Introduction
Hello this is my first ROM thought I would share. It is built straight from source. Will be adding cherry-picks along the way. Feel free to ask questions. I will try to answer them. If not will search diligently to help you.
*** Disclaimer
Not responsible if phone blows up etc,ect,ect.
Features
Battery style options
Weather in status bar
Navigation bar height
Search bar in recents
Ad Blocker
Animation options
Gesture Anywhere
App circle bar
LCD Density
Quick setting
Status bar setting
Left handed mode
Power button ends call
Volume button options
Privacy setting
many more!!!
Installation instructions
1. Download ROM
2. Download GAPPS
3. Download SuperSu
4. Boot into recovery
5. Full wipe (Dalvik Cache, Cache, Data, System, Factory Data Reset)
6. Flash Rom
7. Flash Gapps
8. Flash SuperSu
9. Reboot and Enjoy
Upgrade instructions
1. Download ROM
2.Reboot into recovery
3.Dirty flash
4.Reboot and Enjoy
Changelog
3rd post
Downloads
ROM
Gapps
Supersu
FAQ
1.Built straight from source
2. Will try to keep updated
3. Any request send me a PM
4.Hope you enjoy
If you like my work please consider a donation to help buy new computer parts thanks.
Log into paypal and my email address [email protected]
XDA:DevDB Information
AICP-5.0.2-unofficial, ROM for the Google Nexus 5
Contributors
dude1981, scrosler,GROGG88,know.patience,GOOGLE
Source Code: https://github.com/AICP
ROM OS Version: 5.0.x Lollipop
Based On: AICP
Version Information
Status: Beta
Current Beta Version: AICP 5.0.2
Beta Release Date: 2014-12-30
Created 2014-12-30
Last Updated 2015-01-04
reserved
Screenshots
one more
Changelog 2015-1-2
AICP offical changelog
http://mirror2.aicp-rom.com/hammerhead/NIGHTLY/aicp_hammerhead_lollipop-1.0RC0-NIGHTLY-20150102.zip.html
Will add my cherry picks when I put them in.
It's gonna be fun! Thanks
Screen shots? ?
If Someone Helped You Then Just Dont say Thanks...Hit The Thanks Button!
AICP! Do you have screenies?
Prattham said:
Screen shots? ?
If Someone Helped You Then Just Dont say Thanks...Hit The Thanks Button!
Click to expand...
Click to collapse
I have couple:
Sent from my Nexus 5
Do you have a mirror for the download?
Screenshots in second post.:good:
Great! I was looking for it. Where can I see all the features from official aicp?
Sent from my Nexus 5 using Tapatalk
FluffyFox20 said:
Do you have a mirror for the download?
Click to expand...
Click to collapse
Uploading mirror in op now.
dude1981 said:
Uploading mirror in op now.
Click to expand...
Click to collapse
Oh thank you so much c:
FluffyFox20 said:
Oh thank you so much c:
Click to expand...
Click to collapse
Mirror uploaded now.:good:
AvivEliyahu said:
Great! I was looking for it. Where can I see all the features from official aicp?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Look in features in op edited with features.
dude1981 said:
Mirror uploaded now.:good:
Click to expand...
Click to collapse
It still isn't working... ;c Sorry if I am troubling you.
---------- Post added at 09:35 PM ---------- Previous post was at 09:24 PM ----------
There we go! Ingot it.
FluffyFox20 said:
It still isn't working... ;c Sorry if I am troubling you.
---------- Post added at 09:35 PM ---------- Previous post was at 09:24 PM ----------
There we go! Ingot it.
Click to expand...
Click to collapse
So u got it?
dude1981 said:
So u got it?
Click to expand...
Click to collapse
Yes I got it. You have to use Mega ( Beta ) on android.
Now I flashed through Multirom, and when it boots the Boot Logo stays until about 2 min later. Then I reboot, and then when the phone turns back on it skips the MultiRom boot screen and boots right into my Main ROM.
Is this ROM not made for MultuROM?
FluffyFox20 said:
Yes I got it. You have to use Mega ( Beta ) on android.
Now I flashed through Multirom, and when it boots the Boot Logo stays until about 2 min later. Then I reboot, and then when the phone turns back on it skips the MultiRom boot screen and boots right into my Main ROM.
Is this ROM not made for MultuROM?
Click to expand...
Click to collapse
No is not multurom compatible. Will try to make compatible next update
I keep getting "unmount of /system failed; no such volume" when flashing.
I'm running TWRP. First time around, I had wiped Cache, Dalvik, System, and Data, then got stuck at the stock boot animation for 30+ minutes. Since then, I've done a full system format (twice, just to be sure), then wiped everything (again, just to be sure), then rebooted to recovery before using adb push to transfer the .zip files. Still same error, except this time I get the AICP boot animation for a few minutes, then a black screen.
I've been on a bit of a flashing rampage, and a few other ROMs gave me some errors in flashing, but they've all worked after a full system format. Any suggestions? I've searched around a bit, but everything seems vague/unrelated/broken links, and I'm just exhausted.
---------- Post added at 12:39 AM ---------- Previous post was at 12:31 AM ----------
Sorry, I don't know how the thumbs down icon go there, and I can't find any way to edit my post.
athraen said:
I keep getting "unmount of /system failed; no such volume" when flashing.
I'm running TWRP. First time around, I had wiped Cache, Dalvik, System, and Data, then got stuck at the stock boot animation for 30+ minutes. Since then, I've done a full system format (twice, just to be sure), then wiped everything (again, just to be sure), then rebooted to recovery before using adb push to transfer the .zip files. Still same error, except this time I get the AICP boot animation for a few minutes, then a black screen.
I've been on a bit of a flashing rampage, and a few other ROMs gave me some errors in flashing, but they've all worked after a full system format. Any suggestions? I've searched around a bit, but everything seems vague/unrelated/broken links, and I'm just exhausted.
---------- Post added at 12:39 AM ---------- Previous post was at 12:31 AM ----------
Sorry, I don't know how the thumbs down icon go there, and I can't find any way to edit my post.
Click to expand...
Click to collapse
WHAT version of TWRP are you using?
Related
This is a working build of CWM recovery.
Thank you to those you have confirmed everything working.
credit goes to utkanos he made this.
if you decide to continue building from this, no need to ask, just give utkanos credit
device tree if you want to continue to work from this:
https://github.com/utkanos/android_device_htc_fireball
download link
http://dl.dropbox.com/u/26383143/HTC Incredible 4G/fireball4.img
Has anyone tried this?
droid10 said:
Has anyone tried this?
Click to expand...
Click to collapse
I can try it when I get home (in about an hour and a half)
---------- Post added at 04:18 PM ---------- Previous post was at 04:06 PM ----------
Flashed, works great.
To access the SD card to flash things, rather than choosing "Choose zip from sdcard" you need to choose "choose zip from external sdcard".
This works just like the regular CWM recovery on the Inc2 (For those that had it) no touch screen aspects of this at all.
For reference (and those lazy)
Boot to the bootloader (when phone is off, hold down power button and Volume Down button till you see the bootloader
OR type this in terminal while phone is on and plugged in (with adb and fastboot)
Code:
adb reboot bootloader
once in bootloader, and makesure fireball4.img is in the same folder you are working in
Code:
fastboot flash recovery fireball4.img
Code:
fastboot reboot
- Or choose "reboot" in the bootloader.
And now you have the recovery. To access it (while phone is fully booted):
Code:
adb reboot recovery
It works perfectly. Thanks
this works perfectly. i tried twrp but its not for me im used to ext4 but ive also used cwm in the past with my og inc.thanks for this
---------- Post added at 02:17 PM ---------- Previous post was at 02:06 PM ----------
I'm looking in the download section of Rom manager and I gotta ask is this from the dinc 2
Linch89 said:
this works perfectly. i tried twrp but its not for me im used to ext4 but ive also used cwm in the past with my og inc.thanks for this
---------- Post added at 02:17 PM ---------- Previous post was at 02:06 PM ----------
I'm looking in the download section of Rom manager and I gotta ask is this from the dinc 2
Click to expand...
Click to collapse
im confused by your question?
a recovery is unique to a phone
u can go ahead and try to run an inc2 recovery on your phone and see what happens, but i don't suggest it lol.
i also didn't build this, I asked utkanos and he did it.
I haven't tried/put in any effort to build a recovery.
I'd like to get the soft keys working on this.
andybones said:
im confused by your question?
a recovery is unique to a phone
u can go ahead and try to run an inc2 recovery on your phone and see what happens, but i don't suggest it lol.
i also didn't build this, I asked utkanos and he did it.
I haven't tried/put in any effort to build a recovery.
I'd like to get the soft keys working on this.
Click to expand...
Click to collapse
I'm guessing he means he was using a CWM recovery on his OG Dinc. I also used the CWM recovery on my OG Dinc and was very happy with it on that phone. CWM did all I needed and worked very well with the pro version of ROM Manger to do scheduled Nandroid backups. Based on that experience, I'm leaning towards using CWM, too. (FWIW, I'm also using a CWM build on my Kindle Fire, too)
This is why I asked if he built it from the dinc2 just curious
Linch89 said:
This is why I asked if he built it from the dinc2 just curious
Click to expand...
Click to collapse
sorry I'm still confused
andybones said:
sorry I'm still confused
Click to expand...
Click to collapse
Who's on first?
Jafmf95 said:
Who's on first?
Click to expand...
Click to collapse
Yes
junkmail9 said:
Yes
Click to expand...
Click to collapse
Bacon
Lemon meringue pie.
andybones said:
sorry I'm still confused
Click to expand...
Click to collapse
If you look at his screenshot, you'll notice that ROM Manager thinks his phone is the Inc2. That's why he's asking.
mdmower said:
If you look at his screenshot, you'll notice that ROM Manager thinks his phone is the Inc2. That's why he's asking.
Click to expand...
Click to collapse
Great catch. I missed that entirely. That could create a bit of a problem if he tries to install a ROM. Sounds like a question for Koush.
I checked the download section of Rom manager for ****s and gigs and that's what I found. Secretly, I was hoping that cm would magically be in there
I don't use ROM manager... I manage my own ROMs
andybones said:
I don't use ROM manager... I manage my own ROMs
Click to expand...
Click to collapse
Sure. I never installed any ROMs from it, either, but the automated nandroid back up feature is nice.
Sent from my Fireball using Xparent Blue Tapatalk 2
have you got the device tree that was used to build this?
Lloir said:
have you got the device tree that was used to build this?
Click to expand...
Click to collapse
here is the device tree
https://github.com/utkanos/android_device_htc_fireball
Hi,
a few weeks ago I got a Samsung X Cover 2 after my loved Defy boke down...Thanks to the rooted image that theboegl created I examined the device and started to port CWM to the device. Some photos of CWM on the S7710 are here. Sorry - cant post outside links before I did 10 posts....attached.:silly: Thanks to OliverG96 who worked on CM for the S3 mini that is quite similiar to the skomer it wasn't a hard job to get it running.
The source is on my github account. (no link - see above - just google: github flxo). Feel free to comment and improve....
Code:
sudo heimdall flash --pit skomer.pit --Kernel2 recovery.img
DISCLAIMER: Use this recovery image at your own risk! You are responsible to any harm that is caused to your device during the use of this software.
Download
Mirror
CWM Changelog:
2013/07/08: Added kernel build with source from Samsung Open Source. Fixed external_sd stuff that enabled restore and backup to the sd.
2013/07/09: Fixed CWM boot loop (reboot recovery menu item or reboot syscall). Updated j4fs and param kernel modules.
2013/07/11: Added ext4 capabilities to installer (needed for otapackage). Updated fstab with reserved area at the partition end.
2013/07/19: Updated to version 6.0.3.3. edit: weird reboot issue.
2013/07/19: Updated to version 6.0.3.6 (cm-10.1). Sideload still not functional.
2013/11/03: Updated to version 6.0.4.4 (cm-10.2).
2013/11/09: Fixed USB and sideload. Do not use.
2013/11/14: Updated to version 6.0.4.5. Added param and j4fs modules to recovery.
2014/01/12: Updated to version 6.0.4.6. <-- USE THIS VERSION
TWRP Changelog:
2013/12/07: Initial TWRP version from Omnirom 4.3 branch
2013/12/21: Source update. Minor kernel fixes.
Thanks for your work!
For those who want to try this beta-build:
download the newest odin-flashable build from here - thanks to @flxo
start Odin >= 3.07
select the downloaded CMW in the PDA section
unselect autoreboot if you would like to test it after flashing immediately
plug your XCover2 in
flash it
let it reboot/if you want to test cwm now:
power off by holding the power button
hold Volume +, Home and Power button simultaneous
you should see cwm
done
BTW: no one should just follow me by doing a reboot recovery, though I have created an odin-flashable restore - build 12.07.2013 for getting out of the "boot to recovery" loop without loosing data.
flxo said:
Hi,
a few weeks ago I got a Samsung X Cover 2 after my loved Defy boke down...
Thanks to the rooted image that theboegl created I examined the device and started to port CWM to the device. Some photos of CWM on the S7710 are here. Sorry - cant post outside links before I did 10 posts....attached.:silly:
Thanks to OliverG96 who worked on CM for the S3 mini that is quite similiar to the skomer it wasn't a hard job to get it running.
The source is on my github account. (no link - see above - just google: github flxo). Feel free to comment and improve....
I did not try yet to flash a zip with the CWM port but so far the graphics look good and the SD is mounted. I attached the recovery image to this post:
Hang on.
cheers,
flxo
sorry for the short description, but it's Friday 9pm and I really shouldn't sit in front of my computer...
Click to expand...
Click to collapse
I'll try this out. Oh and if this works, I'll see if I can start porting any roms to this device now
---------- Post added at 11:28 AM ---------- Previous post was at 10:50 AM ----------
Yo, I made a flashable odin.tar! Enjoy testing guys, cheers
http://rapidshare.com/files/2716144166/recovery.tar.md5
I keep my fingers crossed for it.
It will open new world for our phone.
Wysyłane z mojego Nexus 7 za pomocą Tapatalk 2
TheBoegl said:
BTW: no one should just follow me by doing a reboot recovery, though I have created an odin-flashable restore for getting out of the "boot to recovery" loop without loosing data.
Click to expand...
Click to collapse
Thanks. That fix is exactly what I need right now...
Everyone be carefull - this image is absolutely untested and may brick your device....
Lum_Os said:
I'll try this out. Oh and if this works, I'll see if I can start porting any roms to this device now
---------- Post added at 11:28 AM ---------- Previous post was at 10:50 AM ----------
Yo, I made a flashable odin.tar! Enjoy testing guys, cheers
http://rapidshare.com/files/2716144166/recovery.tar.md5
Click to expand...
Click to collapse
Has anyone tried
kolmanb said:
Has anyone tried
Click to expand...
Click to collapse
Tried flashing, works like a charm. Just hold volume up, home and power, let go of power when you feel vibration and keep hold volume up and home button and you're in cwm! Gonna try port first custom rom, cm10 from s2 and see if it truly works
Hello,
I have just tested : very good ! very good !
Thanks a lot.
:laugh:
Works perfectly super !:laugh::good:
backup: ok
restore: ok
Apology : restore works fine
install zip : from sd card; ext.sd card ok
kolmanb said:
Apology : restore works fine
install zip : from sd card; ext.sd card ok
Click to expand...
Click to collapse
Thanks!
I changed the recovery.fstab to mount the external SD on /sdcard. Storing backups on the real SD is IMHO more convenient.
The updated image is: 20130606_recovery.img
Thanks to TheBoegl for the hint.
flxo said:
I changed the recovery.fstab to mount the external SD on /sdcard. Storing backups on the real SD is IMHO more convenient.
Click to expand...
Click to collapse
Thats great. For everyone who want to flash this with odin try this image - it is the packed version of @flxo.
I have reupped the previous recoveries because they were unflashable with odin.
I really apologize for that mistake my Finnish, Slovenian and Bulgarian members if Odin is stuck, just unplug your phone and select the new image, plug it in again and flash.
This double post is to inform the few of you who have downloaded the file already.
I created an Odin flashable .tar.md5 of the 20130606_1_ version. I tried it myself, works fine.
One nitpicky question: flxo, shouldn't it be 20130706? It's July after all
flxo said:
[*]reboot recovery: reboots device normally. failed.
Click to expand...
Click to collapse
20130606_1_ fixed that for me, the device froze for half a minute and then rebooted into recovery.
EDIT:
Bad news: Somehow, the phone exclusively reboots into recovery now. I don't know if it's due to choosing "reboot recovery" or something else...
HeavyMoertel said:
Bad news: Somehow, the phone exclusively reboots into recovery now. I don't know if it's due to choosing "reboot recovery" or something else...
Click to expand...
Click to collapse
I guess you found my fix for that in the second post :good:
TheBoegl said:
I guess you found my fix for that in the second post :good:
Click to expand...
Click to collapse
Yeah, well, I really shouldn't have followed you on that, I guess.
But many thanks for reminding me of your fix. :highfive:
---------- Post added at 12:45 AM ---------- Previous post was at 12:13 AM ----------
Issue: factory reset formats the whole SD card.
I'm so sorry, can you tell me how to install CWM, I tried to Odin MOD but nothing Nest, thank you very much.
you were faster than i thought.
I've added the description and link in the second post.
Let me know if you need more information.
Galaxy S5 Sport SM-G860P Stock Roms
OH1 stock Lollipop Kernel added to the bottom of this post!
Kitkat 4.4.2 NG3 Stock Deodexed ROM
This is a base test version.
Someone please backup, flash with custom recovery and let me know how it goes in case I need to make some further changes.
Download Link -- > SM-G860P_NG3_ROOTED_DEODEXED.TEST.zip
Deodexed Rom Features (so far):
- root included
- busybox
- init.d support/repacked kernel
Full Stock Tar Recovery
Restore the phone back to stock.
Download Link -- > G860PVPU1ANG3_G860PSPT1ANG3_SPR.zip
Custom Recovery:
Flash custom roms and mods.
[RECOVERY] CWM S5 Sport SM-G860P
Instructions to Install Tar Files with Odin
• The full tar does not wipe Data or internal SD.
You may want to do a full wipe in custom recovery before flashing full tar if you have issues with data apps.
• Extract (unzip) the firmware file
• Extract Odin -- Odin v3.09 Download Link
• Power down the phone (or pull the battery, it is important to flash the OTA from a powered off state)
• Open Odin v3.09
• Boot the phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the firmware/recovery file to AP / PDA (depending on version of Odin)
• For modems, add the file to CP / PHONE (depending on version of Odin)
• Make sure re-partition is NOT ticked
• Click the start button, sit back and wait a few minutes
I think its possible to flash a Sprint SM-G900P 4.4.2 rom on this phone if you follow the following steps:
1. Have custom recovery already installed and a backup in place in case you need to flash back.
2. Place the rom and stock kernel on phone SD
3. Boot into custom recovery, do a full wipe
4. Install the SM-G900P touchwiz based rom, do not reboot yet
5. Flash the stock SM-G860P _NG3_Stock_Kernel.zip provided in Post #1.
6. Restart the phone
@SeanRinVA and @wolfleatherworks :
You guys have showed interest in getting MOAR on your SM-G860P phones, so I thought I'd mention you here to help you find this thread. Make sure to have a nanoid backup beforehand and let everyone know how it went.
I'd watched the MOAR thread for a while, but it wasn't compatible with the SM-G860P (hung boot).
Sent from my SM-G860P using Tapatalk
SeanRinVA said:
I'd watched the MOAR thread for a while, but it wasn't compatible with the SM-G860P (hung boot).
Sent from my SM-G860P using Tapatalk
Click to expand...
Click to collapse
@tdunham just posted this yesterday and the second post this morning, but yes, he's looking for someone to test it (neither of us have the G860). If you have the time, could you give this a try and post back success or failure? Especially if you can get MOAR installed.
Ramer said:
@tdunham just posted this yesterday and the second post this morning, but yes, he's looking for someone to test it (neither of us have the G860). If you have the time, could you give this a try and post back success or failure? Especially if you can get MOAR installed.
Click to expand...
Click to collapse
I can test it tonight. I've downloaded the Kernel...now to download the latest MOAR.
I've got an S5 Sport, just picked up today. Will be testing the kernel with MOAR.
---------- Post added at 08:32 PM ---------- Previous post was at 07:58 PM ----------
Well it doesn't seem to be boot looping, I'll let it sit and cook for a bit longer. Currently it's just flashing the android white text and disappearing, not sure how long it should normally be on 1st boot.
---------- Post added at 08:46 PM ---------- Previous post was at 08:32 PM ----------
Doesn't seem to have worked, I waited a good while but it didn't go any further. Attempted downloading your Rooted Deodexed test but it downloads as a 0kb file.
EDIT: Tried another mirror, seems to be downloading properly now.
---------- Post added at 09:34 PM ---------- Previous post was at 08:46 PM ----------
Got it downloaded, copied over via adb -- attempted install, getting (bad) - installation aborted.
---------- Post added at 09:42 PM ---------- Previous post was at 09:34 PM ----------
Confirmed MD5 match. Ideas?
KrimsonStarfly said:
Doesn't seem to have worked, I waited a good while but it didn't go any further. Attempted downloading your Rooted Deodexed test but it downloads as a 0kb file.
EDIT: Tried another mirror, seems to be downloading properly now
Got it downloaded, copied over via adb -- attempted install, getting (bad) - installation aborted.
Click to expand...
Click to collapse
I'm not sure what adb was for. You don't have drivers installed with a running rom so you can copy everything over to the phone?
Did you download the stock rom last night because the stock rom last night had a problem and has since been replaced. The one you should have the same name as the link in the OP. I even flashed it to make sure it would at least run.
tdunham said:
I'm not sure what adb was for. You don't have drivers installed with a running rom so you can copy everything over to the phone?
Did you download the stock rom last night because the stock rom last night had a problem and has since been replaced. The one you should have the same name as the link in the OP. I even flashed it to make sure it would at least run.
Click to expand...
Click to collapse
I was using ADB since I didn't want to restore from backup until I was done testing. I'll try re-downloading and doing it over again to see if I can get it working, I'm off work today so now is the perfect time to try it further.
So this has me stumped -- For some unknown reason, I seem to be unable to copy over SM-G860P_NG3_ROOTED_DEODEXED.TEST.zip using MTP. I fiddled with drivers for the last hour and i'm at a loss -- it doesn't seem to be a driver problem, I can copy over MOAR and other files, but it won't let me copy over your test at all.
tdunham said:
I think its possible to flash a Sprint SM-G900P 4.4.2 rom on this phone if you follow the following steps:
1. Have custom recovery already installed and a backup in place in case you need to flash back.
2. Place the rom and stock kernel on phone SD
3. Boot into custom recovery, do a full wipe
4. Install the SM-G900P touchwiz based rom, do not reboot yet
5. Flash the stock SM-G860P _NG3_Stock_Kernel.zip provided in Post #1.
6. Restart the phone
Click to expand...
Click to collapse
Ramer said:
@tdunham just posted this yesterday and the second post this morning, but yes, he's looking for someone to test it (neither of us have the G860). If you have the time, could you give this a try and post back success or failure? Especially if you can get MOAR installed.
Click to expand...
Click to collapse
works booted up with moar rom :good:
---------- Post added at 09:39 PM ---------- Previous post was at 09:33 PM ----------
tdunham said:
Galaxy S5 Sport SM-G860P Stock Roms
Kitkat 4.4.2 NG3 Stock Deodexed ROM
This is a base test version.
Someone please backup, flash with custom recovery and let me know how it goes in case I need to make some further changes.
Download Link -- > SM-G860P_NG3_ROOTED_DEODEXED.TEST.zip
Deodexed Rom Features (so far):
- root included
- busybox
- init.d support/repacked kernel
Full Stock Tar Recovery
Restore the phone back to stock.
Download Link -- > G860PVPU1ANG3_G860PSPT1ANG3_SPR.zip
Custom Recovery:
Flash custom roms and mods.
[RECOVERY] CWM S5 Sport SM-G860P
Instructions to Install Tar Files with Odin
• The full tar does not wipe Data or internal SD.
You may want to do a full wipe in custom recovery before flashing full tar if you have issues with data apps.
• Extract (unzip) the firmware file
• Extract Odin -- Odin v3.09 Download Link
• Power down the phone (or pull the battery, it is important to flash the OTA from a powered off state)
• Open Odin v3.09
• Boot the phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the firmware/recovery file to AP / PDA (depending on version of Odin)
• For modems, add the file to CP / PHONE (depending on version of Odin)
• Make sure re-partition is NOT ticked
• Click the start button, sit back and wait a few minutes
Click to expand...
Click to collapse
i tried SM-G860P_NG3_ROOTED_DEODEXED.TEST.zip but it aborted and said bad could be the . between DEODEXED and TEXT i try to rename but then it wouldnt let me put it on my phone. just a though
1991mustang50 said:
works booted up with moar rom :good:
---------- Post added at 09:39 PM ---------- Previous post was at 09:33 PM ----------
i tried SM-G860P_NG3_ROOTED_DEODEXED.TEST.zip but it aborted and said bad could be the . between DEODEXED and TEXT i try to rename but then it wouldnt let me put it on my phone. just a though
Click to expand...
Click to collapse
I accidentally added a space in the filename. I did flash it to test but now I think I removed the space in the name before doing so. If possible, try downloading to pc first and let me know how it goes in case I need to reupload it to the hosting site with a corrected filename.
1991mustang50 said:
works booted up with moar rom :good:
Click to expand...
Click to collapse
So, I'm not attempting to be dumb here, but it might be inevitable.
G900 stock roms boot with G860 kernel?
I use MOAR ROM(havent tried any other roms yet) for 900P and the the kernel zip in post #1 and using steps in post #2 I am running on it now
Great. Being a stock-based ROM, I would imagine that all stock Roms work with G860 kernel. Consequently, all AOSP ROMs should work with a kernel compiled for G860. There are 2 new G860s in the house and my intent was to compile CM11/12 for the Sport; however, if all that is necessary is the kernel&modules I won't bother pulling blobs.
Thanks. The phones aren't entirely at my disposal or I would do more testing.
tdunham said:
I accidentally added a space in the filename. I did flash it to test but now I think I removed the space in the name before doing so. If possible, try downloading to pc first and let me know how it goes in case I need to reupload it to the hosting site with a corrected filename.
Click to expand...
Click to collapse
Redownloaded still a no go it just go to opening update and then fails sorry for bad news thanks for trying
It works!
I used the instructions here to install the rom for the G900P as linked to below. I've messed with it only for about 20 minutes but it worked perfectly fine! So much bloatware though, and I'm coming from the S3 scene and am not too familiar with what the G900P had to offer in terms of custom ROMs. If anyone knows a good lightweight one with powerful customization options please let me know so I can try it. I am doing my first backup of this ROM as I type this and will also be doing a restore of my previous ROM (stock with the bloatware removed manually) for now and will probably tweak the MOAR ROM more later this week. Just want to say thank you to everyone in this thread, you guys are amazing!
http://forum.xda-developers.com/showthread.php?t=2790808
I'm going to give the MOAR of try with the kernel from post one.. I really do hope that more development comes to this phone..
doubledragon5 said:
I'm going to give the MOAR of try with the kernel from post one.. I really do hope that more development comes to this phone..
Click to expand...
Click to collapse
Well, at least you guys can run a custom rom now.
I wish I could be more help but I have the SM-G900P but thought I'd take a shot at getting the Sport a little help.
tdunham said:
Well, at least you guys can run a custom rom now.
I wish I could be more help but I have the SM-G900P but thought I'd take a shot at getting the Sport a little help.
Click to expand...
Click to collapse
I saw a couple of links in the recovery thread for the sport full resotore.. One link the files are over a gig, the other one is for about 848mb.. I wounder which is the real deal... The first link I could not download crap, but the second one I did. BTW is the modem included in your file for your rom?I was woundering because if I flash MOAR were can I find the modem or does it matter
with very little activity lately for the LGV20, specifically the H918 T-Mobile variant, I created a TWRP flashable package for the recent H91810q release. this zip flash every partition included in the latest KDZ package with the exception of recovery to keep TWRP. standard disclaimer applies, you do all of this at YOUR OWN risk! because 10q is not rootable, you need to be root'd before flashing this! failure to do so will probably cause you to lose root and/or lose TWRP! and worst of all, because 10q can't be downgraded to 10j (last version where you can still obtain root via dirtycow) because of Anti-RollBack, you're fscked!
NOTE1: you can find the partitions that will be flashed in the updater-script. to be extra cautious you can back up all of the partitions that will be overwritten with the following: dd if=/dev/block/bootdevice/by-name/{partition} of=/external_sd/backup/{partition}.img.
NOTE2: boot partition has been modified only to remove rctd, nothing else so I consider this to still be stock
Instructions:
download H91810u.zip file listed below and put on microSD card
download your choice of root and put on microSD card, choose from either Magisk or SuperSU *Note: v12.0 of Magisk does not work with the LGV20 device in general and v14.0 is recommended.
backup any data from internal "SD card"
boot into TWRP (requires TWRP recovery to already be installed)
create a TWRP backup of the device
flash zip from microSD card by using "Install"
FLASH YOUR CHOICE OF ROOT - Flashing root is VERY IMPORTANT BEFORE REBOOTING!
reboot
profit!
Download:
H91810q.zip
old 10q md5sum: 8c2e76ded9759a63b1ffac86f3941649
new 10q md5sum: c7d4086b3a0a786d1501ef7e4ce22f32 - re-zipped in Linux for proper alignment
H91810r.zip
wrong 10r md5sum: 9e2e1f8c56079d7bf629ce5e375d7551 (this is actually the md5sum for the KDZ)
correct 10r md5sum: 194b2bc41aa6dbdd7b9a371392f7b930
H91810s.zip
10s md5sum: f187fdefe4c3612c5811e9fbeb0748c5
H91810t.zip - rctd and triton both disabled, previous versions only removed rctd
10t md5sum: b00c2f644b15eb15e459c48830caa5da
H91810u.zip - rctd and triton both disabled, previous versions only removed rctd
10u md5sum: f51b2b11a30dc448b0da0edc750bb587
Flashing Process (what flashing this zip does):
flash necessary partition images with the exception of recovery (to keep TWRP) from the KDZ
rename /system/recovery-from-boot.p to /system/recovery-from-boot.bak to prevent stock recovery from being installed on boot
wipes dalvik-cache and cache
BIG thanks to @McNutnut on guidance, as well as his script to put all of this together!
also thanks to @bullghost for the KDZ extractor (https://forum.xda-developers.com/showthread.php?t=2600575)
@Tilde88 for the original updater-script template w/root (https://forum.xda-developers.com/v20/development/us996-nrd90m-modded-notsostock-rom-v5-1-t3526542)
Awesome thanks.. I'm on it!
---------- Post added at 12:50 AM ---------- Previous post was at 12:07 AM ----------
Didn't work... Still shows 10p. I noticed the flash process was rather fast also.
storm68 said:
Awesome thanks.. I'm on it!
---------- Post added at 12:50 AM ---------- Previous post was at 12:07 AM ----------
Didn't work... Still shows 10p. I noticed the flash process was rather fast also.
Click to expand...
Click to collapse
Dude, thanks for whipping this out so fast! (TWSS) I will get right on making a debloated rom from this. Is it ARB 1?
So I HAVE to flash root? Sometimes I don't flash root because of my gear S3 watch.
I just flashed but still showing 10p. But the kernel info shows Sept 12. So the kernel is updated but wondering on why it still shows 10p on software info @ about phone.
storm68 said:
Awesome thanks.. I'm on it!
---------- Post added at 12:50 AM ---------- Previous post was at 12:07 AM ----------
Didn't work... Still shows 10p. I noticed the flash process was rather fast also.
Click to expand...
Click to collapse
hold on, let me re-zip and re-upload. I had used two different methods to add the files to the archive so I'm going to re-do it all with one method
texasaggie1 said:
Dude, thanks for whipping this out so fast! (TWSS) I will get right on making a debloated rom from this. Is it ARB 1?
So I HAVE to flash root? Sometimes I don't flash root because of my gear S3 watch.
Click to expand...
Click to collapse
yes, this is ARB1 and yes, root is needed if you want to stay root'd
As you can see the updater script shows install 10p.
storm68 said:
As you can see the updater script shows install 10p.
Click to expand...
Click to collapse
yep, for some reason using Windows to create zip files causes inconsistencies. I've zipped up everything in Linux this time and double checked the updater script to make sure everything is good to go and am uploading it as I type... I've already updated the OP with the new md5sum and the link should remain the same. I'll give a heads up once it's live
Ok thanks for your time. Appreciate it. ?
storm68 said:
Ok thanks for your time. Appreciate it.
Click to expand...
Click to collapse
done! uploaded and downloaded myself to verify everything is the correct one. this should bring you to 10q for everything... sorry for the troubles of flashing again. don't forget to flash root just in case lol
No problem. No apology needed being you really don't have to do this for the community. Thanks again.
Sorry if I'm asking an obvious question but when did t mobile release a new update? I thought the latest version was 10p???
Flashed... All good!
---------- Post added at 02:41 AM ---------- Previous post was at 02:40 AM ----------
Still_living714 said:
Sorry if I'm asking an obvious question but when did t mobile release a new update? I thought the latest version was 10p???
Click to expand...
Click to collapse
Mine came yesterday. Updater to 10q. If you haven't gotten it yet you will..
storm68 said:
Flashed... All good!
---------- Post added at 02:41 AM ---------- Previous post was at 02:40 AM ----------
Mine came yesterday. Updater to 10q. If you haven't gotten it yet you will..
Click to expand...
Click to collapse
Any big improvements that you can see?
i flashed and once i unlocked my phone, it kept saying process.android keeps stopping repeatedly. booted back into twrp to restore the backup i made in twrp and now the keeps rebooting to the lg screen. Can anybdoy help me out please. i was ww kernel and 10k
Still_living714 said:
Any big improvements that you can see?
Click to expand...
Click to collapse
I would have to wait and see. But first hand it's about the same as 10p no rctd.
---------- Post added at 04:02 AM ---------- Previous post was at 03:26 AM ----------
Lgv20user said:
i flashed and once i unlocked my phone, it kept saying process.android keeps stopping repeatedly. booted back into twrp to restore the backup i made in twrp and now the keeps rebooting to the lg screen. Can anybdoy help me out please. i was ww kernel and 10k
Click to expand...
Click to collapse
First of be advised that this is anti roll back. Once on it you can't go backwards to other older roms. In reference to your problem you'll have to do a battery pull. Put battery back in. Now hold down volume down and power button at the same time, when you see LG screen release power button for two seconds then push again holding down power. During all this never release volume down. Now you'll get a reset screen with yes and no option. Use volume key to choose yes, twice..... This will get you back to TWRP. In your case I wouldn't even bother with back up but you can try again if want. What I would do is flash something else that I know works. Then decide from there what to do... Maybe redownload again. May be corrupt some how. I assume your on h918. Hope so! Good luck.
storm68 said:
I would have to wait and see. But first hand it's about the same as 10p no rctd.
---------- Post added at 04:02 AM ---------- Previous post was at 03:26 AM ----------
First of be advised that this is anti roll back. Once on it you can't go backwards to other older roms. In reference to your problem you'll have to do a battery pull. Put battery back in. Now hold down volume down and power button at the same time, when you see LG screen release power button for two seconds then push again holding down power. During all this never release volume down. Now you'll get a reset screen with yes and no option. Use volume key to choose yes, twice..... This will get you back to TWRP. In your case I wouldn't even bother with back up but you can try again if want. What I would do is flash something else that I know works. Then decide from there what to do... Maybe redownload again. May be corrupt some how. I assume your on h918. Hope so! Good luck.
Click to expand...
Click to collapse
what do you recommend i flash
Lgv20user said:
what do you recommend i flash
Click to expand...
Click to collapse
Well we really don't know if your system went to 10q now, so........ You can try again. On both, the backup or 10q. Since you know now how to get to TWRP with battery pull you can try both, see what works. Try backup first. If it doesn't work you may have system in 10q now being you backed up a 10k system may not work now. If it doesn't try q again. If that doesn't work then download 10p or redownload 10q and side load on TWRP from computer. Then flash again. These are steps I would do.. if someone tells you different then it's your choice. Different ways for different things.
storm68 said:
Well we really don't know if your system went to 10q now, so........ You can try again. On both, the backup or 10q. Since you know now how to get to TWRP with battery pull you can try both, see what works. Try backup first. If it doesn't work you may have system in 10q now being you backed up a 10k system may not work now. If it doesn't try q again. If that doesn't work then download 10p or redownload 10q and side load on TWRP from computer. Then flash again. These are steps I would do.. if someone tells you different then it's your choice. Different ways for different things.
Click to expand...
Click to collapse
so 10q is showing up. i am having issues with the modem i believe because i dont get tmobile recepetion and as soon as i put into airplane mode, the error message stops.
I haven't tried the 10p weta kernel yet but it may not work being this stock kernel on 10q is updated to the September security patch. May try later today.
First off, thanks for keeping my beloved H918 alive!. Thought all future dev for the V20 was dead.
Now a question. Any timeframe on a debloated version? Not in a hurry mind you, just curious.
Welcome to the DREAM ROM!
Disclaimer1: Your warranty is now void!
I am not responsible if you brick your phone. or kill your sd card!
I cannot be held responsible for smoke, fire, water, or other natural disasters.
So please READ the entire OP!
Disclaimer2: Always make a backup first!! Flash at your own risk!
Clean install is always recommended, but at minimum make sure you wipe!
ROM FEATURES
- Based on G950USQS2BRB1.
- Fully De-odexed.
- Rooted.
- BusyBox.
- Little Debloated.
- Samsung Knox Removed.
- Safestrap v4.08 B02
Installation:
EDL METHOD:
1. Make sure phone is plugged into computer and run Reboot_EDL.cmd phone will reboot to a black screen.
2. Make sure device installed on computer as Qualcomn 9008 device as EDL.jpeg shows and note the com port number.
3. Run Recover_System.exe you will have to input your com port number it should tell you the com number in command prompt dialog at the top.
- If it does not tell you you are probably not connected correctly.
4. Enter the number when it ask you not the COM letters just the number.
- The process will take awhile and may seem to hang for a few minutes just let it go unless it hangs for hours.
5. When process complete on command window force reboot to Download Mode using combo (Bixby + Volume Down + Power @ Same time).
6. In odin flash BL_ENG_BOOTLOADERS_G950U_V2/V5.tar.md5 based on your bootloader version.
7. Boot into safestrap and wipe data.
8. Reboot.
SAFESTRAP:
1. Extract the system.img from the EDL 7z file and push to sdcard.
2. Reboot to safestrap recovery.
3. Go to install section and select img, choose the system.img from the file picker.
4. Flash to system.
5. Wipe data.
6. Reboot.
Downloads:
Android File Host
Thanks to:
@jrkruse & @klabit87 for all kinds of stuff.
@Kamrys for the V5 EDL files.
@me2151
@partcyborg
@elliwigy
@tytydraco
@mweinbach
@SamGuy2020
@SuperR. for SuperR's Kitchen
@Chainfire For SuperSU.
@Stericson For BusyBox.
Samsung for the locked bootloader.
me.
mine
V2 not tested as Im on V5 bootloader
Safestrap? What's this?
Sent from my Samsung Galaxy S8 using XDA Labs
SuperSandro2000 said:
Safestrap? What's this?
Sent from my Samsung Galaxy S8 using XDA Labs
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s8/development/recovery-locked-nougat-7-0-safestrap-t3772760
Do we have to follow from step 1 and then flash rom?
Or we can boot into safestrap and flash TWRP as I already have EDL safestrap as per Jrkruse post
Thanks
MalharB said:
Do we have to follow from step 1 and then flash rom?
Or we can boot into safestrap and flash TWRP as I already have EDL safestrap as per Jrkruse post
Thanks
Click to expand...
Click to collapse
folow from step 1.
if you want flashable zip from safestrap recovery its uploading and will post the instruction when finished.
Will be giving this a whack once the safe strap versions up im on revusion 2 as well
Sounds cool, just when things was getting boring for the s8, OP, just curious how did you deodex your framework, I have been able to deodex with assyad kitchen but will only boot with the boot folder in framework?
sawixso81 said:
Sounds cool, just when things was getting boring for the s8, OP, just curious how did you deodex your framework, I have been able to deodex with assyad kitchen but will only boot with the boot folder in framework?
Click to expand...
Click to collapse
Im trying to remember what cyborg did his is deodexed
TheMadScientist said:
Im trying to remember what cyborg did his is deodexed
Click to expand...
Click to collapse
Last I remember he still had the arm folders in his Rom he gave me the info on assays kitchen(Not sure if I spelled it right). I've also seen s8+ roms(cough cough) that were fully deodexed and no arm folders even ran it on my s8 once but the resolution was too small for me lol.
Also got your pm but nothing was in there lol
sawixso81 said:
Sounds cool, just when things was getting boring for the s8, OP, just curious how did you deodex your framework, I have been able to deodex with assyad kitchen but will only boot with the boot folder in framework?
Click to expand...
Click to collapse
I made this ROM long time ago, I remember that I used superR's kitchen!
Will check later.
afaneh92 said:
I made this ROM long time ago, I remember that I used superR's kitchen!
Will check later.
Click to expand...
Click to collapse
Appreciate it:good::highfive::good:
sawixso81 said:
Last I remember he still had the arm folders in his Rom he gave me the info on assays kitchen(Not sure if I spelled it right). I've also seen s8+ roms(cough cough) that were fully deodexed and no arm folders even ran it on my s8 once but the resolution was too small for me lol.
Also got your pm but nothing was in there lol
Click to expand...
Click to collapse
Its been doing that. Said i was gonna try it sometime this weekend. Been having weird no signal issues i believe is related a baseband issue if i reboot be3n taking upto 5 min to get signal. I did a lot of blind tweaks after my last weeks reset and thinking i did something wrong
---------- Post added at 06:16 PM ---------- Previous post was at 06:10 PM ----------
Um i know we dont really talk about telegram much any more but i got a semi private group with a few well known fellars but if any of you where to join you could probably ask cyborg or a few others for tips. It can be off topic a lot. And be quiet but the idea i had was to pretty much gather up as many devs and legit sources on unlocking and other mobile related services and have a big collaboration group. We all talk dev related everynow and then
But if any of you want to join your more than welcome
TheMadScientist said:
Its been doing that. Said i was gonna try it sometime this weekend. Been having weird no signal issues i believe is related a baseband issue if i reboot be3n taking upto 5 min to get signal. I did a lot of blind tweaks after my last weeks reset and thinking i did something wrong
---------- Post added at 06:16 PM ---------- Previous post was at 06:10 PM ----------
Um i know we dont really talk about telegram much any more but i got a semi private group with a few well known fellars but if any of you where to join you could probably ask cyborg or a few others for tips. It can be off topic a lot. And be quiet but the idea i had was to pretty much gather up as many devs and legit sources on unlocking and other mobile related services and have a big collaboration group. We all talk dev related everynow and then
But if any of you want to join your more than welcome
Click to expand...
Click to collapse
Yeah, I've had some issues as well with Wi-Fi passwords and Bluetooth not keeping its settings, never happened on V2 bootloader, not a deal breaker for me more of an annoyance than anything. Let me know what you think of that mod pack when you get a chance its pretty cool:good::highfive::good:
sawixso81 said:
Yeah, I've had some issues as well with Wi-Fi passwords and Bluetooth not keeping its settings, never happened on V2 bootloader, not a deal breaker for me more of an annoyance than anything. Let me know what you think of that mod pack when you get a chance its pretty cool:good::highfive::good:
Click to expand...
Click to collapse
So thats a xposed issue. There is a fix by modding a couple files somewhere. Since i dont run xposed i havnt faced it. I run a stock rooted that i tweak on my own. I havnt used cyborgs rom in a while due too a feww needed,debloated features. One was being bluetooth losing parings... I swapped over to this right before the fix was found and havnt bothered to try it but others said it works great. Me and several others came across the fix on xposed github. But since then its been posted a few places including some page on cyborgs many
---------- Post added at 06:33 PM ---------- Previous post was at 06:26 PM ----------
https://github.com/rovo89/Xposed/issues/294
https://forum.xda-developers.com/showpost.php?p=77055209&postcount=4
One of the fixxes but gives you the jist of it.???
TheMadScientist said:
So thats a xposed issue. There is a fix by modding a couple files somewhere. Since i dont run xposed i havnt faced it. I run a stock rooted that i tweak on my own. I havnt used cyborgs rom in a while due too a feww needed,debloated features. One was being bluetooth losing parings... I swapped over to this right before the fix was found and havnt bothered to try it but others said it works great. Me and several others came across the fix on xposed github. But since then its been posted a few places including some page on cyborgs many
---------- Post added at 06:33 PM ---------- Previous post was at 06:26 PM ----------
https://github.com/rovo89/Xposed/issues/294
https://forum.xda-developers.com/showpost.php?p=77055209&postcount=4
One of the fixxes but gives you the jist of it.
Click to expand...
Click to collapse
Strange as I don't have exposed hell I might have the framework there but not the installer app I'll have to take a peak.
So yeah no xposed in my framework folder.
Also forgot to mention this is my personal BRB1 build deodexed with root
you need to post better noob friendly instructions on how to do this. got my phone to safestrap and did everything your instructions say once i pass step 8 and reboot phone just stays on a black screen and a blue light at the top left of the device stays on, also when i plug the device into the computer i can hear it connect.
tooflyco said:
you need to post better noob friendly instructions on how to do this. got my phone to safestrap and did everything your instructions say once i pass step 8 and reboot phone just stays on a black screen and a blue light at the top left of the device stays on, also when i plug the device into the computer i can hear it connect.
Click to expand...
Click to collapse
What ROM you was on? Bootloader ver?
afaneh92 said:
What ROM you was on? Bootloader ver?
Click to expand...
Click to collapse
i'm on stock ROM here's my build number G950USQU5CRK1. bootloader v5