{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is TS TWRP 2.8.6.1. recovery with custom "TeamSuperluminal" lollipop theme and it is compatible with 4.4.x TS CM11 and TS CM12.1 5.1. This TWRP is compiled from lollipop source + there is also TS-CWM 6.0.5.1. and it is compiled from CM11 Kitkat source.
Also note this, you have to ROOT and unlock the bootloader before making any installing steps if you haven't rooted and unlocked yet.
Use this,
Unlock bootloader-needrom
Install instructions:
- download the recovery.img
- download the minimal ADB fastboot from : Minimal ADB
- Install the Lenovo Driver's (If you don't have it)
- copy the recovery_xx.img file to minimal adb folder and change name as recovery.img, you will find it where you installed
- switch on the phone and connect to PC via factory USB cable
- enable on your K910 the USB debuging option
- to boot into bootloader. Run minimal adb and type this command (adb reboot-bootloader)
- when the phone rebooted into bootloader and stay on lenovo logo, you should type this command (fastboot boot recovery.img) if you just want to boot into recovery. If you want to flash it, type this command (fastboot flash recovery recovery.img)
You can type in this command in terminal (fastboot reboot recovery).
-And it should boot into recovery
Attention
SDcard path is /data/media/0/
-Can't flash stocks with TWRP (VibeUI)
Linux user, you should know how to boot or flash .img files to device.
There's also flashable recovery.zip available! Enjoy folks...
Recommended for use with TS Cyanogenmod 12.1...
Special thanks morphicts
Credits:
- XDA@z31s1g for the "Materialised base".
I am not responsible if you break your device.
XDA:DevDB Information
[TWRP]+[CWM] for k910 TeamSuperluminal twrp recovery 2.8.6.1. + CWM 6.0.5.1., Tool/Utility for the Lenovo K910
Contributors
ekkilm, morphicts
Version Information
Status: Stable
Created 2015-04-15
Last Updated 2015-06-18
Related
Disclamer:
Use this at your own risk
Your varianty is void
Files that you need:
Kingoo temporary root
Twrp recovery
Supersu package
Recovery flasher
1:Get temporary root from kingoo
2:WITHOUT reboot install recovery with recovery flasher
3:Reboot into recovery(POWER+VOL UP+HOME)
4:Select install
5:Find supersu.zip
6:Install
That all
Links are not my and recovery arent my
LINKS
Twrp recovery: https://drive.google.com/file/d/0B-lRrn2nKLf4TW9iWHNaOXI5bjA/view?usp=docslist_api
Kingoo root: https://drive.google.com/file/d/0BxwKa-TQDYN3em9QLUwwb25kcE0/view
All them installs trought odin
Find odin in google
Use this https://play.google.com/store/apps/details?id=com.cgollner.flashify to flash recovery in temporary root
Hi TechTex198,
good job but i think it's better to install directly the Twrp without Kingo and Flashify apk into phone, a best way with Odin.
It's possible to install SuperSU package under Kingo with some shell script but it's more harder especially on KitKat.
So to do:
- Boot into HRESET : Vdwn + Home + Power
- Odin: Load twrp.tar (vivalto3mveml3g) into PDA and set Auto Reboot then Start process
- Boot into RECOVERY : Vup + Home + Power (hold on Samsung logo)
- Install Update from SDCard: UPDATE-SuperSU-v2.46.zip (latest)
- Reboot
TechTex198 said:
Disclamer:
Use this at your own risk
Your varianty is void
Files that you need:
Kingoo temporary root
Twrp recovery
Supersu package
Recovery flasher
1:Get temporary root from kingoo
2:WITHOUT reboot install recovery with recovery flasher
3:Reboot into recovery(POWER+VOL UP+HOME)
4:Select install
5:Find supersu.zip
6:Install
That all
Links are not my and recovery arent my
Click to expand...
Click to collapse
Worked !! Galaxy Trend 2 Lite : Rooted !! Thx
PDA : G318HXCU0AOE4
CSC : G318HYXA0AOE4 (This phone is the Italy Black Version )
Where did you find the recovery from? Is there a thread for it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I did it i install twrp for trend 2 lite and i use the file to flash cyanogenmod 13 marshmallow : cm-13.0-UNOFFICIAL-PORT-vivalto3mve.zip and after reboot it works very fine stable camera works and wifi and bluetooth works
This phone is my brother's. He said he just downloaded a system update, I think it is OTA. And when update starts (from the stock recovery? not sure) It stucks at 50% progress bar, and it reboots. And update starts again, and reboots again. It won't boot even after removing battery, putting battery back on and turning the phone on, it persistently go back to loop update system. Should I flash it with a stock ROM? which one? The build no. I think is 1.0020? Can I flash the 1.050 one? Here is a pic of what's happening in a loop.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Follow this guide to reboot into recovery
http://www.hardreset.info/devices/acer/acer-liquid-z630/recovery-mode/
After entering recovery , try factory resetting your device.
This will reset all data.
If the above method didnt work , only option is to flash a Rom manually using SP Flash Tool
Stock Rom
http://vache-android.com/hubicAcer/Z630/OS Images/Acer_AV0L0_T03_1.020.00_EMEA_GEN1.zip
Hello there. Please take a look at this guide by Shreps.
Download a compatible custom recovery (CWM or TWRP) for your device. Also download the firmware (ROM) for your device (list by Shreps). Please refer to the guide (there should be one). You would need to (a) Install necessary drivers, and (b) ADB and Fastboot interface (try this)
Copy the custom recovery image into the root folder of your ADB and Fastboot program. Copy the firmware to your device (via external sdcard since you cant copy directly into the internal sdcard).
Go to recovery via (a) volume up + power buttons, or if device accessible via ADB, (b) adb reboot recovery
In the recovery options, choose 'fastboot' (or simply, via adb: adb reboot bootloader)
Go to your terminal/cmd: fastboot devices - and see if your device is recognized
Then: fastboot boot "recovery.img" (replace "recovery" with the name of the recovery image)
In the recovery, navigate and select "Install" and select the firmware on the external sdcard. (wiki)
If you cant install via fastboot (bootloader must be unlocked first before using fastboot), then flash the rom via SP Flash tool (refer to the guide)
Very happy to introduce you to lk2nd for the Idol 3 6045* !
Using the "chaining" ability of bootloader, it's possible to add lk2nd to the boot sequence,
thus installing a working fastboot implementation
/!\ WARNING /!\ might not be appropriate if you use stock ROM, since it will overwrite boot partition and you will need a boot.img to use with fastboot, and not just a boot partition dump/backup !
If you use CyanogenMod/LineageOS/SailfishOS it's okay since you can get the boot.img from the ZIP you flashed already.
Install this lk2nd image to /boot partition using either EMMCdl ou Alcatel Flasher.
Then you will be able to "fastboot flash boot your-ROM-boot.img" so your phone starts as usual, and access fastboot/lk2nd using Power+VolumeDown button.
One advantage over the hybrid-MM-boot-stack hack is that lk2nd supports both old and new boot formats
(uncompressed kernel + dt.img AND compressed kernel + appended DT), also no need to downgrade special partitions.
Interesting command : fastboot oem lk_log; fastboot get_staged /dev/stdout
Thanks to Minecrell for the msm8916-lk2nd project and guidance.
Note to 6039* users : don't install this tool, it is for 6045 only ! It should be easy to add support for 6039 to lk2nd.
Download : lk2nd-idol3-20200410-1.img (md5sum : caaa7e91579ebe76472a01505d498026)
This my own build, which doesn't discriminates on panel model unlike the "official" one which only support r63315 panel at the moment.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
lk2nd for Idol 3 6045*, Tool/Utility for the Alcatel Onetouch Idol 3
Contributors
vknecht
Source Code: https://github.com/msm8916-mainline/lk2nd/
Version Information
Status: Stable
Created 2020-04-30
Last Updated 2020-04-30
Dear vknecht, thank you for all your efforts and developing for our Idol 3 6045 phone!
Before installing this lk2nd thing, I wanted to ask the following: If in the future I will install a new LineageOS or Magisk upgrade, will this upgrade overwrite both boot images (lk2nd and LineageOS) and remove fastboot ability again? Or will this upgrade overwrite only LineageOS boot.img, and lk2nd will stay intact?
Mankann said:
Dear vknecht, thank you for all your efforts and developing for our Idol 3 6045 phone!
Before installing this lk2nd thing, I wanted to ask the following: If in the future I will install a new LineageOS or Magisk upgrade, will this upgrade overwrite both boot images (lk2nd and LineageOS) and remove fastboot ability again? Or will this upgrade overwrite only LineageOS boot.img, and lk2nd will stay intact?
Click to expand...
Click to collapse
Not sure about how Magisk processes/changes boot partition, but for now flashing LineageOS as usual through TWRP will overwrite lk2nd.
Will have to look about integrating lk2nd into LineageOS boot.img...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yes until now people ask here, how to flash custom recovery over stock mi recovery. It's easy and quick detailed guide, Let's start.
Pre-requirement:
1- unlocked bootloader.2- USB debugging enabled:
- Go to settings -> My device -> All specs -> hit build number 7 times till you see message ( you are developer now..)
- Then go to settings -> Additional settings -> Developers options -> Toggle on "USB debugging".
3- Download Minimal ADB Fastboot & install it.
Steps:
1- Download the custom recovery IMG to your PC.
2- re-name the IMG file to easy name such as: flash_me.img
3- copy the IMG file to the "Minimal ADB Fastboot" installation Dictionary.
4- Run "cmd-here.exe" as Administrator.
5- turn off your device and hold the "volume down + power" to enter fastboot mode.
6- once you booted in fastboot plug-in your device with usb cable to PC.
7- type in cmd :
Code:
fastboot flash recovery flash_me.img
8- When it finished type this command, When the screen goes off, Immediately Press "Volume Up + Power buttons" to boot into Recovery mode. or you will reset all the steps of flashing
Code:
fastboot reboot
9- Done
Good job.
Just a note: regarding point 3 of the pre-requirements, the official and most updated source would be https://developer.android.com/studio/releases/platform-tools...
pnin said:
Good job.
Just a note: regarding point 3 of the pre-requirements, the official and most updated source would be https://developer.android.com/studio/releases/platform-tools...
Click to expand...
Click to collapse
Thanks for your note
I had just uploaded latest version that I use and uploaded on my drive
(I meant to involve something I already tested)
my regards
i have unlocked the bootloader and i want to install a recovery, do i need to root my phone before flashing a recovery or not???
thanks in advance
MLDamazigh said:
i have unlocked the bootloader and i want to install a recovery, do i need to root my phone before flashing a recovery or not???
thanks in advance
Click to expand...
Click to collapse
No root need it. Flash recovery in fastboot mode and ur good to go.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lineage OS 18.1 Android 11 For Poco X3 GT (choping) OR Redmi Note 10 PRO 5G (chopin)
By: Lynnrin
Bugs
Volte
You tell me...
Special Thanks
Lineage Os Team
Lynnrin
Download
Chopin:https://bit.ly/3xhYFLn
ChopinG:https://bit.ly/3qvXjsU
Kernel Source (Prebuilt): https://xiaomifirmwareupdater.com/miui/chopin/stable/V12.5.7.0.RKPMIXM/
OEM Kernel Source: https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/chopin-r-oss
Photos
HOW TO FLASH ROM
!!You need a PC or laptop that can connect to phone!!
!!TWRP flashing method is currently not supported, and we cannot provide specific operation steps!!
!!BACKUP YOUR DATA FIRST!!
You need to install ADB and Fastboot on your PC(find install guide on Google or YouTube)
1.Download boot images with Lineage Recovery and ROM on your PC
2.Turn your phone into fastboot mode,type fastboot flash boot_ab <boot images filename> to flash boot images with Lineage Recovery,then type fastboot reboot recovery to reboot to recovery
3.Use volume key to move , power key to choose. First you should format userdata Factory reset > Format data/factory reset > Format data
4.When format is done, back to main page, choose Apply update > Apply from ADB , then turn to your PC's CMD,type adb sideload <package filename> to sideload ROM package
5.When ADB starts sideloading ROMs, you can go and enjoy some afternoon tea
6.When ROM flash done,choose Reboot system now, and enjoy yourself
Magisk 25.2 Lineage Os 18.1
fastboot flash boot losroot.img
120 Hz Enable
screen-20220801-130139_1
Watch "screen-20220801-130139_1" on Streamable.
streamable.com
If you are going to use your phone with root, install this module
Rom I didn't make it Made by lynrinn Guess Won't Update
I am on exTHmUI. Would you recommend switching to this?
If you are satisfied, do not pass
Error flasing "Package is for product choping but expected chopin"
Poco X3 GT aka Choping