Hello, My Name is Mahdi. I am from Bangladesh. I am new in XDA. I am in a serious problem. My phones Android OS has been deleted accidentally. Now what can I do. When I have bought my set after 2 months I have Rooted it with v root. Then installed custom recovery name phillz touch recovery. Then flashed a custom rom of my phone name is lg g3 custom rom. Next day I have used build prop editor to tweak phone. But accidentally inputted wrong value. Then after reboot it bootlooped. Now i can only go in recovery by going in bootloader by pressing power+volume up while phone is off. But after pressing the buttons a menu comes with three options but i dont know is it bootloader. Options are 1.boot recovery. 2.boot fastboot 3. Reboot normally. After going in recovery I have fully wiped phone. In my recovery there is a option name ean to install. A new rom. I pressed that then phone cleans. Then i have cliked wipe data/factory reset and wipe cahe and wipe dalvik cahe. But my phone has no memory card slot. If had then i can put rom in memory card. Now i can connect phoe with adb and fastboot. But i cant flashing\installing rom with any way such not with adb, not with fastboot, and not with sp flash tool. Now what can I do please help me . Now what can I do? Give any solutions anyone.
Related
Can someone help me on getting 2.3 gingerbread with the cyanogen mod on my phone (LG Phoenix). I already have clockwork recovery and everything, i just need the files from someone, ones that work, most of them on the internet are invalid..
go to this thread.
http://forum.xda-developers.com/showthread.php?t=1436952
scroll down till you see this rom.
A-SERIES .32 KERNEL, OLD BASEBAND Baseband v10E
download it and put it on root of sd card. ie not in any folders
you will need this kernel as you have a phoenix. p500 kernels wont work correctly.
http://forums.androidcentral.com/t-...-2-08-overclock-cm7-2-3-7-etc-gyro-fixed.html
scroll down and download the attachment. joban 2.08 kernel zip
put it on root of sd card
im not sure how you applied roms, but because rom manager isnt supported on our phones i wouldnt recommend useing it to flash roms.
boot into recovery. i power off phone then hold power, home, and vol-down at the same time, keep held down till it loads into recovery.
do factory reset/wipe
wipe cache(s)
wipe battery stats. this and wipe delvik cache is thru advance option. also you can turn off/on signature verification if your having issues. ie invalid or signature not found.
then choose apply zip from sd card
choose zip from sd card
find rom , choose it
it will ask you again to make sure you got the one you want.
after flash reboot phone.
once booted you will have funky colors, dont worry. turn off phone a boot into recovery.
flash kernel same way as rom. no need to wipe anything though.
reboot and enjoy.
a caution when using rom manager aside from flashing the recovery. other functions have resulted in soft bricks and weird resets.
LG Phoenix running CM7.2+joban 2.08 kernel
hit the thanks button if i helped.
i have to sign up for android central, nd the sign up doesnt work bcuz of the captcha, and if rom manager isnt supported is there another thing i can use
Rom manager is erelavent. Can you boot into recovery? If so then ill get you a link to the kernel.
ya i can boot into recovery, i have backups too
Hey,
First off i hope i have put this on the right sub forum.
I've been stupid (I Think) I've olso looked around on the forum and the [READ THIS] Got a Boot Loop? Don't post a New Thread!
topic.
I'm using my SGS2 for a year now and was using the ressurexionRimix rom for a while.
I've been plaing around with my phone so i got lots of folder that were not used etc, so I wanted to get it back to factory settings, here is when all went down.
Via Settings-Backup and recovery i gave my phone a factory reset (while using the latest ressurexionremix rom, i think this is the misstake i made) When my phone went into the reboot is got stuck on the splash screen, it kept reapeeting the boot animation.
The second mistake i mad was not puting back my back-up but thought well i want it back to it's first state so i'll use ODIN to flash the stock ROM onto it. now, 4 hours later and about 10 trys with diferent versions of the stock roms i'm still stuck on the boot screen.
I've also tryd flashing a cwm so i could get in cwm recovery, this also without any luck
Does anyone have a idea what to do!?
go back to recovery - mounts andstorage and format the following :
cache, system, data, sdcards if you have it in recovery. reboot
you have a bkank screen as your phone has been wiped. reboot into download mode.
Connect odin and flash a stock rom. reboot and your phone should work provided that you have not damaged the flash chip on the motherboard.
Is this in CWM? the problem is i dont have that anymore because i've flashed it toc stok. I now get in the Android system recovery
The option i get there ar:
Reboot system now
apply update from external storage
Wype data/factory reset
Wipe cache parition
apply update from cash
test redbend fola[FS]
Will try this, thank..will let you know if it worked
Wiped data/factory reset and cache after this i ebooted my phone and i got the message installing application, now i'm in the setup menu. Looks like it is working.
Did'nt realice there was a recovery besides CWM Thank yoy so much Cosmic Blue!!! You saved my life!!
Hi I have attempted to install experience rom on my xperia U. Firstly i successfully unlocked the boot loader. I then rooted it and installed CWM recovery all still good. I the transferred the ROM image to the phone went into recovery did a wipe data factory reset and wipe cash partition. Also wipe dalvick cache. Selected the ROM and install started, it hung, only way out was battery pull, I went back into recovery same thing happened, finally tried once more and it hung at about 75%. Now phone goes in a loop sony logo to black screen and I cant get into recovery mode. I have searched to see if I can find a way out but not found a way around it yet. I would be very grateful for any help with this.
xs1m0nx said:
Hi I have attempted to install experience rom on my xperia U. Firstly i successfully unlocked the boot loader. I then rooted it and installed CWM recovery all still good. I the transferred the ROM image to the phone went into recovery did a wipe data factory reset and wipe cash partition. Also wipe dalvick cache. Selected the ROM and install started, it hung, only way out was battery pull, I went back into recovery same thing happened, finally tried once more and it hung at about 75%. Now phone goes in a loop sony logo to black screen and I cant get into recovery mode. I have searched to see if I can find a way out but not found a way around it yet. I would be very grateful for any help with this.
Click to expand...
Click to collapse
flash stock ICS Rom ftf with flashtool
Thanks for help
Thanks I managed to flash stock Gingerbread in the end.
In case anyone else has a similar problem here is a handy guide I found. (youtube.com/watch?v=hPPWRXcsz7g)
Where it says connect phone I found you need to connect it in fast boot (hold volume up button as you connect it) when the software is ready to flash un-plug phone then connect in flash mode (hold volume down button as you connect).
xs1m0nx said:
Hi I have attempted to install experience rom on my xperia U. Firstly i successfully unlocked the boot loader. I then rooted it and installed CWM recovery all still good. I the transferred the ROM image to the phone went into recovery did a wipe data factory reset and wipe cash partition. Also wipe dalvick cache. Selected the ROM and install started, it hung, only way out was battery pull, I went back into recovery same thing happened, finally tried once more and it hung at about 75%. Now phone goes in a loop sony logo to black screen and I cant get into recovery mode. I have searched to see if I can find a way out but not found a way around it yet. I would be very grateful for any help with this.
Click to expand...
Click to collapse
Flash stock firmware.
Install fastboot drivers.
Flash SlidingXU in cmd
Try out Zperience or TheBrainsRom following factory data reset, wiping cache and dalvik cache.
I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
D03035790 said:
I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
Click to expand...
Click to collapse
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
rcstar6696 said:
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
Click to expand...
Click to collapse
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
D03035790 said:
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
Click to expand...
Click to collapse
Use this one https://mega.nz/#!rI4y2bJS!VksDLNy_a8cy8x-VBviYRkTP2SdSBm7Rs9G445vUXCU
This is twrp but it works with cmbased roms.
I was running cm12.1_janice-130915 on my Samsung Galaxy S Advance I9070 for a couple of days, than I got a bug which could perhaps be fixed by wiping the dalvik chache and another chache, so I long-clicked the power button, opened the reboot menu and chose 'Reboot into Recovery' after which it rebooted into recovery. However when I tell it from the recovery to reboot to system, it won't, it will reboot to recovery again.
So I started of by wiping partitions and chaches in the hope that the setting would be 'undone' in the end I did a factory reset and put the rom on my phone again, though it's still booting into recovery modus.
I don't know what I could do anymore. ADB-sideload won't run (if that would be any help). Is my phone a brick now or is there hope?
Sounds like you will need to restore the stock firmware / OS with Odin.