Hey all,
I have unlocked my bootloader all went fine, then I flashed TWRP recovery but if I try to adb boot into recovery I get a screen with a little green android guy saying no command and if I do it manually I get the very same screen, what should I do? Should I try CWM or is this a bug I can fix?
Thanks k.. :good:
Please I am really stuck, I have tried flashing TRP a few times and even CWM to get root but anytime I boot to recovery I just get a green android guy with a red triangle coming out with a ! mark and under it saying No Command Please please help me out I have been reading and searching and cant get my moto e to boot into TWRP or CWM my bootl;oader is unlocked. All I am asking for is why am I getting this screen with the no command and what can I do to get into recovery so I can root my phone and flash a ROM.
:EDIT:
This is the Pic that comes up when I reboot into recovery only under the android guy it says no command
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please someone, anyone help me i am really stuck on this and cant find a way out
RiceydDr0id said:
Please I am really stuck, I have tried flashing TRP a few times and even CWM to get root but anytime I boot to recovery I just get a green android guy with a red triangle coming out with a ! mark and under it saying No Command Please please help me out I have been reading and searching and cant get my moto e to boot into TWRP or CWM my bootl;oader is unlocked. All I am asking for is why am I getting this screen with the no command and what can I do to get into recovery so I can root my phone and flash a ROM.
:EDIT:
This is the Pic that comes up when I reboot into recovery only under the android guy it says no command
Please someone, anyone help me i am really stuck on this and cant find a way out
Click to expand...
Click to collapse
I thinl twrp not installed properly try cwm and install twrp over it
K I think I've done that already and keep getting the same screen... What's the latest cwm n twrp? I'll try some other methods of getting cwm on it.. Thank u for our reply I am getting stressed not getting into recovery to get root ughhh
Nope, still no joy getting the same screen... What is going wrong? Iv tried all d different methods on here followed them to a t but still can't boot to recovery. Plz help me out, I'm stressin big time!
after u flashed custom recovery...from fastboot.... don't reboot..... open recovery ..from fastboot(using volume buttons) just after flashing...... .. your custom recovery will be executed and it will stick ...
ps:- the green android screen with triangle..which is opening.....is stock recovery ......follow this method and your custom recovery will work
press thanks if i helped
OK I'll give it a try now, think I've tried that way already, I will flash TWRP again and try what you said.. I'll report back as soon as I've it setup. Thanks will be gave just for taking the time to try help work r not work u are trying to help... Thank u.
P.s How do u thank someone from the XDA App? :-?
Got it thanks gave 2 both ye guys r girls keep the help coming ikts appreciated!! I'll try flash now )
Lads I'm still getting no joy here :-/ iv used rookjunkies .bat super tool iv used other methods, nothing has worked. What am I doing wrong!?!?
RiceydDr0id said:
Lads I'm still getting no joy here :-/ iv used rookjunkies .bat super tool iv used other methods, nothing has worked. What am I doing wrong!?!?
Click to expand...
Click to collapse
have u done what i have told u to do ?
please explain your flashing process...
after flashing using fastboot DONT reboot..... go to recovery immediately
RiceydDr0id said:
Lads I'm still getting no joy here :-/ iv used rookjunkies .bat super tool iv used other methods, nothing has worked. What am I doing wrong!?!?
Click to expand...
Click to collapse
That's usually seen when you reboot to the Recovery menu. When you see that screen, press and hold Power, then press the Vol Up button at the same time. If you see the Recovery menu appear (it's in a small system font), use the volume buttons to highlight "reboot system now," and press Power to execute.
Failed to reboot into recovery mode from bootloader after flashing custom recovery
dchatterjee172 said:
after u flashed custom recovery...from fastboot.... don't reboot..... open recovery ..from fastboot(using volume buttons) just after flashing...... .. your custom recovery will be executed and it will stick ...
ps:- the green android screen with triangle..which is opening.....is stock recovery ......follow this method and your custom recovery will work
press thanks if i helped
Click to expand...
Click to collapse
Hi,
I tried your solution but unfortunately it's not working on my side.
I followed below steps,
1. Booted into fastboot mode.
2. Flashed custom recovery successfully. (tried both clockwork and twrp).
3. Tried to reboot into recovery mode by selecting option recovery from same screen of fastboot mode. phone flashes the as usual warning(bootloader unlocked) and gets turned off. Waited for 10 minutes but didn't reboot into recovery mode.
4. Pressed the power button and system reboots normally.
5. Again tried to reboot into recovery mode and facing the stock recovery not the custom one.
Any help?
Manish.android said:
Hi,
I tried your solution but unfortunately it's not working on my side.
I followed below steps,
1. Booted into fastboot mode.
2. Flashed custom recovery successfully. (tried both clockwork and twrp).
3. Tried to reboot into recovery mode by selecting option recovery from same screen of fastboot mode. phone flashes the as usual warning(bootloader unlocked) and gets turned off. Waited for 10 minutes but didn't reboot into recovery mode.
4. Pressed the power button and system reboots normally.
5. Again tried to reboot into recovery mode and facing the stock recovery not the custom one.
Any help?
Click to expand...
Click to collapse
I was also struggling a lot into getting twrp and cw loaded on to a Moto E. The problem was that I was pressing the Power button to activate the recovery menu and that will not activate the recovery option. You got to press the UP button instead of power. This is quite counter intuitive but described well in most posts, but as experts we assume up button is to go up the menu.
Sunish Issac
Related
i have a rooted at&t lg e970. i wanted to unlock the bootloader and install recovery on it. so i downloaded freegee,followed all the steps and twrp was installed on my phone. but when i decided to take a back up of my phone,it got switched off and now it wont boot . vol.up + power also takes a ridiculously long time to boot and doesn't work everytime. when vol.up+power does work, i get a recovery screen with power off,recovery,restart bootloader as options. but whichever option i select,i get a google screen and the phone shuts down. any help in this regard would me much appreciated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i'm getting this message when i try to restore my phone using lgnpst.
i'm getting this message when i try to restore my phone using lgnpst.
can someone help me with this? phone doesn't boot at 67% or 85%. an gives the above error. any help would be greatly appreciated.
Volstagg.The.Valiant said:
can someone help me with this? phone doesn't boot at 67% or 85%. an gives the above error. any help would be greatly appreciated.
Click to expand...
Click to collapse
Does it do anything, like make it to the Rethink Possible screen and then hang?
Volstagg.The.Valiant said:
can someone help me with this? phone doesn't boot at 67% or 85%. an gives the above error. any help would be greatly appreciated.
Click to expand...
Click to collapse
If you look at the read me file it states that 67% and/or 85% means it's complete. Disconnect your phone and reboot. If it gets stuck after the LG splash, then you need to factory reset/wipe data. Hold the pwr button down for 12-15 seconds to make sure the phone powered off. Then press the vol down + pwr to get into the stock factory reset menu.
Sent from my Optimus G using xda app-developers app
adfurgerson said:
Does it do anything, like make it to the Rethink Possible screen and then hang?
Click to expand...
Click to collapse
no at 67% phone tries to reboot and LG start screen appears and then it goes into a loop
mikeylikey said:
If you look at the read me file it states that 67% and/or 85% means it's complete. Disconnect your phone and reboot. If it gets stuck after the LG splash, then you need to factory reset/wipe data. Hold the pwr button down for 12-15 seconds to make sure the phone powered off. Then press the vol down + pwr to get into the stock factory reset menu.
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
i'm getting the factory reset menu and even after confirming the reset phone doesn't boot up
Which freegee did you use, the PC program or the play store app? You may want to try the teenbin alt. with lgnpst, you will need a ROM copied to your SD card to flash from recovery after running teenybin.
adfurgerson said:
Which freegee did you use, the PC program or the play store app? You may want to try the teenbin alt. with lgnpst, you will need a ROM copied to your SD card to flash from recovery after running teenybin.
Click to expand...
Click to collapse
i used the freegee play store app. i shall try the lg dll file with teenybin alt with a ROM in my SD card for flash. problem is even teenybin doesn't seem to work. anyways i shall try this today when i get back from work and shall report on the progress. thanks for helping.
so i tried to flash teenybin to try and install recovery. but at 67% phone tries to reboot but is not rebooting. and then i get a msg saying that the connection to the phone has been lost. tried the same with teeny altbin also. getting the same response.
can someone explain what i'm doing wrong?
so i tried to flash teenybin to try and install recovery. but at 67% phone tries to reboot but is not rebooting. and then i get a msg saying that the connection to the phone has been lost. tried the same with teeny altbin also. getting the same response.
can someone explain what i'm doing wrong?
Sounds like you're bricked.
Sent from my LG Optimus G using XDA Premium 4 mobile app
DeathmonkeyGTX said:
Sounds like you're bricked.
Sent from my LG Optimus G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
any solutions to un-brick my phone?
Volstagg.The.Valiant said:
so i tried to flash teenybin to try and install recovery. but at 67% phone tries to reboot but is not rebooting. and then i get a msg saying that the connection to the phone has been lost. tried the same with teeny altbin also. getting the same response.
can someone explain what i'm doing wrong?
Click to expand...
Click to collapse
This is where you you should boot into recovery to flash ROM. Volume up plus power to get to fastboot, with alt you should be able to see recovery menu. If not it will be volume down twice then power.
quick update: installed teenybin successfully and got into recovery mode. but in recovery mode, if i select recovery option and press power button, the google logo flashes and the phone turns off. suggestions?
I'm having the same problems. These teenybins are broken. One stalls at the LG logo after rebooting at 67% with a disconnect, bricks with no bootloader/fastboot. The alternate reboots at 67% and stalls at 85% as well with a Google logo that I've never had before, and then my rom crashes everything I open constantly, e.g. not even able to bring up a keyboard. Both have killed my ADB/fastboot completely.
fierogt42 said:
I'm having the same problems. These teenybins are broken. One stalls at the LG logo after rebooting at 67% with a disconnect, bricks with no bootloader/fastboot. The alternate reboots at 67% and stalls at 85% as well with a Google logo that I've never had before, and then my rom crashes everything I open constantly, e.g. not even able to bring up a keyboard. Both have killed my ADB/fastboot completely.
Click to expand...
Click to collapse
Stalls ? That's what's suppose to happen. The Google logo is normal, I have that too. Your ROM crash ? Flash another one in recovery. Teenybins fixed my phone, I don't think they are broke
---------- Post added at 03:48 PM ---------- Previous post was at 03:43 PM ----------
Volstagg.The.Valiant said:
quick update: installed teenybin successfully and got into recovery mode. but in recovery mode, if i select recovery option and press power button, the google logo flashes and the phone turns off. suggestions?
Click to expand...
Click to collapse
You still have fastboot and are able to enter download mode so I think your fine. If no recovery, try to do the bin again after reading the instruction thoroughly. The bins work, it fixed my phone. You may have messed it up somewhere
Maybe I should be more specific. My previous rom that worked perfectly crashed constantly after the teenybin. One teenybin locks me out of everything but download mode, including recovery, and both teenybins also have made my ADB & fastboot stop working completely. Tell me that's normal too.
fierogt42 said:
Maybe I should be more specific. My previous rom that worked perfectly crashed constantly after the teenybin. One teenybin locks me out of everything but download mode, including recovery, and both teenybins also have made my ADB & fastboot stop working completely. Tell me that's normal too.
Click to expand...
Click to collapse
What's normal is I only tried to help and you continue with your attitude you will just have to help yourself
As this time-lapsed gif indicates, my phone is stuck in an endless boot logo - recovery loop.
I was on official Sammy 4.3 and decided to reboot to recovery when I encountered this. The recovery at that time was Philz 5.18.5 and I was incidentally rebooting to recovery to flash Philz 6.
The following has no effect:
1. Long press of power button (8 secs) for shutdown and reboot
2. Key combination for reboot to recovery
3. Pulling out the battery and then booting up the phone
4. Connecting the charger with the phone in off mode
I have been able to go in to Download mode which I suppose will enable me to use Odin, but I quite some time away from being able to do that. So any ideas anyone?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sounds like a partition is corrupt, if it won't boot to recovery then nothing else to try except odin.
Sent from my GT-I9300 using Tapatalk
t3chg33k said:
As this time-lapsed gif indicates, my phone is stuck in an endless boot logo - recovery loop.
I was on official Sammy 4.3 and decided to reboot to recovery when I encountered this. The recovery at that time was Philz 5.18.5 and I was incidentally rebooting to recovery to flash Philz 6.
The following has no effect:
1. Long press of power button (8 secs) for shutdown and reboot
2. Key combination for reboot to recovery
3. Pulling out the battery and then booting up the phone
4. Connecting the charger with the phone in off mode
I have been able to go in to Download mode which I suppose will enable me to use Odin, but I quite some time away from being able to do that. So any ideas anyone?
Click to expand...
Click to collapse
Maybe this is SDS, its time to send your SGS3 to Samsung for repair(getting new motherboard)..
Can u go into download mode or not(i did't understood what you said earlier), if you can go into download mode can you please tell what is there in Product Name. if its GT-I9300 and everything else is fine there than try to flash firmware from odin..
suyash1629 said:
Maybe this is SDS, its time to send your SGS3 to Samsung for repair(getting new motherboard)..
Can u go into download mode or not(i did't understood what you said earlier), if you can go into download mode can you please tell what is there in Product Name. if its GT-I9300 and everything else is fine there than try to flash firmware from odin..
Click to expand...
Click to collapse
From what I had read about SDS, the phone ends up being so very dead that it doesn't even show the boot logo. In my case, Download mode is the just about the only thing that I can currently enter in to; so I guess there is no other option now.
t3chg33k said:
From what I had read about SDS, the phone ends up being so very dead that it doesn't even show the boot logo. In my case, Download mode is the just about the only thing that I can currently enter in to; so I guess there is no other option now.
Click to expand...
Click to collapse
In case of SDS boot loop also occurs some times and also some users are able to get into download mode but they find that the product name is blank or something else, have you checked your Product Name, that should be GT-I9300..
i just had the very same problem, although with philz 6.0....
Fortunately in my case (and i can bet in yours too) in download mode the phone model was correctly reported as gt i9300 so it wasn't sds (phew) and i could get my phone running again.
these are the steps i followed:
1) put the phone in download mode
2) open odin and connect the phone to the pc
3) load under pda stock rom of my country
4) let odin do it's magic till it says "pass"
5) at this stage my phone got stuck at the samsuing logo so
6) Turned the phone off and boot in to stock recovery
7) Cleared cache and data/factory reset
8) tada phone up and running again
9) Flashed custom recovery and custom rom again (we will never learn, will we???)
Hope this helped.
amigaoneit said:
i just had the very same problem, although with philz 6.0....
Fortunately in my case (and i can bet in yours too) in download mode the phone model was correctly reported as gt i9300 so it wasn't sds (phew) and i could get my phone running again.
these are the steps i followed:
1) put the phone in download mode
2) open odin and connect the phone to the pc
3) load under pda stock rom of my country
4) let odin do it's magic till it says "pass"
5) at this stage my phone got stuck at the samsuing logo so
6) Turned the phone off and boot in to stock recovery
7) Cleared cache and data/factory reset
8) tada phone up and running again
9) Flashed custom recovery and custom rom again (we will never learn, will we???)
Hope this helped.
Click to expand...
Click to collapse
Yeah, Odin saved the day. A simple flash got the phone going again without the problems that you had with the phone getting stuck at the boot logo. But yeah, we never learn; immediately flashed Philz 6 and Temasek's CM11.
Please help me
Hope your phone can boot into fastboot mode.
Download and Flash the TeamSpain 15S recovery from here
Boot into fastboot mode. Turn the Phone off -> Power on using (Power button + Volume down). Connect to your PC and make sure Fastboot drivers are installed.
Pass this command fastboot flash recovery TWRP5.8TeaMSpaiNRevolution_15s.img assuming the recovery img file and fastboot are in the same directory.
Boot into recovery by pressing (Power + Volume Up) button combo. If you get Blue Led of Death, keep Power + Volume Up buttons pressed till phone boots into recovery.
Download TeamSpain Revolution 15s EUI ROM from here
In TWRP, Adb sideload the above rom.
Thank you I will try
Thank you I will try. please help me.
Can you tell me any detail.
Can you tell me any detail.
jakkapongjames said:
Can you tell me any detail.
Click to expand...
Click to collapse
What detail?
I change rom from model china x820 to indian x821. I try install TWRP but my devices just booted to a black screen with the blue led. I can try many method but doesn't work. it's show only quadcomm driver. what should i do?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi my le max 821 is also soft bricked can any one help please? It is going to fast boot mode, i have tried installing TWRP. It has shown that twrp has been installed, but when i tried to get into recovery it is showing a flashing blue screen and immediately the entire screen is going dark. Please some one guide me. Thanks in advance.
AJJU1972 said:
Hi my le max 821 is also soft bricked can any one help please? It is going to fast boot mode, i have tried installing TWRP. It has shown that twrp has been installed, but when i tried to get into recovery it is showing a flashing blue screen and immediately the entire screen is going dark. Please some one guide me. Thanks in advance.
Click to expand...
Click to collapse
You need to flash the correct recovery for 15s firmware. It is from TeamSpain.
Follow the instructions from this post. Click here.
sanke1 said:
You need to flash the correct recovery for 15s firmware. It is from TeamSpain.
Follow the instructions from this post. Click here.
Click to expand...
Click to collapse
Thanks Mr. Snake 1, will try this one and let u know the result.thanks again.
AJJU1972 said:
Thanks Mr. Snake 1, will try this one and let u know the result.thanks again.
Hi snake i tried this but no luck. But the good thing happened to me is, that after a long time i am able to get into the recovery. the "twrp" is working fine. I have downloaded the CM13 rom from your 'mega' link and adb sideloaded it, but it is not booting into the system, rather getting into boot loop again. The same blue screen is flashing and going dark, as earlier.
Can you please guide me, what am i doing wrong. I tried formating the system partition also(lost the stock rom also). Waiting for your respond. Thanks.
Click to expand...
Click to collapse
Hi snake i tried this but no luck. But the good thing happened to me is, that after a long time i am able to get into the recovery. the "twrp" is working fine. I have downloaded the CM13 rom from your 'mega' link and adb sideloaded it, but it is not booting into the system, rather getting into boot loop again. The same blue screen is flashing and going dark, as earlier.
Can you please guide me, what am i doing wrong. I tried formating the system partition also(lost the stock rom also). Waiting for your respond. Thanks.
AJJU1972 said:
Hi snake i tried this but no luck. But the good thing happened to me is, that after a long time i am able to get into the recovery. the "twrp" is working fine. I have downloaded the CM13 rom from your 'mega' link and adb sideloaded it, but it is not booting into the system, rather getting into boot loop again. The same blue screen is flashing and going dark, as earlier.
Can you please guide me, what am i doing wrong. I tried formating the system partition also(lost the stock rom also). Waiting for your respond. Thanks.
Click to expand...
Click to collapse
You have flashed 15s recovery and booted into CM ROM which is based on 14s or vice versa.
If you have flashed 15s recovery from TeamSpain, make sure that you flash CM ROM which is based on 15s or 16s only.
sanke1 said:
You have flashed 15s recovery and booted into CM ROM which is based on 14s or vice versa.
If you have flashed 15s recovery from TeamSpain, make sure that you flash CM ROM which is based on 15s or 16s only.
Click to expand...
Click to collapse
Thanks Mr. Snake1 finally i got my mobile working after a long time. Testing weather or not all the features are working. Post again with the results. Thanks a lot for your support.
Leeco le max 2 dead without system ...
good personal afternoon, I'm new here and I need help, I have a le Leeco max 2 and he came into loop after a atualizção for rom cuoco92, there installed TWRP the temspain downloaded the rom also the teamspain 15s and do the procedure by adb sideload and sometimes the protocol fail or lock in 47% already tried in every way to recover the device, tried to at OTG more this TWRP does not recognize the OTG cable, can anyone help me give me a light please, I'm the device locked to 1 month ...
A fix for hard brick you can find here http://www.letv.re/topic/1471-unbrick-le-max-2-qfil-rom/
Got the same problem but much worst.
I kind of have the same problem. But its different in its own way. The phone would turn off on its own. And soft brick for maybe 2-3 hours. And then unbrick it self. Meanwhile when u turn it on, you can feel the vibration of the device turn on, but no life on screen. When It does turn of it has the chance to turn on, show the "super powered by ecosystem" and then a blue square would cover the center of the screen. After that ur forced to turn it off again. And turn it back on hoping it won't brick again. When it does turn on normally, there is a chance it would just randomly power off and brick.(even if you are playing a game or browsing the web), I don't know if its hardware problem or software problem. (Btw iam typing this on a note pad so if the phone does brick, I don't have to type again.) It be great if you guys can help me out
Hey guys
I got really annoyed by not being able to delete photos in Google Images, so I decided to root and fix it.
Now, after having my data wiped in the process of opening the bootloader (had to register on LG dev, etc), I am stuck on the last step - I can't get into TWRP to flash supersu.
I flashed it with the fastboot flash recovery command, but then after doing fastboot reboot, and then using adb reboot recovery, I get into the stock recovery.
I found two fixes, none of which work:
1. after flashing TWRP, turn off, then use HW buttons to get into recovery. On the fifth try, I got to the "erase all data" screen, which allegedly should be ignored. So I ignored it, and it erased all my data again
2. use fastboot boot command to boot TWRP directly. Doesn't work, I get an "unknown command" error.
Any other ideas how can I proceed to rooting my V10 (H960A) would be much appreciated.
Are you sure that you are using the command right for flashing the TWRP?? That should be something like: fastboot flash recovery recovery.img
recovery.img --->twrp
Also you get information whether flashing the recovery was successfull or not. Read the output in the coomand window carefully. Maybe you can post a screenshot or at least the returned message.
Here's a screenshot after going through the process again:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
flashing the recovery seems ok. Afterwards it seems vitally important that you switch off your phone, otherwise the recovery will be replaced by the stock revovery. Only after flashing SuperSu TWRP will be persistent.
Quote from the TWRP install instructions:
As on Marshmallow some fastboot commands are not working and LG is restoring recovery on every boot (so you cant use "adb reboot recovery" right now) you need to use one trick.
DO NOT REBOOT YOUR PHONE.
When still in fastboot from step 3 you need to turn off your phone completely. You can do that by holding power button or if that is not working take the battery out.
Now (put the battery in) and press POWER + VOL DOWN buttons. When you see LG logo release the POWER button (while still holding VOL DOWN) and press POWER button again. You should see a screen which is asking you if you want to factory reset your phone. Don't worry - if you made everything correctly it should not wipe your phone.
Use volume and power buttons to choose YES (twice) - and you should see a TWRP screen (after a while)
WARNING: IF YOU REBOOTED YOUR PHONE AFTER FLASHING RECOVERY THIS STEP WILL REALLY ERASE ALL DATA. You need to flash recovery again (step 3)
Click to expand...
Click to collapse
Also you tried to boot with the recovery image which is also not supported by LG.
I suggest you just flash TWRP again and do not try to reboot into recovery via fastboot command. Instead remove the battery right after flashing TWRP, wait a couple of seconds and put it in again. Then boot into recovery using the button combination decribed above.
I followed these steps three times with my phone (after updating the firmware) and it worked fine every time.
I tried it again and now I got through the whole rooting process.
Now I got stuck on the "Your device can't be checked for corruption" screen, which has been showing up on every boot since unlocking bootloader between the two animations, but now it's been there for a few minutes already.
Now what do I do?
****e, looks like I deleted my OS, while trying to wipe stuff in order to get through the boot freeze.
EDIT: I reinstalled stock ROM. Any ideas why it got stuck after rooting?
EDIT2: Installed the wrong ROM (some Tmobile branded version). Are there any custom ROMs for H960A running MM?
Hi,
no there are currently no Custom Roms for the H960A.
BTW: You will also get the "Your device can't be checked for corruption" screen with the correct ROM version. This is just a reminder popping up after bootloader unlock. After a couple of seconds the normal boot sequence will start.
I know, but the software version number now says H90110c
Also it's running 5.1.1. I can handle not having Nougat, but not back to 5.1 again...
I am searching for a way to get back my stock MM ROM, but there are apparently no ZIP or even kdz versions that work on the internet
Any help would be appreciated.
Yes, there are Android 6 kdz files for the H960A available, even in this forum:
http://forum.xda-developers.com/lg-v10/general/kdz-download-lollipop-kdz-10c-lg-servers-t3332348
Make sure you select the correct H960A version as there are two available: Europe and United Arab Emirates.
If the download does not work when you click on a link click it with the right mouse button select "copy link" (or similar, exact text depends on browser). Then open a new browser tab/windows and paste the link in the address field. Now the download should work.
You need to flash the kdz with LGUP.
In your case I would recommend the "REFURBISH" option in LGUP as it makes sure that the phone is completely wiped and reset.
As the refurbish option normally only allows tot-files to be selected you need to use a little trick. The below instructions are quoted from the LGUP thread (http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803). Please look there if you need further information. You don't need to do the changes in the prop-file described at he beginning of the instructions. If you have not installed LGUP yet you'll find it in that thread as well.
TO DO A FULL WIPE AND INSTALL MM - Open the LGUP on your computer.
Select the option "update" (if not already selected).
FILE PATH: point it towards the MM KDZ file.
IMPORTANT!!!!!!! shut down LGUP!
Now open LGUP again - you will notice that the MM KDZ will still be showing in the FILE PATH section. Select REFURBISH and make sure BIN file is ticked. Press Start. Make cup of tea and be patient
Click to expand...
Click to collapse
Unfortunately, the downloads in that forum don't work, even after copy/pasting the link into Chrome, FF, even MSE...
I got two different kdz files from somewhere on the internet:
Europe H960A20a_00_0316
H960A10c_00_1224
None of them work. I got an error during the initialization phase saying the kdz file is incorrect.
Maybe it's because it says H90110c under version (as I said, I managed to install the wrong ROM after wiping everything)?
This is a nightmare. Please help
Device:COL-L29C636 dual Sim 4gb/128gb
Initially the phone was on android 8.1
Unlocked the bootloader and flashed it to android 9 with hurUpdater and twrp.
I noticed the phone was draining battery a lot faster than it was android 8.1.
So I went to twrp and made a factory reset and it stuck on the screen "just a sec " after the wifi connection screen.
So I went into twrp and pressed the button "format data" and I waited for like 10minutes(it says wipe completed but never completed the process to exit twrp)
And then I hold the power button to force a restart.
And now it has no recovery and no OS and no erecovery.
The phone could still boot into fastboot mode.
I tried Huawei multitool but it needs 5 img's which I never had by extracting the update.app
I did flash system.img by fastboot but the phone goes into the screen "unlocked bootloader" warning screen and I knew it was trying to go into recovery because booting into the OS would have additional words below like press the power button to boot normally or hold volume+ to enter erecovery but everytime the phone tries to enter recovery mode that is corrupted.
I think that if I flash the stock recovery and system image it probably would probably end the bootloop.
But extracting the update.app reveals a couple of recovery like recovery_ramdis and recovery_vendor (I think there's 3 of them)
I have no idea how to flash these recoveries.
I tried to flash twrp in fastboot and somehow it never goes into twrp and still stuck on the bootloader unlocked warning screen and I have no idea why flashing twrp successfully but the phone doesn't enter into twrp.
Can anyone shed some light on how to recover my device?
I think I can save my device like this:
Download firmware with firmware finder >Extract update.app and flash the 5 img's in the Huawei multi tool(except the format of the img's that I extracted doesn't look like the ones in the Huawei Multi tool)
Can't enter recovery or erecovery
Fastboot is still usable though.
Unlocked bootloader.
Link to the twrp I used for my device
https://forum.xda-developers.com/honor-10/development/recovery-twrp-3-2-1-0-recovery-view-10-t3798751
I'm stuck here too.... Can we install e recovery with multi tools anyone?
Honor 10 bricked
Hello Guys,
I had exactly the same problem.
I upgraded to EMUI 9 and everything worked fine but I wanted to go back to EMUI 8.1 so I went to TWRP with the intention of doing a factory restoration and downgrade.
I made a Wipe / data, Wipe dalvic / format all data. After this I waited a lot and it didn´t respond.
I had to force the restart and since then the phone no longer works. Same for me, the phone has no recovery and no OS and no erecovery.
I have contacted the people from FunckyHuawei. I have paid 1 credit in order to unbrick the phone but it did not work. They said that; "It would need to be able to reach rescue recovery mode. If it can not reach that, it may be bricked beyond repair. "
Then I contacted another technician, I connected to my computer remotely and he tried to flash all necessary files via fastboot but some of them failed to flash.
He said it looks like there is no TWRP recovery COMPATIBLE for EMUI9 yet.
files attached.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now what to do guys? I will really apreciate any help. The phone has only 3 weeks and I feel so noob now.
Kind Regards,
Gerardo
---------- Post added at 01:05 AM ---------- Previous post was at 12:49 AM ----------
pit777 said:
I'm stuck here too.... Can we install e recovery with multi tools anyone?
Click to expand...
Click to collapse
Sorry Bro, I have already tried that. Even via fastboot and it fails. I think this is happening because EMUI9 needs a compatible twrp which is needed to install the erecovery files.. that´s what I have understood.
Hopefully a compatible TWRP for EMUI9 will be released soon.
yujinloh said:
Device:COL-L29C636 dual Sim 4gb/128gb
Initially the phone was on android 8.1
Unlocked the bootloader and flashed it to android 9 with hurUpdater and twrp.
I noticed the phone was draining battery a lot faster than it was android 8.1.
So I went to twrp and made a factory reset and it stuck on the screen "just a sec " after the wifi connection screen.
So I went into twrp and pressed the button "format data" and I waited for like 10minutes(it says wipe completed but never completed the process to exit twrp)
And then I hold the power button to force a restart.
And now it has no recovery and no OS and no erecovery.
The phone could still boot into fastboot mode.
I tried Huawei multitool but it needs 5 img's which I never had by extracting the update.app
I did flash system.img by fastboot but the phone goes into the screen "unlocked bootloader" warning screen and I knew it was trying to go into recovery because booting into the OS would have additional words below like press the power button to boot normally or hold volume+ to enter erecovery but everytime the phone tries to enter recovery mode that is corrupted.
I think that if I flash the stock recovery and system image it probably would probably end the bootloop.
But extracting the update.app reveals a couple of recovery like recovery_ramdis and recovery_vendor (I think there's 3 of them)
I have no idea how to flash these recoveries.
I tried to flash twrp in fastboot and somehow it never goes into twrp and still stuck on the bootloader unlocked warning screen and I have no idea why flashing twrp successfully but the phone doesn't enter into twrp.
Can anyone shed some light on how to recover my device?
I think I can save my device like this:
Download firmware with firmware finder >Extract update.app and flash the 5 img's in the Huawei multi tool(except the format of the img's that I extracted doesn't look like the ones in the Huawei Multi tool)
Can't enter recovery or erecovery
Fastboot is still usable though.
Unlocked bootloader.
Link to the twrp I used for my device
https://forum.xda-developers.com/ho...covery-twrp-3-2-1-0-recovery-view-10-t3798751
Click to expand...
Click to collapse
Have you tried this:?
https://funkyhuawei.club/unbricking