My Galaxy S3 i9300 international version got bricked, so I find many solutions here and all was succesful when I install Galaxy S5 sensation. And now my problem is I can't install any other Roms after it, it goes aborted again and again. I used TWRP and even ODIN but nothings happen. So help me I don't know the problem is, I already downloaded two Roms, the Blekota Note 4 and Lollipop for galaxy S3 i9300 and I really want to install the Blekota but was not success at all though I followed the Instruction carefully. Solution please?
Nadzlyn said:
My Galaxy S3 i9300 international version got bricked, so I find many solutions here and all was succesful when I install Galaxy S5 sensation. And now my problem is I can't install any other Roms after it, it goes aborted again and again. I used TWRP and even ODIN but nothings happen. So help me I don't know the problem is, I already downloaded two Roms, the Blekota Note 4 and Lollipop for galaxy S3 i9300 and I really want to install the Blekota but was not success at all though I followed the Instruction carefully. Solution please?
Click to expand...
Click to collapse
hi,
Download a stock rom 4.4 or 4.3 and flash the three files with odin. In the forum you can find tuto to flash a proper base with odin. After root the rom and flash CWM with odin. Then you can flash blekota Note 4 rom with CWM.
guillaume_gs3 said:
hi,
Download a stock rom 4.4 or 4.3 and flash the three files with odin. In the forum you can find tuto to flash a proper base with odin. After root the rom and flash CWM with odin. Then you can flash blekota Note 4 rom with CWM.
Click to expand...
Click to collapse
Hi sorry to point out a couple of things but the op may get confused by your post. First thing there are no stock 4.4 roms that you can flash with Odin the highest version is 4.3. Also if the op is planning to flash a custom rom after returning to stock with Odin then he does not need to root he can just flash a custom recovery like Cwm do a full wipe then flash the custom rom. (The reason why is because root is included in all custom roms). Also the op say's Odin is not working anyway
To the op what kind of error is Odin giving you?.Also make sure you are flashing a official stock rom with Odin .tar format not a zip file.
tallman43 said:
Hi sorry to point out a couple of things but the op may get confused by your post. First thing there are no stock 4.4 roms that you can flash with Odin the highest version is 4.3. Also if the op is planning to flash a custom rom after returning to stock with Odin then he does not need to root he can just flash a custom recovery like Cwm do a full wipe then flash the custom rom. (The reason why is because root is included in all custom roms). Also the op say's Odin is not working anyway
To the op what kind of error is Odin giving you?.Also make sure you are flashing a official stock rom with Odin .tar format not a zip file.
Click to expand...
Click to collapse
Hello! Thank you for the feedback, maybe with your idea i can find a solution. I am using Odin version 1.85 and 3.09 but the process stuck on "Nand Write" which I dunno what that means. The format is .tar. I even left it for an hour or two, but nothings happen and when I tried to reinstall the S5 sensation it was successful. I also full wiped data and cache and even deleted the so called Dalvik cahe as I followed the instruction of what I read here, but that does'nt help me after all. :'(
Nadzlyn said:
Hello! Thank you for the feedback, maybe with your idea i can find a solution. I am using Odin version 1.85 and 3.09 but the process stuck on "Nand Write" which I dunno what that means. The format is .tar. I even left it for an hour or two, but nothings happen and when I tried to reinstall the S5 sensation it was successful. I also full wiped data and cache and even deleted the so called Dalvik cahe as I followed the instruction of what I read here, but that does'nt help me after all. :'(
Click to expand...
Click to collapse
You could first try a "format" of System,Data,Preload,Dalvik etc (This is not a normal wipe) try using this script the Mega wipe version >> http://forum.xda-developers.com/galaxy-s3/general/tool-mega-wipesuper-wipefactory-t1832326 << you could have residue files left behind in preload etc.When using make sure you have a rom on ext sd card to flash because this wipes your System.
If that does not work you could also try the rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << good luck.
Nadzlyn said:
My Galaxy S3 i9300 international version got bricked, so I find many solutions here and all was succesful when I install Galaxy S5 sensation. And now my problem is I can't install any other Roms after it, it goes aborted again and again. I used TWRP and even ODIN but nothings happen. So help me I don't know the problem is, I already downloaded two Roms, the Blekota Note 4 and Lollipop for galaxy S3 i9300 and I really want to install the Blekota but was not success at all though I followed the Instruction carefully. Solution please?
Click to expand...
Click to collapse
Hi
Have you the latest recovery ?
Try with an other recovery
Sent from my GT-I9300 using XDA Free mobile app
I love you Man
tallman43 said:
You could first try a "format" of System,Data,Preload,Dalvik etc (This is not a normal wipe) try using this script the Mega wipe version >> http://forum.xda-developers.com/galaxy-s3/general/tool-mega-wipesuper-wipefactory-t1832326 << you could have residue files left behind in preload etc.When using make sure you have a rom on ext sd card to flash because this wipes your System.
If that does not work you could also try the rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << good luck.
Click to expand...
Click to collapse
Thank you so much. I can now finally install any custom roms..
Related
Hello,
This is my first time installing a custom rom and I hope i did everything right. I installed CM9 using the guide found on their wiki page and installed it successfully. But after installation i cannot get my sim card to work on the phone.
Recovery: ClockWorkMod
CM9: 9.0.0-i9300
Galaxy SIII international.
Thanks in advance
Muzammil Ahmed
muxammle said:
Hello,
This is my first time installing a custom rom and I hope i did everything right. I installed CM9 using the guide found on their wiki page and installed it successfully. But after installation i cannot get my sim card to work on the phone.
Recovery: ClockWorkMod
CM9: 9.0.0-i9300
Galaxy SIII international.
Thanks in advance
Muzammil Ahmed
Click to expand...
Click to collapse
try reinstall a stock rom, check if everythings is fine then reinstall CM9
Thnx for the quick response
I think the problem isn't cm9, when I was trying to install the from I couldn't boot to the cwm recovery because I forgot to root my device. Then I rooted my s3 with cf something root kit and then my signals were gone. I have the international version so my phone should be factory unlocked so I thought I should install cm anyway cuz that might solve the problem. But it didn't. I really like cyanogenmod and don't want to revert back to crappy touchwizz . The problem was there before installing cm9 but after rooting my phone.
Please any help. I really need to use my phone.
Thnx
Muzammil
muxammle said:
Thnx for the quick response
I think the problem isn't cm9, when I was trying to install the from I couldn't boot to the cwm recovery because I forgot to root my device. Then I rooted my s3 with cf something root kit and then my signals were gone. I have the international version so my phone should be factory unlocked so I thought I should install cm anyway cuz that might solve the problem. But it didn't. I really like cyanogenmod and don't want to revert back to crappy touchwizz . The problem was there before installing cm9 but after rooting my phone.
Please any help. I really need to use my phone.
Thnx
Muzammil
Click to expand...
Click to collapse
You should reinstall everything from the scratch mate, so revert your device at stock (using odin), then flash the correct [email protected] kernel and finally if everything is working flash cm9.
Edit: if your device is locked i think you can unlock it easily, search in the forum you can find out everything you need for this.
Sent from my GT-I9300 eating Jelly Bean
sorry mate ..
i am a complete noob, i dont know how to revert to stock rom, stock recovery and unroot my device
Download original firmware for your phone from sammobiles and flash it using odin. If is good then root it again and flash cm9.
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
Download original firmware for your phone from sammobiles and flash it using odin. If is good then root it again and flash cm9.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Okay,
I have downloaded my firmware file but i noticed that i need three tar files for the flashing precess through ODIN but i downloaded only 1 file *.tar.md5
no clue now what to do
Update: I tried to extract the file using splitfus but it didnt work.
Update 2: Okay now I have Installed my stock firmware and it seems to be working now.. But should I risk installing the CM9 again ?
muxammle said:
Okay,
I have downloaded my firmware file but i noticed that i need three tar files for the flashing precess through ODIN but i downloaded only 1 file *.tar.md5
no clue now what to do
Update: I tried to extract the file using splitfus but it didnt work.
Click to expand...
Click to collapse
- launch Odin
- load that ONE FILE on PDA section
- put your phone in download mode (volume down+home+power)
- connect the phone to computer, wait for drivers to be installed and ODIN to find your phone (you will see a message in Odin)
- click start
- don't touch the phone until it's done. It will boot alone
Also, it might be a good idea to wipe data / reset to factory before and after flash.
You could find all this info with google ....
On the topic, I have a similar issue. My phone was factory unlocked , and got locked after flashing latest stock firmware. Downgrading didn't solved anything. I am searching the forums right now, but it seems like all fixes are dated.
If anyone could point me in the right direction, it will be appreciated.
Thx
Hey rsndetre,
Thnx for the post, but sorry I already did that and it worked ..
Here are the method I used to get back my device back to normal and got my sim card working and again reinstalled cm9
1- Downloaded Toolkit from http://forum.xda-developers.com/showthread.php?t=1703488
2- Flashed Stock Boot Image
3- Flashed Stock Recovery Mode
4- Downloaded stock firmware from http://fus.nanzen.se/
5- Flashed stock firmware using Odin (your method above)
6- Rooted the device again (using odin and CF-Root-SGS3-v6.4)
7- Downloaded and placed cm9 and google apps package in SDCARD
8- Installed Rom Manager from Play Store.
9- Downloaded and Installed ClockWorkMod from rom manager and booted to recovery mode using RomManager
10- Then factory resetted, formatted the cache and installed the CM9 and GAPPS V11
Then my phone was good to go.
My phone is up and running, thanks rsndetre, Arsaw and TecQuality for your replies. I appreciate your time
Thanks
Muzammil Ahmed.
Hello Everyone,
Was wondering if anyone can help me solve a problem regarding the ROM of my Galaxy S2.
I've had my phone for more than 18 months now and I remember having it rooted and the ROM changed last year.
The guy who helped modify my phone is no longer around and so I am making attempts to change the ROM myself.
The current ROM on my phone is called Litening ROM version 6.1 and it was a fantastic ROM. However, it's already very old and needs to be upgraded to the latest ones.
I've downloaded and tried to install 3 ROMs so far and nothing seems to work.
I wiped the cache partition clean and also did a factory data reset.
Now, whenever I access the downloaded ROM from my sdcard, it always ends up saying:
"E: Short write of /tmp/sideload/package.zip (No space left on device)"
What does this mean? My device has ample memory and I've deleted most of the files on the sdcard already to make even more space.
My device is also rooted - so I don't think rooting it again is needed.
Please see attached pictures.
I've tried several ROMs and I'm now on my last ROM which is the Omega ROM for Galaxy S2.
All ROMs do not install and the same error message always shows up during installation.
Hope you can recommend a good solution for this.
Regards.
Do u have cwm recovery on ur phone?
Not sure about that
ankur.co.in said:
Do u have cwm recovery on ur phone?
Click to expand...
Click to collapse
Hi there. Sorry but I'm not familiar with CWM recovery. My phone is factory reset so I did not install any other program.
Is CWM recovery an app which can be downloaded?
I just saw the program CWM recovery on my friend's Galaxy S3 which has Omega ROM installed on it.
But my S2 with Litening ROM does not have this app.
Cheers.
pepicasas said:
Hi there. Sorry but I'm not familiar with CWM recovery. My phone is factory reset so I did not install any other program.
Is CWM recovery an app which can be downloaded?
I just saw the program CWM recovery on my friend's Galaxy S3 which has Omega ROM installed on it.
But my S2 with Litening ROM does not have this app.
Cheers.
Click to expand...
Click to collapse
Flash Siyah kernel get the latest lightning rom zip, install via CWM, this is the short explanation on how to do it there are hundreds of guide.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
pepicasas said:
Hi there. Sorry but I'm not familiar with CWM recovery. My phone is factory reset so I did not install any other program.
Is CWM recovery an app which can be downloaded?
I just saw the program CWM recovery on my friend's Galaxy S3 which has Omega ROM installed on it.
But my S2 with Litening ROM does not have this app.
Cheers.
Click to expand...
Click to collapse
Here mate. Download thishttp://db.tt/MxD7F6xg.
Install it through recovery and it will replace it with CWM recovery (temporary).
Then flash your new rom through that.
Sent from my Galaxy SII
Hey Guys
I came from Stock Rom, rooted my device and flash recovery. And when i come to install any custom rom my device get into a boot loop.
Fortunately I got a back up and every time a try a different custom rom and i can go back to stock.
Well i have tried with the following roms
CM10
AOKP
Slim Roms
Paranoid
Everytime i have tried any of these roms i do carefully everty step. Just exactly like the tutorial says. I've been done this before, installing custom rom in other device, like nexus s, gs3, gs2. Im familiar with those stuffs.
And i don´t think it has to do with some corrupted file when i download the base.
I have tried to reflash recovery and nothing.
Tried to change kernel, i changed to siyah and nothing. After i install custom rom , the device just show the logo of the rom and ask select language and bam!, there is the boop loop
I don´t know what else to do.
I have read something about clear nand with odin , but i dont see those options.
If anyone knows what to do, please let me know.
Thnks
Aditional Info:
Baseband: GT-I9300XXELLA
Kernel: Stock
Root with Odin3 v3.04 - CF-Auto-Root-m0-m0du-gti9300t.tar
International Version
4.1.2
Recovery 6.0.3.1
I Flash the Recovery with Rom Manager V5.5.2.3
You are wiping everything before you flash right?
wangdaning said:
You are wiping everything before you flash right?
Click to expand...
Click to collapse
Yes, i did all the wipes everytime. Reset factory, Dalvik and format system (in some cases). And nothing, still boot loop. :crying:
krizalvarez said:
Yes, i did all the wipes everytime. Reset factory, Dalvik and format system (in some cases). And nothing, still boot loop. :crying:
Click to expand...
Click to collapse
Only other suggestion is trying another recovery, I use Philz which can be flashed through odin. Oh, and did you fix permissions?
Ok im gonna try with another recovery. And yes i tried fix permissions.
I let you know what happen
Sent from my GalaxyS3 from xda-developers app
wangdaning said:
Only other suggestion is trying another recovery, I use Philz which can be flashed through odin. Oh, and did you fix permissions?
Click to expand...
Click to collapse
Today i tried with philz, cool recovery btw, but nothing. My device still stuck on boop loop after i install any custom rom
I have tried these option after i get the boop loop> wipe factory reset, wipe cache partition. And before install> wipes, fix permissions. But none of these options have help me.
Another suggestion?
What happens with stock odin flashed roms ??
jje
It boots normally, everything's fine with stock rom.
Sent from my GalaxyS3 from xda-developers app
krizalvarez said:
It boots normally, everything's fine with stock rom.
Sent from my GalaxyS3 from xda-developers app
Click to expand...
Click to collapse
That suggests a problem that is one of the following .
EXT SD card faulty
Custom rom download faulty
CWM recovery faulty.
user not following instructions .
Try flashing a Samsung Based custom rom .
jje
What do you mean boot loop is it actually restarting after boot and restating again ??
Yes. Exactly that's what i mean. It restart over and over again.
External sd card > i dont have one
Recovery > i tried with cwm and philz
Downloaded rom > i have tried download from the xda developer site and tried with different files, different roms
Im pretty sure i follow the instructions just the way it is
Sent from my GalaxyS3 from xda-developers app
Flash samsung based cwm rom .
http://forum.xda-developers.com/showthread.php?t=1868004
jje
JJEgan said:
Flash samsung based cwm rom .
http://forum.xda-developers.com/showthread.php?t=1868004
jje
Click to expand...
Click to collapse
Hey JJE, what the purpose to flash a Samsung Based Rom with CMW?
Do i have to install Odexed or Deodexed ?
Thnks for your comments
krizalvarez said:
Hey JJE, what the purpose to flash a Samsung Based Rom with CMW?
Do i have to install Odexed or Deodexed ?
Thnks for your comments
Click to expand...
Click to collapse
Do i have to install Odexed or Deodexed ?
Whatever you want .
Difference see Google.
https://www.google.co.uk/search?q=O...fficial&client=firefox-a&channel=np&source=hp
Hey jje, what is the purpose of flash a samsung based rom?
With this I understand that it will alow me to flash a custom rom after that, is that right?
Another question, how can i go back like all factory settings, i mean clear everything. I format internal sd, factory reset, do the wipes, fix permissions and once again try to install a custom rom but phone doesn't boot after show logo. Actually i install the same rom in another i9300 and everything's go fine, so the file is ok.
Sent from my GalaxyS3 from xda-developers app
Samsung-based ROM is a custom ROM based on the stock one.
Hi All..
Im pretty much a noob..last week i decided to install cyanogenmod on my phone.Im using international version of Galaxy Note GTN7000.
I saw there was a windows installer on cm website..but wanted to make a backup of my current rom..
i rooted my phone using kingo android root..installed rom manager..flashed latest clockworkmod recovery..
but on booting into recovery,i found stock recovery was being forced..i read somewhere it was because of unlocked bootloader..
on cyanogenmod wiki page,i found installation of clockworkmod recov using heimdall..everything went fine ...blue progress bar was shown in the download mode...and when i rebooted into recovery mode i saw the first danger sign..there was a yellow triangle beneath galaxy note logo..
and then it booted into clockworkmod recovery 5.8..Foolishly i did a system backup..rebooted...surprised to find phone went into black screen after displaying a note logo with yellow triangle beneath..tried recovery from clockworkmod without hope but that didnt work as expected...
This is the situation..All i need now is to install cyanogenmod 10.1.3 stable on my device..i dont want a custom rom backup anymore..
'but i saw in forums i will need to flash a custom rom from sammobile...
All help will be appreciated.Pleasen help..
chullan88 said:
Hi All..
Im pretty much a noob..last week i decided to install cyanogenmod on my phone.Im using international version of Galaxy Note GTN7000.
I saw there was a windows installer on cm website..but wanted to make a backup of my current rom..
i rooted my phone using kingo android root..installed rom manager..flashed latest clockworkmod recovery..
but on booting into recovery,i found stock recovery was being forced..i read somewhere it was because of unlocked bootloader..
on cyanogenmod wiki page,i found installation of clockworkmod recov using heimdall..everything went fine ...blue progress bar was shown in the download mode...and when i rebooted into recovery mode i saw the first danger sign..there was a yellow triangle beneath galaxy note logo..
and then it booted into clockworkmod recovery 5.8..Foolishly i did a system backup..rebooted...surprised to find phone went into black screen after displaying a note logo with yellow triangle beneath..tried recovery from clockworkmod without hope but that didnt work as expected...
This is the situation..All i need now is to install cyanogenmod 10.1.3 stable on my device..i dont want a custom rom backup anymore..
'but i saw in forums i will need to flash a custom rom from sammobile...
All help will be appreciated.Pleasen help..
Click to expand...
Click to collapse
At first flash a Samsung firmware through Odin: http://forum.xda-developers.com/showthread.php?t=1424997
I recommend you not using Rom Manager. Have a look at PhilZ's thread for having a safe kernel and custom recovery to be able to backup and flash what you want.
doubt
Can i flash stock rom from sammobile
and go for cyanogenmod windows installer without flashing philz kernel
chullan88 said:
Can i flash stock rom from sammobile
and go for cyanogenmod windows installer without flashing philz kernel
Click to expand...
Click to collapse
I really don't like this CM installer... Toolkits won't help you in case of trouble.
Download a firmware from SamMobile and flash it with Odin then you will be able to install PhilZ and your CM rom (or another one )
Primokorn said:
I really don't like this CM installer... Toolkits won't help you in case of trouble.
Download a firmware from SamMobile and flash it with Odin then you will be able to install PhilZ and your CM rom (or another one )
Click to expand...
Click to collapse
Soory for my noobness..
The Odin link here is dead...
Also i cant open sammobile firmware page..
Please could you help..
chullan88 said:
Soory for my noobness..
The Odin link here is dead...
Also i cant open sammobile firmware page..
Please could you help..
Click to expand...
Click to collapse
No worries. It's just an advice regarding CM Installer ,)
All versions of Odin here: http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
SamFirmware: http://www.sammobile.com/firmwares/ and enter N7000 into the search box.
If you can't access to this website click here then select your device on the left.
Primokorn said:
No worries. It's just an advice regarding CM Installer ,)
All versions of Odin here: http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
SamFirmware: http://www.sammobile.com/firmwares/ and enter N7000 into the search box.
If you can't access to this website click here then select your device on the left.
Click to expand...
Click to collapse
One more question..dont get me wrong..its just to skip customrom installation if its unneeded..
i plan to use cm 10.1.3..stable..
can i download it from cm site and flash it using clockworkmod recovery..
if thats ok could you explain the steps..
chullan88 said:
One more question..dont get me wrong..its just to skip customrom installation if its unneeded..
i plan to use cm 10.1.3..stable..
can i download it from cm site and flash it using clockworkmod recovery..
if thats ok could you explain the steps..
Click to expand...
Click to collapse
Yes you can but the most important thing on N7000 is to have a SAFE kernel before wiping or flashing from recovery. (more details in the N7100 sections)
Here are the general instructions to flash a new custom rom:
1. Having root and a working custom recovery (updated)
2. Boot into recovery mode (VOL DOWN + POWER + HOME) then VOL UP to accept the warning.
3. Make a Nandroid backup and backup your EFS.
4. Full wipe: wipe data (factory reset), cache, dalvik and system. Recoveries are different. You may need to go to another menu to format the system partition.
5. Flash rom
6. Flash Gapps
7. Reboot normally
Hello
i have galaxy S3 GT i9300 running on stock rom 4.3 , i tried to flash this rom
SmartDroid AOSP V45.0 (b82)
http://forum.xda-developers.com/galaxy-s3/development/myown-cm11-build-todays-git140125-t2624535
but i got stucked in boot loop i follow the instruction very well and tried many times but in vain
i returned back to stock again
any help to make this rom a try?
Thanx
elelamy said:
Hello
i have galaxy S3 GT i9300 running on stock rom 4.3 , i tried to flash this rom
SmartDroid AOSP V45.0 (b82)
http://forum.xda-developers.com/galaxy-s3/development/myown-cm11-build-todays-git140125-t2624535
but i got stucked in boot loop i follow the instruction very well and tried many times but in vain
i returned back to stock again
any help to make this rom a try?
Thanx
Click to expand...
Click to collapse
Install PhilZ recovery choose option in menu Wipe Data/Factory Reset then choose Clean to install a new rom this will wipe/format the correct files for you to flash your rom. (Make sure you have your rom on the ext sd card ready to flash! This will format your system partition so don't reboot untill you have immediately flashed the rom after wiping)..
Thanks fir your reply
I already did exactly like u said but the same result bootloop
Is there any rom or kernil to fkash before flashing this romSmartDroid AOSP V45.0?
elelamy said:
Thanks fir your reply
I already did exactly like u said but the same result bootloop
Is there any rom or kernil to fkash before flashing this romSmartDroid AOSP V45.0?
Click to expand...
Click to collapse
No.. nothing special to flash before installing.. Are you on latest PhilZ recovery?
Can you install other roms? ( To see if your phone will install other roms)
Have you tried factory resetting after flashing? (To clear any data issues that are causing a bootloop)
Have you tried downloading the rom again? ( could be a bad download)
Have you tried flashing the rom booting up the phone then flashing the gapps.
Also post the exact method that you are using to install..
tallman43 said:
No.. nothing special to flash before installing.. Are you on latest PhilZ recovery?
Can you install other roms? ( To see if your phone will install other roms)
Have you tried factory resetting after flashing? (To clear any data issues that are causing a bootloop)
Have you tried downloading the rom again? ( could be a bad download)
Have you tried flashing the rom booting up the phone then flashing the gapps.
Also post the exact method that you are using to install..
Click to expand...
Click to collapse
It's solved now by using the latest philz
Thanks for helping