Related
Hi,
I've recently purchased a Huawei Mediapad Tablet running honeycomb 3.2.
I would like to root this tablet but am unable to find any guides on the web.
Any pointers and guides would be much appreciated.
Thanks
bump for you interested to know as well
Yeah, I also bought mediapad last 2 weeks, this honeycomb really unstable, hang/reboot very often. And when I switched to full resolution 1280x800, you can feel lagging. Disappointed with stock ROM.
i want to root huawei mediapad su302,please,thanks
Same here...
Just picked on up tonight, not bad hardware but the os needs a kick in the a$$.
Lets get this going people, time is a wasting!
I have beginner modding skills if anyone wants to help me start this?
Recently, I read some reference from some Chinese Forum..
There are Rooted ROMs... and tutorials about how to root by youself..
If you decide to create a rooted rom by yourself..
You need a Linux environment to do that...
Here's how I did mine...
1. First of All, download the latest ROM from Huawei official site..
http://www.huaweidevice.com/worldwide/technicaIndex.do?method=gotoProductSupport&productId=3779&tb=0
2. Unzip it, you'll have a folder "dload"
3. Extract the file" system.img.ext4" from the Update.zip
4. Copy the "system.img.ext4" into your Linux Environment..
5. mount the image file like these...
#mkdir /mnt/tmp
#mount -o loop system.img.ext4 /mnt/tmp
6. put the "superuser" binary into the path /mnt/tmp/xbin
#cp su /mnt/tmp/xbin
7. Assgin the correct permission to the su binary
#chmod 6755 /mnt/tmp/xbin/su
8. Unmount the path and copy the system.img.ext4 into the original Update.zip
#umount /mnt/tmp
9. Put the "dload" folder into the root directory of a Micro-SD
10. Power Up your mediapad, when it vibrates, press and hold Volume Down until you see the Android icon, and it will try to flash the new ROM.
11. After everything is done, Look for Super User from Market, you'll see.
--
For su binary.. you can find it here http://androidsu.com/superuser/
Here's the product of all the above steps...
http://www.multiupload.com/0WPLQILCGH (114.73MB)
(I was using the official ROM dated 26 November..
and Put the su binary Together the superuser app into the system directory.
nothing else I have done to the ROM..)
You can also flash the system.img.ext4 into your mediapad directly via fastboot
to activate the fastboot mode of mediapad..
1. Connect your mediapad to your Computer with USB cable
2. Power up the mediapad with Volume Up button press and hold until your computer sense it and install the correct driver for it.
3. Direct flash your mediapad like this..
fastboot flash system system.img.ext4
then, reboot your mediapad..
you'll have your apps un-touched, while you have the latest system. enjoy~!
--
Fastboot, extracted from the Android SDK..
Many thanks squide, especially for the system image. I was too lazy to break out ubuntu...
I now have a rooted mediapad.
However the command below did not work for me.
squide said:
3. Direct flash your mediapad like this..
fastboot flash system.img.ext4
.
Click to expand...
Click to collapse
I had to use fastboot flash system system.img.ext4
last rom with root + busybox + some app
http://uploading.com/files/53f162e9/dload.rar/
I can now run my favourite titanium backup.
squide said:
Here's the product of all the above steps...
http://www.multiupload.com/0WPLQILCGH (114.73MB)
(I was using the official ROM dated 26 November..
and Put the su binary Together the superuser app into the system directory.
nothing else I have done to the ROM..)
You can also flash the system.img.ext4 into your mediapad directly via fastboot
to activate the fastboot mode of mediapad..
1. Connect your mediapad to your Computer with USB cable
2. Power up the mediapad with Volume Up button press and hold until your computer sense it and install the correct driver for it.
3. Direct flash your mediapad like this..
fastboot flash system.img.ext4
then, reboot your mediapad..
you'll have your apps un-touched, while you have the latest system. enjoy~!
--
Fastboot, extracted from the Android SDK..
Click to expand...
Click to collapse
Thanks. Manage to root my mediapad without losing the installed apps.
Btw use this link to get the fastboot
http://dl.google.com/android/android-sdk_r13-windows.zip
squide said:
5. mount the image file like these...
#mkdir /mnt/tmp
#mount -o loop system.img.ext4 /mnt/tmp
Click to expand...
Click to collapse
Which distro are you using?
I'm having some problems writing to the image after mounting it as a loop back for Ubuntu 10.4
just a question about this device as GSMarena shows GSM support does it mean the you can use it as a phone.
freeko2 said:
just a question about this device as GSMarena shows GSM support does it mean the you can use it as a phone.
Click to expand...
Click to collapse
It's been discussed quite a bit in the Hardwarezone forum. I cannot post a link yet, so just google for 'mediapad hardwarezone forum'.
You need to install the HuaweiMediaPadPhone.apk which you can request from those in the forum. You can also find the link for Mediafire on the forum.
Once you install the apk, you will get the standard Phone and Messaging apps which you can use to make phone calls over GSM and also SMS. Working well for me.
venomrat said:
Many thanks squide, especially for the system image. I was too lazy to break out ubuntu...
I now have a rooted mediapad.
However the command below did not work for me.
I had to use fastboot flash system system.img.ext4
Click to expand...
Click to collapse
Thanks. I had a lab full of Linux systems, so I tried to put the 'su' in myself. Thanks to this fastboot procedure, I have a rooted system with no apps lost.
venomrat said:
Many thanks squide, especially for the system image. I was too lazy to break out ubuntu...
I now have a rooted mediapad.
However the command below did not work for me.
I had to use fastboot flash system system.img.ext4
Click to expand...
Click to collapse
So did you Root it with a PC?
Could you give me some info on how you did this?
I have sdk r13 & fastboot (is 1.img the file I need to flash?)
It's quite easy. just ensure.
1. Your Android SDK is installed correctly
2. Mediapad Fastboot USB driver is detected
3. get the correct system.img.ext4
4. Ensure fastboot works before issuing the flash command
by doing this you would not lose the current installed apps as this would only flash the
updated system plus root binary. After doing so please download superuser from android market
the flash process take less than 10 minutes.
btw i use this command
fastboot flash system system.img.ext4
yup i use a pc to this.
disclaimer:
there's risk of bricking your mediapad. do it at your own risk.
Thanks,
I might try this.
Where can I find system.img.ext4?
DUH!!!! I unzipped the Hauwei firmware folder update.zip and found it - that's the right one right?
---------- Post added at 02:37 PM ---------- Previous post was at 01:55 PM ----------
Also, I don't know if you saw or not, but I lost 4G connection since I originally had a T-Mobile SpringBoard and flashed the Hauwei firmware to it. Do you think rooting it will allow the 4G again? If so, would it be easy for a 'tard like me to do ?
yup that's the right file. I'm using mediapad.
Probably this rom resources file does not have the 4g icon.
Do you still have the same broadband speed?
Can you please verify this using speedtest?
Here's my recent speeds (3G). I wish I would've saved my 4G tests, but didn't realize I was going to loose all of that.
https://skydrive.live.com/redir.asp...372FEF79249B184B!172&authkey=!AHnxi6Q8Yj6srLQ
Also, what do you know about typing ()()2846579()()+ in the calculator. Can anything really be modified here? I've played around with the preferred frequencies and radio bands, but not sure what's really going on. And I think some of it goes back to a default anyway.
I was hoping that something like no 4G icon was the issue, but looking at the speeds (these are test from an area that I know get 4G speeds). I go to:
Settings >Mobile networks>Network operators>Search networks I only see T-Mo and AT&T 2G & 3G
Hi to All,
Well I got an ASUS TF201 March 2012 and I never messed with it much, just net surfing and watching movies and listening to music....
I wanted to get rid of some apps that I dont use at all e.g Amazon Kindle but found out with research that I can do that. Also tried to use apps like Titanium Backup again I couldnt. I am new to the Tablet world this is my first. So I did some research and terms of root, unlock etc came up. So I know the difference between them. In order not to lose my warranty and since I just want to be able to delete certain unwanted apps and add other apps, I just want to for now root my TF201.
Did more research but I still cant get an answer or get some of the methods to work for me.
Below is the specs for my Asus TF201
1. So I have JB (Android Version 4.1.1), dont know if it came with it or got updated like I said I didnt mess with the tablet alot
2. Build #: JRO03C.US_epad-10.4.2.17-20121018
I plugged in the USB to my Windows XP laptop for the first time today and ofcourse I am missing the drivers. I went to ASUS website and couldnt figure what I need.
1. Does anyone have the ASUS Sync that I need on my laptop
2. Also does anyone have the drivers that I need on my laptop so my ASUS is recognized. I installed some drivers from the xda forum to use the DebugFS Root but got a message that I need to install the latest drivers. Does anyone have them or can tell share a link for me to get them.
All I want basically is to have the current drivers on my laptop and the ASUS Sync thing and be able to ROOT my tablet. Most of the threads I read are for the Android Version ICS 4.0.
Any help on this is greatly appreciated
Thanks
RB
ramez75 said:
Hi to All,
Well I got an ASUS TF201 March 2012 and I never messed with it much, just net surfing and watching movies and listening to music....
*SNIP*
1. Does anyone have the ASUS Sync that I need on my laptop
2. Also does anyone have the drivers that I need on my laptop so my ASUS is recognized. I installed some drivers from the xda forum to use the DebugFS Root but got a message that I need to install the latest drivers. Does anyone have them or can tell share a link for me to get them.
All I want basically is to have the current drivers on my laptop and the ASUS Sync thing and be able to ROOT my tablet. Most of the threads I read are for the Android Version ICS 4.0.
Any help on this is greatly appreciated
Thanks
RB
Click to expand...
Click to collapse
Asus Suite including Sync:
http://support.asus.com/Download.as...ite_v1_0_41.zip#ASUS_Pad_PC_Suite_v1_0_41.zip
I just went through the unlock part yesterday so fresh in the mind it ASSUMES AN SD CARD IS INSTALLED and WINDOWS OS!
Asus Unlock Tool:
http://support.asus.com/Download.as...ck_Device_App_V6.apk#UnLock_Device_App_V6.apk
Get TWRP for TF201Jellybean:
TWRP Page
On that page are instructions including a download link for JB BOOTLOADER ONLY! MAKE SURE YOU GET THE RIGHT TWRP FILE FOR YOUR DEVICE. THE ICS ONE IF YOU ARE ON ICS, OR THE JB ONE IF YOU ARE ON JB:
http://techerrata.com/file/twrp2/tf201/openrecovery-twrp-2.3.1.0-tf201-jb.blob
I got ADB from several sources but this "root method" http://forum.xda-developers.com/showthread.php?t=1886460 from bin4ry is what I have been using: (And no, it doesnt work for the prime because the exploit he uses to run the device in emulator mode doesnt work for us)
Download bin4ry's root tool to get the ADB file
When that is downloaded you can compare the MD5 hash because its a good idea to do that. You can find something like winMD 5 generator:
http://www.winmd5.com/download/winmd5free.zip
Use it to generate an MD5 hash of the TWRP download to what it saysthe files MD5 hash is on the download web page. If I remember correctly I had to manually type in the MD5 hash from the page because it was an image I couldnt just copy. Or you can just visually verify with the one generated by winmd5.
Then I downloaded Ultimate Backup Tool from here:
http://goo.gl/iOUwe
Unzip it so you have fastboot.exe
Rename the TWRP you downloaded to TWRP.blob and copy it to where you have fastboot unzipped.
Finally download SuperSU zip file from:
http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip
Now we need to unlock the device. Copy the unlocker APK to the SD card. Run a file explorer on our tables and browse to the SD card (/Removable/MicroSD). Tap the APK to install. Once installed run the Icon for the unlocker and follow directions. There are several warnings etc.. You will need wifi connected and it will unlock your device and VOID YOUR WARRANTY!.
The unlock will take a few minutes. When it is successfull you will see a notice on device boot up that says the device is unlocked.
Once unlocked, power it off. Once off power it onby holding BOTH volume down and power buttons. When you see the menu appear the first option is RCK. press Volume Down to change the cursor to be over the USB logo (two presses of the button) and press volume up. This puts your device in fastboot mode
Back on your computer you should hopefully see a successfull driver install. I got drivers from downloading and installing the Android SDK so you may or may not need to do that. Android SDK
If all is prepared and you are in fastboot with drivers loaded:
On your computer hold shift and right click on the folder where fastboot and the twrp.blob file are and you will see a context menu. Click on "Open Command Window Here"
if you don't get the command window here option then you will have to open a command prompt. open the run dialog and type CMD and hit enter. This will get a dos command windows. Use the change directory (CD) command to change the current folder in the DOS window to where your fastboot file and TWRP.blob are.
In the command window paste:
fastboot -i 0x0b05 flash recovery twrp.blob
and hit enter
Let it runs its course. When done I had a black screen with ASUS in the middle and a blue-ish bar across the bottom that was filled. I had to hold power until it rebooted.
Once I confirmed my Stock OS loaded I copied the Super SU zip file we downloaded above over to the device via the USB cable to the root of my SD card. Once the copy complets shutdown the device again.
Once off, power it on and press and hold both the power buttons and volume down again. When the menu appears you should already have RCK (recovery) hightlighted so press volume up to load TWRP recovery.
Once TWRP loads the top left option is "Install" tap that.
You will see a few choices, select the radio button to install from SD card (external source it may say). Tap the super su zip file: Superuser-3.1.3-arm-signed.zip to choose it.
Slide the slider at the bottom to the right.
This will flash superSU to your device. When done, reboot (should only take a few seconds).
When you boot up SuperSU is installed.
To test root with ADB:
Your tab must be plugged in to the USB port of the computer of course.
If you installed the SDK tools it is there or use the one from bin4ry's root tool as follows:
Unzip the downloaded root tool from bin4ry mentioned above. Use the command windows to change directory of the unzipped folder and further in to the "STUFF" folder. type:
adb shell
<hit enter>
after a few seconds you should see a $ prompt and your are in to the console of your tablet.
Type:
su root
<hit enter>
Superuser will prompt you to grant root permissions and I set the setting so it doesnt prompt me every time.
Your prompt will change to # and thats it, you are root.
I don't seem to have the command sudo on my tab so every time in a terminal I want root I will type that su root to get the # prompt.
Any apps that need root can now ask for it, you will get that same "Grant" prompt and do so if that is what you want.
ADB will now yield Root when you type: SU root and hit enter (grant root privs in the popup)etc...
Edits:
I have editted this based on questions below to make it more complete..
First Thank yo uso much for taking the time and sharing the good info. Ofcourse there is alot of foreign terminology you have used and I will need to read you reply a number of time till it soaks in and I am sure I will have follow-up questions.
So it seems the only way I can get to root my TF201 (running JB) is to unlock it which means losing the warranty. Well if thats the only route then so be it....
I guess first thing is to successfully unlock the TF201
hx4700 Killer said:
Asus Suite including Sync:
http://support.asus.com/Download.as...ite_v1_0_41.zip#ASUS_Pad_PC_Suite_v1_0_41.zip
I just went through the unlock part yesterday so fresh in the mind it ASSUMES AN SD CARD IS INSTALLED and WINDOWS OS!
Asus Unlock Tool:
http://support.asus.com/Download.as...ck_Device_App_V6.apk#UnLock_Device_App_V6.apk
Get TWRP for TF201Jellybean:
http://teamw.in/project/twrp2/93
On that page are instructions including a download link for JB BOOTLOADER ONLY!:
http://techerrata.com/file/twrp2/tf201/openrecovery-twrp-2.3.1.0-tf201-jb.blob
When that is downloaded you can compare the MD( its a good idea to do that). You can find something like winMD 5 generator:
http://www.winmd5.com/download/winmd5free.zip
Use it to generate an MD5 hash of the TWRP download to what it says on the web page. If I remember correctly I had to manually type in the MD5 hash from the page because it was an image I couldnt just copy. Or you can just visually verify with the one generated by winmd5.
Then I downloaded Ultimate Backup Tool from here:
http://goo.gl/iOUwe
Unzip it so you have fastboot.exe
Rename the TWRP you downloaded to TWRP.blob and copy it to where you have fastboot unzipped.
Finally download SuperSU zip file from:
http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip
Now we need to unlock the device. Run the unlocker tool you downloaded. For here its fuzzy for me because I found the APK file I got from the Asus download and copied it over to my tablets SD card via USB. Then I used the built in file browser to find it on my SD card and ran it. By whatever means you will need to run the unlocker tool on your tablet to unlock. You will need wifi connected and it will unlock your device and VOID YOUR WARRANTY!.
The unlock will take a few minutes. When it is successfull you will see a notice on device boot up that says the device is unlocked.
Once unlocked, power it off. Once off power it onby holding BOTH volume down and power buttons. When you see the menu appear the first option is RCK. press Volume Down to change the cursor to be over the USB logo (two presses of the button) and press volume up. This puts your device in fastboot mode
Back on your computer you should hopefully see a successfull driver install. I got drivers from downloading and installing the Android SDK so you may or may not need to do that. Android SDK
If all is prepared and you are in fastboot with drivers loaded:
On your computer hold shift and right click on the folder where fastboot and the twrp.blob file are and you will see a context menu. Click on "Open Command Window Here"
In the command window paste:
fastboot -i 0x0b05 flash recovery twrp.blob
and hit enter
Let it runs its course. When done I had a black screen with ASUS in the middle and a blue-ish bar across the bottom that was filled. I had to hold power until it rebooted.
Once I confirmed my Stock OS loaded I copied the Super SU zip file we downloaded above over to the device via the USB cable to the root of my SD card. Once the copy complets shutdown the device again.
Once off, power it on and press and hold both the power buttons and volume down again. When the menu appears you should already have RCK (recovery) hightlighted so press volume up to load TWRP recovery.
Once TWRP loads the top left option is "Install" tap that.
You will see a few choices, select the radio button to install from SD card (external source it may say). Tap the super su zip file: Superuser-3.1.3-arm-signed.zip to choose it.
Slide the slider at the bottom to the right.
This will flash superSU to your device. When done, reboot (should only take a few seconds).
When you boot up SuperSU is installed. ADB will now yield Root when you type: SU root and hit enter (grant root privs in the popup)etc...
Click to expand...
Click to collapse
Yes, unlock it. There is no root method for tf201 on JB outside of unlock. An exploit may come up some day but nothing soon I would wager.
I tried to organize it by Al the stuff you need to download first. Then steps to use what you downloaded. It you follow it precisely things would become clearer.
Hi,
Ok I was going through the instructions and downloading all the necessary files and I ran into an issue with downloading the TWRP for JB. Well the link you have allows me to download either the *.img or the *.blob extensions. So I went ahead and downloaded the *.blob extension. I did the MD5 as you recommended and visually checked it with the image on the website and they dont match. I got the below
"b6bae17dac81a126d5d3ad8e27fd5007" which is entirely different than the one on the webpage. I also tried the *.img and no luck there. So I stopped. What do I do now where can I get the TWRP
Thanks
hx4700 Killer said:
Get TWRP for TF201Jellybean:
http://teamw.in/project/twrp2/93
On that page are instructions including a download link for JB BOOTLOADER ONLY!:
http://techerrata.com/file/twrp2/tf201/openrecovery-twrp-2.3.1.0-tf201-jb.blob
When that is downloaded you can compare the MD( its a good idea to do that). You can find something like winMD 5 generator:
http://www.winmd5.com/download/winmd5free.zip
Use it to generate an MD5 hash of the TWRP download to what it says on the web page. If I remember correctly I had to manually type in the MD5 hash from the page because it was an image I couldnt just copy. Or you can just visually verify with the one generated by winmd5.
Click to expand...
Click to collapse
hx4700killer
I did some googling and found the below link
http://forum.xda-developers.com/showthread.php?t=1510737
the link has "Direct apk link (dropbox)"....Is this what you referred too? I downloaded the file, should I move it to the SD card and run it from within the tablet?. Is there a way to run an apk file.
Also
I downloaded Android SDK on my laptop. I run the eclipse.exe as per the instructions on the website but nothing happens
Thank you
RB
Download the APK from the link I gave above. It comes straight from ASUS. I had gotten it 2 months ago and I guess I thougth I had run an installer and copied the APK from there but it is in fact just an APK to download directly.
When you copy it to the SD card nothing is needed to run it. Just tap on the file in a file explorer on the tablet and it will install itself. once installed run the installed unlock app and follow the directions.
The link from ASUS has a zip file. So i did download it and extract it to the SD card. Moved the SD card to the tablet but there is no apk file.....Also do i use the twrp file even if the md5 didnt match.
Thanks
Sent from my Transformer Prime TF201 using xda app-developers app
ramez75 said:
The link from ASUS has a zip file. So i did download it and extract it to the SD card. Moved the SD card to the tablet but there is no apk file.....Also do i use the twrp file even if the md5 didnt match.
Thanks
Sent from my Transformer Prime TF201 using xda app-developers app
Click to expand...
Click to collapse
The second link that says it is for the unlock tool is the APK.
Ok the unlock worked successfully. So my TF201 is unlocked.
Following the rest of your post, next thing on the hit parade is to have the correct TWRP for JB (Open_recovery_TWRP.blob). At this point the MD5sum using WinMD doesnt match the image on the website. Do I still go ahead and use it or will it cause issue....
Ofcourse I dont understand what is the use of the MD5sum number
Thanks
hx4700 Killer said:
Download the APK from the link I gave above. It comes straight from ASUS. I had gotten it 2 months ago and I guess I thougth I had run an installer and copied the APK from there but it is in fact just an APK to download directly.
When you copy it to the SD card nothing is needed to run it. Just tap on the file in a file explorer on the tablet and it will install itself. once installed run the installed unlock app and follow the directions.
Click to expand...
Click to collapse
ramez75 said:
Ok the unlock worked successfully. So my TF201 is unlocked.
Following the rest of your post, next thing on the hit parade is to have the correct TWRP for JB (Open_recovery_TWRP.blob). At this point the MD5sum using WinMD doesnt match the image on the website. Do I still go ahead and use it or will it cause issue....
Ofcourse I dont understand what is the use of the MD5sum number
Thanks
Click to expand...
Click to collapse
The MD5 is confirmation that what you downloaded matches what was uploaded to the server. It runs an algorithm against the file contents and generates that long number. When you compare the number to what is on the server page they should match.
If they don't match then HELL NO do not flash it or you will have a bricked device. Redownload it and don't flash anything unless the MD5 matches.
I totally missed that you posted this above or I would have told you sooner.
Thanks, well then i cant use that link i cant get the MD5 to match. I will google and see if I can find a twrp file that will work for me
hx4700 Killer said:
The MD5 is confirmation that what you downloaded matches what was uploaded to the server. It runs an algorithm against the file contents and generates that long number. When you compare the number to what is on the server page they should match.
If they don't match then HELL NO do not flash it or you will have a bricked device. Redownload it and don't flash anything unless the MD5 matches.
I totally missed that you posted this above or I would have told you sooner.
Click to expand...
Click to collapse
ramez75 said:
Thanks, well then i cant use that link i cant get the MD5 to match. I will google and see if I can find a twrp file that will work for me
Click to expand...
Click to collapse
This is the MD5 hash that you should get:
19d93f4ec4685b8124468684eb2913fc
This is the exact download link I used for my TF201 running the most recent JB Update:
http://techerrata.com/file/twrp2/tf201/openrecovery-twrp-2.3.1.0-tf201-jb.blob
The file you get is: openrecovery-twrp-2.3.1.0-tf201-JB.blob which is the one I say to rename to twrp.blob
I would NOT flash anything not from the source on this one. If its wrong your device is trash.
Hi again,
Ok so i got the correct TWRP.blob and I changed its name and put it in the folder with fastboot.exe. i plugged in my tf201 to my laptop followed the power volume sequence. I held the shift and right clicked on the folder but i didnt see "Open command window here". So how do i got about that. Do i use the "cmd" in the run from start to open the black dos screen and change directory (cd..) till i get to the folder that has the fastboot.exe
Thanks
hx4700 Killer said:
Once unlocked, power it off. Once off power it onby holding BOTH volume down and power buttons. When you see the menu appear the first option is RCK. press Volume Down to change the cursor to be over the USB logo (two presses of the button) and press volume up. This puts your device in fastboot mode
Back on your computer you should hopefully see a successfull driver install. I got drivers from downloading and installing the Android SDK so you may or may not need to do that. Android SDK
If all is prepared and you are in fastboot with drivers loaded:
On your computer hold shift and right click on the folder where fastboot and the twrp.blob file are and you will see a context menu. Click on "Open Command Window Here"
In the command window paste:
fastboot -i 0x0b05 flash recovery twrp.blob
and hit enter
...
Click to expand...
Click to collapse
Yes, just open CMD and "cd" your way to the directory. Just make sure you end up inside the directory (ie. "...\UBTv1.3.2>")
ramez75 said:
Hi again,
Ok so i got the correct TWRP.blob and I changed its name and put it in the folder with fastboot.exe. i plugged in my tf201 to my laptop followed the power volume sequence. I held the shift and right clicked on the folder but i didnt see "Open command window here". So how do i got about that. Do i use the "cmd" in the run from start to open the black dos screen and change directory (cd..) till i get to the folder that has the fastboot.exe
Thanks
Click to expand...
Click to collapse
Followed all the instructions and seemed all were successfull. I see a Superuse icon created. What do you mean by ADB? and what will yield root when I type?, where do I type?. I dont understand the last sentence, please can you empahsize on it
Thanks again
hx4700 Killer said:
ADB will now yield Root when you type: SU root and hit enter (grant root privs in the popup)etc...
Click to expand...
Click to collapse
ramez75 said:
Followed all the instructions and seemed all were successfull. I see a Superuse icon created. What do you mean by ADB? and what will yield root when I type?, where do I type?. I dont understand the last sentence, please can you empahsize on it
Thanks again
Click to expand...
Click to collapse
Lol, guess I didnt include one of those in the downloads. After flashing TWRP I assume you "Installed" the superuser zip? This is what roots the device.
I got ADB from several sources but this "root method" http://forum.xda-developers.com/showthread.php?t=1886460 from bin4ry is what I have been using: (And no, it doesnt work for the prime because the exploit he uses to run the device in emulator mode doesnt work for us)
http://ul.to/xdevcthz
Your tab must be plugged in to the USB port of the computer of course.
Download the ZIP file and decompress. Use CMD to change directory to the unzipped folder and further in to the "STUFF" folder. type:
adb shell
<hit enter>
after a few seconds you should see a $ prompt and your are in to the console of your tablet.
Type:
su root
<hit enter>
Superuser will prompt you to grant root permissions and I set the setting so it doesnt prompt me every time.
Your prompt will change to # and thats it, you are root.
I don't seem to have the sudo on my tab so every time in a terminal I want root I will type that su root to get the # prompt.
Any apps that need root can now ask for it, you will get that same "Grant" prompt and do so if that is what you want.
Adding:
i just remembered that you said you downloaded the android SDK. ADB is in amongst those files as well.
By the i still didnt follow the below instructions but it seems i am already rooted because i was able to download titanium backup. So what will the below steps give me more.
Also how do i get rid of apps like Amazon kindle??.....
Below you say that you used the method from binary but you also say it doesnt wok with the prime. So i presume tf201 is the prime, so i still follow the below right
hx4700 Killer said:
Lol, guess I didnt include one of those in the downloads. After flashing TWRP I assume you "Installed" the superuser zip? This is what roots the device.
I got ADB from several sources but this "root method" http://forum.xda-developers.com/showthread.php?t=1886460 from bin4ry is what I have been using: (And no, it doesnt work for the prime because the exploit he uses to run the device in emulator mode doesnt work for us)
http://ul.to/xdevcthz
Your tab must be plugged in to the USB port of the computer of course.
Download the ZIP file and decompress. Use CMD to change directory to the unzipped folder and further in to the "STUFF" folder. type:
adb shell
<hit enter>
after a few seconds you should see a $ prompt and your are in to the console of your tablet.
Type:
su root
<hit enter>
Superuser will prompt you to grant root permissions and I set the setting so it doesnt prompt me every time.
Your prompt will change to # and thats it, you are root.
I don't seem to have the sudo on my tab so every time in a terminal I want root I will type that su root to get the # prompt.
Any apps that need root can now ask for it, you will get that same "Grant" prompt and do so if that is what you want.
Adding:
i just remembered that you said you downloaded the android SDK. ADB is in amongst those files as well.
Click to expand...
Click to collapse
ramez75 said:
By the i still didnt follow the below instructions but it seems i am already rooted because i was able to download titanium backup. So what will the below steps give me more.
Also how do i get rid of apps like Amazon kindle??.....
Below you say that you used the method from binary but you also say it doesnt wok with the prime. So i presume tf201 is the prime, so i still follow the below right
Click to expand...
Click to collapse
What I meant was I use ADB from that root method from bin4ry. He includes ADB.EXE and needed DLL files so its a quick one stop shop for ADB.
Does the adb shell command give you anything? No its just proves root is available. Rootcheckers can also do it. ADB is just a way in to your device from a desktop machine.
I have never removed an APP but I believe removing its APK file from /system/app folder allows it to be removed or does remove it. ( i would save it somewhere in case you need/want it back)
Thank you for an easy to follow way to root a 4.1.1 JB OTA TF-201. It worked exactly as you described.
You may want to let some of the noob users know what in each zip file they need. It really helps if all the files you download are in one location unless you are familiar the windows command line.
Hi all,
EDIT
Thanks to techdudester on the second page, getting rid of the malware is now even easier!
Just flash the image he found here with the following procedure and you're good to go!
Instruction:
1. Flash the new ROM.
a. Get the ROM here . (Use this ROM only if you have a Venstar V140D tablet!)
b. Follow the linked tutorial to install the flash software and flash the new ROM on your device with: Phoenix Suit.
Voila, ready!
Enjoy your malware free tablet!
Tips and tricks. (or something...)
Get adb working (needed for all the other tricks down below):
1. Download the Google development tools (sdk) here and install them on your computer. I assume you have windows 7 installed during the rest of this tutorial.
2. Connect your device to your computer and make sure it is installed correctly.
a. Connect your device while its powered on via USB to your pc.
b. Go to Start, right click "My Computer" and select "Properties". Click "Device Manager".
c. Right click the Android device with the exclamation mark and select "Update Driver Software...".
d. Select "Browse my computer for driver software".
e. Select "Let me pick from a list of device drivers on my computer".
f. Keep "Show All Devices" selected and click Next.
g. Click "Have Disk..." and click "Browse..."
h. You can find the drivers in the "SDKInstallLocation"\sdk\extras\google\usb_driver directory and click OK. Replace SDKInstallLocation with the location that you selected during installation of the SDK.
i. Select the "Android ADB Interface" driver from the list and click Next.
j. Confirm installation by clicking on "Yes". Sometimes you also have to click on "Install" if a screen pops up to ask you again if you really want to install the driver...
k. Click "Close".
To use it:
Open a command prompt (in search type "cmd" followed by ENTER) and go to the following directory ""SDKInstallLocation"\sdk\platform-tools".
If you want a backup of your tablets system directory (highly recommended!) use:
"adb pull /system C:\system"
where C:\system is the target location on your local computer where you want the backup of the system directory.
Remove the update package (this doesn't work for updating the tablet, so, useless.)
adb remount
adb shell
cd system/app
rm Update.apk
exit
Remove the unwanted apps (dragonfire.apk etc)
adb remount
adb shell
cd system/preinstall
rm *
exit
If you would like to have your tablet in the correct time zone after factory reset, you will have to adjust the build.prop file.
First you need to get it to your pc so you can edit it:
in the command prompt window and at the same location as in the tutorial above type "adb pull /system/build.prop C:\temp\build.prop".
Just in case, make a copy of the build.prop in Windows Explorer so you always have the original file if something goes wrong.
Now you can edit the build.prop, but DON'T EDIT IT WITH THE WINDOWS NOTEPAD! Use Notepad++ or similar to edit the build.prop.
After you made the changes (and be careful here, you could end up with a tablet that does not want to boot up, solution further down below) you have to upload the file back to your tablet.
in the command prompt type:
adb remount
adb push C:\temp\build.prop /system/build.prop
adb shell chmod 644 /system/build.prop
Don't forget the last line! If you do not chmod the file (set the correct permissions) your tablet will not boot up.
Changes in the build.prop:
Time zone:
Default time zone is "persist.sys.timezone=Europe/London"
you can change this to your locale time zone like "persist.sys.timezone=Europe/Amsterdam" (for the netherlands )
Search the internet for valid time zones.
Change the default language:
The default language is determined by these two values in the build.prop:
persist.sys.language=en
persist.sys.country=US
For dutch change them to:
persist.sys.language=nl
persist.sys.country=NL
and again, search the internet for valid language values.
Higher brightness after factory reset:
Add the following line to the build.prop file (at the top of the file)
ro.ph.def_brightness=225
You pushed the build.prop without changing the permissions:
No problem. Just connect your booting tablet to the PC, install the driver if its not installed correctly like explained in the tutorial, and then change the rights via adb. It's no problem that it's not fully booted!
in a command prompt in the adb directory:
adb remount
adb shell chmod 644 /system/build.prop
adb reboot
If you pushed a wrong non functioning build.prop, just use this method to push the original build.prop (you know, the copy you made ) back to the device (followed by setting the correct permissions of course).
Remove the (in my opinion) irritating boot sound:
adb remount
adb shell
cd system/media
rm boot.wav
exit
rom download
can you provide another way to download the rom file ,i cant seem to get the registration process to work
stevethesignguy865 said:
can you provide another way to download the rom file ,i cant seem to get the registration process to work
Click to expand...
Click to collapse
I have dropped it here. Hope this helps
I bought the same tablet for my daughter. She's (and so am I) suffering from a lot of annoying popups and ads.
Thanks for sharing your instructions here, very hard to find them!
Since I'm a complete newbie: one important question. When you flash the ROM, all of the apps (games) will be removed I guess?
Second question: can you put the stock rom on a different location? Both of the links (including Filedropper) don't contain any files...
Thanks!
1ce/ said:
I bought the same tablet for my daughter. She's (and so am I) suffering from a lot of annoying popups and ads.
Thanks for sharing your instructions here, very hard to find them!
Since I'm a complete newbie: one important question. When you flash the ROM, all of the apps (games) will be removed I guess?
Second question: can you put the stock rom on a different location? Both of the links (including Filedropper) don't contain any files...
Thanks!
Click to expand...
Click to collapse
Yes, all applications will be removed. As soon as you configure the tablet again with the same gmail account, it will probably start installing the applications and games automatically, but in game progress will be lost for most (not online) games.
I am re-uploading the file. Will update this post with the link as soon as it finishes
edit: upload finished, get it while its there LINK
BlueFlame said:
edit: upload finished, get it while its there LINK
Click to expand...
Click to collapse
Great! Thanks for the swift response. The file is about 307 MB. Is this correct? I'll start working on it, probably this weekend. I'll keep you posted.
1ce/ said:
Great! Thanks for the swift response. The file is about 307 MB. Is this correct? I'll start working on it, probably this weekend. I'll keep you posted.
Click to expand...
Click to collapse
Yes, thats correct. Once unpacked it will be around 520 MB.
Good luck!
Hi BlueFlame,
Thanks for the post. Is it possible to get the image uploaded again? Would be much appreciated.
Maylar said:
Hi BlueFlame,
Thanks for the post. Is it possible to get the image uploaded again? Would be much appreciated.
Click to expand...
Click to collapse
On request. You can find it here. (Adjusted link. Stored on Google Drive)
Thanking you. Very much appreciated.
Thank's for a fantastic procedure... Worked very well.
First step doesn't work for me: Phoenixsuit gives an error: 'Open Firmware failed'
with three possible reasons:
- firmware version is too old
- firmware format is broken
- firmware is used by other application.
Version used: 1.0.6
Firmware file: a33_599x_v11_1024x600_gc0308_2035_1015a.img
Any ideas?
1ce/ said:
First step doesn't work for me: Phoenixsuit gives an error: 'Open Firmware failed'
with three possible reasons:
- firmware version is too old
- firmware format is broken
- firmware is used by other application.
Version used: 1.0.6
Firmware file: a33_599x_v11_1024x600_gc0308_2035_1015a.img
Any ideas?
Click to expand...
Click to collapse
Is that the firmware that I provided?
If not, try to download it again.
If so, I think that your tablet has a newer firmware than this one. You could contact the seller of your tablet for the current (latest) firmware for this tablet.
If you get a newer firmware, please share
Image file invalid
Hi Blueflame,
I've tried to re-flash, but at some point i'm getting the message at livesuit V1.11 that the image file is invalid.
It's the 3rd time i have downloaded the file, what could be cause of this error?
Greetz Mike
mcwheelz said:
Hi Blueflame,
I've tried to re-flash, but at some point i'm getting the message at livesuit V1.11 that the image file is invalid.
It's the 3rd time i have downloaded the file, what could be cause of this error?
Greetz Mike
Click to expand...
Click to collapse
Not sure. Will upload it again this weekend just to be sure that it's not my uploaded image. (I will let you know once I've done that)
You can, on the other hand, contact the supplier (where you bought the tablet) and ask them for the latest version of the ROM. I would also be interested in that
BlueFlame said:
Not sure. Will upload it again this weekend just to be sure that it's not my uploaded image. (I will let you know once I've done that)
You can, on the other hand, contact the supplier (where you bought the tablet) and ask them for the latest version of the ROM. I would also be interested in that
Click to expand...
Click to collapse
Uploaded again! same link (just made it a new version in Google Drive).
Open Firmware failed - possible solution
1ce/ said:
First step doesn't work for me: Phoenixsuit gives an error: 'Open Firmware failed'
with three possible reasons:
- firmware version is too old
- firmware format is broken
- firmware is used by other application.
Version used: 1.0.6
Firmware file: a33_599x_v11_1024x600_gc0308_2035_1015a.img
Any ideas?
Click to expand...
Click to collapse
Try to put the image file in a directory without special characters (i.e. c:\temp). Worked for me.
wundabua
Te real FIX is In!
Ok, i have one of these allwinner, Venstar, "whatever", A33 D140v tablets. It had all the usual problems and more, because the first thing I tried, was to use the built in recovery to "restore to factory". This made things even worse, because after the recovery, I couldn't reach the Google authentication servers.
I am pro tech with 25 years in the trenches and I have to admit this thing really threw me for a loop, because I spent an entire day researching the solution, installing Android SDK, drivers, Phoenix Suit, Live Suit, etc. These were all very complicated "solutions" that took me exactly nowhere. I finally found the answer in a rather stupid Youtube video.
The REAL answer is actually very quick and easy compared to all these other recommended methods.
In the first place, model V140d image is only used for these infected tablets. The actual model is V11 and once you use the quick restore method I discovered, you will have a malware free V11 model. The whole secret to this method, is the fact that these units were designed to be quickly, automatically and completely restored in less that 5 minutes through the use of their built in micro SD slot.
Imagine that!
If you check your tablet that came new in the box as something other than V140d, the method I used will most probably not work for you.
Anyway, the quick method I discovered, can be seen on my own tech support site. To find it, Google: Just Call Techdude
Then click on the support link at the top of the page on my site and all will be revealed.
techdudester said:
Ok, i have one of these allwinner, Venstar, "whatever", A33 D140v tablets. It had all the usual problems and more, because the first thing I tried, was to use the built in recovery to "restore to factory". This made things even worse, because after the recovery, I couldn't reach the Google authentication servers.
I am pro tech with 25 years in the trenches and I have to admit this thing really threw me for a loop, because I spent an entire day researching the solution, installing Android SDK, drivers, Phoenix Suit, Live Suit, etc. These were all very complicated "solutions" that took me exactly nowhere. I finally found the answer in a rather stupid Youtube video.
Click to expand...
Click to collapse
Hi techdudester,
The combination "pro tech with 25 years in the trenches" and "very complicated "solutions"" sounds a bit strange.
But either way, a THANK YOU is in order!
The ROM you found works on my tablet (flashed yesterday) and so far so good. No popups and no unwanted application downloads!
I will adjust my initial post to incorporate this image.
Drawing from the impressive work of CrashXXL in rooting our phones, jahrule in simplifying the process, and Sabissimo in developing a tutorial to bake in apps for those of us with locked bootloaders and write protected systems, I have with great effort arrived at this glorious day. I present to thee: Suicide Flash.
What is Suicide Flash? It is a collection of Bash scripts and other files which streamline and automate the process of using the Qualcomm emergency download mode (Qualcomm HS-USB QDLoader) to write to the system partition on Moto phones using MSM8960 processors. It applies the method used to root these devices (see here, for example) to the task of arbitrary system modification. In other words: Suicide Flash makes it easy(ish) to modify system files for those of us who can't use traditional methods.
Code:
DISCLAIMER: This is obviously a dangerous tool. I mean, it
flashes your phone by bricking it first. Be smart. I shan't be held
responsible if your phone melts, explodes, loses all of its data,
or cheats on you with a hula dancer.
Who Can Use It?
Suicide Flash is for sure compatible with most Moto X variants. The testing has been done primarily with an XT1049, the Republic Wireless model, but has also included the XT1060 (Verizon) and should work on most/all of them. However, in theory any phone, or at least any Moto phone, using the MSM8960 chip could be compatible, such as the Droid Turbo. So to simplify:
XT1049 (Moto X Republic Wireless): Tested and working
XT1060 (Moto X Verizon): Tested and working
XT1058 (Moto X AT&T): Untested, highly likely to work
XT10XX (Any other Moto X): Untested, likely to work
Others: Untested, may work as long as they use MSM8960
How Do I Use It?
Suicide Flash (SF) consists of three main scripts: a flashing script, a package creation script, and a pushing script. Details:
suicideflash.sh: Flashes SF packages to the phone in bricked (QDLoader) mode
pkgmaker.sh: For developers. Creates SF packages from system images.
suicidepush.sh: Uses the SF system to "push" system files in an ADB-like way
To use these scripts, simply extract them to a place of your convenience. All scripts must be run from the root Suicide Flash folder. Do not run any of them from within the "scripts" folder. Also, while it may not strictly be necessary, it is best (if you are developer) to include any relevant system images in the root Suicide Flash folder, as well.
As an end user, you can download SF packages created by developers and flash them using the main Suicide Flash script. As a developer, you can pull system images and use them to create SF packages with the pkgmaker.sh script. Anyone can feel free to use the Suicide Push script to push files to their device. For more information, here are the help pages for each.
Suicide Flash:
Code:
Usage: suicideflash.sh PACKAGE
Flashes PACKAGE to the system parition of a Moto phone using Qualcomm
emergency download mode.
Options:
-h, --help displays this help message
-s, --skip skips all prompts and runs without user interaction
Created by the Nicene Nerd, whose blog at <http://www.thenicenenerd.com/> has
absolutely nothing to do with Android
Package Maker:
Code:
Usage: pkgmaker.sh [OPTION]... ORIGINALSYSTEM TARGETDEVICE REQUIREMENTS
SYSTEMOFFSET OUTPUTFILE
Creates a Suicide Flash package for writing to Moto phones via the emergency
Qualcomm download mode.
Arguments:
ORIGINALSYSTEM provides the original system image to be modded
TARGETDEVICE specifies the model of phone for the package to flash
REQUIREMENTS notes any important requirements for the phone state
prior to flashing
examples: "Stock", "Rooted", or "Rooted+Xposed"
SYSTEMOFFSET the address of the system partition on the target device
should be in hex format (i.e. 0x6420000 or 6420000)
can use value ADB to pull the offset over ABD
OUTPUTFILE the name of the Suicide Flash zip package to be created
Options:
-h, --help returns this help message
-m MODDEDSYSTEM specifies an existing modded system image
if not given, will mount original for modification
Created by the Nicene Nerd, whose blog at <http://www.thenicenenerd.com/> has
absolutely nothing to do with Android
Suicide Push:
Code:
Usage: suicidepush.sh LOCALFILE REMOTEFILE
Uses Suicide Flash to push LOCALFILE to a phone system at REMOTEFILE.
Created by the Nicene Nerd, whose blog at <http://www.thenicenenerd.com/> has
absolutely nothing to do with Android
What Do I Need to Use It?
A Linux installation
ADB
Fastboot
Rhino
Python
A package called python-serial
VirtualBox
ADB Insecure (if developing or using Suicide Push)
If you don't have some of these (except, obviously, the first one and the last one), you can run the included script install-tools.sh. It will automatically install anything you're missing.
Okay, Give Me Step-By-Step Instructions
For End Users:
Download the attached Suicide Flash zip
Extract the zip to a convenient folder and open a terminal window there
Go ahead and use sudo su
Run install-tools.sh
Download an SF package from a developer for your device
Flash the package with the command:
Code:
./suicideflash.sh DOWNLOADEDPACKAGE.zip
Profit!
For Developers:
Download the attached Suicide Flash zip
Extract the zip to a convenient folder and open a terminal window there
Go ahead and use sudo su
Run install-tools.sh
Pull a system image from your phone
Run pkgmaker.sh to create an SF package
Upload the package for the benefit of others
For Anyone, to Use Suicide Push
Download the attached Suicide Flash zip
Extract the zip to a convenient folder and open a terminal window there
Go ahead and use sudo su
Run install-tools.sh
Push files to your phone's system partition with this command:
Code:
./suicidepush.sh LOCAL_SOURCE /system/PUSH_DESTINATION
So, What Can I Do with It Right Now?
If you're a developer, you can get to work creating SF packages for your device. If you're just a plain ol' user, there's not much to be done until others chip in. I have uploaded one package as a sample and for the convenience of anyone looking to root their XT1049 and install Xposed. I will maintain a master list of uploaded packages as people make them.
XDA:DevDB Information
Suicide Flash for Moto, Tool/Utility for the Moto X
Contributors
Nicene Nerd, CrashXXL, Sabissimo
Version Information
Status: Testing
Created 2015-08-07
Last Updated 2015-08-07
Master Package List
XT1049: Republic Wireless Moto X
- root-xposed-xt1049-4.4.4.zip: Root and Xposed for XT1049. Requires stock 4.4.4 from SBF, not OTA.
- busybox-xt1049-rooted-xposed-4.4.4.zip: BusyBox for XT1049. Requires 4.4.4 rooted w/ Xposed.
XT1058: AT&T Moto X
- root-xt1058-4.4.4.zip: Root for XT1058 KitKat. Requires stock 4.4.4 from SBF, not OTA.
- xposed-xt1058-rooted-4.4.4.zip: Xposed for XT1058 KitKat. Requires rooted 4.4.4.
- root-xt1058-5.1.zip: Root for XT1058 Lollipop. Requires stock 5.1 from SBF, not OTA.
XT1060: Verizon Wireless Moto X
- root-xt1060-4.4.4.zip: Root for XT1060. Requires stock 4.4.4 from SBF, not OTA.
- xposed-xt1060-rooted-4.4.4.zip: Xposed for XT1060. Required rooted 4.4.4.
Changelogs:
08/07/2015 - v0.2
- suicideflash.sh: Increased wait period before giving error on not finding phone in emergency mode
- mountimg.sh: Fixed issue which would cause errors preventing images from mounting
- pkgmaker.sh: Added option to pull system image over ADB, improved error handling
Developer pkgmaker.sh Tutorial: Creating an Xposed Framework Package
Say you want to make a package that installs the Xposed framework, since that requires writing to /system. Here's how you would do it with Suicide Flash (assuming you have already rooted the phone):
Open a terminal window to your Suicide Flash root folder. Then sudo su.
Pull a system image. One way to do that:
Code:
adb root
adb shell dd if=/dev/block/platform/msm_sdcc.1/by-name/system /sdcard/originalsystem.img bs=1024
adb pull /sdcard/originalsystem.img
Run the pkgmaker script like this, assuming you're using a rooted XT1049 on 4.4.4, but you don't know the offset of the system partition, so you want to pull it via ADB. The script will be placed in output/xposed-flash-package.zip.
Code:
./pkgmaker.sh originalsystem.img XT1049 "Stock 4.4.4" ADB xposed-flash-package.zip
The script will pause when originalsystem.img is mounted for writing. As root, copy the Xposed app_process file (which you can extract from the APK if you need it) to "mnt-originalsystem.img/bin/app_process". Then press enter.
The script will continue executing, hopefully without errors.
Voila! Your package xposed-flash-package.zip is ready to upload and/or flash.
Finally!
The XT1049 has stumped me for a long time, but finally someone found a way!
Just a thought as I'm going into this, there's no mention of drivers for linux. Obviously this isn't to "user" level yet, and I wouldn't put myself too much beyond that, but it's a nice thing to include. I'll be trying it later, but are the drivers for USB/ADB the same as the emergency mode drivers? I'm kind of nervous to try because of the soft brick, and there doesn't appear to be any mention of how the flashed file that bricks it is put back. I'm assuming I can pull the original image before I flash the new one, but I'm not sure yet.
Also, if you have it tested and everything with Republic, I would appreciate a torrent or hosted file somewhere. If there isn't one before I finish, I'll post it.
---------- Post added at 09:42 PM ---------- Previous post was at 09:38 PM ----------
Cindex said:
The XT1049 has stumped me for a long time, but finally someone found a way!
Just a thought as I'm going into this, there's no mention of drivers for linux. Obviously this isn't to "user" level yet, and I wouldn't put myself too much beyond that, but it's a nice thing to include. I'll be trying it later, but are the drivers for USB/ADB the same as the emergency mode drivers? I'm kind of nervous to try because of the soft brick, and there doesn't appear to be any mention of how the flashed file that bricks it is put back. I'm assuming I can pull the original image before I flash the new one, but I'm not sure yet.
Also, if you have it tested and everything with Republic, I would appreciate a torrent or hosted file somewhere. If there isn't one before I finish, I'll post it.
Click to expand...
Click to collapse
Sorry for the double post but I can't edit yet, just realized that the zip file there is all that's needed for Republic. I was going to post the ADB/USB driver setup link for linux, but I'm not allowed yet.
Cindex said:
The XT1049 has stumped me for a long time, but finally someone found a way!
Just a thought as I'm going into this, there's no mention of drivers for linux. Obviously this isn't to "user" level yet, and I wouldn't put myself too much beyond that, but it's a nice thing to include. I'll be trying it later, but are the drivers for USB/ADB the same as the emergency mode drivers? I'm kind of nervous to try because of the soft brick, and there doesn't appear to be any mention of how the flashed file that bricks it is put back. I'm assuming I can pull the original image before I flash the new one, but I'm not sure yet.
Click to expand...
Click to collapse
You shouldn't need to do anything special for Linux drivers. It works straightforwardly as long as you have fastboot and ADB. The flashed file that creates the softbrick is included by the package maker script in every Suicide Flash package, so it is easy to unbrick. In fact, I can upload another package just for unbricking if you'd like.
Added a BusyBox package for XT1049, and added root and Xposed packages for XT1060.
Edit: also added root packages for XT1058 on both KitKat and Lollipop, plus Xposed for XT1058 KitKat.
Nicene Nerd said:
You shouldn't need to do anything special for Linux drivers. It works straightforwardly as long as you have fastboot and ADB. The flashed file that creates the softbrick is included by the package maker script in every Suicide Flash package, so it is easy to unbrick. In fact, I can upload another package just for unbricking if you'd like.
Click to expand...
Click to collapse
That's good to know, I looked around and couldn't find anything on the driver for the Qualcomm Emergency Download mode. I suppose not needing one would be why. Actually some kind of emergency package to unbrick might be good. Now that I see the script in there I don't have a problem, but someone might like it.
So now I'm wondering if I actually have to do a factory reset again, or if I can just flash the SBF file itself and not have to wipe. I'm not sure how big of a difference there is, because I did the factory restore recently and the OTA update was like 6MB or something. I wouldn't think there's be an issue flashing it rather than factory restore. Any ideas?
Also, if anyone knows a good way to do this with Virtualbox it would be a nice addition. I'm personally not going to bother since I already have a bootable Ubuntu USB, but it seems that most people would rather set up a VM with a small linux distro. If it had the tools baked in, it would make it an easy process.
Cindex said:
That's good to know, I looked around and couldn't find anything on the driver for the Qualcomm Emergency Download mode. I suppose not needing one would be why. Actually some kind of emergency package to unbrick might be good. Now that I see the script in there I don't have a problem, but someone might like it.
So now I'm wondering if I actually have to do a factory reset again, or if I can just flash the SBF file itself and not have to wipe. I'm not sure how big of a difference there is, because I did the factory restore recently and the OTA update was like 6MB or something. I wouldn't think there's be an issue flashing it rather than factory restore. Any ideas?
Also, if anyone knows a good way to do this with Virtualbox it would be a nice addition. I'm personally not going to bother since I already have a bootable Ubuntu USB, but it seems that most people would rather set up a VM with a small linux distro. If it had the tools baked in, it would make it an easy process.
Click to expand...
Click to collapse
Technically, the only reason for the SBF is because when you install OTA updates, files may end up in slightly different positions depending on the circumstances. For this to work, you must start with an identical system partition to the one used for making the package. So all you need to really do is extract the system.img and flash it, if you wish. No data loss necessary.
Also, I'll look into a minimal VM. I thought about actually trying to make a Windows version of Suicide Flash. I'm not sure which I'll end up with.
So I tried this on my Ubuntu 12.04.5 last night, and it didn't recognize the device in fastboot. I'm going to try on Ubuntu 15.04 soon here. Another question for you though, which sdk do I use for XPosed? I don't seem to be able to figure it out searching all over. I would think 16, but maybe it's for Lollipop?
I think I'm going to get some of these with the OTA, it'll make it easier for the average Republic user once it's gotten going.
Cindex said:
So I tried this on my Ubuntu 12.04.5 last night, and it didn't recognize the device in fastboot. I'm going to try on Ubuntu 15.04 soon here. Another question for you though, which sdk do I use for XPosed? I don't seem to be able to figure it out searching all over. I would think 16, but maybe it's for Lollipop?
I think I'm going to get some of these with the OTA, it'll make it easier for the average Republic user once it's gotten going.
Click to expand...
Click to collapse
I can't answer your Xposed Lollipop question. I was wondering the same thing, but I ended up simply pulling the file from an existing Xposed installation. I suppose you could do the same and then diff the files to find out which is correct.
As for the OTA, that's not possible. Every time an OTA is installed, the files can end up in different places on the flash memory, and this utility requires knowing the exact locations for making changes. You'd have to make separate packages for every phone. Otherwise you'll end up with bootloops.
Has anyone tried using Suicide Push? It's slow, but I thought it would be the more celebrated part of this since it lets you do basically the same as an ADB push to the system partition. You could even install Xposed that way:
Code:
./suicidepush.sh local_app_process_file /system/bin/app_process
Nicene Nerd said:
Has anyone tried using Suicide Push? It's slow, but I thought it would be the more celebrated part of this since it lets you do basically the same as an ADB push to the system partition. You could even install Xposed that way:
Code:
./suicidepush.sh local_app_process_file /system/bin/app_process
Click to expand...
Click to collapse
I'm still working on getting it to root. I was going to a few days ago, but my flash drive burned out. I'm going to try Ubuntu 14.04.3.
What linux distro did you use?
---------- Post added 14th August 2015 at 12:41 AM ---------- Previous post was 13th August 2015 at 11:47 PM ----------
Sorry to double post again, but I can't edit yet and have a few more things. I can't seem to be able to find a RW SBF file. I'm thinking restore from factory sounds like a good solution, but I don't know if that's the same thing.
How can I pull a system image if I'm not root? Without an SBF file, I need to package it for myself. Without root, I can't pull the system.img. I'm sure others on networks not covered yet would like to know also. Where did you get your system.img?
Also, if we can get this deep, and you can modify the bootloader, couldn't you just flash the old bootloader image and then the rest of the ROM? Then we could unlock the bootloader using older methods. We might have to flash block by block, but it should work?
Cindex said:
I'm still working on getting it to root. I was going to a few days ago, but my flash drive burned out. I'm going to try Ubuntu 14.04.3.
What linux distro did you use?
---------- Post added 14th August 2015 at 12:41 AM ---------- Previous post was 13th August 2015 at 11:47 PM ----------
Sorry to double post again, but I can't edit yet and have a few more things. I can't seem to be able to find a RW SBF file. I'm thinking restore from factory sounds like a good solution, but I don't know if that's the same thing.
How can I pull a system image if I'm not root? Without an SBF file, I need to package it for myself. Without root, I can't pull the system.img. I'm sure others on networks not covered yet would like to know also. Where did you get your system.img?
Also, if we can get this deep, and you can modify the bootloader, couldn't you just flash the old bootloader image and then the rest of the ROM? Then we could unlock the bootloader using older methods. We might have to flash block by block, but it should work?
Click to expand...
Click to collapse
I used Ubuntu 14.04.
The RW 4.4.4 SBF can be found here or here. It does not appear possible to pull a system image without root. But even without permanent root, KingRoot can get you temp root long enough to pull a system image.
As for the bootloader, there's certainly a chance that this could be done. It's just so risky that I won't try it myself. If there was a single variable missed, it could easily mean hard-brick. But in theory, as far as I understand, it might work. The biggest obstacle might be partition changes. If you got the bootloader to get into fastboot mode, though, you could presumably fix that with an old SBF.
Flashing the olderer bootloader will not work (I have tried and confirmed it does not work). It is because the efuses verify the bootloader.
Wow! That's hell of a tool you've created here Awesome job! I haven't tried it myself yet, but, judging by source code, it should get the work done. More of a developer tool, ofc, but it's more then impressive Maaan, I wish there was a normal way to work with ext4 partitions to make it available on Windows))
Since you've made "push" version of it (and that's the most interesting part, longest though), the next step in future development should be doing the same with TWRP flashable zips. Some of them just put apk-s in system folder, some of them have shell scripts inside, I've yet to figure out the pattern But that would be awesome next step to this awesome project
download link not found )
theres a tool bar at top crash with download links next to discussions and screenshots
Sabissimo said:
Wow! That's hell of a tool you've created here Awesome job! I haven't tried it myself yet, but, judging by source code, it should get the work done. More of a developer tool, ofc, but it's more then impressive Maaan, I wish there was a normal way to work with ext4 partitions to make it available on Windows))
Since you've made "push" version of it (and that's the most interesting part, longest though), the next step in future development should be doing the same with TWRP flashable zips. Some of them just put apk-s in system folder, some of them have shell scripts inside, I've yet to figure out the pattern But that would be awesome next step to this awesome project
Click to expand...
Click to collapse
I've actually started work on a Windows version, but it's on back burner because school just started. Here's a hint, though: with OSFMount and Ext2Fsd, you can mount Moto system images (pulled from the phone, not SBF ones) as hard drives or removable disks. Suicide Flash for Windows will rely on them.
So what are the chances I could use this to pull a system.img, and actually go in and delete some apps out of my XT1058? I had some success but it pulled the image as a mbn and I'm hesitant to try flashing it.
lpjunior999 said:
So what are the chances I could use this to pull a system.img, and actually go in and delete some apps out of my XT1058? I had some success but it pulled the image as a mbn and I'm hesitant to try flashing it.
Click to expand...
Click to collapse
Here's what you'll want to do:
Create the system image on the phone with
Code:
dd if=/dev/block/platform/msm_sdcc.1/by-name/system of=/sdcard/oldsystem.img bs=1024
ADB pull or MTP copy the image to your PC.
Run pkgmaker.sh like so:
Code:
./pkgmaker.sh oldsystem.img XT1058 "My System" 4B000000 modded-system.zip
When prompted, you can delete apps as root from the mounted system image under mnt-oldsystem.img/app or mnt-oldsystem.img/priv-app
Continue and finish the script.
Flash with
Code:
./suicideflash.sh -s output/modded-system.zip
Hello Fire users
I am not really a newbie but until today I have worked only with Samsung devices.
My daughter got an Fire HD 6 in the christmas days and we started to play around and we have done all updates up to 5.3.1.1. But it's not running perfectly for my wishes. I have read thats it's possible to root the tablet incl. TWRP, xposed framework and go with this up to 5.3.1.1 but it's hard to read out what I have exactly to do because there are many warnings when to do something and when not.
Could you please help what to do exactly? ADB is running and phone is recognizing on Mac and Windows...
Thanks for your help ?
cuki3r3k83bln said:
Hello Fire users
I am not really a newbie but until today I have worked only with Samsung devices.
My daughter got an Fire HD 6 in the christmas days and we started to play around and we have done all updates up to 5.3.1.1. But it's not running perfectly for my wishes. I have read thats it's possible to root the tablet incl. TWRP, xposed framework and go with this up to 5.3.1.1 but it's hard to read out what I have exactly to do because there are many warnings when to do something and when not.
Could you please help what to do exactly? ADB is running and phone is recognizing on Mac and Windows...
Thanks for your help
Click to expand...
Click to collapse
From latest news, OS 5.3.1 can't be rooted(directly). You'll need to downgrade to 4.5.3, root, and go back to 5.3.1 as explained here
If you want to feel android experience, you can either install custom launcher and Play Store from here or just totally install Cyanogenmod 11 from here
Killa8 said:
From latest news, OS 5.3.1 can't be rooted(directly). You'll need to downgrade to 4.5.3, root, and go back to 5.3.1 as explained here
If you want to feel android experience, you can either install custom launcher and Play Store from here or just totally install Cyanogenmod 11 from here
Click to expand...
Click to collapse
@Killa8, as I mentioned HERE in more detail, the procedure for downgrading to 4.5.3 doesn't appear to be explained in the linked tutorial. Any help would be greatly appreciated! I'm trying to root and install CM on my daughter's tablets as they find Android to be far more intuitive than FireOS. Many thanks!!!
Downgrade to 4.5.3 and root as seen here (skip step 1): https://forum.xda-developers.com/fire-hd/general/how-to-downgrade-to-4-5-3-root-device-t3139351
Jump down to the 2nd post here: https://forum.xda-developers.com/fire-hd/general/how-to-upgrade-to-lollipop-root-gapps-t3163950 and install TWRP on your device.
Then go to post 1 where it says "1) boot into TWRP, and, in a single session (!!!!!)" and follow the directions. MAKE SURE YOU USE THE RIGHT BOOTLOADERS!!
Enjoy rooted FireOS 5.3.1
RadRacer said:
Downgrade to 4.5.3 and root as seen here (skip step 1): https://forum.xda-developers.com/fire-hd/general/how-to-downgrade-to-4-5-3-root-device-t3139351
Jump down to the 2nd post here: https://forum.xda-developers.com/fire-hd/general/how-to-upgrade-to-lollipop-root-gapps-t3163950 and install TWRP on your device.
Then go to post 1 where it says "1) boot into TWRP, and, in a single session (!!!!!)" and follow the directions. MAKE SURE YOU USE THE RIGHT BOOTLOADERS!!
Enjoy rooted FireOS 5.3.1
Click to expand...
Click to collapse
Thank you for this! I was having the same issue as the OP and this solved it.:good:
geoyou said:
Thank you for this! I was having the same issue as the OP and this solved it.:good:
Click to expand...
Click to collapse
Can you tell me how you installed TWRP? the 2nd post of the page is confusing to me.
NVM i found a video tutorial
I've seen too many threads mentioning 5.3.1 and implying that 5.3.1.1 is the same.
Even if that is the case, all the tutorials I have read left me scratching my head at various points. So here is a walkthrough of what I just went through to root my Kindle fire HD 6
It's now running 5.3.1.0 and will stay there for the time being (unless I can get solid answers on 5.3.1.1).
I started with this tutorial thread but I found it easy to make mistakes and I ended up bricking my device (fortunately the unbrick iso is very good and the tutorial video is excellent).
So here is my procedure. Doing this on Windows is probably less involved thanks to the bat file in one of the steps.
Start by getting the stuff you will need together.
You will need ROMs from here.
Specifically, the 4.5.3 and 5.3.1.0 ROMs.
The 4.5.3 file name is update-kindle-20.4.5.3_user_453011120.bin
The 5.3.1.0 file name is update-kindle-20.5.5.2_user_552153420.bin
Note: The version number on that second file makes no sense to me, and I made a mistake trying to flash the wrong one in TWRP. Here is the correct name for reference. You might change the file names to reflect the version number.
Go ahead and change the extension of the 5.3.1.0 bin file to zip instead. TWRP will need it this way.
Download the stock recovery image. There is a link at the bottom of the second post in the tutorial thread I linked above. Or you can just click here.
Grab the WindowsAutoTWRP_v03.zip from the tutorial thread (or click here).
It has the Windows ADB executable and drivers in it so it will save you some hassle on a Windows machine.
For Macs, I found a video from RootJunkie.com that linked to tools at http://rootjunkysdl.com/files/?dir=Adb%20Fastboot%20Files. I was able to do everything from my Mac with these.
As a side note, the video I found these on was https://www.youtube.com/watch?v=iv0VcNM8IAw, but it's not important to watch.
It will help to gather zips and APK files you will need right now as well.
Get a copy of ES file explorer, Kingroot (I used the APK, but if you have a windows system, it might be easier to use the Windows version instead), and an android launcher of some sort.
For additional images, you will need the following:
From the tutorial thread: make_space_v02.zip
Supersu.zip linked at https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
Xposed which if you follow the link from the tutorial through the forum thread should lead you here: http://dl-xda.xposed.info/framework/sdk22/arm/. I grabbed xposed-v87-sdk22-arm.zip
flash Pico (Uni) GAPPS for 5.1 which again, if you follow all the links, will take you here: https://basketbuild.com/filedl/devs?dev=osm0sis&dl=osm0sis/gapps/tk_gapps-modular-pico%28uni%29-5.1.1-20150920-signed.zip.
Make sure you have all the files gathered in one place, it's really helpful.
If you are using a Mac, you will also need Android File Transfer at https://www.android.com/filetransfer/.
Something optional that might help is a USB OTG cable or one of those USB drives that support USB OTG with its own micro USB connector. It's not necessary but it might help if you need to get files to your tablet in TWRP.
At this point, I'm going to go into Mac instruction mode. If you know that the Windows command prompt is sort of like the terminal application on OS X, that you don't use ./ path specifies on windows, etc, you should be able to come up with some
Once you have everything in place, shut down your Kindle Fire 6.
On your computer, open a terminal window and get to where you unzipped your ADB tools.
The simple way is to type cd followed by a space then drag the folder with your tools from finder to the terminal widow so you get something like cd /users/me/abd
The actual path will be dependent on your system.
This terminal window should remain open for the entire process. It will make life easier.
Hold volume up and turn the Kindle Fire on. You should enter recovery.
Back at your computer type ./adb devices
Your kindle should show up there. When it does, go back to your tablet and select "apply update from ADB".
Then, from the terminal, enter ./adb sideload 4.5.3 file name is update-kindle-20.4.5.3_user_453011120.bin
If you just type ./adb sideload then drag the file into the terminal window, it will fill the name and path out for you.
Note that this all seems kind of like the video I linked above but we are downgrading to 4.3.5 instead as the tutorial thread says we should.
Once that's done, you end up back at the recovery screen. I went ahead and did a wipe data/factory reset. I don't know if this is necessary though.
When you get into 4.5.3, you need to shut down wifi if you are not prompted through new device setup.
If you are prompted, just skip it.
You may need to enable debugging. Go to setting, device options, find the serial number field and tap it 7 times.
Open the now revealed developer console and toggle "enable ADB" so it's on.
Install the APKs you downloaded earlier.
Use ./adb install <name of ES file explorer apk>
If you're on Windows, you can go ahead and run the Windows root util.
If you are on a Mac, install the Kingroot APK using the ./adb install command.
If you go the APK route, Kingroot requires a wifi connection. This will expose you to Amazon's OTA updates. You will need to watch your Kindle carefully at this point.
The download with probably download but as long as you don't let it sleep, it should not reboot and install.
Kingroot may take a couple of tries to get root.
As soon as it does, turn off wifi!
After that, open ES file explorer, give it root permissions, then navigate to the root folder, then to cache. Look for a bin file there. If there is nothing, you didn't get the OTA update pushed to you. If you did, delete it. See post 5 in this thread: https://forum.xda-developers.com/kindle-fire-hdx/help/deleting-downloaded-update-t3100573
To prevent any OTA relapses until we can go further, use ES file explorer to rename /system/etc/security/otacerts.zip. I replaces the first o and last p with _ characters.
It should be safe to turn on wifi at this point.
If you deleted a bin file in /cache, you aren't out of the woods yet. The Kindle could still reboot on you and it will give you the red ! but I found booting into recovery then just rebooting the Kindle caused it to work itself out after a couple tries.
We should be good to go for TWRP at this point.
In the terminal type ./adb shell
When the shell opens type su
Grant the shell permissions on the Kindle
Type exit twice.
On a Mac, we cannot run the bat file included in the WindowsAutoTWRP_v03.zip file.
But here are the commands to enter manually:
./adb devices
./adb install gscript-android.apk
./adb shell "mkdir /sdcard/gscript"
./adb push gscript /sdcard/gscript/
./adb shell "cp /sdcard/gscript/flash_453_stay.sh /data/local/tmp/"
./adb shell "ls /data/local/tmp/"
./adb shell "su -c 'chmod 777 /data/local/tmp/flash_453_stay.sh'"
./adb shell "su -c 'sh /data/local/tmp/flash_453_stay.sh'"
Once complete open ES file explorer again
DELETE sdcard/gscripts/s5.4.1_113_stock_recovery_uboot.zip!!!!!!!
It's too easy to mistakenly flash this in TWRP and it WILL brick your kindle.
We will now copy those zip files we downloaded earlier onto the Kindle.
I used the Android file transfer unity to put them in the scripts folder but copying them to Downloads on the Kindle might be easier.
If you are a command line type of person, you can also use the adb push command.
You want to copy over the following:
The 5.3.1.0 file name is update-kindle-20.5.5.2_user_552153420.bin
5.5.2_1534_stock_recovery_uboot.zip
UPDATE-SuperSU-v2.46.zip (or whatever the current version you downloaded is)
make_space_v02.zip
xposed-v87-sdk22-arm.zip (or whatever the version you downloaded is. The version could have changed after I wrote this.)
tk_gapps-modular-pico(uni)-5.1.1-20150920-signed.zip (again, based on what version was available when you downloaded it)
It might be a good time to sideload that extra launcher you downloaded earlier. I didn't need it, but you might.
Again the command is ./adb install <apk file name>
In the terminal, type ./adb reboot recovery.
You *should* end up in TWRP.
These next steps are important to do in one go. Don't exit TWRP until you have installed all the zip files you copied over.
The order in the tutorial thread is the 5.3.1.0 system image, the recovery image, the make_space zip, the Supersu zip, the xposed zip, and the tk_gapps-modular-pico(uni)... zip.
Do all this from the Install menu in TWRP. I did not try to queue up all the zip files at once, I don't know if that would work.
If you forgot to copy a file, TWRP should allow you to copy files via a USB cable to your tablet.
If you do this on a Mac and Android file transfer craps out on you as it did with me, that is where the USB OTG cable comes in handy. But lets hope you copied everything or that the USB connection doesn't crap out on you.
Select the wipe menu, then advanced wipe. Check the cache and dalvik cache. Once done use the back arrow and swath the "swipe to factory reset" slider.
If you are brave, you can just reset and wait through the fire logo.
If you are trying to follow along with the tutorial I linked, reboot while holding volume up to see what recovery you land in. If it's not TWRP, proceed.
When you finally get to Android, you can use ES file explorer as one way to check for root privileges. I'm sure there are others.
I'm no expert, but if you run not problems with the Kindle Fire HD 6 (4th gen) and you started with 5.3.1.1, I can tell you some of the pitfalls I ran into and how I got out of them.
Excellent guide, thanks elementcarbon12!
I'm a total new comer to rooting and getting my hands dirty with android (although I am a long time linux user), and i made it work, and now have a fire hd 6 that I can sort the way I want it!
I did encounter a few problems though, first, I did not do a factory reset /data wipe after the downgrade and ended up in a boot loop. This was easily sorted by using the "adb reboot recovery" command, doing the data wipe/reset and then holding down power for 20 sec.
Everything was smooth sailing again until the reboot out of TWRP after installing the ZIP files. I did the wimps reboot to recovery to make sure I didn't get TWRP, which I didn't, so rebooted to get into android, however I entered a boot loop again. This time a simple hold the power for 20 sec and then turn on worked and the system started it's 'optimization'.
Upon completion, i still had root, although ES and my chosen launcher had gone, so had to reinstall them. No problems there though.
So thank you very much for collection all of the information and links from other pages into this one easy to follow post!
hi guys i have a question I'm on cm11 on fire hd 6 i also have a android backup of 4.5.3 my question is I'm note sure what boot loader i have at one point it did have 5xxx on it but not sure what version can i just side load 5.4.0 and be okay since the stock rom was put back to 4.5.3 thats how i installed cm11 or does it need boot loader from a 5xxx rom