[Q] The official guide for installing cm12? - Barnes & Noble Nook Tablet

The official guide for installing cm12?
Hi everyone,
I have no idea if this is the place to post my question and I am really sorry if this is not.
Umm..
I would very much like to install CM 12 on the Nook Tablet from download.cyanogenmod.org/?device=acclaim&type= but I have no clue how to do it.
I tried the link wiki.cyanogenmod.org/w/Install_CM_for_acclaim which seemed a good place to start for a newbie until I saw this sentence "Bear in mind that the boot.img included with the Clockwork Mod Recovery does not support CM > 10.1.3" and belatedly realised that it wouldn't work for CM 12. *facepalm*
Now I am back to square 1 of ignoranceville and it's pretty lonely over here.
If someone would be gracious enough to help me out, it would be hugely, ginormously appreciated with ALL of my heart! :fingers-crossed:

If you installed cm10 and you have custom recovery just boot to fastboot (hold the 'n' button during start) and install the recovery from cm12 thread. After this install cm12.
It's worth noting that you have to convert userdata partition to f2fs for optimal performance. There are two tutorials how to do it in the cm12 thread.

As I understand it.
It is indeed lonely out there in the stix, fellow noob. When I first came to XDA looking for rooting instructions, I was told to read read read, and I have indeed been doing that. But even then my knowledge has a few gaps.
First, I have a factory resetted stock BNTV250 tablet that is at version 1.4.3. I want to get to the CM12 Lollipop 'acclaim' nightlies on github.
As far as I can understand, these are the current instructions as a general overview;
1) Go from BN stock (what I currently have) to CM10. There are a couple of threads around that have enough information to get someone to this point. You format the (micro) SD card on your computer for fat32.
2) Then use the TWRP 2.8.5.2 from that thread on a properly formatted SD card (now ext4?) card to use the desired image (in my case CM12). Reboot and install CM12 using TWRP.
3) Then, to increase the performance (highly suggested) go to the "CMxx [sdcard as Emulated] {Walkthrough} Guide." So you can merge partitions into one 'single' large partition. But I am not sure if this can include the external SD card that I want to use or not (i.e. in that same partition). Also, I am not clear what is the largest size of SD card I can use on the nook?
I am also unclear if I could use an external USB keyboard or not with that (with a micro USB to standard female USB adapter)?
Ok. That's scenario #1. I *could* get eventually through all that and end up with CM12 installed.
But the *much* preferred scenario #2 that I do not know if it exists or not (indications are that exists for some versions CMXX) is to;
1) format an SD card, transfer the proper files onto it, put it in the nook, reboot,
2) the nook boots and automagically installs the desired CM12 image (or prompts a couple of times).
3) Then you shut down, remove the SD card, reformat it (ext 4?) , and install on device to expand usable memory for all those movies/music someone might want to watch.
I really do not know if scenario 2 exists exactly. I do know that #1 can be done.
As I said, I'm a noob like OP, and if anyone can fill in a couple of the gaps while I wait on the memory card to be delivered, I would appreciate it!
Edit: I don't understand why it's not possible to "sideload" TWRP (or something similar) onto 1.4.3 stock nook, then install an CM12 image from there.
The XDA forums can be like a maze sometimes! :laugh:

I also am having trouble with anything higher than cm-10.1 . I have jelly bean working on my nook tablet (bntv250a) right now. With the usual bugs
These are the files I have working now. cm-10.1-20130117-19-acclaim-HD.zip and gapps-jb-20130812-signed.zip I have tried many other combinations of 10.1 and 10.2 and 11.1 always seem to end in boot loop. But I can seemingly ALWAYS boot those two files and bring jelly bean back. So I don't think there is anything fundamentally wrong with my install technique. Probably WRONG though !!!
I did finally try the latest cm12 and it amazingly did boot and not loop. BUT...... It immediately said android updating. Went through about 95 updating and then finally got to the welcome screen. Others have seem a million popups saying goo apps not working or something to that effect.
Anyway I was able to connect to wifi and start the registration. Unfortunately it was running VERY VERY SLOW !!! The keyboard kept disappearing and was so SLOW that I never made it through.
I am taking note of what kodjo said in a post above about f2fs. I'm going research that and see if I can figure it out. Kind of a last ditch effort.
Keep up the good work folks

latest snapshot for my B&N NOOK acclaim boot loops for me
latest snapshot for my B&N NOOK acclaim boot loops for me
latest snapshot for my B&N NOOK acclaim boot loops for me
This is what I tried the latest snapshot: cm-12.1-20151117-SNAPSHOT-YOG7DAO1K6-acclaim.zip
Constantly boot loops.
Had to revert back to this: cm-12.1-20151007-SNAPSHOT-YOG4PAO331-acclaim.zip
This is the gapps I'm using. Works fine with the 20151007 rom : open_gapps-arm-5.1-pico-20150923
What am I doing wrong ?
Any major changes in the recovery's ?
What is the recommended gapps ?
Had to revert back to this: cm-12.1-20151007-SNAPSHOT-YOG4PAO331-acclaim.zip
This is the gapps I'm using. Works fine with the 20151007 rom : open_gapps-arm-5.1-pico-20150923
Is there anyone using these old nooks anymore ?
Would it be possible for someone to post links to ROM's and GAPPS that are working on their 16gb B&N acclaim nook ?
That would be really appreciated. Then I can determine if it's my hardware or just my install.

Related

R3 Card for the Nook Tablet [Root, Rom and Recovery] by Albert Wertz

How to make your own R3 (Root, Rom, and Recovery SD Card)- Instructions by Albert Wertz
How to make your own R3 (Root, Rom, and Recovery SD Card)- Instructions by Albert Wertz
Demonstration of what the card will look like when it is done:
http://www.youtube.com/watch?v=8P2jM04x8V8
Root video for this card: http://youtu.be/VQuM2m61qts
Recovery Video http://www.youtube.com/watch?v=fXaK4itoS3U
I have created an image of this card, but it is HUGE in size I have paid to change hosting and can now provide you a link. Donations are greatly appreciated.
Standard disclaimer- you do all this at your own risk. I guarantee no results.
Download This files: (when installed it will change you sd card into a 2GB partition with all the files on it.
Link provided on a request basis. My bottle neck is 200GB per day and it was surpassed. So I have to take this measure to track people downloading these files. This is the price of hosting large files. if you want to download this, you must email me directly and download it only once.
You dont have to download CM7 specifically, you can chose any rom in the development section. CM7 is a great place to start.
http://www.youtube.com/watch?feature=player_embedded&v=fPzoxExjtes
rom installation instructions: http://www.youtube.com/watch?v=MVGOsobZbUU
Instructions:
1. Turn tablet on, make sure automount is on
2. Put SD card in
3. connect USB and PC
4. Extract all files from zip to desktop or folder of your choosing
5. Run win32diskimager
6. Select blue folder and chose SDR3NT16or8gbV47DiskImage.img
7. Make sure the location is pointed at your sd card that is mounted and NOT "Mynook"
8. Run- speed at which it will make the card is dependent on the class of card.
9. Image is created. Now follow video demonstration of R3 Root Rom and Recovery Card for 16GB NT.
You are welcome, Donate to support file hosting, it is appreciated.
new instructions not in the video for updated CM7 alpha final rom:
Put the gapps on the same partition and location as CM7 zip because you will flash it aswell.
Instructions:
1. Flash Cm7 rom
2. Factory restore, Clear cache, clear devlik
3. Install Gapps zip
4. Reboot system
5. enjoy
Constructive criticism is appreciated.
Unconstructive criticism will be reported.
reserved for future use
Awesome! The next time that I see my mom I will have to have one of these ready and flash her main device back to stock. If she likes it, then I'll put it on permanently.
Amazing work, can't wait to test it out.
albertwertz said:
I have created an image of this card, but it is almost a gig in size and do not have a way of hosting it for so many people to download...
Click to expand...
Click to collapse
Thanks for your numerous contributions to the community. Just a hosting idea, if you uploaded the image as a torrent, i'm sure folks on here would seed.
Sent from my SAMSUNG-SGH-I997 using Tapatalk
Usenet.
The old and reliable.
Always there to serve massive amounts of data.
Just post an NZB file here.
Just wanted to stop and say 'Thanks Albert!' for taking the time to do the video and list out all the steps. I had a few hiccups along the way but like with anything in life, persistence paid off.
My specific issues were not realizing the actual theory of what was going on here. I had to download the google apps .zip file extra and boot back into CWM to install it. I didn't understand that part at first. I wasn't prepared to actually keep an extra sd on hand for the occasional install/backup but I had a 2gb sitting around which worked out perfectly.
Again, thanks and all is working good as of right now! I also missed the part, if it was in the video and I passed over it, about installing the Nook Recovery.apk to install CWM. I blame lack of sleep.
if you added the sideloadable app packet, in there is an app called recovery flasher. this app allows you to install CWM on the tablet itself
I need to figure this out or I'm going back to BN stock firmware. This seems like the best option before i go back stock.
I wanna say I figured it out and you helped me in the other thread. I love the one you have background says tabletroms. Only issue as of now is when you bootup i get an error. The application Nook Unroot (process com.indirect.nook.unroot) has stopped unexpectedly. Please try again.
Not sure what thats about though.
video updated with how to make http://www.youtube.com/watch?feature=player_embedded&v=fPzoxExjtes
After shutting it down and inserting the R3 SD card, I plugged the power cable in and the Nook will not boot up. What am I doing wrong?
More info
greenlitego70 said:
After shutting it down and inserting the R3 SD card, I plugged the power cable in and the Nook will not boot up. What am I doing wrong?
Click to expand...
Click to collapse
I also tried without the cable using the power + n button and no matter how long I hold them, nothing happens. If I take the SD card out, it boots as normal.
I am also running 1.4.2. I just purchased the Nook yesterday. Could that have something to do with it?
I have gone through the entire process of making the R3 card twice and I get the same result. The nook will not boot up with this SD card in it.
is this an 8gb or 16gb nook tablet? it will not work on the 8gb
Mr. Wertz,
Please allow me a few moments to sing your praises (and those for everyone else involved in the creation of your wonderful 3R SD card!!)
I have no programming skills to speak of. Originally rooting my 16gb v.1.4.1 Nook Tablet was a long and tedious process using ADB, and drivers, and my computer, and several different files...
However, I eventually got it done, installed TB-Pro, homecatcher, Go-Launcher, and aproximately 177 other apps, books, and games... I was happy and content.
THEN Evil B&N pushed 1.4.2, killed my root and basically made my tablet non-functional (at least in the ways I was using it!) Lucky thing I had a recent TB backup of all the apps, but no way to restore them...
While searching XDA for a 1.4.2 root I came across your 3R SD card post... My time and frustration were worth more to me than the very modest price you were quoting, so I took that leap of faith and purchased the 3R along with an extra blank card...
Imagine my surprise to find the envelope laying on my doorstep the next morning when I returned home from breakfast with my wife!!! Your later email explained that you just happened to be in town on vacation, and had hand delivered it to my door! It being St. Paddy's day, I felt like I'd caught me a Leprechaun!
I watched your 3R instructional video at least 3 times, and read all the 3R related posts here and on TR Forums then Monday I rooted it, and then restored it back to out of the box factory condition! Following along with your video as I went it was easy as pie and worked flawlessly 1st time without a hitch!!
Tuesday I took it back to B&N and had them repartition it to give me 8gb of the 16gb internal storage! (Ye-Haw!!)
They had to look up the process in their manuals because that store had never done it before! LOL!! It took them longer to repartition the storage than all the time I spent Monday and today using your card and customizing it just the way I wanted it.
I had never bought apps from the B&N store, only books, so this morning (again following along with your video) I Put my trusty 3R back in and installed CM7 rooted, CWM (OTA now Fully Blocked) verified v.9.9.9 and got TB-pro back up and batch recovered all 179 apps, books, games, etc... I also downloaded the Android readers for both the Nook and the Kindle so I lost nothing and have a better tablet than ever before!!!
THANK YOU SO VERY MUCH for making what looked like a probable nightmare into an easy and FUN experience!
Now if you only had a magic SD Card that would push a fully rooted ICS Kernel and Rom into my AT&T Samsung Galaxy S Captivate... LOL!
Many Regards!
~Jim Mitchell
R3 Card in my situation
Hi Albert
RESOLVED!! Got N 4.6 root installed! Moving on to R3 card...but, take a look at my post on N 4.6 root thread, problems with supplemental apparently download. One question...all seems to be working (root confirmed using S EXPLORER, BUT device still reads BN 1.4.2 installed. Afraid of OTA but will probably upgrade to CM7 before one hits, I hope. Is this correct?
Thanks Albert
NEVER MIND BELOW.
So, I never got around to installing CM7 as we discussed in PM. I was still running your N4.5 root when HBOgo updated their app and I lost that application. Being the moron I am at times, I did not realize this was the cause, and thought somehow I had lost my root in backing up my SD card to my computer a day prior. So, I took my trusty CWM/N4.5 root card I had saved out and attempted to go back to factory install and reroot, assuming I could get my HBOgo back and then later install CM7 on an SD card as I had wanted. Oh well, I did that and even remembered to block OTA updates in NT Hidden Settings, but alas HBOgo was not working. Finally I realized my mistake...all I should have done was taken a back up of the earlier HBOgo app and replace the nasty update! Too little too late. So, I must have made a mistake in reinnstalling the root because I now have a tablet reflecting I'm running BN 1.4.2. I still have access to both the amazon and google play stores but having trouble downloading new apps from google play. AND, every time I try to run HBOgo I have to go back into Settings and clear a cache etc. So, i've borked the whole thing!
So, I've read through the site and discovered your R3 post and thought perhaps this is my best solution! (I am less enamoured with having the SD version of CM7 now that you have created this nifty little R3 card!).
My question is, can I go directly from where I am (BN 1.4.2) with some weird half rooted ?? version of N4.5 to CM7 using your R3 card? My concern is not the 1.4.2 as your video shows this isn't a problem. It is that I was rooting using the N4.5 rather than the N4.6 which you reference in the R3 tutorial?
I think this is the best plan but am hesitant to go for it. Your thoughts would be greatly appreciated!
Thanks.
Lisa
Disregard last post
Needed to download update to NT hidden settings to get OTA block and unauthorized apparently...just in case someone else runs into this.....not sure if NT app is old on zip or if my TB reinstalled old app version but there you have it.
Loving root with BN access....may just keep instead of CM7. As always thanks Albert.
L
image posted. 1.3 gigs, no need to build your own now. paid for proper hosting. donations appreciated.
Any possibility of a CM9 version on the radar??
Jim Mitchell said:
Any possibility of a CM9 version on the radar??
Click to expand...
Click to collapse
You can build a bootable CM9 and/or CM10 SDcard (but it's not a R3 card with CM9/10) using the instruction and files posted here and here.
My 16g has a corrupted partition table. I've tried every other repair/recovery method without any success. Does this recovery repartition as well?
Thanks for what you do.

[Q] Best method!?

Hey guys I'm pretty new here and i wanted to get some feedback, did not find any similar topics around.
I want to root my NT 16gb but i see a lot of different methods and ways to perform it, whats the best way of going?
CM9 or CM7?
Easiest method to do it?
i got a 16gb microSD also!
Any opinions?
THANK YOU!
Rooting and applying a custom rom like cm7 or cm9 do not necessarily go together, an unfortunate assumption many new android users make. The former allows you root access and thus you can do things with the device you otherwise would not have been able to do. Flashing a custom rom will literally change the operating system entirely. Both are also completely reversible. So the question is, what do you want? Root access or a new OS entirely (note that custom roms almost always have root access).
Sent from my NookTablet using Tapatalk
ooojnrooo said:
Hey guys I'm pretty new here and i wanted to get some feedback, did not find any similar topics around.
I want to root my NT 16gb but i see a lot of different methods and ways to perform it, whats the best way of going?
CM9 or CM7?
Easiest method to do it?
i got a 16gb microSD also!
Any opinions?
THANK YOU!
Click to expand...
Click to collapse
I'm fairly new at this also, got my 16G NT (1.4.1) a couple days ago, and I'll tell you what I did. At first, I rooted it because I wanted (at least) access to the Kindle reader, but the google market/play is not available so B&N could control it. Rooting AND installing google apps (aka gapps) give you the market and more. From there you can install the go launcher and have a pretty nice overlay that looks ICS-like. Here's what I used and it seemed to go pretty smooth:
Part 1:
This thread by the developer Indirect shows how to do the root along with gaaps:
http://forum.xda-developers.com/showthread.php?t=1466583
And here is an invaluable video from albertwertz that goes along with it. This helped me get the confidence to do it:
http://www.youtube.com/watch?v=I403bagL9rw
He has an update to this show at the beginning of the video, but I did not use that.
The secret sauce is in making a bootable SD card with both the image that gives you CWM (clockworks mod), which is basically a loader that allow you to then load the .zip file which contains the root and gapps files.
After I went through the process, nothing seemed to have changed at all on the NT, but after some head scratching I realized that gapps is the key and it had in fact been loaded. So hit the home button and then search and type in market. Voila, the google market is now there and you can download anything that is compatible with the NT (like kindle and the go launcher).
Part 2.
The go launcher is great, but everytime I hit home, I had to navigate to the go launcher and launch the nicer ics-like skin, so I decided to go for CM9. I'm not at all disappointed that I did. Netflix does not work, but seemingly everything else does and does nicely. Here's how:
Basically, you just need to get the CM9.003 file, and "flash" that just as you flashed the root and google apps zip. I'm sure you have figured out by now that flashing just means loading the new program into "flash" memory, which is just a read/write memory that is non-volatile. (does not erase at power down).
What I wound up up doing is placing the CM9 zip file on a separate SD card, then used the one I originally used for rooting to get into the CWM recovery program. Once there, pop it out and insert the CM9 zip and run that one from CWM. Reboot and you're running Android 4.0.4.
Here's the link for the CM9 install, courtesy of developer chrmhoffmann:
http://forum.xda-developers.com/showthread.php?t=1534192
Here's a link to the CM9 zip:
http://goo.im/devs/chrmhoffmann/cm9/update-cm9-acclaim-alpha0.03-fullofbugs.zip
One more thing: You actually should put two zips on that 2nd SD, the 2nd one being google apps (aka gapps), as for some reason it is not included in the CM9 zip as it was in step 1. Here's the link to that file:
http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps
It's the app for CM9, and just in case, here's the download link:
http://cmw.22aaf3.com/gapps/gapps-ics-20120317-signed.zip
So now you have 2 zips on the 2nd SD card. Run them both, first the CM9 zip and then the gapps zip, reboot.
Sorry that's so long, but that's what I did and it worked out well for me once I figured it out...
---------- Post added at 04:13 PM ---------- Previous post was at 04:07 PM ----------
One more thing. When you get into the CWM recovery program (the one you'll see when you boot from the 1st SD card, don't forget to run a backup of the original ROM, IE the factory version in case you want to go back.
I'm not an expert on the backup and recover process, and there apparently other ways to restore to the original NT 1.4.0 or 1.4.1, but I would do that anyway...
I wanted to say "very good" ! . and a note that i think should be added... is the importance of wiping the dalvik and the data cache within the flash process. . lots of people get clobbered by this ommission.
georgia boy said:
One more thing: You actually should put two zips on that 2nd SD, the 2nd one being google apps (aka gapps), as for some reason it is not included in the CM9 zip as it was in step 1.
Click to expand...
Click to collapse
Allow me to explain. Gapps, or google apps are a seperate package of apps created by google. They are not apps that are included with "pure" Android and thus Google does not want them included with roms for whatever legal reasons. They were included in the step 1 you gave because that is simply rooting. Rooting and throwing apps onto a rom like the stock version is not flashing a custom ROM. In fact its no different than if a developer were to release a custom rom that didnt have root access, but someone wrote a script that gave you root access and installed those google apps.
tl;dr gapps are legally required to be a separate package from custom roms.

[NEW] NT CM10 support thread

Now that CM10 has been released for the NT I have started up a proper support thread. Pleas keep it as back reports and help.
Please use this thread to post feedback and to ask questions. The Dev thread is for exactly that, development and not support! Please keep the development thread clear of support and feedback posts.
Live support may be available on irc.freenode.net irc channel #nook-tablet, if any of us are around we'll be happy to help but don't bug people if they are busy please. A web version of irc is available here http://webchat.freenode.net?channels=nook-tablet-chat
When posting a bug or issue please use the following format
----------Which install are you using (Internal or SD):
----------What version is your CM10 download that you are using (should be alpha final now):
----------Do you have any mods on your NT (updates or system modifications)
----------If yes to above what have you installed
----------Where is this bug (main system or which application):
----------Can this bug be easily replicated:
----------If yes to above how can we replicate it to check:
----------Description of the bug
----------Any other information we may find useful
(thank CelticWebSolutions for the text)
I would like to run CM10 from an sdcatd. I get lost following the directions iamafanof has on his blog. Does anyone have something clearer?
I just want to boot 10 from sd ,like CM 7 was.
Thanks.
Bill
Just use the same directions used in succulent's (iamafanof) directions on how to boot CM7/CM9 from sdcard. The only thing different is to use his CM10 boot from sdcard zip.
CM10 Install Assist?
UPDATED NEAR END - I am with you miniblue... I have been running an SD version of CM7 for sometime now and absolutely love it. However, would like to upgrade to CM10 and tried using imafanof's SD boot install but somehow I messed it up so now I am running some sort of hybrid of the Nook (still has original apps installed) and CM10. So now I have the nice polished look with none of the functionality.
If someone can help me with some tips as to how to flash and start fresh with a fresh install of CM10 I would be very grateful. Now I have a nook that boots up with cyanboot bootloader but loads a hybrid of CM10 and the nook truncated Android. Now I have the Nook purchased apps (don't care to have) and no ability to do much with the Jelly Bean other than having the nice polished look.
According to the Nook, I am running Android version 4.1.1, Kernel version 3.0.31+ ([email protected] #1), Cyanmod version 10-20120903-UNOFFICIAL-acclaim. Also - My Nook seems to now think it is a 8GB nook instead of the 16GB Nook that it really is. I have the new look but all the B&N apps and no functionality beyond that to speak of. Cannot change themes, etc.
So, I made a good bootable SD card to load emmc CM10. Installed it but still have the weird hybrid version of the Nook software on it. Do I need to format the emmc or something first? I followed the instructions as indicated by chrmhoffmann on this page: http://forum.xda-developers.com/showthread.php?t=1773362 - where it says this method will overwrite everything. What am I missing?
update: so I was able to use a CWM bootable SD and formatted emmc, user data, etc. Looks like CM10 is running exclusively. Trouble is, as can be expected, it is unstable and so it goes to black screen a lot, particularly when surfing/on wifi. May have to try CM9 for awhile until 10 gets to a bit better performance.
jelly bean sd card not mounting
Hi all,
I just flashed the jellybean rom, and everything is working smoothly. However, when i connect it to my computer. The sd card is not mounting. all i have access to is 1gb on my nook tablet.....
Any help?
Jelly Bean
hensley1971 said:
Hi all,
I just flashed the jellybean rom, and everything is working smoothly. However, when i connect it to my computer. The sd card is not mounting. all i have access to is 1gb on my nook tablet.....
Any help?
Click to expand...
Click to collapse
Not sure what to tell you but I used the SGT7 Jelly Bean ROM and I am not having that issue and the ROM is working great for me on emmc. Still getting some black outs on occasion but not too big of a deal.
8gb nook
does it work on 8gb nook tablet?
CM10 Jelly Bean on NT8 & Root BN 1.4.3
arcane76 said:
does it work on 8gb nook tablet?
Click to expand...
Click to collapse
Yes. It works fine. As everyone is aware, there are some Black Screen Of Death (BSOD) issues and a few random reboots but not to the point of a MAJOR issue.
I have posted my simple guide to installing the SGT7 (Meghd00t) ROM on my website here: http://raywaldo.com/2012/09/root-for-nook-tablet-1-4-3/ - includes video and my process worked to root & install on a stock Nook Tablet (8GB) running B&N v.1.4.3.
Thanks - - and USB disk issues.
raywaldo said:
Yes. It works fine. As everyone is aware, there are some Black Screen Of Death (BSOD) issues and a few random reboots but not to the point of a MAJOR issue.
I have posted my simple guide to installing the SGT7 (Meghd00t) ROM on my website here: http://raywaldo.com/2012/09/root-for-nook-tablet-1-4-3/ - includes video and my process worked to root & install on a stock Nook Tablet (8GB) running B&N v.1.4.3.
Click to expand...
Click to collapse
This is awesome. I'd been thinking about doing a full restore - re-root - install w/ CM10, and it's nice to have a method to follow.
BTW - Ray, (or anybody) have you heard of anyone having problems getting their PCs to recognize their Nooks as USB drives on CM10? It's seems like after a time my PC first stops recognizing the external SD (shows a mounted drive icon but shows no information or says 'please insert an SD card") . . . then eventually stops recognizing the internal "My Nook" drive as well. At one point I did a complete USB driver uninstall-reinstall using USBdeview, and it fixed the problem but only for a day. And it did not work the second time.
I know this is NT related because it happens on any PC I use. The problem is not present when using CM7.
Ideas?
I love sgt7! Can you thank too many times on xda?
I am new here though and I have a few questions. Has anyone been able to reproduce the sleep of death bug ? Or is it completely random? I have done some minimal Linux and android development and I would love to help with improving jelly on nt. I actually have two nook tab 16s. One is running sgt7 9.13 the other 9.14. I know I haven't searched as much as I could have just yet but I wanted to see if anyone would recommend some things I could do for the devs. Can we get a trace from adb when the bug occurs or do we lose the connection immediately before? Do we know where in the libs or kernel the bug may be lurking?
Sent from my Barnes & Noble Nook Tablet using xda app-developers app
CM10 USB Drive
timpilcher said:
This is awesome. I'd been thinking about doing a full restore - re-root - install w/ CM10, and it's nice to have a method to follow.
BTW - Ray, (or anybody) have you heard of anyone having problems getting their PCs to recognize their Nooks as USB drives on CM10? It's seems like after a time my PC first stops recognizing the external SD (shows a mounted drive icon but shows no information or says 'please insert an SD card") . . . then eventually stops recognizing the internal "My Nook" drive as well. At one point I did a complete USB driver uninstall-reinstall using USBdeview, and it fixed the problem but only for a day. And it did not work the second time.
I know this is NT related because it happens on any PC I use. The problem is not present when using CM7.
Ideas?
Click to expand...
Click to collapse
Not sure which CM10 you have. I am running the SGT7/Meghd00t and it works fine for me.
One thing that you probably already know.. When you connect, Windows will beep but may not display the file manager window.
If you have USB Debugging enabled, then you have to switch to mass storage mode. In the notifications area, you will have a little USB symbol. Click on it and follow the prompts to enable the Mass Storage mode.
Another note. I have Win7/64bit so it may be relative to that. But sometimes SDCard readers, etc have trouble with my USB 3.0 ports and I have to use them on the 2.0 port instead.
Thanks Ray!
Ray, just wanted to give you props for your tutorials. They are very thorough and explain things in great detail for those who are new but want to benefit from the greatness of ROMs and rooting.
/\/(_)777233 said:
Ray, just wanted to give you props for your tutorials. They are very thorough and explain things in great detail for those who are new but want to benefit from the greatness of ROMs and rooting.
Click to expand...
Click to collapse
Agreed. Now why didn't you hit his thanks button?
Odd
timpilcher said:
This is awesome. I'd been thinking about doing a full restore - re-root - install w/ CM10, and it's nice to have a method to follow.
BTW - Ray, (or anybody) have you heard of anyone having problems getting their PCs to recognize their Nooks as USB drives on CM10? It's seems like after a time my PC first stops recognizing the external SD (shows a mounted drive icon but shows no information or says 'please insert an SD card") . . . then eventually stops recognizing the internal "My Nook" drive as well. At one point I did a complete USB driver uninstall-reinstall using USBdeview, and it fixed the problem but only for a day. And it did not work the second time.
I know this is NT related because it happens on any PC I use. The problem is not present when using CM7.
Ideas?
Click to expand...
Click to collapse
That is odd. Mine hooks up and works great via USB. I am running CM10 SGT7.
/\/(_)777233 said:
That is odd. Mine hooks up and works great via USB. I am running CM10 SGT7.
Click to expand...
Click to collapse
I have to turn it off then let it boot up when usb is plugged into computer. Only way for me to have it recognise.
Sent from my ADR6300 using xda premium
I have been using cm10 for a while and LOVE it. However, the battery life is so terrible that it's unusable at the moment. I want to install cm7 instead until the battery life improves for this rom, but when trying to install it, it doesn't actually work (cm10 still boots up). Is there a specific process I need to follow to achieve this? Thanks.
mattman1983 said:
I have been using cm10 for a while and LOVE it. However, the battery life is so terrible that it's unusable at the moment. I want to install cm7 instead until the battery life improves for this rom, but when trying to install it, it doesn't actually work (cm10 still boots up). Is there a specific process I need to follow to achieve this? Thanks.
Click to expand...
Click to collapse
Provide more details. Does it go through the install process? Any errors? Does the cm7 install appear to complete too quickly? Are you using twrp or cwm? Have you wiped cache and data then tried installing 7?
SlowCobra96 said:
Provide more details. Does it go through the install process? Any errors? Does the cm7 install appear to complete too quickly? Are you using twrp or cwm? Have you wiped cache and data then tried installing 7?
Click to expand...
Click to collapse
Sorry for the lack of details. I'm using TWRP, trying to install the CM7 beta. I have wiped cache and data before flashing, as I always do. But yeah, the install seemed to complete suspiciously quickly, like 5 or 10 seconds. It does say that it completes successfully, however, with no errors.
Sent from my EVO using xda app-developers app
mattman1983 said:
I have been using cm10 for a while and LOVE it. However, the battery life is so terrible that it's unusable at the moment. I want to install cm7 instead until the battery life improves for this rom, but when trying to install it, it doesn't actually work (cm10 still boots up). Is there a specific process I need to follow to achieve this? Thanks.
Click to expand...
Click to collapse
I've had similar issues and I found in another thread that powering off and powering on the device enables Deep Sleep which helps immensely with battery life. The key seems to be remembering to do this after a SOD.
You have to do a complete power off/power on cycle, rebooting doesn't seem to work.
Sent from my Barnes & Noble Nook Tablet using xda app-developers app
LifeWOutMilk said:
I've had similar issues and I found in another thread that powering off and powering on the device enables Deep Sleep which helps immensely with battery life. The key seems to be remembering to do this after a SOD.
You have to do a complete power off/power on cycle, rebooting doesn't seem to work.
Sent from my Barnes & Noble Nook Tablet using xda app-developers app
Click to expand...
Click to collapse
Thanks, I'll give the power off/on cycle a chance (since I'm still using cm10 'til I get cm7 to work), and see if that helps.

[Q] Root 1.4.3 so I'm stuck with it rooted running android/nook together

The original post for the easy instructions to root the NT are a mess. The original instructions for doing it on Windows aren't even complete. I started building the files by following the Linux version of the instructions since they actually made sense and had the files you were to get.
If I'm not mistaken though I ended up using this to root the nook although it wasn't really what I was looking for considering I had CM7 and I would get a boot choice to go nook or android. That all stopped when the sd card I was using freaked itself and failed leaving me stuck at the N screen unless I pulled the SD card. My intentions were to leave the NT stock and not mess with it and run Cyanogen on the sd card. What it appears I'm left with though (without installing a rom) is a co-mingling Nook OS and Android OS since I'm now able to choose a launcher and I have Android screens with those launchers in the Nook itself. Which this is kinda cool because I don't have to reboot the system to switch to the reader anymore.
I installed Launcher 8 to give it some WIN8 love and easy access for my fiancee whom uses a mouth stick to get around in android easier. My problem I'm having is the android system doesn't seem complete. I'm assuming there are gaps missing or something because things are slow and some things aren't working when the icon is selected. Which simulates the program isn't actually there or the files to make it work.
Obviously there wouldn't be a phone but there are other things that used to work with the dual booting CM7 installed on the old SD card that aren't working now.
Since I'm not exactly sure if the above is how I ended up rooting the device I don't even know where to go from here to adding anything to it.
I'm not a developer and loaded this thing up about this time last year. The scenery has changed over the year and I'm kinda lost with all this again. Spent most of the day yesterday trying to figure out where I was and really got no where. So hopefully someone get's what I'm talking about and can give me the push in the right direction.
Not looking to make it dual boot again because this is easier for my fiancee to use like it is. Just want everything to work right like it should. I couldn't tell you what version android I have on here because I never actually loaded an individual rom yet there is android functioning on the device. My idea was to get the newest android which isn't 4.4 yet and is actually from what I can tell that is working would be JB. Yet I have no clue what this thing is running on with the loader and such I have on it.
I'm not enirely sure what it is you want, You say you don't want dual boot, and yet you talk about the non-wotking sd card as if you actually want dual boot.
Anyway, IF you want dual boot you don't need to root it at all. Just burn an sd card with a ready-made CM10.x image, pop it in and boot up. Then choose either internal, stock boot or run from sd-card.
Here is a link to a page with ready-made sd card image file:
http://iamafanof.wordpress.com/2012/11/18/cm10-0-jellybean-sdcard-img-for-nook-tablet/
(This guy, Succulent, has inages of later versions of CM10.x as well, but this is the one I had a link to wothout having to go look for it.)
If you want the Tablet back to fresh "out of the box" condition you can use a repart.img that you can find by looking around a bit. I have referred to it in several posts, but I don't have a link at hand right now, Google is your friend...
asawi said:
I'm not enirely sure what it is you want, You say you don't want dual boot, and yet you talk about the non-wotking sd card as if you actually want dual boot.
Anyway, IF you want dual boot you don't need to root it at all. Just burn an sd card with a ready-made CM10.x image, pop it in and boot up. Then choose either internal, stock boot or run from sd-card.
Here is a link to a page with ready-made sd card image file:
http://iamafanof.wordpress.com/2012/11/18/cm10-0-jellybean-sdcard-img-for-nook-tablet/
(This guy, Succulent, has inages of later versions of CM10.x as well, but this is the one I had a link to wothout having to go look for it.)
If you want the Tablet back to fresh "out of the box" condition you can use a repart.img that you can find by looking around a bit. I have referred to it in several posts, but I don't have a link at hand right now, Google is your friend...
Click to expand...
Click to collapse
*The non working sd card*
It was running as a dual boot before with cyogen or something like that and it would be selectable to go to Nook or the CM7 Android. That card somehow just died and can't even be seen in Windows anymore (have an rma filed with Patriot).
I rooted the nook and now I have what appears to be a partial android OS running inside the BN Nook OS but things aren't functioning. (I prefer it like this vs the dual boot way) So it's like I need a gapps file or something. All settings links lead to the Nook OS settings page and nothing get's me to the Android settings which is why I state it appears to be a partial Android OS. I don't even know what OS version it is because nothing fully functions with the Android side of things. (Take the Launcher8 Loader I installed. No icons actually open what they should. Selecting an icon leads to that icons settings and not what it should be opening. I have the same loader on my Skyrocket so I know how it SHOULD function and selecting an icon to get options for it is not correct. You have to press and hold to get the button to set the icon options.)
You won't get "proper" Android just by rooting. For that you need to install CM x.x. Either install it internally or run it from sd (that you apparently don't want to do)
I have not followed the particular root process you used, but both of the ones I have used myself come with gApps included.
The ones I have used:
http://forum.xda-developers.com/showthread.php?t=1488035
Or
http://forum.xda-developers.com/showthread.php?p=21275927#post21275927
The first one (Brian’s) require a 2 GB card the other one (Albert’s) just needs a very small card. (I think 128 MB would do, but I don’t have any that small to try)
Both give good instructions in their topics.
Both install gApps.
asawi said:
You won't get "proper" Android just by rooting. For that you need to install CM x.x. Either install it internally or run it from sd (that you apprently don't want to do)
I have not followed the particular root process you used, but both of the ones I have used myself come with gApps included.
The ones I have used:
http://forum.xda-developers.com/show....php?t=1488035
Or http://forum.xda-developers.com/show...7#post21275927
The first one (Brian’s) require a 2 GB card the other one (Albert’s) just needs a very small card. (I think 128 MB would do, but I don’t have any that small to try)
Both give good instructions in their topics.
Both install gApps.
Click to expand...
Click to collapse
404 on the first link and not found on the other link. LOL Your having the luck I am.
LOL looks like you found out yourself.
scgt1 said:
404 on the first link and not found on the other link. LOL Your having the luck I am.
LOL looks like you found out yourself.
Click to expand...
Click to collapse
Edited links so they work now.
asawi said:
Edited links so they work now.
Click to expand...
Click to collapse
Brian's method looks a hell of a lot familiar like that may have been what I did instead but the listing of apps with his doesn't match what I have on the nook now: (only thing I didn't put in the list was what I installed off google play which is launcher8)
android reader
car home
chess
contacts
crossword
downloads
email
es file explorer
flash player settings
getjar
google search
home
home manager
home catcher
hulu plus
music player
my media
netflix
news and weather
nook friends
nook video
nookhwtest
nookviewer
nt hidden settings
pandora
play store
sound recorder
spare parts
splashtop remote
sudoku
superuser
talk
testcenterservice
twitter
That is all the installed apps that pull up under the Nook OS with using Launcher8 and swipping the homescreen to the left it pulls up a list of installed apps just like windows phone.
It must be brians anyway because I just opened the nook hidden settings and under the about Nook Tablet Hidden Settings it shows:
Contact information: [email protected]
Version 0.5.0
I'm just going to move this over here:
asawi said:
This is the development section. Not meant for Q&A. I've already told you how you can return the Tablet to out of the box condition over in that section.
Sent from my Nook HD+ using Tapatalk 4
Click to expand...
Click to collapse
It is the development section I am aware of that and can read. I'm in the 10.2 thread which is actually what I want running on the NT. So what better place to get the help for it then in the thread for it like everyone else has.
Actually you are incorrect as you say nothing about returning the tablet to stock out of the box. Must have been someone else your thinking of. I don't want it to be out of the box though. The nook OS was already setup with apps and books etc. I just want to reverse the rooting I guess to remove the stock android from it so I can then use the links you provided to create a correct root and dual boot using wait for it.....
CM 10.2
dup post
scgt1 said:
I
Actually you are incorrect as you say nothing about returning the tablet to stock out of the box.
Click to expand...
Click to collapse
Really?? Read the last two lines in my first post in this topic.
Also, there is a sticky on top of the topic list in the development section about what is meant to go there and what's not: http://forum.xda-developers.com/showthread.php?t=1499105
asawi said:
Really?? Read the last two lines in my first post in this topic.
Also, there is a sticky on top of the topic list in the development section about what is meant to go there and what's not: http://forum.xda-developers.com/showthread.php?t=1499105
Click to expand...
Click to collapse
Ok I stand corrected on that matter, but stock out of the box isn't what I want.
I'm not sure you can undo what you've done without loosing content. But as long as you backup your sideloaded stuff, your BN books and apps can be dowloaded at any time.
I suppose you can stay rooted and just disable your alternative launcher and what have you, but you said something about your system being slowed up, and I susoect fixing that without a wipe of some sort would be difficult. Could be wrong though snce I haven't dealt with that myself. Let's hope someone that knows better might come along with advice more to your liking.
While waiting for that you can always make one of the CM 10.x sd card images and run it.It will work completely independent from your trublesome stock OS.
System isn't slow at all also anything side loaded came from B&N so could also be redownloaded like the books. I was just hoping to keep all that intact as it was. There just aren't certain things working that should is all. I'm sure if I was a dev and understood all this stuff more clear I could fix it. I would rather take the easy cheesy way out and just redo it. lol Too much stuff around the house falling behind while messing with this thing.
scgt1 said:
...
Not looking to make it dual boot again because this is easier for my fiancee to use like it is. Just want everything to work right like it should. I couldn't tell you what version android I have on here because I never actually loaded an individual rom yet there is android functioning on the device. My idea was to get the newest android which isn't 4.4 yet and is actually from what I can tell that is working would be JB. Yet I have no clue what this thing is running on with the loader and such I have on it.
Click to expand...
Click to collapse
The BN stock ROM is based on Android v3.2 ("Honeycomb"). Rooting it essentially enables you to install additional apps beyond those that came with the stock ROM, either via the Playstore or by side-loading & installing the apps' .apk files (rooting packages/tools themselves typically add some commonly used apps (Email, Playstore, etc.) to get the user started).
The risk of using rooted stock ROM on the NT (especially as BN won't be releasing any more update for it) is you're stuck with the Android 3.2 base, thus as developers' support for 3.2 wanes over time you won't be able to install newer apps or even newer updates of many current apps. This same "Android version obsolescence" consideration also applies to CM7 and CM9.
As such I think it make the most sense to install CM10 to replace the stock ROM internally on emmc. If you value stability over having the latest/greatest bells/whistles, try Succulent's CM10.0 version dated 12/31/12, or the CM official 10.1.3.
digixmax said:
The BN stock ROM is based on Android v3.2 ("Honeycomb"). Rooting it essentially enables you to install additional apps beyond those that came with the stock ROM, either via the Playstore or by side-loading & installing the apps' .apk files (rooting packages/tools themselves typically add some commonly used apps (Email, Playstore, etc.) to get the user started).
The risk of using rooted stock ROM on the NT (especially as BN won't be releasing any more update for it) is you're stuck with the Android 3.2 base, thus as developers' support for 3.2 wanes over time you won't be able to install newer apps or even newer updates of many current apps. This same "Android version obsolescence" consideration also applies to CM7 and CM9.
As such I think it make the most sense to install CM10 to replace the stock ROM internally on emmc. If you value stability over having the latest/greatest bells/whistles, try Succulent's CM10.0 version dated 12/31/12, or the CM official 10.1.3.
Click to expand...
Click to collapse
So CM 10 can replace the current android OS inside Nook? Or are you saying CM 10 will replace the Nook OS all together if put on the emmc?
scgt1 said:
So CM 10 can replace the current android OS inside Nook? Or are you saying CM 10 will replace the Nook OS all together if put on the emmc?
Click to expand...
Click to collapse
It will alltogether replace the Nook OS. As said in one of the posts in the development section thread they are mutually exclusive.
If you want to keep any of the original Nook functions you cannot run another Android veresion except from sd-card (meaning dual boot).
asawi said:
It will alltogether replace the Nook OS. As said in one of the posts in the development section thread they are mutually exclusive.
If you want to keep any of the original Nook functions you cannot run another Android veresion except from sd-card (meaning dual boot).
Click to expand...
Click to collapse
That's what I thought but the other user made it seem like CM 10 would replace the Honeycomb OS. So that leaves with with waiting for other input on the possibility to unroot without going to complete stock on the Nook..........
scgt1 said:
That's what I thought but the other user made it seem like CM 10 would replace the Honeycomb OS. So that leaves with with waiting for other input on the possibility to unroot without going to complete stock on the Nook..........
Click to expand...
Click to collapse
Unroot without going to complete stock??
Your options:
Unrooted = stock.
Rooted stock (what you run now) = stock but with access to system files and ability to use for example Google Play store.
Install CM 10.x internally = completely replacing Nook OS.
Dual boot: Running CM 10.x from sd card, leaving the Nook OS (rooted or unrooted, either works) internally. Remove sd-card or reboot through Cyanoboot (you can leave the card in the device) to get to Nook OS.
asawi said:
Unroot without going to complete stock??
Your options:
Unrooted = stock.
Rooted stock (what you run now) = stock but with access to system files and ability to use for example Google Play store.
Install CM 10.x internally = completely replacing Nook OS.
Dual boot: Running CM 10.x from sd card, leaving the Nook OS (rooted or unrooted, either works) internally. Remove sd-card or reboot through Cyanoboot (you can leave the card in the device) to get to Nook OS.
Click to expand...
Click to collapse
Yea haven't heard back from anyone on the returning to stock without the complete reset so It looks like I will be moving books over in the near future.
So I'm getting back onto this thing and finishing it up either tonight or tomorrow.
Resetting the Nook to stock can all be done via the nook settings correct? IE no sd card needed.

Need help flashing Galaxy Payer 5.0 // EDIT -- FIXED

EDIT:Turns out I just needed to try some different ROMs. Everything went fine when I installed SlimBean 4.3, then Carbon ROM 4.4, then gapps. Sorry for the useless thread.
I have been periodically attempting to get a custom ROM onto my device for weeks: In recovery mode I would get error messages about failing to mount the external SD card, backups would all disappear, roms stored on the SD card would get an error message telling me the file was bad even after moving them to USB storage (and Kies won't recognized the device, so I couldn't even upgrade back to 2.3.6 after flashing the stock rom) ... anyway, after replacing and reformatting my external SD today I finally managed to flash CyanogenMod 9. That's the good news.
The bad news is that I'm missing gapps, making the new ROM kind of useless. When I try to flash gapps in recovery mode it gets far enough to show the ASCII art logo (whereas in GB it used to just tell me it couldn't open the file), then immediately quits with an error message along the lines of "build.prop not found". The same thing happens if I try to install CM 11.
Some things I've seen made me think that maybe I should update ClockworkMod using ROM Manager but it asks me to choose my device from a list which doesn't include the Galaxy Player.
I'm currently redownloading gapps in case that file is one of the one's that's been messed up by being put on my old SD card, as well as some other ROMS in case one of them will work (maybe if I try Jelly Bean instead of going straight to KitKat?) I'm not actually attached to installing CM in particular, in fact I'd probably rather try Carbon or Beanstalk, and really at this point I'll take anything that works.
So anyway, help would be really, REALLY appreciated here because I'm really tired of spending my entire afternoon downloading files only to have none of them work.

Categories

Resources