[UNOFFICIAL][ROM][TESTING] [5.0.1] [I9100] NamelessROM [7/12] - Galaxy S II Android Development

First of all I am not responsible for ANY issues you may experience when using this or flashing this, you mess up your device its your fault
THIS IS FOR SAMSUNG GALAXY I9100 MODEL ONLY! DO NOT ATTEMPT TO FLASH ON ANY OTHER MODEL!
I don't know if this will even boot since i no longer own an I9100 device
INSTRUCTIONS
1. Backup, then do full wipe in recovery
2. Flash this ROM
3. Flash GAPPS
4. REBOOT - Done
Credits:
@duvall & @Lysergic-Acid from github for his hard work bringing up device to lollipop
NamelessROM team of-course for their hard work and great support
Downloads
ROM: Link
GAPPS: Link
Status
Unknown: may not even boot!
Device Sources: Link
XDA:DevDB Information
[UNOFFICIAL][ROM][TESTING] [5.0.1] [I9100] NamelessROM [7/12], ROM for the Samsung Galaxy S II
Contributors
sooti, asimovi
Source Code: https://github.com/NamelessRom
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2014-12-06
Last Updated 2014-12-07

Yupppi
Reserved :good:

Thanks .

Thx,great...

Status 7 error...
?

Reserved also

Reserved

Installing update...
assert failed:write raw image(tmp boot img
dev block
Error in storage sd card 5.0.1 nameless 5.0.1 status 7
Installation aborted

system boot but freeze at some 20/40 sec and stucked.
have to change meta-inf here to avoid Status 7 error . i know i have to change it because i come with dorimanx kernel and dont want to use kitkat compatible kernel to flash this new 5.0.1.
thanks for the advance menu reboot and "back to kill" buton, will be great in next test.
wifi is working
cant see if sdcard was mounted, system didnt let me enought time to check, even i add some app in /data/app, such like rootexplorer....and some other during flash. but system always freeze 40 sec after reboot.
"Custom Launcher" inside.
i see i have no band in 'about phone'
that is my feedback for now.
thanks.

assert failed: write_raw_image("/tmp/boot.img", "/dev/block/mmcblk0p5")
Error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sooti said:
ROM Kernel: Linux 3.1.x
Click to expand...
Click to collapse
Interesting [emoji4]

Awesome More roms for our old phone thanks

Managed to get it to boot, but as @Troubadour666 reported, it freezes after no more than a minute, so still we are not able to test at all. Wifi is apparently working, but baseband is missing here aswell.

Great work @sooti .. Thank you for keeping developing to our old device ;(

OK got correct device repo thanks to @blinoff82
I will try again, it should work next build but will have the same issues as cm-12.0 for i9100 since i'll be using @Caio Schnepper repo
EDIT: Cooking new build, cross your fingers

New build is up, used Lysergic-Acid' repo this time so it should work since nameless is based on CM
EDIT: RIL might not work since i now see i missed a commit, ill upload a fixed one soon, the rest should work

Hope I will can get into download mode after flashing this

sooti said:
New build is up, used Lysergic-Acid' repo this time so it should work since nameless is based on CM
EDIT: RIL might not work since i now see i missed a commit, ill upload a fixed one soon, the rest should work
Click to expand...
Click to collapse
Bro, your rom not installed. Status 7
unmount of /system failed: no such volume
assert failed
Your updater-script is wrong and methinks your boot.img is broken.

Someone can test thi ROM? Thanks @sooti for your work!

Flashing by TWRP cause:
unmount of /system failed; no such volume
assert failed: write_raw_image("tmp/boot.img","/dev/block/mmcblk0p5"")
E:Error executing updater binary in zip '/sdcard/<romname>'
Error flashing zip

I can not install:
CWM 6.0.5.1
Finding update package ...
Opening update package ...
Installing update ...
unmount of /system failed: no such volume
assert failed: write_raw_image("/tmp/boot.img". "/dev/block/mmcblk0p5")
E:Error in /storage/sdcard1/nameless-5.0.1-20141207-9100.zip
(Status7)
Installation Aborted

Related

[ROM][5.0][ALPHA][OFFICIAL][DEB] LiquidSmooth v4.0 For The Nexus 7

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LiquidSmooth is an aftermarket firmware based on AOSP and SlimROM.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP and SlimROM base, and then add the features you crave! While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device. We ask that you do your part to know your device and know how to recover from problems before you flash!
cameron581
cdub50
Cl3Kener
CPA-Poke
deadman96385
iiD4x
johnnyslt
jsnweitzel
liquid0624
liquidzgrl
Ntemis
reginald476
rkpeterson
rwaempires
sandtod
Somber73
sspencer10ls
timpohladthomas
TheBr0ken
Code:
Navigation Bar height
Partition information menu
Disable Immersive Messages
Toast Animations
Disable/Enable screenshot sound
Code:
...
Code:
[url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
[URL="https://github.com/lg-devs/android_kernel_lge_msm8974"]Kernel source[/URL]
Code:
[SIZE="3"][B][URL="http://www.drdevs.com/devs/teamose/timpohladthomas/LiquidSmooth/deb/"]Download DRDEVS.COM [/URL]
[url="https://s.basketbuild.com/filedl/gapps?dl=gapps-lp-20141109-signed.zip"]Gapps Download[/URL][/B][/SIZE]
​
CLICK HERE TO
DONATE AND SUPPORT LIQUIDSMOOTH
​
Contributors
timpohladthomas
CyanogenMod
Source Code: https://github.com/LiquidSmooth
Device Source Code: https://github.com/timpohladthomas
Device Source Code: https://github.com/CyanogenMod
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Alpha
Created 2014-11-13
Last Updated 2014-11-17
Installation Instructions:
Installation Instructions:
1. Boot into latest recovery
2. Wipe everything, even your butt (that includes data, cache, system)
3. Flash
4. Flash Google Apps (if you so choose)
5. Flash SuperSU
6. Reboot
7. Report bugs to us so we can fix them
FAQ:
Why does it say that I am resources are busy or in use? I've unmounted (and tried mounting) /system and /data...
Recovery says this because the script tells it to mount system and data even though they get mounted automatically. Therefore when it tries to mount it and it is already mounted, it gives you that warning. Its NOT an error. Just let it finish and it finishes successfully, then you should be all set.
How would I go about rooting the ROM in its current state?
Download the SuperSu Beta from HERE!
Boot into recovery and flash
Reboot and profit!
Wow, of course, downloading, thank's
I will try BETA-SuperSU-v2.27 and report is everything OK.
Let me know... Because none of my testers have gotten back to. Me... But flo boots and runs great
oh yeah! bout freakin time!!
downloading..... :highfive:
Bootloop for me, clean everything, try to install without gapps and super Su, same problem, stack on Android boot animation over 10 minutes, any suggestions
Sent from my SM-N9005 using Tapatalk
will not boot hangs on Animations android
::bootloop:: :d
Well I will say it does sit there on the boot animation for a while on flo. Can someone get me a logcat please?
timpohladthomas said:
Well I will say it does sit there on the boot animation for a while on flo. Can someone get me a logcat please?
Click to expand...
Click to collapse
oh sorry dude... already back to old rom...
No problem, and sorry guys. I make a habit of NEVER posting anything I havent tested yet, but it works perfect on my FLO so I assumed it worked on DEB. But, you know what they say about assuming. If anyone is any good with adb it would be awesome if you could grab me a logcat. Just out of curiosity, does it sit on the boot animation or the boot logo?
I'll make Logcat late tonight, I'm very busy right now
Sent from my SM-N9005 using Tapatalk
Hangs on final stage of load , if you supersu aftef install , it hangs on app update
BTW, any HowTo for logcat?
animated android logo loop and adb offlined on boot.
Code:
$ adb devices
List of devices attached
094d1850 unauthorized
tried to install the rom.
after install of the rom without gapps, the nexus doesnt boot.
what to do?
timpohladthomas said:
Well I will say it does sit there on the boot animation for a while on flo. Can someone get me a logcat please?
Click to expand...
Click to collapse
I dunno how to logcat, but wanted to report that it stays at "ANDROID" word forever.
downloading...
anyone have a problem on YouTube? sometimes cannot load videos..
happened to me lots of times.
Still no luck , hangs on booting on the latest build
Does this build work with multirom.

[ROM][4.4.4][CM11] S 5 Sport [DOWNLOAD LINK ADDED]

Warning: Nobody is responsible for your actions. Your device is yours and what you do to it is your own doing. Always keep a nandroid & stock odin tar. Also, don't copy command lines from the forum unless you understand what they do.
What Works
Cellular Radio
Camera
Bluetooth(Needs Through Testing)
WiFi
Audio
Proximity Sensor
IR LED
What Has to be Tested
NFC
A big thanks to @1991mustang50 and @Chief_Nodnarb for fearlessly testing this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
My server took a beating. Mirror Updated.
Mirror #1
Install Instructions
1: Preform Factory Reset
2: Install 'sport1815.zip'
3: Optional: Install KK GAPPS
4: Reboot System
5: Report Findings
Reserved
Also Reserved
815turbo said:
Warning: Nobody is responsible for your actions. Your device is yours and what you do to it is your own doing. Always keep a nandroid & stock odin tar. Also, don't copy command lines from the forum unless you understand what they do.
On a lighter note, I don't have a sport; but, you do. You want to run a custom ROM. Here I present a 4.4.4 kernel. I did not build the whole ROM because the SM-G860P runs SM-G900P ROMs with a G860P Kernel. I will do a full build after this kernel has sufficient testing.
Step 1: Flash CM11 ROM for SM-G900P(kltespr)
Step 2: Flash kernel
Step 3: Reboot
Step 4: Report findings
UPDATE: flashable zip attached
NOTE: g860pkernel.zip is not a flashable zip.
Click to expand...
Click to collapse
cant flash cm-11-20141209-nightly -kltespr.zip i get:
this package is for device: kltespr,klte. this device is .
E:Error in /data/media/0/test 4.4.4/cm-11-20141209-NIGHTLY-kltespr.zip
(Status 7)
installation aborted.
i think it has something to do with the way cm is making it for a pacific device! i tryed to flash it first(but i get the error) i also tried to flash kernel then the rom still get the erro. i notice this happen on anything aosp and in unified devlopement thanks for trying i think either rom has to be modded or cm-11 is going to have to be built for the 860p.
Bah, assert failed. Updater script checks build.prop. do you feel comfortable changing something with a little instruction?
1991mustang50 said:
cant flash cm-11-20141209-nightly -kltespr.zip i get:
this package is for device: kltespr,klte. this device is .
E:Error in /data/media/0/test 4.4.4/cm-11-20141209-NIGHTLY-kltespr.zip
(Status 7)
installation aborted.
i think it has something to do with the way cm is making it for a pacific device! i tryed to flash it first(but i get the error) i also tried to flash kernel then the rom still get the erro. i notice this happen on anything aosp and in unified devlopement thanks for trying i think either rom has to be modded or cm-11 is going to have to be built for the 860p.
Click to expand...
Click to collapse
Did you restore a backup after that?
815turbo said:
Did you restore a backup after that?
Click to expand...
Click to collapse
i just flash the stock 860p kernel and rebooted and i can try some things i am not computer programmer or developer
OP Updated
ok i still cant get it to work anybody else?
i flash your cm and kernel reboot and stuck at samsung s5 sport powered by android with the whole kernel is not seandroid enforcing ,and etc
i have tried number of ways meaning wiping everything to formating system, boot, etc rebooting recovery after wiping and flashing rom kernel
no go
Kernel must be borked.
I will check my logs and rebuild tonight.
OP updated.
OP Updated.
I see u are getting it worked out
That log was very necessary, friend. Atop that, I just got @Chief_Nodnarb to get me a radio log so I can try to fix cell service.
OP Updated. Cellular radio is working. Data, SMS, and MMS work. Outbound calls hang at the dialing screen and incoming calls don't show. If you can help work on this ROM I can provide sources and/or ROM zip. PM me.
815turbo said:
OP Updated. Cellular radio is working. Data, SMS, and MMS work. Outbound calls hang at the dialing screen and incoming calls don't show. If you can help work on this ROM I can provide sources and/or ROM zip. PM me.
Click to expand...
Click to collapse
@albinoman887; @tdunham;
can we get help with please and thank you
i have logcat attached
i link to zip pm me if you need or want sources pm @815turbo
I forgot problem is when calling out it goes to calling screen doesnt make any sound and if you hang up it shows it hanging up and gets stuck there till you reboot.
@815turbo did u see what albinoman887 has announced in cm11 thread it at the top and if u read the last page maybe looks like might be source problem maybe?
OP Updated. For working build.
OP Updated again. Mirror added. I will md5sum and upload sources soon. Maybe a moderator can delete some of the 'OP Updated' posts to clean this up a bit?
Would someone running this be kind enough to open the terminal emulator and run 'getprop ro.bootloader' for me?
@Chief_Nodnarb @1991mustang50

[ROM][T531] Aj's Tab 4 ROM [February 10, 2017]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B]*** Disclaimer***[/B]
IF YOUR DEVICE IS ALREADY ROOTED TAKE A " BACKUP " OF YOUR FULL ROM
INCLUDING " EFS " using " TWRP " to your SD Card
*I Am NOT RESPONSIBLE IF YOU DAMAGE YOUR DEVICE*
*I Am NOT RESPONSIBLE IF YOUR ALARM FAILS TO RING AND YOU GET FIRED FOR BEING LATE*
*I Am NOT RESPONSIBLE IF YOUR DEVICE CONVERT TO NOTE 7 AND EXPLODE*
*Your Warranty Will be VOID If you Flash TWRP Recovery and ROM*
Based on T531XXU1BPK3/T531XXU1BOE6 (Novemeber 1, 2016 patch)
Extremely Deboated (still keeping all core features)
Deodexed
Zip-aligned
200% De-Knox(remove ASKS security also)
Rooted with the latest SuperSU v2.79 SR3
Added the latest Busybox v1.25.1
Added latest Sqlite3 v3.12.1
ROM size only 581 mb
Removed safe volume warning
Completely removed Signature verification
Added 5 way reboot menu
Added extra toggles to notification panel
Set animation scale to x.25 on system level
Added welcome text
Many many more coming, this is only the first build.
===>DOWNLOAD<=== only use twrp from below!!!
IF YOU ARE COMING FROM KITKAT FLASH THIS MODEM AND BOOTLOADER IN ODIN.
1. Flash this TWRP In Odin [ONLY USE THIS TWRP- RILL WONT WORK IF YOU USE OTHER VERSIONS!
2. Reboot into TWRP
3. Wipe System/Data/Cache,Dalvik Cache
4. Flash ROM Wait at least 5 minutes for first boot.
XDA:DevDB Information
[ROM][T531] Aj's Tab 4 ROM, ROM for the Samsung Galaxy Tab 4
Contributors
jonathanmohamed
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2017-02-10
Created 2017-02-10
Last Updated 2017-02-09
@jonathanmohamed - ROM
@ASSAYYED - Rom Kitchen
@Chainfire - SuperSu v2.79 SR3
@sub77 - TWRP
@yash92duster & @amtra - Advice & various things
XDA Community and everyone is S5 and S6 Unified Threads
1. Why isn't Wifi working?
=> Because you didnt read, i specifically said to you the TWRP from above.
2. Can this work one other Tab 4 Devices?
=> No only for T531
3. Why can't i take screenshot?
=> Method 1. Open root explorer go to Internal SD card and either delete "Pictures" folder or rename it to "Pictures1"
Youtube guide if needed https://www.youtube.com/watch?v=NWOimkOHXt4
=> Method 2: Reboot into TWRP, go to Advanced/File Manger/sdcard/Pictures - then either delete the folder or rename it to "Pictures1"
=> Method 3: Do a compete clean installation, incl. Internal Storage wipe
reserved 2
reserved 3
Any screenhot ?
nar67 said:
Any screenhot ?
Click to expand...
Click to collapse
really, its just stock based... but sure ill post some, check back later.
So far my system (SM-T531) is good.
I'm looking for a ROM for my tab that will enable my Sim Card and a stable wifi again, even the camera is working now.
Tried the marshmallow and nougat custom roms but I can't trade those stuff for now.
thanks for this @jonathanmohamed (AJ?)
wifi doesn't work even with specified TWRP
no wifi fresh install using the twrp specified SMT531 .
waze magma said:
no wifi fresh install using the twrp specified SMT531 .
Click to expand...
Click to collapse
Fixed the prob my self by flashing the modem and bootloader .
waze magma said:
Fixed the prob my self by flashing the modem and bootloader .
Click to expand...
Click to collapse
Please tell what modem and bootloader are you flashed?
I used this TWRP androidfilehost.com/?fid=24052804347828381 to wipe and flash ROM, and flashed this CP & BL androidfilehost.com/?fid=817550096634744770 via Odin, but wifi still doesn't want to turn on
N2off said:
Please tell what modem and bootloader are you flashed?
I used this TWRP androidfilehost.com/?fid=24052804347828381 to wipe and flash ROM, and flashed this CP & BL androidfilehost.com/?fid=817550096634744770 via Odin, but wifi still doesn't want to turn on
Click to expand...
Click to collapse
they are specified in the post, I used the same as yours and it works perfectly, but nothing special in the rom it's a fully rooted stock rom with some bugs and that's all.
https://www.androidfilehost.com/?fid=817550096634744770
wi fi
does your rom have wi fi problem where it wont turn on

[ROM][UNOFFICIAL][6.0.1] Flyme 6 For Nexus 5 [03/03/2018]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flyme OS 6.7.12.29IR (international version) for Nexus 5
Bugs
Screenshots are kind of stretched
You tell me
Flashing Instructions:
Unlock the bootloader and install TWRP
Boot to recovery mode
Factory reset
Install ROM
Reboot
The first boot needs 15-20 minutes.
Code:
/* Your warranty is now void. I am not responsible for bricked devices or any damage.
Making any modifications to your device is your own choice only! */
Download:
https://drive.google.com/file/d/16Ds5kd2w1sCnCULbczRVdGb2aZ0o2LqS/view?usp=sharing
Sources:
https://github.com/FlymeOS/manifest
https://github.com/svncibrahim/flyme_device_hammerhead_cm
XDA:DevDB Information
FlymeOS 6 for Nexus 5, ROM for the Google Nexus 5
Contributors
svncibrahim
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On:
Code:
cm-13.0-ZNH5YAO3Z2
Version Information
Status: Beta
Beta Release Date: 2018-03-01
Created 2018-03-03
Last Updated 2018-03-03
flyme_Nexus-5_6.7.12.29IR.zip
I flashed it with no problem, but the boot process just stucks on Flyme animation. Shadу APKs inside, by the way.
system/priv-app/Browser/Browser.apk = ZIP = assets/plug.jar = ZIP = classes.dex - modified Android/SMSreg.XM
system/priv-app/Video/Video.apk = ZIP = assets/YoukuPluginVideo_926_prd.apk = ZIP = classes.dex - modified Android/Apptrack.C
I figured out how to boot it: phone encryption must be off.
I flashed it and everything looks fine, the first boot took quite a long time, maybe 25 minutes to finally show the welcome screen, i almost forgot about it
Awesome ROM. Flashing right now! There's a chance to see the 6.3.x version?
Jilz87 said:
Awesome ROM. Flashing right now! There's a chance to see the 6.3.x version?
Click to expand...
Click to collapse
Sorry. I just build 6.7.x and 6.8.x versions.
I get an error when installing, I have the last baseband and I have the latest version of the trwp, I need to know the solution in advance thanks.
Akira38 said:
I get an error when installing, I have the last baseband and I have the latest version of the trwp, I need to know the solution in advance thanks.
Click to expand...
Click to collapse
Can you send a log or an error message?
svncibrahim said:
Flyme OS 6.7.12.29IR (international version) for Nexus 5
Bugs
Screenshots are kind of stretched
You tell me
Flashing Instructions:
Unlock the bootloader and install TWRP
Boot to recovery mode
Factory reset
Install ROM
Reboot
The first boot needs 15-20 minutes.
Code:
/* Your warranty is now void. I am not responsible for bricked devices or any damage.
Making any modifications to your device is your own choice only! */
Download:
https://drive.google.com/file/d/16Ds5kd2w1sCnCULbczRVdGb2aZ0o2LqS/view?usp=sharing
Sources:
https://github.com/FlymeOS/manifest
https://github.com/svncibrahim/flyme_device_hammerhead_cm
XDA:DevDB Information
FlymeOS 6 for Nexus 5, ROM for the Google Nexus 5
Contributors
svncibrahim
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On:
Code:
cm-13.0-ZNH5YAO3Z2
Version Information
Status: Beta
Beta Release Date: 2018-03-01
Created 2018-03-03
Last Updated 2018-03-03
Click to expand...
Click to collapse
I am getting an error as insufficient storage while flashing pico gapps after flashing the rom(also tried the minimal gapps but i am still getting the same error) can anyone please help me out
:crying:
Can you send a log or an error message?
in twrp I get error 7
I tried to erase the lines of meta-data without success
help
Neroi said:
in twrp I get error 7
I tried to erase the lines of meta-data without success
help
Click to expand...
Click to collapse
check system partition is unmounted before installation. If mounted unmount system and try install rom.
if error still going on send a twrp log
twrp -> advenced -> Copy log

[LineageOS-17.0][10.0.0_r2][UNOFFICIAL][sanders] - 05/10/2019

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
We are not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
What's working :
RIL (Calls, Sms, Data,Volte)
Fingerprint
Wifi
Bluetooth
Audio
Sensors
Hotspot
Known issues:
Camera doesn't work
Instructions:
Download the latest build
Reboot To Recovery
Flash The Build
Reboot
Downloads:
Rom- https://androidfilehost.com/?fid=8889791610682949763
Credits:
Xyyx for Sources
XDA:DevDB Information
LineageOS-17.0 For Sanders, ROM for the Moto G5S Plus
Contributors
#Rohan, #Rohan
Source Code: https://github.com/DRohan007/android_kernel_motorola_msm8953-
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Based On: LineageOs
Version Information
Status: Beta
Current Beta Version: 10.0.0_r2
Beta Release Date: 2005-10-19
Created 2019-10-05
Last Updated 2020-10-01
Waiting screenshot
what recovery recommend?
M4T145 said:
what recovery recommend?
Click to expand...
Click to collapse
Twrp or shrp
Today, I tried to swipe this. Everything was normal. Later, I thought of root. After swiping the magic with twrp, the system will continue to enter the boot mode after rebooting...:哭泣:
---------- Post added at 02:58 PM ---------- Previous post was at 02:54 PM ----------
English is so poor that some of the meanings of English and Chinese translation have changed……
Testing. Magisk don't work and causes bootloop
G apps
Were From Download android 10 Gapps. And Please add Gcam in it if Possible. I Flash This from first but it don't have Gapps. Later i Download From Other Side andriod 10 gapps but setup ui crash and can't setup.So Please send Link of Proper Gapps With this Version Compatible.
MujeebUrRehman said:
Were From Download android 10 Gapps. And Please add Gcam in it if Possible. I Flash This from first but it don't have Gapps. Later i Download From Other Side andriod 10 gapps but setup ui crash and can't setup.So Please send Link of Proper Gapps With this Version Compathttps://forum.xda-developers.com/android/software/arm64-bitgapps-q-10-0-0-t3968500ible.
Click to expand...
Click to collapse
try with these gapps, they worked for me :
https://forum.xda-developers.com/android/software/arm64-bitgapps-q-10-0-0-t3968500
@dev rohan, thanks for such a nice rom..., could yuo please guide for the proper version # or method to root with magisk as i am unable to do so, always ended at boot logo..!!
Okay i again Flash This Rom Now and Tell you Update of Error if in Rom. please add Camera that capture Depth images Gcam if Possible Please.
MujeebUrRehman said:
Okay i again Flash This Rom Now and Tell you Update of Error if in Rom. please add Camera that capture Depth images Gcam if Possible Please.
Click to expand...
Click to collapse
...or op focuses on the rom and you install a compatible gcam by yourself, like everyone of us does.
was the non-working Magisk still 19.x release? wu just released magisk 20 and claims it is android 10 compatible, atleast in the release notes i read last night before updating to it. the "magisk doesn't work with this" warning might or might not be out of date. i suppose if i find the time this weekend i can guinea pig it, if it would make sense to, but if one of you gets fiesty and tries it, please share your results. thoughts? (before i go wasting hours )
Hey Guys please give a link to Which Twrp is used to flash this rom. Thanks
mackikzy said:
Hey Guys please give a link to Which Twrp is used to flash this rom. Thanks
Click to expand...
Click to collapse
https://sourceforge.net/projects/ba...s-S-1.5.0-20190622-0302-OFFICIAL.zip/download
Has anyone tried Magisk with the newest update from Oct 14 with Android 10 support?
Feedback From Using on My XT1806
I just tested this ROM. After a few spontaneous reboots, the OS settled down and was very stable and GPS connected quickly. My only issues are:
1. "Chrome Isn't Responding" - Chrome keeps freezing within a minute of use
2. The battery indicator on the status bar won't change to my preferred circle with percentage inside despite the settings being set
I've attached bug report and pics and look forward to trying the next release. Thanks for the great work!
How can I get moto actions here?
and also choosing black dark mode from style crash the settings app

Categories

Resources