Flashing Stock Rom for Samsung Grand Prime
When you are attempt to install rom kernel tweaks etc by instruction when something wrong happened to your phone is brick this is the only way to revert your phone to stock rom and fixing the brick phone which means you are going to in android kitkat 4.4.4 in your phone no modified. in this process if your phone brick neither xda nor me will not responsible for it do at your own risk. these guide is tested on grand prime
i have made this guide for noobs who want to flash their phone
Want to Understand firmware name go here credit @marcussmith2626
Required
1.Samsung USB Driver
2.Odin from here http://odindownload.com/ Please Download Odin 3.0.7 otherwise you will get error
3.Stcok Firmware (In the search box enter your model then select your region then download)
4.Please Maintain battery between 40+
5.PC or Laptop
6.USB
Instructions
Don't Skip any step
1.Download the USB Driver Install in our computer
2.Download the firmware from and extract you will see file tar.md5
3.Power off your grand prime
4.Boot into download mode by pushing volume down + home + power together
5.Press volume up
6.Connect the usb between mobile and computer
7.Extract Odin zip
8.Open Odin.exe
9.When You open you will see yellow color in BOX that means your phone is connected
10.Now Click on PDA and browse to the extract of the firmware and select where the file is firmware file located
11.When the process complete unplug your phone
12.when your phone reboot remove your battery
13.Now push Volume up + power + home together to go in recovery
14.Now navigate to wipe data reset by pressing volume up /down
15.Click on wipe data reset by pressing power
16.Again Navigate to reboot system now and click on it
27.Be patient first boot may take time
Credits
@marcussmith2626
samsung
xda
Reserved
awesome...:good::good:
grand prime
AndroidFire said:
Flashing Stock Rom for Samsung Grand Prime
When you are attempt to install rom kernel tweaks etc by instruction when something wrong happened to your phone is brick this is the only way to revert your phone to stock rom and fixing the brick phone which means you are going to in android kitkat 4.4.4 in your phone no modified. in this process if your phone brick neither xda nor me will not responsible for it do at your own risk. these guide is tested on grand prime
i have made this guide for noobs who want to flash their phone
Want to Understand firmware name go here credit @marcussmith2626
Required
1.Samsung USB Driver
2.Odin from here http://odindownload.com/
3.Stcok Firmware (In the search box enter your model then select your region then download)
4.Please Maintain battery between 40+
5.Pc or Laptop
6.USB
Instructions
Don't Skip any step
1.Download the USB Driver Install in our computer
2.Download the firmware from and extract you will see file tar.md5
3.Power off your grand prime
4.Boot into download mode by pushing volume down + home + power together
5.Press volume up
6.Connect the usb between mobile and computer
7.Extract Odin zip
8.Open Odin.exe
9.When You open you will see yellow color in BOX that means your phone is connected
10.Now Click on PDA and browse to the extract of the firmware and select where pda in file
11.Now Click on CSC and browse to the extract of the firmware and select where csc in file
12.Now click on PHONE and browse to the extract of the firmware and select where modem in file
13.After that click on start button
14.When the process complete unplug your phone
15.when your phone reboot remove your battery
16.Now push Volume up + power + home together to go in recovery
17.Now navigate to wipe data reset by pressing volume up /down
18.Click on wipe data reset by pressing power
19.Again Navigate to reboot system now and click on it
20.Be patient first boot may take time
Credits
@marcussmith2626
samsung
xda
Click to expand...
Click to collapse
where can i get these 3 files?
10.Now Click on PDA and browse to the extract of the firmware and select where pda in file
11.Now Click on CSC and browse to the extract of the firmware and select where csc in file
12.Now click on PHONE and browse to the extract of the firmware and select where modem in file
in the firmware only 1 file is downloaded....
xufy3n said:
where can i get these 3 files?
10.Now Click on PDA and browse to the extract of the firmware and select where pda in file
11.Now Click on CSC and browse to the extract of the firmware and select where csc in file
12.Now click on PHONE and browse to the extract of the firmware and select where modem in file
in the firmware only 1 file is downloaded....
Click to expand...
Click to collapse
Screenshot pls
Same issue, cant install firmware
i m from Pakistan, i have downloaded 2 firmwares from this link http://www.sammobile.com/firmwares/database/SM-G530H/PAK/ , January and February, both zip files has only 1 file in them.
screenshot, as u can see there is only 1 file in both firmwares
---------- Post added at 11:01 AM ---------- Previous post was at 10:58 AM ----------
AndroidFire said:
Screenshot pls
Click to expand...
Click to collapse
screenshot, as u can see there is only 1 file in both firmwares
Same problm plz help
For those who get Only one file in extracted file you need to select the file as pda
One file…… faild plez help
AndroidFire said:
For those who get Only one file in extracted file you need to select the file as pda
Click to expand...
Click to collapse
already did that with both firmwares, using odin 3.07 and 3.09, both failed n same error
Yeah me too.. when i put file on pda and start will get error fail get auth.
what should i do sir..please help!!
Same goes for me. it failed as well
This is how i did.....
I hvae 3.0.7 and 3.10.6 Odin3.
Downloaded the driver... installed it....
I just put the stock rom file in PDA and booted my phone to download mod.. . .. . . . .
Waited it to show the word added in the white box section in the tool...dn pressed start....
After its finished let it reboot nd dnt take the cable out.... (just like that)
(If u want.... go to the recovery and format it and done) or else its already done.
No probs . :fingers-crossed::good:
Hi Guys,
When I bought my Grand Prime I installed the ROM G530HVJU1ANI8 and it works so I installed the new version G530HZTM1ANJ2 and it works too.
Now there are two new versions for my region that show up a message error like that : Odin just errors: Failed [Auth].
I used the Odin 3.07 and 3.09 versions
I'm using the Odin with only one file in extracted file choosing the file as pda
2014-09-01 Brazil (TIM) 4.4.4 G530HVJU1ANI8 G530HZTM1ANI8 - OK
2014-11-01 Brazil (TIM) 4.4.4 G530HVJU1ANJ2 G530HZTM1ANJ2 - OK
2015-02-01 Brazil (TIM) 4.4.4 G530HVCU1ANL4 G530HZTM1ANL4 - failed
2015-03-01 Brazil (TIM) 4.4.4 G530HVCU1AOB1 G530HZTM1AOB1 - failed
Someone from BR updated the recently ROM sucessfully or someone can help me to update ?
The mobile is not rooted.
Thanks
pjunior1976 said:
Hi Guys,
When I bought my Grand Prime I installed the ROM G530HVJU1ANI8 and it works so I installed the new version G530HZTM1ANJ2 and it works too.
Now there are two new versions for my region that show up a message error like that : Odin just errors: Failed [Auth].
I used the Odin 3.07 and 3.09 versions
I'm using the Odin with only one file in extracted file choosing the file as pda
2014-09-01 Brazil (TIM) 4.4.4 G530HVJU1ANI8 G530HZTM1ANI8 - OK
2014-11-01 Brazil (TIM) 4.4.4 G530HVJU1ANJ2 G530HZTM1ANJ2 - OK
2015-02-01 Brazil (TIM) 4.4.4 G530HVCU1ANL4 G530HZTM1ANL4 - failed
2015-03-01 Brazil (TIM) 4.4.4 G530HVCU1AOB1 G530HZTM1AOB1 - failed
Someone from BR updated the recently ROM sucessfully or someone can help me to update ?
The mobile is not rooted.
Thanks
Click to expand...
Click to collapse
Hay I'm from Bangladesh. My cse is xef south Africa. Failed to update new firmware of south Africans n Brazilian ( tim). these r curapted n failed. So I successfully update new Kazakhstan firmware by Odin 3.10. 6 n its ok. Link: http://forum.xda-developers.com/showthread.php?t=2711451, Oh my bd mobile network is free n SIM is unlock also.
Edit: Rooted my phone by "cf auto root by mohon" n works well.
Happy flashing
cdaarif said:
Hay I'm from Bangladesh. My cse is xef south Africa. Failed to update new firmware of south Africans n Brazilian ( tim). these r curapted n failed. So I successfully update new Kazakhstan firmware by Odin 3.10. 6 n its ok. Oh my bd mobile network is free n SIM is unlock also.
Edit: Rooted my phone by "cf auto root by mohon" n works well
Click to expand...
Click to collapse
Happy flashing
philippines
will this be possible to the philippine grand prime variant?
thanks alot!
iandarylmartin said:
will this be possible to the philippine grand prime variant?
thanks alot!
Click to expand...
Click to collapse
Try ur self n report here. If u free from ur carrier/network n SIM, I think then u succeed.
FAIL (AUTH)
For ppl who try flashing your device with new released firmware and got a message say "FAIL (AUTH)" in your odin,.. it is means you downloaded the wrong firmware region and that firmware is not compatible with your device..
You can try download another firmware region and re-try flash you device,..
My device is SM-G530H made in vietnam, i bough this phone on my country indonesian,..
The firmware worked for my device is kazakhstan region (i flashed it on early Feb and worked well) and also indonesian region (i flashed it on early March and worked well also)
Hope this helps
Related
Hi
sorry for my bad english
a few days ago i did an update via odin.i mean i want to change firmware to another stock rom to test battery life and something else but my mistake is that i used PIT file.that erase every thing and after that S3 freeze at boot logo ,very lagy and restart by itself.
i searched internet and unfourtunately i found my s3 bricked
but now its ok and the solution is ever u used PIT(partition information table)u must flash files that ur s3 need.
=================================================
1-u must use correct version of samsung galaxy s3(i9300) = Odin3 v3.04
2-go to download mode by presing volume down + menu + power and then select wolume up
3-flash pit file with odin .phone will restart and then enter download mode by step 2 again then go to step 4 (this isnt necessary more)
4-if u want flash desired stock rom do this by PDA button
5-if u do step 4 then restart or not flash PARAM.bin by PHONE button via odin
thats the point , param.bin is the solution for s3
its worked for my dead galaxy s3 gt-i9300 and i thought that bricked
=======================
extract files and uses them
i extracted param.bin from a stock korean firmware
hope it will help who search for solution :victory:
Good but Really works ??
hi
i think this can help if use PIT file.i test without using PIT file and no problem happens.
if phone is slow and laggy and restart with no reason i think its good to test this solution.however this file available in boot loader and main firmware file but flash it instead of those can help
when u flash .pit or .param do you need to enable Re-partition on Odin?
murphy0 said:
when u flash .pit or .param do you need to enable Re-partition on Odin?
Click to expand...
Click to collapse
Should be pit yes param no. Though param is the 4th partition on the mmc.
Not working 4 me.....
Flashed pit, reboot to DL-Mode, Flashed ROM -> Blue Bootanimation Loop
z0mg.jer1Cho said:
Not working 4 me.....
Flashed pit, reboot to DL-Mode, Flashed ROM -> Blue Bootanimation Loop
Click to expand...
Click to collapse
try over recovery mode and wipe data and cache
mostafaz said:
try over recovery mode and wipe data and cache
Click to expand...
Click to collapse
haven't counted, but tried this a lot of times :/
Never the Less, sent my Phone to Service Center (with Flashcounter 14, thank god im living in Germany )
mostafaz said:
Hi
sorry for my bad english
a few days ago i did an update via odin.i mean i want to change firmware to another stock rom to test battery life and something else but my mistake is that i used PIT file.that erase every thing and after that S3 freeze at boot logo ,very lagy and restart by itself.
i searched internet and unfourtunately i found my s3 bricked
but now its ok and the solution is ever u used PIT(partition information table)u must flash files that ur s3 need.
=================================================
1-u must use correct version of samsung galaxy s3(i9300) = Odin3 v3.04
2-go to download mode by presing volume down + menu + power and then select wolume up
3-flash pit file with odin .phone will restart and then enter download mode by step 2 again then go to step 4 (this isnt necessary more)
4-if u want flash desired stock rom do this by PDA button
5-if u do step 4 then restart or not flash PARAM.bin by PHONE button via odin
thats the point , param.bin is the solution for s3
its worked for my dead galaxy s3 gt-i9300 and i thought that bricked
=======================
extract files and uses them
i extracted param.bin from a stock korean firmware
hope it will help who search for solution :victory:
Click to expand...
Click to collapse
is that for galaxy s3 i9300 16 gb internacional europe ?
---------- Post added at 01:04 AM ---------- Previous post was at 01:01 AM ----------
mostafaz said:
Hi
sorry for my bad english
a few days ago i did an update via odin.i mean i want to change firmware to another stock rom to test battery life and something else but my mistake is that i used PIT file.that erase every thing and after that S3 freeze at boot logo ,very lagy and restart by itself.
i searched internet and unfourtunately i found my s3 bricked
but now its ok and the solution is ever u used PIT(partition information table)u must flash files that ur s3 need.
=================================================
1-u must use correct version of samsung galaxy s3(i9300) = Odin3 v3.04
2-go to download mode by presing volume down + menu + power and then select wolume up
3-flash pit file with odin .phone will restart and then enter download mode by step 2 again then go to step 4 (this isnt necessary more)
4-if u want flash desired stock rom do this by PDA button
5-if u do step 4 then restart or not flash PARAM.bin by PHONE button via odin
thats the point , param.bin is the solution for s3
its worked for my dead galaxy s3 gt-i9300 and i thought that bricked
=======================
extract files and uses them
i extracted param.bin from a stock korean firmware
hope it will help who search for solution :victory:
Click to expand...
Click to collapse
is that for galaxy s3 i9300 16 gb internacional europe ?
hi
yes gt-i9300
international
PIT file
mostafaz said:
hi
yes gt-i9300
international
Click to expand...
Click to collapse
hello,I had initially no WIFI, then a few days later brick.
Hopefully boot always correct and I could flash some original ROM.
But doing so the IMEI and other where lost (while files are written in the EFS partition-directory
My 9300 INT (Europe-France) works but limited to Wifi. 4.1.2 version with EMG4 (recent 2013 july) the 9300 date sept 2012
The EFS was probably overriden
I flashed different ROMS and could not have it back, but I did not try to use PIT rebuilding.
I am actually with an EMG4 modem - so I just wonder
Is the param.bin a descriptive file fro PIT ?
If not what kind of PIT file may I use ? is it included in a part of the ROM files ?
If I put the complete rom file in the PIT window of ODIN, will ODIN use only PIT? or will it FLASH the complete ROM + PIT.
SOrry to be new to this, I can understand shell, ADB, busybox, root etc, but the way the flashing is mounting files and partitioopns escapes me.
Thank you in advance if someone can give me a hand.
Regards
PS I had seen almost 100 pages of different methods and no real TUTO when no backup is find (I may have one at some point but on another SD...
So I know no miracle exist, out of specific equipment. , box, ...
Sorry for the 10001 quetion about the same troublewith IEMI/EFS
Help
there is no PIT partition here
i can't understand if i need to flash param or not. if its not needed then why download it ?
i can't connect to wifi and can't use dialer, does above method solve my problem ?
Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
This is tested on galaxy s3 international i have flashed with latest 4.3 I9300XXUGMJ9 maybe work on 4.1.2 but not tested if someone test it let me know !!
Step by step guide please be patient and follow it steps
1. Download firmware from sammobile http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=0#firmware
2. Download ODIN from attachments below
3. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key. Now you will see download mode and you will be asked if you want to cancel or continue. Press volume up to continue or volume down to cancel and reboot.
4. After this click PDA and select firmware you download .tar.md5 and Start flash and wait till PASS if your phone autoreboot stuck after flash you must factory reset wipe data cache.
5. Root install CWM or PHILZ recovery with odin .tar file http://forum.xda-developers.com/showthread.php?t=2002953 or http://forum.xda-developers.com/showthread.php?t=1719744
6.Install 7zip on your pcc http://www.7-zip.org/download.html
7.Right click on firmware Open with or open with 7zip same firmware you flashed above .!! when dialog box opened click Select a program from a list of installed programs then click browse and go C:\Program Files (x86)\7-Zip 7zFM click you will get error There is no correct record at the end of archive dont panic click ok click on modem.bin and move to same folder with your firmware I9300xxxxxxx.tar.md5 ..! cuz u will get error patchin if you move it another folder.
8.Download modem patcher from zuluman in attachment below click patch and select modem.bin patcher will make backup use modem.bin not .bak
9. Download METAINF rar extract it copy and paste your patched modem.bin inside this folder select all 3 files right click and add to archive select archive format .ZIP not RAR after this copy the zip file you created and paste to root of your sdcard reboot into recovery PRESS AND HOLD VOLUME UP + Home Button + Power select zip flash and reboot device. now your phone should work network..
10. Remember the same firmware you flashed same modem you will need dont flash other modem
11. Comment and thanks if this worked for you .
If you have question i will help u as i can asap
bleros said:
Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
This is tested on galaxy s3 international i have flashed with latest 4.3 I9300XXUGMJ9 maybe work on 4.1.2 but not tested if someone test it let me know !!
Step by step guide please be patient and follow it steps
1. Download firmware from sammobile http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=0#firmware
2. Download ODIN from attachments below
3. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key. Now you will see download mode and you will be asked if you want to cancel or continue. Press volume up to continue or volume down to cancel and reboot.
4. After this click PDA and select firmware you download .tar.md5 and Start flash and wait till PASS if your phone autoreboot stuck after flash you must factory reset wipe data cache.
5. Root install CWM or PHILZ recovery with odin .tar file http://forum.xda-developers.com/showthread.php?t=2002953 or http://forum.xda-developers.com/showthread.php?t=1719744
6.Install 7zip on your pcc http://www.7-zip.org/download.html
7.Right click on firmware Open with or open with 7zip same firmware you flashed above .!! when dialog box opened click Select a program from a list of installed programs then click browse and go C:\Program Files (x86)\7-Zip 7zFM click you will get error There is no correct record at the end of archive dont panic click ok click on modem.bin and move to same folder with your firmware I9300xxxxxxx.tar.md5 ..! cuz u will get error patchin if you move it another folder.
8.Download modem patcher from zuluman in attachment below click patch and select modem.bin patcher will make backup use modem.bin not .bak
9. Download METAINF rar extract it copy and paste your patched modem.bin inside this folder select all 3 files right click and add to archive select archive format .ZIP not RAR after this copy the zip file you created and paste to root of your sdcard reboot into recovery PRESS AND HOLD VOLUME UP + Home Button + Power select zip flash and reboot device. now your phone should work network..
10. Remember the same firmware you flashed same modem you will need dont flash other modem
11. Comment and thanks if this worked for you .
If you have question i will help u as i can asap
Click to expand...
Click to collapse
worked for me, thanks
no luck
bleros said:
Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
This is tested on galaxy s3 international i have flashed with latest 4.3 I9300XXUGMJ9 maybe work on 4.1.2 but not tested if someone test it let me know !!
Step by step guide please be patient and follow it steps
1. Download firmware from sammobile http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=0#firmware
2. Download ODIN from attachments below
3. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key. Now you will see download mode and you will be asked if you want to cancel or continue. Press volume up to continue or volume down to cancel and reboot.
4. After this click PDA and select firmware you download .tar.md5 and Start flash and wait till PASS if your phone autoreboot stuck after flash you must factory reset wipe data cache.
5. Root install CWM or PHILZ recovery with odin .tar file http://forum.xda-developers.com/showthread.php?t=2002953 or http://forum.xda-developers.com/showthread.php?t=1719744
6.Install 7zip on your pcc http://www.7-zip.org/download.html
7.Right click on firmware Open with or open with 7zip same firmware you flashed above .!! when dialog box opened click Select a program from a list of installed programs then click browse and go C:\Program Files (x86)\7-Zip 7zFM click you will get error There is no correct record at the end of archive dont panic click ok click on modem.bin and move to same folder with your firmware I9300xxxxxxx.tar.md5 ..! cuz u will get error patchin if you move it another folder.
8.Download modem patcher from zuluman in attachment below click patch and select modem.bin patcher will make backup use modem.bin not .bak
9. Download METAINF rar extract it copy and paste your patched modem.bin inside this folder select all 3 files right click and add to archive select archive format .ZIP not RAR after this copy the zip file you created and paste to root of your sdcard reboot into recovery PRESS AND HOLD VOLUME UP + Home Button + Power select zip flash and reboot device. now your phone should work network..
10. Remember the same firmware you flashed same modem you will need dont flash other modem
11. Comment and thanks if this worked for you .
If you have question i will help u as i can asap
Click to expand...
Click to collapse
Did it and lost my IMEI and other info, reflash the stock rom and get them back but no network yet =(
Got a Little confused at point 8 and 9,..
8.- Select modem.bin is the same archive that previously extracted with 7zip... but zulaman modify it? or there was suposed to apear a new file beside de one with .bak that am supose to leave there?
9.- 3 files... you mean 2 files and a directory?
I did it that way :/
bleros said:
Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
This is tested on galaxy s3 international i have flashed with latest 4.3 I9300XXUGMJ9 maybe work on 4.1.2 but not tested if someone test it let me know !!
Step by step guide please be patient and follow it steps
1. Download firmware from sammobile http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=0#firmware
2. Download ODIN from attachments below
3. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key. Now you will see download mode and you will be asked if you want to cancel or continue. Press volume up to continue or volume down to cancel and reboot.
4. After this click PDA and select firmware you download .tar.md5 and Start flash and wait till PASS if your phone autoreboot stuck after flash you must factory reset wipe data cache.
5. Root install CWM or PHILZ recovery with odin .tar file http://forum.xda-developers.com/showthread.php?t=2002953 or http://forum.xda-developers.com/showthread.php?t=1719744
6.Install 7zip on your pcc http://www.7-zip.org/download.html
7.Right click on firmware Open with or open with 7zip same firmware you flashed above .!! when dialog box opened click Select a program from a list of installed programs then click browse and go C:\Program Files (x86)\7-Zip 7zFM click you will get error There is no correct record at the end of archive dont panic click ok click on modem.bin and move to same folder with your firmware I9300xxxxxxx.tar.md5 ..! cuz u will get error patchin if you move it another folder.
8.Download modem patcher from zuluman in attachment below click patch and select modem.bin patcher will make backup use modem.bin not .bak
9. Download METAINF rar extract it copy and paste your patched modem.bin inside this folder select all 3 files right click and add to archive select archive format .ZIP not RAR after this copy the zip file you created and paste to root of your sdcard reboot into recovery PRESS AND HOLD VOLUME UP + Home Button + Power select zip flash and reboot device. now your phone should work network..
10. Remember the same firmware you flashed same modem you will need dont flash other modem
11. Comment and thanks if this worked for you .
If you have question i will help u as i can asap
Click to expand...
Click to collapse
i have a problem with my GS3 i9300 ... when i update to 4.3 my imei reads like that 00041xxxxx0000 ... is that will work with me ??? or what should i do
K.mngawy said:
i have a problem with my GS3 i9300 ... when i update to 4.3 my imei reads like that 00041xxxxx0000 ... is that will work with me ??? or what should i do
Click to expand...
Click to collapse
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221
JJEgan said:
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221
Click to expand...
Click to collapse
believe meeee nothing of those works with meeeeee the same problem .. when i restore my imei on 4.3 i get unknown basebend and unknown imei !!! ... i had to downgrade to 4.1.2 to get my imei back !!
bleros said:
Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
This is tested on galaxy s3 international i have flashed with latest 4.3 I9300XXUGMJ9 maybe work on 4.1.2 but not tested if someone test it let me know !!
Step by step guide please be patient and follow it steps
1. Download firmware from sammobile http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=0#firmware
2. Download ODIN from attachments below
3. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key. Now you will see download mode and you will be asked if you want to cancel or continue. Press volume up to continue or volume down to cancel and reboot.
4. After this click PDA and select firmware you download .tar.md5 and Start flash and wait till PASS if your phone autoreboot stuck after flash you must factory reset wipe data cache.
5. Root install CWM or PHILZ recovery with odin .tar file http://forum.xda-developers.com/showthread.php?t=2002953 or http://forum.xda-developers.com/showthread.php?t=1719744
6.Install 7zip on your pcc http://www.7-zip.org/download.html
7.Right click on firmware Open with or open with 7zip same firmware you flashed above .!! when dialog box opened click Select a program from a list of installed programs then click browse and go C:\Program Files (x86)\7-Zip 7zFM click you will get error There is no correct record at the end of archive dont panic click ok click on modem.bin and move to same folder with your firmware I9300xxxxxxx.tar.md5 ..! cuz u will get error patchin if you move it another folder.
8.Download modem patcher from zuluman in attachment below click patch and select modem.bin patcher will make backup use modem.bin not .bak
9. Download METAINF rar extract it copy and paste your patched modem.bin inside this folder select all 3 files right click and add to archive select archive format .ZIP not RAR after this copy the zip file you created and paste to root of your sdcard reboot into recovery PRESS AND HOLD VOLUME UP + Home Button + Power select zip flash and reboot device. now your phone should work network..
10. Remember the same firmware you flashed same modem you will need dont flash other modem
11. Comment and thanks if this worked for you .
If you have question i will help u as i can asap
Click to expand...
Click to collapse
Hi, thank you for this. But I am having a problem...
I am unable to create a flashable METAINF.zip using 7zip. I tried to flash it using CWM and Philz with installation aborted message both times. That was with 4.3 firmware. So I then tried to repeat the process with the 4.1.2 firmware with the same results. Am I missing something on making the zip flashable?
Thanks,
Kes
Edit
Scrap that. My zip is now flashable. Was compressing the entire folder, not just the three files within it. 4.3 didn't work though. Off to have a go at 4.1.2 instead.....
---------- Post added at 09:27 AM ---------- Previous post was at 08:55 AM ----------
Nope, still no network. But instead of saying emergency calls only, it says no service. Manually searching for a network shows a pop up saying no sim
It is proper forum etiquette to only quote a prior post when necessary and then only the pertinent portion of the post. Above is a good example of a 10-page thread from only 1-2 pages of content. Please do your fellow forum members a favor and try to adopt this approach.
Thank you Scott586 for pointing out my drastic error which I can only profoundly apologise for. But may I, ever so gently, point out that I am a very new member and am not yet familiar with the buttons. The forums I usually frequent have a "quote" button which quotes the post you wish to reply to. This forum simply states "reply", a button I am accustomed to using when replying/responding/posting on a thread.
A forum etiquette that I am familiar with though is not to give newbies a hard time while they learn the new layout. Maybe that is one which could also be implemented here?
Oh, and back on topic, 4.1.2 didn't work either. Back to the drawing board for me
for my phone, that's not work. I'm on 4.1.2 (XEF-I9300XXEMG4) and when i follow your process, network is over, WiFi too! IMEI/Baseband are blank.
Maybe i make a mistake but i don't think. Thank you.
bleros said:
Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
Click to expand...
Click to collapse
Yesterday I've spent like 10 hours reading through posts and trying different solutions to fix "not registered to network" issue after upgrading my i9300 to android 4.3 in the end, I've found this post and it worked like a charm.
Excellent step by step explanation, all the vital information and links to the tools needed to complete the procedure,.
I can only say, thanks a lot man. :good:
my dear frient
thank you for sharing the valuable idea
unfortunately i cant follow u from step 5 please
Root install CWM or PHILZ recovery with odin .tar file ....? please attach with video instruction if possible waiting for u r reply as soon as possible
This method sounds quite promising but looks like it's for stock ROM only...I've lost my network, but I have a custom rom installed (Archidroid 1.7.12). Network was working on stock 4.1.2 with ariza patch. Any experience with that or have any idea how your method would be applied to my situation? Thanks!
PBLnS said:
Did it and lost my IMEI and other info, reflash the stock rom and get them back but no network yet =(
Got a Little confused at point 8 and 9,..
8.- Select modem.bin is the same archive that previously extracted with 7zip... but zulaman modify it? or there was suposed to apear a new file beside de one with .bak that am supose to leave there?
9.- 3 files... you mean 2 files and a directory?
I did it that way :/
Click to expand...
Click to collapse
I am having problems with copying files to the metainf directory as well. if any one can specify where exactly to copy the modem.bin? Its quite unclear and I am unable to flash the zip archive, ends up with an error. Please help!!
need fix for this in s5 g900f
i need fix for my s5.
my imei is the same with what is printed in the back of my fone.
wifi is working.
itried flashing the original firmware, nothing was fix. done recovery mode. factory reset wipe cache. itried inserting the simcard to other fone it has signaL and can make caLLs. tried tried inserting other simcard it works in my s5. i dont know what is wrong why it cant register on the network my simcard on my s5. please i need fix asap. i think the efs or something.
i want to know how to flash the modem in s5 and where to downLoad the modem. maybe this wiLL fix the probLem.
I have lastest version of stock rom for i8552.
All new firmware users have some root problems. And I have never root my device so My device is not rooted ,(original firmware)
I want to install old version of stock rom .Can you help me . How to install old version for this device ?
Have you any idea ?
I want to install that version , PDA: I8552XXAMK2
current verison on device is I8552XXANF2.
And I never root my device. Please help me
Visit the following thread for rooting with CWM.
http://forum.xda-developers.com/showthread.php?t=2494471
For flashing back to previous stock rom download the stock rom from sammobile or samsung-updates.com and flash it with Odin.
Sent from my GT-I8552 using Tapatalk
devesh9 said:
Visit the following thread for rooting with CWM.
http://forum.xda-developers.com/showthread.php?t=2494471
For flashing back to previous stock rom download the stock rom from sammobile or samsung-updates.com and flash it with Odin.
Sent from my GT-I8552 using Tapatalk
Click to expand...
Click to collapse
I know this topic . But Samsung has new security on new Stock Firmware updates. All users have new updates said that .
Please explain it ,
I have downloaded old stock rom on sammobiles. But How to flash it ?
as a normal flashing ? without root ?
Sorry I am a beginnger user for this.
Dear friend,
Install USB Drivers or install Samsung Kies . kies will install the necessary drivers automatically.
1. First be sure USB Debugging is checked in ur device ( Settings/Developer Options/USB Debugging )
2. Extract the Odin file from the zip.
3. Open Odin3 (Run As Administrator).
4. Put your device in download mode. To do so, press Volume Down And Home And Power Button all together and when it vibrates release Power Button but keep others pressed. You should have a triangle with an android janitor while it's saying downloading ..VOL UP TO CONTINUE...
5. Now connect USB to PC ,you should see a blue rectangle with COM:xx and saying Added. It means that your device is ready to be flashed!
6. Go into the PDA section and select your .tar file.( stock ROM file)
7. Dont check any other option (F.reset time and Auto reboot are checked by default).
8. Now click Start.
9. When it's finished, it should say that "Res OK" or "PASS"in Odin.
10. Now the phone will restart and you will have the stock firmware as per your requirements.
You don't need root to flash ROM thru Odin.
If you want to root search for framaroot.apk in XDA .
Sent from my GT-I8552 using Tapatalk
NOTE: I NO LONGER SUPPORT THIS DEVICE, SO I MAYBE LIMITED ON THE NUMBER OF QUESTIONS I CAN ANSWER THAT ARE RELATED TO THE DEVICE!
EDIT: NOW REQUESTING TESTERS FOR THE BOC7 & BOC8 FIRMWARES (FILES NOT YET OBTAINED, SO I DO NOT RECOMMEND APPLYING ATM). NOT RECOMMENDED IF YOU USE YOUR ALPHA AS A DAILY DRIVER! BEFORE "APPLYING", YOU MUST...
-Understand and be okay with the high-ish possibility of having your device brick during/after flash.
-Understand that if something does go wrong, you cannot put the blame on me. Follow all safety instructions for flashing and it should work fine.
PM ME IF INTERESTED!
Here you can download the official KitKat and Lollipop firmware for the SM-G850A.
As of right now, the SM-G850A can no longer be rooted.
Download Links:
KitKat 4 File Firmware Download (G850AUCU1ANH8): https://mega.nz/#!q4YBEYya!vvBRgCaq7EAhtQoaauuGiOL4h9ZWC11KtiMIzX29gns
KitKat Combo Firmware Download (G850AUCU1ANH8): https://mega.nz/#!6kgGSDpa!JhjNMpsKwQqPqv5EAyqsWteKcSthVe8WBqNcxB2afJE
Lollipop 4 File Firmware Download (G850AUCU1BOC6): https://mega.nz/#!6swkzbhb!eNhUkZqvVcNthluHQe4Gkmpa4dkAdvEyYaZ-u3OSyrc
Lollipop Combo Firmware Download (G850AUCU1BOC6): https://mega.nz/#!fgZ0iTxJ!Pwh6Laa1EyLAFgYuqfwUzR9BfpgwCnMgRWTD1x1JZW4
Odin v3.12 Download: https://mega.nz/#!KsZiHKTb!aEHdQgO7JAQeUwdJWqS0xoR3lyJH4ieJ6qTbVKce8Zk
If the links go down or won't work for some reason, please let me know.
Developers Tip: If you want to flash firmware without wiping your data, make sure there is no pit file selected under the PIT tab in Odin, then extract and remove cache.img.ext4 then repack as a .tar file. Applies to both combo and 4 file firmware packages. In 4 file packages, cache.img.ext4 is in the CSC file. However, in some cases this may put your device in a bootloop.
Cheers!
Sorry but... what is the diference between "4 file" and "combo"?
ifgiovanni said:
Sorry but... what is the diference between "4 file" and "combo"?
Click to expand...
Click to collapse
The simplest way to explain 4 file is in Odin, there are 4 firmware slots. The "4 File .rar package" has the correct file for each slot in Odin to flash. Example, extract the .rar package you (might have) downloaded, and you will see 4 .tar files and the pit file. So the BL_xxx_xxxxxxxx_xxxxxxxx_xxxxxx_HOME.tar file would go in the BL slot in Odin.
Combo is basically all of those files that would be in the 4 .tar archives put into one. If you choose to download this file, the .tar package must be flashed though the AP slot in Odin.
And the .PIT file would go under the PIT tab in Odin.
If you don't want to lose your data while flashing, you can do this:
-Don't use the pit file in Odin
--or--
-If you chose to download the 4 file firmware, don't flash the CSC file and don't use the pit file.
--or--
-if you chose to download the combo firmware, you can use 7zip (I recommend downloading it onto your pc if you don't have it already) to extract the archive and delete cache.img.ext4, then repack the remaining files (Except the pit file) into a new .tar archive.
Cheers!
KingOfTheNet said:
The simplest way to explain 4 file is in Odin, there are 4 firmware slots. The "4 File .rar package" has the correct file for each slot in Odin to flash. Example, extract the .rar package you (might have) downloaded, and you will see 4 .tar files and the pit file. So the BL_xxx_xxxxxxxx_xxxxxxxx_xxxxxx_HOME.tar file would go in the BL slot in Odin.
Combo is basically all of those files that would be in the 4 .tar archives put into one. If you choose to download this file, the .tar package must be flashed though the AP slot in Odin.
And the .PIT file would go under the PIT tab in Odin.
If you don't want to lose your data while flashing, you can do this:
-Don't use the pit file in Odin
--or--
-If you chose to download the 4 file firmware, don't flash the CSC file and don't use the pit file.
--or--
-if you chose to download the combo firmware, you can use 7zip (I recommend downloading it onto your pc if you don't have it already) to extract the archive and delete cache.img.ext4, then repack the remaining files (Except the pit file) into a new .tar archive.
Cheers!
Click to expand...
Click to collapse
have a problem. The process dont continue of step "apnhlos". Can you help me?
How to flash Lollipop rom on alpha. I Don't know how to flash 4 files via Odin. I have G850A Unlocked from AT&T model.
What Are the Steps for Data wipe and all that kind of Stuff Please Explain me all the steps to flash the rom on my Alpha.
Whatsapp me on +919665958993
ilive.co.in said:
How to flash Lollipop rom on alpha. I Don't know how to flash 4 files via Odin. I have G850A Unlocked from AT&T model.
What Are the Steps for Data wipe and all that kind of Stuff Please Explain me all the steps to flash the rom on my Alpha.
Whatsapp me on +919665958993
Click to expand...
Click to collapse
Open Odin and look to the right of the window, you will see 4 buttons, named "BL" "AP" "CP" and "CSC"
Extract the respective 4 file firmware from the downloaded .rar package to your desktop or downloads folder and open the folder once completed.
From there, you can insert the 4 .tar files into Odin. Once in Odin, click on the BL slot and navigate to the folder that contains the extracted files. Once there, select the tar file with the letters BL at the very beginning, and vice versa.
Example: BL_G850AUCU1BOC6_G850AATT1BOC6_LRX22G_HOME.tar (which is the bootloader files for lollipop firmware) would go under the BL slot in Odin.
Screenshot: https://mega.nz/#!2pZlGboI!M5YA2RGn0ufZ_bdVIFg6AD3xIH3iHg00JrAgHoo0OP8
If you downloaded the combo (all in one) firmware package, extract everything in the .rar file and place the .tar package under the AP slot in Odin, and if you want to perform a clean reset, make sure the .PIT file is under the PIT tab then PIT slot in Odin and make sure that "NAND Erase All" and "Re-Partition" is checked under the 'Options' tab.
ifgiovanni said:
have a problem. The process dont continue of step "apnhlos". Can you help me?
Click to expand...
Click to collapse
Did you download the 4 file or combo package?
ilive.co.in said:
How to flash Lollipop rom on alpha. I Don't know how to flash 4 files via Odin. I have G850A Unlocked from AT&T model.
What Are the Steps for Data wipe and all that kind of Stuff Please Explain me all the steps to flash the rom on my Alpha.
Whatsapp me on +919665958993
Click to expand...
Click to collapse
Also are you wanting to wipe your data or no?
ifgiovanni said:
have a problem. The process dont continue of step "apnhlos". Can you help me?
Click to expand...
Click to collapse
I've tested all 4 of the firmware packages and each of them flashed no problem. What firmware version are you on right now? You can check that by going into Settings --> Device --> About Device.
KingOfTheNet said:
I've tested all 4 of the firmware packages and each of them flashed no problem. What firmware version are you on right now? You can check that by going into Settings --> Device --> About Device.
Click to expand...
Click to collapse
I tried with combo and with 4 files.
I have 5.0.2.
ifgiovanni said:
I tried with combo and with 4 files.
I have 5.0.2.
Click to expand...
Click to collapse
The device hasn't received any ota updates so the flash should work. Did you download the version of Odin I posted on this thread? And did you try the lollipop or the kitkat firmware?
KingOfTheNet said:
The device hasn't received any ota updates so the flash should work. Did you download the version of Odin I posted on this thread? And did you try the lollipop or the kitkat firmware?
Click to expand...
Click to collapse
Yes i tried with the version that you posted.
Is necesary to wipe data?
ifgiovanni said:
Yes i tried with the version that you posted.
Is necesary to wipe data?
Click to expand...
Click to collapse
Wiping data will be pointless if Odin can't flash the firmware completely. Did you test the lollipop firmware or the kitkat firmware?
KingOfTheNet said:
Wiping data will be pointless if Odin can't flash the firmware completely. Did you test the lollipop firmware or the kitkat firmware?
Click to expand...
Click to collapse
First time with kitkat I left it all night and it didnt end.
I have disconnected the phone in the morning and not started, then I installed the bootloader (of lolipop) alone and it is doing well.
ifgiovanni said:
First time with kitkat I left it all night and it didnt end.
I have disconnected the phone in the morning and not started, then I installed the bootloader (of lolipop) alone and it is doing well.
Click to expand...
Click to collapse
Try booting your phone into download mode then reflash the Lollipop bootloader in Odin (BL File goes under the BL slot for 4 file). If you are not wanting to wipe your data, and if you downloaded the 4 file firmware, you can simply reflash the lollipop bootloader files then afterwards go back into download mode then reflash the AP and CP file. The actual bootloader in the phone does allow the flashing of different firmware versions for the device so it sounds like a small bootloader issue.
ifgiovanni said:
First time with kitkat I left it all night and it didnt end.
I have disconnected the phone in the morning and not started, then I installed the bootloader (of lolipop) alone and it is doing well.
Click to expand...
Click to collapse
You also said that Odin was stuck on something during flash. Do you know what file was it stuck on (What file it said at the top left-hand corner of the Odin window)?
ifgiovanni said:
First time with kitkat I left it all night and it didnt end.
I have disconnected the phone in the morning and not started, then I installed the bootloader (of lolipop) alone and it is doing well.
Click to expand...
Click to collapse
Try a different usb port on your computer, and if the same thing happens, try a different usb cable or switch the ports again.
No roots available still for g850a?There are other sites showing a root method
Is it possible to root if the g850a is flashed back to kit kat? has any one tried to flash the TWRP recovery available on their website for the slte? is that only for the exynos version? and possible try rooting throgh there?
kevace1 said:
Is it possible to root if the g850a is flashed back to kit kat? has any one tried to flash the TWRP recovery available on their website for the slte? is that only for the exynos version? and possible try rooting throgh there?
Click to expand...
Click to collapse
The G850A Has a locked bootloader, therefore, cannot run TWRP or any custom kernel or recovery.
Cheers!
Guys, i tried to used TWRP but unable to find the right way to root it. So i decided to bring it back to stock recovery.
But after flashing when i checked the status of my software, it states "Custom", how can i bring it back to "Official" status??
Im now using stock recovery, SM-G610Y - J7 Prime
Please advise how.
atocruz said:
Guys, i tried to used TWRP but unable to find the right way to root it. So i decided to bring it back to stock recovery.
But after flashing when i checked the status of my software, it states "Custom", how can i bring it back to "Official" status??
Im now using stock recovery, SM-G610Y - J7 Prime
Please advise how.
Click to expand...
Click to collapse
You have to flash stock firmware.So there are steps to flash stock firmware.
1.first download odin & stock firmware.( Stock firmware link - https://trueandroid.com/en/samsung-galaxy-j7-prime-sm-g610y-latest-stock-firmware-download-guide/ ))
2.then Go to download mode by pressing VOLUME DOWN + HOME + POWER BUTTON same time untill you see android logo after that press VOLUME UP button then your phone is in download mode .
3.Now run Odin & connect your ohone with pc .On odin it is showing that it is connected then dont touch anything in select PDA file when it select then choose the firmware file downloaded from link .But before selecting extract the file after extraction the file format will will be. tar.
4.Now click on start.
5.You have succesfully flash stock firmware.
raosahab said:
You have to flash stock firmware.So there are steps to flash stock firmware.
Click to expand...
Click to collapse
sir i am on may 1 android security patch level and i want to play pokemon go with joystick which is only possible on before march 1 android security patch level, is there any method for downgrading (with/without root)?
raosahab said:
You have to flash stock firmware.So there are steps to flash stock firmware.
1.first download odin & stock firmware.( Stock firmware link - https://trueandroid.com/en/samsung-galaxy-j7-prime-sm-g610y-latest-stock-firmware-download-guide/ ))
2.then Go to download mode by pressing VOLUME DOWN + HOME + POWER BUTTON same time untill you see android logo after that press VOLUME UP button then your phone is in download mode .
3.Now run Odin & connect your ohone with pc .On odin it is showing that it is connected then dont touch anything in select PDA file when it select then choose the firmware file downloaded from link .But before selecting extract the file after extraction the file format will will be. tar.
4.Now click on start.
5.You have succesfully flash stock firmware.
Click to expand...
Click to collapse
Will it reset my knox?