[Q] Going from custom recovery/ROM back to stock. - ZTE Z7, Z7 Max, Z7 Mini

I have a Nubia Z5S Mini, I know this is the Z7 forum but there's no Z5 forum to go to. I'm currently running Euphoria OS 5.0.2 on my Z5S Mini and have version 2.8.0.0 of TWRP Recovery on it. My baseband is stuck at H118 while I believe the latest official baseband is H125. I would like to ask if it is possible to flash the stock recovery, flash the latest official firmware zip to update my baseband and then reflash TWRP and my custom ROM on it. I could try to do that without asking but I don't know if it will work and I have no idea how to unbrick it if something goes wrong. I've searched a bit for it on Chinese forums but it's hard to make out any details with google translate.
Thanks!

Related

Installation MIUI on Galaxy S3 with Samsung stock 4.3 rom

Hello gentlemen, I have Galaxy S3 and I have there stock rom from samsung android version 4.3 (specifically i9300XXUGNA8) and I would like to try a MIUI rom. However I find guide only with downgrade on stock rom version I9300XXDLJ4 which is android 4.1.1. But I know that it used old EFS file version 1 and in my rom is EFS v2. So if I downgrade it, the telephone was not work - especially signal from operator. Does anyone have any advice or some guidance on how the stock Samsung rom to MIUI. Thanks for the advice. (and sorry for my english)
pisek3 said:
Hello gentlemen, I have Galaxy S3 and I have there stock rom from samsung android version 4.3 (specifically i9300XXUGNA8) and I would like to try a MIUI rom. However I find guide only with downgrade on stock rom version I9300XXDLJ4 which is android 4.1.1. But I know that it used old EFS file version 1 and in my rom is EFS v2. So if I downgrade it, the telephone was not work - especially signal from operator. Does anyone have any advice or some guidance on how the stock Samsung rom to MIUI. Thanks for the advice. (and sorry for my english)
Click to expand...
Click to collapse
I've used the MIUI rom for s3, and trust me, it's really good. The only downside is that you have to downgrade to android version 4.2.2 which is CM based. The latest version is based on 4.2.2, not 4.1.1
You have to do this:
1) Root your s3 following a proper guide. There are plenty on the net. Just google it.
2) Install a custom recovery. I recommend TWRP or Philz Touch recovery.
3) Download the MIUI rom from their official website en.miui.com
4) Flash the rom using the recovery.
Done. Hope this helped

[Q] S2 Custom Rom help!

Hey everyone, this is my first thread on this huge community. Can someone suggest me a custom ROM that can be flashed using ODIN or Mobile ODIN or via CWM 4.0.x.x? I've tried twice to install the 6.0.x.x version, but in both cases I soft bricked my device
I am searching for a Stable ROM, possibly kit kat or higher (but an improved version of Jelly Bean would be OK).
I would really like a Lollypop Custom ROM, but, as I sad before, I failed twice. Thanks for your help!
iTz_Aleex said:
Hey everyone, this is my first thread on this huge community. Can someone suggest me a custom ROM that can be flashed using ODIN or Mobile ODIN or via CWM 4.0.x.x? I've tried twice to install the 6.0.x.x version, but in both cases I soft bricked my device
I am searching for a Stable ROM, possibly kit kat or higher (but an improved version of Jelly Bean would be OK).
I would really like a Lollypop Custom ROM, but, as I sad before, I failed twice. Thanks for your help!
Click to expand...
Click to collapse
Hello,
You should update your recovery to this: http://forum.xda-developers.com/galaxy-s2/development-derivatives/kernel-t2291756
You cannot flash a kitkat or a lollipop ROM with a CWM 4.0.X.X recovery as it is very old.
Once you've installed the above mentioned latest Apolo kernel, you can go ahead and flash any other ROM normally as you would do with any other recovery.
Regards

How to find the stock android version if you are running a custom ROM on any android?

I am using a XT1022 and a custom ROM of Android version of 6.0.1. I want to use a stock ROM right now.
Earlier, i had a stock version of my ROM but the last time i flashed it, my mobile got OTA upgrade. And later i again flashed a custom ROM but now, i could not perform my stock ROM flash. Can anyone tell me how to find the present stock version of my android?
Why do you want to go to stock Rom?They are outdated.
Still if you want stock lollipop then visit this thread http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111

I want to install custom ROMS

Hi. I've been searching all over xda to find out what exactly I need to do to be able to flash custom roms running 7.1 Nougat, but I find my self bouncing back and forth trying to figure out the exact procedure to take, in which I need clarification and guidance.
Specs:
Model: KIW-L24
Build: KIW-L24C567B130
Android Version: 5.1.1 (Lollipop)
Rooted: YES
Boot loader status: UNLOCKED
TWRP installed: YES
I am wanting to flash custom ROMs like lineage and cosmicOS, but they all require a stock MarshMallow update before proceeding. Please correct me if I'm wrong, but this is how I think I am supposed to do this:
1st: download KIW-L24C567B331_Stock_Plus_Stock_Recovery.7z (Which I believe is MM 6.0.1)
2nd: flash the stock image and recovery using TWRP
3rd: flash TWRP back on to get rid of stock recovery
4th: flash custom ROM that requires a stock MM update
Is this the correct procedure?
Thank you.
righteousman777 said:
Hi. I've been searching all over xda to find out what exactly I need to do to be able to flash custom roms running 7.1 Nougat, but I find my self bouncing back and forth trying to figure out the exact procedure to take, in which I need clarification and guidance.
Specs:
Model: KIW-L24
Build: KIW-L24C567B130
Android Version: 5.1.1 (Lollipop)
Rooted: YES
Boot loader status: UNLOCKED
TWRP installed: YES
I am wanting to flash custom ROMs like lineage and cosmicOS, but they all require a stock MarshMallow update before proceeding. Please correct me if I'm wrong, but this is how I think I am supposed to do this:
1st: download KIW-L24C567B331_Stock_Plus_Stock_Recovery.7z (Which I believe is MM 6.0.1)
2nd: flash the stock image and recovery using TWRP
3rd: flash TWRP back on to get rid of stock recovery
4th: flash custom ROM that requires a stock MM update
Is this the correct procedure?
Thank you.
Click to expand...
Click to collapse
All are correct and u dont need to flash that stock recovery as u need only twrp for flashing custom rom

downgrade to kitkat

hii
my friend is using meizu m1 note marshmallow version.
he has updated it a few days but he didn't like the update and want to downgrade it back to kitkat..
we have stock update.zip for kitkat flyme rom..
but I didn't find twrp or cwm for my device in order to flash the zip but i have a few questions:-
1.could i flash the zip via stock recovery?
2.please let me know if there is any universal flashing tool available for this purpose.
3.please share ideas and suggestions to downgrade it..
thanks

Categories

Resources