I've been doing some digging around. So far there are a lot of holster cases and phone carrying cases out there but I am more of a minimalist so I have kept searching. In the past 24 hours, I did see the following cases which caught my eye:
Black Case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Clear Frosted Cased
I like the black case overall, but the fact that the Clear Frosted case has 'Idol' engraved on it gives it extra appeal. Personally I'm hoping that a bumper is released soon so that I can show off the fancy back to the Idol 3
I usually go naked nowadays, but I was eyeing the official Alcatel clear shell. Looks pretty thin, and only $12.
arampapaz said:
I usually go naked nowadays, but I was eyeing the official Alcatel clear shell. Looks pretty thin, and only $12.
Click to expand...
Click to collapse
Yeah I liked that one a lot. I hope that they release some more pics of it closer to the release just to be sure.
I have gone without a case here and there but a few reviewers have mentioned the phone can feel slippery at times and so I don't want to risk it.
Going naked with this one. That's the great thing about it being cheap! I did tweet Slick Wraps if they had any plans about supporting this phone. They said they will see how popular it is and they will decide. Imagine black leather on the back of this!
Ever since I got into less expensive unlocked phones I don't use cases much. I get to enjoy the phones as they were meant to be. I have been using a HUAWEI Ascend Mate 2, ZTE ZMAX, and LG L90, all without cases or screen protectors.
arampapaz said:
Ever since I got into less expensive unlocked phones I don't use cases much. I get to enjoy the phones as they were meant to be. I have been using a HUAWEI Ascend Mate 2, ZTE ZMAX, and LG L90, all without cases or screen protectors.
Click to expand...
Click to collapse
I do think that screen protectors are the biggest scam unless you buy a phone with the intention of reselling it every time.
macallik said:
I do think that screen protectors are the biggest scam unless you buy a phone with the intention of reselling it every time.
Click to expand...
Click to collapse
Seriously? When I buy a used phone, the condition of the screen is the single biggest factor to me! Not to mention that some devices feel better to the finger with a tempered glass protector installed. It seems a very logical investment in $5-$10 to get a good screen protector right away.
---------- Post added at 05:03 PM ---------- Previous post was at 04:46 PM ----------
To your original question, I'm going to at least put on a cheap TPU case on the new Idol 3 (if indeed I end up keeping it). Since it's slippery and already thin, a slim case will be a helpful, unobtrusive addition. But there's not much out there just yet.
zhamilton05 said:
Seriously? When I buy a used phone, the condition of the screen is the single biggest factor to me! Not to mention that some devices feel better to the finger with a tempered glass protector installed. It seems a very logical investment in $5-$10 to get a good screen protector right away.
Click to expand...
Click to collapse
That is the point I am making. For me, the only purpose of a screen protector imo is for resale value. Outside of that I feel like it is a detriment to the aesthetics/user experience.
macallik said:
I've been doing some digging around. So far there are a lot of holster cases and phone carrying cases out there but I am more of a minimalist so I have kept searching. In the past 24 hours, I did see the following cases which caught my eye:
Black Case
Clear Frosted Cased
I like the black case overall, but the fact that the Clear Frosted case has 'Idol' engraved on it gives it extra appeal. Personally I'm hoping that a bumper is released soon so that I can show off the fancy back to the Idol 3
Click to expand...
Click to collapse
Idol is not engraved, but rather "showing" through from the back of phone. Check the other pictures and you will see no engraving. I have ordered this; going to check the fit with the case in my Seidio SURFACE Holster for Samsung Galaxy Note 3. Currently using this holster for my OPO with a Diztronic Full Matte Black Flexible TPU Case for OnePlus One and it is a good fit. I find the 5.5." display phones (I didn't say phablet on purpose!) do better in a holster rather than my pocket. Just a preference thing I guess.
naked all the way, the idol 3 is really thin and I'd like to keep it that way. I've had the moto g naked and just a few small scratches. the idol 3 has dragontail glass which should prevent scratches anyway
HughJanus said:
naked all the way, the idol 3 is really thin and I'd like to keep it that way. I've had the moto g naked and just a few small scratches. the idol 3 has dragontail glass which should prevent scratches anyway
Click to expand...
Click to collapse
Dragontail should prevent scratches, I'm more concerned about drops because the backing of the phone is a tad bit slippery based on a few reviews.
that case don"t look that bad,,how about tempered glass?
Ended up buying a cheapo case from eBay as well as the official case from Alcatel's website. The weird thing about the website is that it doesn't allow you to put anything into your shopping cart until you create an account.
Very good
macallik said:
Ended up buying a cheapo case from eBay as well as the official case from Alcatel's website. The weird thing about the website is that it doesn't allow you to put anything into your shopping cart until you create an account.
Click to expand...
Click to collapse
Don't suppose you'd share which case you purchased and was it from overseas? I'm trying to find a cheap transparent hard back case but would consider others....I'm trying to avoid having to wait 30+ days for a case from overseas when my phone should be here in a week or so.
Also does anyone have suggestions for a rugged leather belt holster? I'm unsure what other model phone's have a similar enough footprint as there don't appear to be any out for the idol 3 yet.
famewolf said:
Don't suppose you'd share which case you purchased and was it from overseas? I'm trying to find a cheap transparent hard back case but would consider others....I'm trying to avoid having to wait 30+ days for a case from overseas when my phone should be here in a week or so.
Also does anyone have suggestions for a rugged leather belt holster? I'm unsure what other model phone's have a similar enough footprint as there don't appear to be any out for the idol 3 yet.
Click to expand...
Click to collapse
My original post has a link to the eBay purchase from overseas (China) that I made. Other than that, I got the translucent hard case directly from Alcatel. Neither have arrived yet. If you are in a hurry, the original post I made (LK case from Amazon) apparently ships quickly. I saw a few people on reddit/slickdeals who said that they have received their cases already. Also, I'd dig deeper into Amazon if you are interested in a belt holster. I may have seen one or two of those on there but I didn't post it up since I don't wear belt holsters.
My $3.99 eBay case came in the mail yesterday (7 days after placing my order). I might cancel my $11 official shell case order from Alcatel because this looks like it'll do the trick. Gotta get the phone and see how it feels first I suppose, but I like the feel of the matte on the back as well as how the translucent sides contrast the matte back. Makes it look less cheap than a completely translucent model. Also, no company labeling on the case which is something that turned me off of the LK cases on Amazon.
The dual layer lightning knight or whatever one doesn't fit right for me.
I'm happy w/ the frosted clear Lightning King case. The fit is perfect, and the buttons function very well. TPU cases I'e had on old phones always made actuating the buttons difficult, but not this one.
I'd really like a transparent TPU case, but I think the official Alcatel one plastic rather than TPU, since it's a "shell".
Amazon cacnceled official case order
I had pre-ordered the official Alcatel transparent case from Amazon, today got notice from Amazon that they have to cancel the order. Amazon status now shows not available. Anyone actually manage to get one of these cases, from Amazon or direct from Alcatel?
Related
Otterbox Commuter Case
Samsung Galaxy Note
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before I begin...
Otterbox is renowned for their premiere armor-like phone cases. I have owned many phones and two of which I put Otterbox phone cases on. Outside of Otterbox cases, I have tried countless cases at a variety of prices and quality. Some cases are pretty good, but none have the same appeal, protection, and reputation that Otterbox does. Upon unboxing the Otterbox commuter case, I discovered both international and US versions of the phone screen protectors. And, in the photos I have uploaded, you'll see that I actually have the international Note screen protector instead of the US version. I'll explain later...
Both Otterbox cases I have owned (Motorola Atrix, Samsung Galaxy Note) are very similar to each other. Even though my Atrix had a Defender case and the Note now has the Commuter case, both actually give the same feeling of protectiveness, look, and feel. When I first put the Defender case on my Atrix, I immediately knew that Otterbox will be the case for all my phones in the future. Otterbox makes a plethora of cases for many makes and models of cellular phones, so I knew that we would eventually get these bad boys. I received mine yesterday and immediately ditched my previous case for the only case my Note will have protect it again.
Also... In my opinion, Otterbox cases speak for themselves and don't need actual reviews, just someone saying, "Go buy it now. You won't regret it."
The Look...
One word to describe this case would be: Armor. The way this case looks with the polygonal insets to connect the soft silicon to the hard shell casing gives it a great look. There are slotted cross dashes on the back of the case with Otterbox's logo near the bottom. The classic sloped front fit around the screen is also present with this Otterbox case. Everything about this case is sleek, stylish, and protective. Great looking case.
Defects? What defects... There were no defects present on this case, nor were there on my first Otterbox case. I expect this type of quality from Otterbox. If anyone has experienced defects with their Otterbox case, please comment and give some insight on the customer service portion of the Otterbox company.
The Fit...
Putting this case on the phone was more trouble than I thought it would be, but I welcomed it, since every other case I had up to now had yet to give me the right fit I was looking for. After about 30 seconds of initial fitting, the case is on and the fit is amazing. The tightness of the fitting of this case is great. It gives a great secure feeling to the phone that no other case has provided.
The power buttons and volume buttons are covered by solid elevated silicone, which provides just enough resistance to where it wont accidentally be activated by walking or bumping into things from within the pocket of your pants. The 3.5mm and phone charger inputs are covered by silicone flaps that are inset into the case. Both inputs are large enough to provide the physical connections with the cords without being obstructed by the case. The spen opening is generous and allows for easy removal. The speaker has an opening through the case as well.
The protection...
Apart from the protection that the case itself provides, Otterbox provides a screen protector (for both versions of the note) as well. Pretty straight forward screen protector, two films surrounding the outer and inner surfaces of the protector. It comes with a small microfiber wiping cloth and the squeegee for those pesky air bubbles. I started with the US version of the screen protectors (duh) but for some reason, i got dust on the protector itself and it was just a mess from the beginning, so I went ahead and put the international one on. The only difference between the two protectors is the cutout on the bottom of the international one. Looks a little odd, but it works.
Conclusion...
My overall experience with Otterbox has been great. Both cases I have owned have been of the utmost quality. No other case provides me with the look, the feel, and the protection that Otterbox has given me with their cases. I am very pleased with this case and highly recommend it to anyone.
not to point fingers.... but do you work for otterbox? Just never seen someone go through so much effort on a review as far as the layout goes, if you dont work for them i think the effort is awesome.
No I don't work for otterbox... but I may have put more effort into this than I think was needed, lol
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Can you take pictures of the empty case next to the note so we can see how much bulk it adds?
How sticky is it when you pull it out of your pocket?
What is the responsiveness related to the cover and the s-pen?
SteveSlimer said:
Can you take pictures of the empty case next to the note so we can see how much bulk it adds?
How sticky is it when you pull it out of your pocket?
What is the responsiveness related to the cover and the s-pen?
Click to expand...
Click to collapse
Ill see what I can do about the pictures. As far as the stickiness of the case... its actually pretty smooth. Comes out of the pocket pretty easily. The spen has great responsiveness to the screen with the screen protector on. No difference as far as I can tell with the screen protector.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
I had an Otterbox Commuter on my late Dell Streak and it was really good but a little bulky. And it didn't have a cradle! On my Note I have Seidio Active with a kickstand and cradle, and I should say it's more elegant and compact with same level of protection. Just my two cents...
Sent from my SGH-I717R using Tapatalk 2
Nice review.
When the case is on, do you find any added resistance when putting the phone in or taking it out of your pocket? Thanks.
I have been looking for a case for my note for a long time. This one looks pretty damn nice. Do you have a link on where to buy it from?
gsharp63 said:
I have been looking for a case for my note for a long time. This one looks pretty damn nice. Do you have a link on where to buy it from?
Click to expand...
Click to collapse
I just ordered yesterday .
Below is the link.
http://www.ebay.com/itm/190674235355?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_4039wt_1163
ajsam4u said:
I just ordered yesterday .
Below is the link.
http://www.ebay.com/itm/190674235355?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_4039wt_1163
Click to expand...
Click to collapse
This one is a touch cheaper, and the seller has a better rating.
http://www.ebay.com/itm/Otterbox-Sa...ccessories&hash=item4603e450e4#ht_6112wt_1106
tonyc0642 said:
This one is a touch cheaper, and the seller has a better rating.
http://www.ebay.com/itm/Otterbox-Sa...ccessories&hash=item4603e450e4#ht_6112wt_1106
Click to expand...
Click to collapse
Man ... U saved 3 Cents .. Hehehehe
Great case
I just bought this case a few days ago. All i can say that it is a very sturdy and rugged case. I would have opt of the defender for about $15 more but they did not have it in stock so I got the commuter.
Overall a solid case. Definitely recommend
Scythe024 said:
not to point fingers.... but do you work for otterbox? Just never seen someone go through so much effort on a review as far as the layout goes, if you dont work for them i think the effort is awesome.
Click to expand...
Click to collapse
right lol
his post looks like its to be presented to the masses lol
much props to him for taking the time to do that
ajsam4u said:
Man ... U saved 3 Cents .. Hehehehe
Click to expand...
Click to collapse
Honestly the three cents is inconsequential. It could have been a couple dollars more and I still would have gotten it simply because the seller is SpigenSGP (who also happen to make the best crystal clear screen protectors I've ever used), and they have a 100% seller rating.
Nice review. Any problems with dust particles on the silicon portion of the case when pulling the Note out of a pocket? With other cases that has been my experience and the look of the case decreases due to it.
mbnocx said:
Nice review. Any problems with dust particles on the silicon portion of the case when pulling the Note out of a pocket? With other cases that has been my experience and the look of the case decreases due to it.
Click to expand...
Click to collapse
you get some dust but for me it was on the outside of the case. I got my commuter off amazon for half price! I dont think it makes it bulky like the other Otter box case but it makes it have a good feel in the hand. without it the phones feels slippery.
Just ordered me a Otterbox for $7
From where?
charlieb620 said:
Just ordered me a Otterbox for $7
Click to expand...
Click to collapse
Yes please do tell
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
There was 5 available but they all sold for $7. The seller fb was excellent as far as selling otterboxes for Samsung phones. Talked to the seller before I pulled the trigger. He said they are bought in bulk with little to no packaging. I will be doing a review in here of it's condition.
View attachment 1678077
View attachment 1678078
Sent from my SGH-T879 using xda premium
Because this isn't a main stream phone, from what I can see, the choice of cases out there are really slim.
I bought a cheap case off ebay, which is ok, but i'm not terribly happy with. The case is from taipo212 on ebay, the 'rubber hard coating skin case'. It fits well and looks pretty good initially, but marks too easily due to the matte/rubber like material. It also came with a couple small marks already on it. However, I needed a case till I find the perfect case, and it was cheap.
I'm waiting on another case from ebay, which I will comment on when I receive it. A 'clear hard tough case' from 'yousave-au'. Would love to hear from anyone that has this already.
I couldn't find a generic cases thread for the mega 6.3, so I think this thread would be a big help to lots of people.
Can anyone who has a case comment on if the case is good, where you got it from etc, even people with bad experiences, if they can let us know, so we know what cases to avoid
I just ordered one of these from eBay UK for £1.99 with free screen protector. I like these ones as they are cheap and durable, it protects the whole phone and I have been using the same type of case for my Nexus 7, Original Note, Lg L3, and Galaxy Tab 2 7.0 with no problems.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There are lots of generic cases available for the Mega 6.3 and in my experience they are quite good. Here are some ultra thin ones, I have tried this type of case on my original Note but didn't like it as the top and bottom of the phone are exposed to scratches.
These ones are advertised as Hydro Gel Rubber, whatever that means. I have also tried this with my original Note but after a few months it became loose and I went back to the S Line type case.
I use the S-Line and like it alot.
The phone is still slim and the texture is such that it doesnt hang up inside your pants front pocket when I pull it out..
Comes out and goes in smooth and is not slippery feeling like it will squirt out of my hand..
Im impressed. Just the features that I like..
EXCEPT.... one gripe.. I want the button covers removed. I want to feel and press the actual button and not the rubber button bumper..
I have a NillKin snap-on hard case (in black) for mine. This is quickly becoming my case of choice for all my phones - it's classy and maintains the thin waistline. It doesn't provide all-round edge protection though, so you need to be a bit more careful I also have a generic snap-on clear case, which looks alright but sits hard against some patches of the back, making it look a little cheap lol.
@gx3k can you please share the ebay link you order these cases from
Warnahly said:
@gx3k can you please share the ebay link you order these cases from
Click to expand...
Click to collapse
These are some slim/flip cases available on eBay UK (click on the pics for the link):
Ordered this one for £11.99 with the usual 'free' screen protector and stylus http://www.amazon.co.uk/SAVFY-Samsu...UTF8&colid=2CUOJPFBQAJ7A&coliid=IO8B31VIVJJN5
It looks ok and will do till something better comes along.
I like the TPU plastic cover. It protect my phone some time when I drop it.
Troute said:
Ordered this one for £11.99 with the usual 'free' screen protector and stylus http://www.amazon.co.uk/SAVFY-Samsu...iew cutout and also without the magnet flap..
Click to expand...
Click to collapse
cheap mega 6.3 leather case
leetrevor81 said:
Because this isn't a main stream phone, from what I can see, the choice of cases out there are really slim.
I bought a cheap case off ebay, which is ok, but i'm not terribly happy with. The case is from taipo212 on ebay, the 'rubber hard coating skin case'. It fits well and looks pretty good initially, but marks too easily due to the matte/rubber like material. It also came with a couple small marks already on it. However, I needed a case till I find the perfect case, and it was cheap.
I'm waiting on another case from ebay, which I will comment on when I receive it. A 'clear hard tough case' from 'yousave-au'. Would love to hear from anyone that has this already.
I couldn't find a generic cases thread for the mega 6.3, so I think this thread would be a big help to lots of people.
Can anyone who has a case comment on if the case is good, where you got it from etc, even people with bad experiences, if they can let us know, so we know what cases to avoid
Click to expand...
Click to collapse
I purchased a cheap leather mega 6.3 stand case on Amazon uk - 4 colors available : black white blue green grey pink, just search "allreli mega 6.3 case" on Amazon uk
Got my new case today,it's extra slim
gx3k said:
Got my new case today,it's extra slim
Click to expand...
Click to collapse
I like your case... I also like how the button holes are cut out exposing the buttons.
I have a TPU case like yours but the buttons are covered.
Where did you get your case??
Can you link us to your sweet case...
Is it flexible, TPU or a stiff plastic??
thanks...
jimmbomb said:
I like your case... I also like how the button holes are cut out exposing the buttons.
I have a TPU case like yours but the buttons are covered.
Where did you get your case??
Can you link us to your sweet case...
Is it flexible, TPU or a stiff plastic??
thanks...
Click to expand...
Click to collapse
Click the photo for the link:
It's stiff plastic for only £1.29 but it's from Hong Kong so it takes weeks to arrive.
I have the Poetic Atmosphere Case, very nice fit and looks great!
http://www.amazon.co.uk/gp/product/B00DH9AAV0/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1
Just got one of these http://www.ebay.co.uk/itm/290945411155
The "Army Green" version, it's really a very dark brown like oiled leather or hunter leather. It has the same look and feel as a wallet I bought from Amazon UK (Visconti Hunter) though of course it's not leather.
There's no go to sleep magnet in it but that was easily fixed. It's a third of the price of the last case I bought and feels much nicer in the hand, the inner phone holder part is hard plastic not tpu and is open at either end with cut outs for the volume and power buttons.
Troute said:
Just got one of these http://www.ebay.co.uk/itm/290945411155
The "Army Green" version, it's really a very dark brown like oiled leather or hunter leather. It has the same look and feel as a wallet I bought from Amazon UK (Visconti Hunter) though of course it's not leather.
There's no go to sleep magnet in it but that was easily fixed. It's a third of the price of the last case I bought and feels much nicer in the hand, the inner phone holder part is hard plastic not tpu and is open at either end with cut outs for the volume and power buttons.
Click to expand...
Click to collapse
I have got one and while it is very good it worn quite quickly and will no longer "stand" up in landscape mode. I paid about $9 and am happy with I got.
ROCK M6.3 case is good choice, the classic s view flip cover with a replacement hard PC battery cover for the official plastic....
http://www.galaxymegacase.org/samsu...leather-cover-case-for-galaxy-mega-6-3-black/
Does it actually keep the display on all the time?
juzz86 said:
I have a NillKin snap-on hard case (in black) for mine. This is quickly becoming my case of choice for all my phones - it's classy and maintains the thin waistline. It doesn't provide all-round edge protection though, so you need to be a bit more careful I also have a generic snap-on clear case, which looks alright but sits hard against some patches of the back, making it look a little cheap lol.
Click to expand...
Click to collapse
I have ordered a brown Nillkin for my white Mega.
Got my new case today, same as my blue ultra slim case but I got black.
I'm considering getting one. Anyone else?
http://www.otterbox.com/Defender-Se...Galaxy-Note-Pro-12.2/77-42603,default,pd.html
Wow that's about the cost of a 3 year squaretrade warranty with accidental coverage ($125 with a 35% off coupon code floating around).
My recommendation - go for the i-Blason
Hi
It looks amazing but if you are looking for something less expensive, I would recommend the "i-Blason Armored Dual Layer Hybrid Full-body Protective Cover with Kickstand and Impact Resistant Bumpers".
(search on Amazon)
amazon.co.uk/gp/product/B00IT3UBX6
That's what I got and it was a great choice!
It's an high quality product and gives you the same protection that you are looking for...
regards
Ray
I have one on my iPad. I have been waiting for them to come out with one for the Note, but the price is very off-putting. $99 is pretty much my limit.
The Otterbox is $120.00. The i-Blason is $49.95 and it looks very close to the Otterbox. This One is $14.95 and is the exact same thing as the i-Blason. I've ordered one - I'll let you know how good it is when I get it.
Just don't expect the same specs in terms of impact resistance as an Otterbox when buying a cheaper variant.
I'm debating getting the Otterbox. My past experiences with their products are excellent, and this thing feels quite fragile. It does look massive, though...
Mrktmind said:
The Otterbox is $120.00. The i-Blason is $49.95 and it looks very close to the Otterbox. This One is $14.95 and is the exact same thing as the i-Blason. I've ordered one - I'll let you know how good it is when I get it.
Click to expand...
Click to collapse
I have the iblason one. It was well worth the investment.
I'm sure the otterbox may be a bit better, but I'd rather have the iblason+square trade warranty for about the same price of just the otterbox.
Mrktmind said:
The Otterbox is $120.00. The i-Blason is $49.95 and it looks very close to the Otterbox. This One is $14.95 and is the exact same thing as the i-Blason. I've ordered one - I'll let you know how good it is when I get it.
Click to expand...
Click to collapse
I had one of those for my 10.1. Wasn't worth the 15 bucks.
Sent from my SM-P900 using Tapatalk
Just got the $15 I-Blason version. Overall the case is very similar to my otterbox's with one exception.
The I-Blason doesn't come with the built-in screen protector like otterbox's do. I like the otterbox's screen protector because it doesn't actually adhere to the screen. Oh well it was worth the try.
This case
http://www.amazon.com/LV-Resistant-...3286182&sr=8-11&keywords=galaxy+note+pro+case
Is about the same as the I-blason. It has good reviews too and is also cheaper.
hanbaoquan15 said:
This case
http://www.amazon.com/LV-Resistant-...3286182&sr=8-11&keywords=galaxy+note+pro+case
Is about the same as the I-blason. It has good reviews too and is also cheaper.
Click to expand...
Click to collapse
I got this one. Not terrible, but I'll still be getting the OtterBox.
muzzy996 said:
Wow that's about the cost of a 3 year squaretrade warranty with accidental coverage ($125 with a 35% off coupon code floating around).
Click to expand...
Click to collapse
To each his own. I prefer to prevent damage before it happens.
*Omnipresent* said:
To each his own. I prefer to prevent damage before it happens.
Click to expand...
Click to collapse
Oh don't get me wrong, just because I have a squaretrade warranty doesn't mean my tablet is unprotected. I'm on my second note pro, the first was crushed in a hundred pieces (don't ask). Day 1 of the second note pro consisted of taking it out of the box, installing a tempered glass screen protector and slipping it into a folio case (belkin) before registering it with squaretrade. If I'm stupid enough to make the same mistake twice i'll do my best to scoop up the pieces and file a claim lol.
I'm not against the otterbox, I think their cases are fantastic and I wouldn't mind having one. Certainly the way to go when you need something rugged, but $120 is kind of pricey. I hope they bring the price down to below $100 on that thing before it ships. Hard to believe that it should cost that much.
Just ordered the Note 12.2 defender case from otterbox. I'll post a short review in a couple of days after receiving the case.
I just got the gumdrop hideaway case from amazon.Its just like the otterbox case with screen protector. And u can even use it without the screen. Protector if u don't like it plus has a stand built right in.I have had otterbox and like them but 120 is nuts.http://www.amazon.com/gp/product/B00IVEHYRE/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1.Its 69.00 now but I got it when it was 42.00.Its great a little heavy with the bulk but not bad.
*Omnipresent* said:
Just ordered the Note 12.2 defender case from otterbox. I'll post a short review in a couple of days after receiving the case.
Click to expand...
Click to collapse
Did you get the case yet? If so could you upload a few pics of it installed and what you think of it.
Thanks!!!
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button.
FedEx delivery of the case is for this Monday, before 4:30pm EST. Rest assured, there will be plenty of pics to go along with my review.
Just got the Otterbox Defender case for my Note Pro 12.2, with a bonus dry box case. For $119.95 i expected an extremely impact resistant case. Needless to say, Otterbox did a masterful job.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The case is made up of 4 pieces. 3 high impact plastic parts and 1 very thick and heavy rubber sleeve. Once fully assembled, your note 12.2 is transformed into a most impressive road warrior.
Snapping the first 2 parts that compose the inner is case easy, just line up the ports and press down firmly until all the locking tabs engage. The screen protector rests about 1-2 millimeters above the screen, makes swipe gestures and screen taps easily, with no trampoline effect.
After that, grab that thick rubber sleeve and wrap it around your Note Pro, until all the ports are sealed up nice and tight.
Then place it securely in the outer case/stand and your done.
Hey there! Thank you for the review and pics!
I noticed on the otterbox page it lists this case being for the note pro 12.2 and the tab pro 12.2
I'm trying to figure out how it can work for both tablets when only 1 has spen.
My question is... can you access the spen from the case? It looks like it is accessible from the rubber part of the case but that the final piece snapped on covers it?
And, what the heck? People who buy it for a tab 2 just have an extra hole with no purpose but it's ok because the last piece covers it anyway?
I can't quite tell from the pics and info is very scarce on these! Best buy has it listed on their page but sold out online for $109 however it only lists it as being for the tab pro 12.2.
Strange indeed.
Once you place the note in the outer case/stand, you can NOT access the s-pen. I would assume otterbox would omit the spen access port on the tab pro but i cant say for sure. In the second part of this review, i will go over some more features and specs. For instance, there are several useful positions you can use. The manual shows most of them.
Be aware that once fully assembled the defender case effectively triples the overall weight to over 1500g or 3.2 pounds. Its heavy but feels supremely secure.
Here are the most useful landscape positions. Perfect for lap use, Extremely stable. The are 2 portrait positions as well. The wedge effect otterbox uses to secure your note in the stand is very effective. I never felt as if the entire setup would tip over and fall. And if it falls, so what. The complete package feels like it could survive a fall down a mountain lol.
The hinge otterbox uses is very sturdy plastic and folds flat when not in use, allowing you to place your note pro in the case, face up or down. And yes the defender case increases the thickness to about 1 1/4 inches.
So far I've tried over 7 cases and this is the THINNEST case you can get for the S7 and it offers full coverage. It is like having a nearly bare phone. The dot pattern on the back is great because it prevents the glass from sticking to the plastic giving it that wet look. The case I got has a great fit and the front lip hugs the phone well on all sides. If you are looking for a clear phone to really show off the galaxy s7 while having the least amount of bulk possible this is the case to get, not to mention it is only $4.98 on Amazon. You can check the case HERE on some angles you can't even tell there is a case on the phone.
If you need drop protection and need an otterbox type of bulk protection this is definitely not for those users, but for those who just want the least amount of bulk w/ a bit of protection and full coverage around the bezels, this is a great little case.
I just got the spigen thin fit (exact fit). it looks just as thin as the above case and also is open on top and bottom so becomes even more minimal. for those that care about protecting the back glass but not parts of the frame. got it on sale for $5 plus shipping...
http://www.amazon.com/Galaxy-Spigen®-Exact-Fit-Premium-Samsung/
Does the wireless charging work through both of these cases?
ITNV said:
Does the wireless charging work through both of these cases?
Click to expand...
Click to collapse
It was working in most cases in S6 Edge. I think it will also work in S7.
ITNV said:
Does the wireless charging work through both of these cases?
Click to expand...
Click to collapse
dont have my s7 yet but i assume it should still work, i have had similar cases on my nexus 5 and the qi charging still worked...
Thanks for finding this OP, I just ordered one. I am not usually a case guy and tend carry my phones naked with just a carbon fiber skin added for grip. But with the S7 and its rounded back not proving well so far in early drop tests, I am looking for the thinnest case possible - already ordered 3 of them.
The Spigen looks great, but I'd prefer the tops to be covered also if I am going to have a case on. When phones fall, the top bezel usually gets nicked. (ask my S6E )
OP - Does the packaging say how thin this case is in mm? I got the Spigen Clear Crystal that's supposedly 0.5 mm, another on eBay that's supposedly 0.3mm and have also seen others on eBay that claim 0.2 mm. Curious.
nolook said:
I just got the spigen thin fit (exact fit). it looks just as thin as the above case and also is open on top and bottom so becomes even more minimal. for those that care about protecting the back glass but not parts of the frame. got it on sale for $5 plus shipping...
http://www.amazon.com/Galaxy-Spigen®-Exact-Fit-Premium-Samsung/
Click to expand...
Click to collapse
This is my daily case and I actually wrote a review on Amazon about it. Love this case.
shaq1907 said:
It was working in most cases in S6 Edge. I think it will also work in S7.
Click to expand...
Click to collapse
The wireless chargers work through Otterboxes, so yeah as long as the case is not metallic or ridiculously thick it will still work.
I got my gmyle case the OP told us about and put it on today. I am very impressed. Truly a slim case, it's thin enough to show off the curved back glass. I have 2 more coming in the mail, but this one's the best of the 2 I have tried so far (Spigen clear crystal before this and the gmyle is way better, way thinner).
Thanks for sharing OP.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Where did you buy it from? Could you post a link please ?
Corbu said:
Where did you buy it from? Could you post a link please ?
Click to expand...
Click to collapse
http://www.amazon.com/gp/product/B01B5SDQ6U?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00
Thanks, bud sadly that seller does not ship to Canada and there are none on eBay yet.
Corbu said:
Thanks, bud sadly that seller does not ship to Canada and there are none on eBay yet.
Click to expand...
Click to collapse
I ordered this one a few weeks ago http://www.ebay.com/itm/291687582792?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Looks similar except for the camera cutout, in some of the pics it does look pretty slim and it also look like it has a curve on the back. It should be here any day now.
I got the red shield slim case.
To bad I didn't stumble upon this thread sooner.
Looks similar to the gmyle peachpuff. For reference, here are two other slim cases I ordered - note the ebay one says "0.3 mm" ? If you search hard enough on ebay, you can now find as low as "0.2 mm" thickness. The Spigen TPU case for comparison is 0.5 mm.
The eBay one and the bomea one haven't gotten here yet. My idea for the bomea hard case is to wrap it in carbon fiber slick wraps which I already have waiting. But the bomea hard case is not thin enough to show off the curved back, which is a bummer.
We will see, but so far I am extremely happy with the gmyle case. Never been a case guy (always carried the phones naked with just a slick wrap) but with a case as thin as this one, the benefits of having a case outweigh the disadvantages.
http://www.ebay.com/itm/37156471176...49&var=640584606813&ssPageName=STRK:MEBIDX:IT
http://www.amazon.com/gp/product/B01AE3ZLUG?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
xxaarraa said:
Looks similar to the gmyle peachpuff. For reference, here are two other slim cases I ordered - note the ebay one says "0.3 mm" ? If you search hard enough on ebay, you can now find as low as "0.2 mm" thickness. The Spigen TPU case for comparison is 0.5 mm.
The eBay one and the bomea one haven't gotten here yet. My idea for the bomea hard case is to wrap it in carbon fiber slick wraps which I already have waiting. But the bomea hard case is not thin enough to show off the curved back, which is a bummer.
We will see, but so far I am extremely happy with the gmyle case. Never been a case guy (always carried the phones naked with just a slick wrap) but with a case as thin as this one, the benefits of having a case outweigh the disadvantages.
http://www.ebay.com/itm/37156471176...49&var=640584606813&ssPageName=STRK:MEBIDX:IT
http://www.amazon.com/gp/product/B01AE3ZLUG?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
Click to expand...
Click to collapse
OK guys, the "bomea" case came in, and it is gorgeous!
It doesn't protect the top and bottom, but I think I am OK with it, since the back glass seems to be the most fragile part of this phone (from drop tests so far).
Not covering the bottom means that it fits within the Gear VR perfectly. Which is an added bonus.
It is even thinner and less obtrusive than the "gmyle" case if that's possible.
It does show the curved back, which I was not expecting so that's a bonus.
It feels really nice in the hands too (soft texture). bomea and the gmyle are both keepers.
Bought an unbranded case identical to that for $1.40 from ebay
peachpuff said:
I ordered this one a few weeks ago http://www.ebay.com/itm/291687582792?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Looks similar except for the camera cutout, in some of the pics it does look pretty slim and it also look like it has a curve on the back. It should be here any day now.
Click to expand...
Click to collapse
Has that ebay case arrived? For $1 plus free shipping, you can't really beat that. Looks just as thin as the case mentioned from Amazon
I'm using the Ringke Slim. Had one on a previous S4 and really liked it. Super thin but enough of a lip to elevate the screen when flipped over on a desktop.
I had ordered one of the $ .99 TPU cases from eBay but that may be weeks until it shows up.
http://www.amazon.com/gp/product/B01ACAUFR0?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
gleggie said:
Has that ebay case arrived? For $1 plus free shipping, you can't really beat that. Looks just as thin as the case mentioned from Amazon
Click to expand...
Click to collapse
I checked today but all i got was bills, damn postman.
Hey just wanted to give my two cents on the Spigen Tough Armor case.
I am a long term Spigen user and have yet to find a case from them that has disappointed, this one certainly keeps that reputation going!
For its price the quality is unbeatable, all the ports are cut accurately and generous enough to accept standard chargers and headphones. The buttons still have that awesome pixel tactile feeling as well. The only con I would give it is I wish the material of the initial layer would be a bit more rubbery to better absorb impacts, it feels closer to a hard plastic than a rubber.
With the two part construction and beefy corners protection is certainly up there with the best, keep in mind it is not minimalistic case and will add a decent amount of bulk, there are drawbacks to protection but I feel this case is a good medium ground between keeping the sleek look of the phone while maximizing durability.
ALSO; the kickstand is an awesome bonus that I never knew I can't live without. It stands the phone in the horizontal position at two different angles.
Here's the link I purchased it from (Amazon Canada, sorry)
https://www.amazon.ca/dp/B07MJ7V5PB/ref=pe_3034960_233709270_TE_item
Let me know if you've got any other questions!
Cheers
T-frizzy said:
Hey just wanted to give my two cents on the Spigen Tough Armor case.
Here's the link I purchased it from (Amazon Canada, sorry)
https://www.amazon.ca/dp/B07MJ7V5PB/ref=pe_3034960_233709270_TE_item
Let me know if you've got any other questions!
Cheers
Click to expand...
Click to collapse
Thanks. Here's the US link.
T-frizzy said:
Hey just wanted to give my two cents on the Spigen Tough Armor case.
I am a long term Spigen user and have yet to find a case from them that has disappointed, this one certainly keeps that reputation going!
For its price the quality is unbeatable, all the ports are cut accurately and generous enough to accept standard chargers and headphones. The buttons still have that awesome pixel tactile feeling as well. The only con I would give it is I wish the material of the initial layer would be a bit more rubbery to better absorb impacts, it feels closer to a hard plastic than a rubber.
With the two part construction and beefy corners protection is certainly up there with the best, keep in mind it is not minimalistic case and will add a decent amount of bulk, there are drawbacks to protection but I feel this case is a good medium ground between keeping the sleek look of the phone while maximizing durability.
ALSO; the kickstand is an awesome bonus that I never knew I can't live without. It stands the phone in the horizontal position at two different angles.
Here's the link I purchased it from (Amazon Canada, sorry)
https://www.amazon.ca/dp/B07MJ7V5PB/ref=pe_3034960_233709270_TE_item
Let me know if you've got any other questions!
Cheers
Click to expand...
Click to collapse
Plus one. I had the tough armor for my v30. I was so happy with it I bought the pixel 3a xl version. I'm happy.
Since I got the purple-ish phone I wanted a clear case. The spigen liquid crystal is really nice. I normally hate cases, but I would rather be safe than sorry lately. So, using that and the LK branded screen protectors. Both work brilliantly together to offer great protection!
frozeninferno said:
Since I got the purple-ish phone I wanted a clear case. The spigen liquid crystal is really nice. I normally hate cases, but I would rather be safe than sorry lately. So, using that and the LK branded screen protectors. Both work brilliantly together to offer great protection!
Click to expand...
Click to collapse
I just received mine this weekend--crystal clear. I really like it. I normally just use a skin to give it grip but decided to try this one even though it took about 2 wks to arrive. My son got the "rugged" version and is very happy with it. On both (and maybe any case), we get a more accurate first-time fingerprint read . I really missed the back-reader when I went to MOTO Z3 P, so looked forward to this one. Being a little smaller, it doesn't seem to read as easily as the N5X or N6P, but these cases seem to put the finger where its needed.
The Spigen liquid crystal presents a nice fit--no gaps--esp around the headphone jack as other clear covers I'd tried in the past. It's easy to get on/off but still sturdy with a cushiony feel. I'm sure this isn't a case for "droppers." We still haven't settled on a screen protector.
ritchea said:
I just received mine this weekend--crystal clear. I really like it. I normally just use a skin to give it grip but decided to try this one even though it took about 2 wks to arrive. My son got the "rugged" version and is very happy with it. On both (and maybe any case), we get a more accurate first-time fingerprint read . I really missed the back-reader when I went to MOTO Z3 P, so looked forward to this one. Being a little smaller, it doesn't seem to read as easily as the N5X or N6P, but these cases seem to put the finger where its needed.
The Spigen liquid crystal presents a nice fit--no gaps--esp around the headphone jack as other clear covers I'd tried in the past. It's easy to get on/off but still sturdy with a cushiony feel. I'm sure this isn't a case for "droppers." We still haven't settled on a screen protector.
Click to expand...
Click to collapse
Oh trust me, you can drop your phone with this and it will be very well protected. I have used the "rugged" they call on the Pixel before and even that was plenty of cushion for quite a few drops on my S8+ (for the S8+, it was not called the rugged case). Don't be too worried, all of their cases are very protective and that is why I trust them. Wife and I both use Spigen, she always has iPhones and I have Androids and we have never had issues. Fitment is always amazing and protection is great as well.
If you can, get the LK screen protectors. Got mine from Amazon. They fit nicely and do not go too far out to the edges, "case safe." It was also pretty easy to install and it comes in a pack of 3.
Edit: if you ordered from either Spigen or Amazon, these cases had to be put in stock as this is a new phone. Normally it does not take long to receive items at all. I prefer ordering through Amazon because you get the Spigen items at a huge discount.
Have this case as well. I initially got a very cheap (less than 5 bucks) case while waiting for this to become available. I've stuck with Spigen ever since my Galaxy S5 and they never disappoint. These are always tough, sleek with a non-obnoxious design, and don't ruin the ability to easily get the phone in and out of your pocket.
This case is great! It's the one I am using.
I bought 3 cases for the P3aXL.
Spigen Tough Armor
Incipio
NiuBox Armor Slim Fit Dual Layer
Spigen was very good. Didn't like the feel of the buttons.
Incipio was a POS fingerprint magnet. Sucked
NiuBox is great!.I love the buttons and the textured feel of the case! It has chrome buttons that look really nice. They really stick out a lot and are so easy to use. The fingerprint reader is angled slightly down. I like it this way. Kept this case and returned the other 2.
Case currently not installed. Waiting on a sim card from Tello.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.
Got the sim card in. I love the way this case feels in my hand! Feels like there is no case on. Buttons are the best! Funny it has a 30 day warranty. We will see
Here updated pics with phone in case:
These are clickable images for high rez images:
;
This is what I purchased for mine.. Pixel 3a/ 3a XL | Spigen® [Rugged Armor] Matte Black Shockproof Slim Case Cover. I personally would have purchased a Tech21, I think they are great as well.. Had one for the Note4 back in the day. But Spigen will be my first ever from them.. So far nice easy to put on and fits like a glove.. The way a case should fit.
I get the wanting a case design that you're used to - in my case. it's the SUPCASE UNICORN BEETLE PRO. I have one for the Galaxy S7 Snapdragon (that my incoming 3a XL will replace); naturally, I'll be getting one for the 3a XL. In addition to being a tank of a case at a reasonable price (even on Amazon, it's under $20USD - and that includes the clip-on belt-loop holster) the only lack is a screen-protector (which - for me - is no lack). It also can hide a color choice that you got *stuck* with. (In the case of the S7, it is an ex-Verizon Bold Gold model - complete with the Verizon logo - rather ignominious since the phone itself has T-Mobile firmware in it; therefore I went with Basic (almost "Batman") Black then - I'm sticking with the same color choice for the 3a XL - which will actually match the phone's Just Black.) The S7 is the only cell phone I've ever owned that *wasn't* black (the first cell phone I ever owned was pre-Android - a black Samsung SCH prepaid I bought at Radio Shack; the first Android phone I ever owned was a passed-down Galaxy Nexus in black) - in other words, I don't buy black phones to buck trends - in my case, buying black phones IS the trend.
I just ordered this case. Looks like it has great rubber protection just like the case I had for a Nexus 6. Dropped that N6 a quite a few time times.
https://www.amazon.com/gp/product/B07T95NS28/
.
Dixon Butz said:
I just ordered this case. Looks like it has great rubber protection just like the case I had for a Nexus 6. Dropped that N6 a quite a few time times.
https://www.amazon.com/gp/product/B07T95NS28/
.
Click to expand...
Click to collapse
It is not soft rubber. I don't like that case. Hate the volume buttons. Did not put it on.
Still my favorite! :
https://forum.xda-developers.com/showpost.php?p=79808697&postcount=10
https://www.amazon.com/gp/product/B07SH8TKF9/
.
I grabbed one as well for my 3a XL, love this case. The only con I can think of is it's hard to find the volume buttons sometimes. The power button is textured which makes it easy to feel it.
I had an Axon 7 for the past 3 years, used nothing but the cheapest cases with a kick stand. This Spigen case feels a lot more premium and looks great.