Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Features:
All function in a normal TWRP
Support F2FS file system!
Battery capacity display works well!
Supported device:
C8817D
C8817E
G621-TL00
G620S-UL00
G620S-L01
Che1-CL20
Che1-CL10
Che1-L04
Install guide:
1. Install fastboot tools from google's sdk on your PC
2. Enter fastboot mode
3. Run "fastboot flash recovery twrp2.8.7.0_cherry_en_f2fs.img" in command line
4. Reboot and enjoy it
Download:
https://s.basketbuild.com/filedl/devs?dev=dianlujitao&dl=dianlujitao/cherry/twrp2.8.7.0_cherry_en_f2fs.img
XDA:DevDB Information
TWRP, Tool/Utility for all devices (see above for details)
Contributors
dianlujitao
Source Code: https://github.com/dianlujitao/android_device_huawei_cherry/tree/twrp
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2015-09-12
Created 2015-09-12
Last Updated 2015-09-17
Hi, thank you for your good work...
i would like to mention i made a back up of stock rom with your twrp for 620s-L01...
When i restore that back up, i don't have ril connection, i am not asked for my code pin
I am unable to flash recovery . It is showing success in fastboot but stock recovery is booted even after flashing this recovery. I am able to boot into recovery by connecting to pc. (fastboot boot twrp2.8.7.0_cherry_en_f2fs.img). What to do?
Madhunath said:
I am unable to flash recovery . It is showing success in fastboot but stock recovery is booted even after flashing this recovery. I am able to boot into recovery by connecting to pc. (fastboot boot twrp2.8.7.0_cherry_en_f2fs.img). What to do?
Click to expand...
Click to collapse
do " sudo fastboot boot twrp2.8.7.0_cherry_en_f2fs.img"
Madhunath said:
I am unable to flash recovery . It is showing success in fastboot but stock recovery is booted even after flashing this recovery. I am able to boot into recovery by connecting to pc. (fastboot boot twrp2.8.7.0_cherry_en_f2fs.img). What to do?
Click to expand...
Click to collapse
You should flash the latest official release.
I met the same issue and solved it by this.
It seems that the very very old bootloader will restore official recovery and boot automatically.
desalesouche said:
Hi, thank you for your good work...
i would like to mention i made a back up of stock rom with your twrp for 620s-L01...
When i restore that back up, i don't have ril connection, i am not asked for my code pin
Click to expand...
Click to collapse
When backup a AOSP-based build, select system,data,boot partition is OK.
I don't use emui, but I backup and restore a cm, it's okey
Any mirror on this? Basketbuild is not working with me...
jerryhou85 said:
Any mirror on this? Basketbuild is not working with me...
Click to expand...
Click to collapse
http://bbs.zhiyoo.com/thread-9673037-1-1.html
Please, dear friend now for Perth che2-l11
PleasePleasePleasePlease
Hi Sir will you try to compile M twrp?
desalesouche said:
Hi Sir will you try to compile M twrp?
Click to expand...
Click to collapse
Tried on nubia z9 max, nothing different
Hi Guys,
I attempted to install the twrp recovery and fastboot seemed to install it ok, but I can't get into it via vol-up & power. when i try to boot the recovery using fastboot (under windows) i get the following :
C:\ADB>fastboot boot twrp2.8.7.0_cherry_en_f2fs.img
downloading 'boot.img'...
OKAY [ 0.332s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.343s
The phone is running the new che2-l11 lollipop 5.1 build ... could this be the problem? The phone IS unlocked.
Just tried it again on a different pc. and the phone is sitting on the honor boot screen with vol-up & power.
martzweb said:
Hi Guys,
I attempted to install the twrp recovery and fastboot seemed to install it ok, but I can't get into it via vol-up & power. when i try to boot the recovery using fastboot (under windows) i get the following :
C:\ADB>fastboot boot twrp2.8.7.0_cherry_en_f2fs.img
downloading 'boot.img'...
OKAY [ 0.332s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.343s
The phone is running the new che2-l11 lollipop 5.1 build ... could this be the problem? The phone IS unlocked.
Just tried it again on a different pc. and the phone is sitting on the honor boot screen with vol-up & power.
Click to expand...
Click to collapse
This recovery is for Qualcomm 410 varient
may i ask you to update twrp for cm12.1? it seems to be broken due to cm12.1 update?
i would like to add some more device .
What the hell does Cherry have to do with anything? This is a Cherry recovery?
Honor 4x model Che2-L11 custom recovery
hi
I installed twrp for Honor 4x model Che2-L11 and worked perfect
1-install ADB Fastboot
copy TWRP_2.8.7.x_P8Lite_kirin_v2.img ADB Fastboot installation folder
hold shift key and write click on ADB Fastboot installation folder choose "open command window here"
2-run adb reboot bootloader
3- run fastboot.exe flash recovery "TWRP_2.8.7.x_P8Lite_kirin_v2.img"
note phone must be unlocked and aslo installphone driver
HiSuite (install it driver included)
note:
to check phone is connected
run
adb devices
fastboot device
twrp2.8.7.0_cherry_en_f2fs.img not worke for me(Honor 4x model Che2-L11)
download img:
http://forum.xda-developers.com/showpost.php?p=62598513&postcount=156
help
hi please help me, how can i install cynogen mod in honor 4x,
please hlep me step by step
i have che1-L04
Is twrp3 coming?
Can I use this twrp recovery for my Che2-UL00 please?
Never mind, just being dumb... I fixed it myself
Related
Ported CWM Recovery's for MediaPad 10 Link+ (S10-231u)
Hey guys!
after many hours of working and testing i managed to get some CWM Recoverys on a Mediapad 10 Link+.
The CWM Recoverys are based on Pyramid CWM or Carlivs Recoverys and the basic functions that I've tested are working.
Thx to carliv for his tools and recoveries, XDA and HWMOD's thread (http://forum.xda-developers.com/showthread.php?t=1774354) because they gave me the infos on porting a CWM.
What i did was using the newest Pyramid CWM or Carliv Recovery with a 1280x800 resolution i was able to find and replace it with my own modified recovery.fstab, init.rc, kernel and default.prop from my Mediapad.
Hope to see a working ROM in the future! :good:
HowTo:
1. Root the device and unlock the Bootloader via ADB
2. Go into Fastboot mode by holding POWER + Volume Down (Tablet must be turned off and the USB Cable connected to your PC)
3. Flash a recovery.img via "Fastboot flash recovery recovery.img"
4. Turn the Device Off
5. Boot into Recovery by holding POWER + Volume Up + Volume Down until the Screen turns on. Then release the POWER Button and only hold Volume Up + Volume Down until you're in CWM Recovery
Ported Recovery's
- Cannibal OpenTouch Recovery 2.1.3 (stable, all features seem to work)
- CWM Recovery 5.8.0.9, 6.0.0.3, 6.0.1.2
- Carliv Touch Recovery 2.7
Known Bugs:
- USB Mounting doesn't work (older CWM versions)
- Unmounting /system (CWM, Carliv Touch Recovery) which is main problem for backup, wiping, restore
Download Folder:
https://www.mediafire.com/folder/0msxwj6501wva/Huawei_Mediapad_10_Link+_Recoverys
Avoid formatting or wiping partitions at the moment because this is not stable and still a work in progress!
I'm not responsible for any bricks or errors!
Nice work!
do you have the original recovery file aswell?
xraynt8 said:
Nice work!
do you have the original recovery file aswell?
Click to expand...
Click to collapse
Thanks!
I uploaded it to the Mediafire Folder. (recovery-original.img)
UPDATE:
Managed to get the Cannibal Open Touch fully working with all features!
I was able to backup my original system, wipe all datas and restore without any problems.
USB Mounting and ADB in Recovery work aswell, i wasn't able to find something that doesn't work.
I will upload the new Cannibal Open Touch to the Mediafire Folder within the next minutes.
Now its time to figure out how Custom Roms work on the tablet.
Hello! I do want to try this but I can't find a rooting method that will work with latest ota update. Could you please point me in the right direction. Thanks for all the work you have done, I just got this tablet a month ago or so.
Steevo86 said:
Hello! I do want to try this but I can't find a rooting method that will work with latest ota update. Could you please point me in the right direction. Thanks for all the work you have done, I just got this tablet a month ago or so.
Click to expand...
Click to collapse
Have you already tried iRoot?
just google for it (im not able to post links at the moment)
DerMarder said:
Have you already tried iRoot?
just google for it (im not able to post links at the moment)
Click to expand...
Click to collapse
Yes i tried the english version of iroot and that did't work. i also tried framaroot and with no luck.
Steevo86 said:
Yes i tried the english version of iroot and that did't work. i also tried framaroot and with no luck.
Click to expand...
Click to collapse
Maybe you can Downgrade via the original Recovery when you flash a update.zip that is older than the actual version.
I am a new user.please describe elaborately. How to flash????
hi
i rooted my s10-231w
and i follow the instruction
but
3. Flash a recovery.img via "Fastboot flash recovery recovery.img"
how to do this?
"Fastboot flash recovery recovery.img" is some command line?
--------------
i learn how to use fastboot,and seems i fastboot flashed recovery
but i cannot enter recovery by"5. Boot into Recovery by holding POWER + Volume Up + Volume Down until the Screen turns on. Then release the POWER Button and only hold Volume Up + Volume Down until you're in CWM Recovery "
many thanks!
Hi dear developer,
I can't flash the device s10-231u
fastboot -i 0x18d1 flash recovery recovery_CannibalOpenTouch_2.1.3.img
sending 'recovery' (7698 KB)...
to stuck and receive not message to reboot.
best regards
fiebiee said:
Hi dear developer,
I can't flash the device s10-231u
fastboot -i 0x18d1 flash recovery recovery_CannibalOpenTouch_2.1.3.img
sending 'recovery' (7698 KB)...
to stuck and receive not message to reboot.
best regards
Click to expand...
Click to collapse
Hi, the problem was the home made.
The usb cable was too long. made in china
dmesg by debian jessie
"INFO: task fastboot:2099 blocked for more than 120 seconds.
[ 601.056046] Tainted: G O 3.16.0-4-amd64 #1
[ 601.056050] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 601.056056] fastboot D ffff88022c1784a8 0 2099 1819 0x00000004
" etc.
I have the same procedure repeated.
First make with eroot 1.3.5 (not in virtualbox, really windows ) then
adb reboot bootloader
fastboot oem unlock
fastboot oem get-bootinfo
[email protected]:~$ fastboot devices
???????????? fastboot
[email protected]:~$ fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.000s]
finished. total time: 0.000s
[email protected]:~$
Important after reboot the device. Then adb reboot bootloader and
/Android/Sdk/platform-tools$ ./fastboot flash recovery ../../../mediapad-10+/xdeveloper/recovery_CannibalOpenTouch_2.1.3.img sending 'recovery' (7698 KB)...
OKAY [ 0.298s]
writing 'recovery'...
OKAY [ 0.504s]
finished. total time: 0.802s
[email protected]:~/Android/Sdk/platform-tools$
with fastboot from the android sdk. ..... it better ????
it works......
The version of image is: S10-231uV100R001C23B001
My english is terrible, i hope the was understandable.
I not learned even, can only get better in the future . :/)
fiebiee
Hat denn schon jemand mit dem Bau einer Cm-Version für das Gerät s10-231u begonnen?
I am noob
Upload a vídeo in youtube of this tutorial ;. How unlock The bootloader via ADB?
I install the backup of a cellphone here
Hello friends someone can upload a backup of the MediaPad 10 Link +? ; (
DerMarder said:
Ported CWM Recovery's for MediaPad 10 Link+ (S10-231u)
Ported Recovery's
- Cannibal OpenTouch Recovery 2.1.3 (stable, all features seem to work)
[/B]
Click to expand...
Click to collapse
Hey,
I have the s10-231w and flashed the every single recovery of these but my recovery is now broken. The device itself is still working, same with fastboot but the recovery alone is bricked. Apparently this guide is not working for s10-231w.
My bootloader is unlocked, device is rooted and I get successful message when flashing recovery in fastboot: Attachment.
Could someone somehow upload their recovery of the s10-231w?, I've downloaded the stock rom few times but its applied from the device itself (by putting the dload file in root folder and go to settings-Update-Local and try to update from there. However, the device tries to enter recovery after that which is a stuck screen).
Best Regards
Hi,
thanks for your hard work!
I flashed Cannibal OpenTouch Recovery 2.1.3 and can boot into custom recovery.
However, I accidentally wiped the OS without making a backup before.
I tried to flash the firmware found here h**p://consumer.huawei.c*m/en/support/downloads/detail/index.htm?id=19702, but the custom recovery log says:
Code:
-- Installing: /sdcard/S10-231u_V100R001C232B001_Client_Software_General_android_4.2_EMUI_1.6_05012FCU.zip
Finding update package...
I:Update location: /sdcard/S10-231u_V100R001C232B001_Client_Software_General_android_4.2_EMUI_1.6_05012FCU.zip
Opening update package...
Installing update...
Installation aborted.
I extracted the zip-file and it seems to be an update.
So can anyone provide the stock rom please?
BTW: I tried to restore the original recovery by flashing recovery-original.img which results into a boot loop with mediapad logo. So I reflashed Cannibal OpenTouch Recovery 2.1.3.
Best regards,
anderklatsche
Hi Guyz = DI also have a 231u model: p cant seem to find a kitkat rom for this tablet: p Anyone willing to help me out a bit? : p Currently rooted and have installed Cannibal Recovery thanks to the dev who ported this recovery for this tab
Hi,
i really need a complete backup that i can flash over my tab. i messed a few things up that cant be easily undone. need help. !!!!
Hey guys!
after a long period of time im back working on the tablet.
Lets see if i can port a working kitkat rom for the Mediapad!
Hey, ich hab dir mehrere nachrichten geschrieben. Ich hoffe das du das hier liest und mir antwortest
Here is the CWM Recovery!
-NOT WORKING-
PROJECT ABANDONED FOR NOW
How to install:
1 Make sure your phone have usb debugging on and connect it to pc.
2 Run adb tools
3 Type:
Code:
adb devices
If your device appears you can continue.
4 Type:
Code:
adb reboot bootloader
5 Your phone will reboot in fastboot mode. Then make sure you have recovery image file in the same folder of adb tools
6 Type
Code:
fastboot flash recovery CWM-Tulip.img
ATTENTION: The name can change (if you renamed file for example "CWM" you must to type fastboot flash recovery CWM.img)
7 Done! After operation is completed, reboot your device. For boot in recovery press power+vol-, then when phone vibrate, press for much time vol-.
DOWNLOAD RECOVERY IMG FILE: HERE
ROM FIRMWARE REQUIRED: Stock/Any with unlocked bootloader
THIS RECOVERY WAS NOT TESTED.
Thanks to:
@husam666 for succefully maked TWRP
CWM Recovery
Will we have gui with this one?
alby_var said:
Here is the CWM Recovery!
-NOT TESTED-
How to install:
1 Make sure your phone have usb debugging on and connect it to pc.
2 Run adb tools
3 Type:
Code:
adb devices
If your device appears you can continue.
4 Type:
Code:
adb reboot bootloader
5 Your phone will reboot in fastboot mode. Then make sure you have recovery image file in the same folder of adb tools
6 Type
Code:
fastboot flash recovery CWM-Tulip.img
ATTENTION: The name can change (if you renamed file for example "CWM" you must to type fastboot flash recovery CWM.img)
7 Done! After operation is completed, reboot your device. For boot in recovery press power+vol-, then when phone vibrate, press for much time vol-.
DOWNLOAD RECOVERY IMG FILE: HERE
ROM FIRMWARE REQUIRED: Stock/Any with unlocked bootloader
THIS RECOVERY WAS NOT TESTED.
Thanks to:
@husam666 for succefully maked TWRP
CWM Recovery
Click to expand...
Click to collapse
Don't work. No boot into the recovery and follow normal boot.
Thank you for try
Have you booted with vol- etc...? Anyway, thank you for testing!
Yes, flash succefull and no problem with phone,I tried by buttons and gravitybox reboot menu
Ok, later i try to fix...
Sent from my E2303 using XDA Free mobile app
Hello guys i've rebuilt lastest kernel (1.2.1 rev in SonyXperia World github) and generated dtb from that source. Then i compiled cwm with this kernel from cm12.1 source.
Someone with rooted phone could test it ?
https://drive.google.com/file/d/0BzfufWMSEaKVMVJnVmltOVFfdDQ/view?usp=sharing
tonystark88 said:
Hello guys i've rebuilt lastest kernel (1.2.1 rev in SonyXperia World github) and generated dtb from that source. Then i compiled cwm with this kernel from cm12.1 source.
Someone with rooted phone could test it ?
https://drive.google.com/file/d/0BzfufWMSEaKVMVJnVmltOVFfdDQ/view?usp=sharing
Click to expand...
Click to collapse
With rom .112, flashing the recovery just flash the firm, no work sorry. Finally after two logos of sony, start normally. volume- + power and hold volume- (or fast push many times)
Tried, phone boot in system ok, but not boot in recovery.... i really want to build for this device, but my Ubuntu give a lot of errors.... This is linux, a good OS, but full of errors...
alby_var said:
Tried, phone boot in system ok, but not boot in recovery.... i really want to build for this device, but my Ubuntu give a lot of errors.... This is linux, a good OS, but full of errors...
Click to expand...
Click to collapse
That isn't due to Linux man, it's because we have a unfinished kernel!
Like I already mentioned, many people are working hard to get it done.
I hope u will understand it
Sent from my E2303 using XDA Free mobile app
This work for anyone ?
Nope, this is outdated and haven't ever work.....
This TWRP & TWRP Installer is Unofficial.
Official TWRP Can find on following link : https://forum.xda-developers.com/one-power/how-to/official-twrp-motorola-one-power-t3848354
NOTE:- Decryption support available now for TWRP in Fastboot mode only (TWRP installer currently not support for decryption)
Credit & Thanks
@erfanoabdi for bringing officeal TWRP for MOTO one Power
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Warning:-
I am not responsible for bricked devices.
Your warranty will void now. Do it at your own Risk.
Requirement:-
1. Unlock Bootloader Link By @rushiranpise :- https://forum.xda-developers.com/one-power/how-to/guide-motorola-one-power-unlock-relock-t3858797
2. Minimal adb & fastboot install on pc :- https://forum.xda-developers.com/showthread.php?t=2317790
Note: - As google introduce the partation AB for android one devices so there is no recovery partation sepereatly .
We need to patch recovery into Boot.img.
Guide:-
1. Download Twrp recovery.img & TWRP Installer. keep TWRP_recovery.img in adb folder and copy twrp insatller to sd card of phone
2. go to settings/about phone/build number (tap build no for 7 time now developer option available in settings)
3. go to developer option turn on usb debugging .
4. then go to pc download and extract and copy adb fastboot driver folder in Drive C. (or install form net.)
5. Go in fastboot folder which is copied to C. press and hold shift key on your key board and click right key on your mouse . it will show option open cmd here or open power shell window here.
6. Click it, A cmd window will open. or you can open CMD in pc as admin and use cd cmd to adb minimul folder.
type "adb devices" - it show some no of your device in cmd window on pc if not just revoke adb from your phone developer setting and give permission from your phone screen)
type "adb reboot bootloader" your phone reboot in bootloader mode.
Now Type in CMD :-1. fastboot devices (a device no. will show in cmd window on pc) if not means fastboot not installed properly reinstall it.
2. fastboot boot TWRP_recovery.img (phone will boot in twrp temporary)
(Now if you want to read your internal storage in twrp then you need to wipe by select format data option at bottem right of twrp. Beware it will erase all data from your phone ) if you not want then skip this
3. select install option and select sd card from select storage option from twrp.
4. select twrp installer which you copied into sd card and install.
Done TWRP now installed into boot. reboot to recovery and then reboot to system.
Note:- you need to flash this installer after every rom flashing or boot flashing to patch boot again because now twrp is inside the boot itself
New Link TWRP3.3.1 (update)- https://drive.google.com/open?id=1iRpOyUA-FleNwiWO7Rmu5kEeWjgmDBox (decryption support)
Link TWRP3.3.0 (update)- https://drive.google.com/open?id=1k5nZ3AfAd8GEkbPN3ntPj7c922VbqqfZ (decryption support)
As in TWRP 3.3.0 there is no need of twrp installer zip, in advance function of twrp there is option to install ramdisk into boot. this option is available but not working for us . it is installing but stuck on teamwin logo so use only as boot in twrp don't install it.
OLD LINKS : TWRP Installer :-https://drive.google.com/open?id=1mTlm2DRrIfOTeSpB4YnVLKCVcKtPjgF7
TWRP recovery :-https://drive.google.com/open?id=1xzg-TpDOska_w9aExyKVflKBCA8TRD6O
TWRP Decryption Supported Recovery:- https://drive.google.com/open?id=1iYOk0OdddPuylfl0TRI73d9zSYigllwV
How to Take Nandroid Backup and Restore (Only for Decryption support twrp)
1. boot into twrp via fastboot and enter your pin or password to decrypt.
2. Most important - go to backup and unselect oem and system and vendor. (there are two system and vendor unselect one and only select system image and vendor image to take backup)
3. now select storage where to take backup either internal or external or usb otg.
4. take backup.
5. For restore select restore and do.
6. step 2 is most improtant never use these partition to take backup or restore.
Note:- if after restore phone not boot properly or any issue don't panic restore stock rom(which backup you have) & boot and do process again to resotre. always better to restore only boot, system image and vendor image and data only.
Version-4
added all official support in this
Removed MTP & fix bugs for wiping partition
Removed Toybox & included busybox
advance versoin then official TWRP(Compiled with PIE source)
Decryption Working now (Not in installer)
thx.
I get this error, someone knows how to solve it ?
colorist said:
thx.
Click to expand...
Click to collapse
HTML:
PS C:\Program Files (x86)\Minimal ADB and Fastboot> .\fastboot boot TWRP_recovery.img
downloading 'boot.img'...
OKAY [ 0.615s]
booting...
FAILED (remote failure)
finished. total time: 1.522s
I have my bootloader unlocked , and I'm trying to install TWRP in my moto one
I get this error, someone knows how to solve it ?
angelogiuseppe said:
HTML:
PS C:\Program Files (x86)\Minimal ADB and Fastboot> .\fastboot boot TWRP_recovery.img
downloading 'boot.img'...
OKAY [ 0.615s]
booting...
FAILED (remote failure)
finished. total time: 1.522s
I have my bootloader unlocked , and I'm trying to install TWRP in my moto one
I get this error, someone knows how to solve it ?
Click to expand...
Click to collapse
same here, any help ???
Amaterasus said:
same here, any help ???
Click to expand...
Click to collapse
try transferring the .img file to sd card first and then try the same command
maybe it will help
you can try these methods too:
i) check if the bootloader is getting lock again
ii) you've turned on oem unlocking in develeper options
iii) check the partiton isn't corrupted
and if these does not help you try factory resetting your device.
good luck
we have to flash installer after boot into recovery?
ZeroVirus said:
we have to flash installer after boot into recovery?
Click to expand...
Click to collapse
yes bro
and you'll have to flash it everytime you install a custom rom
---------- Post added at 05:27 PM ---------- Previous post was at 05:24 PM ----------
Amaterasus said:
same here, any help ???
Click to expand...
Click to collapse
if you are still getting this error
I find a way to get through it
just enter the command and press enter without connecting your phone
it will show that its waiting for device
then get into the bootloader by holding down power and volume down button
then connect the phone to pc
it should do the work
Does the latest twrp 3.3.0 works with the flash command or I can only boot it?
I am currently using the old version with the twrp installer.
Wanted to know if the latest twrp is working with flashing recovery partition.
Plz port multi rom twrp for one power
Not working
nerdfail said:
Does the latest twrp 3.3.0 works with the flash command or I can only boot it?
I am currently using the old version with the twrp installer.
Wanted to know if the latest twrp is working with flashing recovery partition.
Click to expand...
Click to collapse
Yes same question here ??
P30 Note?
Hello,
will it work with Motorola P30 Note (XT1942-1)? Basically the same phone, but without LTE B20.
TWRP not decrypt internal memory.
Hi sir.
I am using TWRP recovery 3.2.3 on my Motorola one Power.
I am facing problem internal memory are showing incrypted.
How can I fix this.?
I also used it new updates. They are not working.
When I flashed this twrp-3.3.1-1-chef.img internal file was decrypt but twrp shows devices unrooted.
Can you help me out sir.
I'm trying to install twrp latest version 3.6 plus but after boot it's not open stuck at the twrp logo after reboot
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Unlocked bootloader is required.
Installation
To temporarily boot this recovery:
Code:
fastboot boot mali.img
To permanently install it:
fastboot flash recovery mali.img
Done!
Download
Mega
XDA:DevDB Information
TWRP for Moto G6, Tool/Utility for the Moto G6
Contributors
@Electimon
@dejello
Version Information
Status: Beta
Created 2019-04-27
Last Updated 2019-04-27
It's of no use now that there are no 64 bit roms.
Chirag91 said:
It's of no use now that there are no 64 bit roms.
Click to expand...
Click to collapse
We already have an Android 10 X64 Rom in testing, and also an X64 version of Orange Fox Recovery.
Wvanderlei21 said:
We already have an Android 10 X64 Rom in testing, and also an X64 version of Orange Fox Recovery.
Click to expand...
Click to collapse
That's wonderful is radio, bluetooth working?
Chirag91 said:
That's wonderful is radio, bluetooth working?
Click to expand...
Click to collapse
Practically everything works, the developer is only correcting some small bugs ...
Electimon said:
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Unlocked bootloader is required.
Installation
To temporarily boot this recovery:
Code:
fastboot boot mali.img
To permanently install it:
fastboot flash recovery mali.img
Done!
Download
Mega
XDA:DevDB Information
TWRP for Moto G6, Tool/Utility for the Moto G6
Contributors
@Electimon
@dejello
Version Information
Status: Beta
Created 2019-04-27
Last Updated 2019-04-27
Click to expand...
Click to collapse
Can you upload it to another site? My transfer quota is exceeded in mega...
Someone knows how to downgrade this recovery?
Decryption doesn't work just like dejellos TWRP.
Source
Where is the source for this recovery?
it says image is corrupt but when i booted it it worked
sans1131 said:
it says image is corrupt but when i booted it it worked
Click to expand...
Click to collapse
The bootloader is expecting the stock recovery.img; not mali.img. it is also expecting a certain hash and other identifying features.
To the bootloader the image is corrupted. To us, it`s a modern miracle.
sans1131 said:
it says image is corrupt but when i booted it it worked
Click to expand...
Click to collapse
not OEM = corrupt
in combination with a unlocked bootloader = every image is corrupt, even OEM ones
is it normal, that when Im restoring a backup of a rom it is like fresh installing the rom? None of my installed apps are restored, all app data is gone... Did I something wrong or is this custom recovery not working correctly. I mean why should I do a 9gigabyte backup and restore it to get the same result as I could have when simply flashing the 600MB ROM zip
externus said:
is it normal, that when Im restoring a backup of a rom it is like fresh installing the rom? None of my installed apps are restored, all app data is gone... Did I something wrong or is this custom recovery not working correctly. I mean why should I do a 9gigabyte backup and restore it to get the same result as I could have when simply flashing the 600MB ROM zip
Click to expand...
Click to collapse
Did you backup /data??
WoKoschekk said:
Did you backup /data??
Click to expand...
Click to collapse
I backed up everything that was available. I think for Data was something like "no ext." mentioned.
Did I had to Mount something before backup/restore?
Its some years ago that I used a custom recovery because of that I was curious about my problem.
externus said:
I backed up everything that was available. I think for Data was something like "no ext." mentioned.
Did I had to Mount something before backup/restore?
Its some years ago that I used a custom recovery because of that I was curious about my problem.
Click to expand...
Click to collapse
No, it's not necessary to mount any partition.
Maybe decryption issues?
Ever since installing this, rebooting always goes into the bootloader. From the bootloader, I can boot into system or recovery without a problem, but... well, there must be a way to fix this. I know that others have the same problem, but has anyone found a fix?
Cheers
fastboot flash recovery mali.img
target reported max download size of 534773760 bytes
sending 'recovery' (21620 KB)...
OKAY [ 0.505s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.355s]
finished. total time: 0.860s
--> when booting into recovery: "no command". ---> there a fix? Using the "boot" command it is working perfectly, but I'd like to flash so I can install Official RR ROM
fabit00 said:
fastboot flash recovery mali.img
target reported max download size of 534773760 bytes
sending 'recovery' (21620 KB)...
OKAY [ 0.505s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.355s]
finished. total time: 0.860s
--> when booting into recovery: "no command". ---> there a fix? Using the "boot" command it is working perfectly, but I'd like to flash so I can install Official RR ROM
Click to expand...
Click to collapse
Flash TWRP and boot directly into recovery by using Vol-/+ and Power. Do not boot the device into system!
WoKoschekk said:
Flash TWRP and boot directly into recovery by using Vol-/+ and Power. Do not boot the device into system!
Click to expand...
Click to collapse
Okay, so:
1. security settings to lock option "password" instead of "pattern" (why you will see in step 7 & 8.)
2. power off
3. power button + volume down --> bootloader
4. in powershell putting "fastboot flash recovery mali.img" command with the output of post #18
5. via volume down button selecting "boot into recovery"
6. TWRP shows up with the "decription"
7. I enter the password which I set in the OS in step 1
8. "decription error" --> okay, so I cancel, then going to
9. "Install" in TWRP ---> /sdcard nothing there, altough there should be my zips (RR and magisk)
Thanks!
Edit:
Model XT1925-5 with latest Stock ROM (PPSS29.55-337-7-10) installed and bootloader unlocked (of course)
Hello, owner of the RN 5 here
After the command fastboot boot twrp.img my device do not enter the twrp, but displays the mi logo and "unlocked" status.
The same happens when I use orange fox recovery.
What might have caused that?
The device is unlocked (the official way) .
Connection (cable, drivers, etc) seems to be ok (anyhow I did unlocked the BL)
C:\redmi-unlock\platform-tools_r30.0.2-windows\platform-tools>fastboot devices
ec976afd fastboot
C:\redmi-unlock\platform-tools_r30.0.2-windows\platform-tools>fastboot boot C:\redmi-unlock\twrp-3.3.1-0-vince.img
Sending 'boot.img' (36784 KB) OKAY [ 0.778s]
Booting OKAY [ 0.143s]
Finished. Total time: 0.964s
C:\redmi-unlock\platform-tools_r30.0.2-windows\platform-tools>
Please, advice
tman_pl said:
Hello, owner of the RN 5 here
After the command fastboot boot twrp.img my device do not enter the twrp, but displays the mi logo and "unlocked" status.
The same happens when I use orange fox recovery.
What might have caused that?
The device is unlocked (the official way) .
Connection (cable, drivers, etc) seems to be ok (anyhow I did unlocked the BL)
C:\redmi-unlock\platform-tools_r30.0.2-windows\platform-tools>fastboot devices
ec976afd fastboot
C:\redmi-unlock\platform-tools_r30.0.2-windows\platform-tools>fastboot boot C:\redmi-unlock\twrp-3.3.1-0-vince.img
Sending 'boot.img' (36784 KB) OKAY [ 0.778s]
Booting OKAY [ 0.143s]
Finished. Total time: 0.964s
C:\redmi-unlock\platform-tools_r30.0.2-windows\platform-tools>
Please, advice
Click to expand...
Click to collapse
Flash OrangeFox Recovery by using the fastboot flash recovery recovery.img command
Reboot into OrangeFox by pressing the power + volume up keys, until you see the OrangeFox splash screen (the keys may be may vary on your device)
From here
Installing OrangeFox Recovery
wiki.orangefox.tech
Copy the downloaded recovery image (.img file) to the folder where you have placed your ADB and Fastboot.
Or read this
Android Tip: Boot into twrp or cwm recovery without flashing
Yes, that’s true. You can boot into any recovery of your choice on your Android phone by following this guide. No need to flash and replace the stock bootloader. Though I have tested this met…
aubykhan-wordpress-com.cdn.ampproject.org
joke19 said:
Copy the downloaded recovery image (.img file) to the folder where you have placed your ADB and Fastboot.
Or read this
Click to expand...
Click to collapse
Well, that didnt work - copying both twrp and orange recovery changed nothing (still MI logo and "unlocked" status after the command fastboot boot image_file.img).
joke19 said:
Flash OrangeFox Recovery by using the fastboot flash recovery recovery.img command
Reboot into OrangeFox by pressing the power + volume up keys, until you see the OrangeFox splash screen (the keys may be may vary on your device)
From here
Installing OrangeFox Recovery
wiki.orangefox.tech
Click to expand...
Click to collapse
Well, I am not an expert - I am just affraid of doing that while fastboot boot file.img didnt work. Is it safe?
I guess I have onlu one chance to try.. Will you help me in case I dont succeed?
tman_pl said:
Well, I am not an expert - I am just affraid of doing that while fastboot boot file.img didnt work. Is it safe?
I guess I have onlu one chance to try.. Will you help me in case I dont succeed?
Click to expand...
Click to collapse
When you download the right recovery it will work
Or ask here
[Official][Recovery][TWRP]TWRP For Xiaomi Redmi 5 Plus/Redmi Note 5
Team Win Recovery Project 3.x, or TWRP3.x for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven...
forum.xda-developers.com
Maybe this can be a problem
Maximum Path Length Limitation - Win32 apps
Maximum path length limitation.
docs.microsoft.com
OMG, I am soooo lame.
I just installed android app "Device ID" and it turned out I AM ON WHYRED codename (not venice). I was pretty sure whyred = RN5 Pro, while regular RN5 - vince...
Well, Mi forum https://c.mi.com/thread-1911812-1-1.html confirms what I thought, but...
soooo ashamed.
Now I have to read again and check everything again..