First of all, This is not entirly my original work. credits goes to quangnhut123 , who modified LG Flash tool for us. I am just sharing this GUIDE for flashing lolipop to L90
Quote:
I have tested this method myself and it is working perfectly for me, but it is also possible that it might not work for you for some reasons, so don't panic, just post your problem or whatever error you are facing (please attach screenshot if possible). I or other thread members will try to troubleshoot it. After resolving the problem I'll update this post, so that other members do not face such problem again.
Quote:
PLEASE, USE THIS TUTORIAL AT YOUR OWN RISK, IF SOMETHING WENT WRONG (because of your stupidity) ME OR XDA WILL NOT RESPONSIBLE FOR YOUR LOSS.
Flashing KDZ file removes Root and CWM, so you will need to root again.
Flashing KDZ file does not wipe your data, but if you get bootloops you need to hard-reset it, so please backup data first.
Note -
EVERYTHING IN THIS ROM IS WORKING Even the Knock Code , Camera ,DOuble Tap, ANd Everything Your DEvice Is Capable Of.
If Due To Some Reason Your Device Slows Down After The Update Please Do A Factory Reset Of the Device It Will Work Fine Again With Lolipop. :good:
1. Download KDZ file
To download KDZ File Of Lolipop for you Device GOTO
https://yadi.sk/d/PRPkYggqf4v4C For lolipop 5.0.2
https://yadi.sk/d/2OoNsU3wf5vku For lolipop 5.0.0
2. Precautions:-
Enable Show Hidden Files in Folder Option (Don't disable this option until kdz flashing process completes) and Delete the LG Mobile Tool folder (if exist) from
C:\ProgramData\
Remove all other USB devices (external HDD, backup drives, other phones, etc.) and cables connected to PC to avoid issued due to voltage loss.
OFFLINE KDZ FLASHING DOES NOT LOOSE PHONE DATA, BUT YOU MUST BACKUP YOUR PHONE IN ANY CASE.
3. Downloads:-
Download The Zip File From Here- http://www.mediafire.com/download/s2qqa3p464pbxp7/LG_Flash_Tool_2014.zip
4. Install LG Drivers (internet required for this):
Extract B2CAppSetup.zip anywhere on PC and Run B2CAppSetup.exe as administrator. Accept Agreement and a window will appear. Click on OK button (Bottom Right) on instructions. Now connect your LG Device to PC in LG Software mode. B2CAppSetup tool will detect it. Now Click on Install USB Drivers (2nd option on Top Left). It will automatically download and install drivers for your device. If Install USB Drivers options goes grey (Disable) after detecting phone, it means latest USB Drivers are already installed.
After installing USB Drivers please REBOOT YOU PC
Now Connect Phone in Software Upgrade Mode: Switch OFF the phone and Press VolumeUP button and insert USB cable into the phone, Now phone should show Firmware Upgrade Mode.
Let windows load any drivers, wait until it finishes. TWO ENTRIES SHOULD APPEAR IN DEVICE MANAGER IF DRIVERS ARE PROPERLY INSTALLED
Download File From Here- http://www.mediafire.com/download/3ir140wxq9mxa31/B2CAppSetup.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After installing device drivers unplug the phone from PC
5. Starting The Installation Process:
Extract LG Flash Tool 2014.zip to A Folder
Note-
Copy The KDZ file to the same folder where all the files of lg Flash Tool 2014 is extracted- [For Better Results]
Open LG Flash Tool 2014 folder and run LGFlashTool2014.exe and administrator.
LG Flash Tool 2014 windows will appear.
Select "3GQCT" in Type of Flash.
Select "EMERGENCY" for PhoneMode.
Select your KDZ file in the Select KDZ File box.
Press "Normal Flash" button. (as pic below)
IMPORTANT: Do not change the names of the KDZ files. (They should look like.... "D41020B_00.kdz" )
Now Again Connect Phone in Software Upgrade Mode: Switch OFF the phone and Press VolumeUP button and insert USB cable into the phone, Now phone should show Firmware Upgrade Mode.
Now "Read Phone Information" box will open with blank information, Just press "Start"
Now "Select country and language" small box will open. Here select "Different Country" and "English" and press "OK"
The utility starts the official LG Mobile Support Tool
Now actual flashing will start, and if your KDZ file is good flashing will end without any issue.
JUST RELAX!! SIT BACK WITH HANDS FOLDED BEHIND HEAD AND WATCH IT HAPPENING.
When it finishes full flashing and phone will start rebooting.
YOU CAN REMOVE CABLE AFTER 100%, AND FLASHING IS FINISHED!!! Close all programs.
DON'T FORGET TO HIT THANKS IF IT HELPED...
.
Lets See It May or May Not Work
Martin213 said:
Nice tut thank you,can this build run on D405n?
Click to expand...
Click to collapse
Well I have Never Tested This On ANy Another Device Except For LG L90 D410
If you want to try this on your Lg L90 D405n i recommend to get a kdz file for your model as a backup
To download KZD for you Device GOTO lg-firmware-rom.com
Enter IMEI no of your device.
TO GET THE IMEI OF YOUR PHONE go to About Phone in settings and get your imei no or else remove the battery and see there it will be written.
Do Post If This Worked On Your Device
Best Of Luck With The Trial :good: :good:
my phone is lg l90 d410(v10d-IND-xx),can i flash using kdz flasher??
will there be any kind of problems???
Will a message box pops up when restart the phone: "this version is not for users"
Other languages
in the window "select country and language" is only available English? happens to have Portuguese?
Perfect
is working perfectly on my L90 d410nh......Thanks
Ya there might be a mag in some of the devices but that is due to network nothing is related to the rom and there will not be anybkind of problem due to it.
Sent from my LG-D410 using XDA Free mobile app
Xzyrate there is only english language option in this rom no other language is present
Wellbi am glad that i could help
Sent from my LG-D410 using XDA Free mobile app
Other languages
OsFreakxx said:
Xzyrate there is only english language option in this rom no other language is present
Wellbi am glad that i could help
Sent from my LG-D410 using XDA Free mobile app
Click to expand...
Click to collapse
Worked in portuguese!
Would this kdz work in 405n variant? Or at least with phew bugs?
I dont think that you should try this its a totally different varient as it has different hardware configuration
Sent from my LG-D410 using XDA Free mobile app
OsFreakxx said:
First of all, This is not entirly my original work. credits goes to quangnhut123 , who modified LG Flash tool for us. I am just sharing this GUIDE for flashing lolipop to L90
Quote:
I have tested this method myself and it is working perfectly for me, but it is also possible that it might not work for you for some reasons, so don't panic, just post your problem or whatever error you are facing (please attach screenshot if possible). I or other thread members will try to troubleshoot it. After resolving the problem I'll update this post, so that other members do not face such problem again.
Quote:
PLEASE, USE THIS TUTORIAL AT YOUR OWN RISK, IF SOMETHING WENT WRONG (because of your stupidity) ME OR XDA WILL NOT RESPONSIBLE FOR YOUR LOSS.
Flashing KDZ file removes Root and CWM, so you will need to root again.
Flashing KDZ file does not wipe your data, but if you get bootloops you need to hard-reset it, so please backup data first.
Note -
EVERYTHING IN THIS ROM IS WORKING Even the Knock Code , Camera ,DOuble Tap, ANd Everything Your DEvice Is Capable Of.
If Due To Some Reason Your Device Slows Down After The Update Please Do A Factory Reset Of the Device It Will Work Fine Again With Lolipop. :good:
1. Download KDZ file
To download KDZ File Of Lolipop for you Device GOTO
https://yadi.sk/d/PRPkYggqf4v4C For lolipop 5.0.2
https://yadi.sk/d/2OoNsU3wf5vku For lolipop 5.0.0
2. Precautions:-
Enable Show Hidden Files in Folder Option (Don't disable this option until kdz flashing process completes) and Delete the LG Mobile Tool folder (if exist) from
C:\ProgramData\
Remove all other USB devices (external HDD, backup drives, other phones, etc.) and cables connected to PC to avoid issued due to voltage loss.
OFFLINE KDZ FLASHING DOES NOT LOOSE PHONE DATA, BUT YOU MUST BACKUP YOUR PHONE IN ANY CASE.
3. Downloads:-
Download The Zip File From Here- http://www.mediafire.com/download/s2qqa3p464pbxp7/LG_Flash_Tool_2014.zip
4. Install LG Drivers (internet required for this):
Extract B2CAppSetup.zip anywhere on PC and Run B2CAppSetup.exe as administrator. Accept Agreement and a window will appear. Click on OK button (Bottom Right) on instructions. Now connect your LG Device to PC in LG Software mode. B2CAppSetup tool will detect it. Now Click on Install USB Drivers (2nd option on Top Left). It will automatically download and install drivers for your device. If Install USB Drivers options goes grey (Disable) after detecting phone, it means latest USB Drivers are already installed.
After installing USB Drivers please REBOOT YOU PC
Now Connect Phone in Software Upgrade Mode: Switch OFF the phone and Press VolumeUP button and insert USB cable into the phone, Now phone should show Firmware Upgrade Mode.
Let windows load any drivers, wait until it finishes. TWO ENTRIES SHOULD APPEAR IN DEVICE MANAGER IF DRIVERS ARE PROPERLY INSTALLED
Download File From Here- http://www.mediafire.com/download/3ir140wxq9mxa31/B2CAppSetup.zip
After installing device drivers unplug the phone from PC
5. Starting The Installation Process:
Extract LG Flash Tool 2014.zip to A Folder
Note-
Copy The KDZ file to the same folder where all the files of lg Flash Tool 2014 is extracted- [For Better Results]
Open LG Flash Tool 2014 folder and run LGFlashTool2014.exe and administrator.
LG Flash Tool 2014 windows will appear.
Select "3GQCT" in Type of Flash.
Select "EMERGENCY" for PhoneMode.
Select your KDZ file in the Select KDZ File box.
Press "Normal Flash" button. (as pic below)
IMPORTANT: Do not change the names of the KDZ files. (They should look like.... "D41020B_00.kdz" )
Now Again Connect Phone in Software Upgrade Mode: Switch OFF the phone and Press VolumeUP button and insert USB cable into the phone, Now phone should show Firmware Upgrade Mode.
Now "Read Phone Information" box will open with blank information, Just press "Start"
Now "Select country and language" small box will open. Here select "Different Country" and "English" and press "OK"
The utility starts the official LG Mobile Support Tool
Now actual flashing will start, and if your KDZ file is good flashing will end without any issue.
JUST RELAX!! SIT BACK WITH HANDS FOLDED BEHIND HEAD AND WATCH IT HAPPENING.
When it finishes full flashing and phone will start rebooting.
YOU CAN REMOVE CABLE AFTER 100%, AND FLASHING IS FINISHED!!! Close all programs.
DON'T FORGET TO HIT THANKS IF IT HELPED...
Click to expand...
Click to collapse
Im Try to flash but 47% done then software hang n stop
error at startup after phone finished booting up
Hi,
My LG L90 D410 phone started giving the below error at startup after I upgraded to Lollipop 5.0.2. Though everything works fine. please advice.
Thank you
Software Update...
hello...
My d410 got stuck at 54% when it was updating and ever since have been trying do it again but it will still stop at 54%... what can i do to revert it and i have tried factory resetting it but it still not working.... what can i do pls help....
dedoyin said:
hello...
My d410 got stuck at 54% when it was updating and ever since have been trying do it again but it will still stop at 54%... what can i do to revert it and i have tried factory resetting it but it still not working.... what can i do pls help....
Click to expand...
Click to collapse
Are u still facing the issue sorry for late reply i was busy with work
I don't think so those are two completely different variants
Related
Attention, Do On Your Own Risk
I am not responsible if there is any damage to your device
And read this carefully
ONLY FOR LG L7 II P713
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Let's get started it
First, check your software, go to settings> about phone> software information
If you are already using firmware p71310e-ESA-XX
You can directly use the apk below to rooting process
download apk from here
- install apk
- open it, and select the Superuser or SuperSU(Recomended use this)
- Click Gandalf
- Reboot
You have succesfully rooted your device
For non p7130e-ESA-XX user
Follow these instruction
>First, Download all these
1. USB Driver
2. KDZ FW Updater
3. Download Firmware LG L7 with Root support from here
4. Choose THA/THAILAND V10E LGP713
5. Download apk from here
Second, install
1. Usb Driver
2. Extract the KDZ FW Updater, find msxml.msi and instali it
3. Connect the device computer, do not forget to check the USB debugging on, once there select the connection notification, select Software LG
4. Open KDZ update
Choose Type =3GQCT
Phone Mode =DIAG
5.Browse File KDZ that you've download, then click ''Launch Software Update"
6. Find some food until the process is done,
cause It's take a long time, between 15-20 minutes, i'm not kidding
7. Install apk
8. Open it, and select the Superuser or SuperSU(Recomended use this)
9. Click/Choose Gandalf
10. Reboot your device
Finally, You have succesfully rooted your device
Special thanks
@alephzain
for this awesome application
Of course, all of these operations need the right Root User
1. Download and unpack this archive boothack+recovery
2. Install the program Gscript.apk on your phone
3. File boothack-cwm.sh put the path /storage/sdcard0/gscript /
4. APPSSBL.bin and recovery.img files put the path /storage/external_SD/
5. Run a previously installed Gscript
6. Press the softkey menu -> Add Script -> Load File -> boothack-cwm.sh -> save (it is added to the list)
7. Click on the saved script boothack-cwm
8. You're done! (the phone will restart in recovery mode)
Known issues at the moment:
1. The problem with the display. Displayed upside down and while navigating jumps in width. At this point in the stage of searching for a solution. Nevertheless, all necessary functions are performed
Solution for bootloop problem while using CWM
solution is: pull out the battery > plug in to USB or charger if you don't have pc > just let it blinks with LG logo > now put your battery in, you will see the battery icon charged > plug out the cable > then turn it on like usual.... wallaa... you got your phone back to home...
after this, please use kdz flasher to remove cwm recovery ( do not wipe data if you won't )
that's all... cheers
credit goes to
thanks @yayakuya for the solution
Reserved
I want to ask something. Will framaroot 1.7.0 work on 10D ? If not, why not using motochoper instead ?
Sent from my LG-P713 using xda app-developers app
thank ,i was rooted for my p713 .
but i can't install recovery .
karkand said:
I want to ask something. Will framaroot 1.7.0 work on 10D ? If not, why not using motochoper instead ?
Sent from my LG-P713 using xda app-developers app
Click to expand...
Click to collapse
nope, 10d didn't working with all framaroot version, you must change you fw
vananuan said:
thank ,i was rooted for my p713 .
but i can't install recovery .
Click to expand...
Click to collapse
open this thread to install cwm
http://forum.xda-developers.com/showthread.php?t=2277972&page=2
follow the instructions
please note this
the recovery doesn't stable yet, don't blame anyone if there's something wrong later
vananuan said:
thank ,i was rooted for my p713 .
but i can't install recovery .
Click to expand...
Click to collapse
Thx. Now my phone root
Sent from my LG-P713 using xda app-developers app
damn... my p713 was v10a
i hate to play with flasher...
but nvm, thanks for those bro,
can't do oplosan shake before breaking the system
yayakuya said:
damn... my p713 was v10a
i hate to play with flasher...
but nvm, thanks for those bro,
can't do oplosan shake before breaking the system
Click to expand...
Click to collapse
you're welcome brother
just shaking the oplosan dance at the same time while you breaking the system
happy dancing and happy flashing
nasheich said:
you're welcome brother
just shaking the oplosan dance at the same time while you breaking the system
happy dancing and happy flashing
Click to expand...
Click to collapse
oi bro...
why after I pull my sdcard out, my phone just going to bootloop...
I still can go to cwm, but why that's only for few seconds then it just reboot it self???
I can't do restore the backup coz it will be rebooted while in the middle of process...
the worst thing, I can't use kdz flasher coz adb can not read my phone while in bootlooping (actually it's readable, but the bootloop is not stucked... it's round over n over again)
so adb just read for a while coz phone turned off n then restarted again...
did you know which buttons combo for bring it to emergency mode?
thanks
yayakuya said:
oi bro...
why after I pull my sdcard out, my phone just going to bootloop...
I still can go to cwm, but why that's only for few seconds then it just reboot it self???
I can't do restore the backup coz it will be rebooted while in the middle of process...
the worst thing, I can't use kdz flasher coz adb can not read my phone while in bootlooping (actually it's readable, but the bootloop is not stucked... it's round over n over again)
so adb just read for a while coz phone turned off n then restarted again...
did you know which buttons combo for bring it to emergency mode?
thanks
Click to expand...
Click to collapse
1. don't use cwm for now, isn't stable yet
2. like Samsung's device, use combination of home+volume down+power to go emergency mode
3. if the number 2 doesn't work, pull out the battery, connect your device to PC(don't use the battery) and go to emergency mode by holding home+volume down+power as fast as you can
4. now flash the stock rom using kdz updater again(make sure you downloaded that)
sorry for late reply, I'm busy dancing oplosan
nasheich said:
1. don't use cwm for now, isn't stable yet
2. like Samsung's device, use combination of home+volume down+power to go emergency mode
3. if the number 2 doesn't work, pull out the battery, connect your device to PC(don't use the battery) and go to emergency mode by holding home+volume down+power as fast as you can
4. now flash the stock rom using kdz updater again(make sure you downloaded that)
sorry for late reply, I'm busy dancing oplosan
Click to expand...
Click to collapse
thanks mate..
ok, now i'll try it then report to you soon...
___edit__
kdz won't read the emergency mode!
I was trying those three modes in kdz, but phone can't read it.... :$
yayakuya said:
thanks mate..
ok, now i'll try it then report to you soon...
Click to expand...
Click to collapse
you're welcome
yayakuya said:
thanks mate..
ok, now i'll try it then report to you soon...
___edit__
kdz won't read the emergency mode!
I was trying those three modes in kdz, but phone can't read it.... :$
Click to expand...
Click to collapse
make sure you have install the driver first
use driver from the op
nasheich said:
you're welcome
Click to expand...
Click to collapse
how to read the phone in emergency mode?
the LG United driver only read adb....
any suggestion?
yayakuya said:
how to read the phone in emergency mode?
the LG United driver only read adb....
any suggestion?
Click to expand...
Click to collapse
like in the op, just change the "Phone Mode" to "Emergency Mode" at the KDZ Updater
Second, install
1. Usb Driver
2. Extract the KDZ FW Updater, find msxml.msi and
instali it
3. Connect the device computer,
4. Open KDZ update
Choose Type =3GQCT
Phone Mode =DIAG > change to emergency mode
5.Browse File KDZ that you've download, then click
''Launch Software Update"
6. Find some food until the process is done,
nasheich said:
like in the op, just change the "Phone Mode" to "Emergency Mode" at the KDZ Updater
Second, install
1. Usb Driver
2. Extract the KDZ FW Updater, find msxml.msi and
instali it
3. Connect the device computer,
4. Open KDZ update
Choose Type =3GQCT
Phone Mode =DIAG > change to emergency mode
5.Browse File KDZ that you've download, then click
''Launch Software Update"
6. Find some food until the process is done,
Click to expand...
Click to collapse
like I was mentioned above, I did try those three mode "emergency n cs_emergency mode" but still phone not found...
but nevermind, I've got new solution for it by my self....
if you guys having problem after installing cwm n do normal reboot, it will never bring you to the home screen... it's just bootloop...
solution is: pull out the battery > plug in to USB or charger if you don't have pc > just let it blinks with LG logo > now put your battery in, you will see the battery icon charged > plug out the cable > then turn it on like usual.... wallaa... you got your phone back to home...
after this, please use kdz flasher to remove cwm recovery ( do not wipe data if you won't )
that's all... cheers
I'm not using LG L7 anymore, i was changing about 2 months ago
btw, I'll put it at first page if you don't mind
Hello I are trying unbrick my LG L7X but i cant!
when i tried to flash the device, an error appears
[see the image below]
http: //i.imgur.com/AwtLxma.jpg
and the device dont make anything.. the emergency mode screen is still without restart or other thing..
I already download the all firmwares of Mexico (TELCEL) displayed here http ://lg-phone-firmware.com/index.php?id_mod=21 and is not working too, =(
My phone information is:
Model: LGP714
Country: Mexico
Phone Company: TELCEL
______________________________
also when i install a kdz called "V20A_01.kdz" any error appears in the KDZ Updater Tool, the phone restarts after the flash is full but dont working.
The phone is stocked in the LG Logo and dont make anything, i only can enter to the emergency mode again using:vol+ + connecting the USB after.
I really need help, i already go to the "technologhy center" in my country and any body haves a idea of what happens with my phone Lol.
sorry for my bad english,
Anybody can help?
HELP ME =(
my phone its bricked... today
Anyone can help me? please
flomix77 said:
Anyone can help me? please
Click to expand...
Click to collapse
What procedure you use to flash KDZ? Have you try emergency mode in updater? Have you CWM installed on device?
And yes, it is worst scenario when you try to flash rom for other device...
maxx_hr said:
What procedure you use to flash KDZ? Have you try emergency mode in updater? Have you CWM installed on device?
And yes, it is worst scenario when you try to flash rom for other device...
Click to expand...
Click to collapse
I are following these steps:
(when i turn on my phone only the LG logo appears)
1.- Turn Off my Phone
2.- Configure the KDZ Updater settings, Type 3GQCT and mode CS_EMERGENCY (I already tried the all modes)
3.- remove the batery
4.- Connect the USB and press vol+
5.- Now are in emergency mode (windows has detected the device because i already have the LG drivers and PC Suite)
6.- Click on "Launch Software Update"
7.- Wait while the firmware is installing..
i already use a application to found my original (official) firmware from LG page (V10A_09.kdz TCL/TELCEL MEXICO)
But when i tried install this kdz an error appears in the Updater KDZ (in the 14% of progress) and the phone its bricked on emergency mode..
I already tried a lot of differents KDZ Files, V20A_00, V120H_00, and nothing...
How i can do?
flomix77 said:
I are following these steps:
(when i turn on my phone only the LG logo appears)
1.- Turn Off my Phone
2.- Configure the KDZ Updater settings, Type 3GQCT and mode CS_EMERGENCY (I already tried the all modes)
3.- remove the batery
4.- Connect the USB and press vol+
5.- Now are in emergency mode (windows has detected the device because i already have the LG drivers and PC Suite)
6.- Click on "Launch Software Update"
7.- Wait while the firmware is installing..
i already use a application to found my original (official) firmware from LG page (V10A_09.kdz TCL/TELCEL MEXICO)
But when i tried install this kdz an error appears in the Updater KDZ (in the 14% of progress) and the phone its bricked on emergency mode..
I already tried a lot of differents KDZ Files, V20A_00, V120H_00, and nothing...
How i can do?
Click to expand...
Click to collapse
Try this:
1. Download older version of kdz updater: https://www.dropbox.com/s/w8h5t1mqcuclijv/KDZ_FW_UPD_EN.rar
2. unpack it on root of c:
3. Pull out LAN cable, or disable internet connection
4. Run msxml.msi from unpacked kdz_fw_upd_en folder
5.put the KDZ you download previously and be carefull to choose only KDZ FOR YOUR DEVICE on root of C:
6. Turn off the phone, hold the volume "down" and insert the USB cable, should see a yellow background and the words "Emergency mode"
7. Run KDZ_FW_UPD.exe
8. choose parameters 3GQCT and DIAG, select the firmware file (KDZ)
9. Click Launch software update and wait...
10. If update stuck again on some %, (stuck means no progres for long time, like 10-15 min), unplug USB, pull out battery, reinsert and repeat from step 6. If you are lucky, mabe previous flash turns back partition organisation destroyed by flashing firmware for other phones, and second flash finish succesfull. In that case, do factory reset,,
11. good luck
11.
The error appears again
maxx_hr said:
Try this:
1. Download older version of kdz updater:
2. unpack it on root of c:
3. Pull out LAN cable, or disable internet connection
4. Run msxml.msi from unpacked kdz_fw_upd_en folder
5.put the KDZ you download previously and be carefull to choose only KDZ FOR YOUR DEVICE on root of C:
6. Turn off the phone, hold the volume "down" and insert the USB cable, should see a yellow background and the words "Emergency mode"
7. Run KDZ_FW_UPD.exe
8. choose parameters 3GQCT and DIAG, select the firmware file (KDZ)
9. Click Launch software update and wait...
10. If update stuck again on some %, (stuck means no progres for long time, like 10-15 min), unplug USB, pull out battery, reinsert and repeat from step 6. If you are lucky, mabe previous flash turns back partition organisation destroyed by flashing firmware for other phones, and second flash finish succesfull. In that case, do factory reset,,
11. good luck
11.
Click to expand...
Click to collapse
bit.*ｌy/1qp04s5
bit.*ｌy/1lqlfT1
bit.*ｌy/1iKwMC4
(remove * because i cant post links for the images)
The problem persists how i can do?
I can install the firmware V20A_00.kdz but the phone its bricked on the LG logo, and dont work. if i try install other firmwar (V10A_09.kdz) the kdz updater shows a error, T_T
flomix77 said:
bit.*ｌy/1qp04s5
bit.*ｌy/1lqlfT1
bit.*ｌy/1iKwMC4
(remove * because i cant post links for the images)
The problem persists how i can do?
I can install the firmware V20A_00.kdz but the phone its bricked on the LG logo, and dont work. if i try install other firmwar (V10A_09.kdz) the kdz updater shows a error, T_T
Click to expand...
Click to collapse
DONT TRY TO INSTALL OTHER PHONE FIRMWARE (V20A_00.kdz)! Flash only kdz for your model, like V10a_08.kdz, and download it from http://lg-phone-firmware.com/index.php?id_mod=21, in Mexico section.
No known similar firmware is available for your phone!
maxx_hr said:
DONT TRY TO INSTALL OTHER PHONE FIRMWARE (V20A_00.kdz)! Flash only kdz for your model, like V10a_08.kdz, and download it from http://lg-phone-firmware.com/index.php?id_mod=21, in Mexico section.
No known similar firmware is available for your phone!
Click to expand...
Click to collapse
My original phone firmware is V10A_09.kdz and the kdz updater shows a error if i try install it T.T
flomix77 said:
My original phone firmware is V10A_09.kdz and the kdz updater shows a error if i try install it T.T
Click to expand...
Click to collapse
Have you try to install V10A_08.kdz? This is older version of WORKING firmware for your device, just try...
There's no v20 ROM for L7 II until right now while I'm writing this message (and it's just a name that indicates the version for that specific model - e.g. v10 is ICS and v20 is JB in P700, while v10 is JB in P710 - so don't try to compare them in any way).
You simply flashed the wrong firmware, you flashed the firmware of another LG model in your phone, probably a L7 I ROM via KDZ.
The bad news is until today I found no way to fix the phone, see my topic: http://forum.xda-developers.com/showthread.php?t=2743453
OK
On this link (maby) you can find another way to flash KDZ: http://forum.xda-developers.com/showthread.php?p=51612244
Yes, you must change some things to work, but this is the last chance for your device.
And I remember that i was read one similar post before few months, for L7 II, but i can't find it anymore. In that post someone describe how to resolve his bricked phone problem, with link to post where he was find solution how to succesfully flash firmware... this post you cant find in LG L3 II - 5 - 7 II section.
So, just keep trying, and please, share with us what you do. If you dont understand procedure, just ask, and maby I have (or someone else) answer.
Good luck
Hi thanks for the suggestion...
It looks like the phone isn't able to enter Download Mode (required for FlashTool?), because it always turn on in emergency... Or am I doing something wrong? I'm not sure about the key combination for L7 II, I can't find it anywhere...
rafaelluik said:
Hi thanks for the suggestion...
It looks like the phone isn't able to enter Download Mode (required for FlashTool?), because it always turn on in emergency... Or am I doing something wrong? I'm not sure about the key combination for L7 II, I can't find it anywhere...
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showpost.php?p=54044924&postcount=2
maxx_hr said:
Try this: http://forum.xda-developers.com/showpost.php?p=54044924&postcount=2
Click to expand...
Click to collapse
It doesn't work. It goes straight to emergency mode. And those instructions are in a L3 II topic, what if the combination for L7 II is different (involves the hotkey IDK)?
rafaelluik said:
It doesn't work. It goes straight to emergency mode. And those instructions are in a L3 II topic, what if the combination for L7 II is different (involves the hotkey IDK)?
Click to expand...
Click to collapse
I think emergency mode is download mode...
rafaelluik said:
It doesn't work. It goes straight to emergency mode. And those instructions are in a L3 II topic, what if the combination for L7 II is different (involves the hotkey IDK)?
Click to expand...
Click to collapse
maxx_hr said:
I think emergency mode is download mode...
Click to expand...
Click to collapse
flomix77 said:
My original phone firmware is V10A_09.kdz and the kdz updater shows a error if i try install it T.T
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=54504577&postcount=10
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When i want to get in emergency/download mode, on the screen appears this blue stripes.
IGGYVIP i try your guide, but when i want flash KDZ, it is the same result as all. (IP PARAM: 0 etc.)
It is possible, that my phone will ok?
Please help
Hi
I am facing same problem described here.
I flashed wrong rom on my LG P715 and now it is bricked. Before flashing I rooted the device and installed CWM recovery. I am having same blue screen now.
Please help me.
Thank you in advance.
Harish
harishc said:
Hi
I am facing same problem described here.
I flashed wrong rom on my LG P715 and now it is bricked. Before flashing I rooted the device and installed CWM recovery. I am having same blue screen now.
Please help me.
Thank you in advance.
Harish
Click to expand...
Click to collapse
From here do this:
http://forum.xda-developers.com/opt...torial-how-to-achieve-root-p710-l7-2-t2921271
REMOVE ALL DRIVERS OF ANDROID YOU HAVE (Lg Adb all). Reinstall the drivers I provided there and adb. After that just plug usb in and turn phone on. Tell me as what is getting recognized (in device manager).
Hello, i have a question. How to back from 4.4.2 android to 4.1.2 android? i need 4.4.2 no root in my phone. :c Thanks for replies
Hello!
Hello, to revert to Jellybean you need to flash a KDZ file of Jellybean, here you can find it:
http://lg-phone-firmware.com/index.php?id_mod=21 (Every with V10 version is Jellybean, V20 is KitKat)
VERY IMPORTANT!
After installer the Jellybean rom and finish with the flashing, you need to do a hard reset or it wont boot.
Hard reset:
Press Volumen Down - Power Key and Quick memo Key at the same time
When LG logo appear, release the Power Key one
When LG logo disappear, release all the buttoms. It'll appear a Android robot and when it finish, boot.
If u don't know how to flash KDZ ask me!
Hello Juaaanchi,
How to flash KDZ in my phone P710?
Thanks
pjprojekce said:
Hello Juaaanchi,
How to flash KDZ in my phone P710?
Thanks
Click to expand...
Click to collapse
1. Download the .kdz file. I should be named V10A, V20C etc.
2. Install your device drivers.
3. Connect USB wire to PC.
3. Turn off the phone and enter download mode by taking out the battery, pluging in USB while holding VOLUME DOWN button.
4. Open LG update tool (DOWNLOAD HERE) <MODERATOR EDITED - VIRUS / TROJAN LINK REMOVED>
5. Don't change anything, just select your .kdz file.
6. Press start, next, select enlgish and wait.
7. Then your phone should reboot into stock ROM.
That's all. Write if something goes wrong.
i was use this tool, with CSE mode. but when firmware finish extracted, this tool stop responding. in the detail report APP CRASH happened.
i try with NORMAL mode. but when the tool flash my device, in 5% my device disconnect unexpectedly. i've already instal the driver with LG port, modem, and usb device. but that also happened again and again
pjprojekce said:
i was use this tool, with CSE mode. but when firmware finish extracted, this tool stop responding. in the detail report APP CRASH happened.
i try with NORMAL mode. but when the tool flash my device, in 5% my device disconnect unexpectedly. i've already instal the driver with LG port, modem, and usb device. but that also happened again and again
Click to expand...
Click to collapse
Use LGFlashtool in EMERGENCY MODe and 3GCQT, and it will work
Can anyone help me with jelly bean kdz file link?
Thank you.
So I recently bricked my G3 and it was a living hell to unbrick it from the lack of info but I gathered what I could and did it. My G3 is working great now so here's how I did it: (for the record I had no download mode, no recovery, and no system for flashing JasminROM after flashing a 35B bootstack...so don't do that.)
Required Materials:
Bricked G3
Screwdriver
Wire
USB Cable of good quality
PC
Solder (Optional)
Soldering Iron (Optional)
Things required on PC:
Secureboot disabled and test mode enable
Qualcomm USB Drivers (attached)
TOT File
Zip file containing willcracker's tools (attached)
Pics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have drivers installed and tot file ready. Also make sure battery is removed and top cover is removed to expose motherboard.
Steps:
1. Plug in USB cable to PC
2. Connect one end of the wire to ground (or solder it to the ground point as it is much easier to simply hold one wire end)
3. Connect other wire end to the second point from the bottom (see pic)
4. Plug in the USB cable to phone (should hear windows tone for connection within seconds)
5. Release second wire end
6. Check device manager for device, should be Qualcomm 9008 (jot down port #)
7. Open the zip
8. Extract contents to desktop
9. Run Board Diag as admin
10. Select downloaded tot file under Image Extraction (BIN section)
11. Choose an output folder (any folder) we'll call this Folder O
12. Click Extract
13. Choose B2 from first drop menu
14. Choose the correct com port from second drop menu
15. Choose Folder O for Target Dir
16. Check AP CHECK and EMMC Test
17. Hit Start
18. Restore Device should now have drop menu, select aboot and hit start
19. Do the same for: BackupGPT, boot, dbi, laf, PrimaryGPT, recovery, rpm, tz and finally sbl1 (MAKE SURE THIS IS THE LAST ONE FLASHED)
20. Phone should get disconnected
21. Put battery in
22. Power On
23. Flash the complete KDZ using LGFlashTool for a completely clean install. Make sure software versions match.
Credits to @willcracker for files and guide, I just rewrote it and made it much more clear (test point was in the posts under thread and weren't well explained). If you have questions, feel free to ask.
Reserved.
I used This thread and it also worked for the vs985.
I'm about to do this for two different G3s. Will post back results. Both of them are hard bricked.
One G3 is unbricked and I am about to do the other. Thread is perfect. Thanks a lot OP!
THANK YOU, thought I my VS985 for good for spare parts only, but today it has been brought back to life, so Thank you
lg g3 vs985
hi bro... my g3 was hard bricked and i followed this guide and now my phone dosent even show lg logo... it will be just a blank screen with back light..... please help me... please
Ephemera said:
So I recently bricked my G3 and it was a living hell to unbrick it from the lack of info but I gathered what I could and did it. My G3 is working great now so here's how I did it: (for the record I had no download mode, no recovery, and no system for flashing JasminROM after flashing a 35B bootstack...so don't do that.)
Required Materials:
Bricked G3
Screwdriver
Wire
USB Cable of good quality
PC
Solder (Optional)
Soldering Iron (Optional)
Things required on PC:
Secureboot disabled and test mode enable
Qualcomm USB Drivers (attached)
TOT File
Zip file containing willcracker's tools (attached)
Pics:
Have drivers installed and tot file ready. Also make sure battery is removed and top cover is removed to expose motherboard.
Steps:
1. Plug in USB cable to PC
2. Connect one end of the wire to ground (or solder it to the ground point as it is much easier to simply hold one wire end)
3. Connect other wire end to the second point from the bottom (see pic)
4. Plug in the USB cable to phone (should hear windows tone for connection within seconds)
5. Release second wire end
6. Check device manager for device, should be Qualcomm 9008 (jot down port #)
7. Open the zip
8. Extract contents to desktop
9. Run Board Diag as admin
10. Select downloaded tot file under Image Extraction (BIN section)
11. Choose an output folder (any folder) we'll call this Folder O
12. Click Extract
13. Choose B2 from first drop menu
14. Choose the correct com port from second drop menu
15. Choose Folder O for Target Dir
16. Check AP CHECK and EMMC Test
17. Hit Start
18. Restore Device should now have drop menu, select aboot and hit start
19. Do the same for: BackupGPT, boot, dbi, laf, PrimaryGPT, recovery, rpm, tz and finally sbl1 (MAKE SURE THIS IS THE LAST ONE FLASHED)
20. Phone should get disconnected
21. Put battery in
22. Power On
23. Flash the complete KDZ using LGFlashTool for a completely clean install. Make sure software versions match.
Credits to @willcracker for files and guide, I just rewrote it and made it much more clear (test point was in the posts under thread and weren't well explained). If you have questions, feel free to ask.
Click to expand...
Click to collapse
Hey i did this thing for all img... Including system userdata and cache... Now its still the same... When i switch it on it shows lg logo and goes to "Demigod Crash Handler"...... Help please........
I got through step 19, but now I get the LG logo with "Boot Failure" under it and it's stuck in a boot loop. Any idea what I did wrong?
ETA: I was able to get into the Firmware Update mode and use the LG Flash Tool. Thanks for this guide.
Question, after updating from OTA 47a mine started rebooting continually. After trying several options I did a factory reset which took several hours to actually get it done. I set it back up and when signing into a second Gmail account it rebooted again. Did another reset. I got into safe mode, deleted apps like google maps, Gmail, tv, books, etc. Then let It sit over night. It shut off. Now it would only load up to the LG screen or Verizon screen and then shut off. But it seems to get worse cause now I have to pull the battery and sometimes for several minutes. (phone worked perfectly before these updates and never rooted)
I tried to use LG Flash Tool but the phone won't stay in download mode long enough. Sometimes 20 seconds sometimes 5.
So my question is what are my options short of sending it to LG or using as a paper weight.
au5599 said:
Question, after updating from OTA 47a mine started rebooting continually. After trying several options I did a factory reset which took several hours to actually get it done. I set it back up and when signing into a second Gmail account it rebooted again. Did another reset. I got into safe mode, deleted apps like google maps, Gmail, tv, books, etc. Then let It sit over night. It shut off. Now it would only load up to the LG screen or Verizon screen and then shut off. But it seems to get worse cause now I have to pull the battery and sometimes for several minutes. (phone worked perfectly before these updates and never rooted)
I tried to use LG Flash Tool but the phone won't stay in download mode long enough. Sometimes 20 seconds sometimes 5.
So my question is what are my options short of sending it to LG or using as a paper weight.
Click to expand...
Click to collapse
Sadly, I don't know what else to suggest. *If* you had been able to get it to stay in Download mode long enough, I would flash the 10B TOT. TOTs flash more things than KDZs, so sometimes flashing a TOT will solve a problem when flashing a KDZ doesn't (I've personally had that experience). Flashing KDZs after flashing the TOT is fine.
If there's some way to force it to go into QHSUSB_BULK 9008 mode (I haven't looked at the first post in a while, so maybe that's what they're referring to), then there's a third option, which you'd have to Google that term to find the recovery directions using different drivers and a different program. It would show up as QHSUSB_BULK 9008 in Windows' Device Manager - I believe in the Ports section, but possibly in the Modem section.
On the upside, I had the absolute best experience with LG for a repair, but that was my tablet under warranty - no idea if the experience differs if you're out of warranty.
au5599 said:
Question, after updating from OTA 47a mine started rebooting continually. After trying several options I did a factory reset which took several hours to actually get it done. I set it back up and when signing into a second Gmail account it rebooted again. Did another reset. I got into safe mode, deleted apps like google maps, Gmail, tv, books, etc. Then let It sit over night. It shut off. Now it would only load up to the LG screen or Verizon screen and then shut off. But it seems to get worse cause now I have to pull the battery and sometimes for several minutes. (phone worked perfectly before these updates and never rooted)
I tried to use LG Flash Tool but the phone won't stay in download mode long enough. Sometimes 20 seconds sometimes 5.
So my question is what are my options short of sending it to LG or using as a paper weight.
Click to expand...
Click to collapse
I'm having this exact issue. Any luck fixing the issue?
After going back and forth with verizon I got down to 2 options. Send to LG and pay for repairs or take Verizon's offer of early upgrade on device payments. I got that offer thru chat. I told the girl if she wasn't tech support to let me know how to get one. She said she was so I told her to let me explain everything first. Then she said short of sending it to LG I did everything. So then she gave me that offer.
I'm not happy about it but had to do something.
I got the LG G5 and like it but hate it. This only seems to charge to 90% over night then stops charging. I have only got it to charge to 100% maybe 4 times total in the 11 days I have had it.
Ephemera said:
So I recently bricked my G3 and it was a living hell to unbrick it from the lack of info but I gathered what I could and did it. My G3 is working great now so here's how I did it: (for the record I had no download mode, no recovery, and no system for flashing JasminROM after flashing a 35B bootstack...so don't do that.)
Required Materials:
Bricked G3
Screwdriver
Wire
USB Cable of good quality
PC
Solder (Optional)
Soldering Iron (Optional)
Things required on PC:
Secureboot disabled and test mode enable
Qualcomm USB Drivers (attached)
TOT File
Zip file containing willcracker's tools (attached)
Pics:
Have drivers installed and tot file ready. Also make sure battery is removed and top cover is removed to expose motherboard.
Steps:
1. Plug in USB cable to PC
2. Connect one end of the wire to ground (or solder it to the ground point as it is much easier to simply hold one wire end)
3. Connect other wire end to the second point from the bottom (see pic)
4. Plug in the USB cable to phone (should hear windows tone for connection within seconds)
5. Release second wire end
6. Check device manager for device, should be Qualcomm 9008 (jot down port #)
7. Open the zip
8. Extract contents to desktop
9. Run Board Diag as admin
10. Select downloaded tot file under Image Extraction (BIN section)
11. Choose an output folder (any folder) we'll call this Folder O
12. Click Extract
13. Choose B2 from first drop menu
14. Choose the correct com port from second drop menu
15. Choose Folder O for Target Dir
16. Check AP CHECK and EMMC Test
17. Hit Start
18. Restore Device should now have drop menu, select aboot and hit start
19. Do the same for: BackupGPT, boot, dbi, laf, PrimaryGPT, recovery, rpm, tz and finally sbl1 (MAKE SURE THIS IS THE LAST ONE FLASHED)
20. Phone should get disconnected
21. Put battery in
22. Power On
23. Flash the complete KDZ using LGFlashTool for a completely clean install. Make sure software versions match.
Credits to @willcracker for files and guide, I just rewrote it and made it much more clear (test point was in the posts under thread and weren't well explained). If you have questions, feel free to ask.
Click to expand...
Click to collapse
my motherboard has a heat-sink.. is this removable? I'm assuming thats what it is
roirraW "edor" ehT said:
Sadly, I don't know what else to suggest. *If* you had been able to get it to stay in Download mode long enough, I would flash the 10B TOT. TOTs flash more things than KDZs, so sometimes flashing a TOT will solve a problem when flashing a KDZ doesn't (I've personally had that experience). Flashing KDZs after flashing the TOT is fine.
If there's some way to force it to go into QHSUSB_BULK 9008 mode (I haven't looked at the first post in a while, so maybe that's what they're referring to), then there's a third option, which you'd have to Google that term to find the recovery directions using different drivers and a different program. It would show up as QHSUSB_BULK 9008 in Windows' Device Manager - I believe in the Ports section, but possibly in the Modem section.
On the upside, I had the absolute best experience with LG for a repair, but that was my tablet under warranty - no idea if the experience differs if you're out of warranty.
Click to expand...
Click to collapse
Forcing it into download mode is basically the whole guide.
D3MOL1SH1 said:
my motherboard has a heat-sink.. is this removable? I'm assuming thats what it is
Click to expand...
Click to collapse
Yes
Ephemera said:
Forcing it into download mode is basically the whole guide.
Yes
Click to expand...
Click to collapse
thank you for the response, i've searched the forums and google searched for a solution to removing the heat-sink, but with no luck. any help at all with this would be greatly apreciated
D3MOL1SH1 said:
thank you for the response, i've searched the forums and google searched for a solution to removing the heat-sink, but with no luck. any help at all with this would be greatly apreciated
Click to expand...
Click to collapse
It just pops right with a flat head or a pry tool.
When I extract the tot with BoardDiag, everything goes swimmingly, but when I try to start eh AP check and EMMC test, it says "There is no partition file (rawprogram0.xml)."
Any clue as to how to fix it?
Punchieo said:
When I extract the tot with BoardDiag, everything goes swimmingly, but when I try to start eh AP check and EMMC test, it says "There is no partition file (rawprogram0.xml)."
Any clue as to how to fix it?
Click to expand...
Click to collapse
Can you verify if where BoardDiag extracted the partitions from the TOT that the "rawprogram0.xml" files actually does exist or doesn't? It creates some partition file (can't recall if that's the correct name) when it extracts the TOT. I assume that's the same name as the one it creates.
(for the record I had no download mode, no recovery, and no system for flashing JasminROM after flashing a 35B bootstack...so don't do that.)
Click to expand...
Click to collapse
By saying that you had no download mode, did you mean that the screen was black when you attempted to go into download mode? Or did you mean that you tried using the LG Flash Tool with no success? I was in the same situation as you were (flashing Jasmine Rom on the 35b bootstrap and getting a black screen even when the device was powered on) and I didn't want to unscrew the phone to get into the motherboard. Luckily, I was able to unbrick using the "downgrade to 10b method" by @LASERWOLF452 which I will link. So I attempted to get into the download mode, but the screen was black. However, my phone was recognized as the "LGE Mobile For VZW" in the device manager. From here, I was able to follow the downgrade guide, and while the screen stayed black for the entire process, the display miraculously showed the LG logo at the "waiting for reset" part of the flash tool at around 85%. Then everything went as usual, with me only having to do the battery pull when the screen displayed "factory reset status 3". Upon turning the phone back on, it booted normally into the setup wizard. However, the flash tool took a very long time to finish up, taking 1277 seconds instead of the usual 150-180 second time.
Tl;dr: Tried putting your LG G3 into download mode only to get a screen that shows absolutely nothing? If your device is properly recognized by your device manager as "LGE Mobile For VZW", then your download mode should still be working and you can follow the steps for the downgrade method to get your phone back up and running.
Link to the video: https://www.youtube.com/watch?v=zgA0fBkvYdY
Disclaimer!
1). I am not responsible for any damage caused to your device!
2). Your warranty will be void with this tutorial!
3). This is not my work!
4). This will wipe all files and data in your device!
5). Make sure to make a backup first
This is a tutorial on how to Root, Install TWRP Custom Recovery and Install Lineage OS 14.1 Custom Rom for LG SPIRIT H420/H422 ONLY
Things you need:
LG United mobile drivers: https://lg-united-mobile-driver.en.lo4d.com/
Custom Uboot.img: https://drive.google.com/file/d/0B_UKqVTCg2_xU19xeXdaLV92VDQ/view
Custom Recovery TWRP_3.0_LG_Spirit_H422_eng.zip Image: https://yadi.sk/d/NafiUEf1ocWPy
LG Stock Lollipop firmware (Choose the firmware for your device model!)
A. LG H420 lollipop firmware .kdz : https://lg-kdz-firmware.com/download-LGH420-DEU-GERMANY-V10D/12665.html
B. LG H422 lollipop firmware .kdz : https://lg-firmwares.com/downloads/downloader.php?fileid=7321&hash=b134d931d5941b0b2441dfb456f3e4f2
LG flash tool (2014) : http://www.mediafire.com/download/fwrcd3pdj0svjtb/LG_Flash_Tool_2014.zip
ADB and Fastboot ZIP and Drivers: ZIP:https://www14.zippyshare.com/v/ufYG71o0/file.html - Drivers:https://forum.xda-developers.com/attachment.php?attachmentid=1764898&d=1361948659
Custom ROM Lineage OS 14.1: https://drive.google.com/file/d/1kJ1kgKrcH-xhWTnPGAOLXBgP3-Qk9V9s/view
Open Gapps ZIP: https://opengapps.org/
Let's Start!
Part 1: Preperations!
1.Start by unziping the LG Flash Tool zip file in your desktop.
2.Move your downloaded LG Lollipop Firmware File in the LG Flash Tool folder. Install the LG United Mobile Driver you downloaded earlier.
3.Now go to your phone settings and perform a factory reset. Wait until your phone reboot in the setup wizard and turn it off by taking out the battery.
4.With your phone turned off take your usb cable, Connect the USB-A side of the cable to your PC. Hold down the Volume Up Button in your phone and connect the micro usb to your phone as you hold the Volume Up button, until it boot in Firmware Update mode.
5.Navigate to Device Manager in your PC. Check for LGE Mobile Usb Serial Port in the COM&LPT Ports Section as shown in the image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6.Right click on the LGE Mobile USB Serial Port and select Properties.Navigate to Port Settings section and click Advanced.
7.Go to the lower Left part of the window and change the COM number to COM20 and click OK.
Now Starts the Fun Part!
Part 2: Lollipop Downgrade!
A.Launch the LG Flash Tool with Administrator Permissions.
B. The Program should look like this:
C.Click the Folder icon and Select your downloaded KDZ file. Now Select the Normal Flash option. A window will appear. On the lower right select Start. An other window will appear. There Choose your Country and Language and click OK. Wait for the Flash process to complete.
D.Once it completes Setup your Phone as Usual.
E.When the setup is complete install KingRoot and root your phone.
F.When you have Root access launch the Google Playstore and install the Android Terminal Emulator. Also install the Mobileuncle MTK Tools App.
G.Now connect again your Phone to the PC.
Part 3: TWRP Custom Recovey Installation!
H.Unzip the TWRP_3.0_LG_Spirit_H422_eng.zip and uboot+Spirit+H422+v10d+patched.zip. Copy the TWRP Image and Uboot.img in your Phone's Internal Storage.
I.Launch the Mobileuncle MTK Tools and give it root access. Select 'Update Recovery', Select the TWRP.img and flash it. When the flash progress complete, it will ask you to reboot your phone. Click Cancel!!
J.Close the App and Open the Android Terminal Emulator. Type "su" and Allow Root access. Be careful with the next command. If you type it wrong it may brick your device!!!!!!!!!
K.Type : dd if=/sdcard/uboot.img of=/dev/uboot (This command will only work if you copy the uboot.img in the internal storage on your phone not in other folders!)
L.Wait until it finish copying data. Once it complete go to Settings>About Phone>Software Info and Tap the Build Number repeatedly until it say that you are a Developer. Now go back and a new menu will appear in Settings named 'Developer Options'. Click on it. A warning will appear. Click OK and scroll down until you see the option 'USB Debugging'. Enable it.
M.Connect your Phone with your Computer. In your Desktop Unzip the Androidtools.zip. Install the adb drivers. Open a Command Prompt and Type : cd (Drag and Drop the android tools folder and hit enter)
N.After that (Make sure you have you Phone Connected with USB Debugging Enabled!) Type: 'adb devices'. A device code must appear like this picture:
O.Now type: 'adb reboot recovery' .Your device should reboot in TWRP recovery mode. (If not you may have done some steps wrong. Try to flash again).
Part 4: Lineage OS 14.1 and Gapps Installation!
P.Once you boot in Recovery Mode you will be greeted with a Warning Screen. To contiune Slide to Allow Modifications. Select reboot and then system. When your device boot up, connect it to your Computer and Copy the Lineage OS.zip and Gapps.zip to the Internal Storage of your device(if your device isn't recognized by your PC go to Settings and Disable USB Debugging. Once your files are copied re-enable USB Debugging).
Q.Now repeat the previous steps(M-O) to boot in recovery. When you Boot in Recovery Mode Press Wipe<Advanced Wipe, select the boxes as shown and Slide to Wipe
Now is the Crucial Part!
R.Go back and select Install option. Navigate to the Lineage OS.zip file.Before you Flash click *add more zips* and navigate to the Gapps.zip. Now slide to flash and wait to complete. When the flash is complete reboot to system. Be patient because the first boot will last a long time.
Congrats you have installed Lineage OS 14.1 on LG SPIRIT H420!
I hope this Tutorial helped you. Coment to tell me your Opinion about this Tutorial. I'm a newbie so don't hesitate to correct me in some form.Thank's
The file has removed, plz upload again. Sorry for my english
Info?
bruno349 said:
The file has removed, plz upload again. Sorry for my english
Click to expand...
Click to collapse
Thanks for your message. Please I need more info about your requested file, phone etc.
KostasDgr said:
Thanks for your message. Please I need more info about your requested file, phone etc.
Click to expand...
Click to collapse
Is the Lineage OS 14.1 rom for the LG Spirit H422
Fixed link!
bruno349 said:
Is the Lineage OS 14.1 rom for the LG Spirit H422
Click to expand...
Click to collapse
I have just replaced the link of the lineage os with a new working from google drive.
Could you point out where that LineageOS ROM is coming from or was this created by you?
Looking for a working LineageOS version for an LG H420. (H422 should be the same hardware judging from reading through most ROM threads so far)
The ADB drivers on zippyshare are gone: https://www14.zippyshare.com/v/ufYG71o0/file.html
.
Copro said:
Could you point out where that LineageOS ROM is coming from or was this created by you?
Looking for a working LineageOS version for an LG H420. (H422 should be the same hardware judging from reading through most ROM threads so far)
Click to expand...
Click to collapse
this rom comes from 4panda which is a russian forum. This is not my work. recently the rom download link from the thread was deleted and I reuploaded the rom with google drive.
Also we working on it building our own rom. If you want you can wait and download it
Bro ,whatsapp not work , have solution? Please, update ou anything
Whatsapp stay frezee on "initializing"
KostasDgr said:
Disclaimer!
1). I am not responsible for any damage caused to your device!
2). Your warranty will be void with this tutorial!
3). This is not my work!
4). This will wipe all files and data in your device!
5). Make sure to make a backup first
This is a tutorial on how to Root, Install TWRP Custom Recovery and Install Lineage OS 14.1 Custom Rom for LG SPIRIT H420/H422 ONLY
Things you need:
LG United mobile drivers: https://lg-united-mobile-driver.en.lo4d.com/
Custom Uboot.img: https://drive.google.com/file/d/0B_UKqVTCg2_xU19xeXdaLV92VDQ/view
Custom Recovery TWRP_3.0_LG_Spirit_H422_eng.zip Image: https://yadi.sk/d/NafiUEf1ocWPy
LG Stock Lollipop firmware (Choose the firmware for your device model!)
A. LG H420 lollipop firmware .kdz : https://lg-kdz-firmware.com/download-LGH420-DEU-GERMANY-V10D/12665.html
B. LG H422 lollipop firmware .kdz : https://lg-firmwares.com/downloads/downloader.php?fileid=7321&hash=b134d931d5941b0b2441dfb456f3e4f2
LG flash tool (2014) : http://www.mediafire.com/download/fwrcd3pdj0svjtb/LG_Flash_Tool_2014.zip
ADB and Fastboot ZIP and Drivers: ZIP:https://www14.zippyshare.com/v/ufYG71o0/file.html - Drivers:https://forum.xda-developers.com/attachment.php?attachmentid=1764898&d=1361948659
Custom ROM Lineage OS 14.1: https://drive.google.com/file/d/1kJ1kgKrcH-xhWTnPGAOLXBgP3-Qk9V9s/view
Open Gapps ZIP: https://opengapps.org/
Let's Start!
Part 1: Preperations!
1.Start by unziping the LG Flash Tool zip file in your desktop.
2.Move your downloaded LG Lollipop Firmware File in the LG Flash Tool folder. Install the LG United Mobile Driver you downloaded earlier.
3.Now go to your phone settings and perform a factory reset. Wait until your phone reboot in the setup wizard and turn it off by taking out the battery.
4.With your phone turned off take your usb cable, Connect the USB-A side of the cable to your PC. Hold down the Volume Up Button in your phone and connect the micro usb to your phone as you hold the Volume Up button, until it boot in Firmware Update mode.
5.Navigate to Device Manager in your PC. Check for LGE Mobile Usb Serial Port in the COM&LPT Ports Section as shown in the image
6.Right click on the LGE Mobile USB Serial Port and select Properties.Navigate to Port Settings section and click Advanced.
7.Go to the lower Left part of the window and change the COM number to COM20 and click OK.
Now Starts the Fun Part!
Part 2: Lollipop Downgrade!
A.Launch the LG Flash Tool with Administrator Permissions.
B. The Program should look like this:
C.Click the Folder icon and Select your downloaded KDZ file. Now Select the Normal Flash option. A window will appear. On the lower right select Start. An other window will appear. There Choose your Country and Language and click OK. Wait for the Flash process to complete.
D.Once it completes Setup your Phone as Usual.
E.When the setup is complete install KingRoot and root your phone.
F.When you have Root access launch the Google Playstore and install the Android Terminal Emulator. Also install the Mobileuncle MTK Tools App.
G.Now connect again your Phone to the PC.
Part 3: TWRP Custom Recovey Installation!
H.Unzip the TWRP_3.0_LG_Spirit_H422_eng.zip and uboot+Spirit+H422+v10d+patched.zip. Copy the TWRP Image and Uboot.img in your Phone's Internal Storage.
I.Launch the Mobileuncle MTK Tools and give it root access. Select 'Update Recovery', Select the TWRP.img and flash it. When the flash progress complete, it will ask you to reboot your phone. Click Cancel!!
J.Close the App and Open the Android Terminal Emulator. Type "su" and Allow Root access. Be careful with the next command. If you type it wrong it may brick your device!!!!!!!!!
K.Type : dd if=/sdcard/uboot.img of=/dev/uboot (This command will only work if you copy the uboot.img in the internal storage on your phone not in other folders!)
L.Wait until it finish copying data. Once it complete go to Settings>About Phone>Software Info and Tap the Build Number repeatedly until it say that you are a Developer. Now go back and a new menu will appear in Settings named 'Developer Options'. Click on it. A warning will appear. Click OK and scroll down until you see the option 'USB Debugging'. Enable it.
M.Connect your Phone with your Computer. In your Desktop Unzip the Androidtools.zip. Install the adb drivers. Open a Command Prompt and Type : cd (Drag and Drop the android tools folder and hit enter)
N.After that (Make sure you have you Phone Connected with USB Debugging Enabled!) Type: 'adb devices'. A device code must appear like this picture:
O.Now type: 'adb reboot recovery' .Your device should reboot in TWRP recovery mode. (If not you may have done some steps wrong. Try to flash again).
Part 4: Lineage OS 14.1 and Gapps Installation!
P.Once you boot in Recovery Mode you will be greeted with a Warning Screen. To contiune Slide to Allow Modifications. Select reboot and then system. When your device boot up, connect it to your Computer and Copy the Lineage OS.zip and Gapps.zip to the Internal Storage of your device(if your device isn't recognized by your PC go to Settings and Disable USB Debugging. Once your files are copied re-enable USB Debugging).
Q.Now repeat the previous steps(M-O) to boot in recovery. When you Boot in Recovery Mode Press Wipe<Advanced Wipe, select the boxes as shown and Slide to Wipe
Now is the Crucial Part!
R.Go back and select Install option. Navigate to the Lineage OS.zip file.Before you Flash click *add more zips* and navigate to the Gapps.zip. Now slide to flash and wait to complete. When the flash is complete reboot to system. Be patient because the first boot will last a long time.
Congrats you have installed Lineage OS 14.1 on LG SPIRIT H420!
I hope this Tutorial helped you. Coment to tell me your Opinion about this Tutorial. I'm a newbie so don't hesitate to correct me in some form.Thank's
Click to expand...
Click to collapse
Hi, it seems that Custom Uboot.img: https://drive.google.com/file/d/0B_UKqVTCg2_xU19xeXdaLV92VDQ/view is no longer available to download