Problem On My TF201 - No Option To Boot Into Fastboot - Going Straight Into Recovery - Asus Eee Pad Transformer Prime

Hello
After long time of reset and installations (4 hours from now) i'm stuck now on a very strange problem.
My Asus Prime tf201 is going straight into TWRP Recovery.
Even when i press the volume down and the power button i can't get into Fastboot screen.
I must get into the Fastboot screen to reset and delete my prime completely.
Even when i insert a small pin into the reset hole and pressed the volume down is doing every time the same thing and takes mw to the Recovery.
My device is also Unlocked.
Is there a way to fix it and be able to have the fast boot screen ?
Or my tablet is dead and i get put it in the garbage

james341 said:
Hello
After long time of reset and installations (4 hours from now) i'm stuck now on a very strange problem.
My Asus Prime tf201 is going straight into TWRP Recovery.
Even when i press the volume down and the power button i can't get into Fastboot screen.
I must get into the Fastboot screen to reset and delete my prime completely.
Even when i insert a small pin into the reset hole and pressed the volume down is doing every time the same thing and takes mw to the Recovery.
My device is also Unlocked.
Is there a way to fix it and be able to have the fast boot screen ?
Or my tablet is dead and i get put it in the garbage
Click to expand...
Click to collapse
So, is recovery working or only the splash screen?
If working, can you mount ext_sdcard?
If working' can you adb into tab?

Yes, the recovery is working and I can adb but can't mount ext_sdcard
Sent from my iPhone using Tapatalk

james341 said:
Yes, the recovery is working and I can adb but can't mount ext_sdcard
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
So you can install recovery again.
I recommend one of those from the post#01 from this page: http://forum.xda-developers.com/showthread.php?t=2772093
Push recovery.blob to internal sdcard (/storage/sdcard0) and try to flash using terminal command of TWRP.
Code:
dd if=/storage/sdcard0/recovery.blob of=/dev/block/mmcblk0p4 [enter]
reboot
If it works, you will see a blue progress bar. Let it finish and boot itself to System. On ASUS screen press power and voldown and you should see the three bootloader icons, RCK flashing. Now you are in fastboot mode. If you see four icons (RCK, Andy, USB and wipe) then you have wrong bootloader.
Report again here.

Thanks
In all the downloads in the link you gave me the file that i have after the unzip process is the recovery.img and it's not a blob file.
where can i find a blob file ?
So I searched in google for recovery blob files for the tf201 and it took me to the TeamWin website :
http://teamw.in/project/twrp2/93
and i went down in the page for the "Download - Recovery Image / Fastboot Method (using ICS or JB Asus boot loader):" section and downloaded both ICS and JB blob files and tried to push first the JB and run the commend in the terminal . in both files it looks like it was working and than i reboot (it asks me to install SuperSU and i press No) but even after the restart nothing happened and it takes me to the Teamwin recovery (that in some strange way, the first screen that it shows me is to enter some password ....and i press cancel)
thanks

james341 said:
Thanks
In all the downloads in the link you gave me the file that i have after the unzip process is the recovery.img and it's not a blob file.
where can i find a blob file ?
So I searched in google for recovery blob files for the tf201 and it took me to the TeamWin website :
http://teamw.in/project/twrp2/93
and i went down in the page for the "Download - Recovery Image / Fastboot Method (using ICS or JB Asus boot loader):" section and downloaded both ICS and JB blob files and tried to push first the JB and run the commend in the terminal . in both files it looks like it was working and than i reboot (it asks me to install SuperSU and i press No) but even after the restart nothing happened and it takes me to the Teamwin recovery (that in some strange way, the first screen that it shows me is to enter some password ....and i press cancel)
thanks
Click to expand...
Click to collapse
The cited teamw.in page is outdated. There TWRP stops at 3.6.0.1 which is (to my experience) an evil one. We are at TWRP 2.8.4.0.
Why don't you take my advice and take that one of here: http://forum.xda-developers.com/showpost.php?p=53139910&postcount=1 ???? Nowadays there is no ICS TWRP anymore.
Best IMO is this one: https://www.androidfilehost.com/?fid=23622183712468163
Don't stall at the name TF300T; it's also for TF201 and works with ext4 and f2fs. Either you install it by zip flash or unzip it and get the recovery.img to flash manually.
If you care for a blob file, rename it to recovery.blob. Android terminal commands don't care for file extensions; you need only a .img extension for the zipflash routine of TWRP.

Thanks
will give it a try now

james341 said:
Thanks
will give it a try now
Click to expand...
Click to collapse
If you are more comfortable with fastboot, you can flash recovery using
Code:
fastboot -i 0x0b05 flash staging recovery.img
BTW could you post version of your bootloader (small notice on left upper margin of ASUS screen at bootload).

i tried and it give me an error
I'm uploading now a youtube video for you to see what i am doing - it will take a while and i will be happy if you can pass here tomorrow to see it and what it gives me.
about the bootloader - i think this is the problem, i don't have nothing there , when i turn on the tablet i see only the Asus logo and a message up there that said "device is unlocked"
about the fastboot - i can't run fastboot command because my tablet can't get into fastboot mode - as i told you it boot straight into the recovery

james341 said:
i tried and it give me an error
I'm uploading now a youtube video for you to see what i am doing - it will take a while and i will be happy if you can pass here tomorrow to see it and what it gives me.
about the bootloader - i think this is the problem, i don't have nothing there , when i turn on the tablet i see only the Asus logo and a message up there that said "device is unlocked"
about the fastboot - i can't run fastboot command because my tablet can't get into fastboot mode - as i told you it boot straight into the recovery
Click to expand...
Click to collapse
O.k. one of our best devs here has for the 'boot only to recovery' issue an elaborate solution.
http://forum.xda-developers.com/showpost.php?p=54965562&postcount=1
Problems could be connected with wrong bootloader. @lj50036 has somewhere provided some zips with fitting bl/recovery combos (don't find it atm).

Thanks
I will give it a try - hope to have short night.....

das chaos said:
O.k. one of our best devs here has for the 'boot only to recovery' issue an elaborate solution.
http://forum.xda-developers.com/showpost.php?p=54965562&postcount=1
Problems could be connected with wrong bootloader. @lj50036 has somewhere provided some zips with fitting bl/recovery combos (don't find it atm).
Click to expand...
Click to collapse
IS it really that elaborate ?

Ok ...there's some change , now I can see the fastboot screen on my prime. A screen I haven't see for a while ...but now I can't run fastboot commends aldo ADB run fine . It looks like when i put Fasboot devices - it don't see the device.
Sent from my iPhone using Tapatalk

james341 said:
Ok ...there's some change , now I can see the fastboot screen on my prime. A screen I haven't see for a while ...but now I can't run fastboot commends aldo ADB run fine . It looks like when i put Fasboot devices - it don't see the device.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Look in device manager, can you see the device in there ?
Thx Josh

Yes - it say fastboot asus
Sent from my iPhone using Tapatalk

james341 said:
Yes - it say fastboot asus
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Hmmmm, not sure .. odd ...
I can help on hangouts if you would like more help looking into this ....
Drop me a line sometime [email protected]
Thx Josh

Ok no problem - I will contact you later ...need to go to work...many many thanks .....
Sent from my iPhone using Tapatalk

I can't found you in Hangouts - is this the right email?
Sent from my iPhone using Tapatalk

james341 said:
I can't found you in Hangouts - is this the right email?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
'gamil.com' is of course 'gmail.com'.
---------- Post added at 08:27 ---------- Previous post was at 08:22 ----------
james341 said:
Ok ...there's some change , now I can see the fastboot screen on my prime. A screen I haven't see for a while ...but now I can't run fastboot commends aldo ADB run fine . It looks like when i put Fasboot devices - it don't see the device.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
So:
1. How many icons on 'fastboot screen' which is bootloader screen.
2. Now you would see bootloader version; report.
3. 'device' command doesn't work on my pc either; fastboots nevertheless. Try
Code:
fastboot -i 0x0b05 flash recovery recovery.img
and report outcome by the word.

I see 3 icons . I can't remember if I see now the bootloader version ...I'm in my office now. By the way, I sent you a message in hangouts.
Sent from my iPhone using Tapatalk

Related

Hangs on boot to recovery mode and normal mode [Solved! :)]

Hello people
I think my HTC Hero is what you call softbricked.
When I hold Home + Power on to go to recovery mode I get this single line of text:
Build : RA-hero-v1.5.2
If I hold Home and press power on the text disappears leaving an all black screen. Pressing home + power on again brings the text back.
When I boot normally it just keeps saying "Hero"
I think I did a full wipe, installed VillainROM 6.0.0 and then did a OTA update to VillainROM 6.1.0. I did notice the latest rom being rather slow and hanging sometimes. Then three days ago it froze. I pulled the battery and when I put it back in I was left with what I've described above.
Can't access VillainROM's official website
Another frustrating thing is that w w w. villainrom .co .uk has seemed down to me this whole softbrick-period. But they've announced a new version and no one have commented on their site being down. Apparently I'm the only one who can't access it.
Vol. down + power on
I've never used this boot mode. But it's the only one which seems to work.
HBOOT says Sd checking and all the tests results in:
No image! or No image or wrong image!
FASTBOOT just gives a red box with the white text FASTBOOT in it.
What can i do?
I did a nandroid backup before installing VillainROM 6.0.0 but I can't access recovery mode.
I would like to install the official 1.5 RUU-rom but HTC Sync can't find my phone, neither can adb shell.
I can insert the SD card in my computer and put an update.zip file in the root. Is this a solution? I don't know how to make the phone boot the update.zip file or how this works.
Sorry for this long post. I've been searching the web ever since thursday without any luck. So now I'm just putting all I've experienced out.
I hope someone can help me. I would be very glad
Alright, if you can get to the fastboot screen, this is what you should do:
Plug your hero in fastboot mode into a computer with the latest android sdk installed.
DL the latest recovery for your device: I don't think I can post links yet so search the forum for Amon RA's recovery (1.6.2) and place it in the tools folder of the sdk.
Then:
Open a command prompt (or terminal for linux, idk for mac)
Go to the tools folder with cd
(./)fastboot boot recovery-RA-hero-v1.6.2.img
(./ is for linux ^^,) And that should normally work
From there your best bet is to use Nandroid to recover one of your backups.
Thank you for your response
But I got an error:
Code:
C:\android-sdk-windows\tools\fastboot boot recovery-RA-hero-v1.6.2.img
downloading 'boot.img' ... FAILED (remote: not allow)
finished. total time: 0.010s
The site I downloaded the recovery image from suggestion this installation:
via fastboot + adb -> In case you don't have a custom recovery, so when you get signature fail errors
Code:
adb shell reboot bootloader fastboot boot recovery-RA-hero-v1.6.2.img adb shell mount /sdcard adb push recovery-RA-hero-v1.6.2.img /sdcard/recovery-RA-hero-v1.6.2.img adb shell flash_image recovery /sdcard/recovery-RA-hero-v1.6.2.img adb shell reboot
I've also tried this but it resulted in: error: device not found
I've noticed how my phone says "fastboot usb" when connected to my computer.
Re: Hangs on boot to recovery mode and normal mode
NessGuard said:
Thank you for your response
But I got an error:
Code:
C:\android-sdk-windows\tools\fastboot boot recovery-RA-hero-v1.6.2.img
downloading 'boot.img' ... FAILED (remote: not allow)
finished. total time: 0.010s
The site I downloaded the recovery image from suggestion this installation:
via fastboot + adb -> In case you don't have a custom recovery, so when you get signature fail errors
Code:
adb shell reboot bootloader fastboot boot recovery-RA-hero-v1.6.2.img adb shell mount /sdcard adb push recovery-RA-hero-v1.6.2.img /sdcard/recovery-RA-hero-v1.6.2.img adb shell flash_image recovery /sdcard/recovery-RA-hero-v1.6.2.img adb shell reboot
I've also tried this but it resulted in: error: device not found
I've noticed how my phone says "fastboot usb" when connected to my computer.
Click to expand...
Click to collapse
Have you flashed the official 2.1 rom thats been floating round?
Sent from my HTC Hero using Tapatalk
AndroHero said:
Have you flashed the official 2.1 rom thats been floating round?
Click to expand...
Click to collapse
No, I haven't.
Just now I did this:
Code:
C:\android-sdk-windows\tools\adb devices
List of devices attached
And none was shown...
Then I did:
Code:
C:\android-sdk-windows\tools\fastboot devices
HT97TL903447 fastboot
Is this some sort of serial number of my phone?
Re: Hangs on boot to recovery mode and normal mode
Your sd card is seen by your phone or not ?
sebxd said:
Your sd card is seen by your phone or not ?
Click to expand...
Click to collapse
How can I check this?
Hboot says Sd checking and all the tests results in:
Code:
No image! [I]or[/I] No image or wrong image!
The site isn't down, but some people can't get to it due to their DNS setup.
Use 8.8.8.8 and 8.8.4.4 to get it, or go to http://villainrom.grense.no/villainrom.co.uk to get in.
Re: Hangs on boot to recovery mode and normal mode
Mmm if i'm right you can't boot normaly ? It's strange..
Have you tried to boot without your sd card ?
I don't really know what the answer of fastboot means..
anon2122 said:
The site isn't down, but some people can't get to it due to their DNS setup.
Use 8.8.8.8 and 8.8.4.4 to get it, or go to
[url not allowed] to get in.
Click to expand...
Click to collapse
Thanks, but I think I will just stick to this forum. Hope I can get a solution
sebxd said:
Mmm if i'm right you can't boot normaly ? It's strange..
Have you tried to boot without your sd card ?
I don't really know what the answer of fastboot means..
Click to expand...
Click to collapse
Yes, I have tried booting without SD card and without simcard aswell. My simcard is now in a good old Nokia 3310
I have updated the radio earlier
A while ago I updated the radio to this version: 63.18.55.06JU_6.35.09.26
Is that an android 2.1-radio? And is that what's causing "not allow" when running fastboot flash?
What recovery image would I then be allowed to flash? An official one?
Or is it my bootloader (that's SPL, right?) that needs to be flashed to a version that allows the fastboot flashing?
I haven't been able to find a guide on flashing SPL on HTC Hero.
Is this the way to go?
Still need help or is this now sorted?....
It's now working
My phone is now working. I did the following:
1. Connected my phone to a computer with HTC Sync and drivers installed.
2. Started the bootloader on my phone (vol. down + power on, hold until bootloader starts).
3. Pressed back to start fastboot. It said fastboot usb because it was connected to my computer.
4. I tried to install an official 1.5 RUU rom. The phone responded and began the process. It cleared/deleted some caches/files or something. But then my computer and my phone said that the ROM installation had failed and that I should find the right rom.
5. Somehow this cleaned up the phone so I now could boot in recovery mode as I used to (I didn't try a normal boot, so can't say if that worked). I did a full wipe and flashed a custom rom (not VillainROM 6.0.0 ).
Even though VillainROM has made me sad I will now go for VillainROM 10.
Wish me luck
And thanks for your responses.
Brilliant. Just edit the title of your thread to put [SOLVED] on.
And good luck, but i'm sure you wont need it.
EDIT...... Excellent, done it already.
ddotpatel said:
EDIT...... Excellent, done it already.
Click to expand...
Click to collapse
Hehe, yes, even though it's my first post I am a little bit smart
Oh nice ! You have done it ! It is really smart indeed and I'm happy for you !
its not solved for my hero
i tried everything within last two days. but i havent succeess. (i tried your solition too)
i did nondroid backup and then restore. finaly my phone doesnt open.
and after i have given the same your errors (from adb and phone)...
but i havent success..
where i do wrong?
thanks...
Can you explain what you did, what are the errors and when does it appears please
EDIT...... Excellent, done it already.
Click to expand...
Click to collapse
Hehe, yes, even though it's my first post I am a little bit smart
Click to expand...
Click to collapse
Indeed. I'm sorry, I never meant to sound like an ass.
-------------------------------------
Sent via the XDA Tapatalk App

Cant save my Prime

Flashed the Broccoli nightly rom I can no longer boot or get back into CWM. Computer cannot start the device. Can someone please help me? Tried all the tools and methods. It won't work unless I can get the device to start when connected to my computer.
RIght now when I press Vol Up and power, it brings me to cold boot linux. Cannot select anything or do anything. When connected to comp, it says device cannot start Code 10. Don't know what else to do. Help please
Looks like you're having an issue similar to mine. You'll need to setup ADB and push another rom to your Prime.
Can you get into recovery?
Sent from my WabiSabiGeek'd out Transformer Prime using the Interweb
This thing is completely frozen no matter what. I can power off and on but that's about it. The device won't start according to windows. I'm praying I won't have to RMA or something.
You shouldn't be getting that screen pressing vol up and power.....that should be vol down and power, then doing nothing.
Sent from my WabiSabiGeek'd out Transformer Prime using the Interweb
Thats pretty strange. You kinda screwed unless you can get into recovery or fastboot
Sent from my WabiSabiGeek'd out Transformer Prime using the Interweb
Hi,
where it says press down to change mode you should be able to highlight the middle icon. If so that is fastboot and you have a chance.
I had a very bricked Prime and it only got that far. Then I followed this post.
You must download the fastboot and adb from the links given. I had some from elsewhere and they didn't work so well.
Also, I am not an Android hacker and I think that the dd command is somehow dangerous. At the end of the day, on my machine, I'm back with AndroWook and latest Motley kernel
Best of luck.
Tritium
Thanks let me try now. I hope it works. How did you get the computer to recognize the prime? Do I need to enable asus sync?
Tritium3.016 said:
Hi,
where it says press down to change mode you should be able to highlight the middle icon. If so that is fastboot and you have a chance.
I had a very bricked Prime and it only got that far. Then I followed this post.
You must download the fastboot and adb from the links given. I had some from elsewhere and they didn't work so well.
Also, I am not an Android hacker and I think that the dd command is somehow dangerous. At the end of the day, on my machine, I'm back with AndroWook and latest Motley kernel
Best of luck.
Tritium
Click to expand...
Click to collapse
It's alive!!! Thanks for the help. :good:
wao i have the same problem but i only go on CWM and not fastboot and still cant get it on fastboot and its not reconized the drivers any ideas??
klutch said:
wao i have the same problem but i only go on CWM and not fastboot and still cant get it on fastboot and its not reconized the drivers any ideas??
Click to expand...
Click to collapse
So when your device turns on its in a recovery loop right? You try to reboot and it goes right back to recovery?
It's ok don't worry, we will get it fixed. If that's what your problem is its referred to brick 1a in the unbrick your prime sticky thread.
We just need to setup ADB if you haven't already, and run one command. PM me if you need some help and ill try my best to get you through it or remotely connect to your computer to help you.
I highly suggest TWRP recovery after you get rebooted.
Sent from my ADR6425LVW using xda premium
klutch said:
wao i have the same problem but i only go on CWM and not fastboot and still cant get it on fastboot and its not reconized the drivers any ideas??
Click to expand...
Click to collapse
This is what I did while in CWM. Below is a copy of an insert from this thread.
http://forum.xda-developers.com/showthread.php?p=24923189#post24923189
Anyhow, so after you have that version installed:
1. Download "ROOTED 9.4.2.21 CWM compatible signed US version"
d - h . s t / r 4 4 -> WITH NO SPACE! (This is from the Primeval: The STOCK stock rom) Thread.
2. EXTRACT IT to the same directory where your ADB is! We only need the BLOBFILE from that zip folder!
3. Once you have the files extracted just run the following on your Command line:
adb push blobfile /sdcard/ ---> Its going to look like its not doing
nothing but dont worry its doing it in the background after 401 or some
seconds the command line will returned to you with a message like this:
1275kb, dadadada...
4. VERY IMPORTANT!: enter:
adb shell
dd if=/sdcard/blobfile of=/dev/block/mmcblk0p4
(Same as the previews step it will take forever but it will work dude!)
5. DONE! at least this is what worked for me man!
Im so happy now my Asus is freaking Brand NEw again! i was JUST about to through this garbage away but im so happy "dklue" gave me the BLOB concept idea! heheheh i guess i learned something new now..
the thing is the computer is not picking it up i tried diffrent drivers and still nothing i try doing ADB Shell device not found in order to do some commands i have to have it mount and thats the problem what ever i do wont move nothing so basicly is still on CWM only reboot and back again to CWM
Hold power and vol down to boot into CWM. Then you can do the blobfile push. It worked for me

[Q] TF201 definitly dead ? (hard-bricked) [Solve]

Hello guys, I'm here because my TF201 seems to be bricked ...
I know, there is a lot of threads about this kind of problems, but I can't succeed to solve mine by reading hundred of threads.
I explain what's happened :
My TF201 has an unlocked bootloader (by asus method), root, and has a CWM (CWM-based Recovery v5.5.0.4). I was on the lattest ICS build (9.4.2.15). Since october, i know that JB was on TF201, but not mine. So I decide to download the lattest Stock JB version from Asus website and to place it into my SDcard. I reboot my TF201 in recovery (holding down the volume button, then up), I've done a backup. After this backup, I've done a factory reset and I install the new ROM from my SDcard. Maybe I should not do this ... But now, my tablet stay on the bootscreen (Asus EEE pad logo). I can always access to the recovery, so I tried to factory reset and restore my previous backup ... But it didn't work, my tablet still bricked.
So, I went to google, i've read lots of threads for trying to understand whats happened to my TF201. I've read some thread on XDA forum too.
I've tried every solutions proposed, and anyone work.
I've read some articles about ADB. I installed it, but the problems is that my TF201 can't be detected by my computer (Running Win8 64). I installed drivers from here : http://forum.xda-developers.com/showthread.php?t=1379875
But, still nothing, impossible to show my device when I write "adb devices" or "fastboot devices" in windows cmd.
I'm a little bit desesperate, so i came here for writting this thread, hopping that someone could help me to unbrick my TF201 without send it back to Asus (wich cost me hundreds of euros).
I'm going in front of some questions that i've read in other thread :
No i've not TWRP recovery installed.
I haven't got a nvFlash.
Thanks for reading this thread and for your help !
Sincerelly,
Thrakka.
PS : I'm really sorry for my bad english, don't blame me ^^
You can access recovery?
Then you are not bricked.
Why not flash a custom rom?
Garret said:
You can access recovery?
Then you are not bricked.
Why not flash a custom rom?
Click to expand...
Click to collapse
Primarily because he has cwm recovery and jellybean bootloader. He does not know how to set up his drivers on his computer for fastboot to install the correct recovery for his bootloader.
to the OP, go here http://forum.xda-developers.com/showthread.php?t=1615990 and figure out how to get twrp for jellybean on your prime. TWRP supports flashing roms from the microsd slot so you dont need to push one to your sd. also if you need help getting the naked drivers to work on your prime go the link http://forum.xda-developers.com/showthread.php?t=1426502 that pertains to others putting it on the prime. they will be more help than the galaxy naked drivers users. FORGET ABOUT CWM!!! IT IS NOT SUPPORTED ON PRIME FOR JELLYBEAN
@ Garret
Yes I can access to recovery, but for flashing a new rom, I need to access my internal SDcard ... But infortunatelly, now I can't.
A thing that I don't understand is when I restore my ICS backup, it doesn't work ...
@ Whycali
I'm gonna try your advice this afternoon.
But how can I install TWRP on my prime without access ... I'm will try with your links ... Hoping succeed ...
I'll give you the results in the evening.
Sincerely,
Thrakka.
I can access to the fastboot mode, but impossible to flash anything ...
I've taken all driver for the prime on my computer, install them.
the command "fastboot devices" work, i can see my prime : 00000 fastboot
but when I try the command "fastboot -i 0x0b05 flash recovery twrp.blob" from www{dot}teamw.in/project/twrp2/93, the result : error: cannot load 'twrp.blob' : No error.
I can't understand.
The directory "/platform-tools" from the ADT is in the PATH variable, and the file "twrp.blob" is in the same directory. Two ways for the fastboot command to find it, but it can't succeed ...
Same problem when I want to create my own nvflash blob file (tuto from androidroot.mobi/t3_nvflash/) with the command "fastboot -i 0x0b05 flash staging ebtblob.bin", the result is the same : error: cannot load 'ebtblob.bin' : No error.
I can't see my mistake ... Could you help me ?
Sincerely,
Thrakka.
PS : as i'm a new member, I can't post direct link to other site where I found tutos, sorry ...
Thrakka said:
I can access to the fastboot mode, but impossible to flash anything ...
I've taken all driver for the prime on my computer, install them.
the command "fastboot devices" work, i can see my prime : 00000 fastboot
but when I try the command "fastboot -i 0x0b05 flash recovery twrp.blob" from www{dot}teamw.in/project/twrp2/93, the result : error: cannot load 'twrp.blob' : No error.
I can't understand.
The directory "/platform-tools" from the ADT is in the PATH variable, and the file "twrp.blob" is in the same directory. Two ways for the fastboot command to find it, but it can't succeed ...
Same problem when I want to create my own nvflash blob file (tuto from androidroot.mobi/t3_nvflash/) with the command "fastboot -i 0x0b05 flash staging ebtblob.bin", the result is the same : error: cannot load 'ebtblob.bin' : No error.
I can't see my mistake ... Could you help me ?
Sincerely,
Thrakka.
PS : as i'm a new member, I can't post direct link to other site where I found tutos, sorry ...
Click to expand...
Click to collapse
on your pc you need to run the command from the same directory that contains the file you wish to transfer. easiest way to do this is to place the blob in the folder where your fastboot application is then hold shift and right click inside the folder. from the menu that opens choose open command window here. from there run your fastboot commands.
---------- Post added at 12:37 PM ---------- Previous post was at 12:02 PM ----------
hey, hold up and check your pm. Do not install TWRP for jb if you are still on the ICS bootloader.
you can check which bootloader version of twrp to install by where the nvidia logo is on the bootscreen. bottom center needs ics twrp. bottom right needs Jellybean twrp. By all means if you are still with ics finish the nvflash backups first.
867-810 Eecuri
Little update for the post :
I succeed all this steps, I've TWRP for ics now.
I'm looking for an ICS Rom for install it.
What could I do if I want to have a JB ROM ?
Thrakka said:
Little update for the post :
I succeed all this steps, I've TWRP for ics now.
I'm looking for an ICS Rom for install it.
What could I do if I want to have a JB ROM ?
Click to expand...
Click to collapse
Follow the instructions fully in the second post of the androwook thread for upgrading from ics.
All problem are solved !
Thanks Whycali for your precious help !
I've installed the AndroWook ROM, and it's a real pleasure !
Good Job man, I was travelling, just saw you made it
Thank you Garret ;D
It was not as bad as i was thinking before posting this thread !
Just compatilibity problem between a JB rom with ICS bootloader and ICS recovery ^^
senior member, can you help me with this problem ?
http://forum.xda-developers.com/showthread.php?t=2263137
Help with tf201
Hey all,
To start I have a bricked tf201. i was following a Youtube tutorial to update my twrp. i followed the instruction diligently. I was running CM 10.1 on the tf201. After the Install I rebooted and now it boot loops. if i hold vol down + pwr button it looks for revovery kernel and then fails. if i hold Vol up + pwr button it vibrates and black screen assuming this is apx mode. i followed ever tutorial on apx and i can't get anything to work. is there any hope for this tablet? Thanks in advance!
bricked tf201 too
bucknerspc said:
Hey all,
To start I have a bricked tf201. i was following a Youtube tutorial to update my twrp. i followed the instruction diligently. I was running CM 10.1 on the tf201. After the Install I rebooted and now it boot loops. if i hold vol down + pwr button it looks for revovery kernel and then fails. if i hold Vol up + pwr button it vibrates and black screen assuming this is apx mode. i followed ever tutorial on apx and i can't get anything to work. is there any hope for this tablet? Thanks in advance!
Click to expand...
Click to collapse
I have the same issue. Only a black screen on VolUP+Power or The Device is unlocked on VolDown+Power. I can't do anything, the usb driver is not reconize and fastboot or adb shows anything. Please any help to recovery?
Thanks in advance
Another Bricked tf201
Aduniel said:
I have the same issue. Only a black screen on VolUP+Power or The Device is unlocked on VolDown+Power. I can't do anything, the usb driver is not reconize and fastboot or adb shows anything. Please any help to recovery?
Thanks in advance
Click to expand...
Click to collapse
Hello Aduniel: I have essentially the same issue with my tf201. It seems to be hard bricked? (My guess.) If I reboot with Volume Down and Power button, I get a message "This device is Unlocked" in upper left of screen. Also large lettering in center of the screen, "ASUS" and "nNidea Tegra 3" in the lower right.
If I boot with Volume Up and Power button, I get a blank, black screen. (APX mode).
I have set up ADB and naked drivers on a notebook running Windows 7. When I try to connect via fastboot, I get a message <waiting for device>. But it does not connect.
I was wondering if you managed to get your tablet working since Nov. 2013? If so, what did you have to do? I need to know if there is any hope, or have I shot myself in the foot, as they say.
Cheers man,
Jim
Hard Brick TF201
JRKirkey said:
Hello Aduniel: I have essentially the same issue with my tf201. It seems to be hard bricked? (My guess.) If I reboot with Volume Down and Power button, I get a message "This device is Unlocked" in upper left of screen. Also large lettering in center of the screen, "ASUS" and "nNidea Tegra 3" in the lower right.
If I boot with Volume Up and Power button, I get a blank, black screen. (APX mode).
I have set up ADB and naked drivers on a notebook running Windows 7. When I try to connect via fastboot, I get a message <waiting for device>. But it does not connect.
I was wondering if you managed to get your tablet working since Nov. 2013? If so, what did you have to do? I need to know if there is any hope, or have I shot myself in the foot, as they say.
Cheers man,
Jim
Click to expand...
Click to collapse
Hello Jim,
I have the same problem.
I kan also do APX mode but nothing wil work.
If i type apd devices: there is nothing displayed.
Also when I try to flash, it says: waiting for device.
I only once had connection with easyflasher and it saw the TF201: Chipuid: 0x98243044050469391, but later one nothing happend.
I waited for 45 minutes and stil, nothing was done.
I hve been disperate, so can anyone help us, Plaese.
Th TF201 is now dead since oktober 2013, ppfffffffffffffffffffff
Thanks. greetings 5079

[Q] Possibly Bricked - Completely Lost

Hello everyone, been a lurker for some time, but have never needed to post before until today. I'm accustomed to rooting and installing custom roms but I've never had anywhere close to as much difficulty as Im having with this tf201. Heres the situation:
Not sure if you'd call this bricked, as I have total access to fastboot, adb, and CWM Recovery (version 5.8.3.4 touch btw). However my most recent attempt ended with totally wiping from the volume down+power menu (whatever its called). I can not turn the tablet off, as it automatically boots to the asus splash screen (and goes no further, naturally). It is unlocked, and my drivers do work (both fastboot and adb recognize the device), but I can not flash or push anything to the sdcard (with adb its a protocol failure, with fastboot I get "sending zip....OKAY writing zip....FAILED [remote : [FileOperationFailed]]) Don't know if it needs to be said, but I also can't simply drop the file on the sd card as if it were a media storage device as "my computer" does not recognize that it is connected (Oh I am using the naked universal drivers from http://forum.xda-developers.com/showthread.php?t=1998650 )
So yeah, Im at a loss as it seems like no one has had this particular problem before (also my connector cable works fine, so its not that). Any help would, of course, be greatly appreciated.
EDIT: On the tablet after trying to flash with fastboot it returns "Failed to process command flash:zip error (0x30003)"
Really? Not a single person has any idea? Could really use some help here...
GrimAgent said:
Really? Not a single person has any idea? Could really use some help here...
Click to expand...
Click to collapse
You do not flash zips with fastboot.
First of all tell me where your "NVIDIA" logo is when you first power on, bottom center or bottom right?
The nvidia logo is in the bottom center of the "EEE PC Splash"
This is going to sound stupid, but did you verify the MD5 before you tried to flash it?
GrimAgent said:
The nvidia logo is in the bottom center of the "EEE PC Splash"
Click to expand...
Click to collapse
You are still on the ICS bootloader if NVIDIA is bottom center.
Go here http://www.teamw.in/project/twrp2/93 and follow the instructions for "Download - Recovery Image / Fastboot Method (using ICS or JB Asus bootloader)"
You will need to get the ICS blob file. Never flash the wrong recovery for what bootloader you are on or you can brick your device.
If you get it working and you want to upgrade to Jellybean bootloader there is instructions in post 2 of the Hairybean Rom thread. "Upgrade instructions for ICS"
edit.. to make it a bit easier for you.
Get this file http://techerrata.com/file/twrp2/tf201/openrecovery-twrp-2.4.4.0-tf201-ICS.blob
Rename it to twrp.blob
Place the twrp.blob in the same folder as your fastboot exe
Go into fastboot and type
fastboot -i 0x0b05 flash recovery twrp.blob
Wait for it to finish and then type
fastboot -i 0x0B05 reboot
see if that works.
Damn, I had a feeling it was the bootloader issue that I messed up. I went searching all over for how to find out which one I had once I realized my potential mistake. Gonna give these steps a try
I just tried all your steps, twrp is on there and I was able to push both cm10 and gapps onto the tablet, but now the zips I pushed to the sd card arent showing up in TWRP...
GrimAgent said:
I just tried all your steps, twrp is on there and I was able to push both cm10 and gapps onto the tablet, but now the zips I pushed to the sd card arent showing up in TWRP...
Click to expand...
Click to collapse
If you now have twrp on there you dont need to push a file. Place the file on an external SD card on the root and plug it in before starting prime.
When going into TWRP go into install and select external SD. Pick your rom and then flash it.
Thanks a lot flumpster, everything's good now and Ive got cyanogen up and running smoothly. You've brought my tablet back to life and Ive learned a valuable lesson

[Q] Bricked glass please help...

Hi everyone,
Thank you for your time in reading this. I need help with my bricked google glass. Basically I bought a glass not directly from Google 3 weeks ago. Last night I hit factory restore and it shutdown. When it rebooted it just had a white screen displayed. I understand this as the white screen of death after much googling. As I did not get it directly from Google, I do not have support and they will not honor my warranty.
As such I have been trying all sorts of things to restore it to factory and get it to boot up:
I am doing all the activities in OSX.
1. I am able to access fastboot, fastboot devices shows my device serial, however adb devices does not and adb reboot-bootloader cannot find the device.
2. I was able to fastboot oem unlock using ubuntu as there is a known issue running this in osx. All other subsequent activities were done in osx.
3. I was able to download the factory image from the google developer site. I downloaded XE18.11 and XE18.1 as I remember the device updated to XE18.1 OTA.
4. I put the device into recovery mode by holding the picture button, pressing the power button and continue holding the picture button for 10-15 seconds.
5. When in fastboot/recovery mode, fastboot devices works, fastboot reboot-bootloader works but adb reboot-bootloader does not - it does not find the device, neither does adb devices.
6. I can fastboot flash boot boot.img but the next step hangs when I execute fastboot flash system system.img. It just hangs and does nothing. Manually triggering fastboot flash recovery recovery.img works, it's just the system.img that hangs...
However, if I fastboot -w flashall, it is able to send and write the boot, system and recovery images to the device but it still boots to a white screen after. I was expecting it to work and be restored to factory as the image files were successfully written.
The factory image for XE18.11 and XE18.1 contain the files below:
android-info.txt
boot.img
bootloader.img
fpga.img
recovery.img
system.img
userdata.img
xloader.img
7. fastboot flashall only flashes boot, system and recovery. Do I need to manually flash bootloader.img? What is the danger of doing this? I am afraid of touching the bootloader as this is the only thing letting me connect to the device.
8. What about the other image files like xloader.img, userdata.img, fpga.img...do I need to manually flash those as well?
I would appreciate any help from you experts to help me bring this back to life. I can't afford to have a very expensive brick. :crying:
If anyone can help me fix this, I am willing to donate to a charity of your choice whatever I can afford.
I am desperate and willing to try anything...
Thank you everyone!
Apologies to the mods, if this should be in the glass forum, I did not find any technical/help section there so I decided to post it here.
Alex
Any experts out there who can help me please?
i would think that fastboot flash fpga fpga.img would work?
wrecklesswun said:
i would think that fastboot flash fpga fpga.img would work?
Click to expand...
Click to collapse
You're sooooo late bro.
It's almost 3 years ago, you're replying now. :0
sachin n said:
You're sooooo late bro.
It's almost 3 years ago, you're replying now. :0
Click to expand...
Click to collapse
Don't you just love it when you're browsing q&a and see a 3 year old thread?
RAZERZDAHACKER said:
Don't you just love it when you're browsing q&a and see a 3 year old thread?
Click to expand...
Click to collapse
Lol ye. But but wayyyy too late
Glass Enterprise Edition Experience?
sachin n said:
Lol ye. But but wayyyy too late
Click to expand...
Click to collapse
Anyone do something with Glass Enterprise Edition?

Categories

Resources