I forgot to check the DA DL cheksum option while trying to flash a custom recovery. Now I am stuck with a boot loop having error message "Tool DL image fail". I have tried flashing the whole rom s226 but failed as I already updated to s227. Please help me out!!!
Hi, I noticed that the SP Flash tool version is very sensitive for flashing without errors.
I don't remember the exact version I used unfortunately, but it was the one from http://www.needrom.com/download/4-4-2-row-for-china-baseband-p780/ (you need to register and log in to view the download links, including the Flash tool).
You have to use version 3.X of the SP Tool (not 5.X), and with me, had same issue, but another minor minor version of the SP tool made all the difference. (I used 3.X.Y.Z and it was supposed to be 3.X.Y.A, where the letters are the numbers I forgot ).
I flashed 226 using SP Tools, with a version I still had on my PC. Got the "Tool DL image fail", even if I checked the DL checksum option.
Then flashed 226 with SP tool version of link, with checked the DL checksum option, and it worked.
Since I used the 226 version of the link, (ROW for CN models), it was rooted, and I then just upgraded to 227 through zip installation in recovery, and installed also the superuser.zip straight away to avoid loosing root. Worked out just fine.
Read the instructions on that link carefully, to make sure you have the correct model (ROW vs. CN) and manufacturing date (2013 vs. 2014) procedure.
casaben said:
Hi, I noticed that the SP Flash tool version is very sensitive for flashing without errors.
I don't remember the exact version I used unfortunately, but it was the one from http://www.needrom.com/download/4-4-2-row-for-china-baseband-p780/ (you need to register and log in to view the download links, including the Flash tool).
You have to use version 3.X of the SP Tool (not 5.X), and with me, had same issue, but another minor minor version of the SP tool made all the difference. (I used 3.X.Y.Z and it was supposed to be 3.X.Y.A, where the letters are the numbers I forgot ).
I flashed 226 using SP Tools, with a version I still had on my PC. Got the "Tool DL image fail", even if I checked the DL checksum option.
Then flashed 226 with SP tool version of link, with checked the DL checksum option, and it worked.
Since I used the 226 version of the link, (ROW for CN models), it was rooted, and I then just upgraded to 227 through zip installation in recovery, and installed also the superuser.zip straight away to avoid loosing root. Worked out just fine.
Read the instructions on that link carefully, to make sure you have the correct model (ROW vs. CN) and manufacturing date (2013 vs. 2014) procedure.
Click to expand...
Click to collapse
Look on my posts. You will find there the right flash tools.
Sent from my Lenovo P780 using XDA Free mobile app
Tool dl image fail
I tried to use android one tools kit for unlocking. When I clicked on unlock, it booted mobile, but again could not start. I used sp flash tool for flashing. When I clicked on download, all process completed but mobile could not start and displayed information "tool dl image fail". Please guide me how to resolve this.
Thanks
lenovoo.mobile2016 said:
I tried to use android one tools kit for unlocking. When I clicked on unlock, it booted mobile, but again could not start. I used sp flash tool for flashing. When I clicked on download, all process completed but mobile could not start and displayed information "tool dl image fail". Please guide me how to resolve this.
Thanks
Click to expand...
Click to collapse
Look on you phone box. See if there is writen something with 03.2014 or more date.
Or... Try to reflash with the new preloader. Before you try to flash press the small red button for 20 secconds.
Your preloader seems to be messed up right now.
Sent from my P780 using XDA-Developers mobile app
Manek88 said:
I forgot to check the DA DL cheksum option while trying to flash a custom recovery. Now I am stuck with a boot loop having error message "Tool DL image fail". I have tried flashing the whole rom s226 but failed as I already updated to s227. Please help me out!!!
Click to expand...
Click to collapse
Bro I am also having the same problem my phone displays tool do image fail and after some time it reboots again.and do this thing infinite times when I try to connect it to PC to flash a ROM it again reboots and resist the installing of any ROM.please helpp:crying::crying::crying:
[email protected] said:
Bro I am also having the same problem my phone displays tool do image fail and after some time it reboots again.and do this thing infinite times when I try to connect it to PC to flash a ROM it again reboots and resist the installing of any ROM.please helpp:crying::crying::crying:
Click to expand...
Click to collapse
Hi. Look what you have to do:
1. Prepare the phone for flash and plug the usb cable to pc and phone.
2. Open the back of your phone
3. There is a red button. Press this button for 20 secconds
4. While the button is still pressed, press on sp flash tool download or firmware upgrade button
5. After 20 secconds release the red button. Flashing should start.
6. Waiting for your feedback.
7. Good luck.
Send from my Lenovo P1 Vibe Pro
stympy said:
Hi. Look what you have to do:
1. Prepare the phone for flash and plug the usb cable to pc and phone.
2. Open the back of your phone
3. There is a red button. Press this button for 20 secconds
4. While the button is still pressed, press on sp flash tool download or firmware upgrade button
5. After 20 secconds release the red button. Flashing should start.
6. Waiting for your feedback.
7. Good luck.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
Thanks bro my phone is now repaired successfully.it rebooted .this phone was with me from 1 year in this state .it was not booting up and also the repair center told that the problem is of ic.
But thankfully it is now ok .
I don't know how to thank you .:highfive:
[email protected] said:
Thanks bro my phone is now repaired successfully.it rebooted .this phone was with me from 1 year in this state .it was not booting up and also the repair center told that the problem is of ic.
But thankfully it is now ok .
I don't know how to thank you .:highfive:
Click to expand...
Click to collapse
An simple thanks is enough. [emoji1]
You are welcome.
Send from my Lenovo P1 Vibe Pro
Can u please tell me that why when I try to flash ROM [Android m preview] the TWRP recovery says "error executing updater script in android m .zip".and the installation is aborted.
And when I try to reboot device it says "device is not rooted ",but I had rooted it.each time I install the ROM the same thing happens. Please help me I am in a big fix.
Sent from my Lenovo P1 using XDA Labs
[email protected] said:
Can u please tell me that why when I try to flash ROM [Android m preview] the TWRP recovery says "error executing updater script in android m .zip".and the installation is aborted.
And when I try to reboot device it says "device is not rooted ",but I had rooted it.each time I install the ROM the same thing happens. Please help me I am in a big fix.
Sent from my Lenovo P1 using XDA Labs
Click to expand...
Click to collapse
Hi.
Can you tell me what version of TWRP do you use and what firmware do you have right now?
If you have Jellybean firmware you must update to Kitkat.
Send from my Lenovo P1 Vibe Pro
stympy said:
Hi.
Can you tell me what version of TWRP do you use and what firmware do you have right now?
If you have Jellybean firmware you must update to Kitkat.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
Actually I have formatted the system,but before that I was having stock KitKat.
And I have TWRP v2.7.1.1 compiled by javum
Sent from my Lenovo P1 using XDA Labs
[email protected] said:
Actually I have formatted the system,but before that I was having stock KitKat.
And I have TWRP v2.7.1.1 compiled by javum
Sent from my Lenovo P1 using XDA Labs
Click to expand...
Click to collapse
Ok. Go to q&a section/rooting tutorial for kitkat and download latest TWRP. Flash from TWRP and try to flash again.
Soo many flash in one place...
Send from my Lenovo P1 Vibe Pro
stympy said:
Ok. Go to q&a section/rooting tutorial for kitkat and download latest TWRP. Flash from TWRP and try to flash again.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
Ok thanks.
Sent from my Lenovo P1 using XDA Labs
stympy said:
Ok. Go to q&a section/rooting tutorial for kitkat and download latest TWRP. Flash from TWRP and try to flash again.
Soo many flash in one place...
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
I did as directed by u but still encountered the same problem,
I tried MIUI ROM this it said :-
"Failed to copy dir system to /system
Error executing updater script from ......zip
Install aborted"
What to do now
Sent from my Lenovo P1 using XDA Labs
[email protected] said:
I did as directed by u but still encountered the same problem,
I tried MIUI ROM this it said :-
"Failed to copy dir system to /system
Error executing updater script from ......zip
Install aborted"
What to do now
Sent from my Lenovo P1 using XDA Labs
Click to expand...
Click to collapse
Hi. Try this:
1. Go to wipe/advance wipe.
2. Select all except micro sd card and otg
3. Swipe to wipe
4. Go to reboot and reboot to recovery
5. Go again to wipe and wipe to factory defaults
6. Now go to install and try to install again.
7. Good luck.
Send from my Lenovo P1 Vibe Pro
stympy said:
Hi. Try this:
1. Go to wipe/advance wipe.
2. Select all except micro sd card and otg
3. Swipe to wipe
4. Go to reboot and reboot to recovery
5. Go again to wipe and wipe to factory defaults
6. Now go to install and try to install again.
7. Good luck.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
Again the same error.
Also when I try to reboot system or reboot recovery it says "swipe to install SuperSU" and asks this each time I try to reboot
I think my phone is not able to mount system.its just my thinking
Sent from my Lenovo P1 using XDA Labs
[email protected] said:
Again the same error.
Also when I try to reboot system or reboot recovery it says "swipe to install SuperSU" and asks this each time I try to reboot
Sent from my Lenovo P1 using XDA Labs
Click to expand...
Click to collapse
Did you tried another firmware?
Maybe this one is corrupted.
Send from my Lenovo P1 Vibe Pro
stympy said:
Did you tried another firmware?
Maybe this one is corrupted.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
I tried 2 firmware but same error.
But I installed firmware successfully
I did this:-
1. Wiped everything except sd card .
2. Mount system
3. Go to install
4. Tried to install firmware
5. Got the error,rebooted system
6. Switched phone off from red button
7. Go to recovery
8. Mount system
9. Tried to install ROM,got error
10. Wiped dalvik cache and data
11.again installed ROM
12. Got successfully installed this time.
Sent from my Lenovo P1 using XDA Labs
Related
All Things Guide For Lenovo P780
What is Rooting ?Android rooting is the process of allowing users of smartphones, tablets, and other devices running the Android mobile operating system to attain privileged control (known as "root access") within Android's subsystem.
[Tutorial]
How to root.
WARNING:
• This will void your warranty.
• Do with your own risk.
credits to All Developers
1.Download Framaroot credits to XDA (http://www.mediafire.com/download/5q604sfl56asbfx/Framaroot-1.8.1.apk)
2. Install it on your phone.
3. Open it and choose Install SuperSu then press Boromir.
4. A message will be dispalyed stating Success
5. Reboot and Enjoy a rooted phone.
What is CWM (Clockworkmod)
Why do we need to install CWM ?
• This is where we can backup our files
• This is where we can install ROMs for our phones
WARNING :
• Do with your own risk.
• Need a Rooted Phone.
1. Download http://www.mediafire.com/download/37ail0o686u1qu8/recovery_P780_CWM_6.0.1.5.rar
2. copy it to your sd card
3. Extract and copy the recovery_P780_CWM_6.0.1.5.img to sd card
4. Install Mobile uncle tools 5. select update recovery6. select recovery_P780_CWM_6.0.1.5.img and update 7. you are done
8. You now have English CWM Recovery v6.0.1.5.
9. You can enter the recovery by turning off your phone, hold Vol.up+vol.down+power button, release after the phone power up.
Step by step guide to Flash stock rom:
1.If your phone is not already soft bricked, back up whatever you want. External SD card is fine. If your phone is soft-brick then say goodbye to your data and skip this step.
2. Uncompress all the files you downloaded from this thread into a directory where you can remember. Including the ROMs.
3.Shutdown your phone if its not in a bootloop. If it is skip this step.
4.Open "Device Manager" on your Windows PC.
5.Plug in your phone through the micro USB cable. A device will show up for a few seconds in "Device Manager". After that, it will disappear again!
6.Recognize the device tree where it appeared, and wait for it as you unplug and plug in your phone again (if bootloop, its automatic!)
7.Catch it with a right click as it appears! Then choose "Update Drivers" and pick the directory where you uncompressed the drivers you downloaded above. Its ok if after catching it the device disconnects. You only need to install the drivers now.
8.Assuming the drivers are correctly installed, run the Smart Phone Flash Tool.
9.Click on scatter-loading and choose the scatter file "MT6589_Android_scatter_emmc.txt" of the ROM you want to flash.
10.Make sure the checkbox "DL DA All With Check Sum" is CHECKED
11.Click on "Firmware->Upgrade" button.
12.Plug in your powered down phone via the USB cable again. See it flash.
13.When a big green circle appears on the screen, your are done!
Flash Tool
http://www.mediafire.com/download/lj7n6lfcj2bzg9o/FlashTool.zip
Drver
http://www.mediafire.com/download/11vk97208ab9pl0/MTK_USB__Driver.rar
By the way if anyone having trouble installing the driver, here is a tutorial: http://www.youtube.com/watch?v=dlYGfJM2BJ0
Stock ROM
STOCK ROM ROW123 4GB
https://docs.google.com/uc?id=0B5l5EfGG-gaaNUhnRFRoODNpaUk&export=download
STOCK ROM 4GB ROW123 OTA update
http://lenovo-forums.ru/Files/OS/P780/P780_ROW_S123_131231/update.zip
STOCK ROM ROW119 8GB
https://docs.google.com/uc?id=0ByFuurF7QLtkekVfekVfWmE4czA&export=download
STOCK ROM 8GB ROW123 OTA update
http://www.mediafire.com/download/71a55v6vfboc99e/P780_8GB_update.zip
LIST OF ROM
Samsung 4.2.2 rom ported for Lenovo P780
http://forum.xda-developers.com/lenovo-p780/development/lenovo-p780-4-2-2-custom-rom-t2617045
P780 Xperia Fusion Rom
http://forum.xda-developers.com/lenovo-p780/development/p780-xperia-fusion-rom-t2658127
Enjoy!
Gud work..
Can u tell me what Lenovo has changed from s119 to s123. Upgrade.
one question getting back to stock
hi
just one question if i want to get back to stock
is this what i do
1. flash the 119 8gb via flash too
2. then flash the OTA 123 via flash tool
im on the 123 stock right now
or do i just flash the 123OTA via flash tool
thanks in advance :good::laugh:
U need to flash 119 with sp flash tool and update via recovery
Sent from my Lenovo P780 using xda app-developers app
Additional information about the Lenovo P780 (some information might be duplicate),
This device is usually shipped in 2 software flavors
(In addition to the hardware flash being 4GB or 8GB):
1. Chinese based version - These ones are Lenovo software ROMs sXXX, sXXX, sXXX (to fill out)
2. Worldwide / English / ROW based version - These ones are Lenovo software ROMs, s119, s123.
I Saw a couple of posts online that identifies the different version of the device by the appearance of the battery markings (Though i'm not sure that these posts are right 100% of the time)
The partitioning of the EMMC is different between the 2, and as such, Images from one of the flavors cannot be flashed (using the FlashTool) onto the other(the images are just data, the structure that is incompatible is the scatter file). - You would probably get an error from the SP flash tool since your scatter file differs from the map that actually reside on the EMMC (Nothing would be flashed).
Please note that these problems only apply when flashing an image onto the device, and not using a script / existing file system (Recovery and .zip files are using the on-device file system to update roms, that should work regardless of the scatter/base)
Rebasing:
If you'd like, there might be an option to repartition the EMMC in order to cross-flash versions.
Note that there might be 'radio' issues accross different areas for as these roms might not designed to run in your region.
Preload mode - Flashing with SPFlashTool:
On the p780 There is no need to press any volume to access preload mode (I.E. Mode that is required for flashing using SPFlashTool) just hit 'download' and connect the usb to the device while powered off.
MTK VCOM Meta mode:
If u screwed up your Prealoder, Meta mode can be accessed and you can flash with SPFlashTool
Accessing meta mode is using VOL Down+power until u see on the PC "MTK VCOM Meta" or something similar.
SPFlashTool:
Both version 5.something and 3.something seem to work for me.
Dumping your own rom:
One thing I'v noticed is that if you dump your entire image (For example with MTKTools)
The preloader paratition outputted WHEN READING, differs from the input paratition file THAT IS AVALABLE ON DOWNLOADED ROMS.
Seems that when writing with the spFlashtool, address 0x0 is in fact 0x800 (ie, in the file you dump from your device there are extra 2048 bytes before the preloader paratition). If u'd like to flush a ROM you dump, be sure to check for this. It is very noticable that a downloaded rom prelaoder.bin differs from a dumped preloader.bin in the first 2048 bytes.
==
The above information was VERY VALUABLE to me when I received my phone, and this information weren't to be found anywhere gathered together.
problem flashing stock
Hi, I'v tried the above, but cant get the stock rom to flash:
ashoknraj said:
All Things Guide For Lenovo P780
Stock ROM
STOCK ROM ROW123 4GB
https://docs.google.com/uc?id=0B5l5EfGG-gaaNUhnRFRoODNpaUk&export=download
Click to expand...
Click to collapse
1. Does not flash on my P780 ROW 4GB (PMT Changed must be reflashed error) Although that it seems like the same scatter file
ashoknraj said:
STOCK ROM 4GB ROW123 OTA update
http://lenovo-forums.ru/Files/OS/P780/P780_ROW_S123_131231/update.zip
Click to expand...
Click to collapse
2. Does not updates (using the newly-flashed CMR), fails on "assert" the version of the ROM (currently using the other thred's S123 ROW)
HLLH said:
Hi, I'v tried the above, but cant get the stock rom to flash:
1. Does not flash on my P780 ROW 4GB (PMT Changed must be reflashed error) Although that it seems like the same scatter file
2. Does not updates (using the newly-flashed CMR), fails on "assert" the version of the ROM (currently using the other thred's S123 ROW)
Click to expand...
Click to collapse
you cannot flsh 8b ver on 4gb
HLLH said:
Hi, I'v tried the above, but cant get the stock rom to flash:
1. Does not flash on my P780 ROW 4GB (PMT Changed must be reflashed error) Although that it seems like the same scatter file
2. Does not updates (using the newly-flashed CMR), fails on "assert" the version of the ROM (currently using the other thred's S123 ROW)
Click to expand...
Click to collapse
You cannot flash 8gb ver on 4gb
deleted, used the long way and got it done
ashoknraj said:
You cannot flash 8gb ver on 4gb
Click to expand...
Click to collapse
SURE - I Did not! I tried to flash 4GB ROM u posted on a 4GB device!...
Great post ! Thanks. :good:
ashoknraj said:
U need to flash 119 with sp flash tool and update via recovery
Sent from my Lenovo P780 using xda app-developers app
Click to expand...
Click to collapse
sir please tell me after install s119 with spflashtool how to update s123 ?
for updating s123 via recovery we need wich recovery.... ? stock recovery (provided with s119 sp flashtool rom) or English CWM Recovery v6.0.1.5 ????
(sorry for my bad english)
Stock recovery
Sent from my Lenovo P780 using xda app-developers app
hey, does this ROM support the dual SIM facility?
I have a Chinese phone with stock ROW 119 installed but with baseband S820 v51. Is it ok to flash with ROW S123 and then ROW S124 or do I need to change the baseband back? If I uograde the stock ROM, will it also change the baseband?
Help..!! Phone not switching on
Hi all
I was trying to install XVIBE_ROM_v03 rom from the forum here and resulted in softbricking my lenovo P780 ROW 4 GB version.
After opening the flash tool and selecting the check box DA DL with checkbox and after clicking the Firmware->Upgrade button, i tried plugging in my cell (which is not powering on)
the flash tool doesnt proceed with a Blue and Green circles but simply doesnt do anything.
My cell is also not able to power on, is is serious, how can i revive my P780.
Please help me..!!:crying::crying:
Remove back cover, remove memory card. Near memory card slot there is red button just press it once. Now try to switch on.
Sent from my Lenovo P780_ROW using xda app-developers app
Dark_Horse said:
I have a Chinese phone with stock ROW 119 installed but with baseband S820 v51. Is it ok to flash with ROW S123 and then ROW S124 or do I need to change the baseband back? If I uograde the stock ROM, will it also change the baseband?
Click to expand...
Click to collapse
Ok, I answered my own question. Flashed to ROW S123 using the PC tool and then updated OTA to S124. All working fine, baseband changed from S820 V51 to P780 V23 during the flash. Don;t see much difference between the two ROM's other than a new Video app and a few new options.
LED still not working for notifications on S124
@ashoknraj, thanks for the deatailed instructions in first post, hardest part is installing the damn drivers and there are some steps which were different for me to get it working:
- Download the drivers and install on the PC using the exe tool in the package. Once installed, ensure USB debug mode is enabled on your P780 and that it is powered on and then connect to your PC using the USB cable. The drivers should pick up the P780 and install the device.
- Next, power off the P780 and then connect it again using the USB. The PC should again pick up the P780 again and you will see it briefly appear as an unknown device in the Device Manager. However, no need to right click and update drivers as you have already installed them previously so just let it search automatically for the best driver to use and it will finish installing. Once done, disconnect the P780.
- Run the flash tool and only connect your P780 after clicking the "Firmware->Upgrade" button. You will see a message in the status bar of the flash tool that says "searching" and then COM once the P780 has been found. If it stays on "searching" then it means the USB drivers haven't been installed properly and you need to redo.
- The whole process to flash takes about 7-8 minutes and a sqaure with a big green circle will appear on the Flash tool once done. Disconnect your P780 and power on as normal. The first boot takes about 5 minutes so don't panic, it will just show the usual Lenovo boot screen.
- Before rooting or doing anything else, go to System Settings -> All Settings -> About Phone -> System Update to update OTA from 123 to 124.
stock ROW or SLX? why?
bootloader
I just bought the Lenovo P780. I'm really happy with it so far. Just one issue, the bootloader is in Chinese. I'm not very good at reading Chinese. Does anybody know if there is a translation of the bootloader anywhere? I've been google diving for two days with no success. Even just a translation of the pinyin would be very helpful. A custom bootloader would be better. Thanks friends.
Everytime I connect my phone to my laptop, a window pops up saying "Lenovo PC Suite" and then I'd try to install it or open it but nothing ever happens. So I tried to open what's inside it, it had 3 applications, Lenovo PC Suite, Chinese Mobile Assistant, and USB Drivers 1.0.1.0 . But only the mobile assistant program installs, the 2 doesn't work. The case is that I've been asking how to root my S223 device, people said I can use VRoot and Genotool, but they doesn't work because I think I don't have the USB Drivers installed, Genotool btw is in Chinese? I can't use it. VRoot is a one click root way but it doesn't recognize my phone, it would display "??P780??" When connected.
Please, if anyone could teach me how to get and install the latest USB Drivers for my P780, that would really help me a lot. Please help me ? . Thanks in advance.
KylesIan said:
Everytime I connect my phone to my laptop, a window pops up saying "Lenovo PC Suite" and then I'd try to install it or open it but nothing ever happens. So I tried to open what's inside it, it had 3 applications, Lenovo PC Suite, Chinese Mobile Assistant, and USB Drivers 1.0.1.0 . But only the mobile assistant program installs, the 2 doesn't work. The case is that I've been asking how to root my S223 device, people said I can use VRoot and Genotool, but they doesn't work because I think I don't have the USB Drivers installed, Genotool btw is in Chinese? I can't use it. VRoot is a one click root way but it doesn't recognize my phone, it would display "??P780??" When connected.
Please, if anyone could teach me how to get and install the latest USB Drivers for my P780, that would really help me a lot. Please help me ? . Thanks in advance.
Click to expand...
Click to collapse
What Windows do you use? Try to copy the executable on your hard drive and install from there.
Sent from my Lenovo P780
stympy said:
What Windows do you use? Try to copy the executable on your hard drive and install from there.
Sent from my Lenovo P780
Click to expand...
Click to collapse
Windows 7
KylesIan said:
Windows 7
Click to expand...
Click to collapse
Here are the driver. For me works very well in windows 7.
stympy said:
Here are the driver. For me works very well in windows 7.
Click to expand...
Click to collapse
Don't I need the Lenovo PC Suite?
KylesIan said:
Don't I need the Lenovo PC Suite?
Click to expand...
Click to collapse
Not necessarily.
Sent from my Lenovo P780
stympy said:
Not necessarily.
Sent from my Lenovo P780
Click to expand...
Click to collapse
Awww, I still can't install this driver ??? why ! I opened it so many times yet it won't install
stympy said:
Not necessarily.
Sent from my Lenovo P780
Click to expand...
Click to collapse
I really can't seem to install the drivers so I would do that flash thing to get back to S214. But your tutorial about that was not newbies like me T^T you used terms that I'm not familiar with. And for the 8GB version, you said that it was the same steps, but I didn't know where to save the files, if it should be in my phone or in my laptop? Please if it's not a big trouble, provide a step by step tutorial for people like me who doesn't know so much about these things ?? thanks in advance and for all the help.
KylesIan said:
I really can't seem to install the drivers so I would do that flash thing to get back to S214. But your tutorial about that was not newbies like me T^T you used terms that I'm not familiar with. And for the 8GB version, you said that it was the same steps, but I didn't know where to save the files, if it should be in my phone or in my laptop? Please if it's not a big trouble, provide a step by step tutorial for people like me who doesn't know so much about these things ?? thanks in advance and for all the help.
Click to expand...
Click to collapse
Ok here it is:
1. download in your computer the drivers
2. install drivers
3. restart your computer (just to be sure)
4. now... turn off your phone
5. plug your USB cable in your computer
6. plug your USB cable in your phone
7. new hardware detected should appear... and should install drivers automaticaly
8. after the drivers are installed unplug your cable from the phone and restart your computer (just to be sure)
9. after restart start flash tool
10. load scatter file from ROM directory(shoul be target_bin directory)
11. check DA,DL WITH CHECKSUM (NOT OPTIONAL)
12. press Firmware Upgrade button (NOT DOWNLOAD BUTTON)
13. now just now plug usb cable to your phone.
14. firmware flash should start.
15. iff the firmware is not starting remove the case of your phone and hold pressed the little red button for about 20 seconds then release. All this must be done with cable pluget in to your phone.
16 Good luck.
stympy said:
Ok here it is:
1. download in your computer the drivers
2. install drivers
3. restart your computer (just to be sure)
4. now... turn off your phone
5. plug your USB cable in your computer
6. plug your USB cable in your phone
7. new hardware detected should appear... and should install drivers automaticaly
8. after the drivers are installed unplug your cable from the phone and restart your computer (just to be sure)
9. after restart start flash tool
10. load scatter file from ROM directory(shoul be target_bin directory)
11. check DA,DL WITH CHECKSUM (NOT OPTIONAL)
12. press Firmware Upgrade button (NOT DOWNLOAD BUTTON)
13. now just now plug usb cable to your phone.
14. firmware flash should start.
15. iff the firmware is not starting remove the case of your phone and hold pressed the little red button for about 20 seconds then release. All this must be done with cable pluget in to your phone.
16 Good luck.
Click to expand...
Click to collapse
Sorry for all of the questions ?.
Can you specify what drivers you are talking about installing? I'm getting confused. And at step 10, what ROM? Is that the Original Recovery or TWRP or the S214?
I'm very sorry for bothering you almost everyday ? and thanks again for all the help.
stympy said:
Ok here it is:
1. download in your computer the drivers
2. install drivers
3. restart your computer (just to be sure)
4. now... turn off your phone
5. plug your USB cable in your computer
6. plug your USB cable in your phone
7. new hardware detected should appear... and should install drivers automaticaly
8. after the drivers are installed unplug your cable from the phone and restart your computer (just to be sure)
9. after restart start flash tool
10. load scatter file from ROM directory(shoul be target_bin directory)
11. check DA,DL WITH CHECKSUM (NOT OPTIONAL)
12. press Firmware Upgrade button (NOT DOWNLOAD BUTTON)
13. now just now plug usb cable to your phone.
14. firmware flash should start.
15. iff the firmware is not starting remove the case of your phone and hold pressed the little red button for about 20 seconds then release. All this must be done with cable pluget in to your phone.
16 Good luck.
Click to expand...
Click to collapse
Please ? what are those drivers you're talking about on step 1 and 2? And on step 10, what is that ROM? Is that the S214?
KylesIan said:
Please ? what are those drivers you're talking about on step 1 and 2? And on step 10, what is that ROM? Is that the S214?
Click to expand...
Click to collapse
The drivers i have uploaded to you on my second post here. Look at the beginning of this thread.
Here is the link for your ROM: https://drive.google.com/folderview?id=0B6jBYS-HIMjOQWlkWVlRM19kekk&usp=sharing
Sent from my Lenovo P780
stympy said:
The drivers i have uploaded to you on my second post here. Look at the beginning of this thread.
Here is the link for your ROM: https://drive.google.com/folderview?id=0B6jBYS-HIMjOQWlkWVlRM19kekk&usp=sharing
Sent from my Lenovo P780
Click to expand...
Click to collapse
This is so confusing, at my earlier post, you said I could get back into S214, you gave me a link to downloading the Recovery files and the ROW_S214. I successfully downloaded the recovery files but the S214 file kept saying Unknown Network Error. Now my question is how do I get back to S214? ? this new link you gave me was for S222. ? my plan really is to get back to S214 then flash to LiFe ROM then flash to SLX rom or AOSP rom. Please! I want to flash to S214.
stympy said:
The drivers i have uploaded to you on my second post here. Look at the beginning of this thread.
Here is the link for your ROM: https://drive.google.com/folderview?id=0B6jBYS-HIMjOQWlkWVlRM19kekk&usp=sharing
Sent from my Lenovo P780
Click to expand...
Click to collapse
I've read from other forums and sites how to flash. Now my last question, can I flash the LiFe ROM while I'm on S223? Or do I need to go back to S214? If I can flash the LiFe ROM directly on S223 then I'd just do that then go to SLX ROM. Is it possible?
KylesIan said:
This is so confusing, at my earlier post, you said I could get back into S214, you gave me a link to downloading the Recovery files and the ROW_S214. I successfully downloaded the recovery files but the S214 file kept saying Unknown Network Error. Now my question is how do I get back to S214? ? this new link you gave me was for S222. ? my plan really is to get back to S214 then flash to LiFe ROM then flash to SLX rom or AOSP rom. Please! I want to flash to S214.
Click to expand...
Click to collapse
Here is S124 rom in this thread.
Flash this rom and then ota update till you get your favorite update. Then dont update.
http://forum.xda-developers.com/showthread.php?t=2842399
P780 stock ROM links
Sent from my Lenovo P780
---------- Post added at 07:19 AM ---------- Previous post was at 07:15 AM ----------
KylesIan said:
I've read from other forums and sites how to flash. Now my last question, can I flash the LiFe ROM while I'm on S223? Or do I need to go back to S214? If I can flash the LiFe ROM directly on S223 then I'd just do that then go to SLX ROM. Is it possible?
Click to expand...
Click to collapse
Yes you could do this.
Sent from my Lenovo P780
stympy said:
Here is S124 rom in this thread.
Flash this rom and then ota update till you get your favorite update. Then dont update.
http://forum.xda-developers.com/showthread.php?t=2842399
P780 stock ROM links
Sent from my Lenovo P780
---------- Post added at 07:19 AM ---------- Previous post was at 07:15 AM ----------
Yes you could do this.
Sent from my Lenovo P780
Click to expand...
Click to collapse
In another tutorial, they said I had to flash LiFe v0.3/0.x+ first so I can flash SLX. Can I directly flash SLX v25e? Because your thread said that ROW isn't supported in SLX v26. So I should go with SLX v25e, but can I directly flash it from LiFe or should I flash v21 first?
KylesIan said:
In another tutorial, they said I had to flash LiFe v0.3/0.x+ first so I can flash SLX. Can I directly flash SLX v25e? Because your thread said that ROW isn't supported in SLX v26. So I should go with SLX v25e, but can I directly flash it from LiFe or should I flash v21 first?
Click to expand...
Click to collapse
Hi. Look what i would do:
1. first i have to flash this rom: https://drive.google.com/folderview?id=0B2ORIgaV4iacMnZhU3U3cHJTOTA&usp=sharing
because is Chinese based and has custom recovery TWRP.
2. restart at least once.
3. second i have flashed slx 2.6 KIT China version from TWRP : https://drive.google.com/folderview?id=0B2ORIgaV4iacWGtQOE5zRjNMNEU&usp=sharing
4. That is it !
stympy said:
Hi. Look what i would do:
1. first i have to flash this rom: https://drive.google.com/folderview?id=0B2ORIgaV4iacMnZhU3U3cHJTOTA&usp=sharing
because is Chinese based and has custom recovery TWRP.
2. restart at least once.
3. second i have flashed slx 2.6 KIT China version from TWRP : https://drive.google.com/folderview?id=0B2ORIgaV4iacWGtQOE5zRjNMNEU&usp=sharing
4. That is it !
Click to expand...
Click to collapse
Oh, so it's possible that I flash the SLX v25e directly from LiFe. I already got LiFe ROM then I flashed SLX v21 ROM from TWRP. It was successful, then booted and got to a lockscreen, after I unlocked it, something popped up saying an error about the Setup Wizard not being able to run or launch? So I flashed to LiFe ROM again :crying: can you send me a link to SLX ROM v25e for 8GB ROW? Maybe the SLX ROM I flashed was defective. I'd assume that it's just the same steps. Please just help me to a link for SLX ROM v25e or any v25 for 8GB ROW. Thanks for all the help:laugh::good:
KylesIan said:
Oh, so it's possible that I flash the SLX v25e directly from LiFe. I already got LiFe ROM then I flashed SLX v21 ROM from TWRP. It was successful, then booted and got to a lockscreen, after I unlocked it, something popped up saying an error about the Setup Wizard not being able to run or launch? So I flashed to LiFe ROM again :crying: can you send me a link to SLX ROM v25e for 8GB ROW? Maybe the SLX ROM I flashed was defective. I'd assume that it's just the same steps. Please just help me to a link for SLX ROM v25e or any v25 for 8GB ROW. Thanks for all the help:laugh::good:
Click to expand...
Click to collapse
Here is how to solve your problem:
Download your ROM from here:
https://drive.google.com/folderview?id=0B2ORIgaV4iacSkd4VGtWdy1idVU&usp=sharing
Then respect the steps with the flashing.
After that reflash your SLX ROM.
stympy said:
Here is how to solve your problem:
Download your ROM from here:
https://drive.google.com/folderview?id=0B2ORIgaV4iacSkd4VGtWdy1idVU&usp=sharing
Then respect the steps with the flashing.
After that reflash your SLX ROM.
Click to expand...
Click to collapse
I got it already working, but I think v25c isn't very stable, do you have a link to v25e? That'ts the last version for ROW. Please give me a link for v25e.
Hi guys Need a help with flashing my mobile.currently using miui v.6.1.21 row 8gb I need to flash my lenovo p780 to stock since I decided to sell it.I tried to flash the KitKat version(s228) with sp flash tool version(3.13040.0.119) but after I loaded the scatter file and hit the firmware upgrade button and connect my phone the progress bar just jumps to 100% red line in the baground of progress bar and just keeps running waited half an hour nothing happens,the timer just kept running.tried with stock version s119 and s124 same results.so I downloaded the latest flash tool that is sp flash tool version(5.152.4) opened the tool and loaded the scatter file but the preload was empty I manually loaded the correct preload after pressing download the tool gave a error "unrecognized ROM detected" have no idea what to do. PLEASE HELP.
@stympy hey bro I private messaged you yesterday BTW yes I tried the flash tool version 5 (5.152.4)
vinay.dk said:
@stympy hey bro I private messaged you yesterday BTW yes I tried the flash tool version 5 (5.152.4)
Click to expand...
Click to collapse
And nothing? Is still not working?
stympy said:
And nothing? Is still not working?
Click to expand...
Click to collapse
As I said got error "unrecognized ROM detected"
Do you think this will work ?http://m.youtube.com/watch?v=v02G0SCsR30
The solution that I've found works well in this situation is format all except bootloader in SP Flash Tools and then disconnect phone, select Download option (not Firmware Upgrade) and reconnect phone)
Hi,
My friend gave me this phone to update the rom, but I'm facing a problem. Device was rooted, recovery is installed, but some really old one - it doesn't even say what kind of recovery it is. So I read that I need to update to TWRP 2.8.4.0 rev.2. Tried flashing it with TWRP apk, but after choosing it and hitting install, it reboots and goes into old recovery and I can't install new TWRP. Then I tried installing it with this guide: http://rootoreviews.com/root-Lenovo-P780-install-twrp-custom-recovery , but I'm getting error: partition 'recovery' not support flash.
Lastly I tried with SP Flash Tools, but I can't install drivers. After holding red button 2 seconds and plugging cable there is no device unknown to install drivers or any kind of device looking like this phone.
Can anyone help ?
Thanks
gunlok said:
Hi,
My friend gave me this phone to update the rom, but I'm facing a problem. Device was rooted, recovery is installed, but some really old one - it doesn't even say what kind of recovery it is. So I read that I need to update to TWRP 2.8.4.0 rev.2. Tried flashing it with TWRP apk, but after choosing it and hitting install, it reboots and goes into old recovery and I can't install new TWRP. Then I tried installing it with this guide: http://rootoreviews.com/root-Lenovo-P780-install-twrp-custom-recovery , but I'm getting error: partition 'recovery' not support flash.
Lastly I tried with SP Flash Tools, but I can't install drivers. After holding red button 2 seconds and plugging cable there is no device unknown to install drivers or any kind of device looking like this phone.
Can anyone help ?
Thanks
Click to expand...
Click to collapse
Hi. I have read your message and you have to do this:
First Tutorial.
I see that you have installed allready one custom recovery.
1. Download TWRP from here: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605
2. After download putt the zip file to your root of your internal memory
3. Reboot to your current recovery and install twrp
4. After install power down your phone.
5. Start your phone again with all buttons pressed: Power + Volume up and Volume down.
6. Go to TWRP and do a full backup of your current firmware.
7. After full backup you can install any custom firmware you want.
8. I reccomend latest MIUI from AndreyZO, Mirror 9.
9. Good luck. If you have other questions write here.
Seccond Tutorial
1. Look in this post: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605
2. Download TWRP_v2.8.4.0 rev2 and read twice that tutorial
3. Go to this post and download SP Flash Tool: https://drive.google.com/drive/folders/0B_B98oK4DpK1S1l2bXRkTGxhVFk
4. Go to this post and download latest stock KITKAT and drivers: http://forum.xda-developers.com/lenovo-p780/development/p780-row-s226-flash-flashtool-t2909202
5. When you install the drivers in windows 8,10 you must disable driver signing. Look on youtube.
6. Now you must flash new system.
7. Unpack stock Kitkat firmware.
8. Unpack TWRP.
9. Go to firmware folder and delete recovery.img and replace with TWRP
10. Flash the firmware.
11. After flash boot at least once. If by any chance your phone is Lenovo P780 speed edition, after this flash will not start. This means that you need the latest preloader. Download it from here: http://forum.xda-developers.com/lenovo-p780/help/lenovo-p780-chineese-speed-version-t2874161
12. After flash reboot in recovery by powering off the phone and start with all buttons pressed: Power + Volume up and Volume down.
13. Now you have last stock firmware with custom recovery installed. Go to TWRP and do a full backup of your current firmware.
14. After full backup you can install any custom firmware you want.
15. I reccomend latest MIUI from AndreyZO, Mirror 9.
16. Good luck. If you have other questions write here.
Tried to flash from this weird recovery, but I get error - look at pic.
I didnt flash this recovery, it must've been flashed by seller in my country. It looks like he way buying chinese versions and then flashing modified rom with polish language (very poorly translated).
Problem with sp flash tools is, I cant install usb driver. When Im in download mode I get the sound that usb device has been plugged in and after 1 second i get the unplugging sound. There is no unknown device in Device Manager, do I am not able to update the driver :/
gunlok said:
Tried to flash from this weird recovery, but I get error - look at pic.
I didnt flash this recovery, it must've been flashed by seller in my country. It looks like he way buying chinese versions and then flashing modified rom with polish language (very poorly translated).
Problem with sp flash tools is, I cant install usb driver. When Im in download mode I get the sound that usb device has been plugged in and after 1 second i get the unplugging sound. There is no unknown device in Device Manager, do I am not able to update the driver :/
Click to expand...
Click to collapse
That one is stock recovery. Proceed with the seccond tutorial.
One more question before I try to flash, I got CN verision, u answered to me in different thread:
stympy said:
Hi. Your layout is CN.
Look if you have custom recovery TWRP Installed.
If you have TWRP installed you can go to this post and install latest MIUI MINOVO.
Good luck.
Click to expand...
Click to collapse
So is that ROW Kit Kat ok for me ?
Yes it is ok as base firmware.
After you flash and install TWRP, you can install any custom firmware.
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
Ehh now in SP flash tool I get this error... I followed all steps :/
gunlok said:
Ehh now in SP flash tool I get this error... I followed all steps :/
Click to expand...
Click to collapse
Try version 5 and see what happens.
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
gunlok said:
Ehh now in SP flash tool I get this error... I followed all steps :/
Click to expand...
Click to collapse
Did you have any success with SP Flash tool v5?
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
Hi,
Sorry for delay, wasn't at home during weekend. Im flashing right now, but I had to use "Format all + download", cause only download showed error: "PMT changed for the ROM it must be download". Now I can flash the ROW version of custom rom or CN ?
Hmm I have still stock recovery not TWRP, although I replaced it with TWRP. File size matches perfectly...
Ok, worked but I flashed it with ROW version of recovery, making backup at the moment.
Got an error installing minovo_NOTE_6.12.1_ROW.zip, couldn't boot into recovery after so I decided to flash via SP Flash Tools one more time. After that booted into recovery and once more I have stock recovery xD I'm in serious WTF mode right now
Hmm I think I screwed something. After booting Kit Kat it says "Invalid imei" :/ I guess I will have to restore with MTK droid tools ? Can you guide me through that ?
gunlok said:
Hi,
Sorry for delay, wasn't at home during weekend. Im flashing right now, but I had to use "Format all + download", cause only download showed error: "PMT changed for the ROM it must be download". Now I can flash the ROW version of custom rom or CN ?
Hmm I have still stock recovery not TWRP, although I replaced it with TWRP. File size matches perfectly...
Ok, worked but I flashed it with ROW version of recovery, making backup at the moment.
Got an error installing minovo_NOTE_6.12.1_ROW.zip, couldn't boot into recovery after so I decided to flash via SP Flash Tools one more time. After that booted into recovery and once more I have stock recovery xD I'm in serious WTF mode right now
Hmm I think I screwed something. After booting Kit Kat it says "Invalid imei" :/ I guess I will have to restore with MTK droid tools ? Can you guide me through that ?
Click to expand...
Click to collapse
Hi. Look on this location:
http://forum.xda-developers.com/showthread.php?t=3174563
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
Sorry for annoying you once again. When I try to flash anything in TWRP I get error "unable to mount /system". I read that it could mean that system partition might have incorrect file system. What is the standard one for p780?
It happens when I flash the stock KK with TWRP recovery, then I want to flash Superuser. I need superuser to use MTKdroidtools to restore IMEI.
My biggest problem is when I boot the Stock KK after flashing and power OFF, I can't boot to TWRP recovery. Instead it's booting stock recovery. Only way to to boot to TWRP or any custom recovery (tried CWM) is only after fresh flashing with SPflashtools, but I can't flash superuser. If I format /system I can install superuser (no error unable to mount /system), but I have no system to boot to use MTKdroidtools.
This phone is driving me crazy....
UPDATE:
Ok i managed to restore everything, thanks for help. Can't flash custorm rom still but im making different thread.
INSTALL TWRP AND ROOT LENOVO P1M
Check this first.
a) Take backup of your important data at safe place.
b) Device must adequately charged.
c) Install USB drivers (MTK USB ALL + MTK VCOM DRIVER) to your PC. (For Windows) (Extract the driver zip and read the ReadMe.txt to install Usb Drivers)
Install TWRP
Follow the steps below.
Note : Use only TWRP 3 if your device is New Version or else your device will face some problem.
1) Download Sp Flash Tool and TWRP3 then Extract the Flash Tool & TWRP. – Then open " flash_tool.exe ".
2) Select " MT6735M_Android_scatter.txt ". It will locate in TWRP 3 folder.
3) Click Options on the top left side of the Flash Tool then check Download and make sure both of them are checked.
4) Select the " Download Only " to flash recovery.
5) Now just click on checkbox recovery and browse to the extracted files and locate " recovery.img ".
6) Turn off your Lenovo Vibe P1m
7) Click the big Download button on top right and connect the phone with usb cable in switch off condition.
8) Now you will see the red stripe showing download percentage.
9) Your phone is successfully installed TWRP now.
Steps to enter Recovery mode in Lenovo VIBE P1m :
1) Press and hold the Volume Down Button + Power Button.
2) When you see the Boot Screen, Release the Buttons.
3) Select Recovery mode using Volume Down.
4) Press Volume Up to Enter Recovery mode.
Note : When you flash recovery, do not switch on the device directly or else the recovery will replace by stock recovery.
Now TWRP recovery is installed on your Lenovo Vibe P1m.
Root Lenovo Vibe P1M
After installing TWRP on Lenovo Vibe P1M, follow the given steps to root it.
1) Download SuperSU from here.
2) Place the downloaded SuperSu zip in your external SD card.
3) Boot into Recovery Mode.
4) Click the Install menu on TWRP.
5) Browse the SuperSu zip you've downloaded and install it.
6) After SuperSu zip is successfully installed, Reboot your device.
7) Your Device is Rooted now.
Warning: I am not responsible if anything goes wrong, bricked device.
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Sorry for the late reply... i hope you've fixed it now..
Vlk Is My Name said:
Sorry for the late reply... i hope you've fixed it now..
Click to expand...
Click to collapse
Yes bro...i try another version of twrp & its work for me
subhyendu said:
Yes bro...i try another version of twrp & its work for me
Click to expand...
Click to collapse
Twrp 3.1.0 is now available...
Vlk Is My Name said:
Twrp 3.1.0 is now available...
Click to expand...
Click to collapse
How to update bro..
subhyendu said:
How to update bro..
Click to expand...
Click to collapse
Download the update and install through the previous twrp or flashify or sp flash tool or adb fastbooot, etc
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Same problem here!! ?? (Not fixed yet)?
Rocker223 said:
Same problem here!! ?? (Not fixed yet)?
Click to expand...
Click to collapse
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
subhyendu said:
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
Click to expand...
Click to collapse
By the way, I had already rooted it!! And now somehow I got it fixed!
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
SHUBHAM 13 said:
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
Click to expand...
Click to collapse
sorry for the late reply.. no need to unlock bootloader.. you can just flash TWRP via SP Flash tool.
I can't find the usb driver for windows 10.Can any one give the link?
how to update my twrp
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
hendra.dunk said:
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
Click to expand...
Click to collapse
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Vickyvignesh said:
I can't find the usb driver for windows 10.Can any one give the link?
Click to expand...
Click to collapse
yeahhh... me too... :crying: that's why I dual boot with win 7
Vlk Is My Name said:
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Click to expand...
Click to collapse
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
hendra.dunk said:
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
Click to expand...
Click to collapse
that may be due to the incompatible of updater script and twrp
Success!
Successfully booting into TWRP using this method. Thanks. My firmware is S040 (year 2017).
Dude, can you reupload the TWRP3 file from google drive? It got deleted. THANKS!