Galaxy S5 Sport SM-G860P Stock Roms
OH1 stock Lollipop Kernel added to the bottom of this post!
Kitkat 4.4.2 NG3 Stock Deodexed ROM
This is a base test version.
Someone please backup, flash with custom recovery and let me know how it goes in case I need to make some further changes.
Download Link -- > SM-G860P_NG3_ROOTED_DEODEXED.TEST.zip
Deodexed Rom Features (so far):
- root included
- busybox
- init.d support/repacked kernel
Full Stock Tar Recovery
Restore the phone back to stock.
Download Link -- > G860PVPU1ANG3_G860PSPT1ANG3_SPR.zip
Custom Recovery:
Flash custom roms and mods.
[RECOVERY] CWM S5 Sport SM-G860P
Instructions to Install Tar Files with Odin
• The full tar does not wipe Data or internal SD.
You may want to do a full wipe in custom recovery before flashing full tar if you have issues with data apps.
• Extract (unzip) the firmware file
• Extract Odin -- Odin v3.09 Download Link
• Power down the phone (or pull the battery, it is important to flash the OTA from a powered off state)
• Open Odin v3.09
• Boot the phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the firmware/recovery file to AP / PDA (depending on version of Odin)
• For modems, add the file to CP / PHONE (depending on version of Odin)
• Make sure re-partition is NOT ticked
• Click the start button, sit back and wait a few minutes
I think its possible to flash a Sprint SM-G900P 4.4.2 rom on this phone if you follow the following steps:
1. Have custom recovery already installed and a backup in place in case you need to flash back.
2. Place the rom and stock kernel on phone SD
3. Boot into custom recovery, do a full wipe
4. Install the SM-G900P touchwiz based rom, do not reboot yet
5. Flash the stock SM-G860P _NG3_Stock_Kernel.zip provided in Post #1.
6. Restart the phone
@SeanRinVA and @wolfleatherworks :
You guys have showed interest in getting MOAR on your SM-G860P phones, so I thought I'd mention you here to help you find this thread. Make sure to have a nanoid backup beforehand and let everyone know how it went.
I'd watched the MOAR thread for a while, but it wasn't compatible with the SM-G860P (hung boot).
Sent from my SM-G860P using Tapatalk
SeanRinVA said:
I'd watched the MOAR thread for a while, but it wasn't compatible with the SM-G860P (hung boot).
Sent from my SM-G860P using Tapatalk
Click to expand...
Click to collapse
@tdunham just posted this yesterday and the second post this morning, but yes, he's looking for someone to test it (neither of us have the G860). If you have the time, could you give this a try and post back success or failure? Especially if you can get MOAR installed.
Ramer said:
@tdunham just posted this yesterday and the second post this morning, but yes, he's looking for someone to test it (neither of us have the G860). If you have the time, could you give this a try and post back success or failure? Especially if you can get MOAR installed.
Click to expand...
Click to collapse
I can test it tonight. I've downloaded the Kernel...now to download the latest MOAR.
I've got an S5 Sport, just picked up today. Will be testing the kernel with MOAR.
---------- Post added at 08:32 PM ---------- Previous post was at 07:58 PM ----------
Well it doesn't seem to be boot looping, I'll let it sit and cook for a bit longer. Currently it's just flashing the android white text and disappearing, not sure how long it should normally be on 1st boot.
---------- Post added at 08:46 PM ---------- Previous post was at 08:32 PM ----------
Doesn't seem to have worked, I waited a good while but it didn't go any further. Attempted downloading your Rooted Deodexed test but it downloads as a 0kb file.
EDIT: Tried another mirror, seems to be downloading properly now.
---------- Post added at 09:34 PM ---------- Previous post was at 08:46 PM ----------
Got it downloaded, copied over via adb -- attempted install, getting (bad) - installation aborted.
---------- Post added at 09:42 PM ---------- Previous post was at 09:34 PM ----------
Confirmed MD5 match. Ideas?
KrimsonStarfly said:
Doesn't seem to have worked, I waited a good while but it didn't go any further. Attempted downloading your Rooted Deodexed test but it downloads as a 0kb file.
EDIT: Tried another mirror, seems to be downloading properly now
Got it downloaded, copied over via adb -- attempted install, getting (bad) - installation aborted.
Click to expand...
Click to collapse
I'm not sure what adb was for. You don't have drivers installed with a running rom so you can copy everything over to the phone?
Did you download the stock rom last night because the stock rom last night had a problem and has since been replaced. The one you should have the same name as the link in the OP. I even flashed it to make sure it would at least run.
tdunham said:
I'm not sure what adb was for. You don't have drivers installed with a running rom so you can copy everything over to the phone?
Did you download the stock rom last night because the stock rom last night had a problem and has since been replaced. The one you should have the same name as the link in the OP. I even flashed it to make sure it would at least run.
Click to expand...
Click to collapse
I was using ADB since I didn't want to restore from backup until I was done testing. I'll try re-downloading and doing it over again to see if I can get it working, I'm off work today so now is the perfect time to try it further.
So this has me stumped -- For some unknown reason, I seem to be unable to copy over SM-G860P_NG3_ROOTED_DEODEXED.TEST.zip using MTP. I fiddled with drivers for the last hour and i'm at a loss -- it doesn't seem to be a driver problem, I can copy over MOAR and other files, but it won't let me copy over your test at all.
tdunham said:
I think its possible to flash a Sprint SM-G900P 4.4.2 rom on this phone if you follow the following steps:
1. Have custom recovery already installed and a backup in place in case you need to flash back.
2. Place the rom and stock kernel on phone SD
3. Boot into custom recovery, do a full wipe
4. Install the SM-G900P touchwiz based rom, do not reboot yet
5. Flash the stock SM-G860P _NG3_Stock_Kernel.zip provided in Post #1.
6. Restart the phone
Click to expand...
Click to collapse
Ramer said:
@tdunham just posted this yesterday and the second post this morning, but yes, he's looking for someone to test it (neither of us have the G860). If you have the time, could you give this a try and post back success or failure? Especially if you can get MOAR installed.
Click to expand...
Click to collapse
works booted up with moar rom :good:
---------- Post added at 09:39 PM ---------- Previous post was at 09:33 PM ----------
tdunham said:
Galaxy S5 Sport SM-G860P Stock Roms
Kitkat 4.4.2 NG3 Stock Deodexed ROM
This is a base test version.
Someone please backup, flash with custom recovery and let me know how it goes in case I need to make some further changes.
Download Link -- > SM-G860P_NG3_ROOTED_DEODEXED.TEST.zip
Deodexed Rom Features (so far):
- root included
- busybox
- init.d support/repacked kernel
Full Stock Tar Recovery
Restore the phone back to stock.
Download Link -- > G860PVPU1ANG3_G860PSPT1ANG3_SPR.zip
Custom Recovery:
Flash custom roms and mods.
[RECOVERY] CWM S5 Sport SM-G860P
Instructions to Install Tar Files with Odin
• The full tar does not wipe Data or internal SD.
You may want to do a full wipe in custom recovery before flashing full tar if you have issues with data apps.
• Extract (unzip) the firmware file
• Extract Odin -- Odin v3.09 Download Link
• Power down the phone (or pull the battery, it is important to flash the OTA from a powered off state)
• Open Odin v3.09
• Boot the phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the firmware/recovery file to AP / PDA (depending on version of Odin)
• For modems, add the file to CP / PHONE (depending on version of Odin)
• Make sure re-partition is NOT ticked
• Click the start button, sit back and wait a few minutes
Click to expand...
Click to collapse
i tried SM-G860P_NG3_ROOTED_DEODEXED.TEST.zip but it aborted and said bad could be the . between DEODEXED and TEXT i try to rename but then it wouldnt let me put it on my phone. just a though
1991mustang50 said:
works booted up with moar rom :good:
---------- Post added at 09:39 PM ---------- Previous post was at 09:33 PM ----------
i tried SM-G860P_NG3_ROOTED_DEODEXED.TEST.zip but it aborted and said bad could be the . between DEODEXED and TEXT i try to rename but then it wouldnt let me put it on my phone. just a though
Click to expand...
Click to collapse
I accidentally added a space in the filename. I did flash it to test but now I think I removed the space in the name before doing so. If possible, try downloading to pc first and let me know how it goes in case I need to reupload it to the hosting site with a corrected filename.
1991mustang50 said:
works booted up with moar rom :good:
Click to expand...
Click to collapse
So, I'm not attempting to be dumb here, but it might be inevitable.
G900 stock roms boot with G860 kernel?
I use MOAR ROM(havent tried any other roms yet) for 900P and the the kernel zip in post #1 and using steps in post #2 I am running on it now
Great. Being a stock-based ROM, I would imagine that all stock Roms work with G860 kernel. Consequently, all AOSP ROMs should work with a kernel compiled for G860. There are 2 new G860s in the house and my intent was to compile CM11/12 for the Sport; however, if all that is necessary is the kernel&modules I won't bother pulling blobs.
Thanks. The phones aren't entirely at my disposal or I would do more testing.
tdunham said:
I accidentally added a space in the filename. I did flash it to test but now I think I removed the space in the name before doing so. If possible, try downloading to pc first and let me know how it goes in case I need to reupload it to the hosting site with a corrected filename.
Click to expand...
Click to collapse
Redownloaded still a no go it just go to opening update and then fails sorry for bad news thanks for trying
It works!
I used the instructions here to install the rom for the G900P as linked to below. I've messed with it only for about 20 minutes but it worked perfectly fine! So much bloatware though, and I'm coming from the S3 scene and am not too familiar with what the G900P had to offer in terms of custom ROMs. If anyone knows a good lightweight one with powerful customization options please let me know so I can try it. I am doing my first backup of this ROM as I type this and will also be doing a restore of my previous ROM (stock with the bloatware removed manually) for now and will probably tweak the MOAR ROM more later this week. Just want to say thank you to everyone in this thread, you guys are amazing!
http://forum.xda-developers.com/showthread.php?t=2790808
I'm going to give the MOAR of try with the kernel from post one.. I really do hope that more development comes to this phone..
doubledragon5 said:
I'm going to give the MOAR of try with the kernel from post one.. I really do hope that more development comes to this phone..
Click to expand...
Click to collapse
Well, at least you guys can run a custom rom now.
I wish I could be more help but I have the SM-G900P but thought I'd take a shot at getting the Sport a little help.
tdunham said:
Well, at least you guys can run a custom rom now.
I wish I could be more help but I have the SM-G900P but thought I'd take a shot at getting the Sport a little help.
Click to expand...
Click to collapse
I saw a couple of links in the recovery thread for the sport full resotore.. One link the files are over a gig, the other one is for about 848mb.. I wounder which is the real deal... The first link I could not download crap, but the second one I did. BTW is the modem included in your file for your rom?I was woundering because if I flash MOAR were can I find the modem or does it matter
Related
First time rooting / installing rom quick question
Looking to flash phone to villianrom 3.0 from what i read on the 2.4 version older posting it says to root with CF-root first. In the new 3.0 version posting it says it includes Ninphetamine kernel and the instructions assume you have clockwork mod already and can install zip from sd, Do i still need to CF-root before running 3.0 or does the Ninphetamine kernel Root automatically from the 3.0 zip??
Thanks
You need first of all a kernel wit CWM then you can flash custom firmwares through it from a .zip-file on your sd.
The new version will bring root with it through the kernel but you are not able to flash it unless you have CWM if it comes as a .zip-file
So for the first time flash a rooted kernel that includes CWM through "Odin" and then you are free to flash anything you want through CWM.
Hope that answers your question.
brunobanane said:
You need first of all a kernel wit CWM then you can flash custom firmwares through it from a .zip-file on your sd.
The new version will bring root with it through the kernel but you are not able to flash it unless you have CWM if it comes as a .zip-file
So for the first time flash a rooted kernel that includes CWM through "Odin" and then you are free to flash anything you want through CWM.
Hope that answers your question.
Click to expand...
Click to collapse
Could this be a problem I am having
I have rooted my phone and copied villianrom to my sd card.
When I go through CWM and delete wipe does that also wipe my root?
When I try to install the ROM i keep getting error messages
Did you install the Ninphetamine kernel first...
No good complaining its not working if you skip steps....
What kernel did you flash to get CWM ?
Should all work fine if you follow the steps presented in the VillainRom post...
ultramag69 said:
Did you install the Ninphetamine kernel first...
No good complaining its not working if you skip steps....
Click to expand...
Click to collapse
Sorry I thought it was included in the ROM?
Sorry not that clued up on all this
---------- Post added at 08:31 AM ---------- Previous post was at 08:29 AM ----------
brunobanane said:
What kernel did you flash to get CWM ?
Should all work fine if you follow the steps presented in the VillainRom post...
Click to expand...
Click to collapse
I just flashed Frankensten kernal and downloaded ROM Manager from market
serpicoUK said:
Sorry I thought it was included in the ROM?
Sorry not that clued up on all this
---------- Post added at 08:31 AM ---------- Previous post was at 08:29 AM ----------
I just flashed Frankensten kernal and downloaded ROM Manager from market
Click to expand...
Click to collapse
im not to familiar with Frankenstein kernels. what you should of done is rooted first your phone with one of the CF kernels..do that through odin..that will get your phone rooted..once you do that then you can flash any rom you like but always follow the guide from the thread of the rom you going to flash
EDIT: if you flash CF-root your rooted..go to development original and go on the thread and follow the guide...its through odin if i remember well its been a while lol but once you do that you will have all the perks of been rooted...
once you do that download the rom you want and just flash away through recovery or CWM manager....but do your reading and back up your rom first before you do flash
Matriak31 said:
im not to familiar with Frankenstein kernels. what you should of done is rooted first your phone with one of the CF kernels..do that through odin..that will get your phone rooted..once you do that then you can flash any rom you like but always follow the guide from the thread of the rom you going to flash
Click to expand...
Click to collapse
I followed these instructions and flashed insecure Kernal then the it was actually this one after
GT-I9100_XXKI3_original
http://reviews.cnet.co.uk/mobile-phones/how-to-root-your-samsung-galaxy-s2-50004972/
Did you try flashig through RomManager or by booting the phone into CWM recovery?
---------- Post added at 09:46 AM ---------- Previous post was at 09:44 AM ----------
Hmm...give this approach a try.
http://forum.xda-developers.com/showthread.php?t=1103399
brunobanane said:
Did you try flashig through RomManager or by booting the phone into CWM recovery?
---------- Post added at 09:46 AM ---------- Previous post was at 09:44 AM ----------
Hmm...give this approach a try.
http://forum.xda-developers.com/showthread.php?t=1103399
Click to expand...
Click to collapse
I flashed the ROM through Android system recover (3a)
is that CWM recovery?
I managed to get villianrom welcome screen but it just keeped flashing for about 10mins and wouldn't reboot properly
---------- Post added at 08:51 AM ---------- Previous post was at 08:49 AM ----------
brunobanane said:
Did you try flashig through RomManager or by booting the phone into CWM recovery?
---------- Post added at 09:46 AM ---------- Previous post was at 09:44 AM ----------
Hmm...give this approach a try.
http://forum.xda-developers.com/showthread.php?t=1103399
Click to expand...
Click to collapse
Excellent
Thanks
So If I flash that Kernal and then install villianrom through CWM then it should work and still be rooted?
Nope that isn't CWM.
Jep, follow the steps for CF-root, then from the rom and then all will be fine and with root.
brunobanane said:
Nope that isn't CWM.
Jep, follow the steps for CF-root, then from the rom and then all will be fine and with root.
Click to expand...
Click to collapse
Once I have flashed the new ROM will I need to install i new Kernal or will it be included?
serpicoUK said:
Once I have flashed the new ROM will I need to install i new Kernal or will it be included?
Click to expand...
Click to collapse
it will be included
Now that you are rooted back up the rom first before you go ahead and start your journey of flashing...
Matriak31 said:
it will be included
Click to expand...
Click to collapse
Ok think I am getting it now, not sure why I am so stupid this time as I have rooted my Hero and Orange San Francisco first time around.
One last thing.
Is ROM Manager and CWM the same?
I have ROM Manager installed and my phone is rooted, can I not just flash the CF-ROOT from my sd card?
Instructions - If you already have CF-Root
- Copy the zip file to your SD card
- Stop sharing SD card with computer over USB, unplug the cable, etc
- Applications -> CWM -> Flash kernel. Select the ZIP file on your SD card.
- Done
I think RomManager is just an app that can flash roms, do backups and other things by using CWM.
But I'm not that familiar with Rom Manager so I don't know much about it.
As I said I don't know what things you can do with RomManager but I would flash the kernel with Odin, thats the save way.
For the instructions...I think that means if you have a previous version of CF-Root and already have CWM.
brunobanane said:
I think RomManager is just an app that can flash roms, do backups and other things by using CWM.
But I'm not that familiar with Rom Manager so I don't know much about it.
As I said I don't know what things you can do with RomManager but I would flash the kernel with Odin, thats the save way.
For the instructions...I think that means if you have a previous version of CF-Root and already have CWM.
Click to expand...
Click to collapse
So installing that Kernal will not cause any harm if my phone is already rooted?
No.
Even if it would you could just flash a stock firmware back again and start from zero.
brunobanane said:
No.
Even if it would you could just flash a stock firmware back again and start from zero.
Click to expand...
Click to collapse
Thanks for all you help
Another thing I have noticed is when I wiped my phone it reset itself as normal but all my media and photos where still there even though I copied them over to my sd card just incase, is this normal?
No problem.
Jep that is normal. It just wipes your system. If you want to wipe your phone of all your files and reset the system than you need to do it with a combination in the dialer. *2767*3855# but watch it...the process starts right after you insert the # no question if you really want to!
brunobanane said:
No problem.
Jep that is normal. It just wipes your system. If you want to wipe your phone of all your files and reset the system than you need to do it with a combination in the dialer. *2767*3855# but watch it...the process starts right after you insert the # no question if you really want to!
Click to expand...
Click to collapse
That's cool.
Dont want to just wasn't sure if it was working correctly.
Dont have anything to really back up so will do it all tonight once home from work
cheers
Have a good weekend
Thanks to braway and Blue1k,
braway gave most of the instructions, and Blue1k provided the system.img file.
All I did was testing and uploading.
I'm not responsible for anything that will happen to your device;
I tried it and it worked without ANY problem:
My flash counter is still at 0, I have TELUS Stock system/kernel etc. and I have ROOT.
Download these files:
TELUS system backup from a TELUS Note Rooted by Da_G's kernel:
http://www.mediafire.com/?4229vkvbrkz9y8d,kc6xrajpg3klpm2,3kwo3lpmn9q7jvt
(Sorry for part files, mirrors will be appreciated.)
ODIN3 v1.85:
http://forum.xda-developers.com/attachment.php?attachmentid=986462&stc=1&d=1333721477
Test the archive file before you flash, make sure it's not corrupted!
Instructions (copied from: http://forum.xda-developers.com/showthread.php?t=1518962 , Thanks to roloracer)
1. Turn off your phone and uplug it. Take the battery out of your phone, put it back in, and hold the volume down button and power button at the same time. Keep them held down until the phone starts buzzing and you see the Samsung name.
2. At this point you are either in download mode or the phone will tell you to hit volume up, at which point you'll be ready.
3. Run Odin on your PC -- right click and choose "Run as Administrator" just to be safe.
4. Plug your phone into your PC.
5. In the Odin screen, wait until one of the top boxes turns yellow and displays some numbers.
6. UNCHECK all the boxes except for Auto Reboot.
7. Unzip the file that you downloaded.
8. Hit the PDA button and navigate to telus-rooted-system.tar.
9. Hit start
10. wait until your phone reboots.
11. If it didn't work, try rebooting and starting from scratch.
12. Install Superuser app from Play Store: Superuser
Is this complete original telus system but rooted? including the boot animation? I need to exchange my note and this would be perfect if so
smurcoch said:
Is this complete original telus system but rooted? including the boot animation? I need to exchange my note and this would be perfect if so
Click to expand...
Click to collapse
As far as I know Boot animation is in kernel image, not system:
http://forum.xda-developers.com/showthread.php?t=1506330
II believe the first boot image that pops up is kernel. Next the boot animation loads. Anyways it seems i should have checked that thread first as i got a reply. op got my thanks either way
Doe this Telus stock image file have stock recovery in it ?
---------- Post added at 07:04 PM ---------- Previous post was at 07:01 PM ----------
I have to return my phone because battery cover will not stap tight any longer. I have replacement warranty through bestbuy canada, I woud like the software on it to look stock telus. My orginal back was done with cwm b1 and is corruptaed.
pterry30 said:
Doe this Telus stock image file have stock recovery in it ?
Click to expand...
Click to collapse
No, only system.
You can get stock TELUS recovery image from here:
http://dl.dropbox.com/u/50890302/recovery.img
Not ready to flash with ODIN, you'll need to search to do that If you don't know.
thanks, the 3 individual files, how do you make them into one tar file ? Do you extract them to all one file or is it automatic when you extract each of the 3 files ?
---------- Post added at 07:29 PM ---------- Previous post was at 07:25 PM ----------
i believe, i should be able to use adb if there is not a odin file for stock recovery yet.
misunderstanding.
pterry30 said:
thanks, the 3 individual files, how do you make them into one tar file ? Do you extract them to all one file or is it automatic when you extract each of the 3 files ?
---------- Post added at 07:29 PM ---------- Previous post was at 07:25 PM ----------
i believe, i should be able to use adb if there is not a odin file for stock recovery yet.
Click to expand...
Click to collapse
the tar is in the 3 files you downloaded which are Rar archives. Extract using WinRAR....LOL
---------- Post added at 11:48 PM ---------- Previous post was at 11:33 PM ----------
[/COLOR]Did you pull the Telus stock recovery by using adb ?
This is a Telus Stock Recovery zip, just flash through CWM. I got the recovery image from Jckpsa and Braway made the stock recovery file zip file.http://thinkleet.de/cwm/stock_telus_recovery.zip I can conform it does work. You now have a stock recovery again
Would you have a Telus radio image. There are a couple floating around in forum but they will not install ?
Sent from my SGH-I717D using xda premium
1+ for the Stock GB Telus Radio Baseband:LA2...(need it in a CWM .zip pls)
Heres where the ICS Telus modem is.... http://forum.xda-developers.com/showthread.php?t=1581084
deleted from my SAMSUNG-SGH-I717 using xda premium
goalcam said:
Telus radio - http://www.mediafire.com/?nws1hn3wiof639e
Click to expand...
Click to collapse
I think this is the Gingerbread Telus radio
deleted
Sent from my SAMSUNG-SGH-I717 using xda premium
Anyone have a link to the best Root method for TELUS Note running ICS?
I have searched here but not finding ICS root just the JB version.
Mike
telephonemike said:
Anyone have a link to the best Root method for TELUS Note running ICS?
I have searched here but not finding ICS root just the JB version.
Mike
Click to expand...
Click to collapse
Here is da link. i hope OP doeasnt mind, this works on ICS note. i have rogers one. works fine. just follow da video if u have confusion
http://rootgalaxynote.com/galaxy-no...y-note-sgh-i717-icsgingerbreadeasiest-method/
Stock stock rom??
Do any of you good people know where i >working< stock rom for samsung note i717 telus there is?
Thank you
telephonemike said:
Anyone have a link to the best Root method for TELUS Note running ICS?
I have searched here but not finding ICS root just the JB version.
Mike
Click to expand...
Click to collapse
WWW. Google.com
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Hi,
a few weeks ago I got a Samsung X Cover 2 after my loved Defy boke down...Thanks to the rooted image that theboegl created I examined the device and started to port CWM to the device. Some photos of CWM on the S7710 are here. Sorry - cant post outside links before I did 10 posts....attached.:silly: Thanks to OliverG96 who worked on CM for the S3 mini that is quite similiar to the skomer it wasn't a hard job to get it running.
The source is on my github account. (no link - see above - just google: github flxo). Feel free to comment and improve....
Code:
sudo heimdall flash --pit skomer.pit --Kernel2 recovery.img
DISCLAIMER: Use this recovery image at your own risk! You are responsible to any harm that is caused to your device during the use of this software.
Download
Mirror
CWM Changelog:
2013/07/08: Added kernel build with source from Samsung Open Source. Fixed external_sd stuff that enabled restore and backup to the sd.
2013/07/09: Fixed CWM boot loop (reboot recovery menu item or reboot syscall). Updated j4fs and param kernel modules.
2013/07/11: Added ext4 capabilities to installer (needed for otapackage). Updated fstab with reserved area at the partition end.
2013/07/19: Updated to version 6.0.3.3. edit: weird reboot issue.
2013/07/19: Updated to version 6.0.3.6 (cm-10.1). Sideload still not functional.
2013/11/03: Updated to version 6.0.4.4 (cm-10.2).
2013/11/09: Fixed USB and sideload. Do not use.
2013/11/14: Updated to version 6.0.4.5. Added param and j4fs modules to recovery.
2014/01/12: Updated to version 6.0.4.6. <-- USE THIS VERSION
TWRP Changelog:
2013/12/07: Initial TWRP version from Omnirom 4.3 branch
2013/12/21: Source update. Minor kernel fixes.
Thanks for your work!
For those who want to try this beta-build:
download the newest odin-flashable build from here - thanks to @flxo
start Odin >= 3.07
select the downloaded CMW in the PDA section
unselect autoreboot if you would like to test it after flashing immediately
plug your XCover2 in
flash it
let it reboot/if you want to test cwm now:
power off by holding the power button
hold Volume +, Home and Power button simultaneous
you should see cwm
done
BTW: no one should just follow me by doing a reboot recovery, though I have created an odin-flashable restore - build 12.07.2013 for getting out of the "boot to recovery" loop without loosing data.
flxo said:
Hi,
a few weeks ago I got a Samsung X Cover 2 after my loved Defy boke down...
Thanks to the rooted image that theboegl created I examined the device and started to port CWM to the device. Some photos of CWM on the S7710 are here. Sorry - cant post outside links before I did 10 posts....attached.:silly:
Thanks to OliverG96 who worked on CM for the S3 mini that is quite similiar to the skomer it wasn't a hard job to get it running.
The source is on my github account. (no link - see above - just google: github flxo). Feel free to comment and improve....
I did not try yet to flash a zip with the CWM port but so far the graphics look good and the SD is mounted. I attached the recovery image to this post:
Hang on.
cheers,
flxo
sorry for the short description, but it's Friday 9pm and I really shouldn't sit in front of my computer...
Click to expand...
Click to collapse
I'll try this out. Oh and if this works, I'll see if I can start porting any roms to this device now
---------- Post added at 11:28 AM ---------- Previous post was at 10:50 AM ----------
Yo, I made a flashable odin.tar! Enjoy testing guys, cheers
http://rapidshare.com/files/2716144166/recovery.tar.md5
I keep my fingers crossed for it.
It will open new world for our phone.
Wysyłane z mojego Nexus 7 za pomocą Tapatalk 2
TheBoegl said:
BTW: no one should just follow me by doing a reboot recovery, though I have created an odin-flashable restore for getting out of the "boot to recovery" loop without loosing data.
Click to expand...
Click to collapse
Thanks. That fix is exactly what I need right now...
Everyone be carefull - this image is absolutely untested and may brick your device....
Lum_Os said:
I'll try this out. Oh and if this works, I'll see if I can start porting any roms to this device now
---------- Post added at 11:28 AM ---------- Previous post was at 10:50 AM ----------
Yo, I made a flashable odin.tar! Enjoy testing guys, cheers
http://rapidshare.com/files/2716144166/recovery.tar.md5
Click to expand...
Click to collapse
Has anyone tried
kolmanb said:
Has anyone tried
Click to expand...
Click to collapse
Tried flashing, works like a charm. Just hold volume up, home and power, let go of power when you feel vibration and keep hold volume up and home button and you're in cwm! Gonna try port first custom rom, cm10 from s2 and see if it truly works
Hello,
I have just tested : very good ! very good !
Thanks a lot.
:laugh:
Works perfectly super !:laugh::good:
backup: ok
restore: ok
Apology : restore works fine
install zip : from sd card; ext.sd card ok
kolmanb said:
Apology : restore works fine
install zip : from sd card; ext.sd card ok
Click to expand...
Click to collapse
Thanks!
I changed the recovery.fstab to mount the external SD on /sdcard. Storing backups on the real SD is IMHO more convenient.
The updated image is: 20130606_recovery.img
Thanks to TheBoegl for the hint.
flxo said:
I changed the recovery.fstab to mount the external SD on /sdcard. Storing backups on the real SD is IMHO more convenient.
Click to expand...
Click to collapse
Thats great. For everyone who want to flash this with odin try this image - it is the packed version of @flxo.
I have reupped the previous recoveries because they were unflashable with odin.
I really apologize for that mistake my Finnish, Slovenian and Bulgarian members if Odin is stuck, just unplug your phone and select the new image, plug it in again and flash.
This double post is to inform the few of you who have downloaded the file already.
I created an Odin flashable .tar.md5 of the 20130606_1_ version. I tried it myself, works fine.
One nitpicky question: flxo, shouldn't it be 20130706? It's July after all
flxo said:
[*]reboot recovery: reboots device normally. failed.
Click to expand...
Click to collapse
20130606_1_ fixed that for me, the device froze for half a minute and then rebooted into recovery.
EDIT:
Bad news: Somehow, the phone exclusively reboots into recovery now. I don't know if it's due to choosing "reboot recovery" or something else...
HeavyMoertel said:
Bad news: Somehow, the phone exclusively reboots into recovery now. I don't know if it's due to choosing "reboot recovery" or something else...
Click to expand...
Click to collapse
I guess you found my fix for that in the second post :good:
TheBoegl said:
I guess you found my fix for that in the second post :good:
Click to expand...
Click to collapse
Yeah, well, I really shouldn't have followed you on that, I guess.
But many thanks for reminding me of your fix. :highfive:
---------- Post added at 12:45 AM ---------- Previous post was at 12:13 AM ----------
Issue: factory reset formats the whole SD card.
I'm so sorry, can you tell me how to install CWM, I tried to Odin MOD but nothing Nest, thank you very much.
you were faster than i thought.
I've added the description and link in the second post.
Let me know if you need more information.
I need to root my S5 to enable a 3rd party SystemUI tuner. I've tried several one-click rooting methods, but none of them seem to work. My device runs Android 6.0.1. I can provide any additional screenshots or specs if needed.
legomg said:
I need to root my S5 to enable a 3rd party SystemUI tuner. I've tried several one-click rooting methods, but none of them seem to work. My device runs Android 6.0.1. I can provide any additional screenshots or specs if needed.
Click to expand...
Click to collapse
Try reading: https://forum.xda-developers.com/tm...l/root-how-to-root-sm-g900t-firmware-t3358190
DickyG said:
Try reading: https://forum.xda-developers.com/tm...l/root-how-to-root-sm-g900t-firmware-t3358190
Click to expand...
Click to collapse
Will this cause me to loose my data?
DickyG said:
Try reading: https://forum.xda-developers.com/tm...l/root-how-to-root-sm-g900t-firmware-t3358190
Click to expand...
Click to collapse
of course I can help. the best way to do it is to install a custom recovery, my favorite one is TWRP. Then you grab your favorite custom rom and flash it from there. I also recommend picking something new but if you enjoy touchwiz there are plenty of nice touchwiz roms out there. Such as smallwiz version 1. do not install version 8 its very laggy and has a ton of bugs. But the best rom out there is resurrection remix rom for the s5. hope I helped !
RomBetaTester said:
of course I can help. the best way to do it is to install a custom recovery, my favorite one is TWRP. Then you grab your favorite custom rom and flash it from there. I also recommend picking something new but if you enjoy touchwiz there are plenty of nice touchwiz roms out there. Such as smallwiz version 1. do not install version 8 its very laggy and has a ton of bugs. But the best rom out there is resurrection remix rom for the s5. hope I helped !
Click to expand...
Click to collapse
Ok this did help, however i know extremely little about installing custom recoveries. So I need to know:
1. What will I need to do it
2. What are the steps to do it, and...
3. Will installing a custom recovery wipe my storage?
I'm sorry if I'm being irritating, but I'm only just about to start computer science as a freshman.
legomg said:
Ok this did help, however i know extremely little about installing custom recoveries. So I need to know:
1. What will I need to do it
2. What are the steps to do it, and...
3. Will installing a custom recovery wipe my storage?
I'm sorry if I'm being irritating, but I'm only just about to start computer science as a freshman.
Click to expand...
Click to collapse
I am sorry for the late reply my power was out due to a storm, Firs you need to install Odin, then you need to download TWRP, I recommend TWRP version 2.8.7.0 its faster even though the graphics look pretty bad. Next flash TWRP using AP on Odin, (Phone needs to be in download mode). On the Samsung devices TWRP wont install unless you do it twice so flash TWRP twice but the second time you flash unlick reboot on the options in odin. Once flashed a second time reboot into recovery, congratulations you have a custom firmware, now download your custom rom of choice I recommend small wiz its a debloated version of touchwiz, download it on your computer and then transfer it over to your phone on the download section after that you're going to want to wipe your wipe your phone. Wipe everthing except internal storage and sd card. next go to install on TWRP then navigate to the download folder click on Small wiz or whatever custom rom you have and then flash it. then once its done reboot and you're done. this will take a while to boot on the first time. its compressing a ram disk and installing a new kernel. dont be scared.
I am having issues rooting my device. I am running 6.0.1 marshmallow and with the march 1st, 2017 security patch. I am using a mac and am able to get odin v 1.85 running on my computer using wine bottler but for some reason when I connect it odin doesn't pick it up. I have reinstalled the drivers and it's still doesn't work. It works fine using Kies. I am not sure what I am doing wrong. Any help would be greatly appreciated or point me to the right thread thanks.
RomBetaTester said:
I am sorry for the late reply my power was out due to a storm, Firs you need to install Odin, then you need to download TWRP, I recommend TWRP version 2.8.7.0 its faster even though the graphics look pretty bad. Next flash TWRP using AP on Odin, (Phone needs to be in download mode). On the Samsung devices TWRP wont install unless you do it twice so flash TWRP twice but the second time you flash unlick reboot on the options in odin. Once flashed a second time reboot into recovery, congratulations you have a custom firmware, now download your custom rom of choice I recommend small wiz its a debloated version of touchwiz, download it on your computer and then transfer it over to your phone on the download section after that you're going to want to wipe your wipe your phone. Wipe everthing except internal storage and sd card. next go to install on TWRP then navigate to the download folder click on Small wiz or whatever custom rom you have and then flash it. then once its done reboot and you're done. this will take a while to boot on the first time. its compressing a ram disk and installing a new kernel. dont be scared.
Click to expand...
Click to collapse
I cannot install Odin on my computer, because my only computer is a Mac. My only method of installing TWRP without a computer was on my Galaxy Tab, which was already rooted, and I used Flashify to flash it. Since my S5 has no root, I can't flash TWRP with Flashify.
legomg said:
I need to root my S5 to enable a 3rd party SystemUI tuner. I've tried several one-click rooting methods, but none of them seem to work. My device runs Android 6.0.1. I can provide any additional screenshots or specs if needed.
Click to expand...
Click to collapse
Does your S5 run a stock room?
---------- Post added at 03:19 AM ---------- Previous post was at 03:16 AM ----------
If you have a computer watch this video. It allows you to root your S5 through Odin.
---------- Post added at 03:20 AM ---------- Previous post was at 03:19 AM ----------
RomBetaTester said:
Does your S5 run a stock room?
---------- Post added at 03:19 AM ---------- Previous post was at 03:16 AM ----------
If you have a computer watch this video. It allows you to root your S5 through Odin.
Click to expand...
Click to collapse
https://youtu.be/uPcEeMhlR_8
RomBetaTester said:
Does your S5 run a stock room?
---------- Post added at 03:19 AM ---------- Previous post was at 03:16 AM ----------
If you have a computer watch this video. It allows you to root your S5 through Odin.
---------- Post added at 03:20 AM ---------- Previous post was at 03:19 AM ----------
Click to expand...
Click to collapse
Yes. My S5 is running the factory ROM I bought it with.
I resolved the issue. I flashed TWRP using my school laptop and installed Lineage 14.1. I got root by flashing a file to enable it in settings.
I have to say, Lineage is a LOT faster than the stock ROM, and it looks a lot cleaner too. Thanks for the help guys
with very little activity lately for the LGV20, specifically the H918 T-Mobile variant, I created a TWRP flashable package for the recent H91810q release. this zip flash every partition included in the latest KDZ package with the exception of recovery to keep TWRP. standard disclaimer applies, you do all of this at YOUR OWN risk! because 10q is not rootable, you need to be root'd before flashing this! failure to do so will probably cause you to lose root and/or lose TWRP! and worst of all, because 10q can't be downgraded to 10j (last version where you can still obtain root via dirtycow) because of Anti-RollBack, you're fscked!
NOTE1: you can find the partitions that will be flashed in the updater-script. to be extra cautious you can back up all of the partitions that will be overwritten with the following: dd if=/dev/block/bootdevice/by-name/{partition} of=/external_sd/backup/{partition}.img.
NOTE2: boot partition has been modified only to remove rctd, nothing else so I consider this to still be stock
Instructions:
download H91810u.zip file listed below and put on microSD card
download your choice of root and put on microSD card, choose from either Magisk or SuperSU *Note: v12.0 of Magisk does not work with the LGV20 device in general and v14.0 is recommended.
backup any data from internal "SD card"
boot into TWRP (requires TWRP recovery to already be installed)
create a TWRP backup of the device
flash zip from microSD card by using "Install"
FLASH YOUR CHOICE OF ROOT - Flashing root is VERY IMPORTANT BEFORE REBOOTING!
reboot
profit!
Download:
H91810q.zip
old 10q md5sum: 8c2e76ded9759a63b1ffac86f3941649
new 10q md5sum: c7d4086b3a0a786d1501ef7e4ce22f32 - re-zipped in Linux for proper alignment
H91810r.zip
wrong 10r md5sum: 9e2e1f8c56079d7bf629ce5e375d7551 (this is actually the md5sum for the KDZ)
correct 10r md5sum: 194b2bc41aa6dbdd7b9a371392f7b930
H91810s.zip
10s md5sum: f187fdefe4c3612c5811e9fbeb0748c5
H91810t.zip - rctd and triton both disabled, previous versions only removed rctd
10t md5sum: b00c2f644b15eb15e459c48830caa5da
H91810u.zip - rctd and triton both disabled, previous versions only removed rctd
10u md5sum: f51b2b11a30dc448b0da0edc750bb587
Flashing Process (what flashing this zip does):
flash necessary partition images with the exception of recovery (to keep TWRP) from the KDZ
rename /system/recovery-from-boot.p to /system/recovery-from-boot.bak to prevent stock recovery from being installed on boot
wipes dalvik-cache and cache
BIG thanks to @McNutnut on guidance, as well as his script to put all of this together!
also thanks to @bullghost for the KDZ extractor (https://forum.xda-developers.com/showthread.php?t=2600575)
@Tilde88 for the original updater-script template w/root (https://forum.xda-developers.com/v20/development/us996-nrd90m-modded-notsostock-rom-v5-1-t3526542)
Awesome thanks.. I'm on it!
---------- Post added at 12:50 AM ---------- Previous post was at 12:07 AM ----------
Didn't work... Still shows 10p. I noticed the flash process was rather fast also.
storm68 said:
Awesome thanks.. I'm on it!
---------- Post added at 12:50 AM ---------- Previous post was at 12:07 AM ----------
Didn't work... Still shows 10p. I noticed the flash process was rather fast also.
Click to expand...
Click to collapse
Dude, thanks for whipping this out so fast! (TWSS) I will get right on making a debloated rom from this. Is it ARB 1?
So I HAVE to flash root? Sometimes I don't flash root because of my gear S3 watch.
I just flashed but still showing 10p. But the kernel info shows Sept 12. So the kernel is updated but wondering on why it still shows 10p on software info @ about phone.
storm68 said:
Awesome thanks.. I'm on it!
---------- Post added at 12:50 AM ---------- Previous post was at 12:07 AM ----------
Didn't work... Still shows 10p. I noticed the flash process was rather fast also.
Click to expand...
Click to collapse
hold on, let me re-zip and re-upload. I had used two different methods to add the files to the archive so I'm going to re-do it all with one method
texasaggie1 said:
Dude, thanks for whipping this out so fast! (TWSS) I will get right on making a debloated rom from this. Is it ARB 1?
So I HAVE to flash root? Sometimes I don't flash root because of my gear S3 watch.
Click to expand...
Click to collapse
yes, this is ARB1 and yes, root is needed if you want to stay root'd
As you can see the updater script shows install 10p.
storm68 said:
As you can see the updater script shows install 10p.
Click to expand...
Click to collapse
yep, for some reason using Windows to create zip files causes inconsistencies. I've zipped up everything in Linux this time and double checked the updater script to make sure everything is good to go and am uploading it as I type... I've already updated the OP with the new md5sum and the link should remain the same. I'll give a heads up once it's live
Ok thanks for your time. Appreciate it. ?
storm68 said:
Ok thanks for your time. Appreciate it.
Click to expand...
Click to collapse
done! uploaded and downloaded myself to verify everything is the correct one. this should bring you to 10q for everything... sorry for the troubles of flashing again. don't forget to flash root just in case lol
No problem. No apology needed being you really don't have to do this for the community. Thanks again.
Sorry if I'm asking an obvious question but when did t mobile release a new update? I thought the latest version was 10p???
Flashed... All good!
---------- Post added at 02:41 AM ---------- Previous post was at 02:40 AM ----------
Still_living714 said:
Sorry if I'm asking an obvious question but when did t mobile release a new update? I thought the latest version was 10p???
Click to expand...
Click to collapse
Mine came yesterday. Updater to 10q. If you haven't gotten it yet you will..
storm68 said:
Flashed... All good!
---------- Post added at 02:41 AM ---------- Previous post was at 02:40 AM ----------
Mine came yesterday. Updater to 10q. If you haven't gotten it yet you will..
Click to expand...
Click to collapse
Any big improvements that you can see?
i flashed and once i unlocked my phone, it kept saying process.android keeps stopping repeatedly. booted back into twrp to restore the backup i made in twrp and now the keeps rebooting to the lg screen. Can anybdoy help me out please. i was ww kernel and 10k
Still_living714 said:
Any big improvements that you can see?
Click to expand...
Click to collapse
I would have to wait and see. But first hand it's about the same as 10p no rctd.
---------- Post added at 04:02 AM ---------- Previous post was at 03:26 AM ----------
Lgv20user said:
i flashed and once i unlocked my phone, it kept saying process.android keeps stopping repeatedly. booted back into twrp to restore the backup i made in twrp and now the keeps rebooting to the lg screen. Can anybdoy help me out please. i was ww kernel and 10k
Click to expand...
Click to collapse
First of be advised that this is anti roll back. Once on it you can't go backwards to other older roms. In reference to your problem you'll have to do a battery pull. Put battery back in. Now hold down volume down and power button at the same time, when you see LG screen release power button for two seconds then push again holding down power. During all this never release volume down. Now you'll get a reset screen with yes and no option. Use volume key to choose yes, twice..... This will get you back to TWRP. In your case I wouldn't even bother with back up but you can try again if want. What I would do is flash something else that I know works. Then decide from there what to do... Maybe redownload again. May be corrupt some how. I assume your on h918. Hope so! Good luck.
storm68 said:
I would have to wait and see. But first hand it's about the same as 10p no rctd.
---------- Post added at 04:02 AM ---------- Previous post was at 03:26 AM ----------
First of be advised that this is anti roll back. Once on it you can't go backwards to other older roms. In reference to your problem you'll have to do a battery pull. Put battery back in. Now hold down volume down and power button at the same time, when you see LG screen release power button for two seconds then push again holding down power. During all this never release volume down. Now you'll get a reset screen with yes and no option. Use volume key to choose yes, twice..... This will get you back to TWRP. In your case I wouldn't even bother with back up but you can try again if want. What I would do is flash something else that I know works. Then decide from there what to do... Maybe redownload again. May be corrupt some how. I assume your on h918. Hope so! Good luck.
Click to expand...
Click to collapse
what do you recommend i flash
Lgv20user said:
what do you recommend i flash
Click to expand...
Click to collapse
Well we really don't know if your system went to 10q now, so........ You can try again. On both, the backup or 10q. Since you know now how to get to TWRP with battery pull you can try both, see what works. Try backup first. If it doesn't work you may have system in 10q now being you backed up a 10k system may not work now. If it doesn't try q again. If that doesn't work then download 10p or redownload 10q and side load on TWRP from computer. Then flash again. These are steps I would do.. if someone tells you different then it's your choice. Different ways for different things.
storm68 said:
Well we really don't know if your system went to 10q now, so........ You can try again. On both, the backup or 10q. Since you know now how to get to TWRP with battery pull you can try both, see what works. Try backup first. If it doesn't work you may have system in 10q now being you backed up a 10k system may not work now. If it doesn't try q again. If that doesn't work then download 10p or redownload 10q and side load on TWRP from computer. Then flash again. These are steps I would do.. if someone tells you different then it's your choice. Different ways for different things.
Click to expand...
Click to collapse
so 10q is showing up. i am having issues with the modem i believe because i dont get tmobile recepetion and as soon as i put into airplane mode, the error message stops.
I haven't tried the 10p weta kernel yet but it may not work being this stock kernel on 10q is updated to the September security patch. May try later today.
First off, thanks for keeping my beloved H918 alive!. Thought all future dev for the V20 was dead.
Now a question. Any timeframe on a debloated version? Not in a hurry mind you, just curious.