[Q] Asus TF103C (K010) cant boot - Android Q&A, Help & Troubleshooting

Hello
I got an Asus transformer pad known as K010 model TF103C-1A031A it appears as its stuck at loading (rebooting itself before it loads the system).
I did not root the device or update the system in the past 2 months I was using it,
only thing i have done with it was install few apps like open office and adobe reader as it is mainly used for work.
I have tried to get it into the so called cold boot with no luck ( hold power and vol+ buttons for few seconds )
it does not have any sd cards mounted
searching the forums I have found no similar threads to my problem
is there any way I could actually get the tablet to work again ( and if I can recover the very few documents i have there even better but I'm fine with loosing them )
any help would be appreciated thanks in advance for any ideas

Hi
Thanks for writing to us at XDA Assist. Unfortunately there's no dedicated section for your device on XDA, but please standby while we have your thread moved to the general q&a section here:
Android Q&A, Help & Troubleshooting
Good luck!

Related

[Q] Andrid G510

Hi there,
I'm new to this forum, I have just purchased an Android G510 and can't find very much about it on the net.
So far I have a few questions -
That's if anybody can answer them!
1 Can you instal flash onto this phone?
2 How do I do a multiple list to send a text message?
3 It has 2.3.4 installed could I put a different Rom onto it?
4 Is there any was you can update the processor?
Thanks in advance with any help.
Jim
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Im too wondering about this G510 custom ROM and have been searching every site but with no success . Wish to know more about this device if it support Custom ROM.
Last week I just accidentally delete the stock Launcher. I actually rename it as Launcher.apk.bak and saveit on my SD, but while charging it just shutdown by itself and I restarted but is stuck in Bootloader "ANDROID" . After that I enter the factory mode and Clear Flash. And now i am stuck in Bootloader and dont know what to do. Any help is very appreciated. In some occasion I was able to get into Homescreen by pressing the camera button and holding it for about a minute, but then as there is no launcher i can only see the Locked Homescreen and the Camera from the button. Had i been able to see the USB debugging setting then i believe i can install the Laucher by ADB mode but the only option i see is Connect to USB turn off or on. Thats what i can only access. I can also access the gallery but only pictures and video. Tried flashing but USB not detected. HELP!HELP!
@khup
Did you solve the problem?

IM A NOOB! Help with my Acer Liquid Mini E310 boot up problem.

Glad to be a member of XDA-dev!
Hi guys, I am not sure if I am following the rule of the furom but I dont know what to post for the 10 post rule since " I AM REALLY A NOOB!"
I am new to the android and rooting world. I hope that the Admin and the Mods will be able to understand this post as to what I am getting through right now.
I have a problem with my Acer Liquid Mini E310. I hope that someone will be able to help me here! ( I am sure that someone should have the answer to this)
When a friend of mine introduced rooting to me, I was amaze on what it can change and what it can do to your android phone. I've read xda forum post on how I can root my Acer Liquid Mini E310 and I have also read about the danger it could cause to your device (brick). I did not really put in mind that I will be causing my phone to be bricked since I am sincerely and precisely following all the instructions in everypost that I have gone through. I have rooted my phone in a good way and it worked for 2 months of use, rooted.
There was a time that I've read about font changer on what it could do to customized your phone fonts. I did tried downloading GO Laucher and one of its feature is changing the fonts on the GO Launcher settings page. I was amaze by it and I got the idea of getting my rooted Acer Liquid Mini E310 to change its system fonts. I went to market and downloaded "FONT CHANGER by MARTIN". I applied the settings and the app requested for my phone to be rebooted.
When the phone went to boot up it stuck to the Acer logo with the 3 android icons on the screen. I tried hard resetting it by holding Power, Volume down and Camera button and let it vibrate 3 times. It did reset /data and /cache then reboot but when it boot up it will stay on the same screen with the Acer logo with the 3 androids icon.
I did tried to read some posts here and I got this post about Odin 3. This software needs a .PIT and another file that is needed to be input so that it will be able to download and fix the problem. I dont know which and where I can download those files.
I REALLY NEED YOUR HELP! I know that its a big mistake for me since I didnt really studied rooting before proceeding on rooting my phone but I hope you can help me out on this. I really dont have the financial capability to get a new phone right now. Please guys.
Any suggestions would do. Thanks in advance.
- judajammers
If you have still problem with your device than go to acer site and download gingerbread 2.3.5 version and try to install on your device but before you install on your device you have to swtich your phone to download mode ( Voluem down + Power on key) before do this thing you have to shutdown your phone.
Chiragsilver said:
If you have still problem with your device than go to acer site and download gingerbread 2.3.5 version and try to install on your device but before you install on your device you have to swtich your phone to download mode ( Voluem down + Power on key) before do this thing you have to shutdown your phone.
Click to expand...
Click to collapse
Thanks for the post sir. Is there any further steps that I need to do?

GoClever Tab stuck, no recovery mode nor settings menu

Hi guys,
I spend a lot of time searching forums, Google, and wikis, and didn't find anything what could helped me. So decided to ask you for help.
I got GoClever Tab A93.2 which OS is Android 4 (ICS). Today was trying to do a trick with "vold" (to trick Tab, that it should read my MicroSD card 32GB as main SDCard). And as you can guess, it went very wrong. When Tab rebooted it was kinda freezing, you get couple a seconds to move around and it stucks and returns to the lockscreen, and it's never ending story, tried to reach settings menu, bu unsuccesfully. So then tried to do hard reset (Power buton + Volup). And here comes new problem. There appears Android (bot) lyeing down with red triangle, and recovery menus doesn't appear. After longer time it resets and goes to freezing locking screen.
So I'm asking for your help, because I believe that there's a solution, you guys got much more experience with android than I do. So please help me out here.
Thank you all...

[Q] disgo 8000 help needed

hi im looking for some help with a tablet i recently bought second hand i was told the tablet had crashed during a update and now it loads to the infotmic screen and does not go any where from there i am looking for help as i only own a galaxy tab 3 and kindle fire hd and am stuck is there a way to perform a device reset or some other way of possibly flashing a new os/rom im pretty handy with pcs/ect and am confident with following any instructions any1 could give me just finding it hard to find any info on this tablet it is the 10inch so any help would be appreciated i also have sdk manager and other types of usefull software allready installed on my computer
thanks in advance to any1 willing to help me out with this
ps not sure if i am posting in the right place if a mod knows a better place please feel free to move the thread
also managed to get to the no recovery image found try recover from sd card

Acer Iconia B1 710 (8gb)

Hello,
I've wanted to get back on my tablet to the factory reset state, so I've messed up. I tried first with factory reset/delete cache/data.. But I had deleted some of the system apps (bloatware) so It wasn't factory state.. So I did a research and I found on acer website the original OS for B1 710 so I downloaded it and put it on sd card and from the stock recovery installed it. So now my touch screen doesn't work, so should I call that soft brick? Btw. my tab was rooted with KingRoot
I found plenty of threads on XDA but many of them including unlocking bootloader and installing CWM, the links are down (redirecting to some russian site telling me the site is down). So my question is: How can i restore my tablet to factory state? Flash the original firmware/rom.. I don't have experience with MediaTek chipsets and this kind of devices. So I really don't know what to do to bring my tablet back to working state/factory state..
What can I do?
Please help,
Thank you
- I'm sorry if my thread is in wrong section (I'm new in posting threads in XDA and I despredly need help with my tab)
Same here!
Hi, though it's been a been a few months ago your post was posted but I've got the same problem as you. I rooted my tablet with Kingroot and deleted bloatware apps. I went to recovery mode and tried to hard rest my tablet but same issue. I'll answer within a few days time to let you know any fix. Right now I'm trying to install 3rd party apps to fix my screen but for now I've got some paperweight with me. I'll try my best to fix this issue and hope someone else would help us or what their experiences are like.
Try this: https://forum.xda-developers.com/search.php?searchid=432451738

Categories

Resources