Related
I Backup-ed my Acer tab b1-A71 using android system recovery - Just like CWM.
The file name ends with .Backup, and i wanted to extract some files from it..
How to Extract data from .Backup file ? - Created with android system recovery
looking for the same
reena0307 said:
I Backup-ed my Acer tab b1-A71 using android system recovery - Just like CWM.
The file name ends with .Backup, and i wanted to extract some files from it..
How to Extract data from .Backup file ? - Created with android system recovery
Click to expand...
Click to collapse
me too looking for the same thing ..how to extract from or decompile .backup file which we get thru recovery.
hi loverboyritesh :: i and you are in same position.. but some advaaanced users are here that we are telling rumors and lies.. dont worry bro.. even i'm trying to get solution.. will tel you after geeing one.. Still no one can tell me hoe to extract .BACKUP file..
same
i am looking for how to reinstall .backup myself so i can have my original rom install.
but i have notice my .backup is 700+mb while custom rom is 200+mb
do you know how to?
reena0307 said:
I Backup-ed my Acer tab b1-A71 using android system recovery - Just like CWM.
The file name ends with .Backup, and i wanted to extract some files from it..
How to Extract data from .Backup file ? - Created with android system recovery
Click to expand...
Click to collapse
same here. dunno how to open and extract the files from a .backup file. hoping you know already
siiingkeeet said:
same here. dunno how to open and extract the files from a .backup file. hoping you know already
Click to expand...
Click to collapse
Nope.. Still i'm having that file but no one knew
reena0307 said:
Nope.. Still i'm having that file but no one knew
Click to expand...
Click to collapse
been searching for 5 days now :<
not a single answer found on google and forums
cant even post a new thread yet. just joined
hope someone will drop by this thread
still no solution?
got same problem here
Got a bootloop issue with an ASUS MeMo Pad 7 HD and I've booted in recovery <3e> to make a backup.
I've got a userdata_YYYYMMDD_HHMMSS.backup. I tried opening it with a bunch of tools like unyaffs, abe (Android backup extractor), going live on the file using linux tools (open as 7zip, zip, rar, tar, tar.gz, gz, bz2 , mount as iso, ext4 and so on....)
Still no luck :-/
Only clue is that the file seems compressed. During the backup under recovery, it told me 3600MB to backup and the file userdata_xxxxxxxx_xxxxxx.backup show only 2.61GB
I did this backup 3 time to ensure there were no corruption during the write process from the pad and did again the same "tests" to open the file...Not better.
If any dev' have any clue of the file format, I'd be glad to help
It doesn't seem to be a valid unix img file. Tried mounting it to no avail. When it's restored by the recovery it also extracts the individual files because i fails on one in my case and stops the entire restore... I tried unzipping it, changed extension to ,jar, .tar, .zip, etc., none of them are recognised...amazing for a standard android feature to find so little info about it
Any solution?
I called Alcatel's technical service today and they told me that you can use the backup file only from the phone. Mine gives me the following error when I try to restore it: Error Magic header
If anyone knows how to unpack the backup file I would be more than grateful.
It's a 512 byte header in front of a "tar.gz"
hexdump -C userdata_xxxxxxxx_yyyyyy.backup | less​showed the magical zip header "1f8b0800 00000000" at offset 0x200
So, skipping 512 bytes, the rest can be gunzip | tar
dd if=userdata_xxxxxxxx_yyyyyy.backup bs=512 skip=1 | gunzip -c | tar xv​
Sir ektoric what d u mean on ur post?
Sorry cant understand it..
Can u please d a step by step procedure? Please...pls...plss
Thanks in advance...
Steps?
@ektoric sir im a noob in this... Can u show a step by step procedure?
@killen00 sorry, I assume you have a linux machine (or have access to one). The command is actually all there is to it.
Code:
dd if=userdata_xxxxxxxx_yyyyyy.backup bs=512 skip=1 | gunzip -c | tar xv
If you don't have a linux machine available, might I suggest one of the many distros of your choice, most of which have LiveCDs which you can run without installing.
script for gunzip method
maybe on xda it is common sense, but for me it was necessary to know, that these stock android recovery extracted files can be restored with nandroid custom recovery, if you simply repack them into tar archive.
i put this two command lines in a dirty shell script (extract + repack as tar).
thanks to ektoric figuring out his gunzip method!
edit: notamamasboy's mount method added (but not tested yet). if script not works come back few days later, download again and check version, maybe it has changed meanwhile.
with this you're able to transfer data of non-rooted phone to (rooted) similar one.
this is useful in case touchscreen is broken, you haven't custom recovery installed, usb-debugging is disabled and connecting usb-otg-mouse doesn't work.
tested on my Archos 50 b Oxygen (Mediatek MT6582).
it works for me, feel free to improve, port to busybox and publish. no support. use at own risk.
edit: bckp2cwm.sh is deprecated it is FOR JELLY BEAN ONLY (no selinux support)
a newer (selinux) version bckp2win.sh for TWRP you can find here:
http://forum.xda-developers.com/showthread.php?t=3775129
How did you go about determining the magic number found at 0x200? My hexdump output does not have that magic number (1f 8b) in any instance. Leads me to believe my backup is not a tar file. Any suggestions then?
@notamamasboy, you are unfortunately correct.
Someone else also mentioned that their
Code:
userdata_xxxxxxxx_yyyyyy.backup
file was not of the same format I tried some "known magic headers", and could not find anything tell-tale. In which case, without some clues, you are back at square one.
ektoric said:
@notamamasboy, you are unfortunately correct.
Someone else also mentioned that their
Code:
userdata_xxxxxxxx_yyyyyy.backup
file was not of the same format I tried some "known magic headers", and could not find anything tell-tale. In which case, without some clues, you are back at square one.
Click to expand...
Click to collapse
Even more peculiarly, two backups were created a .backup and a .backup2, I wonder if combining with cat I can get somewhere...
Hi, I have new Prestigio tablet PMT5777_3G and I want to modify it's default ROM. I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=1801690. I successfully extracted system folder, but I have no idea how to create updater-script for this specific ROM. If I understand correctly I need to get updater-script from original ROM.
I've got something that resembles original ROM, but it's folder structure is completely different from what I would expect.
I would expect:
META-INF
system
boot.img
I've got:
APDB_MT6582_S01_MAIN2.1_W10.24
boot-sign.img
BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V12_P4_1_wg_n
cache-sign.img
Checksum.ini
EBR1-sign
lk-sign.bin
logo-sign.bin
MBR-sign
MT6582_Android_scatter.txt
preloader_htt82_tb_jb5.bin
recovery-sign.img
secro-sign.img
system-sign.img
sro-lock-sign.img
sro-unlock-sign.img
userdata-sign.img
I'm an android developer, but have no experience with custom ROM's and now am in a situation, where I want to get that custom ROM up and running, but am unable, because I can't figure out how to create updater-script or extract it from files that I currently have. It would be great if someone could point me to the right direction of what to do next.
Thanks
P. S. It seems it's against the rules to ask questions here, but I can't seem to find where else to ask this on xda
Dantenas said:
Hi, I have new Prestigio tablet PMT5777_3G and I want to modify it's default ROM. I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=1801690. I successfully extracted system folder, but I have no idea how to create updater-script for this specific ROM. If I understand correctly I need to get updater-script from original ROM.
I've got something that resembles original ROM, but it's folder structure is completely different from what I would expect.
I would expect:
META-INF
system
boot.img
I've got:
APDB_MT6582_S01_MAIN2.1_W10.24
boot-sign.img
BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V12_P4_1_wg_n
cache-sign.img
Checksum.ini
EBR1-sign
lk-sign.bin
logo-sign.bin
MBR-sign
MT6582_Android_scatter.txt
preloader_htt82_tb_jb5.bin
recovery-sign.img
secro-sign.img
system-sign.img
sro-lock-sign.img
sro-unlock-sign.img
userdata-sign.img
I'm an android developer, but have no experience with custom ROM's and now am in a situation, where I want to get that custom ROM up and running, but am unable, because I can't figure out how to create updater-script or extract it from files that I currently have. It would be great if someone could point me to the right direction of what to do next.
Thanks
P. S. It seems it's against the rules to ask questions here, but I can't seem to find where else to ask this on xda
Click to expand...
Click to collapse
Since you are a beginner to ROM development, I would recommend the use of dsixda's Android kitchen, which you probably have downloaded already. If not use this link
http://forum.xda-developers.com/showthread.php?t=633246
Follow these steps to obtain the file structure and Meta-Inf folder for your custom rom.
1. Open the folder where you have placed the kitchen.
2. You will find a folder called original_update.
3. Open that folder and copy your boot.img and system.img files into it. ( In your case it is boot-sign.img and system-sign.img. Rename those files into boot.img and system.img and place them in the folder )
4. Now open the kitchen. ( Refer the above link to know how to do it )
5. You will find " 1. Set up working folder from ROM " option under Main Menu.
6. Type 1 and you will be directed to another menu. Click Enter.
7. Select your boot.img and system.img from the menu.
8. Now follow the instructions that appear on the screen.
9. When you successfully complete the steps, you will have the required Working folder, with boot.img, system folder and Meta-Inf folder, which will contain the updater-script (It will be automatically generated)
All the best. :good:
Hit Thanks if this helped you... PM me if you need further help or search the forum for detailed instructions.
Thanks, this helped me, but I still can't create ROM.
I encountered a problem with kitchen:
Code:
Available ROMs:
(1) system.img and boot.img
Enter selection number (default=1, cancel=0, r=refresh):
Found original_update/system.img
Found original_update/boot.img
The new working folder will be named WORKING_061614_070841
Change the name (y/n)? (default: n):
Creating working folder WORKING_061614_070841 ...
Copying boot.img ...
Copying system.img ...
Adding an update-script ...
NON-YAFFS/NON-TAR FILE FORMAT DETECTED IN ROM
Mounting system.img to loopback device and then extracting files ...
Error: Unable to mount system.img
Error: No /system/framework folder found!
Press Enter to continue
This creates my missing update-script and boot.img, but system folder is empty.
Would it be a good idea to extract all system files from device and attempt to create ROM with them, and this update-script, or is there something I could do with system.img to make it extract?
Try this
Don't worry. There's always an alternative. Try this simple method.
1. Boot into CWM (Clockwork Mod) Recovery. (I'm pretty sure you know how to do it, if not, you can feel free to search the forum)
2. Choose Backup and Restore.
3. Make a backup in your external sdcard.
4. Now boot normally, open your external sdcard. You will find a folder called clockworkmod. Copy that folder to your PC.
5. Inside that folder, you will find the backup.
6. Now, copy boot.img and system.ext4.tar.a to your original_update folder of the kitchen.
7. Warning! Do not copy system.ext4.tar, only copy system.ext4.tar.a
8. Once you have copied these two files, rename system.ext4.tar.a into system.ext4.tar
9. Now, open android kitchen and follow the exact same steps as you did before.
10. When you choose the available rom, you will find the screen as below.
Code:
Available Roms:
(1) system.ext4.tar and boot.img
11. Choose it and follow the instructions. You will have your required working folder.
Try this and let me know if you still face any issues. :good:
I was unable to load CWM recovery, because it is not supported by my device. I tried TWRP too, which also doesn't support my device. Is it possible to do without CWM?
Dantenas said:
I was unable to load CWM recovery, because it is not supported by my device. I tried TWRP too, which also doesn't support my device. Is it possible to do without CWM?
Click to expand...
Click to collapse
I'm sorry my friend, even if you create your own ROM, you require either one of them to flash the ROM to your device. Seeing you so keen on developing the rom, try to use any yaffs tool to create your system.img from extracted system folder. You may refer this thread.
http://forum.xda-developers.com/showthread.php?t=1645412
Dear Admins,
Could we get a forum setup for the Cube U27GT WiFi version? I dug around on the site a bit beforehand but didn't see one, I apologize if I missed it and please direct me there if I did.
I have this tablet and I am doing some initial basic firmware development for it and want a proper place to start putting threads.
Dear Dev Community,
I can't root this bloody thing... At least, not the rom itself. Let me explain...
I can flash the stock rom from Cube and that can be rooted using Kango Root. --Fine...
However, I can't figure out how to replicate this when I make my own rom.
Thus far, here is what I have attempted...
1. Setup dsixda's excellent kitchen on my Ubuntu workstation.
2. Unpack the rom, clean things up, manually put the boot image into the dsixda unpacked working rom folder, run dsixda's root functionality (which add SU binary to xbin and SuperSu apk file to app folder as well as do some things with the boot image file).
3. Rather than using repack with Dsixda (which makes an update.zip image which I can't use because the stock recovery environment on this device can't flash zip update files and I can't for the life of me figure out how to get and or make a working CWM or TWRP recovery image for this unit)...
4. What I do is I run commands in linux to unpack the stock rom to another directory and mount that directory, then clear out a bunch of folders and then manually copy in my files from dsixda's working folder, then repackage up my unpacked stock rom into a new system.img file.
5. Then copy my now modified boot image, system image, and also userdata image (I modify that as well as that is where most all of the chinese bloatware is loaded from) to my SP_Flash_Tool, generate new checksum.ini file and flash normally...
What I get as a result...
1. As long as I am really careful with how I copy files into my new image, the new system flashes okay (if I am not careful, after flash USB storage for some reason has a format error and the system will boot but can't mount USB storage and other odd issues ensue as a result).
2. Assuming everything flashes okay, and no issue with USB storage partition, I have SuperSU installed and when I go to use an app (ES File Explorer or Root Checker) that require's root, I do get the prompt. However none of the root functions actually work and Root Checker tells me I am not rooted.
That is as far as I have got. So as a result, I have a really nice, westernized, cleaned up rom but with no root.
Anyone have any ideas?
This is my first adventure into mod'ing MTK roms so I am sure I am doing all kinds of things wrong . I had a good bit of experience on Rockchip SoC's before this though.
Kind regards and thanks in advance!
Roman
Figured it out!
So I finally did the following rather hackish work-around...
1. Flash stock firmware...
2. Root with Kingo Root
3. Enabled ADB
4. Attach to PC and fire up MTK Droid Tools
5. Take a full backup
6. Modify the system image from the backup and make changes
7. Put that in new firmware flash package
8. Flash new firmware
YAY - Cleaned up rom, modified, with root!
Once I get it all packaged up and uploaded to mtkfirmware.com I will post a link for anyone that wants a cleaned up rom with root!
The only downfall of the above method is that it absolutely requires that the developer have a device on hand because you can't just root the stock image file (at least, I couldn't figure out how... - bleh...
Kind Regards,
Roman
Dear roman,
Thanks for your hard work.
I have a simple question (I think) and if you have the time to reply or -any other android guru- I would be thankful.
My later issue was with a U27GT cube tablet, but I have others, one for each kid, and this is more of general question.
I am reading this and other forums about how to flash tablets from PC. My question is:
Can the flashing process be done from a SD card?
Thanks a lot and regards,
Fernando
SKorea
While trying to create my first ever Android firmware I had solve several problems, especially if you consider that I prefer under Windows instead of Linux.
I won't go into too many details as I have to assume everyone attempting this did at least some reading on the general how to of firmware installations and modifications.
Things you need:
Original firmware for your device as a IMG file
Amlogic's Customisation tool
A Rom Kitchen of your choice (I use Carliv)
System_Extractor-WIN-master
Some time...
Step1: Load the firmware into the AML tool and tick all boxes except the last one.
In the tmp folder you will find the unpacked files.
Under Level one are the files we want.
You will see a bunch of "PARTITION" files, we copy the following ones into a seperate folder for further use to create the ZIP.
I suggest to name the folder "Install" so we are all on the same page here.
boot.partition
bootloader.partition
logo.partition
recovery.partition
If you checked a flashable ZIP update before you will notice some files are missing, let's try to fix that.
Rename all partition files you copied to img, so instead of boot.partition you get boot.img.
Unpack the boot.img with your kitchen.
You will find a file "boot.img-second" - copy that into your install folder and rename it to dtb.img.
Inside the unpacked ramdisk (In your kitchen) of the boot.img you will fing the "file_contexts" file - copy that into your install folder as well.
Most AML firmware I had so far used a system.new.dat and a system.transfer.list to create the system partition.
We can create them from the system.partition file after renaming to system.img in System_Extractor-WIN-master .
To do this the system.img needs to be unpacked and we need again a copy of the file_contexts.
After the image is unpacked we can pack it again as system.new.dat and system.transfer.list.
The last missing bits can be tricky though as now we need a META-INF folder that works for our device in question.
There are two way to fix that.
Method one:
Search the usually chinese websites using Google to find original firmware for your device.
Chance are that you will find something like an OTA update - in there you will find what you need.
Method two (I never tested that):
Take the META-INF folder from an OTA update of a box with identical hardware specs.
Most important part here is the memory configuration so for a 2/16GB box you need a 2/16GB OTA update.
Next of same importance is the WiFi/Bluetooth config.
If you only have Wifi than an update for a box With daul wifi and BT4.0 won't help you.
If the actual Wifi chip is a different one but CPU, GPU, Memory and connections are the same it should still work.
Once you have the META-INF folder included into your Install folder the firmware is ready to be zipped - in theory!
The X96 for example uses a hash check for the update and created system partition.
To be able to flash your image you need to know what the original recovery would expect - has check or not.
The updater script within the META-INF folder needs to be updated to match your build.prop details as well hash check/no hash check.
Again, with an original OTA update you will find these infos.
Only if you don't have the OTA and no clue what your updater script and recovery needs you are a bit lost.
I know I has not all the steps in detail and if you are without and OTA update you need to search but otherwise feel free to ask and I will try to assist to make it complete if I can.
Downunder35m said:
While trying to create my first ever Android firmware I had solve several problems, especially if you consider that I prefer under Windows instead of Linux.
I won't go into too many details as I have to assume everyone attempting this did at least some reading on the general how to of firmware installations and modifications.
Things you need:
Original firmware for your device as a IMG file
Amlogic's Customisation tool
A Rom Kitchen of your choice (I use Carliv)
System_Extractor-WIN-master
Some time...
Step1: Load the firmware into the AML tool and tick all boxes except the last one.
In the tmp folder you will find the unpacked files.
Under Level one are the files we want.
You will see a bunch of "PARTITION" files, we copy the following ones into a seperate folder for further use to create the ZIP.
I suggest to name the folder "Install" so we are all on the same page here.
boot.partition
bootloader.partition
logo.partition
recovery.partition
If you checked a flashable ZIP update before you will notice some files are missing, let's try to fix that.
Rename all partition files you copied to img, so instead of boot.partition you get boot.img.
Unpack the boot.img with your kitchen.
You will find a file "boot.img-second" - copy that into your install folder and rename it to dtb.img.
Inside the unpacked ramdisk (In your kitchen) of the boot.img you will fing the "file_contexts" file - copy that into your install folder as well.
Most AML firmware I had so far used a system.new.dat and a system.transfer.list to create the system partition.
We can create them from the system.partition file after renaming to system.img in System_Extractor-WIN-master .
To do this the system.img needs to be unpacked and we need again a copy of the file_contexts.
After the image is unpacked we can pack it again as system.new.dat and system.transfer.list.
The last missing bits can be tricky though as now we need a META-INF folder that works for our device in question.
There are two way to fix that.
Method one:
Search the usually chinese websites using Google to find original firmware for your device.
Chance are that you will find something like an OTA update - in there you will find what you need.
Method two (I never tested that):
Take the META-INF folder from an OTA update of a box with identical hardware specs.
Most important part here is the memory configuration so for a 2/16GB box you need a 2/16GB OTA update.
Next of same importance is the WiFi/Bluetooth config.
If you only have Wifi than an update for a box With daul wifi and BT4.0 won't help you.
If the actual Wifi chip is a different one but CPU, GPU, Memory and connections are the same it should still work.
Once you have the META-INF folder included into your Install folder the firmware is ready to be zipped - in theory!
The X96 for example uses a hash check for the update and created system partition.
To be able to flash your image you need to know what the original recovery would expect - has check or not.
The updater script within the META-INF folder needs to be updated to match your build.prop details as well hash check/no hash check.
Again, with an original OTA update you will find these infos.
Only if you don't have the OTA and no clue what your updater script and recovery needs you are a bit lost.
I know I has not all the steps in detail and if you are without and OTA update you need to search but otherwise feel free to ask and I will try to assist to make it complete if I can.
Click to expand...
Click to collapse
Thank you for this explanation, but the explanation of the video to better understand everyone
Will see if I can at least add some pics while working on Nougat.
Hello,
Thanks for you tutorial.
I have a h96 Pro+ and the last firmware was a .img file... (Link of the firmware : https://mega.nz/#F!d1tHVZgA!Qc0mAom7FBHT9HDv3rGtGQ )
Is there a good guy who can convert this .img to a .zip file please ?
A lot of users are asking for this, me too and if you can help me to do this it will be really cool and appreciate
Thank you,
Carmin.
Thanks for your explanation im trting to port 7.1.1 to my tv box and i have found one funcional the only troble is the wi fi drivers not working ill give it a try latter today
Sent from my SM-N9300 using Tapatalk
Hello guys!
I have Lenovo Tab 3 [TB3-850M], unfortuantely I am trying to deodex the ROM but both methods in SuperR Kitchen failed.
1st Method using oat2dex: It fails and not fully deodex the ROM and gives a list of failed files [look at pictures]
2nd Method using baksmali/smali: It says it "succeeded" but it doesn't as when flashing the ROM it is unbootable as I got (While deodexing) Java Exception error that it couldn't find classes.dex in all the ROM files!
Please I tried all Marshmallow deodexers available on XDA but nothing seems to work, the most about-successful attempt was with SuperR oat2dex and Fulmics Deodexer but I got com.android.phone has stopped working message error loop and other apps such as Maps and Keyboard.
Thanks in advance!
P.S: If you want the system.img.ext4 and boot.img I will upload them on request as my internet is not that fast and you most probably need one from me because the one online doesn't seem to extract [I made mine by flashing the unextractable system.img using SP Flash Tool and make System Image Backup using TWRP and copied it to my PC]
Regards!
Troubleshooting
What Kitchen version?
1.1.5.9
What environment are you running the kitchen in (OS, 32/64-bit, cygwin, Bash on Windows, etc.)?
Bash on Windows x64
What device are you working on (make/model)?
Lenovo Tab 3 LTE TB3-850M arm64
What was the source you started from (system.img, system.ext4.tar, rom.zip, etc.)
system.img.ext4 from TWRP Backup
What Android version?
Marshmallow 6.0
What perm method (set_perm, set_metadata, sparse_dat, raw_img)?
set_metadata
What did you do after extracting and before building?
Didn't mess with the files before and after building/extracting, just used the commands on SuperR and flashed the finished zip file to the tablet.
Were there errors on the screen if you scroll up in the terminal?
Mentioned the errors on the first post
Send a recovery.log after flashing if you have problems flashing the ROM.
No need because TWRP flash successfully
Send a link that does not require registration to the files you started with (nandroid, system.img, boot.img, etc)
http://www.mediafire.com/file/r2p6hos5k73f161/TB3-850M-System.7z
Use the support option in the Misc Tools menu and attach the support.zip to your post.
I am not sure but looks like SuperR isn't making the support.zip, I will upload the project files instead (I think both are the same)
addas4 said:
What Kitchen version?
1.1.5.9
What environment are you running the kitchen in (OS, 32/64-bit, cygwin, Bash on Windows, etc.)?
Bash on Windows x64
What device are you working on (make/model)?
Lenovo Tab 3 LTE TB3-850M arm64
What was the source you started from (system.img, system.ext4.tar, rom.zip, etc.)
system.img.ext4 from TWRP Backup
What Android version?
Marshmallow 6.0
What perm method (set_perm, set_metadata, sparse_dat, raw_img)?
set_metadata
What did you do after extracting and before building?
Didn't mess with the files before and after building/extracting, just used the commands on SuperR and flashed the finished zip file to the tablet.
Were there errors on the screen if you scroll up in the terminal?
Mentioned the errors on the first post
Send a recovery.log after flashing if you have problems flashing the ROM.
No need because TWRP flash successfully
Send a link that does not require registration to the files you started with (nandroid, system.img, boot.img, etc)
http://www.mediafire.com/file/r2p6hos5k73f161/TB3-850M-System.7z
Use the support option in the Misc Tools menu and attach the support.zip to your post.
I am not sure but looks like SuperR isn't making the support.zip, I will upload the project files instead (I think both are the same)
Click to expand...
Click to collapse
I can't do anything about this. You would need to create an issue on the smali/baksmali github repo. Once it is fixed there, I can compile new jar files and update them in the kitchen. Check your deodex log for the smali/baksmali errors you will need to post when you create the issue/s