[Q&A][FAQ][SAC23] [N3][Sacs_Andro]FAQ, Q&A and User Guide for Sac23 ROM's - Sprint Samsung Galaxy Note 3

This is the first of many guides I will be posting and keeping up with.
It will be utilized for Q&A FAQ and HOW TO so we can keep the development thread for development purposes.
Post your questions and Myself or other knowledgeable users of Sac23 ROMS will answer as quickly as possible.
So ......
FAQ:
what do i do if its not booting on start up A- pull battery then restart.(IF YOU HAVE A REMOVABLE BATTERY)
after booting im getting a services have stopped wait or close A- pull the battery and restart.(IF YOU HAVE A REMOVABLE BATTERY)
the tweaks open then close help? A- need to deny super user for it then go in and change what u want then re enable superuser for it
how to install
install like u would any rom then wait for 2 min ( if wont boot )
pull battery and restart then you'll see optimizing apk's count down.(IF YOU HAVE A REMOVABLE BATTERY)
***Guys This Is A Port So remember it will have small glitches here and there but all in all should be stable ***​
For starters HOW TO INSTALL a ROM by SAC23
Installing with TWRP (View All Supported Devices>>> Find TWRP for your device):
Philz can be used and I will post instructions for it later https://www.mediafire.com/folder/qc3z1c59s8g03/PHILZ
This assumes that you ALREADY have TWRP Recovery installed on your phone and you know how to use it.
Download the ROM of choice...move it onto the EXT SD CARD.
VERY IMPORTANT>>> Move all music, pics, important data from internal storage to the ext SD card and/or to your pc, etc. because during this process, the internal will be completely erased.
Recommended Method to Flash SACS Custom ROMS using TWRP
Boot into TWRP
Select Wipe > Advanced Wipe
Select Dalvik, System, Data, Internal Storage, and Cache. Swipe to Wipe (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Select Format Data, Type YES, Press GO. (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Swipe to Factory Reset. (do this THREE TIMES)
Go back to MAIN menu and STOP HERE !!!!! READ NEXT STEP CAREFULLY....
[*]Select REBOOT INTO RECOVERY mode and Swipe to Install Super User. DO NOT REBOOT INTO SYSTEM!
[*]AFTER THE PHONE REBOOTS INTO RECOVERY:
NOW proceed with installing The ROM
Select Install Zip, Drill down to Sac23's Rom you want to flash, and Swipe to install.
Follow on screen instructions (if there are any).
When prompted, REBOOT SYSTEM.
THE FIRST BOOT WILL TAKE A MINIMUM OF 20 MINUTES..... SOME DEVICES EVEN LONGER...
.
.
HAVE PATIENCE
When the Home Screen appears and it is obvious that the install has completed, allow the phone to settle for another 10 minutes BEFORE you begin setting up your personal preferences and accounts.
If everything seems normal, set your phone up and profit.
IF IT WON'T BOOT....(IF YOU HAVE A REMOVABLE BATTERY)...try pulling battery and replacing battery then restart phone and you should see "Android Updating"
After setting up your personal info and you are now ready, the first thing you should always do after flashing any ROM is to go to settings, system updates, and refresh/update your PRL & PROFILE then reboot the phone. Second thing is go to settings, more networks, mobile networks, network mode, and select LTE/CDMA.

[LINKS] sac23_Norma_lollipop_port_ for N3 MIRRORS
OP HOST FILE LINK VER 2
MY 1st MIRROR HOST FILE LINK VER 2
MY 2nd MIRROR HOST FILE LINK VER 2 COMING SOON
VER 2 MD5 COMING SOON
OP HOST FILE LINK VER 1
MY 1st MIRROR HOST FILE LINK VER 1
MY 2nd MIRROR HOST FILE LINK VER 1
VER 1 MD5 7bf1e578eee4f63a938ad3a413b33962

saved 2
reserved for future use

saved 3
reserved for future use

saved 4
reserved for future use

saved 5
reserved for future use

thanks for this

Anyone know where I can get the nk4 modem?

http://forum.xda-developers.com/note-3-sprint/general/baseband-modem-nk4-odin-flashable-t2996639

Cowboysfan323 said:
Anyone know where I can get the nk4 modem?
Click to expand...
Click to collapse
Here is the nk4 tar file ready for odin..
https://www.dropbox.com/s/m8w3yj9y2ax7xe4/modem.bin?dl=0

Josephigloe said:
Here is the nk4 tar file ready for odin..
https://www.dropbox.com/s/m8w3yj9y2ax7xe4/modem.bin?dl=0
Click to expand...
Click to collapse
Thanks. i was still download the full rom just for the modem

Does Hotspot work on this?

Josephigloe said:
Here is the nk4 tar file ready for odin..
https://www.dropbox.com/s/m8w3yj9y2ax7xe4/modem.bin?dl=0
Click to expand...
Click to collapse
Ty.

here my findings :
- WIFI is not connecting after a full wipe.. not working after a dirty flash.
- The video on the OP shows the toolbox working but the icon is missing?
- On the pulldown under the date all of the text is Chinese
- when music is on , Sound management still have Chinese text on the pulldown notification
some other reports are :
- Calling other N3 sound is like a voice change

gabesir said:
here my findings :
- WIFI is not connecting after a full wipe.. not working after a dirty flash.
- The video on the OP shows the toolbox working but the icon is missing?
- On the pulldown under the date all of the text is Chinese
some other reports are :
- Calling other N3 sound is like a voice change
Click to expand...
Click to collapse
confirming all the above ( in case it helps )
also the settings button in pulldown only opens date / time settings ( unless for some reason that is normal for loli? )

Cowboysfan323 said:
Ty.
Click to expand...
Click to collapse
I don't know if you know but you don't flash in ap either you have to flash in like Csc I think it is.

gabesir said:
here my findings :
- WIFI is not connecting after a full wipe.. not working after a dirty flash.
- The video on the OP shows the toolbox working but the icon is missing?
- On the pulldown under the date all of the text is Chinese
- when music is on , Sound management still have Chinese text on the pulldown notification
some other reports are :
- Calling other N3 sound is like a voice change
Click to expand...
Click to collapse
Lol its Korean but agree with those issues. I also noticed when I reboot from recovery it gets stuck on the boot animation. Not always but most of the time.
---------- Post added at 11:42 AM ---------- Previous post was at 11:40 AM ----------
Dalek_Caan said:
confirming all the above ( in case it helps [emoji14])
also the settings button in pulldown only opens date / time settings ( unless for some reason that is normal for loli? )
Click to expand...
Click to collapse
Try tapping to the right a little more. It will open settings.
Edit: Well it was for me until I tried it again lol.

Josephigloe said:
I don't know if you know but you don't flash in ap either you have to flash in like Csc I think it is.
Click to expand...
Click to collapse
Didn't know that.

I've downloaded and flashed this rom multiple times. I cant get past the wifi on the initial setup
I set my ip to static ionnected to wifi and let me go through the setup

quoshon said:
I've downloaded and flashed this rom multiple times. I cant get past the wifi on the initial setup
Click to expand...
Click to collapse
Try turning the wifi off at the top right of the screen. It will skip the setup.
Ive also received a phone call and I was not able to answer it. Phone fc'd on me

Related

[ROM] [9.10.2011] MIUI 1.9.3.0 - Language Packs added

THIS IS NOT MY ROM! I AM NOT RESPONSIBLE FOR IT NOR FOR WHAT IT DOES TO YOU OR YOUR PHONE! I’M JUST POSTING A CLEAR WAY OF INSTALLING IT BASED ON MY EXPERIENCE!
This based on Chinese MIUI @ http://www.miui.com/thread-249796-1-9.html
ROM is very smooth and stable, I've been waiting for an MIUI that could be my day2day ROM.
Features:
• No Data Disconnection Problems
• Torch is working
• Camera with flash
• So far everything basically!
Except (Not working):
• Wifi Tethering
If you have data disconnection problems, check this guide: http://forum.xda-developers.com/showthread.php?t=1286309
Language Pack:
Thanks to [email protected] (http://android.modaco.com/topic/346007-miui-language-pack-collection-rom-patch/)
http://www.mediafire.com/?l9sn911dom9fgs9
WARNING: Will reset the language of UI to Chinese, I will fix this and re-upload tonight, but for now you can select menu on the launcher then settings, go to the second tab, then on the lower group of settings you'll find a keyboard icon, click it then select the second option which is the "Select Language" menu, you can then change to English again.
I have modified the build.prop file so that the default language is English:
[PLEASE DO NOT MIRROR THESE FILES]
ROM + Boot Unlock Files: https://rapidshare.com/files/1882170718/miui_X10i_1.9.30_luke1215_2.3.English.zip
http://www.mediafire.com/?2got7wau1dv2ci3
Hot Fix 2 File: https://rapidshare.com/files/3177852288/1930-hotfix2.zip
http://www.mediafire.com/?9oz1defkjuvodud
Hot Fix 3 File: https://rapidshare.com/files/1523740939/1930-hotfix3.zip
http://www.mediafire.com/?96ahm47lr7hcd6z
Instructions:
• Download FlashTool_0.2.9.1-GBready_root_xRec from here http://forum.xda-developers.com/showthread.php?t=1196421
• Download Generic version 2.1update1 build 2.1.A.0.435 from here http://forum.xda-developers.com/showthread.php?t=920746
• Extract Both files.
• Place the ftf file from Generic version 2.1update1 build 2.1.A.0.435 in the firmwares folder of the flashtool.
• Make sure USB Debugging is enabled in your ROM.
• Run Flashtool and connect your phone.
• Select Flash and select the Generic version 2.1update1 build 2.1.A.0.435 firmware. (this will erase all your data from your phone, you better have taken a backup that you could restore later on)
• Follow the on-screen steps until you boot into Generic 2.1 from SE.
• Close FlashTool.
• Extract the ROM + Boot Unlock Files archive.
• Place the miui_X10i_1.9.30_luke1215_2.3.zip on your phone’s SD card
• Place the hotfix files on your phone’s SD card.
• Place the X10i_1.9.30_Luke1215-Miui-2.3.5.ftf file in FlashTool’s firmwares folder.
• Extract the qsd8250.7z from the ROM + Boot Unlock Files archive.
• Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=1253277 until it says bingo
• Run flashtool again and flash luke’s kernel via FlashTool. (it should be available now)
• Boot into CWM recovery by pressing back button as soon as you see the Sony Ericsson logo on your phone’s screen.
• Select wipe data/factory reset.
• Select advanced then wipe dalvik cache.
• Select install zip from sdcard then select miui_X10i_1.9.30_luke1215_2.3.zip
• Select hotfix 2 then hotfix 3.
• Reboot!
Do you have to do aaaall of those steps if you already have an unlocked bootloader with doomkernel?
EDIT: Figured it out myself lol. If you have an unlocked bootloader already you only have to go through these steps:
• Run flashtool again and flash luke’s kernel via FlashTool. (it should be available now)
• Boot into CWM recovery by pressing back button as soon as you see the Sony Ericsson logo on your phone’s screen.
• Select wipe data/factory reset.
• Select advanced then wipe dalvik cache.
• Select install zip from sdcard then select miui_X10i_1.9.30_luke1215_2.3.zip
• Select hotfix 2 then hotfix 3.
• Reboot!
Click to expand...
Click to collapse
Does WiFi teathering works with this Rom???
Sent from my X10i using xda premium
How to fix permissions with cwm? I've got problems with market fc's.
ok, first bug report after about an hour of slight use:
- market force closes often. But I was able to install superuser and titanium backup Solution: Probably will be solved if permissions are fixed via recovery or maybe installing version 3.1.6 will work (3.1.3 is installed)
- pre-installed superuser doesn't work correctly all the time. Solution: Download superuser from the market. Works perfectly after that.
Otherwise no problems by now. I think this ROM can become quite awesome since the only bugs I found by now should be very easy to fix.
God dam*it the market FC's ALL THE TIME! :S
a1exander said:
God dam*it the market FC's ALL THE TIME! :S
Click to expand...
Click to collapse
no fc for me.
download rom manager v4.5.0.1 in menu you can fix permissions
Market is working fine for me.
This one also data bug. Please remove this.
Why it says no data bug?
Test it by switching to only 2g and back to 3 g. No godd...data connextion.
noob question..
where can i get X10i_1.9.30_Luke1215-Miui-2.3.5.ftf?
Dowload the .zip fileon first page and extract it, inside you will find all needed files including .tft
chauhanjayc said:
Does WiFi teathering works with this Rom???
Sent from my X10i using xda premium
Click to expand...
Click to collapse
No, Doesn't work!
robertberma said:
This one also data bug. Please remove this.
Why it says no data bug?
Test it by switching to only 2g and back to 3 g. No godd...data connextion.
Click to expand...
Click to collapse
Not for me, I don't have data disconnection problems, perhaps you should check this out: http://forum.xda-developers.com/showthread.php?t=1286309
You can edit build.prop according to this guide, let me know if it fixes your problems, if it does i'll create an update zip for easy flashing.
Is it possible to make a version flashable by xRecovery? Thanks
Phhh! Why xrec? Now we have cwm. FXP uses Cwm and all others could do it now also, since we have doomkernel which is compatible with mostly all the roms, and there you have xrec, cwm 4 and 5 included. So, why do you want to have xrec version?
sika68 said:
Is it possible to make a version flashable by xRecovery? Thanks
Click to expand...
Click to collapse
I made this one for xrecovery
U can try it if u want.
http://www.mediafire.com/?mqq92ly888lhn8z
gm007 said:
I made this one for xrecovery
U can try it if u want.
http://www.mediafire.com/?mqq92ly888lhn8z
Click to expand...
Click to collapse
Perfect. Thanks
For anyone with Market FC , Read this.
I had lots of Market FC, I was still able to install apps from the Market website so I tired to install superuser to see if it fixed it. It worked for the guy above but not for me. So I downloaded the market from http://www.redmondpie.com/android-market-3.1.3-apk-download/ and just copied it over to sd card, installed just from the file explore and boom it works. hope i could help anyone else out!
now all we need is a Wifi tethering fix
zoz33 said:
Not for me, I don't have data disconnection problems, perhaps you should check this out: http://forum.xda-developers.com/showthread.php?t=1286309
You can edit build.prop according to this guide, let me know if it fixes your problems, if it does i'll create an update zip for easy flashing.
Click to expand...
Click to collapse
Did you test it by switching to only 2g and then back to only 3g. I bad you do not have data connection.
Please test before you say you do not have problems because if your data does not drop out you right there is no problem. Only trouble begins if your lost signal and it will not reconnect.
Please report after test.
Build.prop i try, no luck.
---------- Post added at 10:59 AM ---------- Previous post was at 10:57 AM ----------
bimmerrob said:
For anyone with Market FC , Read this.
I had lots of Market FC, I was still able to install apps from the Market website so I tired to install superuser to see if it fixed it. It worked for the guy above but not for me. So I downloaded the market from http://www.redmondpie.com/android-market-3.1.3-apk-download/ and just copied it over to sd card, installed just from the file explore and boom it works. hope i could help anyone else out!
now all we need is a Wifi tethering fix
Click to expand...
Click to collapse
And data bug fix. proper fix
robertberma said:
Did you test it by switching to only 2g and then back to only 3g. I bad you do not have data connection.
Please test before you say you do not have problems because if your data does not drop out you right there is no problem. Only trouble begins if your lost signal and it will not reconnect.
Please report after test.
Build.prop i try, no luck.
---------- Post added at 10:59 AM ---------- Previous post was at 10:57 AM ----------
And data bug fix. proper fix
Click to expand...
Click to collapse
I think data will only be fixed when we get the official CM update.so we can have wifi and data working together
Sent from my SO-01C using Tapatalk
pretty good rom, I haven't tried the data yet but everything else seems to be good.
one small issue is the standby/bright screen issue

For users having difficulty installing ResurrectionV1.1_official_remix_ics_4.0.3_XXLP

This is a more detailed edited version of how to install the Resurrection ROM by westcrip...
as have seen too many users that seem to be skipping parts or confused of the installation.
This is also for users like myself, who just started on this site and can't post on Development side to find their answers.
BACKUP your apps of course...but DO NOT backup system data.Repeat!! DO NOT BACKUP SYSTEM DATA. Restoring system data can give you some problems because if you don't know what you're doing, can accidentally replace something from the fixes that screws things up!
-----------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------
PART-1
Rom Installation (you MUST follow these steps! )
**Go to recovery mode( Vol UP + Power+ Home and hold until the Samsung Galaxy screen comes on)
1- Wipe data / Factory reset then (can Wipe cache partition or go straight to)
Install ResurrectionV1.1_official_remix_ics_4.0.3_XXLPE_FULL-WiPE.zip
*if you did not Wipe cache, can go straight to install from cache...
but if you Wiped cache then you go to install from external SD card and install 1.0_CWM.zip (this will be touch version)...
then choose - install zip from sdcard. - choose zip from sdcard. Scroll down to Download folder and select ResurrectionV1.1_official_remix_ics_4.0.3_XXLPE_FULL-WiPE.zip.
Please wait a moment.
2-Install gapps_for_remix_v1.1.zip
3-Install gapps_fixer.zip then go back and go to Advanced.
4-Wipe dalvik cache (required)
and Fix permissions and go back to
5-Reboot system
(at this stage it may take a while for first bootup, because we have wiped cache. It needs to rebuild it, so don`t panic.
It may take a while *average around 3-5min before getting to Installing applications screen)
At this stage, boot to system and configure the phone (change language settings, etc).
When finished, again reboot into recovery and follow PART-2
PART-2 (required)
This part it's mandatory here are contained the language, theme, AOSP apps and the T9 dialer if you want it...
or use default. ONLY install one of these:
*note: you're in regular CWM using up and down volue + power button to enter.
If you want the touch - reinstall it like before.
1.- Install the SMSfixupdate-afterboot+T9 Dialler.zip
or
SMSfixupdate-afterboot+default remix dialler.zip
go back
2.- Reboot into system
After finishing the boot it's highly probably that you receive a force close from android phone.
It's normal and it's the only FC that you should get.
Enjoy!
**There is a RAM Manager Fix (When you open the Task Manager app, there's a section called RAM and a button to Clear Memory.
The fix enables that button again... for those not working).
Here is a mirror link for this and other files: RAM Manager Fix and others
PART-3 (optional)
*This can apply to many other files you want to flash.
If you want to install Siyah kernel:
Place Siyah-v3.0rc4-CWM.zip (or whichever version you're using) in the root of internal SDcard memory ("download" folder) and go to recovery mode (Vol Up + Power + Home).
Go to Install zip from SDCard... and select it.
Yes and install... Fix permissions... Reboot.
**battery issues with Siyah?
go to recovery
wipe dalvik
go to "kernel specific options" to reset them or other performance tweaks.
reset kernal
fix permission
reboot
**No more video player?
Get the VideoPlayer.apk file (*have to do a search for it now until I find another working link to it)
and copy it to system/app using something like Root Explorer
Reboot
Hope this helps. I'll edit this when I have time (usually busy with other projects).
*Version 1.2 is out now Check it here.
Good job
Tho make sure you spend a bit of time regularly checking the thread (depending on how much action the thread gets, obviously). Once you make threads like these people invariably ask questions & it's best if the person who detailed the method answers most of them.
Thank you sir.
I will give as much time as I can on this, when questions come up... and I'll be sure to keep up with bugs going on on original thread... though they will be updating this ROM soon to 4.0.4.
When that happens, guess will have to update this lol.
(oh no, what have I gotten myself into )
Language problem
Hello!
Thanks for the thread, really useful for noobs needing help to fix some problems.
I am a noob... and I have a problem.
Everything is working fine, battery is ok, no fc... but language seems to be messed up, I get my language (spanish) in almost all settings and menus, but dialer is invariably in english. Some contacts dialogs show this behaviour too.
Thank you very much in advance!
Thanx a lot, really useful...cant wait for 1.2
SMSafter-reboot is the only fix i needed to fix my dialer fcs issue, after a dalvik cache clean and permission fixing. That was the only way, if some1 has same issue.
Sent from my GT-I9100 using XDA
Hi Miguel. The ROM is mostly for English and some language settings are off here and there. Mine too shows Chinese characters in some parts. I think this has to do with where the phone is originally from.
Version 1.2 will be out soon (based on 4.0.4) and should have more bugs fixed. I will see if there's anything can be done to help you with Spanish settings.
*glad it's helpful for you guys.
Thanks for a good simple guide.... it is getting pretty difficult to find answers with so many posts in the main thread.
Will you be making a similar step by step guide for ver 1.2 that should be out soon?
If it is needed I will. Will have to wait for it to come out and see if instructions changed. The process will be easier (after what westcrip said), not needing to add gapps fix, etc now I think.
Anyways, if I think needs more detail for newer users, I'll add a new thread for it and post a link here to it too.
Which dialler
I'm a true noob and I'm rooted with CWM installed and I'm giving serious consideration to this rom. My only question at this point is what are the differences btw the 2 diallers and do most folks prefer one over the other?
Hi tlmacson. It's a very good fast and smooth rom with good support. 1 dialer gives you T9 abilities... which means when you start dialing some number, it shows you contact(s) that much those numbers.
But there are some bugs in it not working for some, so recommended to install the default one and add some other app that does the same, or install T9 on after the default.
PS
If you want to give this ROM a try... the new 1.2 version will be out any moment which should have easier installation with hopefully less bugs ^^
I have been using it for a few weeks now. It has run really smooth, the only bugs are very small and do not effect the use of it daily.
I had a few problems with the dialler, so I installed exDialler. I actually prefer it, it has t9 searching and can be skinned to look like ics dialler.
I will definatly give ver 1.2 of the rom a try too.
Yes, that's the 3rd party app people like for T9 use: exDialer
It also allows you to give it black theme.
HELP!
Cyber i'm wondering if you did test the 1.2 PRO resurrection I want to upgrade to it but i don't know if it is a FULL WIPE or not because westscript didn't mention it also there are no GAPPS and FIXER within the thread can you please confirm for me this?
I think that I may just do that since I'm not having any real issues with the leaked "stock" XXLPQ. I appreciate your advice and dialer explanation.
nHorus - For v1.2 it works better if you do a full wipe Do a full wipe(factory reset+cache+dalvik cache), though you can try without it.. and just do the factory reset. Then install ROM and Siyah kernel and reboot to do initial setup. Then comeback to recovery mode and install navigation button fix and app themes, reboot.
Test
Thank you cyberboob.
I will try 1.2 and see how it goes, anyway I will install exDialer to fix my languages "problems" (it is not a dealbreaker but is disturbing seeing some dalogues in other language).
According to 1.2 changelog this version is promising.
cyberboob said:
nHorus - For v1.2 it works better if you do a full wipe Do a full wipe(factory reset+cache+dalvik cache), though you can try without it.. and just do the factory reset. Then install ROM and Siyah kernel and reboot to do initial setup. Then comeback to recovery mode and install navigation button fix and app themes, reboot.
Click to expand...
Click to collapse
thank you. i'll try without the wipes
Sorry.. a full wipe is needed again (or more bugs will be present).
Follow these steps:
Do a full wipe(factory reset+cache+dalvik cache)
Install the Main ROM
Install Siyah-v3.0.1-CWM.zip
Reboot
Do the initial setup of things
Go back to CWM and install navigation button fix
Reboot
Then go back to CWM and install app themes (there are some bugs, but if you want the black themes, then install classic first, then black)
Reboot
Some people have other issues after, but see how this goes.
I would change the DPI settings to 184 or 210 for everything to work fine from market apps.
*Also westcrip will post a new fix update for some new bugs reported by some users.
cyberboob said:
nHorus - For v1.2 it works better if you do a full wipe Do a full wipe(factory reset+cache+dalvik cache), though you can try without it.. and just do the factory reset. Then install ROM and Siyah kernel and reboot to do initial setup. Then comeback to recovery mode and install navigation button fix and app themes, reboot.
Click to expand...
Click to collapse
I know I'm showing my "noobness" but I thought that the kernel was part of the ROM; so how do I install the kernel after the ROM?
Same way you installed the main ROM.. go into recovery mode and select the folder you placed it in (usually internal sd card "download" folder) and flash it "yes". Fix permissions if want and reboot. Same with anything else you need to flash/CWM after/before.

Galaxy Ace 2 i8160 - Custom ROM for ZSLG1/ZSLK2 baseband(UPDATED V3)

NOTE:
This will be my last GB rom since sources for Galaxy S Advance has been released, I'll by making a JellyBean port of the SGSA to the Ace 2. Unless Sammy releases JB to our phone. I'm also going to buy Galaxy S Advance or the Galaxy S III mini(not available yet here in HK execpt the parallel ones and in expansys.com.hk) to replace my Ace 2.
Introduction:
First of all, I made this ROM specifically for the Galaxy Ace 2 GT-I8160 with a baseband of ZSLG1/ZSLK2 which is from Hong Kong.
The reason I made this ROM started with a severe scrolling problem with all Galaxy Ace 2 here in Hong Kong installed with the I8160ZSLG1 firmware, scrolling continuously is not possible because as soon as you scroll while the menu list is still moving or scrolling, touchscreen becomes unresponsive, unless you re touch the screen. this ROM has no BusyBox installed, its just a stock ROM with same UI, same funtionality
UPDATE V3:
Sorry for the late responses. I've been busy working here in my company. Anyway, this will be my last GB rom since sources for Galaxy S Advance has been released, I'll by making a JellyBean port of the SGSA to the Ace 2.
Original Stock ROM I8160ZSLK2(Hong Kong)
GT-I8160V3
Link to Stock XXLK7 Kernel with CWM and init.d support
List of Changes:
NEW
-based on I8160XXLK7
-permanent removal of CPU rendering, uses GPU rendering by default.
-init.d support
--place your favorite init.d tweaks inside /system/etc/init.d
-busybox 1.19.4/ZipAlign/Sqlite3(compatible with the newest Supercharger V6)
-deleted some unneeded files from lib folder.
Recent Changes
-all language files are for UK, so there's no chinese, but if you know english, that would be fine
-multi tap alphanumeric keypad bug fixed
-scrolling bug fixed
-STOCK UI(Same functions, same look and feel)
-Zipaligned APK's before packing
-Deodexed
-Rooted
-disabled ScrollingCache for smooth scrolling(modified framework.jar, not a build.prop tweak)
-disabled all camera sounds including autofocus
-Samsung bloatwares REMOVED
NOTE:
It is recommended to flash the kernel from the link provided above.
Installing instructions:
-make a backup of your phone
-flash the stock ZSLK2 firmware
-flash the kernel from the link provided above
-format /data, /cache and /system(THIS WILL DELETE ALL YOUR SETTINGS AND DATA)
-wipe dalvik cache
-wipe battery stats
-unmount all volumes
-flash the ZIP file and wait it to finish
-reboot(startup takes long time since dalvik is being rebuild)
-when booting is done, setup your phone, language, time, etc.
-before installing apps, reboot phone
-then you can start installing your apps
NOTE:
-Kies over Wifi is removed, clicking on it from the menu will force close the settings application.
-Don't attempt to flash this ROM to a different baseband, your phone will still work but you will not have a GSM/3G/Network signal.
WARNING APPLIES ONLY TO V1 and V2:
WARNING: BusyBox is partially supported using the busybox installer, however, there are many chances that it will make your device bootloop.
Version 2:
Original Stock ROM ZSLG1(Hong Kong)
GT-I8160V2
XXLI2 stock kernel
Version 1:
DOWNLOAD:
CWM_flashable_ROM
all credit goes to dsixda for the android kitchen
sorry, dumb question again.
in cwm menu, i don't see option to unmount volume, so how could i do that??
edit: found it in "mount and storage", sorry.
Everything seems running just fine, but the battery graph seems broken (gaps in between) in battery status??
---------- Post added at 11:28 PM ---------- Previous post was at 11:14 PM ----------
and the chinese character in your rom is simplied chinese (GB) while i use tradional chinese (BIG5).
Could you list the files responsible for those tradional chinese chars and i put it back to system via sort of root explorer??
Thank you.
How do we flash the stock rom back ? Do i need to wipe cache again and stuff?
And what do i choose in odin? cuz the file is just one.. and it asks for bootloader and etc?
Bocko92 said:
How do we flash the stock rom back ? Do i need to wipe cache again and stuff?
Click to expand...
Click to collapse
The stock rom provided here is for flashing with odin (select "pda" in odin, and select the .tar file)
I'm not sure if it is needed for odin, but if you flash rom with clockwork mod, then wipe /data, /system, and /cache is a must. just as the instruction stated, wipe these 3 partitions, then format it and umount them.
Bocko92 said:
And what do i choose in odin? cuz the file is just one.. and it asks for bootloader and etc?
Click to expand...
Click to collapse
In odin, select pda and then select the .tar file you downloaded. DO NOT touch anything else. then click start.
** Please correct me if I'm wrong. **
xmlnoob said:
Everything seems running just fine, but the battery graph seems broken (gaps in between) in battery status??
---------- Post added at 11:28 PM ---------- Previous post was at 11:14 PM ----------
and the chinese character in your rom is simplied chinese (GB) while i use tradional chinese (BIG5).
Could you list the files responsible for those tradional chinese chars and i put it back to system via sort of root explorer??
Thank you.
Click to expand...
Click to collapse
doesn't seem to have the battery problem on me though, take a look at the screenshot, for the languages, sorry I think its from the CSC files, you can try flashing a CSC provided on my original ROM, but I don't know what effect does it have when flashed, I didn't add any language since I don't read chinese, thou I live here in Hong Kong
anyway, I'll try extracting the language traditional chinese and will make a CWM flashable file.
Anyway, the reason why I have low battery life is I use
CPU Governor: performance(only at 800Mhz - no deep sleep, no downclock, CPU always at 800Mhz full speed)
I/O Scheduler: noop
results? no lags in UI or browser. but battery last only 1 day, than 2days using default CPU settings.
kevincaja said:
doesn't seem to have the battery problem on me though, take a look at the screenshot, for the languages, sorry I think its from the CSC files, you can try flashing a CSC provided on my original ROM, but I don't know what effect does it have when flashed, I didn't add any language since I don't read chinese, thou I live here in Hong Kong
anyway, I'll try extracting the language traditional chinese and will make a CWM flashable file.
Anyway, the reason why I have low battery life is I use
CPU Governor: performance(only at 800Mhz - no deep sleep, no downclock, CPU always at 800Mhz full speed)
I/O Scheduler: noop
results? no lags in UI or browser. but battery last only 1 day, than 2days using default CPU settings.
Click to expand...
Click to collapse
Yea, i think the gap is actually the period of hard reboot, so its a false alarm The graph is ok without reboot.
regarding cwm flashable langauge file, i dont need to wipe data/ factory reset for that i assume?
Thank you.
---------- Post added at 08:21 PM ---------- Previous post was at 08:13 PM ----------
And by the way, the phone number(caller id??) format is now showing XXX-XXX-XX, can i edit it to show XXXX-XXXX or XXXX XXXX ??
xmlnoob said:
Yea, i think the gap is actually the period of hard reboot, so its a false alarm The graph is ok without reboot.
regarding cwm flashable langauge file, i dont need to wipe data/ factory reset for that i assume?
Thank you.
---------- Post added at 08:21 PM ---------- Previous post was at 08:13 PM ----------
And by the way, the phone number(caller id??) format is now showing XXX-XXX-XX, can i edit it to show XXXX-XXXX or XXXX XXXX ??
Click to expand...
Click to collapse
no need to wipe, just flash the CWM zip file, the caller ID is a feature of the Indonesian firmware, so we either have to edit some framework or apk's which will take sometime
kevincaja said:
no need to wipe, just flash the CWM zip file, the caller ID is a feature of the Indonesian firmware, so we either have to edit some framework or apk's which will take sometime
Click to expand...
Click to collapse
Arrh, regarding the caller id format, just changed the langauge to "English (UK)" get the job done o7.
xmlnoob said:
Arrh, regarding the caller id format, just changed the langauge to "English (UK)" get the job done o7.
Click to expand...
Click to collapse
yeah it worked, thanks
Have you ever used multimount sd app on rooited ace2?? this little app works fine on my old rooted HTC wildfire but not on ace2.
Wondering if any way to do dual mount on ace2, ie connect to computer as mass storage device while still the sdcard(s) are still mounted on the phone.
Thank you.
xmlnoob said:
Have you ever used multimount sd app on rooited ace2?? this little app works fine on my old rooted HTC wildfire but not on ace2.
Wondering if any way to do dual mount on ace2, ie connect to computer as mass storage device while still the sdcard(s) are still mounted on the phone.
Thank you.
Click to expand...
Click to collapse
haven't tried it yet, but I think it will not work, I guess...
Hey btw, can i use the zip created by this http://uot.dakra.lt/kitchen/ on your rom? i want the battery status in notification bar to show %.
Thank you.
xmlnoob said:
Hey btw, can i use the zip created by this http://uot.dakra.lt/kitchen/ on your rom? i want the battery status in notification bar to show %.
Thank you.
Click to expand...
Click to collapse
Just followed the instruction there and it generated a cwm compatible zip, installed and works nicely.
xmlnoob said:
Just followed the instruction there and it generated a cwm compatible zip, installed and works nicely.
Click to expand...
Click to collapse
I was just about to say yes, but then since you've done it, I'd say good for you!
I8160L can't
sathit2499 said:
I8160L can't
Click to expand...
Click to collapse
this ROM is for the GT-I8160 only.
App Downloading Problem
Hi
Great rom. Quite stable and scrolling works properly now as advertised (I actually thought the broken scrolling was an intentional design and not a bug, but its back to normal now thanks to the rom)
I do have 3 questions / problems though.
1. Not sure if anyone else has this problem, but after flashing, I am unable to install any apps from the google market when on wifi. I can browse the market and websites easily, but the downloading bar never initiates. Once I switch to 3g, the app starts downloading. Before I flashed this rom, wifi downloading of apps from google play worked on the same network.
2. When I enter recovery mode (volume up + home + power) my recovery mode is "Android Recovery 3e" not CWM recovery. As such, I only have the options to flash a .zip or wipe data / cache. Is this normal. I tried flashing Antsm's update_su and it remains android recovery.
3. This is minor. But when I try and use LMT launcher (http://forum.xda-developers.com/showthread.php?t=1330150) with the pie buttons, only the home button works. The other buttons do not. They worked fine before I flashed this mod. Not sure if anyone else has tried LMT with this rom?
4. Will kernels or roms based off of other firmwares work with our HK baseband and still have working scrolling on 3g/phone?
Thx alot for your support for the HK firmware
chzyken said:
Hi
Great rom. Quite stable and scrolling works properly now as advertised (I actually thought the broken scrolling was an intentional design and not a bug, but its back to normal now thanks to the rom)
I do have 3 questions / problems though.
1. Not sure if anyone else has this problem, but after flashing, I am unable to install any apps from the google market when on wifi. I can browse the market and websites easily, but the downloading bar never initiates. Once I switch to 3g, the app starts downloading. Before I flashed this rom, wifi downloading of apps from google play worked on the same network.
2. When I enter recovery mode (volume up + home + power) my recovery mode is "Android Recovery 3e" not CWM recovery. As such, I only have the options to flash a .zip or wipe data / cache. Is this normal. I tried flashing Antsm's update_su and it remains android recovery.
3. This is minor. But when I try and use LMT launcher (http://forum.xda-developers.com/showthread.php?t=1330150) with the pie buttons, only the home button works. The other buttons do not. They worked fine before I flashed this mod. Not sure if anyone else has tried LMT with this rom?
4. Will kernels or roms based off of other firmwares work with our HK baseband and still have working scrolling on 3g/phone?
Thx alot for your support for the HK firmware
Click to expand...
Click to collapse
ANSWERS:
To 1: I to, experiences that problem, still fixing it
To 2: You didn't flash the kernel properly, try flashing a custom kernel again.
To 3: Don't know what launcher is that.
To 4: Yes it will, we only need to copy a some specific files for 3G/GSM/Network to work.
kevincaja said:
ANSWERS:
To 1: I to, experiences that problem, still fixing it
To 2: You didn't flash the kernel properly, try flashing a custom kernel again.
To 3: Don't know what launcher is that.
To 4: Yes it will, we only need to copy a some specific files for 3G/GSM/Network to work.
Click to expand...
Click to collapse
In that case, I'll wait for that wifi fix. Will keep using the this rom in the meantime.
I'll wry about cwm next time I need to flash.
And the launcher problem started working but itself. Don't think it's a rom problem. Thx again!
Sent from my GT-I8160 using xda app-developers app

[Q&A][FAQ][SAC23] [N3][gOOh S6 EDGE Ported]FAQ, Q&A and User Guide for Sac23 ROM's

[Q&A][FAQ][SAC23] [N3][gOOh S6 EDGE Ported]FAQ, Q&A and User Guide for Sac23 ROM's
This is the first of many guides I will be posting and keeping up with.
It will be utilized for Q&A FAQ and HOW TO so we can keep the development thread for development purposes.
Post your questions and Myself or other knowledgeable users of Sac23 ROMS will answer as quickly as possible.
So ......
FAQ:
what do i do if its not booting on start up A- pull battery then restart.(IF YOU HAVE A REMOVABLE BATTERY)
after booting im getting a services have stopped wait or close A- pull the battery and restart.(IF YOU HAVE A REMOVABLE BATTERY)
the tweaks open then close help? A- need to deny super user for it then go in and change what u want then re enable superuser for it
how to install
install like u would any rom then wait for 2 min ( if wont boot )
pull battery and restart then you'll see optimizing apk's count down.(IF YOU HAVE A REMOVABLE BATTERY)
***Guys This Is A Port So remember it will have small glitches here and there but all in all should be stable ***​
For starters HOW TO INSTALL a ROM by SAC23
Installing with TWRP (View All Supported Devices>>> Find TWRP for your device):
Philz can be used and I will post instructions for it later https://www.mediafire.com/folder/qc3z1c59s8g03/PHILZ
This assumes that you ALREADY have TWRP Recovery installed on your phone and you know how to use it.
Download the ROM of choice...move it onto the EXT SD CARD.
VERY IMPORTANT>>> Move all music, pics, important data from internal storage to the ext SD card and/or to your pc, etc. because during this process, the internal will be completely erased.
Recommended Method to Flash SACS Custom ROMS using TWRP
Boot into TWRP
Select Wipe > Advanced Wipe
Select Dalvik, System, Data, Internal Storage, and Cache. Swipe to Wipe (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Select Format Data, Type YES, Press GO. (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Swipe to Factory Reset. (do this THREE TIMES)
Go back to MAIN menu and STOP HERE !!!!! READ NEXT STEP CAREFULLY....
[*]Select REBOOT INTO RECOVERY mode and Swipe to Install Super User. DO NOT REBOOT INTO SYSTEM!
[*]AFTER THE PHONE REBOOTS INTO RECOVERY:
NOW proceed with installing The ROM
Select Install Zip, Drill down to Sac23's Rom you want to flash, and Swipe to install.
Follow on screen instructions (if there are any).
When prompted, REBOOT SYSTEM.
THE FIRST BOOT WILL TAKE A MINIMUM OF 20 MINUTES..... SOME DEVICES EVEN LONGER...
.
.
HAVE PATIENCE
When the Home Screen appears and it is obvious that the install has completed, allow the phone to settle for another 10 minutes BEFORE you begin setting up your personal preferences and accounts.
If everything seems normal, set your phone up and profit.
IF IT WON'T BOOT....(IF YOU HAVE A REMOVABLE BATTERY)...try pulling battery and replacing battery then restart phone and you should see "Android Updating"
After setting up your personal info and you are now ready, the first thing you should always do after flashing any ROM is to go to settings, system updates, and refresh/update your PRL & PROFILE then reboot the phone. Second thing is go to settings, more networks, mobile networks, network mode, and select LTE/CDMA.
future use 1
Fixes and more
rlmiller said:
sms/mms alternative
for emoji's ..... Run this... http://is.gd/6aloxw
then this ..... http://is.gd/vpsjls
works great.... And has tons & tons of emoji's
Click to expand...
Click to collapse
gabesir said:
bluetooth fix .
https://www.androidfilehost.com/?fid=23991606952611256
Click to expand...
Click to collapse
future use 2
future use 2
future use 3
future use 3
Bluetooth fix .
https://www.androidfilehost.com/?fid=23991606952611256
Im having issues with grid size option. Does not allow me to set it. Any one have a solution?
faststang00 said:
Im having issues with grid size option. Does not allow me to set it. Any one have a solution?
Click to expand...
Click to collapse
@faststang00
I'll get with sac tonight and see "IF" there is a solution
Try to dirty flash the rom again and see if that fixes the grid
Was the thread removed???
Sent from my SM-N910F using XDA Free mobile app
Insult to injury on a great note 3 rom.
Thanks sac for the port and rlmiller for the support.
As requested, I have removed my mirror links
Sad day . . .
[Q&A][FAQ][SAC23] [N3][gOOh S6 EDGE Ported]FAQ, Q&A and User Guide for Sac23 ROM's
Lakerzz8_24 said:
Was the thread removed???
Click to expand...
Click to collapse
Guys . . . . I'm sorry have to be the bearer of bad news.... but the answer is "YES" ... It was a very short ride indeed.
For reasons I can not say, the g00h S6 Edge ported sac23 v1 ROM for N3 has been removed by the powers that be with-in XDA
Sac23 ROM's are not the issue here.... but this particular one had to be removed...permanently.
Please... do not post any.. and I MEAN ANY ! ! ! negative comments or questions about this and do not post any of your thoughts or theories about what the reason may be. None of that matters now.
We ALL need to pick up the pieces and move on like respectable members.
Thank you all for your understanding and your cooperation.
Robby
@mid3vil PLEASE edit your post and remove the link to the rom.... ASAP !
I do not want the mods to delete this thread also.
It will at least answer the obvious question everyone wants to know.
mid3vil said:
Not sure where the dev thread went.
If this is some violation of tos please feel free to remove this post, but given how good this rom is, i am obligated to share.
Sacs port LINK DELETED
Bluetooth fix
https://mega.co.nz/#!pAASzA5T!p604Uixq8knPW2qsyWwxQN0RW9kuoZHJPwL8hpBP140
Click to expand...
Click to collapse
Thread closed at user request.

DK S7 Edge/Note 5 INSTALL THREAD SMS/MMS working

READ CAREFULLY
Ok people are having issues with the original thread which can be found HERE the thread is just so cluttered, and instead of it being cleaned I'll just make a new one for people with the correct information so its not as cluttered. I have been running this rom now for little over 4 days no issues following the help of JRunRun and njdan30 ( So give them thanks )
I can confirm SMS/MMS/BT/GPS all work with no issues ( or with Fixes )
This is JRunRun's installation information that allows the ROM to work flawlessly and worked for me with minor tweaks ( I always try the path of least resistance first before taking the hard way )
TWRP 2.8.7.0 seems to work without issues.
EASY WAY ( TRY FIRST BEFORE YOU TRY THE MANUAL MANIPULATION OF FILES )
1. downloaded - ROM 3.3 DarkLord S7E APEK
2. downloaded - SLIM_APNs SLIM_APNs
3. downloaded - SU SuperSU 2.74
4. placed ROM and APN.zip and Supersu on my external sdcard
5. booted recovery (twrp 2.7.8.0), (I used 3.0.2 )
6. WIPE - Dalivk/Cache/System/Data (Then for good measure I factory reset)
7. Install -- loaded flashable zips from external sd to install
a. ROM 3.3 --> add more zips
b. Slim APN zip
c. Supersu --> started the flash
8. Flashed ROM --> chose sprint phone version, chose "SPR" as my csc in Aroma, DID NOT reboot on finish ( This is where people may be getting confused..)
Select SPRINT MODEL N9xxx then select SPR as the Sales Code ALSO there is another option that is showed here that DID give me issues there is 3 of them. 2 of them are WIPE options the 3rd is NO WIPE keep settings and app data I choose the 3rd option cause I noticed when I tried the first 2 my SMS would not work, and my WIFI would constantly diconnect
9. Allowed twrp to finish installing flashable apn and supersu zips
10. wiped cache/dalvik, reboot to system (10-20 min reboot).
8. Did not restore anything on system setup. Entered wi-fi info but turned it off afterwards. ( I just skipped this all together until the phone was completely ready to go )
Once loaded you will pick your language, and a option will show up wanting you to consent to sending usage data, uncheck mark that and continue setup
11. Loaded new kernel -- darkera 1.9 lte vzw (doubt this step is necessary but easy to find with a google search samsungvn) ( If you need the kernel link you can ask for it here and we will send it too you in a PM ) ( I am running the SPRINT kernel which seems to be very stable )
VIDEOS
Video 1
Video 2
Video 3
Video 4
MANUAL FIX FOR SMS/MMS
1. Backed up stock OF1 apns-conf.xml to computer
2. downloaded - ROM 3.3 DarkLord S7E APEK
downloaded - SLIM_APNs SLIM_APNs
downloaded - SU SuperSU 2.74
3. Replaced apns-conf.xml file in SLIM_APNs.zip with the stock apns-conf.xml file saved in step 1, rezipped and saved with new zip name "stock_APNs_modded.zip" Some people are just flashing the slim apn without adjusting it and having succes.
4. placed ROM and APN.zip and Supersu on my external sdcard
5. booted recovery (twrp 2.7.8.0)
6. WIPE - Dalivk/Cache/System/Data [/COLOR] (Then for good measure I factory reset)
7. Install -- loaded flashable zips from external sd to install
a. ROM 3.3 --> add more zips
b. modded Slim APN zip
c. Supersu --> started the flash
5. Flashed ROM --> chose sprint phone version, chose "SPR" as my csc in Aroma DID NOT reboot on finish ( This is where people may be getting confused..)
Select SPRINT MODEL N9xxx then select SPR as the Sales Code ALSO there is another option that is showed here that DID give me issues there is 3 of them. 2 of them are WIPE options the 3rd is NO WIPE keep settings and app data I choose the 3rd option cause I noticed when I tried the first 2 my SMS would not work, and my WIFI would constantly diconnect
6. Allowed twrp to finish installing flashable apn and supersu zips
7. wiped cache/dalvik, reboot to system (10-20 min reboot).
8. Did not restore anything on system setup. Entered wi-fi info but turned it off afterwards. ( I just skipped this all together until the phone was completely ready to go )
Once loaded you will pick your language, and a option will show up wanting you to consent to sending usage data, uncheck mark that and continue setup
9. change /efs/imei/mps_code to "vzw" via ES File app <-- vzw must be lower case
10. build prop changes:
Code:
ro.product.name “cm_hltevzw”
ro.product.device “hltevzw”
telephony.lteOnCdmaDevice="1"
ro.telephony.default_network="8"
Added the following lines after the ro.telephony.default_network line:
Code:
ro.cdma.home.operator.numeric=311480
ro.cdma.home.operator.alpha="Verizon Wireless”
ro.cdma.homesystem=64, 65, 76, 77, 78, 79, 80, 81, 82, 83
gsm.sim.operator.numeric=311480
gsm.operator.numeric=311480
gsm.sim.operator.alpha=Verizon
gsm.operator.alpha=Verizon
ro.net.apnwhitelist=fota,ims,supl,verizon,cbs,mms
ro.net.apnroamingwhitelist=ims
ro.net.apnpolicywhitelist=fota,ims,verizon,verizon 800
ro.net.apnroamingblacklist=fota,verizon800
11. used Galaxy Tools to make sure mps_code and sales_code is set to "vzw"
12. Loaded new kernel -- darkera 1.9 lte vzw (doubt this step is necessary but easy to find with a google search samsungvn) ( If you need the kernel link you can ask for it here and we will send it too you in a PM ) ( I am running the SPRINT kernel which seems to be very stable )
Again thanks to JRunRun and njdan30 for all the helpful information and always trying to give helping hand to those that need it! and those that want to learn!! :highfive::highfive:
Your links don't work.
[email protected] said:
Your links don't work.
Click to expand...
Click to collapse
It looks like it was either deleted or possibly moved I will try and upload the files
Is it a necessity to be on OF1? Im still on NC4. Just curious.
wdcspurs said:
Is it a necessity to be on OF1? Im still on NC4. Just curious.
Click to expand...
Click to collapse
Honestly I do not have a answer to that, since I was already OF1 when I unlocked the bootloader. You can always try and let people know here, I was not the creator of this ROM I was just making a new thread for people who were having issues, due to the original thread being so cluttered with 5 billion different, ways to make it work..
As far as the files go I am currently uploading to google drive to share. I should have everything ready in a few more hours, and will post links
Links fixed at the moment, looking for other hosts for mirrors
wdcspurs said:
Is it a necessity to be on OF1? Im still on NC4. Just curious.
Click to expand...
Click to collapse
In loading this rom everything will change but the modem. I'm still using OF1 modem for example and have a totally functioning rom. That being said, yes I would upgrade and flash a new OF1 rom clean before doing the install. This rom takes quite a bit too get working but when you get use to it, it's no big deal. I wish folks good luck on following the instructions. They did not include any apn settings which I needed to get it going but what do I know.
Hello I am a bit confused with the rom 3.3 ---> add more zips did you mean you installed the rom then installed slim zip then you reinstalled the rom again?
Sent from my SM-N900V using XDA-Developers mobile app
---------- Post added at 03:12 PM ---------- Previous post was at 03:09 PM ----------
And did you modify slim apn with your apns.conf.xml?
Sent from my SM-N900V using XDA-Developers mobile app
armus said:
In loading this rom everything will change but the modem. I'm still using OF1 modem for example and have a totally functioning rom. That being said, yes I would upgrade and flash a new OF1 rom clean before doing the install. This rom takes quite a bit too get working but when you get use to it, it's no big deal. I wish folks good luck on following the instructions. They did not include any apn settings which I needed to get it going but what do I know.
Click to expand...
Click to collapse
Which is why you download the SLIMS_APN
seanbwoi said:
Hello I am a bit confused with the rom 3.3 ---> add more zips did you mean you installed the rom then installed slim zip then you reinstalled the rom again?
Sent from my SM-N900V using XDA-Developers mobile app
---------- Post added at 03:12 PM ---------- Previous post was at 03:09 PM ----------
And did you modify slim apn with your apns.conf.xml?
Sent from my SM-N900V using XDA-Developers mobile app
Click to expand...
Click to collapse
Add Zips means in TWRP you select the ROM, then select ADD more ZIPS which in turn you add 3.3 SLIM_APN, and SU then flash..
and no I didn't modify anything, my install method is highlighted in RED.
Thanks will definitely try it later
Sent from my SM-N900V using XDA-Developers mobile app
I can't seem to save my apn due to the fact that at apn option it says user restricted any idea how to fix this? can't get data with this
Sent from my SM-G935F using XDA-Developers mobile app
---------- Post added at 03:15 AM ---------- Previous post was at 02:26 AM ----------
I also can't get the signal to stop cutting off
Sent from my SM-G935F using XDA-Developers mobile app
seanbwoi said:
I can't seem to save my apn due to the fact that at apn option it says user restricted any idea how to fix this? can't get data with this
Sent from my SM-G935F using XDA-Developers mobile app
---------- Post added at 03:15 AM ---------- Previous post was at 02:26 AM ----------
I also can't get the signal to stop cutting off
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Then you probably didn't uncheck mark the, "send data" option while setting up your phone... and if you used my way in red ( I didn't have to use the FULL how to ) then you shouldn't have to edit the APN at all, you just flash the rom APN and SU that's all you have to do.
ONLY use the full installation if the easy way doesn't work...
The pics I just uploaded will kinda help, in TWRP. make sure you ADD all 3 files ROM - SLIM APN - SU then you start the flash
2nd pic is install of rom, you choose what is circled, I didn't get one of the next screen but you scroll down till you find the code "SPR"
Next pic again the option needed here is whats circled.
4th pic, MAKE sure you leave this ALONE don't select it, just finish out of it, and it will take you back to TWRP and the flash/install of SLIMS APN and SU will begin once those are done reboot
Can't mount extsd.
Nvm. I figured it out.
You have to flash the Kernel for the SD to work
Sent from my SM-G935F using XDA-Developers mobile app
ExiaGN said:
You have to flash the Kernel for the SD to work
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Can someone send me the kernel by PM? Thanks
i was able to get the rom up and running but noticed i am unable to access the internal sd or external sd through my phone. I am also unable to boot to twrp.
which means I cannot flash the kernel that allows access to the sd card.
I tried reinstalling twrp through odin, it was supposedly successful but just get pushed back into system when booting to recovery.
any help would be appreciated
thanks,
Edit: was able to access twrp through restart option instead of shutting off and using hardware button combo
MMS
I just got this installed and all seems working fine. Except MMS. Im sure Im just missing something. When I send an mms messgae, it fails and says invalid address entered. What gives?
could someone send me the link to the darkera 1.9 lte vzw kernel please
I made the mistake of changing the Access Point Names without copying them first. Would someone be as so kind to list the correct settings, that has everything working. Thanks
jbxr1992 said:
i was able to get the rom up and running but noticed i am unable to access the internal sd or external sd through my phone. I am also unable to boot to twrp.
which means I cannot flash the kernel that allows access to the sd card.
I tried reinstalling twrp through odin, it was supposedly successful but just get pushed back into system when booting to recovery.
any help would be appreciated
thanks,
Edit: was able to access twrp through restart option instead of shutting off and using hardware button combo
Click to expand...
Click to collapse
Shouldn't be having any issues with getting back into TWRP, using the buttons.. Did you use the full install or my work around?
wdcspurs said:
I just got this installed and all seems working fine. Except MMS. Im sure Im just missing something. When I send an mms messgae, it fails and says invalid address entered. What gives?
Click to expand...
Click to collapse
Did you use the full flash guide? or my work around ? ( work around was in red )
JEFFSGTP said:
could someone send me the link to the darkera 1.9 lte vzw kernel please
Click to expand...
Click to collapse
Sent
TheHanz said:
I made the mistake of changing the Access Point Names without copying them first. Would someone be as so kind to list the correct settings, that has everything working. Thanks
Click to expand...
Click to collapse
Did you try using the quick way or did you use the full step by step ?

Categories

Resources