Unoffical Candy5
This rom has been ported for gsm uers on ls990
Flashing Instructions:
Make a backup if you don't have one
Perform a FULL WIPE from another ROM
flash -candy5-RC.v0.9.0-DARK-UNOFFICIAL
Then flash candy5-gsm-patch
Flash whatever GAPPS you want I don't care
Gsm users got to settings/more/Cellular networks/Access Point Names and choose your apn and then reboot
Credits goes to the Candy Team this is just a port for gsm users
Download Links
candy5-rc-dark - http://d-h.st/QT9l
candy gsm patch - http://d-h.st/001
If you would like to donate,but by all means not necessary you can paypal or google wallet - [email protected]
Sorry of this post looks like crap I did from my mobile app
Nice!!!! Now "we" just need to get stock zv8 on gsm. Great job dude!!!!
::::::;;;;;;;;;;;;;
1619415 said:
Nice!!!! Now "we" just need to get stock zv8 on gsm. Great job dude!!!!
Click to expand...
Click to collapse
Working on that too
That would be quite stellar... However for the time being, thanks for this, need a new network...
Sent from my LGLS990 using XDA Free mobile app
Make sure you flash the patch too everyone
CDMA without gsm patch?
Will this fix work on all cm12 roms or just this rom? Also is there any way I can make it work on official cm12?
shivaagarwal1 said:
Will this fix work on all cm12 roms or just this rom? Also is there any way I can make it work on official cm12?
Click to expand...
Click to collapse
No this is based off d851 T-Mobile.
thznutz87 said:
CDMA without gsm patch?
Click to expand...
Click to collapse
No this is gms ROM the patch is really for just the driver files
So I've never dealt with this gsm & APN settings stuff before. I just dl a rom for my device, flash it & go. So does that mean that this is totally not for me & I can't flash, or can I flash it & it'll run on sprint like most other roms?
aheeejd said:
So I've never dealt with this gsm & APN settings stuff before. I just dl a rom for my device, flash it & go. So does that mean that this is totally not for me & I can't flash, or can I flash it & it'll run on sprint like most other roms?
Click to expand...
Click to collapse
This is for gsm users only
OK so Im just seeing this ... Is your DU ROM a gsm port too ? Is the gsm.prop the same as in the DU post or should I download and use the one in op ?
steeldonkey1 said:
OK so Im just seeing this ... Is your DU ROM a gsm port too ? Is the gsm.prop the same as in the DU post or should I download and use the one in op ?
Click to expand...
Click to collapse
Yes DU is a port too. I just wanted to give another option for people. But I'm not running this I'm running DU. If you try this you have to flash the patch for this as soon as I learn how to pack this crap in the system-new.dat we won't have all these zips
D-FUSE said:
Yes DU is a port too. I just wanted to give another option for people. But I'm not running this I'm running DU. If you try this you have to flash the patch for this as soon as I learn how to pack this crap in the system-new.dat we won't have all these zips
Click to expand...
Click to collapse
OK cool just wanted to make sure I wasn't missing anything lol
eh.. im still using zv4 from the very begining, and i always using gsm..
so, now i think, is it true that every custom rom that doesn't have "gsm port" on their title label aren't capable for using gsm??
and i must use a ported gsm of custom rom in my case??
i'm sorry, still a newcomer..
NFC
NFC is not working, also this is cyanogenmod 12 base.
wawa9292 said:
eh.. im still using zv4 from the very begining, and i always using gsm..
so, now i think, is it true that every custom rom that doesn't have "gsm port" on their title label aren't capable for using gsm??
and i must use a ported gsm of custom rom in my case??
i'm sorry, still a newcomer..
Click to expand...
Click to collapse
Yeah porting these roms makes it a lot easier on gsm users.
jannmedia said:
NFC is not working, also this is cyanogenmod 12 base.
Click to expand...
Click to collapse
Yes this is cm12 base and yes NFC doesn't work. Doesn't work on my DU. That is next on the list to fix
Good job
D-FUSE said:
Yes this is cm12 base and yes NFC doesn't work. Doesn't work on my DU. That is next on the list to fix
Click to expand...
Click to collapse
Its working good in GSM, nice job
Related
I want to introduce to you some new stuff!
# STOCK to KEXEC #
This is a patch to boot any Stock-based rom via Kexec. The kernel was made by the STS-Dev-Team (Hashcode & Dhacker) and I just fixed some small things, nothing special.
It can be useful in example for GSM-Users who want to run .16 VZW Based Roms. Now you don't have to wipe your CID anymore. Just keep your stock EU kernel and be able to run the VZW Roms!
Note: This kernel is NOT modified! No OC or sth like that! I am currently working on a stock-mod kernel!
This will NOT work on normal stock rom! You MUST use a stock-based rom!
May not work for CHINESE Rom!
Instructions
Download the patch (Selection depends on your device/rom - CDMA or GSM based rom)
Reboot into recovery and flash it over your stock-based rom
Reboot
Enjoy
Note: BMM users, make sure you have KEXEC enabled in boot options!
Click to expand...
Click to collapse
# GSM/CDMA Patch #
THis patch is for stock-based roms!
Feature:
Patch a stock-based CDMA Rom to GSM
Patch a stock-based GSM Rom to CDMA
Instructions
Download the patch you need
Flash it over your stock-based rom
Reboot
Enjoy
Click to expand...
Click to collapse
Downloads
KLICK
Click to expand...
Click to collapse
NEWS
I am currently working on a direct port of JBX-Kernel for Stock roms - better saying it already works so far. But have to do some fixes and mods because battery seems not that good as it should.
SOURCE: https://github.com/dtrail/kernel_mapphone_kexec/tree/stock-mod
[Also in branch "test" you can find current progress]
Click to expand...
Click to collapse
KERNEL SOURCE
https://github.com/dtrail/kernel_mapphone_kexec/tree/stock-jb-kexec
CREDITS
STS-Dev-Team (Hashcode & Dhacker)
Devehmanish
alteredlikeness
Ravikirancg
artur0588 - for providing a fixed GSM Patch!
So I'm a gsm latam user. If I want to use a cdma rom, let's say Bionx, I need to flash rom, then patch for radio and finally kexec patch?
Sent from my XT910 using Tapatalk 2
Okay still trying to read up on all this awesome news. Just a few questions.
I'm going to flash catalyst ROM and I'm on CDMA .16 . I'm going to download the patch witch takes me from CDMA to GSM.. correct? Then install ROM as normal then flash the CDMA to GSM patch then reboot phone? Is that correct order? Or should I do diffrentley?
Sent from my DROID RAZR using Tapatalk 4 Beta
ddmclw said:
Okay still trying to read up on all this awesome news. Just a few questions.
I'm going to flash catalyst ROM and I'm on CDMA .16 . I'm going to download the patch witch takes me from CDMA to GSM.. correct? Then install ROM as normal then flash the CDMA to GSM patch then reboot phone? Is that correct order? Or should I do diffrentley?
Sent from my DROID RAZR using Tapatalk 4 Beta
Click to expand...
Click to collapse
I am also had a qustion sam with you, i am using china stock rom and already dele my CID, will it aviliable to patch to kexx?
Sent from my XT910 using Tapatalk 2
Please read the FULL post!
No need for CID wipe!
Yes, its correct like you said. Just see the downloads, the names should explain itself.
And also keep in mind that you may not be able to safe APN on CDMA to GSM patch (at least on catalyst) but maybe it works for you...
If someone has any idea to fix it, tell me. Or if someone wnats to help, I will send you something you can try around.
Ok I installed eclipse rom which is based on verizon .16 and I'm on latam .17 so far is workig ok,time for some heavy duty testing,thanks mate.
Sent from my DROID RAZR using xda premium
A big congratulations to d trail and everyone else involved this is great news indeed.
I'm sure allot of people will relate to this , being stuck on eu jb and NOT BEING ABLE to flash vrzn and China stock roms - until now
Thank you so much
Edit; just booted eclipse rom working flawlessly
Sent from my XT910 using xda app-developers app
dtrail1 said:
Please read the FULL post!
No need for CID wipe!
Yes, its correct like you said. Just see the downloads, the names should explain itself.
And also keep in mind that you may not be able to safe APN on CDMA to GSM patch (at least on catalyst) but maybe it works for you...
If someone has any idea to fix it, tell me. Or if someone wnats to help, I will send you something you can try around.
Click to expand...
Click to collapse
I did it long time ago, and you don't need libs. Full cdma to gsm patch made by me here http://d-h.st/2Bv. Working with any leak and official verizon rom.
By the way, kexec patch do not working with chinse rom.
artur0588 said:
I did it long time ago, and you don't need libs. Full cdma to gsm patch made by me here http://d-h.st/2Bv. Working with any leak and official verizon rom.
By the way, kexec patch do not working with chinse rom.
Click to expand...
Click to collapse
Hi Artur, may i ask which version of Chinese rom you use? 4.1.2-6.7.2_GC-404-430?
lzto1320 said:
hi artur, may i ask which version of chinese rom you use? 4.1.2-6.7.2_gc-404-430?
Click to expand...
Click to collapse
6.7.2_gc-384-spdu-801
Say true verizon JB ROMS also have not boot with CDMA kexec patch and GSM kexec patch. May be kexec kernel do not support init.d with symsearch.ko module?
Finally i boot my ARTMOD for DROID RAZR XT912 on my EMEA RAZR XT910 with stock EMEA kernel after removed init.d which load symsearch.ko module. It's a little strange that stock 16 VZW support symsearch.ko but kexec not.
artur0588 said:
6.7.2_gc-384-spdu-801
Click to expand...
Click to collapse
Chinese has released a final JB firmwares,fix some bugs more faster and stable, if drail's patch working, you can give a try, it's worth man.
Lzto1320 said:
Chinese has released a final JB firmwares,fix some bugs more faster and stable, if drail's patch working, you can give a try, it's worth man.
Click to expand...
Click to collapse
Chinese kernel is always different from all other kernels - have always been like that... if someone might drop me a source I will build it for kexec.
dtrail1 said:
Chinese kernel is always different from all other kernels - have always been like that... if someone might drop me a source I will build it for kexec.
Click to expand...
Click to collapse
thank you very much dtrail1,here is the firmware link, i'm not sure if it can be help.
fastboot-p2b_spyder-umts_spyder-user-4.1.2-6.7.2_GC-404-430-release-keys-ChinaRetail-CN_chn.tar.gz
http://pan.baidu.com/share/link?shareid=452390&uk=1849135075
Lzto1320 said:
thank you very much dtrail1,here is the firmware link, i'm not sure if it can be help.
fastboot-p2b_spyder-umts_spyder-user-4.1.2-6.7.2_GC-404-430-release-keys-ChinaRetail-CN_chn.tar.gz
http://pan.baidu.com/share/link?shareid=452390&uk=1849135075
Click to expand...
Click to collapse
Not the firmware, the SOURCE for the KERNEL.
artur0588 said:
I did it long time ago, and you don't need libs. Full cdma to gsm patch made by me here http://d-h.st/2Bv. Working with any leak and official verizon rom.
By the way, kexec patch do not working with chinse rom.
Click to expand...
Click to collapse
thanks for the link, I'll try it.
But I tried it also without the libs and it started acting crazy for me.. I remember that my old GSM Patch (that one for ICS AOSP ROms from last year) worked w/o libs (partly)...
dtrail1 said:
thanks for the link, I'll try it.
But I tried it also without the libs and it started acting crazy for me.. I remember that my old GSM Patch (that one for ICS AOSP ROms from last year) worked w/o libs (partly)...
Click to expand...
Click to collapse
Now the GSM Patch will not need libs again, just modify build.prop is working good.artur0588 make it.
Lzto1320 said:
Now the GSM Patch will not need libs again, just modify build.prop is working good.artur0588 make it.
Click to expand...
Click to collapse
you tried it already? APN woprks?
dtrail1 said:
you tried it already? APN woprks?
Click to expand...
Click to collapse
yes, it has been a long time.....
Lzto1320 said:
yes, it has been a long time.....
Click to expand...
Click to collapse
You mean you didn't test it NOW?
Edit: btw, artur, you just posted my old GSM patch build.prop (see my name a hundred times in it)
dtrail1 said:
You mean you didn't test it NOW?
Click to expand...
Click to collapse
artur has given answer.
I was browsing the xiaomi site and I found that it has a download for miui on the "HTC butterfly dna" but I don't know which phone it's for, though the picture of the device is obviously the Verizon DNA, so if anyone wants to try it i'll put the link for the official download and you guys can post the results.
http://en.miui.com/download-206.html
I tried it a few weeks ago, because I was curious. DO NOT FLASH IT.
The ROM works just fine, but it's meant for GSM-only on the Butterfly/DNA. It won't connect to the Verizon network at all, even after modifying the radio settings and doing the *#*#4636#*#* dialer trick to default to CDMA. After you flash it, with any other subsequent ROM you flash afterwards, the radio will still be broken. The only solution to fix it is re-flash the stock recovery and stock radio again.
It probably wouldn't be *too* much work to modify the ROM to make it Verizon-compatible, but I haven't had time to look into it much. All I know is it won't work as is.
---------- Post added at 07:22 PM ---------- Previous post was at 07:12 PM ----------
I should also point out that MIUI for HTC devices is currently based on Android 4.2, so app performance isn't as good as it could be.
Once MIUI is re-based to 4.4, it should be easier to fix the GSM-defaulting issue as well, due to the OS improvements on that front.
Sorry to bring up and old thread...but....would this work on the VZW DNA (unlocked/S-off) using ATT?
ThePunisher said:
Sorry to bring up and old thread...but....would this work on the VZW DNA (unlocked/S-off) using ATT?
Click to expand...
Click to collapse
It should. I've had no problems beforehand.
Sorry to bring up an old thread (deja vu?), but what is the chance we will see MIUI V6 ported to the DNA? I would do it myself but I don't know anything about porting at all. :\
simcardslot said:
It should. I've had no problems beforehand.
Sorry to bring up an old thread (deja vu?), but what is the chance we will see MIUI V6 ported to the DNA? I would do it myself but I don't know anything about porting at all. :\
Click to expand...
Click to collapse
I could do it. As long as we get a MIUI V6 ROM on a working CDMA base, (preferably the VZW HTC One) I could port it over to the DNA no problem.
shoes22 said:
I could do it. As long as we get a MIUI V6 ROM on a working CDMA base, (preferably the VZW HTC One) I could port it over to the DNA no problem.
Click to expand...
Click to collapse
What would it take to get it on a CDMA base, in terms of under the hood code?
shoes22 said:
I could do it. As long as we get a MIUI V6 ROM on a working CDMA base, (preferably the VZW HTC One) I could port it over to the DNA no problem.
Click to expand...
Click to collapse
could you compile/build one for GSM? A lot of us DNA users are using our devices on GSM carriers these days......
Here is a link to the latest MIUI for HTC One (m7)
http://en.miui.com/download-111.html
ThePunisher said:
could you compile/build one for GSM? A lot of us DNA users are using our devices on GSM carriers these days......
Here is a link to the latest MIUI for HTC One (m7)
http://en.miui.com/download-111.html
Click to expand...
Click to collapse
If you have GSM, there should already be a working port for you...
http://en.miui.com/download-206.html
(Haven't tested it personally, but feel free to take a look.)
shoes22 said:
If you have GSM, there should already be a working port for you...
http://en.miui.com/download-206.html
(Haven't tested it personally, but feel free to take a look.)
Click to expand...
Click to collapse
I would love MIUI also but be careful the butterfly is a different phone then ours
shoes22 said:
If you have GSM, there should already be a working port for you...
http://en.miui.com/download-206.html
(Haven't tested it personally, but feel free to take a look.)
Click to expand...
Click to collapse
v4.7.11 reboots when using media content like Gallery apps. I have tried different Gapps packages and playstore apps. all with eh same end result.
The previous version 4.7.4 boots just fine but gives a storage is full error every now and then when trying to install apps.
Sent from my HTC6435LVW using Tapatalk
ThePunisher said:
v4.7.11 hangs at the MIUI bootscreen. It does not matter if you flash the 18mb 4.7.11 update on top of 4.7.4 or flash the full 4.7.11 Rom, same result.
The previous version 4.7.4 boots just fine but gives a storage is full error every now and then when trying to install apps.
Sent from my HTC6435LVW using Tapatalk
Click to expand...
Click to collapse
v.4.7.11 is pretty buggy. After clean flash make wipe cache, dalvik and fix permission from recovery before first launch.
P.S. IMHO v.4.6.13 is the last(most) stable.
I am here again to share new rom
LiquidSmooth is an aftermarket firmware based on AOSP and SlimROM.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP and SlimROM base, and then add the features you crave! While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device. We ask that you do your part to know your device and know how to recover from problems before you flash!
IT IS WORKING JUST SS LAST VERSION. NOT WORKING BMM. IF WANT TO USE _ YOU NEED TO SWITCH TO SAFESTRAP 3.75
SAFESTRAP HERE : http://droid.cs.fau.de/cm-12.0/pre-alpha-test/new_safestrap/Safestrap/
Here Links for Spyder : http://drdevs.com/devs/teamliquid/Nightly/Moto_Razr_Verizon/
Here Links for UMTS_Spyder : http://drdevs.com/devs/teamliquid/Nightly/Moto_Razr_Umts/
Here Links for Gapps ( PA Gapps 5.0 ) : http://forum.xda-developers.com/showthread.php?p=56810851#post56810851
I'll change the post when I get free time
Testing Now rom. Here some problem or anything
Report Bugs Here : https://plus.google.com/communities...9/stream/328f27b8-7492-4c68-a6ce-00fdea59ada2
anticor248 said:
Testing Now rom. Here some problem or anything
Click to expand...
Click to collapse
Great rom with more features than cm12!
Can we report bugs?
Thanks for the new thread!
Any features?
Majkus_ said:
Any features?
Click to expand...
Click to collapse
The only nice feature besides center clock is ad blocker.
Nice initial Lollipop release
It is a nice start. Pretty much the same issues as the CM12 pre-alpha release. The screen pixelation on some transitions and screen rotation. Wifi password and some settings not surviving a reboot. Data has been working but always shows an 'R' as if it were roaming.
Looking forward to seeing these issues getting worked out and having more features added. :good:
morr22066 said:
It is a nice start. Pretty much the same issues as the CM12 pre-alpha release. The screen pixelation on some transitions and screen rotation. Wifi password and some settings not surviving a reboot. Data has been working but always shows an 'R' as if it were roaming.
Looking forward to seeing these issues getting worked out and having more features added. :good:
Click to expand...
Click to collapse
To fix data roaming go to unofficial AOKP 4.4.4 thread by @tonyt. and download APN fix. He has one for xt912 and xt910. Install it in SafeStrap and no more roaming.
This is what I did and it fixed my roaming issue.
Sent from my XT912 using Tapatalk
Is it compatible with BMM
Great news for BMM users I tryed just SS last 3.75 works good.
zupervisor said:
Is it compatible with BMM
Click to expand...
Click to collapse
anticor248 said:
Great news for BMM users I tryed just SS last 3.75 works good.
Click to expand...
Click to collapse
Actually, I think he was asking if it's working with BMM, lol. It was said that no 5.0x rom is compatible with bmm due it being too outdated with no SELinux support.
Unless someone tries and proves it otherwise, best not to get everyone's hopes up.
Aceofzeroz said:
Actually, I think he was asking if it's working with BMM, lol. It was said that no 5.0x rom is compatible with bmm due it being too outdated with no SELinux support.
Unless someone tries and proves it otherwise, best not to get everyone's hopes up.
Click to expand...
Click to collapse
I tried it on bmm but it does not work even after modifying the meta-inf folder. So I had to switch to SS
sShadowSs said:
To fix data roaming go to unofficial AOKP 4.4.4 thread by @tonyt. and download APN fix. He has one for xt912 and xt910. Install it in SafeStrap and no more roaming.
This is what I did and it fixed my roaming issue.
Sent from my XT912 using Tapatalk
Click to expand...
Click to collapse
I can not find the version for xt910. Can you give me a post nr.
Thanks
Sent from my XT910 using XDA Premium 4 mobile app
darko1515 said:
I can not find the version for xt910. Can you give me a post nr.
Thanks
Sent from my XT910 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It here http://drdevs.com/devs/teamliquid/N.../LS-LP-v4.0-2014-12-03-liquid_umts_spyder.zip
Sent from my XT910 using XDA Free mobile app
darko1515 said:
I can not find the version for xt910. Can you give me a post nr.
Thanks
Sent from my XT910 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
here you go, these are the APN config for xt910:
http://forum.xda-developers.com/showpost.php?p=57272421&postcount=165
I can not move to SS because the CID was lost me :crying: anyone know if SS give support to skip the CID deleted?
Lukenshin said:
I can not move to SS because the CID was lost me :crying: anyone know if SS give support to skip the CID deleted?
Click to expand...
Click to collapse
What is this CID u guys talk about??
And how does it get lost??
CID =Crime Investigation Department??
Sent from my XT912 using XDA Free mobile app
mickeyasamoah said:
What is this CID u guys talk about??
And how does it get lost??
CID =Crime Investigation Department??
Sent from my XT912 using XDA Free mobile app
Click to expand...
Click to collapse
LoL No men; CID is a unique number which had to delete to install global updates android versions released in some countries and BMM to a backup and erased it and jump to the CID verification for the RAZR normal boot mode dead with directrix 0x000 ...
wow, that's so amazing ROM updating so quickly. Thanks for all you have done for users.
Wow
Guys...incredible
Realy impressive fast and smooth,only some glicth when rotate the phone
I like a lot the setting menu,more better dark than the lollipop white one
The dailer is the faster that i ever had ( i would like it dark too)
My camera don't work with stock and google app,it do with fv-5 camera lite,focal beta and camera ics...with the last two 8mpx and 1080p video
Hope brigthness controll using the status bar came soon
Realy great job:good::good::good:
Here is a patch to run International 5.0 lollipop roms NL9 , BOA3, BOB7 and BOC2 based roms on Sprint S5. BOB7 And BOC2 will work for Odex or Deodexed roms. NL9 and BOA3 will only work on Deodexed Roms only. Flash Patch right after you install the rom
SPR_Lollipop_5.0_International_Rom_Patch_BOC2_v1.zip
SPR_Lollipop_5.0_International_Rom_Patch_BOB7_v1.zip
SPR_Lollipop_5.0_International_Rom_Patch_BOA3_v1.zip
SPR_Lollipop_5.0_International_Rom_Patch_NL9_v1.zip
Has anyone tested this with Virgin Mobile devices (typically they need no modification from the sprint roms thus far, just curious)
berzerkus said:
Has anyone tested this with Virgin Mobile devices (typically they need no modification from the sprint roms thus far, just curious)
Click to expand...
Click to collapse
If your able to flash the leaked sprint lollipop rom and it works then this patch will work on international lollipop roms as long as they are deodexed and NL9 base You just need to make sure your running NKD firmware
What is modified by this patch? Can it be used (either in its current state or with slight modification) to convert touchwiz based unified ROMs to work with Sprint?
This is nice! Would love to see a patch to get KLTE AOSP based ROM's working on the KLTESPR as well. I've been drooling over the LP builds of LiquidSmooth since they started supporting KLTE... I know that our device will probably be picked up eventually, but I have no patience! Lol. Even possible?
Added A Patch for BOA3 Builds
Hello @jrkruse will your patch work on this ROM (SAPCE X ROM) http://forum.xda-developers.com/galaxy-s5/development/rom-spacex-lp-4-2-max-optimize-t3012414
The Developer seems to mention it is for SM-G900P in his header but he is yet to build it. SO will his Rom and your patch over the Rom work?
Kindly assist. Before I take the plunge.. which will be any minute though.. growing restless
Thanks for the help
reft4u said:
Hello @jrkruse will your patch work on this ROM (SAPCE X ROM) http://forum.xda-developers.com/galaxy-s5/development/rom-spacex-lp-4-2-max-optimize-t3012414
The Developer seems to mention it is for SM-G900P in his header but he is yet to build it. SO will his Rom and your patch over the Rom work?
Kindly assist. Before I take the plunge.. which will be any minute though.. growing restless
Thanks for the help
Click to expand...
Click to collapse
This patch will work with any BOA3 Base rom. Just keep in mind that flashing the patch adds sprint features customers ,sales_code.dat and build.prop so some of the custom settings may not be the same as the rom indicates.
Adding a light version patch for BOA3 Based Roms. This patch will retain more of the roms International features and also maintain any build.prop tweeks and feature.xml mods that the roms creator added. It will only install the minimum amount of files and only change necessary build.prop files. The result should be as close to the creators rom as possible. This is just like the other patch. Flash right after you install the rom before you reboot to setup menu. I need some people to try this and let me know.
Light_Lollipop_5.0_International_Rom_Patch_BOA3.zip
AthieN said:
This is nice! Would love to see a patch to get KLTE AOSP based ROM's working on the KLTESPR as well. I've been drooling over the LP builds of LiquidSmooth since they started supporting KLTE... I know that our device will probably be picked up eventually, but I have no patience! Lol. Even possible?
Click to expand...
Click to collapse
I dont mess with AOSP. Just goto your favorite rom and request them to make it for sprint
jrkruse said:
I dont mess with AOSP. Just goto your favorite rom and request them to make it for sprint
Click to expand...
Click to collapse
Thanks
Just tried the light version sith SpaceX ROM worked flawlessly
---------- Post added at 05:55 ---------- Previous post was at 05:43 ----------
jrkruse said:
Adding a light version patch for BOA3 Based Roms. This patch will retain more of the roms International features and also maintain any build.prop tweeks and feature.xml mods that the roms creator added. It will only install the minimum amount of files and only change necessary build.prop files. The result should be as close to the creators rom as possible. This is just like the other patch. Flash right after you install the rom before you reboot to setup menu. I need some people to try this and let me know.
Light_Lollipop_5.0_International_Rom_Patch_BOA3.zip
Click to expand...
Click to collapse
One question though I have app called lte discovery and it's showing TD LTE what's that and will Sprint adjust bi)ING
I never seen this
Check an and it's the same as your international setting
TIA
Worked pretty well
I installed your Original BOA3 patch over Space X 4.2 rom (before booting into the setup) and worked perfectly.
Feels good to check out what else new ROMS I can flash on this.
Any idea how to change the Data icons from a circle with GSM and 3G to the up and down arrows chaning from H to H+ etc?
kmcphee said:
Thanks
Just tried the light version sith SpaceX ROM worked flawlessly
---------- Post added at 05:55 ---------- Previous post was at 05:43 ----------
One question though I have app called lte discovery and it's showing TD LTE what's that and will Sprint adjust bi)ING
I never seen this
Check an and it's the same as your international setting
TIA
Click to expand...
Click to collapse
Im sure your on Sprint LTE since nobody else uses their band of LTE
reft4u said:
I installed your Original BOA3 patch over Space X 4.2 rom (before booting into the setup) and worked perfectly.
Feels good to check out what else new ROMS I can flash on this.
Any idea how to change the Data icons from a circle with GSM and 3G to the up and down arrows chaning from H to H+ etc?
Click to expand...
Click to collapse
Next time try the light patch it will keep settings like that. You can change in the build.prop
ro.product.name=kltespr change to ro.product.name=kltexx
jrkruse said:
Im sure your on Sprint LTE since nobody else uses their band of LTE
Click to expand...
Click to collapse
Thanks for the reply
Worked. What would happen to us noobs if you guys are not there .. Thanks Man.
reft4u said:
Worked. What would happen to us noobs if you guys are not there .. Thanks Man.
Click to expand...
Click to collapse
I was a noob once!
New light patch for BOA3 Roms
this version keeps the framework-res.apk and the framework.jar from the original rom and just replaces needed files so if mods have been done to these 2 files they will not be affected.
You will have to start with a fresh install to use this patch
Light_Lollipop_5.0_International_Rom_Patch_BOA3_v2.zip
jrkruse said:
Here is a patch to run International 5.0 lollipop roms NL9 and BOA3 based roms on Sprint S5. This is for Deodexed Roms only. Just flash right after you install the rom
Full Patch BOA3 Roms (Use this to convert to Sprint features and layouts. May loose some of original rom mods and tweaks)
Light Patch BOA3 Roms (Use this patch to retain rom features and mods)
Older Patches
Click to expand...
Click to collapse
Does this patch makes any BOA3 based G900F ROM (like the rom space lx 4.2) work on my SPRINT G900P work ????
i got G900P from the USA and i want to use it (4G also) internationaly ............
daveyaz said:
Does this patch makes any BOA3 based G900F ROM (like the rom space lx 4.2) work on my SPRINT G900P work ????
i got G900P from the USA and i want to use it (4G also) internationaly ............
Click to expand...
Click to collapse
Should work. Try the light one
I've been using different custom roms for Kenzo and all of them seem to be missing on one feature. VoLTE. Is there any technical difficulty that prevents the developers from intergrating it or something else.
I'd like to know if any any custom ROM supports it as of now.
Let me be clear. This is not a feature request, no offence on any dev. Just wanna know the technical side of it.
#AFAIK CM13 by thestrix has that feature on latest build
setyosn said:
#AFAIK CM13 by thestrix has that feature on latest build
Click to expand...
Click to collapse
Can I flash that with ordinary TWRP
AravindhStanley said:
Can I flash that with ordinary TWRP
Click to expand...
Click to collapse
yup
So did it work?
suku_patel_22 said:
So did it work?
Click to expand...
Click to collapse
Awaiting SIM activation..
Please give the link to the rom with volte support
AravindhStanley said:
Awaiting SIM activation..
Click to expand...
Click to collapse
Did volte works on that cm 13 build ..? plz reply
It didn't work on any custom ROM. Using Slim ROM with Jio Join app for calls.
AravindhStanley said:
It didn't work on any custom ROM. Using Slim ROM with Jio Join app for calls.
Click to expand...
Click to collapse
Jio4g voice does not work for me they say a provisional update is required any solution
setyosn said:
#AFAIK CM13 by thestrix has that feature on latest build
Click to expand...
Click to collapse
Did u try latest nightly there is VoLTE support.
can you guys try this and give feedback
u have to make 2 apns like below...before that delete all the apns from your mobile
Apn1:
name--- Jio
apn-------jionet
server--www.google.com
apn type--default,supl
rest leave as it is...then save the apn....now create the 2nd apn
Apn2:
name--Jio
apn----ims
apn type-ims
rest leave as it is..then just save the apn...
GamerX007 said:
Jio4g voice does not work for me they say a provisional update is required any solution
Click to expand...
Click to collapse
Idk, just maybe try reinstalling from play store.
Can anyone confirm that lastest cm13 version by thestix support VoLte ?????
Amanm said:
Did u try latest nightly there is VoLTE support.
Click to expand...
Click to collapse
Have u used it? Does it work for u?..there has been no mention about it in the rom page..
This cm 14.1 from has volte .
Flash ROM Gapps and cm 14 firmware as routine boot change APN settings to jionet
https://www.androidfilehost.com/?fid=529152257862681714
ruhul5 said:
can you guys try this and give feedback
u have to make 2 apns like below...before that delete all the apns from your mobile
Apn1:
name--- Jio
apn-------jionet
server--www.google.com
apn type--default,supl
rest leave as it is...then save the apn....now create the 2nd apn
Apn2:
name--Jio
apn----ims
apn type-ims
rest leave as it is..then just save the apn...
Click to expand...
Click to collapse
Didn't worked
Tried on santosh cm14.1 build