Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
THIS RECOVERY WILL TRIP YOUR KNOX COUNTER ..AND UR WARRANTY WILL BE VOID
THIS RECOVERY IS ONLY FOR THE GALAXY A7 [SM-A700FD] [QCOM] RUNNING LOLLIPOP
THIS RECOVERY HAS BEEN TESTED AND EVERYTHING SEEMS TO BE WORKING FINE .. CHECK THE BUGS SECTIONS
Why twrp ? Why not a pre-rooted firmware which will not void warranty?
Ans : TWRP has many more functionality than stock recovery ! Rooting means to playing around with your device.If some thing goes wrong it you have to flash the whole firmware again instead,backup your ROM through CWM and if something goes wrong restore your backup AS SIMPLE AS THAT !
All you have to do is follow my instructions :
STEP 1 :
-Download and setup ADB drivers for your device
can be found here Drivers !
STEP 2 :
-Download the recovery from --->
TWRP
-Download odin 3 Link
-Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Galaxy A7logo
-Press vol up to confirm
STEP 3 :
-Now that you are in odin mode connect your device via usb cable !
-Now open Odin3 3.09 that you have downloaded.
-If there is a pop-up like Installing ADB drivers let it get finished it is usually updates !!!!
-Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it
MAKE SURE U UNTICK THE AUTO-REBOOT BUTTON
-Click Start
ONCE IT SAYS PASS ... BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON
HOW TO ROOT THE DEVICE :
-Download SuperSu (obviously the latest one) from here ------> Click here !
-Copy that to internal sd card or external sd
-Power off your device and press vol up + power + home button (all at once)
-Select install zip from sdcard --->choose zip from sdcard ---> scroll down and flash UPDATE-SuperSU-v2.xx.zip
Done ! And you are ready to go
BUGS
You tell me!
YOU TELL ME
NOTE : IF ANY OPTION DOESNT WORK FOR U ... TURN OFF UR PHONE AND THEN BOOT INTO RECOVERY
SOURCES
DEVICE TREE
KERNEL(PREBUILT ... THANX TO SAMSUNG ... AVAILABLE IN THE DEVICE TREE)
CREDITS
TWRP TEAM
@govind.madhu93 for testing
CHANGELOG :-
BUILD 2
Fixed Recovery reboot loop
BUILD 1
Initial Build
Thanks a lot!!
Can i try this method for A700FQ if i can flash twrp i can root my A7
I had installed a kitkat twrp on my a700fd that was developed for a700h and it worked.
Sent from my SM-A700FD using XDA Free mobile app
help
system force close after flashing recovery. only status bar is visible
PS: everything working fine now. cleared cache and restarted it. thanks a lot. backup restore also working
Hey are you also thinking to develop any custom rom for galaxy a7 ?
if you start i am ready to help.
govind.madhu93 said:
I had installed a kitkat twrp on my a700fd that was developed for a700h and it worked.
Sent from my SM-A700FD using XDA Free mobile app
Click to expand...
Click to collapse
It work with A700H kitkat my friend?
is this working on russian lollipop version of A700FD?
palimatix said:
is this working on russian lollipop version of A700FD?
Click to expand...
Click to collapse
yes
Hello
How about the SM-A700F would it work on that device too?
Great job. Now we just need an AOSP ROM.
I noticed that backups made with this TWRP have wrong date in their names (half a year earlier).
New build is up !!
Changelog
Fix Recovery reboot loop
Download - http://dl.rutvikrajagopal.com/a7lte/twrp
Will we see any development for the A700F [Exynos] ?
Hello! I've installed the second version of TWRP - all works, but backup folder name has invalid date - today it made backup with folder name 2015-03-25..
jazzzzy said:
Hello! I've installed the second version of TWRP - all works, but backup folder name has invalid date - today it made backup with folder name 2015-03-25..
Click to expand...
Click to collapse
I'll look into the issue soon
RVR said:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
THIS RECOVERY WILL TRIP YOUR KNOX COUNTER ..AND UR WARRANTY WILL BE VOID
THIS RECOVERY IS ONLY FOR THE GALAXY A7 [SM-A700FD] [QCOM] RUNNING LOLLIPOP
THIS RECOVERY HAS BEEN TESTED AND EVERYTHING SEEMS TO BE WORKING FINE .. CHECK THE BUGS SECTIONS
Why twrp ? Why not a pre-rooted firmware which will not void warranty?
Ans : TWRP has many more functionality than stock recovery ! Rooting means to playing around with your device.If some thing goes wrong it you have to flash the whole firmware again instead,backup your ROM through CWM and if something goes wrong restore your backup AS SIMPLE AS THAT !
All you have to do is follow my instructions :
STEP 1 :
-Download and setup ADB drivers for your device
can be found here Drivers !
STEP 2 :
-Download the recovery from --->
TWRP
-Download odin 3 Link
-Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Galaxy A7logo
-Press vol up to confirm
STEP 3 :
-Now that you are in odin mode connect your device via usb cable !
-Now open Odin3 3.09 that you have downloaded.
-If there is a pop-up like Installing ADB drivers let it get finished it is usually updates !!!!
-Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it
MAKE SURE U UNTICK THE AUTO-REBOOT BUTTON
-Click Start
ONCE IT SAYS PASS ... BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON
HOW TO ROOT THE DEVICE :
-Download SuperSu (obviously the latest one) from here ------> Click here !
-Copy that to internal sd card or external sd
-Power off your device and press vol up + power + home button (all at once)
-Select install zip from sdcard --->choose zip from sdcard ---> scroll down and flash UPDATE-SuperSU-v2.xx.zip
Done ! And you are ready to go
BUGS
You tell me!
YOU TELL ME
NOTE : IF ANY OPTION DOESNT WORK FOR U ... TURN OFF UR PHONE AND THEN BOOT INTO RECOVERY
SOURCES
DEVICE TREE
KERNEL(PREBUILT ... THANX TO SAMSUNG ... AVAILABLE IN THE DEVICE TREE)
CREDITS
TWRP TEAM
@govind.madhu93 for testing
Click to expand...
Click to collapse
hello, you can create a recovery for Galaxy A7 (SM-A700F Lollipop)? I looked everywhere but there:laugh::laugh:
nino64 said:
hello, you can create a recovery for Galaxy A7 (SM-A700F Lollipop)? I looked everywhere but there:laugh::laugh:
Click to expand...
Click to collapse
I would like that too if possible, our Sm-A700f dosnt get much love :crying:
After installed the build 2 I am still having reboot loop.
Related
This is a simple tutorial on how to root your phone and install CWM recovery and then flash a custom ROM to you X10 mini Pro:
I'M NOT RESPONSIBLE BY ANY WAY IF YOU MISS-USED THIS TUTORIAL AND YOU BRICKED YOUR DEVICE! PLEASE BE CAREFUL USING IT AND BE SURE TO FOLLOW THE STEPS CORRECTLY.
1. Download CWMInstaller-Windows-v4-dl.zip (Credits go to nobodyAtall & D4rKn3sSyS for the actual CWM files. Other credits in the README.txt file) and extract it. Original Post for this tool is at:
http://forum.xda-developers.com/showthread.php?t=1257701
please say thanks to rect2409 too for the above post.
2. Inside the settings menu in your phone go to Application then go to development then select “USB Debugging Mode”
3. Connect your phone to the PC via USB and select “Charge the Phone”. DO NOT MOUNT THE SD CARD.
4. Inside CWMInstaller-Windows-v4-dl already extracted, double click on Install.Bat
5. Follow the questions as per below for non rooted phones:
a. Is your device ROOTed? (Y/N): press Y then enter. SuperOneClick will launch now, you will only need to press “Root” wait till the process ends then this application will ask you to test the root press yes for it.
b. Once finished and returned back to the cmd window, just press enter to continue and install the CWM recovery.
c. Once done the phone will reboot and you will be successfully rooted and installed CWM recovery on your phone.6. Now time to install a custom ROM:
a. Choose a custom ROM from the forum here in the Development section of your device.
b. Download the ROM and put it in your Memory Card.
c. Turn off or reboot your phone.
d. Once Sony Ericsson Logo on a black screen shows up press the back button several time till the CWM recovery console is displayed.
e. You can navigate between option of this console by using the volume keys up and down and to select an option press the home key and to go back to a previous page press the back key.
f. From this console you should backup your existing ROM by choosing backup and restore then backup.
g. Now when the backup is finished select install zip from SD Card
h. Navigate to your Custom rom you Already put on your sd card and select it by pressing the home button on your phone
i. Now the console will ask you do you want to continue, press yes.
j. Wait the Rom flashing to end.
k. Once finished go back to the main screen select “wipe data/factory reset” then press yes. Then select “wipe cache partition” and select yes. Then go to “advanced” then select “Wipe Dalvik Cache” press yes.
l. Now you can reboot you phone.
m. The first reboot usually takes time to finish.7. After full boot and configuration you will be successfully rooted/installed recovery/and flashed a new ROM to your phone.
RESERVED ...
Reserved too...
Big thanks to you man!
Question about the guide because I'm confused. Do you wipe data/factory reset (and so on) before or after flashing the ROM? Because from what I've read from other post you do it before flashing not after. Please enlighten a n00b like me.
It is preferable to be after the flashing as the rom
Sent from my U20i using XDA App
That's the reason why I'm getting lots of buggy installs. I will try that the next time I install a rom. Or maybe later when i install the new nAa kernel and ROM.
Thanks once again. Maybe ill do it before and after. LOL
demoniacs said:
That's the reason why I'm getting lots of buggy installs. I will try that the next time I install a rom. Or maybe later when i install the new nAa kernel and ROM.
Thanks once again. Maybe ill do it before and after. LOL
Click to expand...
Click to collapse
Making a complete wipe/factory reset should be after flashing the ROM.. N wiping before flashing the ROM dosn't make a difference.. N the bugs u feel are only if they are in the ROM/kernel n not the way u make a wipe.. So I guess it might have cleared your question well..
Sent from my U20i using xda premium
Fantastic!
Thanks a lot, my x10 is rooted!
But it only worked for me when I didn't press on "Charge phone": I left the screen like that.
Before, when I pressed "charge phone" the adb couldn't find my phone...
just let you know that, it could help someone else.
Again, thank you!
Inji.
Ps: I'm also a rooting addict now: just rooted my iconia a501 recently from the same great forum!
Thanks, worked great !
ClockWorkMod Recovery Installer for X10 Mini Pro by rect2409.
Requirements and credits are listed in the README.txt file.
Please make sure requirements are met before continuing.
Please make sure that your phone is connected to your PC and USB debugging
abled.
Press any key to continue . . .
Is your device ROOTed? (Y/N):Y
Starting ADB Server.
adb server is out of date. killing...
* daemon started successfully *
Pushing exploit to gain ROOT access.
adb server is out of date. killing...
* daemon started successfully *
** daemon still not runningerror: cannot connect to daemon
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
Mount system as R/W.
Do you already have a recovery installed? (Y/N):N
Pushing recovery tar file.
protocol failure
Pushing chargemon.
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
** daemon still not runningerror: cannot connect to daemon
Pushing busybox.
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
519 KB/s (735308 bytes in 1.382s)
Setting permissions for recovery tar file.
Unable to chmod /system/bin/recovery.tar: No such file or directory
Setting permissions for chargemon.
Setting permissions for busybox.
Mount system as read only.
Reboot phone.
Stopping ADB Server.
* server not running *
If no errors are listed above then CWM has been installed.
Finished.
Press any key to continue . . .
Hello everyone, Sorry for my english.
*
Here I wanted to be clever , but somehow I think I've made mistakes and I will need to have your help to know if my TF201 and dead or not . (Obviously longer under warranty ... )
*
So I was in the final version of the Asus Rom 4.1.1 JB .
*
I unlocked my TF201 using this method : matthill.eu/android/transformer-prime-tf201-jellybean-nvflash/
but I stopped before nvflahs manipulation .
*
I installed CM 10.1 here: download.cyanogenmod.org/?device=tf201&type=nightly
the latest and it worked
*
I finally wanted to change the flatline by CMW recovery or TWRP only by the above method and just renaming the flatline ... but it did not work , so I wanted to restart the recovery flatline the original file via usb mode, but I was too far and I clicked on flight + wipe data .
*
Since my TF201 reboot only the first white asus logo and bottom powered by nvidia .
*
Top I have unlocked device .
*
But impossible to get 4 icons RCK android usb and wipe by pressing power + vol - it only reboot the asus seems impossible to extinguish.
*
When I plug in usb it is no longer recognized by Windows unless I reboot in power + vol+ the screen is black on the TF201 it seems off and is recognized by APX windows seven .
*
I kept this folder :
AndroidRoot :
blob.bin
blob.log
bootloader.ebt
create.bct
pt_patch.log
pt_restore.log
recovery.bct
and after when my tf201 is bricked i have made on APX with nvflash but it seems too late :
bricksafe.img
factory-config.img
unlock-token.img
*
*
*
Do you think I can do something to at least regain access to recovery or install a new one .
*
I tested the hard reset with the small hole but nothing.
I tested the above method of flatline in APX but it indicates wainting for device.
I placed this file as an attachment and the cm10.1 rom on my sd card in the external keyboard but I do not know how to start all this .
*
Thank you for your help.
RECOVERY FOR ACE 4 SM-G316HU
____CWM RECOVERY____
based on v.6.0.3.x
Installation 1 :
VIA TERMINAL EMULATOR (Just for rooted phone)
download file I've provided below.
move/save in extSdCard
open terminal emulator
Type
Code:
su (enter)
type
Code:
dd if =/recovery.img of =/storage/extSdCard/dev/block/platform/sprd-sdhci. 3/by-name/RECOVERY (enter)
wait until the process is complete, if it is. ..
type
Code:
reboot reovery (enter)
completed..
Installation 2 :
(Just for unrooted phone)
Download odin and extract
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until detected on odin
Add the recovery_vivalto5mve3g.tar.md5 file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Wait until the flashing process is complete
Link :
recovery for terminal emulator
recovery for odin
Source :- https://github.com/AndiNR/android_device_samsung_vivalto5mve3g
bug :
in recovery vol down not work ,, use home button for down
Let me know if you find it
Special thanks to : Allah SWT and Nabi Muhammad SAW
CREDITS :
cyanogenmod team
@CTXz for help
andii_nr
my mother phone for test
IF YOU WANNA RESHARE THIS RECOVERY, PLEASE FOLLOW THIS RULES :
DON'T USE SHORTENER LINK (i.e. adfly, adfoc, etc)
DONT REUPLOAD MY RECOVERY BEFORE ASKING PERMISSIONS
Do not forget to donate/hit thank If you like my work
reserved #1
May it work on a *316 ML?
Edit:
stuck on first logo...
zenug said:
May it work on a *316 ML?
Edit:
stuck on first logo...
Click to expand...
Click to collapse
I also had the same question, and I can't test it since the download button from Yandex Disk doesn't work.
Please re-upload the images somewhere else, e.g. in a NextCloud instance or Mega.nz
EDIT: This was in my GNU/Linux PC running Iceweasel (Firefox-based) and with some extensions like uBlock, NoScript (but enabled JS), Disconnect, and HTTPS everywhere
works on Galaxy Ace 4 Neo SM-G136ML
Hello people! The truth did not know where to put this but if it's wrong because there is no problem and relocated!
I have a x900 LeTV I bought several months ago! Two weeks ago you installed a beta version of android 6.0.1. and I was working fine few days and one night, suddenly he went out and caught no more! Hard has a brick because no load, does not light, does not enter or fasboot recovey mode, any PC with any version of Windows recognizes it and have been for days following guidelines to resuscitate through QPST.2.7.429.msi without but although follow the steps one by one PC with Windows 7 simply does not recognize me! I am in despair and can not think of anything else! Some genius of the community could help me? There is a guide for x800 that is very similar to x900, yet still do not achieve much !!!
Same
Same issue, did u manage to fix it?
Hello dear all,
after a long time of rush*around different solutions I finally figure it out how to hard brick Indian le max x900
(note hard brick means ur phone is completely dead no charging,no restart, *no fastboot etc....becoz of may be wrong rom flashing)
1. Install qualcom driver and latest qpst 2.7*(link:*https://androiddatahost.com/np4wq)(qualcomm driver present in qfil file for x800 link in step4)
2. Installed qpst*will be present at c:/program files(x86)/qualcomm/qpst/bin....inside it find qfil flashing*application...open it
3. connect ur dead indian le max to computer and see if qualcomm usb driver can detect it(u may notice qfil flashing appln will also show some com no connected)....if u r unsuccessful just press both volume key/or power key and both vol key at a time for around 1 min when phone is connected to pc.*(in any case u failed no big issue try to install it manually by searching in google, well I have used win10 and it simply worked for me)
4. Download the qfil file for x800 and extract it somewhere, it also have qualcomm driver inside it so once extracted install that driver too (link:*https://mega.nz/#!G0ozxZwb!vowHBNjQGC1AtVOx2ThrWpYt6yHEnAACFvq90XDF4n0)....actually i tried qfil for x900,x1, line brush tutorials etc but none of those worked for me and x800 aks le 1 pro have the same processor so it can make x900 alive....sahara error all the time...*( a big thx to*UNBRICK X800 X900*Started by*mxmax)
5. if all done correctly u can see ur dead indian lemax*phone connected to qualcomm mode with some com no, that u can notice in qfil flashing appln.
6.in the flashing appln select Flat Build,
* * * * * * * * * * * * * * * * * * * * *in browse select ur extracted qfil x800 folder (path\qfil x800\x1_na_dvt1_fastboot\prog_emmc_firehose_8994_lite.mbn,
* * * * * * * * * * * * * * * * * * * * *in load xml select rawprogram_unsparse (present inside folder x1_na_dvt1_fastboot)....after that patch0 that automatically comes,
* * * * * * * * * * * * * * * * * * * * than finally click on download....u can see process started and once completed exit it.
7. So now ur phone have qfil of x800 flashed, try to boot it by pressing power button for 1 min.....u can see blue led blinked and ur phone start to boot (if not means ur phone's battery is very less simply connect it with charger by pressing power button u can see phone starts to show orange led flashing after some time....ie it start charging)
8. once it start in step 7 the phone show chinese letv logo...but it doesn't boot becoz it is for x800 not x900....phone simply tries to boot again and again...so once the phone start to reboot by itself simply press power button and vol down key at a time....u can see small penguin that means ur phone is in fastboot mode.
9. its time now to install twrp 3.0 to ur x900 connected to pc in fastboot mode(link:*https://www.androidfilehost.com/?fid=24533103863139522)...simply install twrp from link extract it open the twrp installer appln ....and install it by pressing backspace key that u find during instrution)....great thing about twrp recovery is it can charge ur phone too while connected to power source.
10.So after step 9 ur phone should be in twrp 3.0 recovery mode....u can see internal storage of it shows in pc of around 10 gb not 52 gb.....so inside twrp\wipe\format data...type yes, and advanced wipe select all and wipe......once done u have 52 gb avail in internal storage that u can see in ur pc too.
11. put indian version any rom inside ur internal storage and flash it...once done ur phone will successfully rebooted links for roms are below...simply download any as per ur choice
* * * * *https://drive.google.com/file/d/0B6m-wM0vYiL8U0U4cUhUM2NlMGc/view*(this is stock 12s rom)
* * * **https://www.androidfilehost.com/?fid=24533103863139959* (this is also stable 12s rom made bu cuoco with extra settings and dolby presinstalled)
* * * **http://evolutionletvx900.blogspot.in/* *(this will give u link for 12s and 13s rom which have nova and google launcher preinstalled)
* * flash any rom and if any any file after flashed make big vibrate ur phone with blue led on...don't panic...simply press power button for long time it will reboot ur phone
A big thx to memerbers of leeco.re for proving international support for leeco becoz it had gone from India, and I request u to make support for Indian x900 also since we cant able to install eui 5.8 based roms....tried to install several roms by deleting lines for check in update-script...even though it installed make it brick/dea again...so plz help for android 6*
Hi, I'm a x900 user
I have the same issue than some of you guys, my phone is detected in Qualcomm mode in QFIL, I have to charge the phone like an hour or two, I can tell its chargin because It has the blue led on, when it has no charge the led is blinking red and after sometime it becomes blue.
Put the phone in Qualcomm mode, download finish succesfully, pressed Vol Up + Power, my phone starts but with blue led and black screen, although its detected as a hard drive (LeTV), it'srecognized as an adb device (serial number ----- recovery). I ran the command "x1_na_fastboot" in command prompt inside folder CEXCNFN590......zip., I got rebooting in fast mode device, but it stops in "awaiting devices".
Thats were I'm stuck. Got any ideas?
2 Rahulraj2012
Thanks bro it is work exactly as you say !!! X900 Unbriked for now ;-)
I DON'T OWN THE DEVICE, AND THAT TWRP ISN'T TESTED YET
DOWNLOAD MODE (For Recovery Step)
• Make sure to have bootloader unlocked
1. Put USB driver
2. Shutdown your F41
3. Press & hold both vol + vol - keys
Recovery Download
- Download here
FLASHING RECOVERY
1. Download and open Odin tool
2. Click in AP Tab and select TWRP_3.4.0-0_F41.tar file
3. Click on start and wait
4. Flashed correctly you see pass message
Sources
Device Tree (Staging yet)
Team Win Recovery Project: For nice development and good custom recovery
Device Group
WARNING
If the TWRP don't boot, let me know via Telegram! I'm working in kernel, you can see here: https://github.com/samsungexynos9810/android_kernel_samsung_f41/commits/master, remember: It's broken by Samsung.
Brother Please explain me about , How to unlock bootloader for samsung f41? Please reply me brother.