Ported CWM Recovery's for MediaPad 10 Link+ (S10-231u)
Hey guys!
after many hours of working and testing i managed to get some CWM Recoverys on a Mediapad 10 Link+.
The CWM Recoverys are based on Pyramid CWM or Carlivs Recoverys and the basic functions that I've tested are working.
Thx to carliv for his tools and recoveries, XDA and HWMOD's thread (http://forum.xda-developers.com/showthread.php?t=1774354) because they gave me the infos on porting a CWM.
What i did was using the newest Pyramid CWM or Carliv Recovery with a 1280x800 resolution i was able to find and replace it with my own modified recovery.fstab, init.rc, kernel and default.prop from my Mediapad.
Hope to see a working ROM in the future! :good:
HowTo:
1. Root the device and unlock the Bootloader via ADB
2. Go into Fastboot mode by holding POWER + Volume Down (Tablet must be turned off and the USB Cable connected to your PC)
3. Flash a recovery.img via "Fastboot flash recovery recovery.img"
4. Turn the Device Off
5. Boot into Recovery by holding POWER + Volume Up + Volume Down until the Screen turns on. Then release the POWER Button and only hold Volume Up + Volume Down until you're in CWM Recovery
Ported Recovery's
- Cannibal OpenTouch Recovery 2.1.3 (stable, all features seem to work)
- CWM Recovery 5.8.0.9, 6.0.0.3, 6.0.1.2
- Carliv Touch Recovery 2.7
Known Bugs:
- USB Mounting doesn't work (older CWM versions)
- Unmounting /system (CWM, Carliv Touch Recovery) which is main problem for backup, wiping, restore
Download Folder:
https://www.mediafire.com/folder/0msxwj6501wva/Huawei_Mediapad_10_Link+_Recoverys
Avoid formatting or wiping partitions at the moment because this is not stable and still a work in progress!
I'm not responsible for any bricks or errors!
Nice work!
do you have the original recovery file aswell?
xraynt8 said:
Nice work!
do you have the original recovery file aswell?
Click to expand...
Click to collapse
Thanks!
I uploaded it to the Mediafire Folder. (recovery-original.img)
UPDATE:
Managed to get the Cannibal Open Touch fully working with all features!
I was able to backup my original system, wipe all datas and restore without any problems.
USB Mounting and ADB in Recovery work aswell, i wasn't able to find something that doesn't work.
I will upload the new Cannibal Open Touch to the Mediafire Folder within the next minutes.
Now its time to figure out how Custom Roms work on the tablet.
Hello! I do want to try this but I can't find a rooting method that will work with latest ota update. Could you please point me in the right direction. Thanks for all the work you have done, I just got this tablet a month ago or so.
Steevo86 said:
Hello! I do want to try this but I can't find a rooting method that will work with latest ota update. Could you please point me in the right direction. Thanks for all the work you have done, I just got this tablet a month ago or so.
Click to expand...
Click to collapse
Have you already tried iRoot?
just google for it (im not able to post links at the moment)
DerMarder said:
Have you already tried iRoot?
just google for it (im not able to post links at the moment)
Click to expand...
Click to collapse
Yes i tried the english version of iroot and that did't work. i also tried framaroot and with no luck.
Steevo86 said:
Yes i tried the english version of iroot and that did't work. i also tried framaroot and with no luck.
Click to expand...
Click to collapse
Maybe you can Downgrade via the original Recovery when you flash a update.zip that is older than the actual version.
I am a new user.please describe elaborately. How to flash????
hi
i rooted my s10-231w
and i follow the instruction
but
3. Flash a recovery.img via "Fastboot flash recovery recovery.img"
how to do this?
"Fastboot flash recovery recovery.img" is some command line?
--------------
i learn how to use fastboot,and seems i fastboot flashed recovery
but i cannot enter recovery by"5. Boot into Recovery by holding POWER + Volume Up + Volume Down until the Screen turns on. Then release the POWER Button and only hold Volume Up + Volume Down until you're in CWM Recovery "
many thanks!
Hi dear developer,
I can't flash the device s10-231u
fastboot -i 0x18d1 flash recovery recovery_CannibalOpenTouch_2.1.3.img
sending 'recovery' (7698 KB)...
to stuck and receive not message to reboot.
best regards
fiebiee said:
Hi dear developer,
I can't flash the device s10-231u
fastboot -i 0x18d1 flash recovery recovery_CannibalOpenTouch_2.1.3.img
sending 'recovery' (7698 KB)...
to stuck and receive not message to reboot.
best regards
Click to expand...
Click to collapse
Hi, the problem was the home made.
The usb cable was too long. made in china
dmesg by debian jessie
"INFO: task fastboot:2099 blocked for more than 120 seconds.
[ 601.056046] Tainted: G O 3.16.0-4-amd64 #1
[ 601.056050] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 601.056056] fastboot D ffff88022c1784a8 0 2099 1819 0x00000004
" etc.
I have the same procedure repeated.
First make with eroot 1.3.5 (not in virtualbox, really windows ) then
adb reboot bootloader
fastboot oem unlock
fastboot oem get-bootinfo
[email protected]:~$ fastboot devices
???????????? fastboot
[email protected]:~$ fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.000s]
finished. total time: 0.000s
[email protected]:~$
Important after reboot the device. Then adb reboot bootloader and
/Android/Sdk/platform-tools$ ./fastboot flash recovery ../../../mediapad-10+/xdeveloper/recovery_CannibalOpenTouch_2.1.3.img sending 'recovery' (7698 KB)...
OKAY [ 0.298s]
writing 'recovery'...
OKAY [ 0.504s]
finished. total time: 0.802s
[email protected]:~/Android/Sdk/platform-tools$
with fastboot from the android sdk. ..... it better ????
it works......
The version of image is: S10-231uV100R001C23B001
My english is terrible, i hope the was understandable.
I not learned even, can only get better in the future . :/)
fiebiee
Hat denn schon jemand mit dem Bau einer Cm-Version für das Gerät s10-231u begonnen?
I am noob
Upload a vídeo in youtube of this tutorial ;. How unlock The bootloader via ADB?
I install the backup of a cellphone here
Hello friends someone can upload a backup of the MediaPad 10 Link +? ; (
DerMarder said:
Ported CWM Recovery's for MediaPad 10 Link+ (S10-231u)
Ported Recovery's
- Cannibal OpenTouch Recovery 2.1.3 (stable, all features seem to work)
[/B]
Click to expand...
Click to collapse
Hey,
I have the s10-231w and flashed the every single recovery of these but my recovery is now broken. The device itself is still working, same with fastboot but the recovery alone is bricked. Apparently this guide is not working for s10-231w.
My bootloader is unlocked, device is rooted and I get successful message when flashing recovery in fastboot: Attachment.
Could someone somehow upload their recovery of the s10-231w?, I've downloaded the stock rom few times but its applied from the device itself (by putting the dload file in root folder and go to settings-Update-Local and try to update from there. However, the device tries to enter recovery after that which is a stuck screen).
Best Regards
Hi,
thanks for your hard work!
I flashed Cannibal OpenTouch Recovery 2.1.3 and can boot into custom recovery.
However, I accidentally wiped the OS without making a backup before.
I tried to flash the firmware found here h**p://consumer.huawei.c*m/en/support/downloads/detail/index.htm?id=19702, but the custom recovery log says:
Code:
-- Installing: /sdcard/S10-231u_V100R001C232B001_Client_Software_General_android_4.2_EMUI_1.6_05012FCU.zip
Finding update package...
I:Update location: /sdcard/S10-231u_V100R001C232B001_Client_Software_General_android_4.2_EMUI_1.6_05012FCU.zip
Opening update package...
Installing update...
Installation aborted.
I extracted the zip-file and it seems to be an update.
So can anyone provide the stock rom please?
BTW: I tried to restore the original recovery by flashing recovery-original.img which results into a boot loop with mediapad logo. So I reflashed Cannibal OpenTouch Recovery 2.1.3.
Best regards,
anderklatsche
Hi Guyz = DI also have a 231u model: p cant seem to find a kitkat rom for this tablet: p Anyone willing to help me out a bit? : p Currently rooted and have installed Cannibal Recovery thanks to the dev who ported this recovery for this tab
Hi,
i really need a complete backup that i can flash over my tab. i messed a few things up that cant be easily undone. need help. !!!!
Hey guys!
after a long period of time im back working on the tablet.
Lets see if i can port a working kitkat rom for the Mediapad!
Hey, ich hab dir mehrere nachrichten geschrieben. Ich hoffe das du das hier liest und mir antwortest
Related
First the facts:
I have a Transformer Prime TF201
-l have Cyanogen mod 10-20140104 installed
-I used to have CWM recovery installed (Cant remember witch version)
-I have followed this guide: http://androidroot.mobi/t3_nvflash/ to get nvFlash and AndroidRoot.mobi bootloader (v9.4.2.28r01)
After this i wanted to install TWRP as i had problems taking rom backups with cwm.
I followed this guide http://teamw.in/project/twrp2/93 and downloaded and installed "openrecovery-twrp-2.3.3.0-tf201-JB.img" using fastboot
The ".img" version of twrp seems to be for those who have AndroidRoot.mobi bootloader
after this i was unable to restart from fastboot, so i just did a manual restart with the power button
Now i expected the progress bar to appear, but android just started to boot.
After the boot i tried to boot to recovery using the power menu, just booted back to android again.
Then i tried getting inn to recovery by holding power and vol down, same thing then also. just booted in to android.
I have also tried to install cwm (recovery-clockwork-5.8.3.4-tf201.img) using fastboot with the same result.. no progress bar appears after reboot.
This is the result when installing CWM in fastboot:
C:\android-sdk\platform-tools>fastboot -i 0x0b05 flash recovery cwm.img
sending 'recovery' (5408 KB)...
OKAY [ 2.594s]
writing 'recovery'...
OKAY [ 2.132s]
finished. total time: 4.734s
C:\android-sdk\platform-tools>fastboot reboot
rebooting...
finished. total time: 0.553s
(The device is not restarting, i have to do this manualy)
I have also tried installing CWM in android terminal using "dd if=/sdcard/cwm.blob of=/dev/block/mmcblk0p4"
This is the result:
[email protected]:/ $ su
[email protected]:/ # dd if=/storage/sdcard0/cwm.blob of=/dev/block/mmcblk0p4
10816+1 records in
10816+1 records out
5537896 bytes transferred in 6.596 secs (839583 bytes/sec)
So now im left without a recovery at all
Anyone that might have some tips for me?
? I just read the part where you attempted to install from the os. your prime still boots? lucky. where is the nvidia on the splash screen at boot up bottom center or bottom right?
i have same problem also, my tf201 now have bootloader unlock and twrp 2.2.2.0 recovery, i try to upgrade it to the latest version following instuctions on http://teamw.in/project/twrp2/93
on my command prompt, it said that flashing recovery is success, but everytime i boot to recovery, it is still 2.2.2.0
Solved
I was able to get twirp on by flashing an older wersion of twrp (v 2.3.1.0)
svefro said:
I was able to get twirp on by flashing an older wersion of twrp (v 2.3.1.0)
Click to expand...
Click to collapse
you were actually fortunate you did not completely brick your prime. you did twice what you should never do. you tried to put a jellybean recovery on an ICS bootloader. then not knowing if you had jellybean bootloader or not you attempted to install cwm which is strictly for ics. Both of these things are what hard bricks the most primes here. When you do want to upgrade to Jellybean I suggest you go to post 2 of the androwook thread and follow the instructions there.
I assumed i had JB bootloader since i have android 4.1.2 installed.. guess not
is this the thread you are referring to? http://forum.xda-developers.com/showthread.php?t=1674827
and this is the official ASUS JB Bootloader? Update JB Bootloader.zip ?
can i just flash the jb bootloader and then twrp 2.3.3.0?
do i need to do a whipe and reinstall my rom afterwards?
I realy appreciate the help im getting here.
Hi all,
Just followed the instructions below to get a new rom on my TF201.
Now I have Teamwin recovery booting showing V2.6.3.0 and asking for a password.
Teamwin does not show data in external or internal sdcards.
I am unable to get into fastboot mode, using power and vol down.
It has failed since running this line fastboot -i 0x0b05 flash recovery ne0zone75_tf300t.blob
I have all of the nvflash blobs etc.
Any ideas how to recover from this point?
Thanks
RR
This may help
Starting from a stock bootloader V 10.4.2.18
What you will need
Woking fastboot & adb / SDcard optional
TWRP for a 201 = twrp_tf201t.blob
@ne0zone75 TWRP for the 300 = ne0zone75_tf300t.blob
HairyBean BL & TWRP: This is effectively turn your 201 into a 300 <---- which is a flashable zip inside the zip that you downloasd
All 3 of the above file are in a zip in the Download section @ the top of every page of the thread ...... THIS ZIP IS NOT FLASHABLE...Your must unzip it to get to the real files !!! The name of this zip is 'upgrade_tf201_to_tf300t.zip'
CROMBI 201 ROM zip
A fully charged tablet
All the above files in the same directory as your fastboot.exe (if using windows) In your home folder on linux....
The process
Lets start with the TWRP recovery for the 201, let flash it with fastboot...
Power your tablet off and with the [ VOL DOWN & POWER ] buttons boot the tablet into the bootloader
Once there [ VOL DOWN ] untill the green box is on the USB ICON then [ VOL UP ] to select fastboot
Let make sure your PC can see your tablet with this command.
Code:
fastboot devices
Code:
fastboot -i 0x0b05 flash recovery twrp_tf201t.blob
Then
Code:
fastboot -i 0x0b05 reboot-bootloader
[ VOL UP ] ON RCK to enter recovery
Once in TWRP check to see if adb is working...
Code:
adb devices
Ok now that we know that is working let go ahead and push the HairyBean BL onto the tablet
Code:
adb push HairyBean_Bootloader_TWRP2.5.zip /sdcard
Now under the install tab in TWRP fine the folder and flash it....
reboot once it has fishined..If ask to install SuperUser say NO..........
LET THE BLUE BAR FILL !!!!!!!!! Once it has finished it will reboot into Hairybean TWRP....
Once booted into recovery, run this command to boot into fastboot
Code:
adb reboot-bootloader
You will see that the USB icon is missing now, this is good... If you still see the USB icon DON'T go to the next step
Now lets flash @ne0zone75 TWRP recovery
Code:
fastboot -i 0x0b05 flash recovery ne0zone75_tf300t.blob
Once that has finished let reboot into bootloader
Code:
fastboot -i 0x0b05 reboot-bootloader
Now enter recovery....
Make sure its verison 2.7.1.0
Go to Wipe////Format Data////Type yes
This can take up to 90 mins to format
DO NOT INTERRUPT THE FORMAT !!!!!!!
Now lets push CROMBI-KK onto your tab
Code:
adb push cm-11.0-2014xxxx-crombi-kk-tf201t.zip /sdcard
Find it under the install tab and flash it..
REBOOT into android, first boot can take up to 15 minutes
ADB interface working
Ok, lots of playing this morning tells me that the adb interface is working when the teamwin recovery is showing.
adb devices gives <number> recovery
Any ideas how to proceed from here, apart from carefully
RangeyRover1 said:
Ok, lots of playing this morning tells me that the adb interface is working when the teamwin recovery is showing.
adb devices gives <number> recovery
Any ideas how to proceed from here, apart from carefully
Click to expand...
Click to collapse
When on the twrp screen .....
Does the command .....
Code:
adb reboot-bootloader
Do anything ??
Thx Josh
Hello I was having a tough time trying to Flash Crombi KK rom. At 1 point I had to use a recovery blob because I was stuck. I started from there upgraded bootloader and twrp 2.5. Flashed twrp 2.8 and Crombi KK rom kept showing fail. I eventually gave up and tried to go from 2.8 TWRP back to 2.5 with JB Bootloader. Bad move I know. Whenever I pressed up to go to recovery it would get stuck. Then eventually I tried wiping data from Bootloader screen. Now the 3 options, recovery, coldboot and wipe data wont show. Stuck at Asus screen "The Device is Unlocked".
I downloaded naked drivers and android ADB drivers.. however I cannot get them to install on windows 7. I'd appreciate any help to try to this back running again
Lyvewire said:
Hello I was having a tough time trying to Flash Crombi KK rom. At 1 point I had to use a recovery blob because I was stuck. I started from there upgraded bootloader and twrp 2.5. Flashed twrp 2.8 and Crombi KK rom kept showing fail. I eventually gave up and tried to go from 2.8 TWRP back to 2.5 with JB Bootloader. Bad move I know. Whenever I pressed up to go to recovery it would get stuck. Then eventually I tried wiping data from Bootloader screen. Now the 3 options, recovery, coldboot and wipe data wont show. Stuck at Asus screen "The Device is Unlocked".
I downloaded naked drivers and android ADB drivers.. however I cannot get them to install on windows 7. I'd appreciate any help to try to this back running again
Click to expand...
Click to collapse
Do you have your nvflash blobs backed up ?
Thx Josh
lj50036 said:
Do you have your nvflash blobs backed up ?
Thx Josh
Click to expand...
Click to collapse
No blobs. I 've had this device since day one. Rooted it, bricked before but never this. I remember having a hard time making a NVFlashbackup for the same reason of my device showing up and eventually gave up. Any other suggestions?
Lyvewire said:
No blobs. I 've had this device since day one. Rooted it, bricked before but never this. I remember having a hard time making a NVFlashbackup for the same reason of my device showing up and eventually gave up. Any other suggestions?
Click to expand...
Click to collapse
No nvflash blob, no fastboot, no adb ....
There is nothing that can be done if the above statement is true ......
Thx Josh
lj50036 said:
No nvflash blob, no fastboot, no adb ....
There is nothing that can be done if the above statement is true ......
Thx Josh
Click to expand...
Click to collapse
Thanks for replying
I tried using this http://forum.xda-developers.com/showthread.php?t=2588979 to install ADB. It got to waiting for device and of course nothing. Is there something else needed to get the ADB to read the device? I downloaded the naked drivers as well but nothing showed up in device manager. No executable file to run. Am I missing something?
WooHoo
lj50036 said:
When on the twrp screen .....
Does the command .....
Code:
adb reboot-bootloader
Do anything ??
Thx Josh
Click to expand...
Click to collapse
Why, yes. yes it does Thanks.
Ok I have the RCK, Android,wipe data icons.
fastboot devices on this screen now gives <number> fastboot
Woot!
I'm keen to have specific instructions on how to recover from this point back to stock, then take a deep breath and try to get to custom.
My concern is that a lot of the threads with guidance for recovery and flashing are old, and I don't want to brick this thing.
So, is there a thread for recovery to stock from this point?
I have found this thread discussing recovery. http://forum.xda-developers.com/transformer-prime/help/guide-t2864946
am waiting for full charge of tablet at the moment.
Thanks for all the help so far.
RR
RangeyRover1 said:
Why, yes. yes it does Thanks.
Ok I have the RCK, Android,wipe data icons.
fastboot devices on this screen now gives <number> fastboot
Woot!
I'm keen to have specific instructions on how to recover from this point back to stock, then take a deep breath and try to get to custom.
My concern is that a lot of the threads with guidance for recovery and flashing are old, and I don't want to brick this thing.
So, is there a thread for recovery to stock from this point?
Thanks for all the help so far.
RR
Click to expand...
Click to collapse
You need the blob from the stock frimware downloaded from the Asus website ....
It will be in a zip file that needs unzipped twice ...... Make sure you get the correct 'SKU' for your tablet ......
Then follow this guide, skip to the first fastboot command and go from there .....
http://forum.xda-developers.com/showthread.php?t=2538028
Thx Josh
FIXED
lj50036 said:
You need the blob from the stock frimware downloaded from the Asus website ....
It will be in a zip file that needs unzipped twice ...... Make sure you get the correct 'SKU' for your tablet ......
Then follow this guide, skip to the first fastboot command and go from there .....
http://forum.xda-developers.com/showthread.php?t=2538028
Thx Josh
Click to expand...
Click to collapse
Thanks, thats got me back to square one.
Maybe a new thread detailing the pain to get to Custom rom!
Cheers Josh.
RR
tf300 update required?
Ok, i seem to be failing when i apply neowin tf300 update, when following the crombikk instructions on post #4. The system does not now boot into recovery. Is this step absolutely required for the newer roms?
Thanks
RR
Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Features:
All function in a normal TWRP
Support F2FS file system!
Battery capacity display works well!
Supported device:
C8817D
C8817E
G621-TL00
G620S-UL00
G620S-L01
Che1-CL20
Che1-CL10
Che1-L04
Install guide:
1. Install fastboot tools from google's sdk on your PC
2. Enter fastboot mode
3. Run "fastboot flash recovery twrp2.8.7.0_cherry_en_f2fs.img" in command line
4. Reboot and enjoy it
Download:
https://s.basketbuild.com/filedl/devs?dev=dianlujitao&dl=dianlujitao/cherry/twrp2.8.7.0_cherry_en_f2fs.img
XDA:DevDB Information
TWRP, Tool/Utility for all devices (see above for details)
Contributors
dianlujitao
Source Code: https://github.com/dianlujitao/android_device_huawei_cherry/tree/twrp
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2015-09-12
Created 2015-09-12
Last Updated 2015-09-17
Hi, thank you for your good work...
i would like to mention i made a back up of stock rom with your twrp for 620s-L01...
When i restore that back up, i don't have ril connection, i am not asked for my code pin
I am unable to flash recovery . It is showing success in fastboot but stock recovery is booted even after flashing this recovery. I am able to boot into recovery by connecting to pc. (fastboot boot twrp2.8.7.0_cherry_en_f2fs.img). What to do?
Madhunath said:
I am unable to flash recovery . It is showing success in fastboot but stock recovery is booted even after flashing this recovery. I am able to boot into recovery by connecting to pc. (fastboot boot twrp2.8.7.0_cherry_en_f2fs.img). What to do?
Click to expand...
Click to collapse
do " sudo fastboot boot twrp2.8.7.0_cherry_en_f2fs.img"
Madhunath said:
I am unable to flash recovery . It is showing success in fastboot but stock recovery is booted even after flashing this recovery. I am able to boot into recovery by connecting to pc. (fastboot boot twrp2.8.7.0_cherry_en_f2fs.img). What to do?
Click to expand...
Click to collapse
You should flash the latest official release.
I met the same issue and solved it by this.
It seems that the very very old bootloader will restore official recovery and boot automatically.
desalesouche said:
Hi, thank you for your good work...
i would like to mention i made a back up of stock rom with your twrp for 620s-L01...
When i restore that back up, i don't have ril connection, i am not asked for my code pin
Click to expand...
Click to collapse
When backup a AOSP-based build, select system,data,boot partition is OK.
I don't use emui, but I backup and restore a cm, it's okey
Any mirror on this? Basketbuild is not working with me...
jerryhou85 said:
Any mirror on this? Basketbuild is not working with me...
Click to expand...
Click to collapse
http://bbs.zhiyoo.com/thread-9673037-1-1.html
Please, dear friend now for Perth che2-l11
PleasePleasePleasePlease
Hi Sir will you try to compile M twrp?
desalesouche said:
Hi Sir will you try to compile M twrp?
Click to expand...
Click to collapse
Tried on nubia z9 max, nothing different
Hi Guys,
I attempted to install the twrp recovery and fastboot seemed to install it ok, but I can't get into it via vol-up & power. when i try to boot the recovery using fastboot (under windows) i get the following :
C:\ADB>fastboot boot twrp2.8.7.0_cherry_en_f2fs.img
downloading 'boot.img'...
OKAY [ 0.332s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.343s
The phone is running the new che2-l11 lollipop 5.1 build ... could this be the problem? The phone IS unlocked.
Just tried it again on a different pc. and the phone is sitting on the honor boot screen with vol-up & power.
martzweb said:
Hi Guys,
I attempted to install the twrp recovery and fastboot seemed to install it ok, but I can't get into it via vol-up & power. when i try to boot the recovery using fastboot (under windows) i get the following :
C:\ADB>fastboot boot twrp2.8.7.0_cherry_en_f2fs.img
downloading 'boot.img'...
OKAY [ 0.332s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.343s
The phone is running the new che2-l11 lollipop 5.1 build ... could this be the problem? The phone IS unlocked.
Just tried it again on a different pc. and the phone is sitting on the honor boot screen with vol-up & power.
Click to expand...
Click to collapse
This recovery is for Qualcomm 410 varient
may i ask you to update twrp for cm12.1? it seems to be broken due to cm12.1 update?
i would like to add some more device .
What the hell does Cherry have to do with anything? This is a Cherry recovery?
Honor 4x model Che2-L11 custom recovery
hi
I installed twrp for Honor 4x model Che2-L11 and worked perfect
1-install ADB Fastboot
copy TWRP_2.8.7.x_P8Lite_kirin_v2.img ADB Fastboot installation folder
hold shift key and write click on ADB Fastboot installation folder choose "open command window here"
2-run adb reboot bootloader
3- run fastboot.exe flash recovery "TWRP_2.8.7.x_P8Lite_kirin_v2.img"
note phone must be unlocked and aslo installphone driver
HiSuite (install it driver included)
note:
to check phone is connected
run
adb devices
fastboot device
twrp2.8.7.0_cherry_en_f2fs.img not worke for me(Honor 4x model Che2-L11)
download img:
http://forum.xda-developers.com/showpost.php?p=62598513&postcount=156
help
hi please help me, how can i install cynogen mod in honor 4x,
please hlep me step by step
i have che1-L04
Is twrp3 coming?
Can I use this twrp recovery for my Che2-UL00 please?
Never mind, just being dumb... I fixed it myself
Hi all,
I have the following problem: My Sony Xperia Z5 compact will not boot into recovery, but instead resumes a normal boot. I have unlocked the bootloader following the official instructions by Sony. The flashing of the recovery also seems to work fine:
Code:
$ sudo fastboot flash recovery ./twrp_recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (19800 KB)...
OKAY [ 0.611s]
writing 'recovery'...
OKAY [ 1.099s]
finished. total time: 1.710s
But both booting with Volume down+Power and with "adb reboot recovery" just boots/reboots into android.
So far I've tried both versions from here (recovery_v3.1.1.img and recovery_suzuran_230218.img), this and the newest from here (recovery_v3.2.1_17.02.2018.img).
I'm already thanking for any help in advance.
Cheers
orthen2112 said:
Hi all,
I have the following problem: My Sony Xperia Z5 compact will not boot into recovery, but instead resumes a normal boot. I have unlocked the bootloader following the official instructions by Sony. The flashing of the recovery also seems to work fine:
Code:
$ sudo fastboot flash recovery ./twrp_recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (19800 KB)...
OKAY [ 0.611s]
writing 'recovery'...
OKAY [ 1.099s]
finished. total time: 1.710s
But both booting with Volume down+Power and with "adb reboot recovery" just boots/reboots into android.
So far I've tried both versions from here (recovery_v3.1.1.img and recovery_suzuran_230218.img), this and the newest from here (recovery_v3.2.1_17.02.2018.img).
I'm already thanking for any help in advance.
Cheers
Click to expand...
Click to collapse
Recovery works fine. Hold Vol Down + Power when phone is completely off until you feel a vibration, then wait. There have been issues in the past where Magisk was keeping the phone from thoroughly turning off - if you have that issue - hold Vol Up + Power to force shutdown, then Vol Down + Power after a bit to boot to recovery.
trax7 said:
Recovery works fine. Hold Vol Down + Power when phone is completely off until you feel a vibration, then wait. There have been issues in the past where Magisk was keeping the phone from thoroughly turning off - if you have that issue - hold Vol Up + Power to force shutdown, then Vol Down + Power after a bit to boot to recovery.
Click to expand...
Click to collapse
I've actually already tried that. The shutdown with [Vol Up + Power] gets confirmed with 3 vibrations. Switching on with [Vol Down + Power] just boots to android again.
Flashing the recovery "on top" of another recovery with "sudo fastboot flash recovery ./twrp_recovery.img" should be no problem, since it replaces the previous recovery. Right?
orthen2112 said:
I've actually already tried that. The shutdown with [Vol Up + Power] gets confirmed with 3 vibrations. Switching on with [Vol Down + Power] just boots to android again.
Flashing the recovery "on top" of another recovery with "sudo fastboot flash recovery ./twrp_recovery.img" should be no problem, since it replaces the previous recovery. Right?
Click to expand...
Click to collapse
Actually it flashes it unto the FOTAKernel partition. Afaicr we needed to hook and chain-load the recovery after kernel launches on the Z5 line.
I flashed mine on Windows with the latest fastboot drivers and just did "fastboot flash recovery twrp.img". Your command looks okay and it passes tho so I dont suppose your mistake is there.
Here's what you can try - fastboot flash boot twrp.img
Flash it to the kernel partition and see what happens - if ur phone boots normally then the flashing never happened even if it says it did... :laugh:
trax7 said:
Actually it flashes it unto the FOTAKernel partition. Afaicr we needed to hook and chain-load the recovery after kernel launches on the Z5 line.
Click to expand...
Click to collapse
I have to admit I didn't understand very much in those to sentences.
trax7 said:
I flashed mine on Windows with the latest fastboot drivers and just did "fastboot flash recovery twrp.img". Your command looks okay and it passes tho so I dont suppose your mistake is there.
Click to expand...
Click to collapse
Any ideas where else I can look
trax7 said:
Here's what you can try - fastboot flash boot twrp.img
Flash it to the kernel partition and see what happens - if ur phone boots normally then the flashing never happened even if it says it did... :laugh:
Click to expand...
Click to collapse
So, that did work. Now the smartphone boots TWRP instead of Android. So this means I just replaced my bootloader, yes? What happens if I flash LineageOS from this TWRP? I believe flashing a ROM only writes to /system, is that right? And how to best replace the bootloader?
Anyhow, thanks
orthen2112 said:
I have to admit I didn't understand very much in those to sentences.
Any ideas where else I can look
So, that did work. Now the smartphone boots TWRP instead of Android. So this means I just replaced my bootloader, yes? What happens if I flash LineageOS from this TWRP? I believe flashing a ROM only writes to /system, is that right? And how to best replace the bootloader?
Anyhow, thanks
Click to expand...
Click to collapse
Okay, now we know flashing occurs. You can do anything u want from that TWRP. You didn't replace your bootloader, you replaced your kernel. We can't touch the bootloaders, they are a completely different story :d
Flashing is mostly done to /system - yes but it's not limited to that. That's just the most useful partition as you can already modify most of the others you would be interested in.
Flashing LineageOS will replace your firmware and your kernel.
trax7 said:
Okay, now we know flashing occurs. You can do anything u want from that TWRP. You didn't replace your bootloader, you replaced your kernel. We can't touch the bootloaders, they are a completely different story :d
Flashing is mostly done to /system - yes but it's not limited to that. That's just the most useful partition as you can already modify most of the others you would be interested in.
Flashing LineageOS will replace your firmware and your kernel.
Click to expand...
Click to collapse
Thank you very much!
I flashed the ROM, using the TWRP on /boot without problems and now I can also boot /recovery!
orthen2112 said:
Thank you very much!
I flashed the ROM, using the TWRP on /boot without problems and now I can also boot /recovery!
Click to expand...
Click to collapse
Glad I helped! The mods can close the thread now, I guess.
Okay, big problem here! Save me please :fingers-crossed:
I had the same problem : flashing twrp to recovery seemed to work but I was unable to boot on recovery while pressing voldown + power or with "adb reboot recovery", the phone would do a normal boot instead.
Seeing how trax7's suggestion solved orthen2112's problem, I tried the same. Bad luck, now I cannot boot AT ALL. The phone vibrates once but the screen remains black, it does not boot on TWRP, nor on regular android. Please tell me it is not bricked...
I can still go into fastboot mode.
EDIT:
When I try to boot directly on an image of TWRP (I tried several versions) using "fastboot boot recovery.img" I get "FAILED (remote: dtb not found)"
fetchaspade said:
Okay, big problem here! Save me please :fingers-crossed:
I had the same problem : flashing twrp to recovery seemed to work but I was unable to boot on recovery while pressing voldown + power or with "adb reboot recovery", the phone would do a normal boot instead.
Seeing how trax7's suggestion solved orthen2112's problem, I tried the same. Bad luck, now I cannot boot AT ALL. The phone vibrates once but the screen remains black, it does not boot on TWRP, nor on regular android. Please tell me it is not bricked...
I can still go into fastboot mode.
EDIT:
When I try to boot directly on an image of TWRP (I tried several versions) using "fastboot boot recovery.img" I get "FAILED (remote: dtb not found)"
Click to expand...
Click to collapse
Is your bootloader unlocked? Do you have the latest drivers + adb/fastboot installed?
trax7 said:
Is your bootloader unlocked? Do you have the latest drivers + adb/fastboot installed?
Click to expand...
Click to collapse
Thank you for your answer, sorry I did not notice.
My bootloader was indeed unlocked and I had adb + fastboot (on a linux distribution, never had to fetch specific drivers). In the end I tried to use flashtool to flash the stock Android L rom I had used for the downgrade (to backup the TA with the DRM keys before unlocking bootloader) which worked (I could not flash only the kernel image on boot). Then I tried again to boot on TWRP directly from fastboot mode without flashing anything: same error. I then downloaded a few recent stock Android N roms from xperifirm which flashtool could not unzip for some reason, then I found an Australian image elsewhere, and this time flashtool would accept it. So, back to Android N, I tried to flash TWRP again and it worked at last. I'm now running on the Lineage14.1+microG rom (so much better than stock roms I still can't believe it).
I guess TWRP, including old versions I tried, would not boot along the stock Android L rom that was currently flashed so I had to upgrade beforehand. I hope this will help people in the future.
Note for others, I thought I had the same problem as OP, but after doing as trax said with fastboot flash boot twrp.img it didnt boot at all(but did give a single vibrate). What worked for me is following Fetchaspade's instructions. For some reason it is not possible to go into recovery mode with lollipop, but having flashed with nougat I can now get into recovery mode with TWRP.
elfae said:
Note for others, I thought I had the same problem as OP, but after doing as trax said with fastboot flash boot twrp.img it didnt boot at all(but did give a single vibrate). What worked for me is following Fetchaspade's instructions. For some reason it is not possible to go into recovery mode with lollipop, but having flashed with nougat I can now get into recovery mode with TWRP.
Click to expand...
Click to collapse
Ofc that the latest recovery wont work for an Android version it wasn't made for (it would probably work on Marshmallow but Lollipop is too old). A different recovery would work there, the old zxz recovery if i remember correctly.
Also you can fastboot boot the recovery image directly.
Thanks for clarifying Trax, I was not aware that the latest version of TWRP was not backwards compatible with earlier android versions. My reason for posting is because I expect there will be more people following the instructions here; https://wiki.lineageos.org/devices/suzuran/install. They will need to downgrade to make a backup of their TA partition, and as I did probably forget to go back to a newer stock version since it is not mentioned in the lineageOS step by step guide.
elfae said:
Thanks for clarifying Trax, I was not aware that the latest version of TWRP was not backwards compatible with earlier android versions. My reason for posting is because I expect there will be more people following the instructions here; https://wiki.lineageos.org/devices/suzuran/install. They will need to downgrade to make a backup of their TA partition, and as I did probably forget to go back to a newer stock version since it is not mentioned in the lineageOS step by step guide.
Click to expand...
Click to collapse
You dont *have to* backup TA... It's only to preserve your original keys if you want. All of the custom kernels here emulate them anyway if you dont have the backup and LOS doesn't benefit from them at all.
Hello, owner of the RN 5 here
After the command fastboot boot twrp.img my device do not enter the twrp, but displays the mi logo and "unlocked" status.
The same happens when I use orange fox recovery.
What might have caused that?
The device is unlocked (the official way) .
Connection (cable, drivers, etc) seems to be ok (anyhow I did unlocked the BL)
C:\redmi-unlock\platform-tools_r30.0.2-windows\platform-tools>fastboot devices
ec976afd fastboot
C:\redmi-unlock\platform-tools_r30.0.2-windows\platform-tools>fastboot boot C:\redmi-unlock\twrp-3.3.1-0-vince.img
Sending 'boot.img' (36784 KB) OKAY [ 0.778s]
Booting OKAY [ 0.143s]
Finished. Total time: 0.964s
C:\redmi-unlock\platform-tools_r30.0.2-windows\platform-tools>
Please, advice
tman_pl said:
Hello, owner of the RN 5 here
After the command fastboot boot twrp.img my device do not enter the twrp, but displays the mi logo and "unlocked" status.
The same happens when I use orange fox recovery.
What might have caused that?
The device is unlocked (the official way) .
Connection (cable, drivers, etc) seems to be ok (anyhow I did unlocked the BL)
C:\redmi-unlock\platform-tools_r30.0.2-windows\platform-tools>fastboot devices
ec976afd fastboot
C:\redmi-unlock\platform-tools_r30.0.2-windows\platform-tools>fastboot boot C:\redmi-unlock\twrp-3.3.1-0-vince.img
Sending 'boot.img' (36784 KB) OKAY [ 0.778s]
Booting OKAY [ 0.143s]
Finished. Total time: 0.964s
C:\redmi-unlock\platform-tools_r30.0.2-windows\platform-tools>
Please, advice
Click to expand...
Click to collapse
Flash OrangeFox Recovery by using the fastboot flash recovery recovery.img command
Reboot into OrangeFox by pressing the power + volume up keys, until you see the OrangeFox splash screen (the keys may be may vary on your device)
From here
Installing OrangeFox Recovery
wiki.orangefox.tech
Copy the downloaded recovery image (.img file) to the folder where you have placed your ADB and Fastboot.
Or read this
Android Tip: Boot into twrp or cwm recovery without flashing
Yes, that’s true. You can boot into any recovery of your choice on your Android phone by following this guide. No need to flash and replace the stock bootloader. Though I have tested this met…
aubykhan-wordpress-com.cdn.ampproject.org
joke19 said:
Copy the downloaded recovery image (.img file) to the folder where you have placed your ADB and Fastboot.
Or read this
Click to expand...
Click to collapse
Well, that didnt work - copying both twrp and orange recovery changed nothing (still MI logo and "unlocked" status after the command fastboot boot image_file.img).
joke19 said:
Flash OrangeFox Recovery by using the fastboot flash recovery recovery.img command
Reboot into OrangeFox by pressing the power + volume up keys, until you see the OrangeFox splash screen (the keys may be may vary on your device)
From here
Installing OrangeFox Recovery
wiki.orangefox.tech
Click to expand...
Click to collapse
Well, I am not an expert - I am just affraid of doing that while fastboot boot file.img didnt work. Is it safe?
I guess I have onlu one chance to try.. Will you help me in case I dont succeed?
tman_pl said:
Well, I am not an expert - I am just affraid of doing that while fastboot boot file.img didnt work. Is it safe?
I guess I have onlu one chance to try.. Will you help me in case I dont succeed?
Click to expand...
Click to collapse
When you download the right recovery it will work
Or ask here
[Official][Recovery][TWRP]TWRP For Xiaomi Redmi 5 Plus/Redmi Note 5
Team Win Recovery Project 3.x, or TWRP3.x for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven...
forum.xda-developers.com
Maybe this can be a problem
Maximum Path Length Limitation - Win32 apps
Maximum path length limitation.
docs.microsoft.com
OMG, I am soooo lame.
I just installed android app "Device ID" and it turned out I AM ON WHYRED codename (not venice). I was pretty sure whyred = RN5 Pro, while regular RN5 - vince...
Well, Mi forum https://c.mi.com/thread-1911812-1-1.html confirms what I thought, but...
soooo ashamed.
Now I have to read again and check everything again..