[ROOT][TWRP]Samsung Galaxy Tab A SM-T550/T555/P550/P555/T350/P350/T355/P355 - Samsung Galaxy Tab A series ROMs, Kernels, Recover

Port of CF-autoroot for the Tab A and Tab A plus.
Supports all models.
See the link below for details:
http://forum.xda-developers.com/showthread.php?t=3124284
NOTE: does not support Marshmallow.
To root MM install TWRP provided below and use Supersu.
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
Flash with Odin3 v3.10.6.
Please post any feedback.
NOTE: PLEASE DISREGARD ANY OF MY POSTS WITH REFERENCES TO http://galaxy-tab-a.proboards.com/ I NO LONGER WISH TO REMAIN A MEMBER OF THAT FORUM AND HAVE REMOVED ALL OF MY DEVELOPMENT POSTS THERE. THE NEW FORUM LINK IS http://galaxy-tab-a.boards.net
SM-T550/T555/SM-P550/P555:
https://www.androidfilehost.com/?fid=23991606952613365
Stock recovery:
http://www.mediafire.com/?kxl0r5bsk75322y
SM-T350/T355/SM-P350/P355
https://www.androidfilehost.com/?fid=24052804347758647
Stock recovery:
https://www.androidfilehost.com/?fid=24052804347758669
Flash with ODIN 3.10.7 in the AP slot.
Uncheck Auto reboot.
Load the respective file above into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
Guides:
http://techchomps.com/how-to-root-the-samsung-galaxy-tab-a-9-7/
http://forum.xda-developers.com/showthread.php?p=61757996
Credits to Chainfire.
Please give feed back.
TWRP can be found here:
http://forum.xda-developers.com/android/development/recovery-t3426560
DONATE ME HERE IF YOU'D LIKE TO SUPPORT ME OR BUY ME A BEER>>>DONATE
Thanks

How's about SM-P355?

kaipro said:
How's about SM-P355?
Click to expand...
Click to collapse
Well the P version of the Tab A has SPen while the T version doesn't. I'm guessing since the hardware is similar, try the T350 at your risk.

DUHAsianSKILLZ said:
Well the P version of the Tab A has SPen while the T version doesn't. I'm guessing since the hardware is similar, try the T350 at your risk.
Click to expand...
Click to collapse
It is quite likely the same story as the tab s. T800 kernel boots on all t80x models.
As they all use the same ramdisk it should boot.

Is there a twrp image for this? I have someone on Google plus looking for one

Quote100 said:
Is there a twrp image for this? I have someone on Google plus looking for one
Click to expand...
Click to collapse
See the first link in the op.

This is for the 5.0.2 OD1 right?
Sent from my SCH-I545 using Tapatalk

ravenmk said:
This is for the 5.0.2 OD1 right?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
It doesn't matter which firmware you're running. If your model matches it will work.

ashyx said:
It doesn't matter which firmware you're running. If your model matches it will work.
Click to expand...
Click to collapse
Oh, ok. Thank you
Sent from my SCH-I545 using Tapatalk
---------- Post added at 04:57 PM ---------- Previous post was at 04:52 PM ----------
And one last question, after flashing the CF Auto Root we flash back the stock recovery?
Sent from my SCH-I545 using Tapatalk

ravenmk said:
Oh, ok. Thank you
Sent from my SCH-I545 using Tapatalk
---------- Post added at 04:57 PM ---------- Previous post was at 04:52 PM ----------
And one last question, after flashing the CF Auto Root we flash back the stock recovery?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Stock recovery is automatically flashed.

Howto
I didn't find any clear instructions on how to do this except for this french site. I tested with my SM-T550 and it worked like a charm.
Download all files as described in OP, and Odin
1. Turn off your tablet
2. Simultaneously press the keys: Volume Down + Home + Power . Then press volume up to select download mode.
3. On your computer, open Odin in administrator mode. Odin3-v3.10.6.exe in the zip file.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Connect your tablet to your computer using the USB cable. In ODIN , the box under ID: COM will be in blue when it has detected your tablet.
5. Click AP then select the file sm-t550_cf -autoroot.tar you downloaded.
6. Check the boxes that only "Auto Reboot" and "F. Reset Time" are checked (look in the "Options" tab). Make sure the box Re-Partition is not checked.
7. Start the root procedure by clicking the Start button and wait a few moments. The tablet will reboot, red android appear and some status message from the auto-root script and then restart in 10 seconds.
8. At the end of the installation, you can disconnect your tablet from your computer.
9. That's it, you are rooted

Where to get Odin3 v3.10.6?
See here: http://forum.xda-developers.com/showpost.php?p=61757996&postcount=11
Sorry for not reading the threads in this forum.

smileysjm said:
Where to get Odin3 v3.10.6?
See here: http://forum.xda-developers.com/showpost.php?p=61757996&postcount=11
Sorry for not reading the threads in this forum.
Click to expand...
Click to collapse
Here you go https://www.androidfilehost.com/?fid=95916177934550076
Sent from my SM-T800 using Tapatalk

@sinnadyr Your screen capture after step 6 is different from the .tar file I have downloaded. I have SM-t550_cf-autoroot.tar
Are these the same steps I should be using for my Samsung Galaxy Tab A (SM-P555)? I am a little confused.

I picked up a Galaxy Tab A 9.7 Wifi a few days ago i am going to be working on trying to get an aosp tree working on it.
Are there any other threads for the tab a other then the one linked in op?
Basic Tree:
https://github.com/deadman96385/android_device_samsung_gt510wifi
Kernel:
https://github.com/deadman96385/android_kernel_samsung_gt510wifi

There isnt a dedicated forum yet. Somebody needs to request for one to admin.

You should add a tag to the op so it shows up when searching for the tab a i think its
Samsung Galaxy Tab A Series

deadman96385 said:
You should add a tag to the op so it shows up when searching for the tab a i think its
Samsung Galaxy Tab A Series
Click to expand...
Click to collapse
Well from the breadcrumb below, it is rather hard to find this thread.
xda-developers > Android Development and Hacking > Miscellaneous Android Development > [ROOT]Samsung Galaxy Tab A SM-T550/P550/P555/T350/P350/P355
Should these threads be combined into a top level forum such as:
http://forum.xda-developers.com/Samsung-Galaxy-Tab-A-Series
Anyway, this is my two cents on the matter. What do you think?

smileysjm said:
Well from the breadcrumb below, it is rather hard to find this thread.
xda-developers > Android Development and Hacking > Miscellaneous Android Development > [ROOT]Samsung Galaxy Tab A SM-T550/P550/P555/T350/P350/P355
Should these threads be combined into a top level forum such as:
http://forum.xda-developers.com/Samsung-Galaxy-Tab-A-Series
Anyway, this is my two cents on the matter. What do you think?
Click to expand...
Click to collapse
It would be nice but there is a long list of devices waiting for their own forums

I've asked admin a couple of times for this post to be added to the root directory thread, but to no avail.

Related

[ROM]CriskeloRom[JKAY-ICS Theme][DD-02/28][XWKL1-Base][KH7-Modem][03/05][FINAL]

◥███◣ CriskeloRom◥███◣[JKAY-ICS Theme-BLN-CallREC][DD-02/28][XWKL1-Base][KH7-Modem][03/05][FINAL/STABLE/BATTERY FRIENDLY]​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
Folks, enjoy one of the highly rated ROMs in I9100 Forum, CriskeloRom; find all in and out information about this ROM from the link given below.
[FONT=&quot]
[/FONT][FONT=&quot]Original ROM link in I9100 Forum: http://forum.xda-developers.com/showthread.php?t=1168836[/FONT]
Before you install this ROM:
1. Take a Nandroid Backup [To keep a copy of the Backup on a PC/Mac is best practice].
2. Use Titanium Backup or Astro File Manager to backup your Apps,etc.
How to install:
***Please carefully read release notes of respective Version before flashing***
You must have CWM already installed.
1. Download Criskelo_v2.1_full.zip and place it on your SD card.
2. Boot into Recovery
3. Wipe data/factory reset
4. Wipe cache partition
5. Go to advanced
6. Wipe dalvik cache
7. Install Criskelo_v2.1_full.zip
8. Boot up phone
9. Initial Boot will take a while, please be patient.
Download links:
Version:2.1 ( Full and Final)
Thin version, please read release notes for list of removed stuff.
Link#1: https://docs.google.com/uc?id=0B9m6MUci5lmiNmNXUjJ0c1VRVFdBOF91SUhQLXZYQQ&export=download
Link#2: http://dev-host.org/GeU
Update: new file name and new download links.
reserved.
Release Notes
Version 1 [02/16/2012]
Just Hellraised, no changes to original ROM work
To install, follow “Before you install this ROM” and “How to Install” in OP.
Version 2 [02/23/2012]
Entropy’s latest Daily Driver Kernel (02182012-B)
Removed some craps to make this version light weight (FmRadio, Sns*, SevenEngine, SocialHub, PanningTryActually, LiveWallpapers, Microbesgl, Swype, WlanTest, lcdtest,CriskeloROM add-on,etc)
Fixed wifi region issues – Thanks to Entropy
If you are already on Version 1, this version does NOT need full wipe/factory reset, you can simply flash Version 2 on top of Version 1, coming from different ROM or flashing CriskeloROM first time, then follow "Before you install this ROM" and "How to Install" in OP.
[FONT=&quot]Thanks to evodon84 and micjenks for testing version 2[/FONT]
Version 2.1 [03/05/2012] <<=======[ *******FINAL RELEASE**********]
This is final version.
Default language was changed to English from Spanish ( Sorry, I heard you curse me )
Build.prop tweaks are applied and tested.
Entropy’s DD Kernel (02282012)[This is stable/battery friendly/last tested on this ROM].
Removed some more apps in addition to that of V2 (FactoryTest, alarmsolo, googlefeedback, memo, SelftestMode, Polarisoffice)
If you are already on previous versions of this ROM, this version (2.1) does NOT need full wipe/factory reset, you can simply flash Version 2.1, coming from different ROM or flashing CriskeloROM first time, then follow "Before you install this ROM" and "How to Install" in OP.
Big thanks to everyone who supported this ROM.
I'm running this right now, hellraised through flashaholics. Did you make any difference from the default Criskelo?
Thanks for sharing
Yeah for google docs
Thanks for sharing and a big thanks for using google docs to share.
It's getting hard to find stuff anymore with all the sharing sites closing their doors.
naturallyfrozen said:
I'm running this right now, hellraised through flashaholics. Did you make any difference from the default Criskelo?
Click to expand...
Click to collapse
No..this is pure CriskeloRom..with no flashaholics options like init.d ,etc selected.
Okaaaaayyyy. Never used google docs before... how do we download the rom again?
Sent from my GT-I9100 using xda premium
Said r copy of flash cards?
Sent from my SGH-I777 using Tapatalk
kamots said:
Okaaaaayyyy. Never used google docs before... how do we download the rom again?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
There is download link in OP, click on it and top right corner of the download page you will see download button.
<disregard>
Just flashed, thanks OP
Really liking this Rom so far it is super polished and has tons of features built in. Thanks OP!
evodon84 said:
Really liking this Rom so far it is super polished and has tons of features built in. Thanks OP!
Click to expand...
Click to collapse
Good to hear you liked it, meanwhile please share your experience with ROM in this thread as and when available.
Love to try this rom but cant access google docs.
gadget069 said:
Love to try this rom but cant access google docs.
Click to expand...
Click to collapse
download link is not working?
if download link takes you to download page, on top right corner you will see download button.
rav4kar said:
download link is not working?
if download link takes you to download page, on top right corner you will see download button.
Click to expand...
Click to collapse
All i get is this
The connection has timed out
The server at www.google.com is taking too long to respond.
The site could be temporarily unavailable or too busy. Try again in a few
moments.
If you are unable to load any pages, check your computer's network
connection.
If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
Click to expand...
Click to collapse
gadget069 said:
All i get is this
Click to expand...
Click to collapse
Hmm.. this is weird, I just checked and was able to download zip file, can you try it later ..or some else should confirm if it's a link issue or download/network/firewall issue at your end.
rav4kar said:
Hmm.. this is weird, I just checked and was able to download zip file, can you try it later ..or some else should confirm if it's a link issue or download/network/firewall issue at your end.
Click to expand...
Click to collapse
My phone can access it with the google doc app, but i ant figure out how to download it to the phone so i tried using my pc to download, i do have a new router that might be causing this but doubt it.
just flashed and on initial boot up. All I get is black. dunno if the phone is on or off. is this normal?
Alucardis666 said:
just flashed and on initial boot up. All I get is black. dunno if the phone is on or off. is this normal?
Click to expand...
Click to collapse
huh, it worked for me on the first try, I came from Hellraised HydroAOSP, and Shep's MIUI prior to flashing.

[PROGRAM]boot.img Flasher v1.2.1 | Updated 12.18.12

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi everyone, I wrote this simple little program to help with flashing kernels on S-ON HTC devices. The program is pretty simple and contains all of the needed files to flash your boot.img and push the necessary kernel modules, either while the phone is booted into Android or if you are stuck in a bootloop and can only get into the bootloader. The program is configured to flash a near-stock boot.img from the 2.13 base (only added init.d support) and the kernel modules for the kernel. In theory, you can replace the boot.img and modules from other kernels and flash through this program as well (more info in 3rd post)
Click to expand...
Click to collapse
Download:
v1.2.1 - For JB ONLY! https://dl.dropbox.com/u/6621763/boot-img-flasher-v1.2.1-jb.zip
v1.2.1 - For ICS ONLY! http://bit.ly/OGAGgn​
Click to expand...
Click to collapse
​
Credits:
Morto_jeffrey for some code from Venom Flasher
patensas for the icon
Click to expand...
Click to collapse
Changelog
v1.2.1 JB RELEASE- 12.18.12
Updated boot.img and kernel modules from 3.15.651.6 RUU
v1.2.1 - 10.5.12
Fix default debug mode
Fix first time run procedure
Open log.txt on exit if debug enable
v1.2 - 10.4.12
Fixed version number not showing in program or log
Download - http://bit.ly/SzWucs
v1.1 - 10.2.12
Fix code when pushing files
Added logging to diagnose issues
Don't automatically detect when in fastboot, wait for user input
Download - http://bit.ly/T0d5T1
v1 - 10.2.12
Initial Release
Download - http://bit.ly/QooZHR
Click to expand...
Click to collapse
Info​
How it works:
This program flashes whatever boot.img is placed in the "files" folder and moves whatever modules are in the "files\modules" to /system/lib/modules on your phone.
Click to expand...
Click to collapse
How to use:
Use the main menu to flash your boot.img to your phone. For most people, this will be the option they need to use. If you cannot boot (bootloop) then you need to get into the bootloader by pressing and holding power and volume down. This may take 10-15 seconds and you may see the bottom LEDs flashing in the process. In this case, please use the advanced menu to flash the boot.img (this way removes the adb steps to automatically boot into recovery, since you can't use adb if you're in a bootloop)
Click to expand...
Click to collapse
Flashing a different kernel than what is included with the program:
If you want to use this program to flash a different kernel than the stock 2.13.651.1 kernel, place the custom kernel boot.img in the "files" folder and also take the new modules for the kernel you want to flash, delete all the files in the "modules" folder, and put the new modules into the "modules" folder.
Click to expand...
Click to collapse
I'll test it out and report back.
---------- Post added at 04:36 PM ---------- Previous post was at 04:14 PM ----------
Usage instructions:
Open the zip file and extract the boot-img-flasher.exe and the files directory somewhere on your computer.
Boot your phone into bootloader/fastboot.
In the 'files' directory (example: C:\Flasher\Files) put the boot.img from your selected kernel.
In the modules directory (C:\Flasher\Files) put whatever modules come with your kernel.
Run boot-img-flasher.exe
Select option 1 (if flashing the stock kernel it comes with). Phone will reboot into bootloader and flash the kernel. Follow the directions.
Viper needs to make a few changes so it's not quite ready for prime time yet, but it should work. I'd wait for the next version, but if you're impatient, light it up and give it a shot
smw6180 said:
I'll test it out and report back.
---------- Post added at 04:36 PM ---------- Previous post was at 04:14 PM ----------
Usage instructions:
Open the zip file and extract the boot-img-flasher.exe and the files directory somewhere on your computer.
Boot your phone into bootloader/fastboot.
In the 'files' directory (example: C:\Flasher\Files) put the boot.img from your selected kernel.
In the modules directory (C:\Flasher\Files) put whatever modules come with your kernel.
Run boot-img-flasher.exe
Select option 1 (if flashing the stock kernel it comes with). Phone will reboot into bootloader and flash the kernel. Follow the directions.
Viper needs to make a few changes so it's not quite ready for prime time yet, but it should work. I'd wait for the next version, but if you're impatient, light it up and give it a shot
Click to expand...
Click to collapse
Thanks Steve, as always.
If you need to use this right away, boot into bootloader the go into the advanced menu and flash from there. You may see an Adb error when its rebooting, I will fix all this in about an hour or so.
Sent from my EVO using Tapatalk 2
-viperboy- said:
Thanks Steve, as always.
If you need to use this right away, boot into bootloader the go into the advanced menu and flash from there. You may see an Adb error when its rebooting, I will fix all this in about an hour or so.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
No sweat. It's what I do.
Always at it viper :thumbup:
When I saw thread title, I thought it was gonna be something that could be done from the phone, but I guess that's what flashIMGGUI is for, or am I wrong?
from my flying AOKP'd Evo LTE and xda premium
scottspa74 said:
Always at it viper :thumbup:
When I saw thread title, I thought it was gonna be something that could be done from the phone, but I guess that's what flashIMGGUI is for, or am I wrong?
from my flying AOKP'd Evo LTE and xda premium
Click to expand...
Click to collapse
Yeah, this will be from the computer Would be hard to have an app run on your phone that is bootlooping, now wouldn't it? :silly: Almost done with v1.1. Actually, it is done - someone is just whipping me up a kick ass icon
This is pretty cool. Thanks for the tool.
via eVo.
Blackcircle said:
This is pretty cool. Thanks for the tool.
via eVo.
Click to expand...
Click to collapse
Wait for the next one.
New version is up, works flawless. I DARE you to try an break it :silly: Still need to update the first few posts when I get back from the gym.
Enjoy!
-viperboy- said:
New version is up, works flawless. I DARE you to try an break it :silly: Still need to update the first few posts when I get back from the gym.
Enjoy!
Click to expand...
Click to collapse
Don't ever dare me to break something.
Could I please have some feedback on this program?
Sent from my EVO using Tapatalk 2
-viperboy- said:
Could I please have some feedback on this program?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
It works. Happy?
smw6180 said:
It works. Happy?
Click to expand...
Click to collapse
Fuuuuuuuuuu
Sent from my EVO using Tapatalk 2
-viperboy- said:
Fuuuuuuuuuu
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
lol
Nice good lookin out
This program saved my life yesterday. Thank you viper, thank you for your hard work.
Is it ok if we post this in other threads to help each other out of trouble?
bigdaddy619 said:
Is it ok if we post this in other threads to help each other out of trouble?
Click to expand...
Click to collapse
Of course
Sent from my EVO using Tapatalk 2

[TOOL](ROOT)(RECOVERY) i545 all-in-one root + recovery installer Updated 7-8-13

BHP090808 PRESENTS
I545 ALL-IN-ONE TOOL ROOT + RECOVERY INSTALLER
**READ READ READ AND READ AGAIN**
DO NOT RUN IF YOU ARE ON NEW ME7 OTA UPDATE!
This tool was created to simplify the rooting and recovery installation on this device. The rooting method used is the same method already posted in this development section. I just put all the resources into a tool and provided easy to follow instructions. The root process is not a one click. You must read instructions in tool window for each step of the rooting process. It is very straightforward and easy to follow, but you must follow the instructions exactly. Once rooting is complete all other steps are one click features including recovery installation.
Make sure you have latest samsung drivers installed. I recommend downloading Samsung Kies, It will automatically download latest drivers for you. Make sure unknown sources is checked and USB Debugging is enabled or the tool will not see your phone. Also make sure you do not have any pw or pattern lock screen enabled. As soon as you start step 1 check your phone screen. You will see a prompt to authorize your computer. Select ALWAYS ALLOW. This is the cause of the majority of errors. Also the usb cable that came with your s4 is recommended. If you are having issues with odin recognizing your phone check drivers and try using a different usb port. If using a desktop I recommend using the rear usb ports. Prep step (#2) removes install-recovery.sh and KNOXAgent.apk from your phone. These have been known to cause unwanted errors.
If when rebooting from recovery you are prompted with a message advising root may have been lost would you like recovery to fix it? I have always chosen NO and had no issues.
I do not offer support on either recovery or any rom you flash after this process. Check their respective threads for any and all information. Links to both recovery threads are included as options in tool.
I've included latest CWM (credit OUDHS & Shabbypenguin) and TWRP (credit Team Win). The rooting method and kernels used were provided by sextape. The step by step root process from open1your1eyes0. The motochopper exploit was created by the legendary djrbliss. Also a big thanks to djrbliss for Loki, without which none of this would be possible. Make sure to find these fine folks and give thanks, money, beer, your first born..... whatever you see fit.
I'd also like to thank niv3d, an21281, CraziiChief and all of my other testers. I'd also like to thank my wife and kids for leaving me alone while I worked on this. Mirrors are ok, just pm me the link to list in the OP.
Hope this makes someones life easier.... Have a nice day!!!!
Instructions:
Download zip file
Unzip on desktop
Connect phone with USB debugging enabled
Click RUN_ME (inside unzipped folder)
Pick option and go!!
Have patience it takes a few for cpu to see phone after reboots and in Odin
dont disconnect phone until process is complete
If stock start with option 1
If already rooted start with option 2 then choose recovery
Download-
I545 All-In-One Tool
https://mega.co.nz/#!I1c1jTBY!GCtdvXRoeXiCRNgjXge3CA9UZ3FIBtHf-m2_kQCr3BI
Mirror-
http://db.tt/1wpdewwY
Dont forget to hit the thanks button and rate thread 5 stars:thumbup:
And if youd like to buy me a beer I wont complain :beer:
Thanks for the beer list::beer:
(Donations Received)
yamaharider
Michael Oconnell
SolemnSinner
Mills23
Eric Lee
Artiepea
JNava420
Footbaggin
Charles Uniman
Updated 5/30
oudhs cwm is now 1.0.3.5
Updated 5/31
Fixed script typos
(Thanks scrosler)
Updated 6/1
Added to prep script
Added additional instruction script
Updated 6/3
Fixed script typos
(Thanks opethfan89)
Updated 7/8
TWRP updated to 2.6.0.0
Great job! This tool simplifies the root process and makes it a breeze for those who are tempted to root and flash! Give it a shot you won't be disappointed!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tested this utility a few hours ago and it works great! Just make sure to follow the directions and give it time to do every step, very easy!
Complete newb question here, and searching didn't turn up much.. Seeing as there is no Bootloader unlock yet, theoretically you should be able to just revert to stock and unroot and no one would know you were ever rooted/ROMd, right?
If I completely missed a post that explained this, sorry.. I searched and didn't see it.
Yep. Just Odin back to stock and you're done.
Sent from my SCH-I605 using Tapatalk 4 Beta
Just used this method to root and install recovery on my new S4 and it worked great! thanks for the tool
You sir, are awesome. So easy. Always nerve racking rooting a new phone but this is cake. Took 5 minutes. A caveman could do it! Thank you!
great tool! worked very well! thanks!
Worked like a dream, thanks a lot!
Tool Updated...
CWM is now 1.0.3.5
Thanks. Success! Ive never seen odin in action, that was cool. Thanks for the easy instructions throughout the process. Very easy.
Sent from my SCH-I545 using Tapatalk 2
Thanks,m just had to trade my phone in due to manf. defect. This'll make re-rooting a lot easier!
Download link broken. Says file is corrupt.
Sent from my Galaxy Nexus using xda premium
USB Debug
New to Galaxy S4 where can I find USB Debug in setting? thx!
kevinniven said:
New to Galaxy S4 where can I find USB Debug in setting? thx!
Click to expand...
Click to collapse
To unlock the Dev Options menu, go to Settings -> About Device and scroll down to the "Build Number." Now, tap on your "Build Number" five times, and you should see a toast notification pop up saying "Developer mode has been enabled." Back out of the About Device menu and you'll see Dev Options back where it belongs, so you can turn on USB Debugging and whatever else you want to.
(taken from http://gs4.wonderhowto.com/how-to/enable-hidden-developer-options-your-samsung-galaxy-s4-0146687/)
Elvis_Marmaduke said:
Thanks,m just had to trade my phone in due to manf. defect. This'll make re-rooting a lot easier!
Click to expand...
Click to collapse
Just curious....what was the defect?
Tar file
All seems to be going ok but not seeing TAR file in Oden?
viceversa said:
Just curious....what was the defect?
Click to expand...
Click to collapse
It was a small thing in the top left corner of the screen, I could only see with the screen off. It looked like glue or a tiny hair under the glass. I was mostly just worried it was going to get worse over time. I didn't even notice it until I was putting a screen protector on (you know how impossible it is to get rid of all that dust). Free replacement through Verizon though because it's a defect.

[RECOVERY][golden] TWRP 3.x

TWRP 3.x
for
Samsung Galaxy S III mini
aka. Samsung Golden​
About F2FS: F2FS is supported on latest TWRP by default.​
Download
http://andi34.github.io/recoveries_golden.html
Sources
Device & Kernel Source: https://github.com/andi34
Recovery Source: https://github.com/omnirom/android_bootable_recovery
XDA:DevDB Information
[golden] TWRP, Tool/Utility for the Samsung Galaxy S III Mini
Contributors
Android-Andi, golden-guy
Version Information
Status: Stable
Current Stable Version: 2.8.6.2
Stable Release Date: 2015-06-06
Created 2014-05-11
Last Updated 2016-08-14
Reserved
DOWNLOADS
http://andi34.github.io/recoveries_golden.html
~ older Files attached ~
How to flash using Odin?
If you have kies installed - uninstall first!
Download and extract "GT-I8190_TWRP_2.7.0.0.tar.md5.zip" once - you will now get the Odin-Flashable "GT-I8190_TWRP_2.7.0.0.tar.md5".
(If you got a "recovery.img" then you extracted twice! Odin can not flash *.img - but feel free to use Heimdall!)
Download attached Odin3.zip and extract it.
Run Odin.exe as administrator.
Add the twrp.tar.md5 as "PDA".
Re-partition and auto reboot NOT checked (i disabled all unneeded Options to be on the safe side )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now boot your device into downloadmode. Press volume down, Homebutton and Power-Button at the Same time
Your Device now boots into Download-Mode
Press Volume Up to confirm
Connect your Device to your PC and wait for Odin to detect it - maybe it takes some minutes until all drivers installed.
(SCREENSHOT LATER)
Everything right? You´ll be good to go if you followed all steps before!
Now press start in Odin.
Wait for Odin to finish flashing - wait one minute more after that to be sure.
(SCREENSHOT LATER)
Now disconnect and directly boot into recovery using the hardware key combination - Press volume up, Homebutton and Power-Button at the Same time. Release the Power-Button after the S3 Mini Logo - keep pressing volume up and the homebutton!
Happy TWRP
Time to get free from the Nova oppression :highfive:
Nice to see more and more people working on our phone!!
Thanks for your work
Sent from my GT-I8190 using XDA Premium 4 mobile app
joelalmeidaptg said:
Time to get free from the Nova oppression :highfive:
Click to expand...
Click to collapse
:good:
Hi Andi,
First of all, thanks for your work. Any difference between Nova's & yours twrp!?
mauam said:
Hi Andi,
First of all, thanks for your work. Any difference between Nova's & yours twrp!?
Click to expand...
Click to collapse
hi mauam mf,
no differences as i see (flashed it and it works as it should)
m.
@mauam mine is based on latest TWRP Source, there have been some changes in the meantime - also compiled myself
Very good, but you could compile a AOSP or MIUI for us? supporting all variants of the S3 Mini 8190/L/N
Good Work Thank you Android-Andy!!!
JynAlek said:
Very good, but you could compile a AOSP or MIUI for us? supporting all variants of the S3 Mini 8190/L/N
Click to expand...
Click to collapse
We are all waiting for you (no ETAS)
Well excellent work, I will keep with your twrp instead. Yours has a option to adjust the brightness, nf twrp not:laugh: Keep up bud:good:
I rooted with CF-auto root and now im in "Android system recovery <3e>" and not ODIN as before.
I tested "apply update from exteral storage" with twrp2.7_golden-20140508.zip, not working. I got "E:signature verification failed"
How do I get TWRP in?
@belgar
Download "I8190_TWRP_2.7.0.0.tar.md5.zip" and extract it once - you´ll now have a "I8190_TWRP_2.7.0.0.tar.md5".
Run Odin as Administrator.
Place the "I8190_TWRP_2.7.0.0.tar.md5" in as PDA.
Make sure Re-Partition and Auto-Reboot NOT CHECKED!
Boot your Phone into Download-Mode.
Connect it with your PC, wait until Odin added the device.
Now in Odin press "Start". Wait untill Odin finished flasheing - better wait one minute more.
If flashing didn´t failed (watch the text in Odin) reboot DIREKTLY into recovery using your Hardware-Keys.
That´s it
Edit:
BTW: Do we have CF-Autoroot for golden? Don´t use from other devices!
Sry! It wasnt CF-autoboot, i flashed another device the same day.
It was http://forum.xda-developers.com/showthread.php?t=2108900.
Pressed the wrong combination when I started the device. Pressed vol UP instead of vol DOWN.
---------- Post added at 10:23 PM ---------- Previous post was at 10:19 PM ----------
I cant uncheck "Auto Reboot", its all greyed out.
belgar said:
Sry! It wasnt CF-autoboot, i flashed another device the same day.
It was http://forum.xda-developers.com/showthread.php?t=2108900.
Pressed the wrong combination when I started the device. Pressed vol UP instead of vol DOWN.
---------- Post added at 10:23 PM ---------- Previous post was at 10:19 PM ----------
I cant uncheck "Auto Reboot", its all greyed out.
Click to expand...
Click to collapse
Check the Odin3.ini, you can use e.g. Notepad++ to edit it.
Here´s an example:
Code:
[Option]
Title= Odin 3
FactoryResetTime=120
OptionEnable=0
SLP=0
AuthorityKey=pw
[APOption]
RePartition=0
[COLOR="Red"]AutoReboot=1[/COLOR]
FResetTime=0
FlashLock=0
TFlash=0
NandErase=0
[CPOption]
PhoneEFSClear=0
PhoneBootUpdate=0k
[UIOption]
LED=0
[ButtonOption]
Bootloader=0
PDA=1
Phone=0
CSC=0
UMS/PATCH=0
[D300Jig]
;[0] not use / COM [1~2] usable
D300COM=0
;[0] not use / [1] use
MicroCable=0
[PortArrange]
;SAMSUNG Mobile Modem port (for Download mode)
DPort0=
DPort1=
DPort2=
DPort3=
DPort4=
DPort5=
DPort6=
DPort7=
;SAMSUNG Android USB Modem port (for Samsung Kies)
SPort0=
SPort1=
SPort2=
SPort3=
SPort4=
SPort5=
SPort6=
SPort7=
Make sure AutoReboot=0
I Re-Uploaded TWRP, USB-Connection now working in recovery - you are now able to use adb in recovery
Android-Andi said:
I Re-Uploaded TWRP, USB-Connection now working in recovery - you are now able to use adb in recovery
Click to expand...
Click to collapse
Awesome news cant wait to test you are doing great work :thumbup:
Sent from my GT-I8190 using XDA Premium 4 mobile app
Another great work from you Android-Andi and yes i'm excited with all this "cherry picks" you made for our phone.
Thanks... :good:

Root Doogee X5 Pro

Hi,
A thread has been created and was deleted.. so, as I tried it out, here are the steps..
Disclaimer : I m not responsible and report what has been working for my case which was as well leading to no data lost, no wipe so far.
Note : Having an alternate recovery (TWRP instead of 3e) would avoid a successfull any future phone update done through the menu. Updates will then have to be pushed with SP_Flash_Tool
Thanks : doogeemobile.com / original xda thread by gramolitero
What could be needed : -> Same tools and steps as the Doogee X5, except the Scatted for MT6735 and recovery.img files.
SP_Flash_Tools and Doogee X5 procedure
TWRP Recovery file, in English
+ Attached Scatter for Mediatek MT6735
- Optional- Doogee X5Pro Rom
Steps :
- Download/Unpack FlashTools, run Flash_tool.exe as an Administrator
- Select "Download Agent" and input MKT_AllInOne_DA.bin
- Select "scatter-Loading" and search MT6735_Android_scatter.txt
- Select "Download Only"
- Uncheck all boxes
- Checkmark and change the path of recovery file to be replaced.
- Make sure the connection is made through USB in the options (See screenshot)
- Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
- Press “Download” button to start and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles in a new window is then displayed.. -> OK
- Finish !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once this recovery has been done.
- Boot the phone with Power and Vol+ simultaneously.
- Select "Recovery" with VolUp key, validate with VolDown key.
- Plug the phone to the PC, and drop the BETA-SuperSu.v220 on the SD Card
- Install SuperSU then reboot.
The phone is now rooted.. place to Xposed, or any apps through the TWRP recovery.
Regards
Pierrick
hi,
can you please post all files here because i can't download it from that link you posted here ( 01-Android_CDC_Driver.zip, 02-SP Flash Tool+Scatter File.rar, 03-TWRP Recovery for DoogeeX5.rar )
thx
found all files, but when i try instaling su i got error in recovery, my phone have R08 rom and idk if that is problem?
i rooted my phone, only i was using older version super su 2.46 i think, and i changed name to update, after that phone was rooted
finally someone recreate the thread:victory:
can it be an official dev thread of x5/x5pro? following the russian thread is really hard even with gTrans
days ago they released r09 firmware...hv anyone try it?
im still on r08 modded
lucaviend said:
finally someone recreate the thread:victory:
can it be an official dev thread of x5/x5pro? following the russian thread is really hard even with gTrans
days ago they released r09 firmware...hv anyone try it?
im still on r08 modded
Click to expand...
Click to collapse
i have 09 but didn't root again, i don't see any difference from 08
i just tried r09 today...yes i can felt the different from r08
i hope someone can make a cusom rom for this phone
Thanks a lot
i'm on R09 and I'm rooted already - it was easy as a breeze - it's time for LSpeed Optimizer.
TiA
nanotech17 said:
i'm on R09 and I'm rooted already - it was easy as a breeze - it's time for LSpeed Optimizer.
TiA
Click to expand...
Click to collapse
yup the root process is still same as before...
i'v flash L speed and bravia 4
Sooo, im from Canada and it won't work over here cause the Band Frequencies are not selected. I can see the right one I need to select, but they are blacked out. Will rooting the phone unlock those bands so I can choose the right frequency for Canada?
Love the phone, just whish I could use it here
rooting will not change phone's band freq
why is no custom rom for this phone. . .so sad -_-
Hold your horses boys. It's a new phone so it will take some time until there is a custom ROM.
Hopefully someone will port the CyanogenMod to this nice mobile.
Something else, has anyone tried the OTG functions? Can it read a thumb drive properly? I hope it has V4L2 drivers when I receive mine.
Does the twrp recovery actually work. I've flashed it to my phone and it doesn't work. Has anybody got any other links. Also the website where the recovery file is linked is blocked by windows
Worked perfectly, thank you!
If this helps anyone, I had issues getting the drivers installed, I followed this thread here; http://forum.xda-developers.com/showthread.php?t=2180436
It kept appearing and disappearing in Device manager, just click it as soon as it appear and then install the drivers. If it disappears it does not matter at that point
get a good good news veryone...
http://www.gizmochina.com/2015/12/23/oukitel-k6000-cm12-1-rom/
CM12.1 mt6735 link
https://mega.nz/#!GN0lWI7A!M0ZSROTp7c1gAP7B930vRj7m3blh0tF79gpuMff4-pk
edit: my wrong...it's cm12.1
my first read i thought it was cm13 marshmallow LOL
but...it's cool if CM rom can be ported for us
Hi
I need some help, the Doogee SW "SP_Flash_Tools and Doogee X5 procedure" is not available anylonger on thir server.
Anybody an idea how to get it?
Or can somebody upload, please.
Thanks and Merry X-MAS
linolino
~~~
Update I used the Names on the Doogee website to google for files.
-Found suiting USB Drivers
-found flash tool
With the OPs description and cross checking Doogees (non Pro) description
I was able to root - Thanks.
lucaviend said:
get a good good news veryone...
http://www.gizmochina.com/2015/12/23/oukitel-k6000-cm12-1-rom/
CM12.1 mt6735 link
https://mega.nz/#!GN0lWI7A!M0ZSROTp7c1gAP7B930vRj7m3blh0tF79gpuMff4-pk
edit: my wrong...it's cm12.1
my first read i thought it was cm13 marshmallow LOL
but...it's cool if CM rom can be ported for us
Click to expand...
Click to collapse
want to flash a rom of doogee x5 pro from twrp.
does anyone got the zip file to upload[COLOR="Silve[COLOR="Silver"]
---------- Post added at 01:13 AM ---------- Previous post was at 01:05 AM ----------
[/COLOR]i need the zip file to flash doogee x5 pro from twrp recovery
can anyone upload the file please
linolino said:
Hi
I need some help, the Doogee SW "SP_Flash_Tools and Doogee X5 procedure" is not available anylonger on thir server.
Anybody an idea how to get it?
Or can somebody upload, please.
Thanks and Merry X-MAS
linolino
~~~
Update I used the Names on the Doogee website to google for files.
-Found suiting USB Drivers
-found flash tool
With the OPs description and cross checking Doogees (non Pro) description
I was able to root - Thanks.
Click to expand...
Click to collapse
u can check here...doogee x5pro russian forum
http://4pda.ru/forum/index.php?showtopic=699029
use gTrans
reisrm said:
want to flash a rom of doogee x5 pro from twrp.
does anyone got the zip file to upload[COLOR="Silve[COLOR="Silver"]
---------- Post added at 01:13 AM ---------- Previous post was at 01:05 AM ----------
[/COLOR]i need the zip file to flash doogee x5 pro from twrp recovery
can anyone upload the file please
Click to expand...
Click to collapse
what zip? cm12.1?
it's there via mega but i dont if it work for x5pro because it's originally for oukitel k6000 (same processor)
Most of the files are missing/Links broken at doogeemobile.com/blog/doogee-x5-phone-root-guide.

Categories

Resources