Well....It's finally here folks! The long awaited ZV8-Lollipop!
Brought to you by
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
See Post #2 for addons/additional files
See Post #3 for Install/Rom issues
See Post #4 for modems, rpm/tz partitions, and info. - as of 2-26-15, I would recommend NOT flashing the rpm,tz partitions. If you haven't then don't worry about it.
Anyone can use this as a base to build from. Just give credit.
Make sure you back up your EFS and current ROM first!!! - If you don't know how to backup EFS, look in the FAQ.
What is has:
Bone stock and rooted
Modem and Kernel are included - the Modem doesn't seem to be backwards compatible. It works, but shows as "Unknown"
Install instructions:
1. Flash this in TWRP - MAKE SURE YOU CLEAN FLASH THIS!
In TWRP, select Wipe>Advanced>then select cache, dalvic, data,and system. You can wipe internal and ext SD. BUT MAKE A BACKUP OF YOUR FILES FIRST!! And don't wipe Ext SD with TWRP. Format it FAT32 on a computer.
2. Flash Rom
3. Profit!
After install:
Go to Settings>System Updates> and update profile/prl. You can also go to "Activate this device".
If you do not have Wifi Calling
You will need your MSL number and do the dialer reset. So in the Dialer ##786#. This will wipe your int SD!! And everthing else, so you will be starting fresh.
Bugs:
None that I know of.
Change log:
Initial release
Downloads:
Stock_ZV8_L_Odexed
XDA:DevDB Information
Stock_ZV8_L_Odexed, ROM for the Sprint LG G3
Contributors
engine95, HPTesla, seanskiT!
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Stable Release Date: 1969-12-31
Created 2015-02-14
Last Updated 2015-02-14
Additional Files/Mods
I've combined mixer paths with a fixed build.prop. - Flashable - If you don't want both, then just remove it before flashing.
Mixer_paths are VERY LOUD!! - You have been warned!!
build.prop changes:
1. persist.splitwindow.support_all=false - true
2. ro.lge.qslide.max_window=2 - 8
3. dalvik.vm.heapsize=36m - 512
ZV8_Mixer_build
SD_Card_fix Flashable in TWRP - If this doesn't work, Some people are using an app from the Playstore to fix SD issues. SeLinux Changer, and set it to permissive.
EXTREME_ZV8_mixer paths - I AM MOST DEFINITLY NOT RESPOSIBLE IF YOU FLASH THIS ONE!!! Use at your own risk.
Install/Rom Issues Read This
Modems and rpm, tz partitions
Modems and rpm, tz partitions - FLASHABLE
If you guys need the modems for any of our Roms, Here they are.
Modems Folder This is the folder that has all the modems. Choose which one you want. It also has Apn's from the past.
The KK and L modems don't seem to be compatible.
RPM and TZ PartitionsTo be used with the corresponding modem above.
These are kind of up in the air, and for now are considered Beta. Although I have been using them with no issues.
History
After doing some reading in the International Forums, Cloudya recommends that we use these 2 partitions for a better Lollipop experience. I can't find the post now, and I have know idea what he meant. But I figured we could try it out.
Read here, near the bottom. http://forum.xda-developers.com/showpost.php?p=57541255&postcount=428
Make sure you use the corresponding modem for these. - It SHOULD still work fine, but just be warned.
The ZV4/6 seem to work better for us
ZV8 rpm, tz partitions
ZV4/6 rpm, tz partitions
Hell yea!
Flashing now! Thank you, thank you, thank you!!
Thanks for putting this together. Can't wait for the deodex. Will the stock zv6 volume mods work with zv8?
Thank u so much dude!!
Downloading now.. Can't wait
Sent from my LGLS990
goatman101 said:
Thanks for putting this together. Can't wait for the deodex. Will the stock zv6 volume mods work with zv8?
Click to expand...
Click to collapse
The deodex might take a while. I looked at it briefly and it's quite different from past Android versions. But I will be making one shortly. Next project, actually.
I don't know about the volume mods yet either. I'd say for now don't use anything from KK. This thing is all new and very different.
Is there a way to get msl without calling sprint??
Great work, again, @engine95 is root baked in, or no root yet? Sorry, don't see it mentioned yet.
This is your valentines gift to the community ? Lol
(3 posts til someone says 'be mine' hahaha)
NVM about root. Found answer in gen section. Thanks @RandomPookah
Lurien said:
Is there a way to get msl without calling sprint??
Click to expand...
Click to collapse
Yup. Look here. http://forum.xda-developers.com/showpost.php?p=54912206&postcount=4
scottspa74 said:
Great work, again, @engine95 is root baked in, or no root yet? Sorry, don't see it mentioned yet.
This is your valentines gift to the community ? Lol
(3 posts til someone says 'be mine' hahaha)
Click to expand...
Click to collapse
Thanks.
Yes, it has root already. I still need to fix the OP
Yup. We have "L" for Love-day
I'm your Huckleberry. LOL
Ok I'm done now.
Everything works beautiful!
Changed my dpi to 560, and switched to aosp lollipop emjoi's
<3 the camera.
Downloading and flashing now. Does this come with a new modem/firmware like ZV6 did?
Thanks for all your hard work on this!
ssmercurys said:
Downloading and flashing now. Does this come with a new modem/firmware like ZV6 did?
Thanks for all your hard work on this!
Click to expand...
Click to collapse
Not my day. Forgot to add that too. I'll update the OP. Modem and Kernel are included.
BTW. The modem doesn't seem to be backwards compatible. It works, but shows as "Unknown".
Edit: Its doing its thing. Thanks!
Im used to HTC devices so some things are new to me
Sorry for the silly question but should there be any problem restoring my backup?? Just in case something goes wrong...
Lurien said:
Sorry for the silly question but should there be any problem restoring my backup?? Just in case something goes wrong...
Click to expand...
Click to collapse
No... There will be no any problem to restore it. JDI
Sim card
Doesn't recognize my gsm SIM card
Just installed. Very smooth so far!
Related
Hello guys,
Now we can try Android 5.0 on our LG Optimus G (I'm using it on E970).
Thanks a loooooot to @Kevinjoa for his port.
Thanks to @KevTheGuy for his detailed info about this port.
***CAMERA is working fine, including 'lens blur' feature***
***Don't flash any GAPPS
***Flash the kernel (linked below)
***TWRP is the preferred recovery method
Caution:
NFC not working.
SD Card can not be mounted.
Link to the original posts:
From XDA
From another blog
*Download the latest release from HERE
*Flash this KERNEL
*Flash SuperSU to get root access.
Instructions:
1. Backup your current ROM
2. Wipe 'System', 'Data', 'Dalvik Cache' & 'Cache'
3. Flash the ROM -> Kernel -> SuperSU. One by one.
4. Wipe 'Dalvik Cache' & 'Cache'
5. Reboot & give it atleast 5 minutes for 1st boot.
Google Now Launcher (Andorid 5.0) link:
http://www.dropbox.com/sh/1u17g3me7y308mo/AADNYxVzkfVbsKPnXYjIb5_Ea?dl=0
Other Google Apps (Android 5.0) link: (Just install 'Gmail, Calendar for material design experience. Other apps already installed in the ROM)
https://www.dropbox.com/sh/m8rw7h4rytjbo7d/AAD4TOXeQuCtpoMR9z1jlA27a?dl=0
Thanks
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you going to try it.. Need to found some fix to sd its very important
danielad200 said:
Thank you going to try it.. Need to found some fix to sd its very important
Click to expand...
Click to collapse
You are welcome . Yeah, I'm looking for that too.
is the camera working correctly on geeb?
The builds provided in the link you posted are from @Kevinjoa , and he has a thread on the Sprint LG Optimus G forums (http://forum.xda-developers.com/optimus-g-sprint/development/port-android-l-preview-gee-t2818325). There are more posts and active members there, so anyone that wants to know what's up should head there.
Also, Data doesn't work with kernelgeeb.zip on release 17 (just tested it)
You can get Data and camera to work on release 17 (or any Kevinjoa's builds i think) with this kernel (https://mega.co.nz/#!VNcRCCiK!I0cV-A1MgcEsTWsx07zVmxEDGgQIjt7DjP_dEqY_WwU) but then wifi doesnt work. Right now I'm experimenting replacing some wifi files in the rom to see if wifi works with the jollaman's kernel provided above.
I'll report back as soon as I can.
And btw thanks for creating this thread here on e970 forums, I don't think everyone knows about the Spring OG thread
EDIT2: Well turns out making a flashable zip isn't as simple as I thought xD
EDIT1: Ok so I got Wifi, Data, and camera working on release 17 with jollaman's geeb kernel for L, though autorotation gets bugged most of the times i think.
For those interested:
I took all wifi-related files in this rom (https://mega.co.nz/#!xB9xGSpK!kGCJo_GiLqRhPneqbv95xckbSmL2UMQbs7kdn0kZyAU)
from these folders:
\system\etc\wifi
\system\vendor\firmware\wlan\prima
\system\etc\firmware\prima
and copied them to the respective folders in release 17 rom.
Then I flashed the modified rom file and the jollaman kernel.
I can try to make a flashable zip of the wifi files, though i have never done it before.
And also, I read that jollaman999 is working on v12 of his kernel which would be compatible with Lollipop, so in the meantime if you want jollaman's kernel features then this is the way to go
uumeshh said:
is the camera working correctly on geeb?
Click to expand...
Click to collapse
Camera is working, including 'Lens Blur' feature.
KevTheGuy said:
The builds provided in the link you posted are from @Kevinjoa , and he has a thread on the Sprint LG Optimus G forums (http://forum.xda-developers.com/optimus-g-sprint/development/port-android-l-preview-gee-t2818325). There are more posts and active members there, so anyone that wants to know what's up should head there.
Also, Data doesn't work with kernelgeeb.zip on release 17 (just tested it)
You can get Data and camera to work on release 17 (or any Kevinjoa's builds i think) with this kernel (https://mega.co.nz/#!VNcRCCiK!I0cV-A1MgcEsTWsx07zVmxEDGgQIjt7DjP_dEqY_WwU) but then wifi doesnt work. Right now I'm experimenting replacing some wifi files in the rom to see if wifi works with the jollaman's kernel provided above.
I'll report back as soon as I can.
And btw thanks for creating this thread here on e970 forums, I don't think everyone knows about the Spring OG thread
EDIT2: Well turns out making a flashable zip isn't as simple as I thought xD
EDIT1: Ok so I got Wifi, Data, and camera working on release 17 with jollaman's geeb kernel for L, though autorotation gets bugged most of the times i think.
For those interested:
I took all wifi-related files in this rom (https://mega.co.nz/#!xB9xGSpK!kGCJo_GiLqRhPneqbv95xckbSmL2UMQbs7kdn0kZyAU)
from these folders:
\system\etc\wifi
\system\vendor\firmware\wlan\prima
\system\etc\firmware\prima
and copied them to the respective folders in release 17 rom.
Then I flashed the modified rom file and the jollaman kernel.
I can try to make a flashable zip of the wifi files, though i have never done it before.
And also, I read that jollaman999 is working on v12 of his kernel which would be compatible with Lollipop, so in the meantime if you want jollaman's kernel features then this is the way to go
Click to expand...
Click to collapse
I'm on E970 & camera, wifi worked perfectly. But thanks a lot for your detailed post. Is there any patch for SD card & NFC? Except these 2 things, this ROM is not bad!
mtatohin said:
I'm on E970 & camera, wifi worked perfectly. But thanks a lot for your detailed post. Is there any patch for SD card & NFC? Except these 2 things, this ROM is not bad!
Click to expand...
Click to collapse
Not yet. That's what's keeping me from using this rom as a daily driver :c .
I guess Jollaman's kernel v12 will fix those issues, but as far as I know, there is no word on when he's releasing it
KevTheGuy said:
Not yet. That's what's keeping me from using this rom as a daily driver :c .
I guess Jollaman's kernel v12 will fix those issues, but as far as I know, there is no word on when he's releasing it.
Click to expand...
Click to collapse
are you sure? v12 is here for geeb
http://buf.jollaman999.com/jolla-kernel_AIO-gee/
samuel3mn2 said:
are you sure? v12 is here for geeb
http://buf.jollaman999.com/jolla-kernel_AIO-gee/
Click to expand...
Click to collapse
EDIT: Well the v12 does have the option for android L kernel, but then wifi and data dont work, and still no SD card mounting : |
Wou that's new. sorry, I'll edit my post, and try it on android L release 17 to see how it goes.
according to jollaman999 camera is working and he added sd card init lines for geeb (http://forum.xda-developers.com/opt...el-jolla-kernel-cm-based-roms-t2851612/page46).
Sd card still not working with the new kernel
I am was install the kernel camera works perfectly but 3g data is dissaper
How stable is this to use as an everyday?
@mtatohin,
Nice work on the post
I tried the Android L Porting with Kernel "jolla-kernel_AIO_V12_Rev2-geeb,e970" and finding trouble in.....
---------------
1. No reboot option.
2. Camera can't connect error.
3. NFC Not working.
4. Data connection not working. Tried the steps to manually add the APN's but still problem exists.
5. SD not Mounted.
---------------
I did a clean install.
Please help for the above with any fixes.
Thank you.
P.S You are doing a Good Job.:good::good:
Is there no way to enable sad card?
Mikeandrd2292 said:
Is there no way to enable sad card?
Click to expand...
Click to collapse
As been mentioned many times in this thread, no. It might require a framework modification.
Amazing work!
Rockwig said:
As been mentioned many times in this thread, no. It might require a framework modification.
Click to expand...
Click to collapse
Is there no way to enable the happy card?
Sent from my AT&T LG Optimus G
plaster said:
Is there no way to enable the happy card?
Sent from my AT&T LG Optimus G
Click to expand...
Click to collapse
You could try decompiling the framework-res.apk and then modifying the file "storage_list.xml" in "res/xml/" and add the proper values, something like:
"<storage
android:mountPoint="/storage/sdcard1"
android:storageDescription="@string/storage_sd_card"
android:removable="true"
android:maxFileSize="4096" />"
(from https://source.android.com/devices/tech/storage/config-example.html)
after the existing entry in there.
Then you would need to recompile the .apk and add that to the device.
After that, it might show up (with the right Kernel).
Rockwig said:
You could try decompiling the framework-res.apk and then modifying the file "storage_list.xml" in "res/xml/" and add the proper values, something like:
"<storage
android:mountPoint="/storage/sdcard1"
android:storageDescription="@string/storage_sd_card"
android:removable="true"
android:maxFileSize="4096" />"
(from https://source.android.com/devices/tech/storage/config-example.html)
after the existing entry in there.
Then you would need to recompile the .apk and add that to the device.
After that, it might show up (with the right Kernel).
Click to expand...
Click to collapse
thanks for this..
will try soon..
i read that for proper ad card support we neen to mod kernel, framework-res.apk and platform.xml..
will you tell us what we need to do with kernel and platform.xml ?
Well here's the continuation of Barren, but now with ZV6.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Proudly Presents...
BarRin
What is has:
This Rom will install the modem, kernel, and the Rom
Rooted
busybox
zipaligned
V2 - init.d support through the kernel
Install
In TWRP, select Advanced, Wipe, then /system, /cache, /dalvic, and /data. DO NOT select internal or ext SD!
Flash Rom
Update profile/prl
Go to "Settings, More, Mobile network, and select anything but "Global
Change logs :
Code:
[B]V3.0.1[/B]
Just an update that is mostly Themed. Flash V3, then this. This works without xposed. So it MAY work with any ZV6 Rom.
Themed Messaging. No more Gawd Awful Yellow!!! Blends with stock theme now.
Themed Navbar - To get the Navbar to work with apps, Select "White Gradation" in Settings>Display>Home Touch Buttons>Color.
New bootani. - Courtesy of @HPTesla
Added oversharpening script from Skin1980 to the kernel. - so, new Stock kernel.
[B]V3[/B]
Updated SuperSU so we shouldn't have to update binaries - installs a whole different way
Stock ZV6 kernel with init.d and kexec support - MultiRom compatible
Native host files - you don't need an ad blocker app anymore
executable zipalign binaries - it'll run in terminal
Updater-script will delete a lot of junk files now
Qslide fix for WIFI calling - no longer stuck at the 4th slot
build.prop changes - removed some, fix a couple
init.d scripts - removed a couple that weren't doing anything
Most of everything since V2
This took a lot of work so there's probably other small things I forgot
V 2.3.1_beta
This can be used on any stock ROM and any ZV6 version.
1.Using the APN from Vanir as it's the most thorough one out. It SEEMS to give better reception for phone, data, and the handshake between LTE/eHRPD/3G is better. THIS is why this is beta. [B]You must have your phone all setup before using this!!![/B] It will not work on a fresh install. Also, it doesn't allow APN changes other than Sprints. Hotspot MAY work but unknown.
2. Removed MLT, and LGLIA apk's. More LG tattletales.
3. Fixed a couple of my goofs in build.prop. Got rid of the hiccup as I call it.
4. Added LG KB Black Theme for those that use LG KB.
5. init.d script changes
V 2.3 Includes everything from V2, and
build.prop edits for battery, speed and reception
Added LG FM Radio to /data (uninstallable) - It requires the headphone but will play through the speakers when plugged in. Headphones seem to act as the antennae. Thanks to @anvicota for this
Updated Sprint VoiceMail
V2.2 -Includes 2.1 plus-
Hopefully fixed install of bootani for people coming from Stock or Flashtool
Modified platform.xml - SD card fix?
Modified mixer paths- less increase on BT only. - Hopefully fixes distortion some were having
Install of Rin Kernel - installing a different way for the very few - again, hopefully
build.prop to reflect BarRin_2.2 in Software info
V2.1 - New Rin Kernel and BarRin bootani.
V2 - Like the original Barren. Nice and slim.
Removed most all, LG, Sprint apps
Added xposed and Tweakbox - removable
Some apps moved to /data
init.d scripts
Increased and FIXED Aux_out mixer path
Now installing with "Rin" kernel.
V1
Many apps removed but still giving the LG Stock experience. Still has Concierge, Smart Cards, Weather, OK Google on all screens, etc
A few build.prop mods - LG's mistake, All split window apps
Sd card fix
mixer_paths
Updated LG Keyboard, Quickmemo, Sprint voicemail - all can be uninstalled
Donators - ( Never asked for, but very much appreciated. Thank you )
Previous Barren
** @mjjcb
** @nkyer
BarRin
* @mjjcb
* @Kemocybr
Downloads:
______________________________
BarRin_D_V3.0.1 - Just an Update. Flash V3, then this. See Changelog.
BarRin_V3 - This is the full ROM. ZV6 Multirom Kernel, Modem included. Strongly suggest a CLEAN INSTALL! AND MAKE SURE YOU DISABLE ANY "SET ON BOOT'" OPTIONS YOU HAVE IN TRICKSTER/FAUX!!
- You can read this also if you'd like. Ramblings of this Stooge
BarRin_2.3.1_beta This is NOT a rollup of the previous. This is considered beta for now and can be used on ANY stock ROM. See change log above.
BarRin_2.3 - Must have at least V2 installed. Then flash this. It has everything up until now.
Barrin_2.2 - Another update. You must have V2 installed first, then flash this. If you installed 2.1, update to this as there were some changes we need.See change log - READ HERE for more info/fixes - Also, Software info is going to say "BarRin_D_2.2 regardless. Sorry bout that.
BarRin _2.1 - This is just an update. You must have BarRin V2 installed first. Then flash/update to this. This is just an update.
BarRin _D_V2
BarRin_O_V2
BarRin_D_V1
BarRin_O_V1
XDA:DevDB Information
BarRin, ROM for the Sprint LG G3
Contributors
engine95, HPTesla, seanskiT!, Tectas
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: Stock
Version Information
Status: Stable
Created 2014-11-23
Last Updated 2015-01-21
Added files and extras
BarRin V1 to BarRin V2 for Concierge/Weather
You'll need to flash either BarRin V1 Odexed or Deodexed first. Then flash this. This SHOULD work on both and update you to V2.
I'm not supporting this, so if you install it you're on your own. That's just because I'm not including it since V1.
BarRin_2.2_mixer_paths - Same as below, but with less BT increase. Some were getting distortion.
Fixed Aux-out mixer_paths
This will update ANY ZV6 mixer paths to increased volumes.
Stock_ZV6_mixer_paths
Stock ZV6 Kernels
Stock and Stock with init.d support.
1-21-15 -And now with MultiRom support
Flashable APN's
Flashable_Stock_Hosts
Issues/Fixes
SD cards
SD cards are becoming an issue for some reason. If you've followed ALL the instructions in the OP, and are still having issues, you may need to wipe your ext SD. And sometimes Internal as well.
Remove your ext SD and boot up.
If the problems are solved then you need to format your SD card in Windows or Linux as Fat32 no matter what size your card is. DO NOT USE TWRP to format Ext SD.
Root
If SuperSU has issues updating it's binaries, you may need to flash This when you flash the ROM.
Thanks Holmes. Downloading now.
One more...just in case
Thanks Team Stooge. Downloading now, will report back with any issues I come across.
After boot getting android process error. Cant get past selecting language selection
ssaggy said:
After boot getting android process error. Cant get past selecting language selection
Click to expand...
Click to collapse
Check your md5 and or re-download. I personally recommend downloading to pc then move to phone. I have flashed it about 4 times since last night and no issues like that. Be sure to wipe cache, dalvik, system and data.
Any major upgrade to Barren3 with Rin1.8?
gorillaz1 said:
Any major upgrade to Barren3 with Rin1.8?
Click to expand...
Click to collapse
Right now nothing major, just using ZV6 as a base. And right now only has stock kernel. New Rin is in the works.
Roger that. I'll be patient then. Keep up the great work!
Running great. Thanks guys.
Does this zip include the new radio?
Sent from my LG-ls990 using XDA Free mobile app
chrisctb said:
Does this zip include the new radio?
Sent from my LG-ls990 using XDA Free mobile app
Click to expand...
Click to collapse
It's in the OP. Yup
Just so you guys know, read this. http://forum.xda-developers.com/showthread.php?p=56991878
This won't effect this rom too much as @HPTesla had the kernel about ready for Primtime.
But it does/will effect the future of our beloved G3. When we finally get L, were screwed. Just thought I'd let you all know.
engine95 said:
It's in the OP. Yup
Click to expand...
Click to collapse
Apparently I can't read haha thanks
Sent from my LG-ls990 using XDA Free mobile app
engine95 said:
Just so you guys know, read this. http://forum.xda-developers.com/showthread.php?p=56991878
This won't effect this rom too much as @HPTesla had the kernel about ready for Primtime.
But it does/will effect the future of our beloved G3. When we finally get L, were screwed. Just thought I'd let you all know.
Click to expand...
Click to collapse
That's horrible.
Mahapederdon said:
That's horrible.
Click to expand...
Click to collapse
Tell me about it. It's friggin ridiculous what some people try and pull.
I started looking at n6. If I bought on from Sprint to play with is there gonna be any kind of lock. Or is it strait forward. I still love this phone but reading that article made me a little nervous.
So when we actually do get an official L there's no way of making it flashable?
[ROM][3/26/15] Pure AOSP ROM -★| 5.1.0_R3 | LMY47I | Build #6 | Proof of concept! |★-
Pure AOSP for the Nexus 6
Preface:
This is meant to be a Pure AOSP build with just minor edits to stop the stock recovery from replacing custom recovery, add some Google edits to the ROM for GPS, and modify the ramdisk so as not to preclude it from being rooted! Its not meant to be a fancy ROM, its just meant to be a baseline AOSP ROM. This ROM was produced by following the steps in the build guide I wrote. See post #2 for build guide links!
Install Instructions
Must have custom Recovery on unlocked device
Copy ROM to device (Gapps and root too!)
Reboot to recovery
Choose Factory reset (TWRP, not sure what CWM is)
Choose Install ROM
Now you can install the Gapps, and Root if you desire!
Specs and Download Link!
Android Build Version: 5.1.0_R3 / LRX22G
Current Build Date: 3/26/2015
Download: HERE!
Recommended Add-Ons
SuperSU by Chainfire here: SuperSU Stable Version
PA Gapps here: [GAPPS][5.0.x][BETA] OFFICIAL Up-to-Date PA-GOOGLE APPS (All ROM's)
Change Log
1/19/15 - Build 6 - Complete rebuild as proof of concept for 5.1.0_r3. This is PURE AOSP with no edits and no fixes.
1/19/15 - Build 5 - Fixed Youtube, Net flix DRM play back issue. Thanks to @sykopompos for pointing me to @ayysir git hub for the fix by @BeansTown106
1/17/15 - Build 4 - Fixed Browser force close in settings.
12/19/14 - Build 3 - Updated to Android 5.0.2_r1
12/15/14 - Build 2 - Switched back up to block based build for installation speed! Thanks to @hlxanthus for the 411!
12/14/14 - Build 1 - Initial build
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Build Guide Link
Want to build this exact ROM yourself?
Here is a great build guide I wrote: [Guide][1/19/2015] Building AOSP for the Nexus 6!
Change Log
Add-Ons
Sprint Data connectivity linked by @orlzzt is HERE!
Reserved!
Hmm... I'll take this for a spin later. Thanks!
Is it safe to say with this being pure aosp shamu that it is still set to force encryption?
Also, the drawback of not doing the block style flashable is it takes several times longer to actually install via recovery.
hlxanthus said:
Is it safe to say with this being pure aosp shamu that it is still set to force encryption?
Also, the drawback of not doing the block style flashable is it takes several times longer to actually install via recovery.
Click to expand...
Click to collapse
Yes. Its pure AOSP.
Can you give me a calculation of time to install block based and file based ROM? Several times longer is a strong statement. If you could produce factual data I would appreciate.
However I am still not going block based installs because the user can take this ROM, add or remove things before it is even installed.
But I look forward to the numbers you show me! If you dont have the data that is fine. I can change the false to try in the script ota_from_tools and test it myself. Should only take a few minutes to recompile as block based.
But thanks for the input!
Took like 3-5 minutes to install your ROM and maybe 20 seconds to at most a minute to install either rastapop or cm12alpha. Honestly I thought it stalled or failed so I rebooted recovery and installed just your ROM (instead of gapps together via twrps) and it simply takes a LONG time to flash.
Great to finally see you here scrosler!!! Always great to welcome another knowledgeable developer to the forums
hlxanthus said:
Took like 3-5 minutes to install your ROM and maybe 20 seconds to at most a minute to install either rastapop or cm12alpha. Honestly I thought it stalled or failed so I rebooted recovery and installed just your ROM (instead of gapps together via twrps) and it simply takes a LONG time to flash.
Click to expand...
Click to collapse
The exact numbers your reported time can vary buy almost 66%! Thats a huge variance.
Also, you are testing differnt ROMS. For a control I need to build this exactly as it is but block based.
I will test it on my device with a high end chronograph and report my results.
Also, what recovery are you using?
Ok, I timed the file based intall, it was 2:16.08 (which was closer to your 3 minute estimate but a far cry from the 5 minute estimate)
I will build a block based ROM tonight and test to see the difference. However its still very unlikely I would change the current set up. Although I could just post both! :highfive: Win Win for everyone :good:
But once again! Thanks for your input!
scrosler said:
The exact numbers your reported time can vary buy almost 66%! Thats a huge variance.
Also, you are testing differnt ROMS. For a control I need to build this exactly as it is but block based.
I will test it on my device with a high end chronograph and report my results.
Also, what recovery are you using?
Click to expand...
Click to collapse
I can time it if that helps, or you can test yourself if you would rather. As for recovery, the only one I know of is twrp, downloaded directly via their website (only one version there) and manually fastbooted in place.
hlxanthus said:
I can time it if that helps, or you can test yourself if you would rather. As for recovery, the only one I know of is twrp, downloaded directly via their website (only one version there) and manually fastbooted in place.
Click to expand...
Click to collapse
We are cross posting. I timed it myself and it was just a hare over 2.25 Minutes. Which is not that far off from your assert of 3.0 minutes.
Im going to build the block based tonight and post it so people can have both options.
You brought a valid point. Once again, thanks for your input!
Edit: Also, wasnt trying to beat you up, I just like solid number comparisons.
Haha no worries, us old optimus s veterans need to stick together ?
Edit: if you wanted to remove the force encryption, it is a very simple fstab.shamu edit. Under the /userdata line, change "forceencrypt" to "encryptable". Looking at a few rom sources, that is how they all do it. That way if you are encrypted you will stay encrypted. If not, then it wont force encrypt you. Would save people from having to flash an alternate kernel . .
hlxanthus said:
Haha no worries, us old optimus s veterans need to stick together ��
Edit: if you wanted to remove the force encryption, it is a very simple fstab.shamu edit. Under the /userdata line, change "forceencrypt" to "encryptable". Looking at a few rom sources, that is how they all do it. That way if you are encrypted you will stay encrypted. If not, then it wont force encrypt you. Would save people from having to flash an alternate kernel . .
Click to expand...
Click to collapse
OMG!!! Optimus S? Are you serious? That was my first Android Phone / ROM!
Yeah, I know how to shut it off. But i wanted to leave this as close to pure AOSP as I could. I think I will shut it off on the next build though. I heard the encryption can slow things down a hair too.
Ok, I just got lost reading comments. Is this encrypted? If it is, does anyone mind letting me know what to do BEFORE I flash to decrypt.
Ty.
gcng said:
Ok, I just got lost reading comments. Is this encrypted? If it is, does anyone mind letting me know what to do BEFORE I flash to decrypt.
Ty.
Click to expand...
Click to collapse
You just flash a no force encrypted kernel which I basically any of them. And as @scrosler just said he may just build it into the next build.
---------- Post added at 02:55 PM ---------- Previous post was at 02:53 PM ----------
And yes, same user name over at android central, I had DanteRom that I released. ?
EDIT:
DAMN! There is no comparison from Block Build and File based build
Block build was roughly 2 minutes and 30'ish seconds
Block based build was 10'ish seconds!
Hey Scott glad you are building for the nexus 6 are you planing on a Clean Rom also? Or just keeping it aosp
scrosler said:
OMG!!! Optimus S? Are you serious? That was my first Android Phone / ROM!
Yeah, I know how to shut it off. But i wanted to leave this as close to pure AOSP as I could. I think I will shut it off on the next build though. I heard the encryption can slow things down a hair too.
Click to expand...
Click to collapse
I'd say leave it encrypted for now until faux finally makes it to the threads...from his g+ posts it seems his found a way to keep the device encrypted yet have around the speed as though it was unencrypted. And he's a very open source guy so I'm sure he'll share the magic
I bring to you 100% stock fully deodexed builds of Lollipop 5.0 (N900PVPUEOC5) for the Sprint Galaxy Note 3. The ROM is built from the official Samsung tar. It will self root upon flash and has init.d/busybox support. Knox has been removed completely. There are two versions of the stock deodexed ROM. The difference is one uses a normal edify recovery script and the other uses aroma installer. Both ROMS are identical otherwise. The purpose of the aroma installer is for future rom chefs to customize their rom builds using aroma installer if they so choose. This stock ROM includes all pre-installed Google & Sprint apps. Nothing has been removed or modified from stock. Also included is the OC5 kernel and modem & HLOS patch to ensure you have the latest kernel and modem with this ROM upon flash.
The ROMs are stock and will stay that way. Please don't ask for mods, changes, etc in this thread. These roms are intended for those people who want the stock ROM in it's original form with the addition of root and removal of Knox as well as other dev's/chefs who need a good solid base for their own ROM project. I give permission for other dev's to use this rom as your base and I highly recommend that you do so because it is bug-free and built from the official Samsung .tar. However, I do expect credit if you use this rom for any other project. If you appreciate my work please press that Thanks button and consider making a kind donation. using the link under my profile pic. Enjoy!
Important Note: Before flashing ANY Lollipop ROM. including this one, you MUST first have done one of the following: Taken the Lollipop ota update OR odin flashed the stock N900PVPUEOC5_N900PSPTEOC5_N900PVPUEOC5_HOME.tar. If you are still on a KK based rom (including any KK AOSP/CM based roms) then you MUST first update to Lollipop by one of the two methods I mentioned BEFORE flashing this ROM.
Flashing instructions: ***Before beginning the flash/setup process MAKE SURE your battery has at least 50% charge and/or connected to the charger!!!***
1. Backup anything you don't want to lose off your internal storage to another location.
2. Download the ROM using your pc. (downloading with your phone has a much higher risk of file corruption. Not recommended with large files).
3. VERIFY the md5!!! Once the download has finished, compare the AFH md5 using a md5 tool on your pc. (Google is your friend).
4. Put the downloaded ROM onto your internal storage or external micro sd card.
5. With phone powered off, reboot into recovery by pressing and holding volume up, power and the home button until you see the samsusung logo then release all buttons.
6. Once in recovery choose the wipe button and do a factory reset three times. Optional but recommended is to do a "Data" wipe. This will wipe all of your internal storage so MAKE SURE you backed up first like i said in step #1 above! Then go to "advanced wipe" and select all of the partitions EXCEPT micro-sd card and internal storage. Internal storage is optional but recommended on first time flashing Lollipop.
7. Choose the "Install" option and select the ROM "STOCK_DEODEXED_N900PVPUEOC5" from either your internal or external micro-sd card. It will flash the rom and give a confirmation once completed.
8. Press "Reboot" then "reboot system".
9. Initial rom setup will take several minutes and remain on the yellow Sprint Spark screen for several minutes (definately much longer than what you are used to). Let the phone setup/optimizes and the screen WILL eventually turn off once it finishes or show the setup wizard.
10. When you see the screen turn off or the setup wizard, you can begin setting up your phone for first boot.. Once finished with setup wizard wait a few moments and the phone will automatically install the sprint apps. You must either "accept" or "disagree" with each and every google prompt for these apps or else the installs pause untill you do so.. Also you will be prompted for the "connections optimizer". Quickly set it to what you want and close it. That's it! You're done!
flashing anything on your device is done at your own risk. There is no way myself or any other developer can guarantee that flashing this ROM or any other file will not brick your device or otherwise cause some other type of damage. This is just a standard warning. I am not responsible for anything that you do to your device. However I do my best to ensure all of my roms, mods, etc are 100% safe and fully tested before allowing public access.
Downloads
STOCK_DEODEXED_N900PVPUEOC5STOCK_DEODEXED_N900PVPUEOC5-AROMA
XDA:DevDB Information
STOCK_DEODEXED_N900PVPUEOC5, ROM for the Sprint Samsung Galaxy Note 3
Contributors
tx_dbs_tx, Chaz187, evilvoice, Josephigloe, SupermanTW
ROM OS Version: Lollipop
ROM Firmware Required: OC5
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2015-06-11
Created 2015-06-11
Last Updated 2015-08-02
Reserved
Reserved
Waiting for the games to begin.......
Awesome work man thanks for all you have done for us!!!!!
Thanks,
Chaz187
@tx_dbs_tx thank you for all your hard work. It is much appreciated. It was a pleasure testing. Just let me know if you need anything else.
Thank you for all your hard work and late nights...we'll done.
brilliant. our community needed this.
as promised, donation incoming for your efforts.
(sorry it cant be more, you deserve it. everyone should be aware that this dev has done us a HUGE favor.)
Code:
9XT69614RJ7600116
Thank you!!!
Awesome glad to see its up and running!! Great work to all that were involved. I wish I could of been more help
Nice work everyone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you dev!
great job
Totally awesome much respect
Sent from my SM-N900P using XDA Forums Pro.
Thanks so much ....All
Thank you for your hard work and bring this to the table. Can't wait!!!! Has it been 24 hours yet? Please day yes!
Goat1378 said:
Thank you for your hard work and bring this to the table. Can't wait!!!! Has it been 24 hours yet? Please day yes!
Click to expand...
Click to collapse
Link is open already!!!
Chaz187 said:
Link is open already!!!
Click to expand...
Click to collapse
I know 39 percent downloaded! Lol
Thanks a mil. I tried cooking my own odexed version about a week ago but couldn't get it to boot past the Yellow sprint screen. Now I'm questioning if I just didn't wait long enough.
mid3vil said:
Thanks a mil. I tried cooking my own odexed version about a week ago but couldn't get it to boot past the Yellow sprint screen. Now I'm questioning if I just didn't wait long enough.
Click to expand...
Click to collapse
It was a process to get it up and running.... but we took the time to make it right!
Thanks,
Chaz187
Update: Rom link is down so see the original author's thread for latest update and info
Here
MIUI Rom has been ported for LG G2 and all variants are supported. It is not ported by me and, I have no connection with any of the dev, I am just spreading the news. If developers don't like it that, I will remove this thread. So just take it as a news.
Source:
Here is the true origin of Rom --> Here/
Info:
As it is MIUI 8 so it is based upon Android Marshmallow version 6.0.1. So you can expect many new features.
Google play services and play store are included in this rom, So no need to flash any gapps.
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Link(s):
1: Rom
Mirror: Mega
2: Kernel (For better performance).
3: Supersu
4: SupersuFix
Sound fix: (Thanks to zg85).
For those having no sound issue, Try flashing this modem. (Currently for D802 only. Searching for other variants fix. If anyone have other please tell.).
Here.
Important:
For those with device running Lollipop or other bootloader than Kitkat you can follow this thread to change bootloader to kitkat.
Here.
And
For baseband, You can check this out. (I have not tested any yet, But please tell me if this can solve issues).
Here.
Instructions:
1: Boot into TWRP.
2: Make full wipes. (Leaving internal storage).
3: Flash the rom zip. Select your model. Wait till finished. Don't reboot into system.
4: Flash the kernel after rom installation is completed.
(You need to be at kitkat bootloader and also required baseband of kitkat model for sim to work. So make sure you have all these things
5: Flash supersufix then supersu to get root.
First boot takes some time, So wait at least 15 to 20 minutes for first time.
Disclaimer:
I'm not developers of this rom and any other thing related and mentioned here. So don't complain about any thing. You can ask for help and I will try to help (If i can). But I'm not responsible for any damage to your device or any other things.
Thanks in advance for not complaining me.
Press Thanks button if, I helped you.
Thanks to:
@Cloudyfa for basebands.
XDAVN team for origin of this rom.
Any one other who did any thing for this rom/thread, directly or indirectly.
Most Important:
It's look like that the original developer has created his thread for this rom. So All can find latest fixes and support there.
Here is the Link
http://forum.xda-developers.com/lg-g2/development/mm-miui8-lg-g2-t3502836
Hello, i flashed the rom via TWRP with following the instructions, it has been like 40 minutes and it still not booted. Any idea?
Screen is like:
Fastboot mode started
reset
portcharge
reset
portcharge
STALL GET_DESCRIPTOR 128 6 1006 0 255
fastboot: processing commands
Edit: It was my fault, this rom has to be flashed on a kitkat rom, i was on a lollipop rom.
faceliler said:
Hello, i flashed the rom via TWRP with following the instructions, it has been like 40 minutes and it still not booted. Any idea?
Screen is like:
Fastboot mode started
reset
portcharge
reset
portcharge
STALL GET_DESCRIPTOR 128 6 1006 0 255
fastboot: processing commands
Edit: It was my fault, this rom has to be flashed on a kitkat rom, i was on a lollipop rom.
Click to expand...
Click to collapse
flash KK.bootloader for your phone model
Is google play service included in this ROM? Thank you.
jim380 said:
Is google play service included in this ROM? Thank you.
Click to expand...
Click to collapse
yes included
Pattern lock and Applock is not working
After one day, i can say that there is some bugs, but they are not that big, sometimes its freezing and sometimes its restarting whole system in random moments, also this is not that smooth like AOSP or miui v7 for lg g2, camera is working well, but in my opinion it's slow, movies on snap doesent work (recording, u can record but after this u will see static image). But, other things are good, i'll use it and wait for updates. Hope OTA is working (Sorry for my bad english, if u didnt understand me, i will try to explain it better just pm me)
Will this thread be updated/maintained?
Flashed the ROM and it looks great
But there are some problems.
Sound doesn't work and I can't call either.
Compass doesn't work. AppLock won't work. So as pattern lock.
Any solution for call and sound problem?
Pls help. I love this ROM
No sound is playing... Any patch for it
Southleader said:
Flashed the ROM and it looks great
But there are some problems.
Sound doesn't work and I can't call either.
Compass doesn't work. AppLock won't work. So as pattern lock.
Any solution for call and sound problem?
Pls help. I love this ROM
Click to expand...
Click to collapse
flash modem
aixabdennour said:
flash modem
Click to expand...
Click to collapse
Where can I find the modem?
Could you pls give me a link??
I'm on D805 variant
Southleader said:
Where can I find the modem?
Could you pls give me a link??
I'm on D805 variant
Click to expand...
Click to collapse
https://github.com/danielstuart14/hybrid_caf_bootstacks/tree/LG-CAF/d805-6
aixabdennour said:
what is your phone model!!
Click to expand...
Click to collapse
[deleted post]
jim380 said:
Will this thread be updated/maintained?
Click to expand...
Click to collapse
Yeah, I am here, trying my best to keep this thread updated all new informations. If you or anyone find an info to tell, then I will update it.
Does it really have OTA updates or not?
It really needs to be updated there are so many bugs which need to be fixed
Ai giúp minh vơi bật 3G nhưng sao lại chay tôc đô 2G. Cũng k chon được mang 2G
I followed all instructions here flash rom bootloader modem but when i finished didnt work every time reboot to recovery
Also i flashed kernel but fail
I do not know where is the problem
Aures Batna said:
I followed all instructions here flash rom bootloader modem but when i finished didnt work every time reboot to recovery
Also i flashed kernel but fail
I do not know where is the problem
Click to expand...
Click to collapse
Which variant you are using?
dksoni411 said:
Which variant you are using?
Click to expand...
Click to collapse
Ls980