{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
v500/G Pad 8.3" CYANOGENMOD 12 UNOFFICIAL NIGHTLY BUILDS
DOWNLOAD
(infected server)
(md5sum included with all builds)
KERNEL CODE AND ROM CODE COMPILED WITH LATEST SABERMOD ARM-EABI 4.8.5 (20150301)
SOURCE: https://github.com/infected-lp/android_kernel_lge_v500
- Clang Optimized with -O3 Optimization
- Linker Optimizations
- Graphite Flags
- Other GCC flags to optimize the build
CHANGELOG
http://www.cmxlog.com/12/v500/
(buildbot: intel core i7 [email protected], asus p8z77-v, 24gb corsair vengeance pro 2133mhz cl11, msi gtx 970, 2x samsung 128gb ssd 840 pro raid 0 array, 4x western digital wd3200aaks raid 10 array, samsung f1 1tb, seagate 2tb, silverstone olympia 1000w psu, antec 1200 high-tower)
(wc setup: swiftech apogee xt cpu-block, black-ice gtx-lite 240 radiator, 2x noiseblocker eloop b12-3 1900rpm fans, swiftech mcp355 water-pump, danger den 5.25" reservoir bay)
(Linux Mint 17.1 x64 "Rebecca" 3.18-7.dmz.2-liquorix-amd64)
Disclaimer:
These builds are freshly compiled/synced from CyanogenMod Rom open-source code:
https://github.com/CyanogenMod
Special Thanks
CyanogenMod Dev Team = for the code sources.
Screenshots in attachment.
EXTRA INFO
GAPPS
http://forum.xda-developers.com/lg-...pp-minimal-gapps-gapps-lp-20150107-1-t2997368
All packages contains backup-script, so you dont have to flash gapps, everytime you flash a new build.
Many Thanks to @Deltadroid for making these.
ROOT
http://download.chainfire.eu/supersu
RECOVERY
http://forum.xda-developers.com/lg-g-pad-83/orig-development/recovery-twrp-2-8-2-0-v500-t2968472
First! What an omen. The day i get my Gpad up and running,this pops up.
Edit: Downloaded the 12/6 build will flash it when I get a chance. ?
Edit 2: Running ok , but getting SODs. ?
Have been waiting for you to release this, downloading it now.
Skickat från min LG-V500 via Tapatalk
Is selinux set to enforcing? Any hardware issues? Thanks for this!
atlharp said:
First! What an omen. The day i get my Gpad up and running,this pops up.
Edit: Downloaded the 12/6 build will flash it when I get a chance. ?
Edit 2: Running ok , but getting SODs. ?
Click to expand...
Click to collapse
then its not running ok...
it was my first v500 cm12 alpha build, next builds the bugs will be squashed out..
regards.
I've flashed and running fine. I did a full wipe. System, data and cache. Seems to be running OK. One snag is location seems to latch on on the status bar even though settings is showing off.
Apart from that everything else is good.
Edit: I've had a couple SODs.
Also getting sod's , looking forward to you're next build. =)
Skickat från min LG-V500 via Tapatalk
try new build 20141207 .. no SOD's so far.
edit: no SOD's in 17m uptime, but no access to internal memory now... i think i will wait until tomorrow and build again. theres ton's of commits ready to be merged.
This just made my day, thank you very much
Sent from my iPhone using Tapatalk
The new build seems to be stable, no sod so far and haven't really run in to anything that's doesn't work as it should so far.
Sent from my LG-V500 using Tapatalk
tribemac said:
The new build seems to be stable, no sod so far and haven't really run in to anything that's doesn't work as it should so far.
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
try accessing internal memory.
infected_ said:
try accessing internal memory.
Click to expand...
Click to collapse
Working fine for me with Es file Explorer
Sent from my LG-V500 using Tapatalk
tribemac said:
Working fine for me with Es file Explorer
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
ok... try using dropbox, and open a file.
ROM seems to work totally error-free here, no issues with internal storage (I don't see what you mean, I opened a Dropbox file with no problems just now).
The only thing I don't get is why there is no multiuser support, since I am running CM12 nightlies on my Galaxy S4 and it is fine there...
Am I missing something?
Edit: sorry, didn't see q&a thread. Admin, feel free to delete this post
Sent from my LG-V500 using XDA Free mobile app
infected_ said:
ok... try using dropbox, and open a file.
Click to expand...
Click to collapse
Tried Dropbox to and it works just fine.
Sent from my LG-V500 using Tapatalk
Nemphys said:
ROM seems to work totally error-free here, no issues with internal storage (I don't see what you mean, I opened a Dropbox file with no problems just now).
The only thing I don't get is why there is no multiuser support, since I am running CM12 nightlies on my Galaxy S4 and it is fine there...
Am I missing something?
Click to expand...
Click to collapse
you can open the internal sdcard with CM File Manager, read and write on it, and on Dropbox, you are able to export a file to /downloads (internal memory) ??
which recovery are you using and which fs is the internal memory? vfat?
infected_ said:
you can open the internal sdcard with CM File Manager, read and write on it, and on Dropbox, you are able to export a file to /downloads (internal memory) ??
which recovery are you using and which fs is the internal memory? vfat?
Click to expand...
Click to collapse
Yup, just did all that you proposed with no problem.
I am using Philz latest recovery, no idea what fs is used for internal memory. Qany hints on how to check that?
It might have to do with the "firmware base" I have, which is something I hear about a lot and have no idea what it is, since I installed CM11 on the first day I got the device and just updates the night lies ever since...
---------- Post added at 05:02 PM ---------- Previous post was at 05:02 PM ----------
infected_ said:
you can open the internal sdcard with CM File Manager, read and write on it, and on Dropbox, you are able to export a file to /downloads (internal memory) ??
which recovery are you using and which fs is the internal memory? vfat?
Click to expand...
Click to collapse
Yup, just did all that you proposed with no problem.
I am using Philz latest recovery, no idea what fs is used for internal memory. Qany hints on how to check that?
It might have to do with the "firmware base" I have, which is something I hear about a lot and have no idea what it is, since I installed CM11 on the first day I got the device and just updates the night lies ever since...
Related
Klin's Custom Kernel for YP-G1 USA and INTL
Latest Version: R3
This is a custom kernel that I made based off of STeVE's 3.0 sources. (He gave me permission to release this) I will be adding more features and continue to develop it. The sources are here: https://github.com/klin1344/Galaxy-Player-4.0-Kernel
Please be patient if there are problems as this is my first kernel and everything is still a learning process for me. (I'm completely new to Linux) Enjoy .
Disclamer: I will not be responsible if you brick your device or if any weird stuff happens.
R1 features:
- EXT4 support (See instructions in 2nd post on how to convert to EXT4)
- Insecure kernel (root in ADB)
- All features from STeVE's 3.0 kernel
R2 features:
- Improve touch screen responsiveness
- Custom bootanimation support; the kernel will look in both /data/local/ or /system/media/ for bootanims
- Netarchy/coolbho3ks SoD patch from Entropy512's source (allows you to use screen off profiles of under 800Mhz)
- Lots of tweaks and mods for overall performance and responsiveness
R3 features
- Ported ClockWorkMod 5.2.0.7 from semaphore kernel source for the I9000
- Raised FPS cap to 72
- Raised RAM from 341 MB to 352 MB
--Doing this would break HD video recording and taking photos while taking videos on the I9000, but our device has none of those features, so it shouldn't have any issues.
- More reliable and easier way of converting to EXT4 (see below) (thanks zaclimon for the advice)
How to install:
Check the PDA slot and flash the .tar in ODIN. Or if you're on Linux, extract the zImage from the .tar and flash with Heimdall.
All releases are here: http://www.mediafire.com/?m1bjqojv5ln6o
Thanks to:
- Entropy512 and rumirand for their kernel sources
- STeVE for his custom kernel and source
- Many kernel devs in other SGS and Nexus S forums for their kernel sources as well
- zaclimon for testing initial release and helping me with MD5 mismatch issues
How to convert to EXT4Instructions are for R3 only
1. Flash my kernel.
2. Make sure you have about 14 MB free space on /system.
3. Boot into CWM recovery and do a full nandroid backup.
4. Reboot, and from your computer go to the CWM backup directory on your sd card.
5. Change all the files from ".rfs.tar" to ".ext4.tar".
6. Open nandroid.md5 with a text editor and change all the ".rfs.tar" to ".ext4.tar". Save and close.
7. Eject the device from your computer FIRST. This step is crucial. Then disconnect from your player.
8. Reboot to CWM recovery and do a full restore.
Note: If you're using R5 of my KlassicROM then system is already EXT4.
Thanks to zaclimon for advising me to eject from computer first
If you appreciate my work and want to encourage me to continue developing, don't post "thanks", just click it!
Reserved for future use.
Thanks for your continual development for this player with the custom kernel. Is the CWM the same version from Steve's kernel, or have you put in a newer version?
Regarding your new rom release, I'm always reluctant to change things when they are working well. I hesitated (slightly) going from R3 to R4 and now I'm doing the same thing going to R5.
Quite frankly, R4 works great for me but I'll probably change over to R5 soon enough. LOL Also, if I'm understanding your release notes correctly for R5, I can no longer replace sanim zip with my own boot anim in /system/media, is that correct?
Thanks again, klin.
Mike T
webdroidmt said:
Thanks for your continual development for this player. Funny, I'm always reluctant to change things when they are working well. I hesitated (slightly) going from R3 to R4 and now I'm doing the same thing going to R5.
Quite frankly, R4 works great for me but I'll probably change over to R5 soon enough. LOL Also, if I'm understanding your release notes correctly for R5, I can no longer replace sanim zip with my own boot anim in /system/media, is that correct?
Thanks again, klin.
Mike T
Click to expand...
Click to collapse
Yes bootanimation is no longer supported, but thats an easy fix I will add to this kernel.
Sent using Tapatalk
How long should the device stay at the boot animation after converting the filesystems? Mine has been sitting for more than 5 minutes. I'm on Klassic R5
EDIT: Didn't know R5 was already using EXT4 until I read the note at the top of the page. Change it to a larger font and make it bold so people can read it better.
Screenshot
anyone ??
pentatonicfunk said:
Screenshot
anyone ??
Click to expand...
Click to collapse
It's a KERNEL not a ROM.
There is not screeshot. The kernel is the core of a linux architecture, the one that handle the drivers, the filesystem etc ...
The Rom is the "software" that is around the kernel with all the apps.
See the kernel and the rom as a onion, kernel as the centre and rom as the rest.
What is the benefit of EXT4?
Ext4 file system is much faster than Samsung's proprietary rfs filesystem. It is basically voodoo lagfix, except you have to manually convert instead of it doing it automatically.
Sent using Tapatalk
klin1344 said:
Ext4 file system is much faster than Samsung's proprietary rfs filesystem. It is basically voodoo lagfix, except you have to manually convert instead of it doing it automatically.
Sent using Tapatalk
Click to expand...
Click to collapse
So that makes closer to how others like HTC does it?
caseyatbt said:
So that makes closer to how others like HTC does it?
Click to expand...
Click to collapse
I'm not sure what HTC uses, but the Linux standard us ext4.
Sent using Tapatalk
Updated to r2.
Edit: oh yeah, some suggestions for a kernel name would be nice.
Sent using Tapatalk
Hmm, how about "Klin's kool kernal"
Or "Klin's kustom kernal" might be better?
"Netarchy/coolbho3ks SoD patch from Entropy512's source"
What is that, btw? Nvm about that, just read about it in entropy512's thread.
One more thing: you said somewhere that you had ported a newer version of cwm than what is in Steve's rom, is that in here?
Sent using Tapatalk
iJimaniac said:
Hmm, how about "Klin's kool kernal"
Or "Klin's kustom kernal" might be better?
"Netarchy/coolbho3ks SoD patch from Entropy512's source"
What is that, btw? Nvm about that, just read about it in entropy512's thread.
One more thing: you said somewhere that you had ported a newer version of cwm than what is in Steve's rom, is that in here?
Sent using Tapatalk
Click to expand...
Click to collapse
Thanks for the suggestions.
The CWM had too many problems than it was worth to sort everything out so I'll have to stick to steves cwm implementation for now.
Sent using Tapatalk
Nice!
Can I just flash this over the current kernel? (R1)
I'm on your r5 ROM.
And also, does this version fix the lagging issues in internet browsers and games?
Se7enex said:
Can I just flash this over the current kernel? (R1)
I'm on your r5 ROM.
And also, does this version fix the lagging issues in internet browsers and games?
Click to expand...
Click to collapse
Yes it is compatible with my ROMs. I'm not sure if it fixes the issues because I'm not using Klassic anymore so I can't test it. But I'm using rooted/deodexed stock with this kernel and it is pretty smooth.
Sent using Tapatalk
klin1344 said:
Yes it is compatible with my ROMs. I'm not sure if it fixes the issues because I'm not using Klassic anymore so I can't test it. But I'm using rooted/deodexed stock with this kernel and it is pretty smooth.
Sent using Tapatalk
Click to expand...
Click to collapse
Found a problem. If you are to flash r2 from stock and follow the steps you get suck and the logo. You have to flash r1 follow the steps and then r2.
Edit: On a side note I only see system and cache are the only ones that are converted to ext4. Is that supposed to happen?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey klin, can you post screenshots of the mounts like mine on the post above so I know I'm not alone? The app is Android system info. I feel bad for you cause it seems like i'm annoying you with problems
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 10.1 for the Xperia U
Brought to you by TeamCanjica
TeamCanjica
We've been discussing to officialize the team a while ago and as Pablo (Paul-L) joined us we finally did it.
Our build server was then set up using Jenkins (Pablo's idea) and now and we'll are able to push nightly builds of Cyanogemod to Goo.im easily.
Also we are now joined by Pawel (DevSwift) which is now extending 4.2.2 development to Sony's Xperia devices
.
Diego Porto aka diego-ch -- CyanogenMod
Huang Ji aka cocafe -- CoCore Kernel
Federico Melano aka fedevd -- Miui
Franco Rapeti aka frapeti -- CyanogenMod
Matthew aka CallMeVentus -- NFC Variant
Pablo Lunarenko aka Paul-L -- P.A.C 4.2.2
Shantanu Londhe aka Shaaan -- Paranoid Android 4.2.2
Pawel aka DevSwift -- Xperia U, P, SOLA and GO
Working
RIL
Mobile Data
WiFi
USB tether
GPS
Leds
Audio
SD Card (internal storage)
App2SD
MTP & USB Mass Storage
Sensors
Vibrator
Project Butter
Camera (rear and front) with camcorder
Torch
Youtube HQ
CPU sleep mode
OMX -> Hardware Decoders / Encoders
Ambient Light Sensor
Known Issues
WiFi Tethering and WiFi Direct.
Bluetooth
Source
Check out the ROM Source available on TeamCanjica' s Github.
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Credits
Alin Jerpelea aka FreeXperia
Daniel Hillenbrand aka Codeworkx
Oliver Garcia aka OliverG96
Installation
Download the ROM from the link below
Download gapps on http://goo.im/gapps
Flash kernel via fastboot (kernel from rom zip)
Put the zip files on your SDCard
Reboot on Recovery
Wipe Data / Factory Reset
Select "Install the Zip from External Storage"
Choose CM zip file (don't worry about error)
Choose GApps zip file
Reboot to system
Attention
First boot takes a while.
Wait at least 5 mins for it to boot.
Download
Nightly builds:
http://goo.im/devs/STEAndroid/kumquat/cm-10.1-sony/nightly
Latest build V3:
http://d-h.st/KpC
Want to contribute to development? Drop me a PM or submit your patches via pull request to our GitHub
__________________________________________________________________________________________________
The first full boot of our ROM was at 24/06/2013, current explaination of what works / does not
WiFi Tethering and WiFi Direct:
Wi-Fi Direct will probably NEVER work, we are working on Wi-Fi Tethering, which is probably going to work.
OMX -> Hardware Decoders / Encoders.
ST-Ericsson fault for NOT giving sources, it will NEVER work without them.
Camera
It's just missing symbols, it WILL work
Torch
Needs configuration, it WILL work
Audio
ST-Ericsson NEVER gave the sources, it's KIND of working, BUT is probable it never work at it's FULLEST
Bluetooth
Needs vendor configuration, it WILL work
_______________________________________________________________
Installation things for the paranoic ones:
YOU MUST INSTALL boot.img VIA FASTBOOT/FLASHTOOL IF GIVES YOU ERRORS
So, someone surely will see...set perms failed, this is because we must add a custom edifier/ota tools packager script written in Python 2.x
IF you see the some set_perms failed. IT doesn't mean that the ROM failed to install, just SOME of the files permission weren't applied because mostly THEY DON'T EXIST.
What to do? stay at recovery, go to advanced settings and select "fix permissions". THIS is not required, if you find any problems, just try, it will not do harm to your phone.
_______________________________________________________________
Please discuss NON dev related things at http://forum.xda-developers.com/showthread.php?t=2334423
OTHERWISE, I WILL HAVE TO CALL A MODERATOR HERE, GET A NICE READ OF XDA RULES
Awesome work and thanks.And btw i saw on some other devices (samsung galaxy ace) that omx libraries were adapted from ics, i suppose we could do the same ?, because correct me if im wrong but without omx libraries then bye bye to video recording - hardware video acceleration.
Just installed the ROM. And the rom is, impressively smooth, right after boot. I am unable to make calls, and play audio, etc. But this is some terrific work you guys have done. Every thing is running silky smooth with out a bit of lag. Thank you very much.
vamsi_krishna said:
Just installed the ROM. And the rom is, impressively smooth, right after boot. I am unable to make calls, and play audio, etc. But this is some terrific work you guys have done. Every thing is running silky smooth with out a bit of lag. Thank you very much.
Click to expand...
Click to collapse
We will work out the calls problem like we did on Galaxy S Advance, probably.
If by audio you mean...music? (Apollo crashing) Yes, it's because the sdcard (internal storage) isn't actually mounted/available for system use.
Paul L. said:
We will work out the calls problem like we did on Galaxy S Advance, probably.
If by audio you mean...music? (Apollo crashing) Yes, it's because the sdcard (internal storage) isn't actually mounted/available for system use.
Click to expand...
Click to collapse
It's very interesting because now I can play music and sdcard works we must test it more
Paul L. said:
We will work out the calls problem like we did on Galaxy S Advance, probably.
If by audio you mean...music? (Apollo crashing) Yes, it's because the sdcard (internal storage) isn't actually mounted/available for system use.
Click to expand...
Click to collapse
Yes, apollo crashing problem. Sorry for not being specific. I wish you guys all the best.
Cheers.
hello mates
set_perm: failed to change
status 7 error
may be updater script error
fixxxxxx:cyclops:
I think you should add to all bugs that, at least for now, /sdcard is not working
mirco_pa said:
I think you should add to all bugs that, at least for now, /sdcard is not working
Click to expand...
Click to collapse
Check mnt directory for sdcard,most probably needs to linked.
Sent from my rk30sdk using Tapatalk HD
which one I need to download ?
VocaloidBoy said:
which one I need to download ?
Click to expand...
Click to collapse
Latest
VocaloidBoy said:
which one I need to download ?
Click to expand...
Click to collapse
the latest
@DevSwift1 is there a place where we can read the daily changelog? It would be useful!
TeamCanjica, Hi just wanna help here,
The same problem of missing OMX drivers was there for the Zte Blade, The solution of which is found by developer KonstaT. check out this link:
http://www.modaco.com/topic/359832-devrom145-cyanogenmod-101-android-422/
Glad if i helped!! and Keep up the good work!!
samuelrf said:
take a look to your pm please
Click to expand...
Click to collapse
nothing error,whn copy the META-INF in privious post into
cm-10.1-20130625-NIGHTLY-kumquat and replace..nothing error and no take permission..sory for my bad english
BlueHack said:
i already read and test this method and it won't work :c
Click to expand...
Click to collapse
these rar file ,ok open in rar and extract on desktop,,and zip file of rom open and replace meta info and then achive to zip and copy on ur memorycard and then flash without any permission..sory for my bad english
Paul L. said:
Please discuss NON dev related things at http://forum.xda-developers.com/showthread.php?t=2334423
OTHERWISE, I WILL HAVE TO CALL A MODERATOR HERE, GET A NICE READ OF XDA RULES
Click to expand...
Click to collapse
Please stop spamming this thread and do what OP has kindly told.
Sent from my Xperia U using xda app-developers app
samuelrf said:
it's disabled, it blinks but i don't know why :'(
Click to expand...
Click to collapse
You are on a ENG build, this is force-enabled, you can't disable it
Later we will upload a USERDEBUG build, that should make red lines gone (along with the extra debugging)
nirajkaushik said:
why does the phone hard-brick after rebooting?
I'm even unable to take screenshots and after flashing the rom it says installation aborted, that means some files are not flashed properly...
Click to expand...
Click to collapse
with hard-brick you mean...you're now using it as a doorstop?.
Please people, just DON'T go ahead and flash WITHOUT READING THE FIRST THREE POSTS
No internal storage means...screenshots can't be saved, want to take a screenshot?
You need adb on linux, or adb and ffmpeg on Windows.
adb pull /dev/graphics/fb0 fb0
ffmpeg -vframes 1 -vcodec rawvideo -f rawvideo -pix_fmt rgb32 -s 480x854 -i fb0 -f image2 -vcodec png image.png
sv2hqx said:
i was waiting from a answer from devs or someone who tested
i need bt ....most on the way so i work headset
thanks anyway
Click to expand...
Click to collapse
No, bluetooth doesn't work, yet.
Why? well, we need to FIND the actual bluetooth UART Port, once that's is found (it's somewhere in init the files), we just need to add it in the bluetooth configuration files (they are the same in S Advance), compile, and done
Why I haven't done it yet? I'm repairing my computer (my actual Quad-Core computer, not the slow Single core with 1GB I'm using now). And also, I don't have the device so it needs to be tested by DevSwift first
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All credit goes to the CarbonRom team.
All I do is build, convert and upload this ROM
Try not to report problems from this ROM
It can be caused by the All-F2FS File system.
I changed CarbonRom to boot on an All-F2FS File system.
/system
/cache
/data
I will a make build every night if there was a change that will effect our nexus 7.
FEATURES
All of the ROM's features can be found on there site:
Carbon Features
Here are some screenshots:
Carbon Screenshots
DOWNLOADS
EXT4/F2FS
Gapps
CHANGE LOG
Carbon gerrit
INSTRUCTION
If you need help converting to All-F2FS go here
Downloade ROM and Gapps.
Just do a normal factory reset in Recovery.
Flash ROM and Gapps in Recovery.
then reboot.
If you are updating / dirty flashing
you will need to reflash Gapps
INFO
ROM is built using GCC 4.8
and with @JustArchi's optimizations.
The F2FS ROM will have the M-kernel
built with Linaro 4.9.2 .
F2FS ROM=superSU app is included
Android 4.4.4
EXTRAS
Some times ART wont work on the latest build.
You can try/test out ART and not worry about backing up your ROM.
Just flash this to go back to Dalvik and your golden!
<><><><><><><><><><><><><><><><><><><><><><><><><><>
ONLY ON THE F2FS ROM
Code:
[CENTER][U]List of commands added![/U][/CENTER]
sudo = run a comanned as root once + more Ubuntu like
cc = chear system's caches
CC = chear app's caches
init.d script
disable the M-kernel's DT2W,S2W,SWS features.
but if you want to enable it just use trickster mod
Thanks bro, you're help is appreciated. Themes is working under settings now. Woot! ?
Sent from my Nexus 7 using Tapatalk
OK here is the M-kernel with
The LP core OC to 740
You need to be already on this F2FS ROM or the official M-kernel
To flash this
May be converting my wife's n7 to this. Nice to know I have carbon as an option. Otherwise it wouldn't happen.
Sent from my Nexus 7 using XDA Premium 4 mobile app
justibasa said:
May be converting my wife's n7 to this. Nice to know I have carbon as an option. Otherwise it wouldn't happen.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I know not everyone is into multirom, but it has the most simplest way to convert your system to all-f2fs.....the dev is amazing
Wonderful rom. I just have one problem with it.
I can't add new file into the system partition, it always tell me there is no space left (when there is 15 Mo minimum left). When I wanted to installer Viper4Android I had to hack the ROM installer to add directly into it the file needed for the audio driver.
Is there a way to resolve this issue ? is it linked to the f2fs file system or the way it's mounted ? (of course I remounted it as rw)
Dark_Balor said:
Wonderful rom. I just have one problem with it.
I can't add new file into the system partition, it always tell me there is no space left (when there is 15 Mo minimum left). When I wanted to installer Viper4Android I had to hack the ROM installer to add directly into it the file needed for the audio driver.
Is there a way to resolve this issue ? is it linked to the f2fs file system or the way it's mounted ? (of course I remounted it as rw)
Click to expand...
Click to collapse
15 MB left? On system?
USBhost said:
15 MB left? On system?
Click to expand...
Click to collapse
Yup :
That what the df command is telling me. I think it's quite weird, because if I do a du -s /system I get :
1048576 system
There is something wrong with filesystem for the /system partition because I have no problem for the cache or the data partition that are giving the correct size.
Dark_Balor said:
Yup :
That what the df command is telling me. I think it's quite weird, because if I do a du -s /system I get :
1048576 system
There is something wrong with filesystem for the /system partition because I have no problem for the cache or the data partition that are giving the correct size.
Click to expand...
Click to collapse
try to keep system free
F2FS dose not like system full
maby you should do a clean install
Back
USBhost said:
15 MB left? On system?
Click to expand...
Click to collapse
USBhost said:
try to keep system free
F2FS dose not like system full
maby you should do a clean install
Click to expand...
Click to collapse
Well that's how the FS is after a clean install.
If you check the install script, it does format the system partition before putting any file onto it.
For an unknown reason after the first boot, the partition get filled.
Edit : Okay, I found the reason : Slim_AIO_gapps.
Don't install the full version of the GAPPS, especially G+ and Google Home that are taking 40MB together.
Ok I'm back I will convert it tonight
This gave me the push to go to f2fs and I'm glad I did.
Thanks
Sent from my Nexus 7 using XDA Free mobile app
Dark_Balor said:
Well that's how the FS is after a clean install.
If you check the install script, it does format the system partition before putting any file onto it.
For an unknown reason after the first boot, the partition get filled.
Edit : Okay, I found the reason : Slim_AIO_gapps.
Don't install the full version of the GAPPS, especially G+ and Google Home that are taking 40MB together.
Click to expand...
Click to collapse
OK good you fixed it Cheers
Anyone ever have the Omni feature get stuck where it shows recent apps frozen on screen and then when you try touching the screen it just keeps throwing out the omnibar? Sometimes it will crash and force close but then sometimes I have to reboot.
Sent from my Nexus 7 using Tapatalk
Tried the latest build with latest mkernel experimental but just stops on Carbon logo.
Any ideas?
Sent from my Galaxy Nexus using Tapatalk
d3xp2pc said:
Tried the latest build with latest mkernel experimental but just stops on Carbon logo.
Any ideas?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Did you install the test4
USBhost said:
Did you install the test4
Click to expand...
Click to collapse
Thanks for the quick reply.
Yes I've installed test 4.
Sent from my Galaxy Nexus using Tapatalk
d3xp2pc said:
Thanks for the quick reply.
Yes I've installed test 4.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
It works just fine for me
What process did you use to install it
USBhost said:
It works just fine for me
What process did you use to install it
Click to expand...
Click to collapse
I followed the guide linked in the initial post.
It's possible that I've done something wrong. I'll retry the guide and the install.
Thanks for the help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.
Source Code And Changelog:
My Github //Coming Soon
Features:
Governors:
SmartassV2
badass
Lionheart
Intellidemand
iosched
Qualcomm row
sio
fiops
Other Features:
Motion Gestures
Fast Charge
Pocket Detection
NTFS OTG Support
KSM [needs app, you guys can grap this from Revelation Update 1.0.1 - 1.0.2]
System Rewrite Protection Disabled
Do press Thanks button
Credits:
@flar2
@dominos_liberty [for cherry-picking, compiling and sharing]
XDA:DevDB Information
Liberty Kernels, Kernel for the Sprint HTC EVO 4G LTE
Contributors
bilal_liberty, bilal_liberty
Kernel Special Features:
Version Information
Status: Stable
Created 2014-09-11
Last Updated 2014-09-10
Note:
motion Gesture requires Sense 6 Toolbox or Wake Gestures Xposed module
Mod edit: Removed download link per OP request.
reserved 2
Have you been working with InsertCoin's devs on this in any way? Guess I'm really trying to find out if it's been tested yet.
First working Sense 6 ROM was just released a few hours ago and things this good don't come around very often for the jewel any more! Thanks!
Flashed this, in aroma installer it states its for the one s. Didn't boot for me.
Nice thanks bilal for all your hard work.
Works great for me, with the exception of s2w and similar functions. Curious if gstanke flashed immediately after a clean install before first boot.
remedied
fizbanrapper said:
Works great for me, with the exception of s2w and similar functions. Curious if gstanke flashed immediately after a clean install before first boot.
Click to expand...
Click to collapse
Yes, i also noticed lack of s2w/s2s functionality. Hopefully that will be fixed, as I find that much easier than reaching up to the power button.
But otherwise, seems to be working great so far.
Is SD mounted for everyone using this kernel? Mine is not.
-----------
Currently Posting From: Device 1 (see details in my official signature)
Captain_Throwback said:
Is SD mounted for everyone using this kernel? Mine is not.
-----------
Currently Posting From: Device 1 (see details in my official signature)
Click to expand...
Click to collapse
My sd is mounted in the phone and also accessible on the computer. Maybe size has something to do with it? I'm only using a spare 8G card I had.
Sent from my 831C using XDA Free mobile app
markb629 said:
My sd is mounted in the phone and also accessible on the computer. Maybe size has something to do with it? I'm only using a spare 8G card I had.
Sent from my 831C using XDA Free mobile app
Click to expand...
Click to collapse
Mine is exFAT. I'm almost certain that's the issue.
-----------
Currently Posting From: Device 1 (see details in my official signature)
Captain_Throwback said:
Mine is exFAT. I'm almost certain that's the issue.
-----------
Currently Posting From: Device 1 (see details in my official signature)
Click to expand...
Click to collapse
I'm pretty sure mine is FAT32. That's the standard for the lower capacity cards right? And I've never changed it.
Captain_Throwback said:
Mine is exFAT. I'm almost certain that's the issue.
-----------
Currently Posting From: Device 1 (see details in my official signature)
Click to expand...
Click to collapse
I have a 64g card formatted with exFAT and mine also does not mount with this kernel.
Captain_Throwback said:
Is SD mounted for everyone using this kernel? Mine is not.
-----------
Currently Posting From: Device 1 (see details in my official signature)
Click to expand...
Click to collapse
I was getting an error about apps not being able to mount through the play store, but I unmounted then remounted the sd card and it was fine.
I'm using a 64gb with 4ext
whbisondtr said:
I was getting an error about apps not being able to mount through the play store, but I unmounted then remounted the sd card and it was fine.
I'm using a 64gb with 4ext
Click to expand...
Click to collapse
I don't understand what your last sentence means. What do you mean by "4ext"?
-----------
Currently Posting From: Device 1 (see details in my official signature)
Captain_Throwback said:
I don't understand what your last sentence means. What do you mean by "4ext"?
-----------
Currently Posting From: Device 1 (see details in my official signature)
Click to expand...
Click to collapse
My sd card is formatted in ext4 like with link2sd, using easus partition. Sorry, guess I was thinking of the recovery.
Sent from my jewel using XDA Free mobile app
Captain_Throwback said:
Is SD mounted for everyone using this kernel? Mine is not.
Click to expand...
Click to collapse
Adding my experience to the mix, my 64GB card formatted FAT32 is mounting with this kernel.
I had mistakenly posted this in the InsertCoin Sense ROM thread, but then I remembered that I was using this kernel, so I need to post it here.
A couple hours ago, the phone rebooted itself while it was in my pocket. I grabbed a last-kmsg, if you think it will be helpful. (hopefully I can attach it from my phone, here goes...) hmm. Looks like the app only will attach things from the gallery, not a file manager. I may have to attach it from my computer.
Edit: attachment added from my computer. (File too big, here's the link)
http://logcat.us/view/29440078
RP-88 said:
Adding my experience to the mix, my 64GB card formatted FAT32 is mounting with this kernel.
Click to expand...
Click to collapse
Out of curiosity, why are you using an extra capacity card formatted to FAT32 and not exFAT?
Code:
*** Disclaimer
Don't break your stuff, okay? // TODO write better disclaimer
Introduction
LineageOS 15.1 for Nintendo Switch by switchroot. This is the first publicly available Android ROM for the Nintendo Switch. Based on the Nvidia Shield TV builds it brings a smooth and powerful Android experience to your Switch in both handheld and docked mode.
Click to expand...
Click to collapse
Images
As previously shown:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Features
LineageOS 15.1 - Android 8.1 Oreo
Based on the Nvidia Shield TV trees
TWRP pre-installed
CPU and GPU performance profiles
Works in handheld and docked mode
Audio is supported
Joycons connect via Bluetooth, also in handheld mode
Reboot to Payload (NEW!). Rebooting will reboot to android and reboot to boodloader will boot hekate.
Known bugs:
Deep sleep, so battery life is not great
Auto rotation as we haven't figured out how to talk to the sensor yet
Screen off in dock
Charging is not detected, but console still charges
Some apps don't handle joycon inputs correctly
The touchscreen sometimes detects touches even when your finger is just floating over the screen
There is a system process ANR on boot. Just click „Wait“ and it won’t happen again until next boot
Screenshots do not work
WiFi may randomly stop working. If this happens just reboot
If TV looks odd and grainy when docking then redock a few times.
No TV keyboard that can be used with gamepad
SELinux is disabled
You can’t access the FAT32 partition of the SD card on macOS. Windows and Linux works.
You tell us ;)
Click to expand...
Click to collapse
Installation instructions
Pick the image that corresponds to the size of your SD card. You can use an image that is smaller than your card. You’ll end up with the remaining space unused on your card.
Write the image to your SD card with e.g. balenaEtcher Do not extract the image, Etcher can handle the compressed image just fine! WARNING: This will overwrite any contents on your card! The progress bar/percentage might go haywire in Etcher, but you can ignore that. The flashing will still work and Etcher will let you know when it’s done. It can take up to an hour depending on your SD card’s speed. Also make sure not to format any of the partitions when Windows prompts you to after flashing.
Download GApps for Android 8.1. from OpenGApps, use ARM64 NANO. Put the file on the first partition of your new SD card
If desired download the "Shield-ifier" zip and place it also on the SD card. This will make your Switch identify as Nvidia Shield TV and install the Nvidia app.
Load hekate and boot to TWRP by holding VOL+ when you select the Android config.
Make sure to mount /system and /vendor first in TWRP. Flash GApps zip, reboot2payload zip and optionally flash other zips. Also after installing GApps wipe cache/dalvik as offered by TWRP. Video that shows how to access and flash zips in TWRP: https://youtu.be/3F6WgAb44yk
Reboot to hekate and boot into Android
Complete the inital setup, but DO NOT connect to wifi, do that after set-up has completed. For the Nvidia app to work make sure to update it from Play Store!
Click to expand...
Click to collapse
Changelog
Code:
Initial release: 2019-07-27
Previous changelogs
Code:
// TODO make more releases
Click to expand...
Click to collapse
Downloads
16GB image: Direct | Torrent
32GB image: Direct | Torrent
64GB image: Direct | Torrent
128GB image: Direct | Torrent
Shield-ifier: Direct | Torrent
Reboot2payload update: Direct
Click to expand...
Click to collapse
Addons / Extras
Joycon Fix: Enables L3/R3 and reports the sticks as analog, which should fix games like GTA: fix-joycon.zip
Click to expand...
Click to collapse
FAQ
Q: How to switch performance profiles?
A: Go to Settings -> Battery -> Power Profiles. The options are Balanced = 1 GHz CPU / 468 MHz GPU, Quick = 1.4 GHz CPU / 768 MHz GPU and Performance = 1.7 GHz CPU / 920 MHz GPU. Keep in mind that the high performance profiles use MUCH more battery.
Q: How will updates be done?
A: For updates, flashable zips will be released.
Q: Can we use TV mode?
A: Use HAL launcher from the Play Store to run apps in TV mode.
Q: Nvidia GameStream doesn’t perform well, what to do?
A: Try using Moonlight instead.
Q: Does Magisk work?
A: Yes, just flash it in TWRP
Q: I get an error about „invalid architecture“ when trying to flash GApps
A: Make sure you mounted System in TWRP
Q: Does this work on any Switch?
A: You will need to be able to boot into hekate. If you can do that, your Switch is compatible.
Click to expand...
Click to collapse
Sources
https://gitlab.com/switchroot/android
https://gitlab.com/switchroot
Instructions for building will come, for the moment ask in discord
Thanks To/Credits
The LineageOS Tegra devs, especially @Steel01
Our testers
Everyone who contributed
Click to expand...
Click to collapse
Stay in touch
Discord: https://discord.gg/9d66FYg
Twitter: https://twitter.com/switchroot_org
Website: https://switchroot.org/
Click to expand...
Click to collapse
XDA:DevDB Information
switchroot LineageOS 15.1, ROM for the Nintendo Switch
Contributors
langer hans, bylaws
Source Code: https://gitlab.com/switchroot
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2019-07-27
Created 2019-07-24
Last Updated 2020-10-05
Reserved
SHA1 sums of the images:
Code:
63c02149407e31c0620c3a0a2079f57e7d2d6855 android-128gb.img.gz
7615277cf2b383dfe32163746debfe2da8683728 android-16gb.img.gz
890c6cc203862f266caaf77fca4616ebe864eee6 android-32gb.img.gz
d5439008ecdb0aa5e9350e6f0848fc0d56578427 android-64gb.img.gz
e90143137a45d5bdecceb708c360742a76532182 shieldifier.zip
Reserved
Reserved
What do the different sized versions do? What happens if I have a 128gb micro sd card and then choose the 64gb image? Does this create a partition automatically for the android stuff and the rest is usable as normal?
Rip download speed x)
We’re working on the server issues. Please some patience
Also the SD card sizes has to be _at least_ the image size you download. Any larger card will just have unallocated space in the end of (sd_size - image_size).
Happy to see you guys finally got the images out, great work. I'll be giving this a try as soon as I get home.
Sweet
langer hans said:
We’re working on the server issues. Please some patience
Click to expand...
Click to collapse
Is it possible to get a torrent going that contains all versions (since you can select which files you want in most clients)? I wouldn't mind help seeding it for a while.
Also, MD5/SHA hashes for the files would be great, both for checking download integrity as well as making sure any mirrored files are genuine.
Citruspers said:
Is it possible to get a torrent going that contains all versions (since you can select which files you want in most clients)? I wouldn't mind help seeding it for a while.
Also, MD5/SHA hashes for the files would be great, both for checking integrity as well as making sure any mirrored files are genuine.
Click to expand...
Click to collapse
I have added the sha1sums to the second post. Official torrents will follow.
Temporary mirror for the 64gb version: removed
edit: the file seems to be corrupt/has a different sha1 hash. I'll reupload when I get the correct one.
langer hans said:
I have added the sha1sums to the second post. Official torrents will follow.
Click to expand...
Click to collapse
Great. I snagged the 32GB drive image already, so I should be able to preseed it.
Huge congrats on the release! And thanks for the 32gb mirror I look forward to seeing this baby in action finally.
If you download an image from anywhere but the links provided in the OP, for the love of god, check the shasums in the second post. Running anything unverified on your Switch can lead to unrecoverable bricks!
Not saying people here would be this malicious, but it’s good practice regardless
Can we put CFW files in the fat32 partition and have Atmosphere and Android in the same SD card the same way we did with L4T?
Can anyone upload a mirror of the shield-ifier? RIP Switchroot.
DXander1337 said:
Can anyone upload a mirror of the shield-ifier? RIP Switchroot.
Click to expand...
Click to collapse
Here courtesy of EpicLPer on discord - it has the right sha1 sum, but check for yourselves!
hippy dave said:
Here courtesy of EpicLPer on discord - it has the right sha1 sum, but check for yourselves!
Click to expand...
Click to collapse
Neo_123 said:
Can we put CFW files in the fat32 partition and have Atmosphere and Android in the same SD card the same way we did with L4T?
Click to expand...
Click to collapse
Yes if it’s just Atmosphere sure. The fat32 partition is 2GB so anything that fits on that is okay. So CFW and some homebrew works. But anything past that would probably be too large.