S6-rom-port-edge-v2 - Sprint Note Edge Android Development

S6.Port-Version.V1 ,
there may be things that are not completely functional. I NOT responsible for any damage to your device or your information.
I can not scream loud enough YOU MUST INSTALL CLEAN NO DIRTY FLASH . .
I know you will have to set up all your apps oh well get over it !
wipe ALL and FORMAT (backup any needed data cuz format will erase it) [/SIZE] [/SIZE] [/SIZE][/COLOR][/COLOR][/SIZE]
ROM Information
**S6 Edge 5.1.1 Base
**Dev options on boot
** 5 Way Reboot Menu
***********************
From the stock N4 Edge
Added The Edge Screen ( Not all Options Working)
Added Adway
Added Dolby
Added kernel Adiutor (Test AT YOUR OWN RISK:silly:
Build Properties Tweks
Google DNS
camera_tweaks
Improve_battery
And More
SPECIAL THANKS TO THESE GUYS WITHOUT THEM THIS WOULDN'T BE POSSABLE
FREEZA =KERNEL
SAC23=FOR THE ROM
GEITI94
R-MILLER
GABESIR
Installation:
FOR ALL YOU NOOBS FLASHING ROM AFTER YOU DO A FULL CLEAN YOU NEED TO REBOOT YOUR RECOVERY OR WILL GIVE ERROR ......
(2) THE STATUS BAR CLOCK IS NOT MISSING ---YOU NEED TO GO TO SETTING /NORMA/SETTING/POTATO/CLOCK/CLOCK COLOR...PICK YOU COLOR /NEXT ALIGMENT..MOVE THE CLOCK TO THE LEFT /CENTER/ OR RIGHT
Make a backup ( dont come crying if you didn't)
NO DIRTY FLASH
Copy the rom to your phone
Install ROM (recommended clean wipe)
Wait for the initial boot ( takes 10-15 Mints )
Do Not Use Any Part From This Rom Without Sac23 OR My Permission
ROM LINK
REMOVE LINK WORKING ON A NEW PORT
AFTER YOU DO A FULL CLEAN YOU NEED TO REBOOT YOUR RECOVERY OR WILL GIVE ERROR
LINK

********my****

Good job paco [emoji106]

Downloaded Zip thru phone then redownloaded @ home Via PC still Error'd n TWRP after I transfer'vs zip 2 SDcard
Tried flashing via Twrp & it Error'd again
Said unable to FLASH ZIP due 2 binary error,
So I decide to flash sdcardfix & 'What do you know! Darn thing flash'd and is working perfect....!
1. Issue I've found there's a RED Border that flashs around Google Chrome when browsing
2. Staus bar Clock is missing .........Fix'd
3. I've been driving this ROM for a few hours now it SMOOTH!
It's reboot'd twice on me outta the blue & Top Right corner of phone been getting real hot , if That means anything 2 you. Its still alot better than stock rom heck I couldnt even gain root on stock 4 some reason so no complaints here

Awesome bro! looks nice! =)
Good Job!:good:

have you tried to use the SSU apk in this rom??, i have seen some other have manage to make it work on custom roms and android Lollipop

Tried to flash a few different times, md5 is good. If I Idont wipe anything and flash it boots fine. After that though I get systemUI and phone crashes. How ever though if I wipe there will be an error about symlinks not there.

Bump re'edit'ed 1st Post
Nice ROM
Ty 4 building this 4 us Sprinter's

whoppe862005 said:
Tried to flash a few different times, md5 is good. If I Idont wipe anything and flash it boots fine. After that though I get systemUI and phone crashes. How ever though if I wipe there will be an error about symlinks not there.
Click to expand...
Click to collapse
ok you need to to reboot the recovery before you flash the rom TWRP recovery give error the the flash zip is ok

ickyz said:
downloaded zip thru phone then redownloaded @ home via pc still error'd n twrp after i transfer'vs zip 2 sdcard
tried flashing via twrp & it error'd again
said unable to flash zip due 2 binary error,
so i decide to flash sdcardfix & 'what do you know! Darn thing flash'd and is working perfect....!
1. Issue i've found there's a red border that flashs around google chrome when browsing
2. Staus bar clock is missing or inoperable
Click to expand...
Click to collapse
(2) the status bar clock is not missing ---you need to go to setting /norma/setting/potato/clock/clock color...pick you color /next aligment..move the clock to the left /center/ or right

Wanna try it ....

Thanks. Finally got it up and running. So far so good. Got xposed and V4A working. Appreciate the work put into getting this over to this sprint variant. Will report back with logs should any issues arise.

i need you guys to test the hotspot see if working and connecting

paco_1 said:
i need you guys to test the hotspot see if working and connecting
Click to expand...
Click to collapse
I don't know if you included the Hotspot mod in this but if you use the method of adding the "dun" to the to APN'S through the sqlite editor the Hotspot works fine.
http://forum.xda-developers.com/not...roid-development/mods-sprint-hotspot-t3086579
This is the mod I am referencing.

Has anyone had any issues with lots of random reboots? Or any issues when using the camara?

kcnlos7 said:
Has anyone had any issues with lots of random reboots? Or any issues when using the camara?
Click to expand...
Click to collapse
Yes I have the same issues & after a few hours of phone being on it constantly rebootes

PEOPLE BE SURE & BACKUP YER PHONE + DATA + EFS & ANY OTHER FILES I know how hard this phones been if you dont backup ur file(s)You will have a paper weight
Is there any other user(s) experiencing the same REBOOTING issue after a few hours of use
I had 2 Backup to stock ROM because soon as it starts this issue , can't do anything but restore

When I ran this rom seemed good than I couldn't get Bluetooth to pair on my vehicle and than I couldn't get it to show anything on the homepage just the wallpaper and I could pull my notifications down but couldn't get settings to open.

I've been a huge fan of sac_23 on my S4 - sooo excited to try this out

Anybody get it to work?

Related

[ROM][MIUI][GB][STOCK]Noisyfox's MIUI GB 2.3.xx Ver 01b

This is a MIUI GB 2.3.xx rom ported from stock ZCPK9(China version) rom with miui patchrom.
---FLASH AT YOUR OWN RISK---
I'm now busy preparing for college entrance exam so I won't (perhaps) continue develop before I get into college
Not working:
GPS(Don't know why)
Not perfect:
Theme
DownloadProviderUI
SideKick
ClockPackage
Default language is Chinese.
App2SD(Cause reboot every time when you switch an App between SD and internal memory but actually it has operated successfully)
Ugly statusbar transparent.
Not proted now(All using stock one):
MIUI Settings
MIUI Camera
MIUI SoundRecorder
MIUI SuperUser
MIUI FileManager
MIUI Browser
MIUI Gallery3D
(And some other MIUI apps)
Features:
All MIUI features except that mentioned above (plus that I forgot and not find).
GUI installer by Aroma.
Optional Ad-hoc patch, Gapps, no keyboard light patch, USA keyboard patch.
Something wonderful:
Press home at lock screen to turn on torch.
Press home + back at same time to take screenshot.
Press menu + volum up to turn background light max(temporary).
Thanks to:
Myself , MIUI team and friends at XDA and Sdapk.
How to install:
1. Make sure you have rj's or Entropy512's installed. This rom does not contain kernel.
2. Download rom and place in your sdcard.
3. Reboot into recovery.
4. Wipe /data as well as anything else if you are first install this rom.IMPORTANT!
5. Choose install zip and this will start Aroma Installer.
6. Choose any patch you like in Aroma Installer and finish install it.
7. You will reboot automatically.
8. Be patient while first boot up.
9. Congratulations!
Screenshots:
Change log:
Code:
MIUI.2.3.xx.Noisyfox.01b
Fixed FC when headset plug in
Add USA keyboard patch
MIUI.2.3.xx.Noisyfox.01a
Fixed Settings Fail After Wipe /data
MIUI.2.3.xx.Noisyfox.01
Initial Release
Download:
https://github.com/Noisyfox/patchrom_GalaxyPlayer5.0/downloads
Develop:
If you are interested in this project, you can get fully source code from here:
https://github.com/Noisyfox/patchrom_GalaxyPlayer5.0
Hey how do we change it back to English in this ROM? And what do you mean by "Theme" is not working perfect? It is working partly or are there any bugs!
Thanks
Rom is perfect for me , but slow .
I have INTL device , which kernel is better for me Rumirand's or your patched kernel?
anil_kilic said:
Rom is perfect for me , but slow .
I have INTL device , which kernel is better for me Rumirand's or your patched kernel?
Click to expand...
Click to collapse
rj's is better.
pmdisawesome said:
Hey how do we change it back to English in this ROM? And what do you mean by "Theme" is not working perfect? It is working partly or are there any bugs!
Thanks
Click to expand...
Click to collapse
It works partly.
This is sweet, good job!!
I followed instructions to the letter. Seemed to flash fine but it is now sitting at the black Samsung screen screen for about 20 minutes. How long has it taken for 1st boot? Tried re-flashing, clearing cache, etc.
change your kernel to rj's kernel and flash again.
rj's kernel says it is for International SGP not US. My SGP is US so I am not sure if this kernel will work.
tsg2513 said:
rj's kernel says it is for International SGP not US. My SGP is US so I am not sure if this kernel will work.
Click to expand...
Click to collapse
Dont install . rj's kernel is for only INTL devices . Sorry i think your device is INTL and replied.
could you make a port for the 4 inch sgp?
I have the same problem as tsg2513, it sits at the Samsung logo and does nothing. I have a USA SGP5.0 and I flashed entropy's kernel right before I flashed the MIUI.
mrjaredbeta said:
I have the same problem as tsg2513, it sits at the Samsung logo and does nothing. I have a USA SGP5.0 and I flashed entropy's kernel right before I flashed the MIUI.
Click to expand...
Click to collapse
figured it out. i have a USA device as well and had the same issue. It was also strange as to why the flashing process only took like 5 seconds....
i flashed rj's kernel (so my buttons stopped working) then i restarted recovery just so the changes get applied. then i proceeded to flash miui. just make sure in the install options you selection USA keyboard patch and the install process should take much longer (that means its working) and bam.
EDIT: ok so the buttons light up but they still don't work. after booting to miui and sat at the homescreen for a minute or two, reboot and flash entropy's kernel.
raishiro said:
figured it out. i have a USA device as well and had the same issue. It was also strange as to why the flashing process only took like 5 seconds....
i flashed rj's kernel (so my buttons stopped working) then i restarted recovery just so the changes get applied. then i proceeded to flash miui. just make sure in the install options you selection USA keyboard patch and the install process should take much longer (that means its working) and bam.
EDIT: ok so the buttons light up but they still don't work. after booting to miui and sat at the homescreen for a minute or two, reboot and flash entropy's kernel.
Click to expand...
Click to collapse
Are you saying that after you re-flashed entropy's kernel the buttons work? Also, have you checked to see if the GPS works?
i flashed entropy's kernel after miui successfully boot up in order to get my buttons to work again, so yes
raishiro said:
i flashed entropy's kernel after miui successfully boot up in order to get my buttons to work again, so yes
Click to expand...
Click to collapse
Great! Can you please check if GPS works?
Google Maps works, just cant get a lock on Navigation. also, just discovered that the launcher restarts whenever you try to turn on usb storage with your cable plugged in...preventing you from accessing your files on your computer
raishiro said:
Google Maps works, just cant get a lock on Navigation. also, just discovered that the launcher restarts whenever you try to turn on usb storage with your cable plugged in...preventing you from accessing your files on your computer
Click to expand...
Click to collapse
Yeah, I just flashed it a little while ago. Everything looks really good expect for a few small problems (as you mention) which I can live with but I really need the GPS to work to consider this my dailer driver. Here's to hoping someone can get it fixed.
tsg2513 said:
Yeah, I just flashed it a little while ago. Everything looks really good expect for a few small problems (as you mention) which I can live with but I really need the GPS to work to consider this my dailer driver. Here's to hoping someone can get it fixed.
Click to expand...
Click to collapse
Anyone know how to get the GPS working?
So after a couple of hours searching the web, it may be that the GPS problem is inherent in MIUI 2.3.

[Q] Baseband Unknown/IMEI etc dissapears after reboot.

Hi,
Whenever i turn my phone off and back on again it fails to recognise my baseband or IMEI. I have seen other threads on this forum relating to this but not specifically after a reboot.
If the phone stays on there seems to be no problem and when I rebooted in my flat last night (where I have strongish signal) it doesn't seem to be a problem (though i would need to check this again).
So far my fixes is, and this works everytime:
- Reboot recovery,
- Flash rom/kernel (cmexperimental)
- wipe dalvik
- wipe cache
- reboot.
This is not really feasible long term as it is a battery drain and not how a phone should be! I do have a EFS backup apparently though i did not do this back up intentionally. It is dated the 18th September of this year, i've heard Siyah back ups efs automatically so worse case i should have that there but i know that it's not ideal to mess around with EFS.
Can anybody help me? I can supply further information.
This problem started earlier this week after i flashed PA 2.54 and then restored a nandroid back up of the changmin rom.
I would really appreciate any help. if i've missed anything out i apologise.
Thanks
I have a similar problem and Apparantly you need to restore a backed up efs to fix it there is this app it hasnt worked for me though.
https://play.google.com/store/apps/details?id=com.helroz.GSII_Repair
1Chef said:
I have a similar problem and Apparantly you need to restore a backed up efs to fix it there is this app it hasnt worked for me though.
Click to expand...
Click to collapse
can i ask what you did to cause the issue in the first place? any idea?
Im using neat rom (http://forum.xda-developers.com/showthread.php?t=1569686) and I flashed an aroma mod to add more options to it, I then rebooted and I had no signal, imei no anything and this message kept appearing (see pic)
The way I fixed it was to just reflash the rom and it removed the aroma mods, I decided today to just keep the standard rom with no mods and its looking good as ive rebooted 4 times so far and nothings happen except on one reboot i lost 62% wtf. The dev of the rom (salesale) pm'd me and explained how to fix it by editing your efs backup and then placing it back and using command lines to replace the old one, this didnt work for me though.
1Chef said:
Im using neat rom (http://forum.xda-developers.com/showthread.php?t=1569686) and I flashed an aroma mod to add more options to it, I then rebooted and I had no signal, imei no anything and this message kept appearing (see pic)
The way I fixed it was to just reflash the rom and it removed the aroma mods, I decided today to just keep the standard rom with no mods and its looking good as ive rebooted 4 times so far and nothings happen except on one reboot i lost 62% wtf
Click to expand...
Click to collapse
yeh i'm going to try factory reset and a fresh rom install to see if that fixes the problem. nice to hear there is hope and all the time it is working it's not so bad! just have to cut down on the amount of flashing i do!!
Is that neat rom ICS or JB? i really don't want to go back from JB to ICS!
Jelly bean of course its nice and stable, and you can't hide it, if your a flashaholic your gonna flash wow wtf your post was apparantly sent from 01/01/1970
Ok I've done a clean install of neat rom and installed the aroma mods. This has once again deleted all of the IMEI and other data like that, after lots of googling and using the repy from neat roms developer (salesale) I managed to do the steps he posted I also found this forum which outlines the steps of what to do, you will need to do the command lines in recovery, to unmount the efs so youll need this ( I think you should have this anyway as its great) I unfortunately couldn't do this as I get stuck on the last command line with: tar: invalid tar magic I have retreated back to just standard neat rom which for some reason unknown to me will not delete my IMEI but will do so upon the next reboot with aroma mods flashed WTF .

[ROM][CM12][5.0.2][20150602][SaberMod] CM12+ Unofficial Build *** SUPER FAST ***

Welcome to wilson3q's CM12 Unoffical Build!
As requested by some users, I started to build cm12 for I605. I don't own a I605, please help to test. If you like my work, you can donate here.
Disclaimer: I take no responsibility for bad things that happen as a result of flashing this.
My kernel source is standard cm12 kernel without any modifications.
SaberMod tool chain source is HERE.
All the rests are pretty standard cm12 stuffs, except a few patches I applied on top of them.
[Download]
ROM (please don't mirror):
build - 20150513
build - 20150602
Gapp:
http://forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330
Recommended launcher:
Nova Launcher (really like its JB zoom app animation, hate L slide up animation)
Recommended theme:
Deep Darkness
If you need enable soft buttons, flash this: View attachment softkeys.zip or soft+hardkeys.zip
[Flashing Guide]
1. Reboot to CWM/TWRP recovery
2. Flash ROM zip file
3. Flash Gapps
4. Reboot
* Wipe data first if you come from another rom *
* Newer boot loader, modem and recovery is highly recommended (don't use twrp 2.8.4, use 2.8.1 instead) *
* No other kernel will be supported, use the stock one, for your best experiences too *
[Patches]
My additional patches over cm12 includes:
Enhancements and bug fixes cherry-picked from other ROMs, including Slim LP, Nameless
SaberMod for ROM and kernel
O3, JustArchi optimization
Pthread enabled & strict aliasing
Latest sqlite db library
Added Boeffla sound engine 1.67
Added CPU governor zzmoove, smartassv2, savagedzen
Added io scheduler row, bfq, zen, vr
Disabled some useless Samsung processes
Fixed GPS
Fixed low in call volume
Video playback forward/backward fix
Removed all kernel debuging stuffs
Fixed keyboard not showing up during setup wizard
Fixed a crash of music app
Changed DPI to 280
Fixed Camera issue
Fixed Day Dream
Fixed Netflix streaming (one more reboot needed after installation of Netflix)
Enabled Multi-user
LMK minfree tweaks
Misc tweaks
more...
For better experience, change Nova animation/scroll speed to Fast...
[Known Bugs]
I am not sure what issues you will get, but one thing is for sure: YOUR PHONE WILL FLY!
chrome glitch: type chrome://flags as URL and disable GPU thank @bigmarv31)
Thank cm team for the amazing ROM.
Thank sabermod for the amazing toolchain.
Special thanks to: @DerTeufel1980, @sbrissen, @rogersb11, @TheBr0ken, @DreamFX, @frankie...
[Screenshots]
Always nice to see a new thread for i605. This doesn't happen often. Thank you!
Thanks again for building this for us we all appreciate it!
will be testing this out and see how it spars. thanks for this! I was going to try and "port" it over from the t0lte with replacing some libs and such, lol.
Thank you! I'm downloading right now. Looking like a slow day at work, so why not?
Downloaded files. Backed everything up. Rebooted to recovery. Wiped / Factory Reset using TWRP. Installed both zips sequentially. Apprehensive when I rebooted. Took a couple of minutes of sweating watching the CM Logo swirl around, and then bam! I'm up and running Lollipop. I'll update soon...
UPDATE
thefinancemaster said:
Downloaded files. Backed everything up. Rebooted to recovery. Wiped / Factory Reset using TWRP. Installed both zips sequentially. Apprehensive when I rebooted. Took a couple of minutes of sweating watching the CM Logo swirl around, and then bam! I'm up and running Lollipop. I'll update soon...
Click to expand...
Click to collapse
So, I've got it up and running. It's fast and smooth, but there's a couple of glaring issues stopping me from testing any farther. The first screen that comes up after you initially select your language, is a new (to me) "Activating Cellular Service" screen. It has a message on the screen saying this "can take up to 5 minutes". I let it go for longer than that, but I got an error that it was unable to activate and I was able to try again, or skip it. I'll skip it for now just to see how the rest of the ROM works. Next screen is Wifi login, works fine., but you still have to hit "skip" even after you sign in to wifi.
Then it checks connections, for updates, etc and I keep getting the error that google play services has stopped. I haven't even logged into it yet...
Next screen is Tap N Go. Option to transfer all of your stuff off your old phone using NFC. Great idea, but I'm not testing because my new phone IS my old phone.
Then, it's google login time. Worked fine, standard stuff we're used to with options to download/backup your apps using google. It takes a minute here, and I kept getting popups about all of the google apps stopping, each individually. Annoying a bit... I hit the "RESTORE" option, this is my second try, and the first time I didn't have Root, so I couldn't download Titanium to restore everything. I also skipped the google restore last time, so I tried it this time. This is a new screen for me, but it takes me to a "Restoring" screen for a bit. It's not as annoying as on previous Android versions, having to individually approve each app that was updating/downloading. I keep getting the popups about one Google app or another stopping.
I get past the restore page, and the phone locks up. Reboot... After reboot, I have to go into the play store to download Titanium. It seems quite a few apps were restored by Google, but not all. I looked at the "My Apps" section of the play store, and there's a ton of apps cued up to download. It's what I was trying to avoid... So I hit "Stop" at the top, and it stops them all.
**I mentioned earlier that this is my 2nd try, the first try was about the same, but I didn't have root access. I downloaded SuperSU, but it wouldn't update the binaries, so it was useless. I tried SuperUser, it didn't work either. So, I rebooted to recovery, wiped, flashed the ROM, GApps, and the SuperSU zip I had saved on my SD card from my previous Omni Rom. Then I rebooted and now you can read what happened.
At this point, I'm having problems downloading Titanium Backup, SuperSU, or anything I really want. The Play Store is hanging and force closing. I can't even open the SuperSU I flashed from TWRP. There must be compatibility issues. I read somewhere that Lollipop has issues with root somehow, but I'm not sure. On my first try, I was able to download Titanium Backup no problem, but it wouldn't work because I didn't have root access. SuperSU and SuperUser didn't help after downloading. CM has always been pre-rooted on all of the other devices I've installed it on.
For now, I'm just going to restore my backup of Omni Rom and be content with 4.4.4 for now.
I'll try again if anyone can help with actually being on the VZW Network and Root. I didn't get a chance to play with the other stuff in Lollipop yet, but I would love to.
thefinancemaster said:
So, I've got it up and running. It's fast and smooth, but there's a couple of glaring issues stopping me from testing any farther. The first screen that comes up after you initially select your language, is a new (to me) "Activating Cellular Service" screen. It has a message on the screen saying this "can take up to 5 minutes". I let it go for longer than that, but I got an error that it was unable to activate and I was able to try again, or skip it. I'll skip it for now just to see how the rest of the ROM works. Next screen is Wifi login, works fine., but you still have to hit "skip" even after you sign in to wifi.
Then it checks connections, for updates, etc and I keep getting the error that google play services has stopped. I haven't even logged into it yet...
Next screen is Tap N Go. Option to transfer all of your stuff off your old phone using NFC. Great idea, but I'm not testing because my new phone IS my old phone.
Then, it's google login time. Worked fine, standard stuff we're used to with options to download/backup your apps using google. It takes a minute here, and I kept getting popups about all of the google apps stopping, each individually. Annoying a bit... I hit the "RESTORE" option, this is my second try, and the first time I didn't have Root, so I couldn't download Titanium to restore everything. I also skipped the google restore last time, so I tried it this time. This is a new screen for me, but it takes me to a "Restoring" screen for a bit. It's not as annoying as on previous Android versions, having to individually approve each app that was updating/downloading. I keep getting the popups about one Google app or another stopping.
I get past the restore page, and the phone locks up. Reboot... After reboot, I have to go into the play store to download Titanium. It seems quite a few apps were restored by Google, but not all. I looked at the "My Apps" section of the play store, and there's a ton of apps cued up to download. It's what I was trying to avoid... So I hit "Stop" at the top, and it stops them all.
**I mentioned earlier that this is my 2nd try, the first try was about the same, but I didn't have root access. I downloaded SuperSU, but it wouldn't update the binaries, so it was useless. I tried SuperUser, it didn't work either. So, I rebooted to recovery, wiped, flashed the ROM, GApps, and the SuperSU zip I had saved on my SD card from my previous Omni Rom. Then I rebooted and now you can read what happened.
At this point, I'm having problems downloading Titanium Backup, SuperSU, or anything I really want. The Play Store is hanging and force closing. I can't even open the SuperSU I flashed from TWRP. There must be compatibility issues. I read somewhere that Lollipop has issues with root somehow, but I'm not sure. On my first try, I was able to download Titanium Backup no problem, but it wouldn't work because I didn't have root access. SuperSU and SuperUser didn't help after downloading. CM has always been pre-rooted on all of the other devices I've installed it on.
For now, I'm just going to restore my backup of Omni Rom and be content with 4.4.4 for now.
I'll try again if anyone can help with actually being on the VZW Network and Root. I didn't get a chance to play with the other stuff in Lollipop yet, but I would love to.
Click to expand...
Click to collapse
Did you flash the andriod 5 gapps? Do a full wipe?
You also need latest twrp recovery or philz touch recovery...
baseband unknown no data
bigmarv31 said:
baseband unknown no data
Click to expand...
Click to collapse
Will fix this today.
Keep a close look.
wilson3q said:
Will fix this today.
Keep a close look.
Click to expand...
Click to collapse
Yes Sir Thanks
New build online...
Giving this a try!! Downloading now
Update- Downloaded and installed without any problems. I did have to skip the network verification set-up as it never went anywhere and wifi set-up worked as with setting up my g-mail account,.
Everything seems good except for no service, baseband version still unknown and no service or apn's for data.
going back to Liquid till this gets updated.
LvnInOC said:
Giving this a try!! Downloading now
Update- Downloaded and installed without any problems. I did have to skip the network verification set-up as it never went anywhere and wifi set-up worked as with setting up my g-mail account,.
Everything seems good except for no service, baseband version still unknown and no service or apn's for data.
going back to Liquid till this gets updated.
Click to expand...
Click to collapse
Can you get a logcat?
I guess my proprietary blobs are not correct...
wilson3q said:
Can you get a logcat?
I guess my proprietary blobs are not correct...
Click to expand...
Click to collapse
I already went back to Liquid but I dont mind doing another try at it especially if it would benefit. let me get ir flashed and try to get you the Logcat
. give me a few
---------- Post added at 05:38 AM ---------- Previous post was at 05:10 AM ----------
ok so I got this flashed again strange this time after booting it said no sim card inserted and to insert my sim, it was not out and i skipped and moved to wifi , setup worked all the way and I got a log cat, hope I did it correct as this is new to me. I have to re-flash to Liquid for now so that I have a working phone as I go to work in an hour,
Again let me know if you need any more details
Same on this build baseband unknown so no data
wilson3q said:
Did you flash the andriod 5 gapps? Do a full wipe?
You also need latest twrp recovery or philz touch recovery...
Click to expand...
Click to collapse
Yes, I flashed the gapps from your post. gapps-lp-20141109 is what the file name was. I use TWRP, not sure if it's the latest but it works fine. I always do the "factory reset" wipe option in twrp, because I believe that's a full wipe with one swipe... Now, just to test it out and see if I was doing something wrong, I tried the Liquid Smooth build (latest nightly) from 1/7, and it loaded and booted just fine. Had to flash the ROM, Gapps, GPS Fix, and Super SU (so I can restore my apps in Titanium). It connected to data, and ran me through the setup in a flash. It's working well enough to be a daily driver. Do you have any other suggestions? I'm willing to help if you want me to try something else.
Going to give this a try. Thank you for giving this phone options. It is greatly appreciated.
"Chance Favors the Prepared"
glockman4519 said:
Going to give this a try. Thank you for giving this phone options. It is greatly appreciated.
"Chance Favors the Prepared"
Click to expand...
Click to collapse
You're like me you change roms by the hour.
DreamFX said:
You're like me you change roms by the hour.
Click to expand...
Click to collapse
I love to flash and then go through a process of testing. I actually got 2 gt-n5110s so I could test a couple builds at same time, kind of a back to back comparison.
I would love to pick up another i650 that still has unlocked bootloader for testing that way on this device as well.
Well back to this rom, I couldn't get past the getting data screen and had to abort. I did a clean flash and wiped everything with both philz and TWRP 2.8.3.0. I tried both stock and shift kernels.
Lets face it, I'm a flashaholic. lol.....
"Chances Favors the Prepared"

[ROM|ROOT|Stockish|NO KNOX|No ItsOn] 9/5/15 TouchWiz Lollipop 5.1.1 (N915PVPU4COG1)

Here's a Stockish ROM for your N915P. This ROM has Knox, Sprint ItsOn, and secure storage removed. Nothing else was done to this ROM. I'm new to the Note Edge so I may upload patches to remove any other traces of Knox or ItsOn or optimizations I happen to find while making my own ROM.
Prereq: OG1 Baseband. Download it below.
Modified stock kernel (BeastMode Stock): Kernel modified to allow root by disabling "Root Restriction in defconfig"
Download
MD5: 75bd507e3b4296a128f1c0c48fd2359c
Version 1.1: Enabled many TCP Congestion options via defconfig. Added init.d ability via ramdisk.
Odex:
Download
MD5: 59d544ef6a4bc12d969f4efd9577d36d
DeOdex DEBLOATED:
Download
MD5: 00b5246b9c2074e7ff04f6af2bad1ec2
OG1 Baseband:
Download
MD5: 3bc88209d60117fb573e0f5a2e50f4e9
Patches and fixes:
None yet.
[size=+3]DeOdex note:[/size]
The first boot time for this DeOdex ROM is very long. Approximately 5-8 minutes. Your phone will get hot as the splash screen remains on the yellow Sprint boot animation. I recommend keeping your phone in a cool environment while this is happening. The heat, if not properly checked, can make boot times even longer as the system throttles speed in order to deal with the heat. This doesn't happen on the Odex version.
[size=+3]Install instructions:[/size]
-Are you currently on the OC8 bootloader and would like to stay on it?
--Simply flash the baseband with Odin, and the ROM.
-Are you on the update from OTA or flashed the OG1 TAR?
--Flash kernel only.
-Are you one of the unlucky ones to take the OTA and hose your system trying to root and are now on another ROM?
--Flash ROM only.
-Are you on any build after OC8 but not the current OG1?
--Flash the baseband and ROM. Bootloader is optional and not available in this thread as of yet.
Wiping is only necessary if you are coming from a different base, such as AOSP/CM. If you are coming from a touchwiz ROM, wiping isn't needed, but won't hurt.
Changelog:
9/5/15: Initial Release.
Kernel source code: Download
Thanks, will flash tomorrow.
Thank you so much freeza!! Patiently waiting for the deodexed version and for the baseband.
Added modified stock kernel v1.1 and baseband.
Freeza if I'm on 5.0.1 still just flashing the baseband may give me better service ? Technically...
Downloading now still waiting on the deodex will play with the stock to see how it is thanks
Ok, flashed rom, kernel, and modem. Took a while to boot but all is running well at the moment. Thanks for supporting our device!!
DeOdex uploading....
What What!!! By far the best developer on a Samsung!! Thank you so much for your hard work brother!! Real Talk, i still have your rom on my Note 3! It runs flawlessly!! XD
Get your DeOdex on, guys! ;D
Thanks so much for this!!! I love the separate edge screen and have no reason to "upgrade" to the Note 5
Thank you freeza NICE WORK WITH THE KERNEL
When I saw you had been requested to come help this phone achieve root I knew great things were going to come to those who waited. I've had other devices where you were there to help gain root and again you came through. I purposely didn't take the OG1 update because I knew in time this device wasn't going to be ignored. IMO it is the best NOTE device out there and it will be mine until they make a NOTE EDGE 2 (With SD card and removable battery). Thank you for the quick response and the hard work you do to make this happen.
Cant get either one of them to boot. Both the odex and the deodex wont boot, they both flash fine and then after the phone reboots it stays on the yellow sprint screen Maybe for up to a minute then reboots and it cycles that way. Never boots. I've tried not wiping/Factory restarting as well as wiping/Factory resetting. Have also tried formatting through TWRP to no avail. Have also tried flashing the kernel and wiping caches after flashing but Nothing is working. Have also flashed the baseband.
Im currently on OF6 if that should matter.
Edit: md5 Sums have also match up. Have downloaded both from my phone and a pc to no avail.
Edit 2: tried both TWRP 2.8.6.0 and 2.8.7.0. Also tried clockworkmod recovery and that didn't work either.
I had success but it took some time. I downloaded the deodexed debloated rom, the kernel, and the baseband. I had a method to how I wanted to do this and here is how i got there.
I was running OC8 rom rooted.
1. I odened the baseband tar file and rebooted. But unfortunately it bootlooped on the initial splash screen (note edge) so
2. I ran TWRP recovery and installed the kernel file. Rebooted phone and it ran fine. I looked at the settings about phone and saw that the baseband and the rom all said OG1 but i had not installed the rom yet. So i figure it was a trick to get the baseband to install. So
3. I went back into recovery. Wiped dalvik cache and regular cache and installed the new rom. It installed fine and i waited the length of time for the initial boot up. But this time as it was "Android is starting" it rebooted and got stuck on the sprint splash screen and kept randomally vibrating. Having the ability to remove the battery
4. Rebooted back into recovery, wiped everything including internal storage, and reinstalled the deodexed rom. It installed fine and went to the initial startup screen where it tries to initialize and it rebooted one time, back to the initialize screen but continued without a hitch.
I currently am running OG1 5.1.1. With root.
At times during setting up the phone it would randomally vibrate for no reason...short bursts...but it hasn't yet again rebooted, restarted, or crashed. It is faster from what i see. Probably because there are almost no google apps installed. I've had to install chrome, youtube, and maps. But all seems fine. My signal and speeds are the same so the baseband didn't do much to change that. But so far so good.
---------- Post added at 11:30 AM ---------- Previous post was at 11:27 AM ----------
I did try to install over my odexed OC8 with this new rom but because there is so much different about the files that are installed IMO formatting the phone was the only way to get this to work.
---------- Post added at 12:16 PM ---------- Previous post was at 11:30 AM ----------
One final thing just in case it isn't known: when you wipe everything in TWRP, excluding external storage, you have to restart the recovery before trying to install a rom. It will say you have no OS installed, but you are restarting the recovery not booting a rom, so that's fine, but you do lose root status when wiping. So the next screen gives you the ability to gain root again, but you have to restart TWRP to do that. In the past i tried to figure out why installing after wiping didn't work, and 99% of the time it was because of that. I also don't like installing new roms over older roms (even if they are the same base (touchwiz to touchwiz)) because i feel I would spend more time troubleshooting why something isn't working instead of just starting over. I find less hassle doing it this way.
I odin baseband .tar file, than reboot it to recovery, and flash kernal and odex room at the same time, saw some red messages when kernel was flashing, than odex rom was next but it was successful when it was done. (I did not know if kernel falsh ok so i reflash kernel again) reboot to system and after the android system updated all its ok. No problems so far.
Oh and i inclided the supersu at the same time i flash kernel, odex rom and supersu.
1. Odin baseband tar file.
2. Flash kernel, odex rom and supersu.
3. Re-flash kernel.
4. Reboot to system and profit.
(Maybe i did un necessary steps, but its working. )
Was running great but have been experiencing Google account and store issues. Tried odex and deodex versions with similar results. Anyone else having issues?
Johnny Halo III said:
Was running great but have been experiencing Google account and store issues. Tried odex and deodex versions with similar results. Anyone else having issues?
Click to expand...
Click to collapse
Just starting to have random freezing. And not able to select my apps froms the edge screen, i can only scroll through it. Will remove all the app shorcuts and re-add tham again.
**update 1.
I removed all shorcuts from the edge screen and added them back, all work but some i have to select them a few times before they open.
Maybe i have to reflash, reset, clean and wipe.
**update 2.
Clean install of odex rom, and kernal 1.1.
No more lagg but the edge screen does not work properly. Not able to select and open some of the favorite app shorcuts.
**update 3.
Factory reset, cleaned and wype, odin sprint lollipop update (uf something), downloaded OG1 update. Installed all apps from scratch. And the edge screen does not work. I can scroll, side to side, up and down, but when i select an app it does not open it.
** update (last one)
Foud the code to test the phone hardware.
*#0*# on dial screen. Tested all and it came out good. But i notice that some how the edge screen its not as whide as it used to be ( like its more to the right of the phone) so where i use to touch to select an app its now more to the right emd of the edge, thats why i was able to scroll but not select the app.
Its all good now. Now second round of flashing.
Will give it another try at the room.
Thanks Freeza and sorry about the problems i had and hopefully did not cause anyone from not trying this great work pr yours.
I left all the problems i had so tje next person trying this room does not get discureged from trying. But allways fallow direction.
:thumbup:
** last update
After setting and resetting, flashing and un-flashing, rooting and un-rooting. I can finally wrote that all is good. Running latest lollipop 5.1.1 and freeza's new 1.1 kernel, I can reprt that all is smooth as butter.
Thanks for the hard work.
Thank you so much for your hard work Freeza! So glad I'm finally running 5.1.1 on this beast :]
The ROM is working pretty well, but I have noticed that every now and then, the phone will be rather laggy. Turning the screen off and on again seems to fix the issue, making me think that the processor is being throttled while the screen is off (good) but isn't being sped back up when the screen is turned on..sometimes.
It's not a huge deal, but I was wondering if anyone was experiencing the same thing.
No issues here.
Starting on OG1 had to flash bootloader, kernel, deodex rom and supersu to make it stick. Two days now and battery, signal and speed seem improved.
Thanks freeza!

Possibily well-explained way to get Marshmallow working...

Marshmallow for this device, keeps crashing as it is (com.android.phone, RIL). Getting the problem solved is easy, @puntoazul already written something like that, but I managed to get everything that has to be flashed in a single post.
Flash these files, in the next order, from top to bottom:
- A-GAPPS_6.0.1_09022016.zip - https://mega.nz/#!M99xiQbZ!fcclA9QDSXxxizsifu21MUbgMGsyRsNCCHPO4KrF5xQ (thanks to @puntoazul for packing it)
- APNFixer4CM13.zip - http://forum.xda-developers.com/attachment.php?attachmentid=3689957&d=1458482477 (thanks to @puntoazul for packing it)
- UNIVERSAL NFC DESTROYER - http://forum.xda-developers.com/attachment.php?attachmentid=3280610&d=1429942749 (thanks to @-CALIBAN666- for developing it), yeah, it's made for lollipop but works perfectly.
- Media.zip (codecs pack) http://forum.xda-developers.com/attachment.php?attachmentid=3680746&d=1457817927 (thanks to @EdwinMoq for packing it.)
When you're done, do a factory reset and reboot your device. Then, enjoy Marshmallow .
EDIT: Media.zip seems to be a mistyped step, I haven't found it and it wasn't needed to get a successful startup on my device.
EDIT: It seems like it's needed, anyways, I haven't found it, waiting for @EdwinMoq to answer.
EDIT: Added Media.zip, found at http://forum.xda-developers.com/opt...ogenmod-13-t3303671/post65803228#post65803228 ( @EdwinMoq 's post).
facuarmo said:
Marshmallow for this device, keeps crashing as it is (com.android.phone, RIL). Getting the problem solved is easy, @puntoazul already written something like that, but I managed to get everything that has to be flashed in a single post.
Flash these files, in the next order, from top to bottom:
- A-GAPPS_6.0.1_09022016.zip - https://mega.nz/#!M99xiQbZ!fcclA9QDSXxxizsifu21MUbgMGsyRsNCCHPO4KrF5xQ (thanks to @puntoazul for packing it)
- APNFixer4CM13.zip - http://forum.xda-developers.com/attachment.php?attachmentid=3689957&d=1458482477 (thanks to @puntoazul for packing it)
- UNIVERSAL NFC DESTROYER - http://forum.xda-developers.com/attachment.php?attachmentid=3280610&d=1429942749 (thanks to @-CALIBAN666- for developing it), yeah, it's made for lollipop but works perfectly.
- Media.zip (codecs pack) http://forum.xda-developers.com/attachment.php?attachmentid=3680746&d=1457817927 (thanks to @EdwinMoq for packing it.)
When you're done, do a factory reset and reboot your device. Then, enjoy Marshmallow .
EDIT: Media.zip seems to be a mistyped step, I haven't found it and it wasn't needed to get a successful startup on my device.
EDIT: It seems like it's needed, anyways, I haven't found it, waiting for @EdwinMoq to answer.
EDIT: Added Media.zip, found at http://forum.xda-developers.com/opt...ogenmod-13-t3303671/post65803228#post65803228 ( @EdwinMoq 's post).
Click to expand...
Click to collapse
Ive been experiencing the same problems you have, but i found my own alternate way. Since this phone isnt my daily driver, i used lucky patcher to remove the phone services app aka com.android.phone from the system.Everything is fixed, all stabilized and smooth. I still get crashing from phone and messaging storage,but no lag or stability issues. But ill try this anyway to try to completely remedy the crashing
As only two entries for Orange seem to be missing in the APN database: Does everyone need that fix because the APN list is totally corrupted by this, or only certain Orange customers?
Elite.101 said:
Ive been experiencing the same problems you have, but i found my own alternate way. Since this phone isnt my daily driver, i used lucky patcher to remove the phone services app aka com.android.phone from the system.Everything is fixed, all stabilized and smooth. I still get crashing from phone and messaging storage,but no lag or stability issues. But ill try this anyway to try to completely remedy the crashing
Click to expand...
Click to collapse
Okay, please let me know what happened when you're done.
lecorbusier said:
As only two entries for Orange seem to be missing in the APN database: Does everyone need that fix because the APN list is totally corrupted by this, or only certain Orange customers?
Click to expand...
Click to collapse
For a better stability, you must flash it. For example, running this ROM without this patch, the RIL keeps crashing, taking in mind that Movistar and Tuenti (a lesser know Argentina provider, a recently started provider), are not being detected.
I'll wait for the next build. Then probably use it as a Wireless AP, as there are huge problems resulting from the small data partition and Ram. I still hope that MMs z-buffer feature provides some solution. This whole mess started about half a year ago and getting worse, on the L9 and a similarly featured tablet with CM11, so it's not the rom's fault. The tablet has plenty of space on the data partition, however, but ram and SoC face similar problems.
My current wireless AP is an Iphone 4s with only 0,5GB Ram. And it's is still working reliably, no apps freezing and fcing, and I can access websites which will make Firefox on the L9 and said tablet quit every time.
All the affected apps seem to deal with HTML code and are supposed to use the system webview engine. Updating the Google webview engine is possible with CM12.1 and 13, but to no avail, only taking space on the data partition.
facuarmo said:
Okay, please let me know what happened when you're done.
Click to expand...
Click to collapse
Well. I tried it. No crashing at all with A-Gapps or Gapps mini
But I kept getting kernel panics,even while charging.So I reverted to my system modified nandroid backup in which I uninstalled Phone services aka com.Android. phone and disabled Phone and messaging storage app.
Elite.101 said:
Well. I tried it. No crashing at all with A-Gapps or Gapps mini
But I kept getting kernel panics,even while charging.So I reverted to my system modified nandroid backup in which I uninstalled Phone services aka com.Android. phone and disabled Phone and messaging storage app.
Click to expand...
Click to collapse
Follow this http://forum.xda-developers.com/showpost.php?p=65892603&postcount=395
As i have previously explained in original thread all of these files in a single go. with order defined
1) Goto TWRP recovery can also use new TWRP 3.0.2.0 (i have already installed marshmallow without any errors)
2) Wipe system, Cache and Davic
3) Flash rom
4) Flash Media.zip
5) Flash A-GAPPS_6.0.1_09022016.zip
6) Flash APNFixer4CM13.zip
7) If you have a p768 flash campatch
Also flashed NFC Destroyer so that on booting for the first time... i did'n encountered any error at all.. i have been using this ROM as my daily driver and never encountered any kernel panic or ant other error also i didn't faced any rotation problem. its working fine as it should be. Only thing i am concerned about is battery, it drains very fast, tweaking with kernel auditor didn't help me either. other then this i haven't faced any problem, everything is working fine, i'm able to install Xposed framework without any problem.. Great work......
I have also tried this with New TWRP Recovery.... worked like a charm
Elite.101 said:
Well. I tried it. No crashing at all with A-Gapps or Gapps mini
But I kept getting kernel panics,even while charging.So I reverted to my system modified nandroid backup in which I uninstalled Phone services aka com.Android. phone and disabled Phone and messaging storage app.
Click to expand...
Click to collapse
Can you tell me your real phone model? There're some hard incompatibilities between the P760 and the P769.
Codeplex said:
Follow this http://forum.xda-developers.com/showpost.php?p=65892603&postcount=395
As i have previously explained in original thread all of these files in a single go. with order defined
1) Goto TWRP recovery can also use new TWRP 3.0.2.0 (i have already installed marshmallow without any errors)
2) Wipe system, Cache and Davic
3) Flash rom
4) Flash Media.zip
5) Flash A-GAPPS_6.0.1_09022016.zip
6) Flash APNFixer4CM13.zip
7) If you have a p768 flash campatch
Also flashed NFC Destroyer so that on booting for the first time... i did'n encountered any error at all.. i have been using this ROM as my daily driver and never encountered any kernel panic or ant other error also i didn't faced any rotation problem. its working fine as it should be. Only thing i am concerned about is battery, it drains very fast, tweaking with kernel auditor didn't help me either. other then this i haven't faced any problem, everything is working fine, i'm able to install Xposed framework without any problem.. Great work......
I have also tried this with New TWRP Recovery.... worked like a charm
Click to expand...
Click to collapse
Well, ill try this.The way i tried this was in a different order, but pretty much i have the phone under control since i uninstalled com.android.phone aka Phone Services and disabled Phone and messaging storage.
but i guess ill try this.i need the exact correct order with NFC Destroyer in the list in order of flashing.
---------- Post added at 01:31 PM ---------- Previous post was at 01:30 PM ----------
facuarmo said:
Can you tell me your real phone model? There're some hard incompatibilities between the P760 and the P769.
Click to expand...
Click to collapse
I currently Have the LG-P769. T-Mobile variant
Elite.101 said:
Well. I tried it. No crashing at all with A-Gapps or Gapps mini
But I kept getting kernel panics,even while charging.So I reverted to my system modified nandroid backup in which I uninstalled Phone services aka com.Android. phone and disabled Phone and messaging storage app.
Click to expand...
Click to collapse
Flash in this order (works for me every time)
1) Goto TWRP recovery can also use new TWRP 3.0.2.0 (i have already installed marshmallow without any errors)
2) Wipe system, Cache and Davic
3) Flash rom
4) Flash Media.zip
5) Flash A-GAPPS_6.0.1_09022016.zip
6) Flash APNFixer4CM13.zip
7) NFC Destroyer
and reboot..
Codeplex said:
Flash in this order (works for me every time)
1) Goto TWRP recovery can also use new TWRP 3.0.2.0 (i have already installed marshmallow without any errors)
2) Wipe system, Cache and Davic
3) Flash rom
4) Flash Media.zip
5) Flash A-GAPPS_6.0.1_09022016.zip
6) Flash APNFixer4CM13.zip
7) NFC Destroyer
and reboot..
Click to expand...
Click to collapse
Alright. Ill try this right now.Ima do a backup first.
Codeplex said:
Flash in this order (works for me every time)
1) Goto TWRP recovery can also use new TWRP 3.0.2.0 (i have already installed marshmallow without any errors)
2) Wipe system, Cache and Davic
3) Flash rom
4) Flash Media.zip
5) Flash A-GAPPS_6.0.1_09022016.zip
6) Flash APNFixer4CM13.zip
7) NFC Destroyer
and reboot..
Click to expand...
Click to collapse
im still having problems. i just finished setting up and now i have a kernel panic.......reverting now
Elite.101 said:
Well, ill try this.The way i tried this was in a different order, but pretty much i have the phone under control since i uninstalled com.android.phone aka Phone Services and disabled Phone and messaging storage.
but i guess ill try this.i need the exact correct order with NFC Destroyer in the list in order of flashing.
---------- Post added at 01:31 PM ---------- Previous post was at 01:30 PM ----------
I currently Have the LG-P769. T-Mobile variant
Click to expand...
Click to collapse
The kernel panics that you're experiencing, are also being faced by most of the people who has tried the P760 build in the P769, please check the ROM @EdwinMoq 's post and download the special build for this model, and try again. Then, please tell me how it goes.
facuarmo said:
The kernel panics that you're experiencing, are also being faced by most of the people who has tried the P760 build in the P769, please check the ROM @EdwinMoq 's post and download the special build for this model, and try again. Then, please tell me how it goes.
Click to expand...
Click to collapse
Well specifically, i used the p769 version. i tried apn fixer, nfc destroyer and media.zip, but the problem persisted. so i just reverted back to my nandroid backup in which i uninstalled com.android.phone aka phone services and disabled phone and messaging storage.I have it stable this way without kernel panics and using gapps mini since this isnt my daily driver. My galaxy core prime is SMG360T1.
Elite.101 said:
Well specifically, i used the p769 version. i tried apn fixer, nfc destroyer and media.zip, but the problem persisted. so i just reverted back to my nandroid backup in which i uninstalled com.android.phone aka phone services and disabled phone and messaging storage.I have it stable this way without kernel panics and using gapps mini since this isnt my daily driver. My galaxy core prime is SMG360T1.
Click to expand...
Click to collapse
Hmmm... Idk, sorry. That's what I've learned from here, not much atm haha.
facuarmo said:
Hmmm... Idk, sorry. That's what I've learned from here, not much atm haha.
Click to expand...
Click to collapse
True.one thing I want fixed is the headphones problem where sound goes to speaker
Elite.101 said:
True.one thing I want fixed is the headphones problem where sound goes to speaker
Click to expand...
Click to collapse
That's quite strange, seems like a bad kernel. For me, using the P760 (in the P778g, Argentina, LATAM) works fine, both speakers (front and rear) and headphones.
When the headphone amp starts to clip/overdrive, this is accompanied by an unplugging event for the headphones. Artas' CM11 and CM12.1 are affected, too, but I could get my P760 to work with decent and stable sound output. While in Rammar's PA sound volume was even lower than with the stock rom(too low for even bothering to take the headphones with me) , CM12.1 is loudest. In order to not accidentially trip clipping and unplugging events, which will also reset volume to safety level, requiring to turn it up and clip again etc etc, Ilimited max volume to 80% in the Headset Button Controller app,which allows to control volume via headset mic button.

Categories

Resources