been running the french sbf since it was leaked on my Bell version (on Bell) and never had it roam. I just had to add the Bell apn (obviously) and it worked fine.
I do have a question for you though, since you seem to know a lot about these phones, etc. On my last phone (Samsung Galaxy S), there was a secret menu code (like *#*#4636#*#*) that would take you to the network band settings. From there you could not only see what band the phone was running on, but you could SET what bands were active. Is there anything like that on the Atrix? I am curious if the modem in these non Bell sbf's like Telstra/french sbf access the 850MHz band or not.
Hi,
*#*#4636#*#* is the only one I know about. You can set GSM vs GSM only etc, that would be where you'd change bands.
The codes would only be launching an android app/service somewhere, i tried a hex edit and file search of apps, couldn't find it.
Cheers!
NFHimself said:
Hi,
*#*#4636#*#* is the only one I know about. You can set GSM vs GSM only etc, that would be where you'd change bands.
The codes would only be launching an android app/service somewhere, i tried a hex edit and file search of apps, couldn't find it.
Cheers!
Click to expand...
Click to collapse
Thanks for looking. I wasn't sure if you could even manually set anything other then selecting "USA Bands" in 4636. It's no big deal, i'm just used to being able to go in and manually select bands on my previous SGS.
My signal is fine, it was just for curiosities sake.
HI NF
I check my APN. here are the values
Name: FIDO
APN: Internet.fido.ca
USERNAME:Fido
PWD:FIDO
*****
MCC:302
MNC: 370
Those are the only values I have..
this is really strange.. according to the above, I should not be roaming.. but something changed in my phone when I first flashed the French SBF.. and is shows roaming after that flash..
this is really strange..
UPDATE: another problem : when I choose Setting->call Setting->Operator Selector, I notived two things.
the Check box next to Select Automatically is not there, I think it was there when I was on Bell Stock,
next when I choose .. Search Networks.. it searched for long time and phone stops responding, I have to Turn off .
also, when I choose Advanced Setting the Call waiting is greyed out, when I click on Caller ID I get Invalid SIM Error.. again I have to reboot to get the phone working again..
the info I have after *#*# 4636 ...
Nieigbouring CID shows as UNKNOWN..
Roaming: Roaming
NETWORK TYPE:UMTS
not sure if this will you a clue..
Hi,
Sounds like it might be an issue with the radio itself, or it could be that you are just roaming, perhaps a network outage. I would try flashing the telstra sbf, see if you get the same problem. If we had a Bell sbf would could revert back to the stock radio, so we have two options, 1.87 or 1.92. You could try just flashing the radio to see.
In my settings, I have it set to GSM (auto), nothing special there. In network settings, I have it set to automatic, under operator selection, auto is selected. I don't have roaming issues myself with either firmware, but I am not using my phone in your area. Could just be a network update in my area from being in the same boat.
Cheers!
NFHimself..
I followed your instructions about Restore the partitions.. and it works.. I dont have roaming anymore and data work.. you are the man!!! thanks so much for your help
it Worked!!!
I followed your instructions to RESTORE the phone and man.. I was so happy to see it work.. thanks so much for your help..
You're welcome, two times.
Cheers!
I've searched to the best of my ability and can't find much help. My problem is that when I'm any custom ROM (tried about 5 including CM7, CM9 and RootBox JB) I must manually switch APNs when I get a MMS message. So for example, if I receive a picture message, I have to go into my APN setting and manually select my MMS APN, then go back to my messaging app and hit download. Then once it downloads, I have to go back into my APN setting and switch back to my internet APN. On the stock ROM this was not the case. I have all the correct settings, I'm absolutely sure. I've tried editing the apns-conf.xml file to add my carriers settings. Tried flashing without the sim card in. Can't seem to get it to work. I'd really appreciate any help you guys can provide.
Combine them
allyourbase said:
Combine them
Click to expand...
Click to collapse
I assume you mean combine the two APN settings. I've tried that. All that does is leave me without internet or mms capabilities.
Seriously? what provider do you have? I'm guessing since you're in the USA judging by the american flag in your profile that you're on ATT or straight talk? Telling us what provider you have would help quite a bit..
Edit, I thought help me, help me I'm dying questions belong in the QnA forums?
Sorry, knew I was forgetting something. My carrier is Viaero. I live in the middle of nowhere in Colorado so its basically the only option. AT&T doesn't cover our area. And now this isn't an urgent issue, just something that kind of annoying. All I was looking for were some ideas on how to remedy the situation, so I thought general would be more appropriate.
Post both apns please
I've verified these with Viaero and with another SII running stock. also had an unlocked iPhone before which these worked with. Another side note, on custom roms if I put in the "APN TYPE" I get neither internet nor MMS. So I have to leave those blank to get it to work at all.
NAME
Viaero Connect
APN
internet.vedge.com
APN TYPE
internet
NAME
Viaero MMS
APN
mms
MMSC
http://mms.viaero.com
MMS PROXY
10.168.3.23
MMS PORT
9401
APN TYPE
mms
Did you ever figure this out? I have the same issue.
For MMS Part .... change port number "9401" to just blank
I recently Tried to use my ATT SIM with my Dinc4G, I had to add an APN but it worked 100%, Voice and Data.
When I went back to my Verizon SIM, I found I had no data...
It hasn't come back at all for a couple days now, when I reset t o defualt APN I see the Verizon APN and even got screenshots of the settings
Problem is it changes back to some APN with wrong settings almost immediately, and I cannot change that APN.
Adding New a New APN causes that APN to disappear, and the name of the locked one to change. The information is still wrong, can't be changed and I have no data...
At a loss here, can't figure out whats happening. I even put my SIM in my Galaxy Nexus... and THAT didn't have a data connection either....
Are you rooted?
I've had the same problem after testing out an AT&T SIM, and there seems to be something wrong with the way Dinc4 tries to reset APN data to defaults.
There might be a better/easier/more proper way to fix it, but the only one I found was to edit APN database directly using a SQLite editor. Obviously, needs root access for that.
If you are, in /data/data/com.android.providers.telephony/databases check telephony.db and cdmaapn.db files.
Insertnamehere12 said:
I recently Tried to use my ATT SIM with my Dinc4G, I had to add an APN but it worked 100%, Voice and Data.
When I went back to my Verizon SIM, I found I had no data... Most likely (or at least for me), APN's #13 and/or 25 might have wrong settings.
It hasn't come back at all for a couple days now, when I reset t o defualt APN I see the Verizon APN and even got screenshots of the settings
Problem is it changes back to some APN with wrong settings almost immediately, and I cannot change that APN.
Adding New a New APN causes that APN to disappear, and the name of the locked one to change. The information is still wrong, can't be changed and I have no data...
At a loss here, can't figure out whats happening. I even put my SIM in my Galaxy Nexus... and THAT didn't have a data connection either....
Click to expand...
Click to collapse
This is really doing my head in as I'm not a techy type of guy :crying:
I have HTC One A9 and I have data connection issues that I can't seem to get around. I just ported my old number to a o2 sim and although I can make call I can't get the data connection started. It seems as I insert the sim, it doesn't populate with APN setting. I've tried manual settings and doing network reset. Nothing seems to work
The screen keeps showing "access point names are not available for this user".
I've done a factory reset and that didn't work. When I used other Sims the APN setting populate right away, so it seems my phone is having trouble setting up APN with this particular sim ??
I am putting this here in case anyone runs into a similar issue. When I first got my 7T Pro I could not edit my APN settings which meant I wasn't able to make my mobile data work. For some reason, all the settings were greyed out and I did not have the "+" icon at the top to add a new APN profile.
I did however found a solution. I borrowed an active SIM card from a friend and inserted it into the second SIM slot while my own SIM card was occupying the first slot. This allowed me to add and edit APN profiles. I don't know why or how but it worked, maybe it had something to do with the network? I'm with Telus, my friend is with Koodo. As far as I know, Telus and Koodo are one of the same so I don't know if network plays a factor in this.
Anyhow, I'll leave this here for someone to try if they ever run into a similar issue!