Q&A for [Index Thread] Lenovo K3 Note (K50-t5)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Index Thread] Lenovo K3 Note (K50-t5). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Awesome and Thanks
I am grateful someone with experience is stepping up. I am still pretty new to customizing my phones. This K3 Note is the first Mediatek mobile device I have had. I must say the flashing method is way better then qualcomm, despite the support being far more limited. I have only one request, and I would be happy to contribute where and when I can. That request is to unlock basebands 2 and 4. I live in the US and my network connection is the worst I have ever seen. I am limited to a tertiary channel band support from ALL US service providers. It really sucks, I am lucky when the connection exceeds 80kbs, I haven't had a connection this slow since dial-up. Most apps like maps and weather do not even sync on the mobile network I can only use them on wifi. Please help.
---------- Post added at 04:26 PM ---------- Previous post was at 04:22 PM ----------
This K3 Note is the first Mediatek mobile device and I must say the flashing method is way better then qualcomm. Despite the support being far more limited in my region. I have only one request, and I would be happy to contribute where and when I can. That request is to unlock basebands 2 and 4. I live in the US and my network connection is the worst I have ever seen. I am limited to a tertiary channel band support from ALL US service providers. It really sucks, I am lucky when the connection exceeds 80kbs, I haven't had a connection this slow since dial-up. Most apps like maps and weather do not even sync on the mobile network I can only use them on wifi. Please help.
Help
Dear Friends,
I have a problem. I received Lenovo K3 Note MTK 6752.
But my lenovo is not octa core but only quad core.
Somebody can help me?
Why and what I must do for it become octa core?
Thanks a lots
Asiung
lenovo k3 note cuoco92 ROM v.1529
Hi Hackerpower, I have problem with notification of Viber app(other not tested), when is Viber open in background notification works OK but when I clear background app(pressing the 'broom' to free memory), I don't
recive notification at all, notification come when I open app.
In other ROM like Xancin V3 everything work's great! Any solutions for this issue?
I do dirty install(flash) of this ROM over previously installed v.1527.
Lenovo K3 Note Indian Version
Will these custom roms work on Indian version of K3 Note ? I am already rooted
BurntCircuitz said:
I am grateful someone with experience is stepping up. I am still pretty new to customizing my phones. This K3 Note is the first Mediatek mobile device I have had. I must say the flashing method is way better then qualcomm, despite the support being far more limited. I have only one request, and I would be happy to contribute where and when I can. That request is to unlock basebands 2 and 4. I live in the US and my network connection is the worst I have ever seen. I am limited to a tertiary channel band support from ALL US service providers. It really sucks, I am lucky when the connection exceeds 80kbs, I haven't had a connection this slow since dial-up. Most apps like maps and weather do not even sync on the mobile network I can only use them on wifi. Please help.
---------- Post added at 04:26 PM ---------- Previous post was at 04:22 PM ----------
This K3 Note is the first Mediatek mobile device and I must say the flashing method is way better then qualcomm. Despite the support being far more limited in my region. I have only one request, and I would be happy to contribute where and when I can. That request is to unlock basebands 2 and 4. I live in the US and my network connection is the worst I have ever seen. I am limited to a tertiary channel band support from ALL US service providers. It really sucks, I am lucky when the connection exceeds 80kbs, I haven't had a connection this slow since dial-up. Most apps like maps and weather do not even sync on the mobile network I can only use them on wifi. Please help.
Click to expand...
Click to collapse
I don't think anyone has figured out how to unlock mediatek lte bands yet.
I searched and found this: http://forum.xda-developers.com/redmi-note/general/unlock-lte-bands-step-step-xiaomi-mi-t3084774
http://forum.xda-developers.com/general/help/soc-based-universal-tool-to-unlock-lte-t3099086
Good luck.
lsiung said:
Dear Friends,
I have a problem. I received Lenovo K3 Note MTK 6752.
But my lenovo is not octa core but only quad core.
Somebody can help me?
Why and what I must do for it become octa core?
Thanks a lots
Asiung
Click to expand...
Click to collapse
Is this the rom that it came with when you bought it?
Have you tried flashing a stock rom through SP Flash Tool? It sounds like a bug from your rom, if it's 6752 it has to be octa core, 6732 is quad core.
bajsonja said:
Hi Hackerpower, I have problem with notification of Viber app(other not tested), when is Viber open in background notification works OK but when I clear background app(pressing the 'broom' to free memory), I don't
recive notification at all, notification come when I open app.
In other ROM like Xancin V3 everything work's great! Any solutions for this issue?
I do dirty install(flash) of this ROM over previously installed v.1527.
Click to expand...
Click to collapse
That's a problem with cuoco92 custom rom, ask him in his androidiani (link in my index) thread how to fix it.
iamsumitkumar said:
Will these custom roms work on Indian version of K3 Note ? I am already rooted
Click to expand...
Click to collapse
Yes, but you have to have a custom recovery to flash most of them.
Lenovo K3 Note "CWM/TWRP" ROM Install
Forgive me if this is not the place to ask, but ..... I found "Stock ROMs - Downloads and Tutorials" on reddit.com and the CWM/TWRP installation instructions are a bit different :
Extract the downloaded zip file.
Transfer extracted files onto your device/sdcard.
Boot into Custom Recovery mode.
Use the "Restore Backup" function with the extracted files.
Wipe you Data and Dalvik Cache partition.
Reboot.
..... comared to this (for example) :
Download the custom ROM copied to an external SD card root directory
While holding down:
– Power button + volume button up, to enter the recovery mode.
– Wipe Data / Factory Reset -> delete all user data
– Wipe Cache Partition -> Wipe cache
– Advanced -> Wipe Dalvik Cache
Return to recovery main interface Install zip from sdcard --> choose zip from sdcard --> Select your ROM
The "Restore Backup vs Install zip from sdcard" & "Wipe you Data and Dalvik Cache partition vs Wipe Data / Factory Reset, Wipe Cache, Wipe Dalvik Cache"
Is there a difference and why or is it just me? I just want to do it right. Thanks!
Which one is the best ?
I already flashed my Indian ROM using the SP Flash tool and have TWRP custom recovery installed and its working fine.....due to which I was able to change the screen density to 320 from the default by editing the built.prop.....but I am still not able to use xposed framework and viper4android fx...Can you suggest the rom which has these features along with the default ones ? Also the Dolby atmos does not work with any other music player than Google play music...I hope you can throw some light on this
Hello,
I would like to install this rom LiMoNcHeLo NovAMoD MDSTeam VibeAosP, which hackerpower himself is using atm.
But first I have a question about CWM recovery. Yesterday I flashed the CWM from kangel (official thread on k3 note), but I would like to flash the CWM by rootjunky. Can I just flash it via ADB fastboot like I did before or could I get problems flashing CWM over an existing CWM?
Another question that just came up, cause I just read about it in hackerpowers profile - xposed mod/framework - do I have to flash it at the same time I flash the rom or can I use the rom for a few weeks and then decide to flash xposed onto it?
Thank you very much!
And thank you hackerpower for the great work!
Daniel
iamsumitkumar said:
I already flashed my Indian ROM using the SP Flash tool and have TWRP custom recovery installed and its working fine.....due to which I was able to change the screen density to 320 from the default by editing the built.prop.....but I am still not able to use xposed framework and viper4android fx...Can you suggest the rom which has these features along with the default ones ? Also the Dolby atmos does not work with any other music player than Google play music...I hope you can throw some light on this
Click to expand...
Click to collapse
Dolby atmos works universally with any app. If you are speaking about poweramp, disable the Direct Volume control (DVC) under Audio settings of poweramp
G3ca7a said:
Forgive me if this is not the place to ask, but ..... I found "Stock ROMs - Downloads and Tutorials" on reddit.com and the CWM/TWRP installation instructions are a bit different :
Extract the downloaded zip file.
Transfer extracted files onto your device/sdcard.
Boot into Custom Recovery mode.
Use the "Restore Backup" function with the extracted files.
Wipe you Data and Dalvik Cache partition.
Reboot.
..... comared to this (for example) :
Download the custom ROM copied to an external SD card root directory
While holding down:
– Power button + volume button up, to enter the recovery mode.
– Wipe Data / Factory Reset -> delete all user data
– Wipe Cache Partition -> Wipe cache
– Advanced -> Wipe Dalvik Cache
Return to recovery main interface Install zip from sdcard --> choose zip from sdcard --> Select your ROM
The "Restore Backup vs Install zip from sdcard" & "Wipe you Data and Dalvik Cache partition vs Wipe Data / Factory Reset, Wipe Cache, Wipe Dalvik Cache"
Is there a difference and why or is it just me? I just want to do it right. Thanks!
Click to expand...
Click to collapse
Just to try and explain the methods you've listed:
#1 Someone has installed a ROM; and perhaps rooted it and added some scripts, mods etc. and then they have backed up this ROM in custom recovery and they've packed up and uploaded this backup (you will need to use the same recovery - and the files will need to be added to the same folder on the sdcard (TWRP/backup/ for example).
#2 Is a zipped ROM with a META-INF folder that tells the recovery what to do with the included files (system, boot (data) etc.)
#2 is preferred as it isn't dependant on a specific type of recovery...
iamsumitkumar said:
I already flashed my Indian ROM using the SP Flash tool and have TWRP custom recovery installed and its working fine.....due to which I was able to change the screen density to 320 from the default by editing the built.prop.....but I am still not able to use xposed framework and viper4android fx...Can you suggest the rom which has these features along with the default ones ? Also the Dolby atmos does not work with any other music player than Google play music...I hope you can throw some light on this
Click to expand...
Click to collapse
Xposed works on 5.0, links in my sig.
Never liked viper4android.
Dolby works with everything, maybe you uninstalled something you shouldn't have.
Barnlord said:
Hello,
I would like to install this rom LiMoNcHeLo NovAMoD MDSTeam VibeAosP, which hackerpower himself is using atm.
But first I have a question about CWM recovery. Yesterday I flashed the CWM from kangel (official thread on k3 note), but I would like to flash the CWM by rootjunky. Can I just flash it via ADB fastboot like I did before or could I get problems flashing CWM over an existing CWM?
Another question that just came up, cause I just read about it in hackerpowers profile - xposed mod/framework - do I have to flash it at the same time I flash the rom or can I use the rom for a few weeks and then decide to flash xposed onto it?
Thank you very much!
And thank you hackerpower for the great work!
Daniel
Click to expand...
Click to collapse
You can flash any recovery over another one, no problem. There are many recoveries that don't backup/restore properly be careful, and use the one's posted.
You can install/uninstall xposed framework whenever you want, after the first boot will take a long time.
Hi
Iam using this phone from 2 weeks.I flashed the indian Rom but i still have battery draining problem . I lose the full charge after 10 hours of normal use. The battery draining in this phone is very strange and i have never seen like it.
Well i am asking if there is a Rom that manages the battery backup in the best way.And Also the free Ram i am gotting in opening this phone is about 800 mb wich is strange also.
amiros2007 said:
Hi
Iam using this phone from 2 weeks.I flashed the indian Rom but i still have battery draining problem . I lose the full charge after 10 hours of normal use. The battery draining in this phone is very strange and i have never seen like it.
Well i am asking if there is a Rom that manages the battery backup in the best way.And Also the free Ram i am gotting in opening this phone is about 800 mb wich is strange also.
Click to expand...
Click to collapse
Install cpu spy plus and monitor the frequency. I believe your device is not going to deep sleep mode.
Also if no deep sleep install another app better battery stat and check the partial and kernel wakelock when not using the device. Try airplane mode and repeat above process. Finally if it doesn't figured, it is hardware problem, get it replaced
hackerpower said:
You can flash any recovery over another one, no problem. There are many recoveries that don't backup/restore properly be careful, and use the one's posted.
You can install/uninstall xposed framework whenever you want, after the first boot will take a long time.
Click to expand...
Click to collapse
Thanks for the reply hackerpower!
So just to make sure I'm goint to do the right steps in the right order:
After I installed the CWM recovery like rootjunky did in the video you linked in your description, I will do the follwing:
1. Make sure battery is fully charged and boot into recovery
2. backup and restore - backup
3. wipe cache partition
4. advanced - wipe dalvik cache
5. wipe data/factory reset
6. install zip from sdcard (LiMoNcHeLo NovAMoD MDSTeam VibeAosP - gapps already included, so there's no need to flash any gapps.zip)
7. the rom description says root 100%, do I need to flash SuperSU.zip at this point then?
8. restart - enjoy
Lenove K3 note Model K50a40 GPS not working properly
Last month I brought Lenove k3 note in india from Flipkart.
Following is my device information.
Model Number : Lenove K50a40
BaseBand Version :K50a40.LWG.V37,2015/05/21 09:44,2015/05/21 09:44
BuildNumber: K50a40_S117_150706_row
I am facing issue with GPS of this device. GPS is very inaccurate. GPS is quite slow to lock on, and seems to "try too hard" to maintain the lock. GPS position easily "dislocates" to the adjacent or another nearby road. With My old phone I was using Runtastic app and it was capturing distance correctly. Now it shows my location at random places and end up showing totally wrong map of my run session and distance estimates. I am highly disappointed from this phone due to this issue. Is there any fix for this issue?
K30-w
Hi. I have a Lenovo K3 lemon k30-w.
This room is compatible with my phone ?
Thanks
rom [LiMoNcHeLo NovAMoD MDSTeam VibeAosP] drain battery?
Now i flash custom rom : [LiMoNcHeLo NovAMoD MDSTeam VibeAosP] to my k3 note.
i feel this rom drain my battery when i use play game and internet.
who is like me?
Barnlord said:
Thanks for the reply hackerpower!
So just to make sure I'm goint to do the right steps in the right order:
After I installed the CWM recovery like rootjunky did in the video you linked in your description, I will do the follwing:
1. Make sure battery is fully charged and boot into recovery
2. backup and restore - backup
3. wipe cache partition
4. advanced - wipe dalvik cache
5. wipe data/factory reset
6. install zip from sdcard (LiMoNcHeLo NovAMoD MDSTeam VibeAosP - gapps already included, so there's no need to flash any gapps.zip)
7. the rom description says root 100%, do I need to flash SuperSU.zip at this point then?
8. restart - enjoy
Click to expand...
Click to collapse
1. Doesn't need to be fully charged, just don't have little like <20%
2. backup (boot, nvram, system, data)
3.4.5. advanced wipe (select everything except internal storage and sd card)
6.7.8 just flash rom, everything is already there, first boot takes a while.
Rakesh186 said:
Last month I brought Lenove k3 note in india from Flipkart.
Following is my device information.
Model Number : Lenove K50a40
BaseBand Version :K50a40.LWG.V37,2015/05/21 09:44,2015/05/21 09:44
BuildNumber: K50a40_S117_150706_row
I am facing issue with GPS of this device. GPS is very inaccurate. GPS is quite slow to lock on, and seems to "try too hard" to maintain the lock. GPS position easily "dislocates" to the adjacent or another nearby road. With My old phone I was using Runtastic app and it was capturing distance correctly. Now it shows my location at random places and end up showing totally wrong map of my run session and distance estimates. I am highly disappointed from this phone due to this issue. Is there any fix for this issue?
Click to expand...
Click to collapse
Flash the GPS glonass fix posted.
wilsonmorgado said:
Hi. I have a Lenovo K3 lemon k30-w.
This room is compatible with my phone ?
Thanks
Click to expand...
Click to collapse
No, you have K3, not K3 note. This thread is for K50 not K30.
http://gadgets.ndtv.com/lenovo-k3-2191-vs-lenovo-k3-note-2529
bestmobliethailand said:
Now i flash custom rom : [LiMoNcHeLo NovAMoD MDSTeam VibeAosP] to my k3 note.
i feel this rom drain my battery when i use play game and internet.
who is like me?
Click to expand...
Click to collapse
No battery drain here, it must be because of the apps you have running or because of your usage.
the new 1530 dev
i installed the new 1530 dev
i can't use the phone
every time say WLAN stop working
can't return again to cwm recovery
pc can't recognize the device to use adb flash tools
please help
Related
Hi
Sorry to post in here but im so new i cant use development forum yet.
I have noticed when charging my GT with this rom my battery status is not showing in the middle of the screen when the GT is powered off.
Anyone else seen this ??
also what are your setcpu settings on this rom (mine are 216 - 1400 interactive)
Cheers
Paul
vphotographic said:
Hi
Sorry to post in here but im so new i cant use development forum yet.
I have noticed when charging my GT with this rom my battery status is not showing in the middle of the screen when the GT is powered off.
Anyone else seen this ??
also what are your setcpu settings on this rom (mine are 216 - 1400 interactive)
Cheers
Paul
Click to expand...
Click to collapse
Mine works perfectly fine. Your setcpu settings should not matter in relation to your issue I don't think.
Im guessing will need to reflash the rom then to see if i get the battery icon when charging (gt powered off)
mine will display if for a bit, but shut off after a little while. It charges fine. This rom is awesome!
Hi
Ok, do you know the order for a clean install or a Rom that deletes all user folders and files as i seem to keep all my files when i do a wipe and reset ?
And list of things to do would be great
Paul
in Cwm, do:
- backup
- wipe data/factory reset (will wipe cache too)
- wipe dalvik cache
- flash new rom zip
- flash alternative kernel (if applicable)
- flash alternative themes, modded apps, etc (if applicable)
- reboot, set the tab down and go do something for 5 -10 min for it to do its first boot (mine is usually 7 min)
vphotographic said:
Hi
Ok, do you know the order for a clean install or a Rom that deletes all user folders and files as i seem to keep all my files when i do a wipe and reset ?
And list of things to do would be great
Paul
Click to expand...
Click to collapse
in order to start completely fresh is easy. you can be on any rom and to this. no need to go back to stock. just flash stock retail recovery here... (http://dl.dropbox.com/u/22014441/stockretail.tar.md5) with Odin (put it in the PDA slot). Then go into recovery (it will be the old blue one now) and wipe data/factory reset. Clockworkmod Recovery wont delete everything like stock retail will. Then you can flash back to Clockworkmod Recovery and reflash the rom you want.
---------- Post added at 09:33 AM ---------- Previous post was at 09:31 AM ----------
Tubes6al4v said:
in Cwm, do:
- backup
- wipe data/factory reset (will wipe cache too)
- wipe dalvik cache
- flash new rom zip
- flash alternative kernel (if applicable)
- flash alternative themes, modded apps, etc (if applicable)
- reboot, set the tab down and go do something for 5 -10 min for it to do its first boot (mine is usually 7 min)
Click to expand...
Click to collapse
this method won't do what he is asking bro. cwm doesn't delete everything as he is suggesting he wants to do. stock retail recovery is needed in order to start fresh.
In other news.....This actually the correct forum to post this in.
The development section is strictly for releases.
To stay on topic, the battery symbol does show up when charging while off on my tab and my setcpu settings are 216-1000MHz ondemand. The tab is BLAZINGLY fast now and there's a noticeable difference between V5 and V4.
Off topic, I just wanted to say that I've never posted or replied to anything here before. I've been a quiet studious learner of alot of stuff on here and started playing around with my OG Droid, then Droid X2, and HTC Thunderbolt, and now my Galaxy Tab 10.1. I've never posted or replied to anything because I've never been blown away by any developer's work (no insult, just nothing that REALLY made me go, “Thank God for this developer and their ROM.”
But when I installed In Paris V5…I literally thanked God for Task and Phantom. Task’s ROMs have been my faves and have definitely made my GTab experience move from fair (stock from store) to OK (Task’s last solo ROM) to GOOD (In Paris V4). But In Paris V5 has just made my GTab experience EXCELLENT. It’s ridiculously fast with no over-clocking needed! And not to steal from Apple (we all know I might get sued) but the thing just works now! If I weren’t so broke, I’d flood Task and Phantom with donations.
But sincerely…thank you Task and Phantom for producing, hands down, THE BEST ROM for the Galaxy Tab 10.1. You guys are phenomenal and if Google, or Samsung, were smart…you’d be on their payrolls. Please keep up the excellent work…I’m excited to see just what more you can do.
Sorry for this dumb question, but how to begin all of this, looks like the instruction is install CWM using Odin, any noob instruction for that?
I had rooted my Galaxy Tab 7 before using Odin, but I didn't went thru CWM. Any help on this appreciated. I prefer to use this Paris5 ROM. Thanks.
Hello everyone!
There's an official port of MIUIv5 for our P780 which can be found here.
It needs the Chinese base and not the International one, which means you need to have a Chinese stock ROM before flashing MIUI (flashing over the international stock rom ended in a bootloop for me).
I installed it a week ago and so far it's working flawlessly with a minor issue with the CSipSimple application (opening the Settings dialog causes FC). Didn't find any other bugs, running smooth on the P780 4GB version.
***BEFORE YOU CONTINUE***
Please note, I'm just sharing my own experience with the community, hoping this would be useful to someone.
I don't take any responsibility for any damage to your devices should you decide to follow the steps below!
What you do with the content of this thread is your own responsibility.
The external links are property of their respective authors and all credits go to them. Show your support by hitting the "Thanks" button in the bottom left corner of the respective post.
***
What I've done to run MIUI on the Lenovo P780 (4GB):
I. Backup
Since my phone came pre-rooted I didn't have to do it on my own. There's a good guide for rooting here. VibeROM can't be rooted via framaroot, so you'll have to find another way if you're running it and don't have root.
Download Mobileuncle Tools and backup your IMEI. I suggest keeping it somewhere safe in case of trouble.
Download MtK Droid Tools and backup your whole current ROM (takes a while) so you can flash it back with SmartPhone Flashtool later on if you decide.
II. Flash Chinese stock ROM
Download the Chinese S135 base stock rom along with the drivers and the flash tool from here and flash the S135 following the instructions provided.
Let the phone boot at least once. Copy the MIUI zip on the phone.
III. Flash MIUI
Reboot into recovery (shutdown the phone, then hold Power + Volume UP + Volume DOWN until you see the TEAMWIN logo). Perform a factory reset (Wipe Data + Cache) and Wipe Dalvik Cache.
Select Install and choose the MIUI zip archive, wait for it to flash.
Reboot phone and enjoy MIUI
IV. Some screenshots:
You can see them here.
Finally, I'd like to thank the authors of the threads and articles linked in this post.
Flashed everything works fine, but Second Sim is detected but not working, tried many permutations still the same.
Any info will b very useful, originally forms ROW firmware, help.. Urgent, need dual sim functionality very much
Sent from my iPad
Hi there drkrack,
Have you tried removing SIM1 and only leaving SIM2 in the phone? Is that working?
Since English is not my native language I can't understand what do you mean with "originally forms ROW firmware", can you explain?
The phone was with the ROW firmware when you flashed MIUI?
As far as I know MIUI is based on the chinese firmware so you'll have to flash that and if second sim is not working for you, you might have to flash only the modem from the ROW rom.
You can try replacing your modem driver with another one without reflashing the whole phone.
Check your current modem: Settings->All Settings->About phone-> Baseband version.
Mine's P780.V16, 2013/07/03 17:08 and both SIMs are working fine. You can try with some other versions though.
Backup your IMEIs with Mobileuncle Tools. This is very important because this information could be lost after replacing the modem driver!
Install ES File Explorer or Total Commander and give it root access.
Go to the /system/etc/firmware folder, you'll find a file named modem.img which is the current modem firmware.
Copy it over to the SD card just in case and replace it with another modem.
Download a new modem driver from [1] (sorry, can't post external links yet). I'm running V19 and both SIM cards are working just fine, but your mileage may vary.
After you move the file there be sure that the permissions are 644 (rw- r-- r--) (Owner: read+write, Group: read, Others: read).
Reboot the phone and hopefully you'll have both SIMs working.
Hope this helps,
good luck!
Credits for the Modem images to user belitov from androidbg.com.
[1] hxxps://mega.co.nz/#F!DkZg2BRZ!XsyBsDoB5sRdczecDvZuHw
Thanks for the reply it was a typo.. I meant originally from ROW firmware, flashed Chinese rom s123 and then tried MIUI v5,
All SIM Combinations I've tried, not detecting sim 2 at all.
Same problem with SLX ROM too,
Have a backup of IMEIs
Will try this modem driver img replacing and will let you know
Official MIUI V5 for 8gb P780
How to flash Official MIUI V5 on 8gb P780 ROW. I mean can we flash S135 and then Use TWRP to flash Official MIUI from en.miui.com ?
Thanks.
I using 8gb version. Try put life rom 07. Then flash miui v5 from here lenovo-forums.ru/topic/2073-miui-v5-jb-42-%D0%B4%D0%BB%D1%8F-ideaphone-p780-dual-sim-version/
Sent from my P780 using XDA Premium 4 mobile app
Is there gonna be new Miui above 4.4.25?
I've no idea, but hoping for it. There's already Android 4.4 for our P780 (which runs very smooth btw), but so far nothing from the MIUI team. Will keep you updated if I find something...
i goofed it up
Help me please anyone. I have never tried to fix a ROM to this kind of device before. I've always used HTC till now and I've goofed the install so bad that I can't reflash my back up. The recovery can't read the data or emmc partitions or internal storage. I don't know how to fix it. I can boot recovery but I can't flash anything or go back to my old ROM I was using 8 gb ROW 124 stock rooted TWRP. I can still get the system partition to mount. Any ideas how to fix it?
Yeah, read the other topics in this forum, good people have written fine guides for using MTK Smartphone flash tool to restore their phones. A rule of thumb is always keep your backups somewhere safe, e.g. PC hard disk or external storage card because when flashing the internal memory is at risk of breaking. Post to the relevant topic and good luck.
Load this modem
http://uloz.to/xu758iqP/modem-p780-v20-zip?do=downloadDialog-freeDownloadForm-submit
downloads are not working
On the website the download is not working. the download page shows broken code all down the page.
i got an error "no simcard detected", how to fix it, Help me please! thanks
Seavenes said:
i got an error "no simcard detected", how to fix it, Help me please! thanks
Click to expand...
Click to collapse
Look on settings/about phone on IMEI section and see what is written there.
stympy said:
Look on settings/about phone on IMEI section and see what is written there.
Click to expand...
Click to collapse
Dear stympy, I had finally flashed my p780 row using life rom and finally flashing MIUI using TWRP. Everything works fine except that the internal storage is now only 1 GB, it is so tight to squeeze anything in. Any workaround? Thanks beforehand.
Mr Lukman said:
Dear stympy, I had finally flashed my p780 row using life rom and finally flashing MIUI using TWRP. Everything works fine except that the internal storage is now only 1 GB, it is so tight to squeeze anything in. Any workaround? Thanks beforehand.
Click to expand...
Click to collapse
Hi. What MIUI did you flashed? What version? Do you have any sdcard?
Usually MIUI makes your sdcard internal memory.
Send from my Lenovo P1 Vibe Pro
stympy said:
Hi. What MIUI did you flashed? What version? Do you have any sdcard?
Usually MIUI makes your sdcard internal memory.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
I dont exactly remember which version it was, all I know it was MIUI 5, for redmi note if I had remembered correctly.
I have inserted a 16gb sd card. It is true that it was detected as phone memory. When I installed much apps to test if it has any effect when the internal storage runs out, the gallery and the camera started to acting up, at that time, the internal storage only have 99 mb.
Plus the mic is no longer working, when I make calls, the receiver hears only buzz. When I make a record, nothing recorded.
I love the UI already, but these problems bother me for days already. I hate to reflash stock rom back.
Mr Lukman said:
I dont exactly remember which version it was, all I know it was MIUI 5, for redmi note if I had remembered correctly.
I have inserted a 16gb sd card. It is true that it was detected as phone memory. When I installed much apps to test if it has any effect when the internal storage runs out, the gallery and the camera started to acting up, at that time, the internal storage only have 99 mb.
Plus the mic is no longer working, when I make calls, the receiver hears only buzz. When I make a record, nothing recorded.
I love the UI already, but these problems bother me for days already. I hate to reflash stock rom back.
Click to expand...
Click to collapse
Hi. Flash final stock firmware from Lenovo, S228 ROW. Install TWRP. After all that install latest MIUI, MIUI MINOVO.
I think is one of the best firmware here, made for our phones.
Unfortunately free system and data space it is a problem for this phone, because of the limited hardware.
You have those problems because you installed one KitKat firmware over Jellybean base firmware. This two are not compatible.
Good luck.
Send from my Lenovo P1 Vibe Pro
stympy said:
Hi. Flash final stock firmware from Lenovo, S228 ROW. Install TWRP. After all that install latest MIUI, MIUI MINOVO.
I think is one of the best firmware here, made for our phones.
Unfortunately free system and data space it is a problem for this phone, because of the limited hardware.
You have those problems because you installed one KitKat firmware over Jellybean base firmware. This two are not compatible.
Good luck.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
hi stympy, after the last attempt to revive my phone, finally I was able to boot up after using the 20 seconds trick, flashed the ROM that you suggested me to, finished flashing. The phone was booting up allright. suddenly after the lockscreen appears, it was died again. I have tried the 20 seconds trick repeatedly to revive the phone again, but all to no avail, I guess this is a hardware failure then?
what part(s) that would be damaged? any ideas?
i will take this p780 to a service center, I'd hate to be tricked by the service center. thanks before Sir Stympy
Mr Lukman said:
hi stympy, after the last attempt to revive my phone, finally I was able to boot up after using the 20 seconds trick, flashed the ROM that you suggested me to, finished flashing. The phone was booting up allright. suddenly after the lockscreen appears, it was died again. I have tried the 20 seconds trick repeatedly to revive the phone again, but all to no avail, I guess this is a hardware failure then?
what part(s) that would be damaged? any ideas?
i will take this p780 to a service center, I'd hate to be tricked by the service center. thanks before Sir Stympy
Click to expand...
Click to collapse
Hi. If you pressed 20 secconds on the red button, means that you hard resetted your phone. That means that could be a preloader problem. Try to reflash your stock firmware, so all could be new.
To answers to your question, usually the motherboard is the problem.
But first try to reflash your stock firmware and after flash see if you have to go to service store.
Good luck.
Send from my Lenovo P1 Vibe Pro
S6.Port-Version.V1 ,
there may be things that are not completely functional. I NOT responsible for any damage to your device or your information.
I can not scream loud enough YOU MUST INSTALL CLEAN NO DIRTY FLASH . .
I know you will have to set up all your apps oh well get over it !
wipe ALL and FORMAT (backup any needed data cuz format will erase it) [/SIZE] [/SIZE] [/SIZE][/COLOR][/COLOR][/SIZE]
ROM Information
**S6 Edge 5.1.1 Base
**Dev options on boot
** 5 Way Reboot Menu
***********************
From the stock N4 Edge
Added The Edge Screen ( Not all Options Working)
Added Adway
Added Dolby
Added kernel Adiutor (Test AT YOUR OWN RISK:silly:
Build Properties Tweks
Google DNS
camera_tweaks
Improve_battery
And More
SPECIAL THANKS TO THESE GUYS WITHOUT THEM THIS WOULDN'T BE POSSABLE
FREEZA =KERNEL
SAC23=FOR THE ROM
GEITI94
R-MILLER
GABESIR
Installation:
FOR ALL YOU NOOBS FLASHING ROM AFTER YOU DO A FULL CLEAN YOU NEED TO REBOOT YOUR RECOVERY OR WILL GIVE ERROR ......
(2) THE STATUS BAR CLOCK IS NOT MISSING ---YOU NEED TO GO TO SETTING /NORMA/SETTING/POTATO/CLOCK/CLOCK COLOR...PICK YOU COLOR /NEXT ALIGMENT..MOVE THE CLOCK TO THE LEFT /CENTER/ OR RIGHT
Make a backup ( dont come crying if you didn't)
NO DIRTY FLASH
Copy the rom to your phone
Install ROM (recommended clean wipe)
Wait for the initial boot ( takes 10-15 Mints )
Do Not Use Any Part From This Rom Without Sac23 OR My Permission
ROM LINK
REMOVE LINK WORKING ON A NEW PORT
AFTER YOU DO A FULL CLEAN YOU NEED TO REBOOT YOUR RECOVERY OR WILL GIVE ERROR
LINK
********my****
Good job paco [emoji106]
Downloaded Zip thru phone then redownloaded @ home Via PC still Error'd n TWRP after I transfer'vs zip 2 SDcard
Tried flashing via Twrp & it Error'd again
Said unable to FLASH ZIP due 2 binary error,
So I decide to flash sdcardfix & 'What do you know! Darn thing flash'd and is working perfect....!
1. Issue I've found there's a RED Border that flashs around Google Chrome when browsing
2. Staus bar Clock is missing .........Fix'd
3. I've been driving this ROM for a few hours now it SMOOTH!
It's reboot'd twice on me outta the blue & Top Right corner of phone been getting real hot , if That means anything 2 you. Its still alot better than stock rom heck I couldnt even gain root on stock 4 some reason so no complaints here
Awesome bro! looks nice! =)
Good Job!:good:
have you tried to use the SSU apk in this rom??, i have seen some other have manage to make it work on custom roms and android Lollipop
Tried to flash a few different times, md5 is good. If I Idont wipe anything and flash it boots fine. After that though I get systemUI and phone crashes. How ever though if I wipe there will be an error about symlinks not there.
Bump re'edit'ed 1st Post
Nice ROM
Ty 4 building this 4 us Sprinter's
whoppe862005 said:
Tried to flash a few different times, md5 is good. If I Idont wipe anything and flash it boots fine. After that though I get systemUI and phone crashes. How ever though if I wipe there will be an error about symlinks not there.
Click to expand...
Click to collapse
ok you need to to reboot the recovery before you flash the rom TWRP recovery give error the the flash zip is ok
ickyz said:
downloaded zip thru phone then redownloaded @ home via pc still error'd n twrp after i transfer'vs zip 2 sdcard
tried flashing via twrp & it error'd again
said unable to flash zip due 2 binary error,
so i decide to flash sdcardfix & 'what do you know! Darn thing flash'd and is working perfect....!
1. Issue i've found there's a red border that flashs around google chrome when browsing
2. Staus bar clock is missing or inoperable
Click to expand...
Click to collapse
(2) the status bar clock is not missing ---you need to go to setting /norma/setting/potato/clock/clock color...pick you color /next aligment..move the clock to the left /center/ or right
Wanna try it ....
Thanks. Finally got it up and running. So far so good. Got xposed and V4A working. Appreciate the work put into getting this over to this sprint variant. Will report back with logs should any issues arise.
i need you guys to test the hotspot see if working and connecting
paco_1 said:
i need you guys to test the hotspot see if working and connecting
Click to expand...
Click to collapse
I don't know if you included the Hotspot mod in this but if you use the method of adding the "dun" to the to APN'S through the sqlite editor the Hotspot works fine.
http://forum.xda-developers.com/not...roid-development/mods-sprint-hotspot-t3086579
This is the mod I am referencing.
Has anyone had any issues with lots of random reboots? Or any issues when using the camara?
kcnlos7 said:
Has anyone had any issues with lots of random reboots? Or any issues when using the camara?
Click to expand...
Click to collapse
Yes I have the same issues & after a few hours of phone being on it constantly rebootes
PEOPLE BE SURE & BACKUP YER PHONE + DATA + EFS & ANY OTHER FILES I know how hard this phones been if you dont backup ur file(s)You will have a paper weight
Is there any other user(s) experiencing the same REBOOTING issue after a few hours of use
I had 2 Backup to stock ROM because soon as it starts this issue , can't do anything but restore
When I ran this rom seemed good than I couldn't get Bluetooth to pair on my vehicle and than I couldn't get it to show anything on the homepage just the wallpaper and I could pull my notifications down but couldn't get settings to open.
I've been a huge fan of sac_23 on my S4 - sooo excited to try this out
Anybody get it to work?
Marshmallow for this device, keeps crashing as it is (com.android.phone, RIL). Getting the problem solved is easy, @puntoazul already written something like that, but I managed to get everything that has to be flashed in a single post.
Flash these files, in the next order, from top to bottom:
- A-GAPPS_6.0.1_09022016.zip - https://mega.nz/#!M99xiQbZ!fcclA9QDSXxxizsifu21MUbgMGsyRsNCCHPO4KrF5xQ (thanks to @puntoazul for packing it)
- APNFixer4CM13.zip - http://forum.xda-developers.com/attachment.php?attachmentid=3689957&d=1458482477 (thanks to @puntoazul for packing it)
- UNIVERSAL NFC DESTROYER - http://forum.xda-developers.com/attachment.php?attachmentid=3280610&d=1429942749 (thanks to @-CALIBAN666- for developing it), yeah, it's made for lollipop but works perfectly.
- Media.zip (codecs pack) http://forum.xda-developers.com/attachment.php?attachmentid=3680746&d=1457817927 (thanks to @EdwinMoq for packing it.)
When you're done, do a factory reset and reboot your device. Then, enjoy Marshmallow .
EDIT: Media.zip seems to be a mistyped step, I haven't found it and it wasn't needed to get a successful startup on my device.
EDIT: It seems like it's needed, anyways, I haven't found it, waiting for @EdwinMoq to answer.
EDIT: Added Media.zip, found at http://forum.xda-developers.com/opt...ogenmod-13-t3303671/post65803228#post65803228 ( @EdwinMoq 's post).
facuarmo said:
Marshmallow for this device, keeps crashing as it is (com.android.phone, RIL). Getting the problem solved is easy, @puntoazul already written something like that, but I managed to get everything that has to be flashed in a single post.
Flash these files, in the next order, from top to bottom:
- A-GAPPS_6.0.1_09022016.zip - https://mega.nz/#!M99xiQbZ!fcclA9QDSXxxizsifu21MUbgMGsyRsNCCHPO4KrF5xQ (thanks to @puntoazul for packing it)
- APNFixer4CM13.zip - http://forum.xda-developers.com/attachment.php?attachmentid=3689957&d=1458482477 (thanks to @puntoazul for packing it)
- UNIVERSAL NFC DESTROYER - http://forum.xda-developers.com/attachment.php?attachmentid=3280610&d=1429942749 (thanks to @-CALIBAN666- for developing it), yeah, it's made for lollipop but works perfectly.
- Media.zip (codecs pack) http://forum.xda-developers.com/attachment.php?attachmentid=3680746&d=1457817927 (thanks to @EdwinMoq for packing it.)
When you're done, do a factory reset and reboot your device. Then, enjoy Marshmallow .
EDIT: Media.zip seems to be a mistyped step, I haven't found it and it wasn't needed to get a successful startup on my device.
EDIT: It seems like it's needed, anyways, I haven't found it, waiting for @EdwinMoq to answer.
EDIT: Added Media.zip, found at http://forum.xda-developers.com/opt...ogenmod-13-t3303671/post65803228#post65803228 ( @EdwinMoq 's post).
Click to expand...
Click to collapse
Ive been experiencing the same problems you have, but i found my own alternate way. Since this phone isnt my daily driver, i used lucky patcher to remove the phone services app aka com.android.phone from the system.Everything is fixed, all stabilized and smooth. I still get crashing from phone and messaging storage,but no lag or stability issues. But ill try this anyway to try to completely remedy the crashing
As only two entries for Orange seem to be missing in the APN database: Does everyone need that fix because the APN list is totally corrupted by this, or only certain Orange customers?
Elite.101 said:
Ive been experiencing the same problems you have, but i found my own alternate way. Since this phone isnt my daily driver, i used lucky patcher to remove the phone services app aka com.android.phone from the system.Everything is fixed, all stabilized and smooth. I still get crashing from phone and messaging storage,but no lag or stability issues. But ill try this anyway to try to completely remedy the crashing
Click to expand...
Click to collapse
Okay, please let me know what happened when you're done.
lecorbusier said:
As only two entries for Orange seem to be missing in the APN database: Does everyone need that fix because the APN list is totally corrupted by this, or only certain Orange customers?
Click to expand...
Click to collapse
For a better stability, you must flash it. For example, running this ROM without this patch, the RIL keeps crashing, taking in mind that Movistar and Tuenti (a lesser know Argentina provider, a recently started provider), are not being detected.
I'll wait for the next build. Then probably use it as a Wireless AP, as there are huge problems resulting from the small data partition and Ram. I still hope that MMs z-buffer feature provides some solution. This whole mess started about half a year ago and getting worse, on the L9 and a similarly featured tablet with CM11, so it's not the rom's fault. The tablet has plenty of space on the data partition, however, but ram and SoC face similar problems.
My current wireless AP is an Iphone 4s with only 0,5GB Ram. And it's is still working reliably, no apps freezing and fcing, and I can access websites which will make Firefox on the L9 and said tablet quit every time.
All the affected apps seem to deal with HTML code and are supposed to use the system webview engine. Updating the Google webview engine is possible with CM12.1 and 13, but to no avail, only taking space on the data partition.
facuarmo said:
Okay, please let me know what happened when you're done.
Click to expand...
Click to collapse
Well. I tried it. No crashing at all with A-Gapps or Gapps mini
But I kept getting kernel panics,even while charging.So I reverted to my system modified nandroid backup in which I uninstalled Phone services aka com.Android. phone and disabled Phone and messaging storage app.
Elite.101 said:
Well. I tried it. No crashing at all with A-Gapps or Gapps mini
But I kept getting kernel panics,even while charging.So I reverted to my system modified nandroid backup in which I uninstalled Phone services aka com.Android. phone and disabled Phone and messaging storage app.
Click to expand...
Click to collapse
Follow this http://forum.xda-developers.com/showpost.php?p=65892603&postcount=395
As i have previously explained in original thread all of these files in a single go. with order defined
1) Goto TWRP recovery can also use new TWRP 3.0.2.0 (i have already installed marshmallow without any errors)
2) Wipe system, Cache and Davic
3) Flash rom
4) Flash Media.zip
5) Flash A-GAPPS_6.0.1_09022016.zip
6) Flash APNFixer4CM13.zip
7) If you have a p768 flash campatch
Also flashed NFC Destroyer so that on booting for the first time... i did'n encountered any error at all.. i have been using this ROM as my daily driver and never encountered any kernel panic or ant other error also i didn't faced any rotation problem. its working fine as it should be. Only thing i am concerned about is battery, it drains very fast, tweaking with kernel auditor didn't help me either. other then this i haven't faced any problem, everything is working fine, i'm able to install Xposed framework without any problem.. Great work......
I have also tried this with New TWRP Recovery.... worked like a charm
Elite.101 said:
Well. I tried it. No crashing at all with A-Gapps or Gapps mini
But I kept getting kernel panics,even while charging.So I reverted to my system modified nandroid backup in which I uninstalled Phone services aka com.Android. phone and disabled Phone and messaging storage app.
Click to expand...
Click to collapse
Can you tell me your real phone model? There're some hard incompatibilities between the P760 and the P769.
Codeplex said:
Follow this http://forum.xda-developers.com/showpost.php?p=65892603&postcount=395
As i have previously explained in original thread all of these files in a single go. with order defined
1) Goto TWRP recovery can also use new TWRP 3.0.2.0 (i have already installed marshmallow without any errors)
2) Wipe system, Cache and Davic
3) Flash rom
4) Flash Media.zip
5) Flash A-GAPPS_6.0.1_09022016.zip
6) Flash APNFixer4CM13.zip
7) If you have a p768 flash campatch
Also flashed NFC Destroyer so that on booting for the first time... i did'n encountered any error at all.. i have been using this ROM as my daily driver and never encountered any kernel panic or ant other error also i didn't faced any rotation problem. its working fine as it should be. Only thing i am concerned about is battery, it drains very fast, tweaking with kernel auditor didn't help me either. other then this i haven't faced any problem, everything is working fine, i'm able to install Xposed framework without any problem.. Great work......
I have also tried this with New TWRP Recovery.... worked like a charm
Click to expand...
Click to collapse
Well, ill try this.The way i tried this was in a different order, but pretty much i have the phone under control since i uninstalled com.android.phone aka Phone Services and disabled Phone and messaging storage.
but i guess ill try this.i need the exact correct order with NFC Destroyer in the list in order of flashing.
---------- Post added at 01:31 PM ---------- Previous post was at 01:30 PM ----------
facuarmo said:
Can you tell me your real phone model? There're some hard incompatibilities between the P760 and the P769.
Click to expand...
Click to collapse
I currently Have the LG-P769. T-Mobile variant
Elite.101 said:
Well. I tried it. No crashing at all with A-Gapps or Gapps mini
But I kept getting kernel panics,even while charging.So I reverted to my system modified nandroid backup in which I uninstalled Phone services aka com.Android. phone and disabled Phone and messaging storage app.
Click to expand...
Click to collapse
Flash in this order (works for me every time)
1) Goto TWRP recovery can also use new TWRP 3.0.2.0 (i have already installed marshmallow without any errors)
2) Wipe system, Cache and Davic
3) Flash rom
4) Flash Media.zip
5) Flash A-GAPPS_6.0.1_09022016.zip
6) Flash APNFixer4CM13.zip
7) NFC Destroyer
and reboot..
Codeplex said:
Flash in this order (works for me every time)
1) Goto TWRP recovery can also use new TWRP 3.0.2.0 (i have already installed marshmallow without any errors)
2) Wipe system, Cache and Davic
3) Flash rom
4) Flash Media.zip
5) Flash A-GAPPS_6.0.1_09022016.zip
6) Flash APNFixer4CM13.zip
7) NFC Destroyer
and reboot..
Click to expand...
Click to collapse
Alright. Ill try this right now.Ima do a backup first.
Codeplex said:
Flash in this order (works for me every time)
1) Goto TWRP recovery can also use new TWRP 3.0.2.0 (i have already installed marshmallow without any errors)
2) Wipe system, Cache and Davic
3) Flash rom
4) Flash Media.zip
5) Flash A-GAPPS_6.0.1_09022016.zip
6) Flash APNFixer4CM13.zip
7) NFC Destroyer
and reboot..
Click to expand...
Click to collapse
im still having problems. i just finished setting up and now i have a kernel panic.......reverting now
Elite.101 said:
Well, ill try this.The way i tried this was in a different order, but pretty much i have the phone under control since i uninstalled com.android.phone aka Phone Services and disabled Phone and messaging storage.
but i guess ill try this.i need the exact correct order with NFC Destroyer in the list in order of flashing.
---------- Post added at 01:31 PM ---------- Previous post was at 01:30 PM ----------
I currently Have the LG-P769. T-Mobile variant
Click to expand...
Click to collapse
The kernel panics that you're experiencing, are also being faced by most of the people who has tried the P760 build in the P769, please check the ROM @EdwinMoq 's post and download the special build for this model, and try again. Then, please tell me how it goes.
facuarmo said:
The kernel panics that you're experiencing, are also being faced by most of the people who has tried the P760 build in the P769, please check the ROM @EdwinMoq 's post and download the special build for this model, and try again. Then, please tell me how it goes.
Click to expand...
Click to collapse
Well specifically, i used the p769 version. i tried apn fixer, nfc destroyer and media.zip, but the problem persisted. so i just reverted back to my nandroid backup in which i uninstalled com.android.phone aka phone services and disabled phone and messaging storage.I have it stable this way without kernel panics and using gapps mini since this isnt my daily driver. My galaxy core prime is SMG360T1.
Elite.101 said:
Well specifically, i used the p769 version. i tried apn fixer, nfc destroyer and media.zip, but the problem persisted. so i just reverted back to my nandroid backup in which i uninstalled com.android.phone aka phone services and disabled phone and messaging storage.I have it stable this way without kernel panics and using gapps mini since this isnt my daily driver. My galaxy core prime is SMG360T1.
Click to expand...
Click to collapse
Hmmm... Idk, sorry. That's what I've learned from here, not much atm haha.
facuarmo said:
Hmmm... Idk, sorry. That's what I've learned from here, not much atm haha.
Click to expand...
Click to collapse
True.one thing I want fixed is the headphones problem where sound goes to speaker
Elite.101 said:
True.one thing I want fixed is the headphones problem where sound goes to speaker
Click to expand...
Click to collapse
That's quite strange, seems like a bad kernel. For me, using the P760 (in the P778g, Argentina, LATAM) works fine, both speakers (front and rear) and headphones.
When the headphone amp starts to clip/overdrive, this is accompanied by an unplugging event for the headphones. Artas' CM11 and CM12.1 are affected, too, but I could get my P760 to work with decent and stable sound output. While in Rammar's PA sound volume was even lower than with the stock rom(too low for even bothering to take the headphones with me) , CM12.1 is loudest. In order to not accidentially trip clipping and unplugging events, which will also reset volume to safety level, requiring to turn it up and clip again etc etc, Ilimited max volume to 80% in the Headset Button Controller app,which allows to control volume via headset mic button.
Hi, my friends.
Great news . The new official update Leeco that has come in Indian web finally brings everything to their phones sold worldwide:
- Multilanguage. But, really. All are translated (I only tried Spanish, I assume that the other languages also). In Europe only translate to Spanish, English and French. The rest are Asian languages.
- Leeco Account. Integrated with Google account, as it should be. Leeco access to the entire EUI universe. Synchronization of our contacts, photos, etc.
- All active applications, including Leeco LIVE, Levidi, Leview ...
- Google for Works integrated with Gmail Exchange account, Play Music, Play Video, Google+, Yotube .
Only rest check battery perfomance, but ROM it´s smooth and powerful.
Download links:
Official: http://g3.letv.cn/209/7/47/letv-hdtv/0/upload/tmp/20160706171018829/LE_X2_X820-OS-OP-FGXOSOP5801507066S-5.8.015S.zip?b=123456&platid=5&splatid=500
Mega: https://mega.nz/#!wtplFRIQ!l5V9p8PtpmqEznqQjkm9vFNG6LCgM-KrpEDbTShiwn0
Enjoy ¡¡¡
yes, it's a good one. just installed no problems so far.
I had a problem with previous stock versions that 4G speed had some hickups....when I was downloading (for example from google store) it paused for 30 seconds..sometimes longer.
tried SIM in slot 2 and vice versa..but problem remains.
now it goes smoothly without pauses (so far)
also had the CM13 which is almost the best, apart from the sound bug...definitely one I want on this phone for a long time..if sound thingy is fixed.
thanks!
Recommendation Do Not Use India version
This version apparently has data encryption enabled and will not show a viable data partition. This will cause TWRP to fail and subsequent attempts at root or installation of other roms.
jim262 said:
This version apparently has data encryption enabled and will not show a viable data partition. This will cause TWRP to fail and subsequent attempts at root or installation of other roms.
Click to expand...
Click to collapse
Hmm..Ok! phone is encrypted indeed..do you know if there's as a way to decrypt or turn it off.?twrp is asking for a password when going onto recovery now...in previous roms the encrypt option was not greyed out.
or is only way to get in twrp and wipe everything.
Thanks !
jim262 said:
This version apparently has data encryption enabled and will not show a viable data partition. This will cause TWRP to fail and subsequent attempts at root or installation of other roms.
Click to expand...
Click to collapse
What is the way around the issue of encryption? So we can never install TWRP ever?
sanke1 said:
What is the way around the issue of encryption? So we can never install TWRP ever?
Click to expand...
Click to collapse
Under TWRP data it´s encrypted. But under Windows not. Copy to your computer all files that you need save (photos, music, etc.), and then format data in TWRP.
jim262 said:
This version apparently has data encryption enabled and will not show a viable data partition. This will cause TWRP to fail and subsequent attempts at root or installation of other roms.
Click to expand...
Click to collapse
Under windows DATA partition works properly, copy all your files (photos, music, etc.) into computer and then enter TWRP and format DATA.
This ROM it´s better that anyone, I think that worth trying. It´s awesome.
STEVE_MARS said:
Under windows DATA partition works properly, copy all your files (photos, music, etc.) into computer and then enter TWRP and format DATA.
This ROM it´s better that anyone, I think that worth trying. It´s awesome.
Click to expand...
Click to collapse
I wold'n say that his rom is better than others, here is still missing the multilingual support and so on. I'm atm with "Revolution 15s EUI 5.8 by TeaMSpaiN" alsolutely happy, just litte fine tuned and see my benchmark with over 143.000 points (first run). And yes the rom is smooth as hell.
Antutu proof pic:
http://www.pic-upload.de/view-31202011/Screenshot_20160714-071230.jpg.html
NU_User said:
I wold'n say that his rom is better than others, here is still missing the multilingual support and so on. I'm atm with "Revolution 15s EUI 5.8 by TeaMSpaiN" alsolutely happy, just litte fine tuned and see my benchmark with over 143.000 points (first run). And yes the rom is smooth as hell.
Antutu proof pic:
http://www.pic-upload.de/view-31202011/Screenshot_20160714-071230.jpg.html
Click to expand...
Click to collapse
:angel: yes, we developed Revolution series :good:. But I recommended you that try this Indian version .
STEVE_MARS said:
:angel: yes, we developed Revolution series :good:. But I recommended you that try this Indian version .
Click to expand...
Click to collapse
no
---------- Post added at 10:53 AM ---------- Previous post was at 10:25 AM ----------
@STEVE
if you want help you can try to fix the CM13 rom, THIS one, if would been fixed where of course the ultimare rom for our little beast.
STEVE_MARS said:
Under windows DATA partition works properly, copy all your files (photos, music, etc.) into computer and then enter TWRP and format DATA.
This ROM it´s better that anyone, I think that worth trying. It´s awesome.
Click to expand...
Click to collapse
You did not understand my question properly.
Right now, there is absolutely NO way to install TWRP on Indian X821 model. I cannot format DATA without installing TWRP.
All the TWRPs available on this forum give a BLOD (Blue Led of Death) The screen remains blank but powered on. The Blue LED light remains. There is another guy who is having the same problem and he has created a separate topic for it.
We can restart the phone normally but the installed TWRP gets overwritten with stock recovery.
atm here is no solution for your device, you need to wait until a developer create a TWRP compatible for your device.
sanke1 said:
You did not understand my question properly.
Right now, there is absolutely NO way to install TWRP on Indian X821 model. I cannot format DATA without installing TWRP.
All the TWRPs available on this forum give a BLOD (Blue Led of Death) The screen remains blank but powered on. The Blue LED light remains. There is another guy who is having the same problem and he has created a separate topic for it.
We can restart the phone normally but the installed TWRP gets overwritten with stock recovery.
Click to expand...
Click to collapse
What I did was to go into settings -> fingerprint -> -> other security options -> trusted credentials and disabled the credentials. You have to do this one by one as the clear all option is grayed out. From there I went into and fast boot and flashed TWRP recovery. I rebooted immediately to RECOVERY wiped everything on internal storage. I then transfered a ROM to storage and flashed normally. All is working again and TWRP and root are functioning.
WTF, ok it is a security related issue?
jim262 said:
What I did was to go into settings -> fingerprint -> -> other security options -> trusted credentials and disabled the credentials. You have to do this one by one as the clear all option is grayed out. From there I went into and fast boot and flashed TWRP recovery. I rebooted immediately to RECOVERY wiped everything on internal storage. I then transfered a ROM to storage and flashed normally. All is working again and TWRP and root are functioning.
Click to expand...
Click to collapse
I flashed old 14S Chinese ROM and then flashed recovery. My phone shows X820 now. I guess X820 and X821 may be just the same. It's the Chinese Roms show X820 and Indian Rom shows X821.
BTW I am on TeamSpain's CM Rom. Working good except charging.
If I used my Aukey QC 3.0 charger, the LED flashed like crazy and Ampere current measuring App showed 4680 mAh charging current and was climbing. (QC 3.0 shouldn't exceed 3000 mAh) So I immediately disconected it. Gave me a scare for a moment. Normal charging is slow but no LED blinking and feels safer.
NU_User said:
WTF, ok it is a security related issue?
Click to expand...
Click to collapse
Not a security. Just a way for Indian Dev's to prevent users from messing with their OS and to keep users on 100% stock.
STEVE_MARS said:
Hi, my friends.
Great news . The new official update Leeco that has come in Indian web finally brings everything to their phones sold worldwide:
Enjoy ¡¡¡
Click to expand...
Click to collapse
So can someone clarify if there's a way to clean install this ROM on a Chinese version of the phone and have a) TWRP b) ROOT working or is that impossible for now?
Exactly the same way as you install any other ROM. I have a Chinese phone and installed this ROM and uninstalled it because of its encrypted. Yes, the le-bloat is gone, but you will be unable to install TWRP or root because of the encryption.
jim262 said:
Exactly the same way as you install any other ROM. I have a Chinese phone and installed this ROM and uninstalled it because of its encrypted. Yes, the le-bloat is gone, but you will be unable to install TWRP or root because of the encryption.
Click to expand...
Click to collapse
Copy all your files (photos, videos, music, etc.) under Windows and enter TWRP, format DATA, reboot system, configure setupwizard, reboot TWRP again and copy supersu. zip and flash it.