Hello, here i will teach you how to install a Recovery mode that is based off the CWM Recovery, it is the best choice for MTK devices!
What you will need:
-A rooted device
-A Computer ( not really needed but it would be easy to have! )
-If using a computer, also a USB cable.
-Mobileuncle MTK Tools (from the play store)
Links: (Change (dot) to a .)
One Touch Pop C7: www (dot) mediafire (dot) com/download/smwx8sowrzzy6xx/recovery_CTR_V2.4-POP-C7.img
One Touch Pop C9: www (dot) mediafire (dot) com/download/smwx8sowrzzy6xx/recovery_CTR_V2.4-POP-C7.img
One Touch Pop C5 (5036D!): www (dot) mediafire (dot) com/download/67439aq77e327mm/CTR_2.5_5036D.zip
One Touch Pop C5 (5036X!): www (dot) mediafire (dot) com/download/drne2fd3pqj5r4a/CTR_2.5_5036X.zip
(Sorry, cant post links due the spam protection!)
Step 1.
Download the file that is for your phone (links are above), and unzip the recovery.img file desktop. (Or download it on your phone and unzip it using ES File manager.)
Step 2.
Connect the phone to the computer and drag the recovery.img file to /your_phone_model/Phonestorage (It is called Phonestorage on my phone but can be named something else, if you have problems with this, leave it below!) (Or without computer, use ES File manager to cut it /sdcard)
Step 3
Now open Mobileuncle MTK tools and click on 'Upgrade Recovery', you will see the recovery.img file, click on it and then install it, click on Ok if you want to boot in Recovery mode, and you are done!
If you experience any problems, please tell me and i will try to help you.
-Remi
Thanks to:
Carliv
lohanbarth (for the links)
help
Remert said:
Hello, here i will teach you how to install a Recovery mode that is based off the CWM Recovery, it is the best choice for MTK devices!
What you will need:
-A rooted device
-A Computer ( not really needed but it would be easy to have! )
-If using a computer, also a USB cable.
-Mobileuncle MTK Tools (from the play store)
Links: (Change (dot) to a .)
One Touch Pop C7: www (dot) mediafire (dot) com/download/smwx8sowrzzy6xx/recovery_CTR_V2.4-POP-C7.img
One Touch Pop C9: www (dot) mediafire (dot) com/download/smwx8sowrzzy6xx/recovery_CTR_V2.4-POP-C7.img
One Touch Pop C5 (5036D!): www (dot) mediafire (dot) com/download/67439aq77e327mm/CTR_2.5_5036D.zip
One Touch Pop C5 (5036X!): www (dot) mediafire (dot) com/download/drne2fd3pqj5r4a/CTR_2.5_5036X.zip
(Sorry, cant post links due the spam protection!)
Step 1.
Download the file that is for your phone (links are above), and unzip the recovery.img file desktop. (Or download it on your phone and unzip it using ES File manager.)
Step 2.
Connect the phone to the computer and drag the recovery.img file to /your_phone_model/Phonestorage (It is called Phonestorage on my phone but can be named something else, if you have problems with this, leave it below!) (Or without computer, use ES File manager to cut it /sdcard)
Step 3
Now open Mobileuncle MTK tools and click on 'Upgrade Recovery', you will see the recovery.img file, click on it and then install it, click on Ok if you want to boot in Recovery mode, and you are done!
If you experience any problems, please tell me and i will try to help you.
-Remi
Thanks to:
Carliv
lohanbarth (for the links)
Click to expand...
Click to collapse
hello i have Alcatel Pop C7 the int memory is full and restart now i did hard reset but it on welcome screen only cant accesses to my phone
sorry for bad English
Pop C9's recovery file is the same as C7's, is that correct?
Because I flashed the file, and seems like CTR 2.4 C7 could not mount /sdcard (sdcard folder is empty).
i think you miss c9 link.
Related
Good day, any idea how to root Alcatel One Touch Glory 2S (4010X). Have been search through the forum and Google. Anyone who knows to root this device ?
alwayzdevil said:
Good day, any idea how to root Alcatel One Touch Glory 2S (4010X). Have been search through the forum and Google. Anyone who knows to root this device ?
Click to expand...
Click to collapse
+1
Did you already tried the MTK droid tools?
I can help you... I rooted the 4030E and helped others how to do it. Basically every MTK device (the motherboard alcatel is using) will be rooted using the trick I did with the help of some other devs here...
cyberangel22k said:
Did you already tried the MTK droid tools?
I can help you... I rooted the 4030E and helped others how to do it. Basically every MTK device (the motherboard alcatel is using) will be rooted using the trick I did with the help of some other devs here...
Click to expand...
Click to collapse
Hei bro, thanks for the reply and sorry for the late reply. I havent try the MTK Droid tools, anyway can you let me know how did u root your alcatel 4030E ? Thanks
alwayzdevil said:
Hei bro, thanks for the reply and sorry for the late reply. I havent try the MTK Droid tools, anyway can you let me know how did u root your alcatel 4030E ? Thanks
Click to expand...
Click to collapse
Here's the link. If you have any errors, ask rua1. He will help you.
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
ROOT ALCATEL 4010x
OK.. i have done working on ishuaji root tool, ive change the shell root to english version which is original from superuser DEV. hehehehe.. @Mr.Hyde.. can u post the step for me.. im to lazy to post with picture instruction.. plus not understand chinese.. hehehe..
here the step..
1st google superuser binary download, download from superuser website better.
2nd : download ishuaji root tool
HTML:
http://app.down.ishuaji.cn/lvdouapp/root/ishuaji_root.exe
3rd : install root tool
4th : open superuser binary via zip program
5th : open My Computer and go to this directory : C:\Program Files (x86)\RootTool\Android_Root (windows 8/7) C:\Program Files \RootTool\Android_Root (windows XP)
6th : delete ld_superuser.apk inside the folder or u can move to other folder as a backup (recommended if anything goes wrong n u can use back this file)
7th : replace with superuser binary that u have downloaded (just drag n drop) then RENAME it to ld_superuser.apk
Then run the root tool as per normal. and root ur device just by clicking the green button. wait unil it finish. and u will have normal superuser which is in English.
HAVE FUN GUYS.. hehhehe
jayXzMx said:
OK.. i have done working on ishuaji root tool, ive change the shell root to english version which is original from superuser DEV. hehehehe.. @Mr.Hyde.. can u post the step for me.. im to lazy to post with picture instruction.. plus not understand chinese.. hehehe..
here the step..
1st google superuser binary download, download from superuser website better.
2nd : download ishuaji root tool
HTML:
http://app.down.ishuaji.cn/lvdouapp/root/ishuaji_root.exe
3rd : install root tool
4th : open superuser binary via zip program
5th : open My Computer and go to this directory : C:\Program Files (x86)\RootTool\Android_Root (windows 8/7) C:\Program Files \RootTool\Android_Root (windows XP)
6th : delete ld_superuser.apk inside the folder or u can move to other folder as a backup (recommended if anything goes wrong n u can use back this file)
7th : replace with superuser binary that u have downloaded (just drag n drop) then RENAME it to ld_superuser.apk
Then run the root tool as per normal. and root ur device just by clicking the green button. wait unil it finish. and u will have normal superuser which is in English.
HAVE FUN GUYS.. hehhehe
Click to expand...
Click to collapse
Will this work for the Alcatel OT 4010a also?
jayXzMx said:
OK.. i have done working on ishuaji root tool, ive change the shell root to english version which is original from superuser DEV. hehehehe.. @Mr.Hyde.. can u post the step for me.. im to lazy to post with picture instruction.. plus not understand chinese.. hehehe..
here the step..
1st google superuser binary download, download from superuser website better.
2nd : download ishuaji root tool
HTML:
http://app.down.ishuaji.cn/lvdouapp/root/ishuaji_root.exe
3rd : install root tool
4th : open superuser binary via zip program
5th : open My Computer and go to this directory : C:\Program Files (x86)\RootTool\Android_Root (windows 8/7) C:\Program Files \RootTool\Android_Root (windows XP)
6th : delete ld_superuser.apk inside the folder or u can move to other folder as a backup (recommended if anything goes wrong n u can use back this file)
7th : replace with superuser binary that u have downloaded (just drag n drop) then RENAME it to ld_superuser.apk
Then run the root tool as per normal. and root ur device just by clicking the green button. wait unil it finish. and u will have normal superuser which is in English.
HAVE FUN GUYS.. hehhehe
Click to expand...
Click to collapse
Don't use this method, once you install that root tool it spams your computer with random programs and opens them randomly, it installed 10+ programs on my pc within minuets... I was able to stop them and uninstall all, I am now doing a clean wipe with 3 programs and also scanning with my antivirus, be warned.
Hi to all! My tablet is bricked I can open the recovery menu, but, even if i can use "adb sideload" command from my pc, i don't have a rom to send to my tablet. How can i solve the problem? The tablet can boot but it remains in the "initial configuration page", because a system process always crashes".... Please help me
If you can get into recovery and other things your not bricked, junior member. I don't know the exact process but if someone with an a1000 knew or was willing and instructed they could dump the rom and if someone knew how could make it into a flashable zip, maybe, like I said don't know the exact process
mypd1991 said:
If you can get into recovery and other things your not bricked, junior member. I don't know the exact process but if someone with an a1000 knew or was willing and instructed they could dump the rom and if someone knew how could make it into a flashable zip, maybe, like I said don't know the exact process
Click to expand...
Click to collapse
can anyone give me stock firmware of lenovo a1000g?
nick84tl said:
Hi to all! My tablet is bricked I can open the recovery menu, but, even if i can use "adb sideload" command from my pc, i don't have a rom to send to my tablet. How can i solve the problem? The tablet can boot but it remains in the "initial configuration page", because a system process always crashes".... Please help me
Click to expand...
Click to collapse
there is a post post in lenovo forum PREAMBLE-FOR-LENOVO-A1000-ROM-RECOVERY-ETC
u can a nandroid backup there ,after installing twrp ,just restore back up backup
place the back up u need to create a folder "TWRP"
in twrp "BACKUPS"
in backups "LENOVO_A1000_MT8317"
PUT THE RESTORE FILES IN A FOLDER CREATE THE "RESTORE FOLDER" IN ABOVE LENOVO FOLDER
Hope This helps
Caution MAKE SURE TO BACKUP YOUR IMEI AND MAC ADRESS AND BLUETOOTH ADRESS
Note : Step 6 and 7 can be shortcutted by Pressing on the hard reset button while/while not connected to PC
: this will erase all data on your internal memory, so keep all the data you wanna back up in PC or External SD card and remove it (just to be safe)
ok, so
Step 1 google A1000F_A412_01_23_130822_ROW_USER, you should find it in 4shared(dot)eu
Or http://www.4-shared.eu/download/bt6fqlKPInMXDN3q7CPuW1/A1000F-A412-01-23-130822-ROW-USER.html
Step 2: once you finish downloading, extract it, then go to the FlashTool folder and look for FlashTool.exe
Step 3, once you open FlashTool.exe, Click the checkbox DA DL All with Checksum
Step 4 Now load scatter file MT6577_Android_scatter_emmc (located in A1000F_A412_01_23_130822_ROW_USER Folder, it will be the only file show other than the flash tool folder)
Step 5 now click Format> Format All partition except Bootloader > validation > ok
Step 6 Now connect your USB to MiniUSB (charger cord) to the computer but DO NOT PLUG IT YET TO THE PC
Step 7 now hold down on your Up volume button and wait 10 sec. then plug it into pc
Step 7.1 (not really) the loading bar on the bottom of SP flash tool should turn red and other difirent colors, once its finished, there should be a popup saying OK, Close it and youre done
Step 8: now Click on download, after you download, look at Step 6 to 7.1
Step 9 IF the device fails to boot, download this ( will put link to A1000F fix tool)
Step 10 press the hard reset button (besides SD card slot) or Follow Step 6 to 7.1
Step 11 Boot UP
To install TWRP 2.5 ( Found it in lenovo russian forums) (Tested the file) (worked for my IdeaTab A1000-F)
Step 12 Download From This (Direct Link) http://lenovo-forums.ru/Files/OS/Tablets/A1000/Custom/A1000T_TWRP_v2.5.0.0.zip
Step 13 Extract it
Step 14 IGNORE the included scatter file from the TWRP download (had problems with it) and follow Step 4
Step 15 On the loaded files from Scatter file, look for recovery ( 7th File), Click on it, there should be a file explorer pop up
Step 16 On the file explorer pop up, look for the A1000F_TWRP_v2.5.0.0 folder you just extracted AND then click on the recovery.img found inside
Step 17 Now Choose Firmmware -> Upgrade and do Step 10
TO ROOT WITHOUT PC (must do step 1-17)
Step 18 Boot to recovery (hold power button + up volume button AT THESAME TIME)
Step 19 You should be at TWRP recovery, Tap on Reboot>System and there should display a warning about the system not being rooted, and it should prompt you to slide to root, SLIDE IT, it should reboot automatically
Step 20 in your app drawer, look for SU installer and click on it,Your going to be prompted to innstall SU via playstore or via TWRP (i did it via TWRP bacause im lazy, and the system apps are updating, but your free to do otherwise) it should reboot, and vioala, your rooted
To Update Firmware
Step 21 Open SuperSU>settings>scroll down>enable pro (SuperSU should restart) then Open SuperSU again>settings>survival mode
Step 22 Download This (download 1) (will update to put link) and this https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Step 23 Open the Rashr Flasher tool you just downloaded from playstore and find Download 1 then navigate Download 1 file location (Named Recovery Folder) > Stock and tap on the recovery img
Step 24 download and install the Update from Settings>about tablet>Firmware Update (make sure you have enabled survival mode in super Su, or else you will loose root privilages)
To go back to TWRP
Step 25 just use the Rashr Recovery tool and go to download 1 file location (named Recovery Folder) > TWRP and tap on the recovery img
ＨＥＬＰ！
I tried the flash tool thing ,and the red line under did popes out, about ten seconds later it popes out a message, and says that ＂ｆｌａｓｈ ｔｏｏｌ ｅｒｒｏｒ＂，＂Ｓ＿ＤＡ＿ＤＲＡＭ＿ＮＯT_SUPPORT"(3004)
What can I do?
Please help me!
P.S.my ideatab a1000f was hard bricked ,it can not go to my twrp recovery mode that i had before it bricked.:crying::crying::crying:
Its about porting Recovery easily...in 15 minutes...
Ok lets start......
_________________________________
Requirments:
1.Apktools letast version (Search on xda or google)
2.NP++ for mobile (Search on google)
3.Root Explorer or any Good file explorer (Search on google)
4.Recovery tools (Search on google)
_________________________________
Step:1
Frist take your stock boot.img,stock recovery and any other recovery like CWM or CTR (Without
TWRP)
Now put them in safe folder on your sdcard or storge and go to apktools...Unpack boot.img in a new folder then unpack Stock recovery in another folder and unpack your cwm or CTR recovery in Another folder...
All done!Now unpack your recovery in a new folder
(whitch you want to port)...
_________________________________
Step:2
Now go to your unpacked boot.img and go to
ramdisk folder then copy these files and paste it to your recovery (whitch you want to port)
1.meta_init.modem.rc
2.meta_init.project.rc
3.meta_init.rc
Done!
Now go to your unpacked stock recovery and copy ( #Karnel ) and paste it to your unpacked recovery (Whitch you want to port).Then again go to unpacked stock recovery and go to ramdisk...then copy these files and paste them in you unpacked recovery (whitch you want to port) /ramdisk and replace all...
1.fstab
2.ueventd.rc
3.ueventd.goldfish.rc.
Done!
Now go to your unpacked CWM or CTR and go to ramdisk/etc and copy ( recovery.fstab ) and paste it to you unpacked recovery (whitch you want to port) /ramdisk/etc and replace....
Done!Now go to your unpacked recovery (whitch you want to port) then go to ramdisk and open default.prop and edit this as you edit build.prop of a custom rom...
All Done!
_________________________________
Finel step :
Now go to your unpacked recovery (whitch you want to port) and click on ramdisk then repack it...done!
now you will see your new recovery named (new.img)...
Now open recovery tools and flash your new recovery...
And see magic or you can make a cwm flashable recovery.zip ...
Just download this ( http://www.mediafire.com/?yoch4142rowjkbj ) and extract it on a folder.
then renamed your new recovery file to recocery.img.
Now copy it and paste in these folder where you extracted that zip and replaced it.
Done!
now create a zip and go to recovery mood and flash it...
_________________________________
N.B. ->TWRP porting method is different...i will
give you later... Sometimes your new recovery
may not work...if its not work then try again and
be patient...
_________________________________
I hope this post was helpfull if think so and
successed to port your new recovery then dont
forget to give me some credits dude...
_________________________________
This is for mobile and those who doesn't have a PC. Sorry for bad English.
.
Credits to Md.Shafikul.islam for writing this
Please the mediafire download isn't working can you upload it to another download server like devhost.... Thanks..... it keeps saying download error
Sent from my TECNO M7 using XDA Free mobile app
everything is OK bro
Da Rex said:
Please the mediafire download isn't working can you upload it to another download server like devhost.... Thanks..... it keeps saying download error
Sent from my TECNO M7 using XDA Free mobile app
Click to expand...
Click to collapse
link is working bro. try again. by the way, I will mirror the link when I can. keep connected. thank you.
Devs,
Could any one dev help me to root and install custom recovery for my coolpad mega 3. It has MT 6737 chip android 6.0.
I would also like the to know it. There's no option to activate Root access in Developer menu directly in the phone. So probably the way is only via USB.
There is no method to root coolpad mega 3 with twrp or any custom recovery.
Hi friend, i have also coolpad mega 3 and i am writing this in my rooted coolpad device. So the question is , how i got root access. Actually rooting coolpad mega 3 was like winning god for me but fortunately i became sucessful in rooting this bloody device.
XDA community doesn't helped me in rooting my COOLPAD MEGA 3. I have rooted it with my own idea and brain.
So the steps are:
1. Download magisk manager latest version and install it in your coolpad mega 3.
2. Download stock firmware of your device.
3. Download vcom drivers and YDGP TOOL With SP FLASH TOOL. Remember all should be of latest version.
4.Install vcom drivers and after that extract your firmware in pc. It will be in the form of .CPB file.
5.Install YDGP TOOL and remember its installation folder. Now launch YDGP tool and on main screen click on select firmware then locate your firmware in pc then choose it. It will start verifying .CPB file and after that it will decompress .CPB file in the installation folder of YDGP TOOL under download folder.
6. Copy your boot.img from YDGP download folder to your coolpad phone storage. Then open magisk manager app and click on install ,then select the boot.img located to the place where you have copied it in phone storage. Click on select and then wait for the process. After that rename and save the patched boot.img to your phone storage. Now open pc and copy patched boot.img from phone storage to pc.
7.Now install and launch SP flash tool and login as developer. Switch of your Coolpad Mega 3.
8.Before above step you have to make a new folder in your pc which will contain scatter file with boot.img. Make a new folder in pc and name it coolpad3 . Go to YDGP INSTALLATION folder and open Download folder .IN Download folder open COOLPAD3053I folder. There will be a file named MtScatter.Txt.Copy it to coolpad3 folder. Also copy the patched boot.img to coolpad3.
Remember that scatter file and boot.img should be in same folder.
9.Follow step 7 and after that connect your switched off coolpadmega 3 to pc with the help of a good branded USB CABLE. Click on select scatter file in SP flashtool then it will load it and after that it will show you a menu having boot with a tick sign. Do not tick any other option. After that click on download button. If you are confused then you can search on google how to flash mediatek phones with SP flash tool.
10.It will flash boot.img patched with magisk to your phone. CONGRATS AFTER REBOOTING YOUR DEVICE YOU WILL HAVE A ROOTED COOLPAD MEGA 3.
YOU CAN CHECK IT BY MAGISK MANAGER THAT YOU HAVE INSTALLED FOR PATCHING BOOT.IMG .IF
both the option show install with a green tick in magisk manager that means your phone have been rooted.????
You can also check root status by installing rootchecker from playstore.
REMemBER THIS METHOD WILL WORK 100%.:good:
---------- Post added at 08:46 AM ---------- Previous post was at 08:37 AM ----------
XDA COMMUNITY WERE NOT ABLE TO ROOT COOLPAD MEGA 3. BECAUSE I HAVE ASKED HOW TO ROOT COOLPAD MEGA 3 TO MANY SENIOR MEMBER BUT THE ANSWER WERE EMPTY.
BUT AFTER THIS XDA COMMUNITY WILL KNOW HOW TO ROOT COOLPAD MEGA 3. I WOULD LIKE TO ASK XDA SENIOR DEVELOPERS "CAN THEY MAKE CUSTOM RECOVERY LIKE TWRP OR ANY OTHER " FOR COOLPAD MEGA 3 specially. IF YES THEN THEY SHOULD RELEASE CUSTOM RECOVERY FOR COOLPAD MEGA 3.
I AM WAITING. ???
step2?
from where do i download stick firmware. (step 2?
rohitwindows7 said:
from where do i download stick firmware. (step 2?
Click to expand...
Click to collapse
From google
Search for coolpad mega 3 stock firmware
CoolPadToolkit can be helpful to make root partly.
I needed to uninstall a lot of bundled apps so I used Root method by Magisk integrated in CoolpadToolkit.
Then I used KingRoot to delete apps.
Coolpad Toolkit
the only tool you want
coolpadtoolkit.wordpress.com
Hi all recently purchased the Mecool KM8 P 2GB/16GB S912 Amlogic, updated the firmware to 7.1 but lost root access. I have managed to find some instructions on a Russian website to root the stock firmware but can't make head nor tale of it and don't want to brick the device.
The google translate version of the instructions reads as follows:
To get root 7 Androide did:
1.Nado SuperSu create a text file without an ending .txt textBOOTIMAGE = / dev / block / boot
2. Flash card throw Recovery for 7 Androyd created Fail SuperSu and SuperSU.zip (5,63 MB)
3. Boot into Recovery with USB there "Advanced" ==> "File Manager" find the file on a flash drive that put his name it .SuperSu in and copy it into the folder / system
3. Without leaving the Recovery go to "Set" and set SuperSU.zip (5,63 MB)
Can someone please help to decipher the above?
Here's the link to the instructions website. The downloads are pinned to the top of the page. Please let me know if you have any success...
http://4pda.ru/forum/index.php?showtopic=807465&st=1100#entry62380504
1. Create a texfile with this content:
BOOTIMAGE = /dev/block/boot
If I am not mistaken then this file should be saved wit the name .SuperSU and no extension.
2. Copy this file and the Supersu.zip onto a SD with a working TWRP recovery.
3. The file .SuperSu is now to be copied into the system folder - it does not specify if the one from the box or the one from the recovery is used - I assume the one on the box. But needs to be tested to be sure.
4. Without ending the recovery session go back and install install SuperSu.
Thing is you need a recovery that works with Nougat to do any of this.
But then again translators suck and someone capable of reading russing could bring some light on it....
Managed to get it to work. Steps in common English are as follows:
To get root on Android 7.1:
1. Create a text file (eg in Notepad) and name it Supersu without an ending .txt with the folowing text BOOTIMAGE = / dev / block / boot
2. On a microsd card copy Recovery.img (TWRP 7), the created SuperSu file (from step 1) and SuperSU.zip (5.63 MB)
3. Insert the card into Boax and boot into Recovery.
4. Using theTWRP recovery got to Advanced" then "File Manager" find the created Supersu file (from step 1) and copy it into the folder / system.
5. Without leaving the Recovery go to "Install" and flash SuperSU.zip (5.63 MB) from the Microsd card
can you post the required Files here?
i dont understand russian so i dont know what they wrote on 4pda.ru
I have found all file and attached at end of the Post
1. decompress km8p.zip to the root of your TF-Card so you have 3 Files on the root of your TF-Card (.SuperSU, SuperSU.zip and recovery.img)
2. power off your KM8P
3. Press Reset and hold it
4. Power your Box on and hold Reset
5. If you see the TWRP-Logo you can stop press Reset
6. On the Screen accept write and modifying Systemfiles
7. go to Advanced" then "File Manager" copy .Supersu file from TF-Card in/ system of your Box
8. then go to "Install" and flash SuperSU.zip (5.63 MB) from the TF-Card
9. Reboot and now you have root installed
MetaIIica said:
I have found all file and attached at end of the Post
Click to expand...
Click to collapse
I think you uploaded the wrong file, as the zip file you uploaded only contain one file (km8p), which has no file extension (it is probably a .zip file).
However it is missing the other files you are talking about, so could you upload the right files?
Thanks for the effort!
afehst said:
I think you uploaded the wrong file, as the zip file you uploaded only contain one file (km8p), which has no file extension (it is probably a .zip file).
However it is missing the other files you are talking about, so could you upload the right files?
Thanks for the effort!
Click to expand...
Click to collapse
I attached the TWRP for Android 7 here, if you still need it.
I have also started a thread on how to root with Magisk instead of supersu, as supersu wouldn't work for me.
https://forum.xda-developers.com/android-stick--console-computers/amlogic/howto-km8-p-2gb-8gb-s912-amlogic-tv-box-t3745937