Hi everybody,
today I'm going to teach you how to root Xperia E4g on newest firmware._________________________________________________
PROOF : http://postimg.org/image/mvua3tyyx/
0. Video tutorial (if you prefer it over textual)
1. Firmware DowngradeCheck your firmware version, if it is 25.0.A.2.14 you are going to have to downgrade it to x.x.x.1.28.
You are going to download Flashtool and download 1.28 firmware using XperiFirm that is build-in into flashtool and then you are going to flash it. If you need help here is Youtube Video :
2. Rooting
You are going to use iRoot to root your firmware. Do not update your firmware until I say to!
Link to iRoot : http://irootdownload.com/ ->download PC Version
3. Getting rid of Kinguser/Kingroot
Now go to Play Store and download app called Super-SuMe. Follow the instructions the app says and update SuperSu binaries if needed.
Reboot after that. Or since of August 2015 the app is paid and you can follow this video :
4. Preparing for software update
Now go to SuperSu->Settings and untick "Enable Superuser"
5. Update
Now is the time to update. Go to Sony Update Center app and download the update and wait for it to install.
There will be 2 available updates. When first is done dont enable Superuser, just install the second one and after that is done go to step 6
6. Getting root after update.
Once it is done, open SuperSu->Settings and tick Enable Superuser and reboot.
There you go. That's it.
Video on the way
Code:
Credits:
[user=6563093]@LeonXperiaXC[/user] for iRoot tutorial
iRoot devs
My trial and error
Hi thank you for the guide.
I have some problem after install super su. when I open it i receive the message to update binary.
But after i have choose normal mode tu update (i have no custom recovery) it fails.
Any suggestion about this?
Lucaciglione said:
Hi thank you for the guide.
I have some problem after install super su. when I open it i receive the message to update binary.
But after i have choose normal mode tu update (i have no custom recovery) it fails.
Any suggestion about this?
Click to expand...
Click to collapse
I had this exact same issue when rooting my wife's E3, yet the binaries updated fine on my E3! I never did manage to resolve the problem despite trying an array of suggestions courtesy of Google! Sorry I'm not really much help...!
I swapped my E3 for the E4g recently after it developed a microphone fault, and was about to try the OP's method to root it when I saw your post. I think I'll hang on a little while though to see how things go for you....
Have others had success with this method?
sidders2 said:
Have others had success with this method?
Click to expand...
Click to collapse
However method work. I have phone rooted and super su work.
Sony update work.
Only problem is that super su asks for an updated that always fails....
But all works...
Lucaciglione said:
Hi thank you for the guide.
I have some problem after install super su. when I open it i receive the message to update binary.
But after i have choose normal mode tu update (i have no custom recovery) it fails.
Any suggestion about this?
Click to expand...
Click to collapse
My SuperSu never asked for Binary update
But the binary update itself should have worked.
I think you could do a complete video guide with downgrading firmware and all the stuff... Because as I see from posts some people have problem with binary update. Also it would be a great guide to new comers. Thanks!
P.S. "Super-Sume" is only paid app now but the price is really ridiculously low. :>
I tried downgrading but it just keeps giving me the error "Processing of loader.sin finished with errors", please help!
MarKo9 said:
I think you could do a complete video guide with downgrading firmware and all the stuff... Because as I see from posts some people have problem with binary update. Also it would be a great guide to new comers. Thanks!
P.S. "Super-Sume" is only paid app now but the price is really ridiculously low. :>
Click to expand...
Click to collapse
I will do the video asap.
LukeyWolf said:
I tried downgrading but it just keeps giving me the error "Processing of loader.sin finished with errors", please help!
Click to expand...
Click to collapse
Try checking wipe data and cache while choosing the firmware or try other firmware.
I recommend Customized Europe 5 cause it doesn't give errors with SuperSu binaries
LukeyWolf said:
I tried downgrading but it just keeps giving me the error "Processing of loader.sin finished with errors", please help!
Click to expand...
Click to collapse
Did you download the latest version of FlahTool?
Sobotkama said:
Did you download the latest version of FlahTool?
Click to expand...
Click to collapse
Yes, 0.9.19.0
PFM said:
I will do the video asap.
Try checking wipe data and cache while choosing the firmware or try other firmware.
I recommend Customized Europe 5 cause it doesn't give errors with SuperSu binaries
Click to expand...
Click to collapse
Tried CE5 (Customized Europe 5) still gives the same error.
LukeyWolf said:
Tried CE5 (Customized Europe 5) still gives the same error.
Click to expand...
Click to collapse
Are you using newest Flashtool version?!
PFM said:
Are you using newest Flashtool version?!
Click to expand...
Click to collapse
Yes, 0.9.19.0
LukeyWolf said:
Yes, 0.9.19.0
Click to expand...
Click to collapse
I dont know what the problem is.
Deinstall Flashtool, reboot your PC and then install it again.
PFM said:
I dont know what the problem is.
Deinstall Flashtool, reboot your PC and then install it again.
Click to expand...
Click to collapse
I'll give it a go
LukeyWolf said:
I'll give it a go
Click to expand...
Click to collapse
If it doesnt work try other USB cables. That might be error in some cases.
PFM said:
If it doesnt work try other USB cables. That might be error in some cases.
Click to expand...
Click to collapse
And remember to don't use USB 3.0 port (2.0 is ok)
Tapped from Xperia E4g
Nensher said:
And remember to don't use USB 3.0 port (2.0 is ok)
Tapped from Xperia E4g
Click to expand...
Click to collapse
Finally downgraded and upgraded with root, turns out that wiping cache and user data doesn't work but with it those options off, it works!
Thanks to all of you trying to help me out!
I cant find x.x.x.1.28
LukeyWolf said:
Finally downgraded and upgraded with root, turns out that wiping cache and user data doesn't work but with it those options off, it works!
Thanks to all of you trying to help me out!
Click to expand...
Click to collapse
Can you please give a link to download the firmware x.x.x.1.28? I want to downgrade!
RealNightFury said:
Can you please give a link to download the firmware x.x.x.1.28? I want to downgrade!
Click to expand...
Click to collapse
Download it from flashtool
CLick on the XF button
Related
Hello All,
I bricked my x10, and did a PC companion update repair. I also reformatted the sd card. However, now I cannot root with z4. It is stuck on " running exloit in order to obtain root access, or that it exits and when I try to go back into the program, it says that an unexpected error had occurred and need to force stop. Once its force stopped, I cannot go back into the program. I tried restarting the phone, but the same thing happened. I reformatted my phone and card two more times, but same problem exists. Please help! Thanks!
projectseahorse said:
Hello All,
I bricked my x10, and did a PC companion update repair. I also reformatted the sd card. However, now I cannot root with z4. It is stuck on " running exloit in order to obtain root access, or that it exits and when I try to go back into the program, it says that an unexpected error had occurred and need to force stop. Once its force stopped, I cannot go back into the program. I tried restarting the phone, but the same thing happened. I reformatted my phone and card two more times, but same problem exists. Please help! Thanks!
Click to expand...
Click to collapse
Make sure you have USB debugging and Unknown sources checked.
they are both on, and yet it is still stuck =[ what should I do to fix it?
projectseahorse said:
they are both on, and yet it is still stuck =[ what should I do to fix it?
Click to expand...
Click to collapse
Try uninstalling it. Then, make sure you download it to the sdcard before you install it using Astro or equivalent. I had a similar problem when I tried to install it straight from dropbox rather than downloading it to the sdcard first and then installing it.
I hope you are not trying to root the latest Generic 2.0.2.A.0.24 FW because that is not rootable at the moment?
how do I know if I have the Generic 2.0.2.A.0.24 FW?? I went to 'about phone" and only see that the firmware version is 2.1 update1. is that the unrootable firmware? I also tried using astro to install it thru sd card but it still doesnt work..... maybe I should just root it with one click and not use z4 anymore?
projectseahorse said:
how do I know if I have the Generic 2.0.2.A.0.24 FW?? I tried using astro to install it thru sd card but it still doesnt work..... maybe I should just root it with one click and not use z4 anymore?
Click to expand...
Click to collapse
Go to settings --> about phone and scroll down. It should tell you what build you have.
aiya... it appears that I do have the 2.0.2.A.0.2.4 FW. thats why z4root wont work..... is there a way that I can revert back the firmware? is this FW recently released? What is the advantage of this FW over the older version?? Thanks
projectseahorse said:
aiya... it appears that I do have the 2.0.2.A.0.2.4 FW. thats why z4root wont work..... is there a way that I can revert back the firmware? is this FW recently released? What is the advantage of this FW over the older version?? Thanks
Click to expand...
Click to collapse
Yes it is recently released. It is a minor update that fixes some bugs but, there is no official changelog from SE. You can flash back to older FW from here.
batman_112 said:
Yes it is recently released. It is a minor update that fixes some bugs but, there is no official changelog from SE. You can flash back to older FW from here.
Click to expand...
Click to collapse
.
Oh I forgot to mention that you can also flash the new pre-rooted FW from here.
thanks for the help, but i'm very new to this whole rooting thing. How do I go into xrecovery ??thanks!
projectseahorse said:
thanks for the help, but i'm very new to this whole rooting thing. How do I flash the pre rooted firmware? How do I go into xrecovery and how do I work this x10flash? Thanks!
Click to expand...
Click to collapse
First, install X-recovery and read the instructions here.
Second, go here and follow the instructions in post #1.
Third, go here to install JiT.
Each post has very simple instructions, so just read through them. Hope this helps.
Thanks for the help, but can I install xRecovery on an un-rooted phone? Because the xRecovery post says that the requirement is that the phone must be un-rooted .... do I still have a chance?
projectseahorse said:
Thanks for the help, but can I install xRecovery on an un-rooted phone? Because the xRecovery post says that the requirement is that the phone must be un-rooted .... do I still have a chance?
Click to expand...
Click to collapse
You can flash to an older FW from the link I gave you earlier in post #8. Use Z4root to root and then install x-recovery.
which firmware should I download? I have a x10i, but the firmware in the flashing post only have Nordic, German and CH under x10i. Is there an English version? Thanks!
i've up my phone with seus & i've the same probleme
Very thank for you job, with you i've repaired my x10 and rerooted yeah ^^
BIG UP
projectseahorse said:
which firmware should I download? I have a x10i, but the firmware in the flashing post only have Nordic, German and CH under x10i. Is there an English version? Thanks!
Click to expand...
Click to collapse
Download the X10i global from here.
got it work by re-flahsing it back to the old FW. Didnt bother to update to the newer FW, but everything feels fine! Thanks everyone!
Do we need to re-root and re install all the apps everytime that there is a FW update? like re do the whole process when a new FW gets released??
projectseahorse said:
got it work by re-flahsing it back to the old FW. Didnt bother to update to the newer FW, but everything feels fine! Thanks everyone!
Do we need to re-root and re install all the apps everytime that there is a FW update? like re do the whole process when a new FW gets released??
Click to expand...
Click to collapse
Yes we do.
hi, i have a Lenovo S930 with official update android kitkat 4.4.2 and i kinda need help at rooting
i've tried some rooting program, even "one-click root" cannot do it. thought from the start (was a 4.2.2 jellybean first bought it) i did rooting it
can anyone help?
...seems no one answer
DGKILL87 said:
hi, i have a Lenovo S930 with official update android kitkat 4.4.2 and i kinda need help at rooting
i've tried some rooting program, even "one-click root" cannot do it. thought from the start (was a 4.2.2 jellybean first bought it) i did rooting it
can anyone help?
Click to expand...
Click to collapse
Hi,
I can understand your problem.
Download it and run on PC, Its VROOT setup for lenovo.
http://cdnpic.mgyun.com/files/produ...6286208/VRoot_1.7.8.7753_cid2040_44c47ecb.exe
If it doesn't work then follow this:
1. open this link:
http://www.mgyun.com/vroot
2. Select ROOT MASTER (PC)
3.Click on download.
Done , root again using your pc.
MUST SAY THANKS, IF I HELP YOU.
GOOD LUCK.
Need help then reply me.
djhot143 said:
Hi,
I can understand your problem.
Download it and run on PC, Its VROOT setup for lenovo.
http://cdnpic.mgyun.com/files/produ...6286208/VRoot_1.7.8.7753_cid2040_44c47ecb.exe
If it doesn't work then follow this:
1. open this link:
http://www.mgyun.com/vroot
2. Select ROOT MASTER (PC)
3.Click on download.
Done , root again using your pc.
MUST SAY THANKS, IF I HELP YOU.
GOOD LUCK.
Need help then reply me.
Click to expand...
Click to collapse
After upgraded to kitkat, no VROOT or 360.cn root one-click root tools are capable to preform root s930. The only way I got successful to root my phone through install TWRP recovery for s930 and flash root package by TWRP
Search internet to study how to install TWRP and root package here
edmond25 said:
After upgraded to kitkat, no VROOT or 360.cn root one-click root tools are capable to preform root s930. The only way I got successful to root my phone through install TWRP recovery for s930 and flash root package by TWRP
Search internet to study how to install TWRP and root package here
Click to expand...
Click to collapse
totally agree! I had the same experience.
I am not denying to you. But I have rooted my phone using vroot only. After upgrading you have to use fress upgraded version of vroot. And one more thing for super user app you can download SuperSU ( chainfair ) from play store. Use latest version of SuperSU app.
edmond25 said:
After upgraded to kitkat, no VROOT or 360.cn root one-click root tools are capable to preform root s930. The only way I got successful to root my phone through install TWRP recovery for s930 and flash root package by TWRP
Search internet to study how to install TWRP and root package here
Click to expand...
Click to collapse
djhot143 said:
I am not denying to you. But I have rooted my phone using vroot only. After upgrading you have to use fress upgraded version of vroot. And one more thing for super user app you can download SuperSU ( chainfair ) from play store. Use latest version of SuperSU app.
Click to expand...
Click to collapse
I tried to download updated version VROOT but Antivirus prompt it Trojan inside. Even I took risk to download to a computer (brand new computer without important things). I did root phone but not successful. I am interesting that what version VROOT you were using to root 4.4.2?
Other things, SuperSU has problem after flashed to phone. it seems to be OK and grant root right to apps such as Titanium backup. However, when you open SuperSU,it will prompt you SU binary need to be updated. It is NEVER successful the update. I download most updated version SuperSU 2.02 but same error. Finally, a Chinese web site, someone using I post root package and successful. I did root by this package, everything fine.
I am extremely sorry brother , In previous post i pasted the wrong link that is for android 4.2 version.
follow this for android 4.4.+ version::::::::
1. Download driver for your phone on pc. Use pdanet to download driver.or search in google for s930.
2. download it: Romaster_3.4.6.8285
http://soft.mgyun.com/files/products/romasterlab/1000/2014/50595328/Romaster_3.4.6.8285_Setup.exe
3. turn on USB DEBUG in your phone.
4. Install RootMaster that you have downloaded alredy.
5.Open it, Click on ROOT at bottom.Wait for status. Then click on ROOT. And wait to reboot your phone .After that ROOTMASTER will check that status of your phone.
You will get status as Rooted .
All DONE and have fun.
Then Install SuperSU:
https://play.google.com/store/apps/details?id=eu.chainfire.supersu
When you open it Then,
You should choose "Normal Installation" when it will prompt.
Done .
Say Thanks If it helps you.
edmond25 said:
I tried to download updated version VROOT but Antivirus prompt it Trojan inside. Even I took risk to download to a computer (brand new computer without important things). I did root phone but not successful. I am interesting that what version VROOT you were using to root 4.4.2?
Other things, SuperSU has problem after flashed to phone. it seems to be OK and grant root right to apps such as Titanium backup. However, when you open SuperSU,it will prompt you SU binary need to be updated. It is NEVER successful the update. I download most updated version SuperSU 2.02 but same error. Finally, a Chinese web site, someone using I post root package and successful. I did root by this package, everything fine.
Click to expand...
Click to collapse
djhot143 said:
I am extremely sorry brother , In previous post i pasted the wrong link that is for android 4.2 version.
follow this for android 4.4.+ version::::::::
1. Download driver for your phone on pc. Use pdanet to download driver.or search in google for s930.
2. download it: Romaster_3.4.6.8285
http://soft.mgyun.com/files/products/romasterlab/1000/2014/50595328/Romaster_3.4.6.8285_Setup.exe
3. turn on USB DEBUG in your phone.
4. Install RootMaster that you have downloaded alredy.
5.Open it, Click on ROOT at bottom.Wait for status. Then click on ROOT. And wait to reboot your phone .After that ROOTMASTER will check that status of your phone.
You will get status as Rooted .
All DONE and have fun.
Then Install SuperSU:
https://play.google.com/store/apps/details?id=eu.chainfire.supersu
When you open it Then,
You should choose "Normal Installation" when it will prompt.
Done .
Say Thanks If it helps you.
Click to expand...
Click to collapse
Did you try to open SuperSU and prompt you update SU Binary? I did similar thing of you mention but SuperSU alway prompt me update binary but never successful
Yes I installed it and working fine. Earlier I was also not able to use it but after getting kitkat its working.
Do one thing, first uninstall SuperSU. Root your phone then install SuperSU from play store only. Don't use any backup apk.
edmond25 said:
Did you try to open SuperSU and prompt you update SU Binary? I did similar thing of you mention but SuperSU alway prompt me update binary but never successful
Click to expand...
Click to collapse
djhot143 said:
Hi,
I can understand your problem.
Download it and run on PC, Its VROOT setup for lenovo.
http://cdnpic.mgyun.com/files/produ...6286208/VRoot_1.7.8.7753_cid2040_44c47ecb.exe
If it doesn't work then follow this:
1. open this link:
http://www.mgyun.com/vroot
2. Select ROOT MASTER (PC)
3.Click on download.
Done , root again using your pc.
MUST SAY THANKS, IF I HELP YOU.
GOOD LUCK.
Need help then reply me.
Click to expand...
Click to collapse
it works and can rooted, thank you
but why suddenly changed to jelly bean?
well the first time i click the 4.4.2 thingy on the about phone
when i click the kitkat logo....it happens a jelly beans
was it a bug or its downgraded?
Reboot and check again, if doesn't work then you have to re upgrade, might be there was some internet problem while downloading.
DGKILL87 said:
it works and can rooted, thank you
but why suddenly changed to jelly bean?
well the first time i click the 4.4.2 thingy on the about phone
when i click the kitkat logo....it happens a jelly beans
was it a bug or its downgraded?
Click to expand...
Click to collapse
Hard to understand
edmond25 said:
Did you try to open SuperSU and prompt you update SU Binary? I did similar thing of you mention but SuperSU alway prompt me update binary but never successful
Click to expand...
Click to collapse
DGKILL87 said:
it works and can rooted, thank you
but why suddenly changed to jelly bean?
well the first time i click the 4.4.2 thingy on the about phone
when i click the kitkat logo....it happens a jelly beans
was it a bug or its downgraded?
Click to expand...
Click to collapse
Judging from grammar and the link to the app given which is 99% in chinese language, I dont understand the instruction from the given app. Please provide the English version.
i want a lolipop rom for my lenovo s930 to apply in sp flash tools
So, here is the .84 firmware with -86 baseband for the GSM Xperia Play.
From what I see, there are a few firmware changes since .79 firmware and a baseband update. Also, some applications like the Browser and the Phonebook seem to have some changes.
Download: R800i_4.0.2.A.0.84_Vodafone_DE_(1247-8566).ftf
How to Root:
1 - Download All 3 files from this Repository: .84 Firmware Rook Kit
2 - Flash R800i_.79_Kernel.ftf using Flashtools
3 - Root Phone using Eroot1.3.5.exe Tool
4 - Flash R800i_.84_Kernel.ftf using Flashtools
4 - Enjoy your .84 Rooted Firmware!
Thank you all!
Nice Man... Thanks
Sent from my R800a using XDA Free mobile app
appreciated!
I am sorry to ask, but how do I install this? I am a novice. the last update I booted in recovery and installed the zip. this is a ftf file and don't know how to install.
thank you.
legacygt777 said:
appreciated!
I am sorry to ask, but how do I install this? I am a novice. the last update I booted in recovery and installed the zip. this is a ftf file and don't know how to install.
thank you.
Click to expand...
Click to collapse
you need to flash it Via app called flashtool on windows
fliperpl said:
you need to flash it Via app called flashtool on windows
Click to expand...
Click to collapse
so I got the flashtool loaded on my pc. I put the firmware in the folder. installed the drivers from the flashtools. when it gets to the point where it says for me to unplug and power off the device, it says there's an error and that I need to install drivers.
can someone help? thanks
legacygt777 said:
so I got the flashtool loaded on my pc. I put the firmware in the folder. installed the drivers from the flashtools. when it gets to the point where it says for me to unplug and power off the device, it says there's an error and that I need to install drivers.
can someone help? thanks
Click to expand...
Click to collapse
install flash mode fastboot,xperia play, drivers from C:\flashtool\drivers
fliperpl said:
install flash mode fastboot,xperia play, drivers from C:\flashtool\drivers
Click to expand...
Click to collapse
I installed flash tool 64
I clicked on flash icon
clicked on flashboot mode
"xperia play" I don't see this?
Tutorial...
legacygt777 said:
I installed flash tool 64
I clicked on flash icon
clicked on flashboot mode
"xperia play" I don't see this?
Click to expand...
Click to collapse
How to say hmmmm.... I make some screen shot
1) go to flashtool folder-->drivers--> click to FlashTool-drivers.exe not rar...
2)
thats all
Back on topic, is this any different from the other 8X version? I think its name was "Docomo".
Frutak said:
How to say hmmmm.... I make some screen shot
1) go to flashtool folder-->drivers--> click to FlashTool-drivers.exe not rar...
2)
thats all
Click to expand...
Click to collapse
thanks for the details and patience. don't know what happened but the whole processed put me back on stock factory from the beginning. lol such a noob on this. oh well.
Toasty Clown said:
Back on topic, is this any different from the other 8X version? I think its name was "Docomo".
Click to expand...
Click to collapse
Docomo Fw: 4.0.1.C.0.86
This Fw: 4.0.2.A.0.84
This Firmware is newer, it has some diferente apps, and baseband changes
does anyone know how to root this new fw?
pipyakas said:
does anyone know how to root this new fw?
Click to expand...
Click to collapse
This might help: http://forum.xda-developers.com/showthread.php?p=40431122
Cant root the firmware... with this tool ( http://forum.xda-developers.com/showthread.php?p=40431122 )
flow27 said:
Cant root the firmware... with this tool ( http://forum.xda-developers.com/showthread.php?p=40431122 )
Click to expand...
Click to collapse
I have used this:http://forum.xda-developers.com/showthread.php?t=2054504
Method 2 ) its working, but you must change kernel from stock to--> (Lupus, doomkernel)
I could not root my 800at phone with this firmware. I am on a locked bootloader/stock kernel. ive used 2 programs to root.
try to flash .79 kernel, then root, then flash .84 kernel again, it might work.
Added Root Method to first post!
I found i file call rootxperia.zip, flashed it nthrough cwm and it worked
However, i got my flex cable mal functioned, so im saying goodbye to xpkay soon since in my place there is no way to fix it
pipyakas said:
I found i file call rootxperia.zip, flashed it nthrough cwm and it worked
However, i got my flex cable mal functioned, so im saying goodbye to xpkay soon since in my place there is no way to fix it
Click to expand...
Click to collapse
I know it works, but you need to unlock the bootloader to do it that way
Root method for 5.1.1 for the SM-G360T1 THIS WILL TRIP KNOX. If you don't want to trip knox don't use this. If you do use it and whine you tripped knox because you didn't read ,we will all point and laugh at you.
Named it TrapKernel because well its not my normal HispAsian Kernel and I listened to a crap ton of Trap Music while doing it.
Thanks to @g.lewarne and his root method with his Unibase and Unikernel for the s6 , we finally have root after I ported it over to us. So be sure to thank him for his work.
What's included:
Auto installation of root and busy box
Kernel set to permissive
Otherwise stock
So here's the deal. Stupid simple.
Before you do anything, go to settings/about device and tap Build Number til you unlock dev options. Go into dev options and make sure OEM Unlock is checked. Now you can continue.
1. Put Phone in Download mode
2. Open Odin
3. Connect Phone
4. Put Kernel in AP Slot
5.Flash it
6. Reboot and profit
Notes:
Download SuperSu from the Playstore. Its not included.
If at first it doesnt boot, pull the battery and reboot.
Video Tutorial of Installation Thanks to @TheDerekHarper
https://www.youtube.com/watch?v=RWm3auBSsU4
Download
Do NOT mirror this link. Period.
[FONT="Lucida Sans]links removed. It's outdated by years lol[/URL][/FONT]
[B][FONT="Lucida Sans Unicode"]Special thanks to:
@g.lewarne for the obvious reason of being awesome and his root method for the s6.
@bogarty for testing multiple tests
@Chainfire for SuperSU
[/B][/FONT]
Heres the kernel source that is set to permissive and will allow root if anyone wants to fork it and build a kernel:
Kernel Source Set to Permissive for the G360T1
Thank you for all your work!!!
Thanks For This Post And The Root For You And The Other Dude
ShinySide said:
Also mine
Click to expand...
Click to collapse
Glad It Works Just Tried It Out Hope We Get Some Roms And Other Stuff Like That
ShinySide said:
Also mine
Click to expand...
Click to collapse
2 in one day crazy!
please help m i could not root my samsung with this method
Deandre7452 said:
Glad It Works Just Tried It Out Hope We Get Some Roms And Other Stuff Like That
Click to expand...
Click to collapse
i could ot root mine,,root failed please help me:crying:
osk4rin said:
i could ot root mine,,root failed please help me:crying:
Click to expand...
Click to collapse
Hmmm...make sure that you have:
1) The "SM-G360T1".
2) The latest firmware: "G360T1UVU1AOFA".
3) Followed all the steps in the OP.
Sent from my SM-G360T1 using Tapatalk
osk4rin said:
i could ot root mine,,root failed please help me:crying:
Click to expand...
Click to collapse
Can't help if you're not actually going to explain how "root failed"
Root process fail (odin)
ShinySide said:
Can't help if you're not actually going to explain how "root failed"
Click to expand...
Click to collapse
Hi there!
I tried to root my Samsung g360t1 followed all the steps.
I have the latest firmware.,I attached the file on Odin and at the end at
The process fail.
Can I have your help please!!thanks
osk4rin said:
Hi there!
I tried to root my Samsung g360t1 followed all the steps.
I have the latest firmware.,I attached the file on Odin and at the end at
The process fail.
Can I have your help please!!thanks
Click to expand...
Click to collapse
Change usb ports, try different cable,make sure drivers are installed, disable/Uninstall kies if you have it installed on pc.
The flashing part went fine. then the reboot and I tried to install SuperSU. It wants to update the binary and has tried several times with no luck. then it reboots and now wont come back on..... I got this phone yesterday,
Longturd said:
The flashing part went fine. then the reboot and I tried to install SuperSU. It wants to update the binary and has tried several times with no luck. then it reboots and now wont come back on..... I got this phone yesterday,
Click to expand...
Click to collapse
Just dont update it. Su included is the absolute latest already. Its actually the 2.49 beta
ShinySide said:
Just dont update it. Su included is the absolute latest already. Its actually the 2.49 beta
Click to expand...
Click to collapse
root checker says its not rooted..... something went wrong but I have flashed a bunch of phones and Im pretty sure I did right.
.I have a notification that says "security notice" and some thing about unauthorized action. reboot to restore
Longturd said:
root checker says its not rooted..... something went wrong but I have flashed a bunch of phones and Im pretty sure I did right.
.I have a notification that says "security notice" and some thing about unauthorized action. reboot to restore
Click to expand...
Click to collapse
You are a G360T1 and not any other variant correct?
ShinySide said:
You are a G360T1 and not any other variant correct?
Click to expand...
Click to collapse
yes.... would not make that mistake
the phone is working but there is no root
Longturd said:
yes.... would not make that mistake
the phone is working but there is no root
Click to expand...
Click to collapse
Alright Ill look into it when I get a minute. Out of the 50 downloads over night no one else has mentioned.
ShinySide said:
Alright Ill look into it when I get a minute. Out of the 50 downloads over night no one else has mentioned.
Click to expand...
Click to collapse
does oem unlocking matter? in developer options
the phone is cool now. I killed the warranty and dont have root but there is hope
I'm getting an error message in download mode...
"Custom Binary(boot) Blocked by FAP Lock"
Sent from my SM-G360T1 using XDA Free mobile app
givo7192 said:
I'm getting an error message in download mode...
"Custom Binary(boot) Blocked by FAP Lock"
Sent from my SM-G360T1 using XDA Free mobile app
Click to expand...
Click to collapse
fix: open settings do a search for reavtivation lock and sign into your samsung account and disable it
error on dowload mode
ShinySide said:
fix: open settings do a search for reavtivation lock and sign into your samsung account and disable it
Click to expand...
Click to collapse
i have the same message!! on download mode
custom Binary(boot) Blocked by FAP lock
any help please master?
After a few years I want to give my old X10 a new life.
I can't login because I don't know the pattern, the e-mailaddress isn't working and the secret question is wrong also.
I tried to get in the recovery menu, but can't get in to it.
I tried PC Companion to restore it, but get the message 'Can't download software. Check your internet connection' (roughly translated).
How can I completely reset the device?
I think there is a custom rom on it, but I don't know which one.
ffortissimo said:
After a few years I want to give my old X10 a new life.
I can't login because I don't know the pattern, the e-mailaddress isn't working and the secret question is wrong also.
I tried to get in the recovery menu, but can't get in to it.
I tried PC Companion to restore it, but get the message 'Can't download software. Check your internet connection' (roughly translated).
How can I completely reset the device?
I think there is a custom rom on it, but I don't know which one.
Click to expand...
Click to collapse
Flash stock ROM via flashtool, use only ver. 18.5 or 18.6
yurasik_687 said:
Flash stock ROM via flashtool, use only ver. 18.5 or 18.6
Click to expand...
Click to collapse
Is there a Linux-way?
update : of course there is, flashtool
yurasik_687 said:
Flash stock ROM via flashtool, use only ver. 18.5 or 18.6
Click to expand...
Click to collapse
^_^ Hello Yura, I wonder If I can't change the phone setting "unknown sources" and "USB debugging", is it still able to stock a new ROM? meow~ thank you! @[email protected]
qsluna said:
^_^ Hello Yura, I wonder If I can't change the phone setting "unknown sources" and "USB debugging", is it still able to stock a new ROM? meow~ thank you! @[email protected]
Click to expand...
Click to collapse
of course you can.
Flash stock ROM via flashtool 0.9.18.5 or older (I use ver. 0.9.8.0 - works perfect).
yurasik_687 said:
of course you can.
Flash stock ROM via flashtool 0.9.18.5 or older (I use ver. 0.9.8.0 - works perfect).
Click to expand...
Click to collapse
Thank you for the inspiration!!! ^_^ HOHO~ I am going to try now~
yurasik_687 said:
of course you can.
Flash stock ROM via flashtool 0.9.18.5 or older (I use ver. 0.9.8.0 - works perfect).
Click to expand...
Click to collapse
Thanks veeeerrrry much, Yurasik!!!! I have solved my problem!!!!! I can use my phone now again!!! HOHOHO~:laugh::victory: