Is that logo on the back cover removeable with alcohol or something?
I want to know so I can decide whether to buy the 850F back cover or not.
Related
So, planning to get the gsm version of 3VO when it's out in the UK But imo i think the golden rim surrounding the camera(s) is not as good as the red one.
Can anyone confirm that the rim is fixed on the back cover or the camera?
Is it possible to switch the cover and that makes a perfect phone for me
RED IS THE NEW BLACK! ANYONE?
It's fixed on the cover.
Its attached to the cover, but you might not be able to swap it that easy because of the placement of phone parts.
http://www.youtube.com/watch?v=x1x55gEKSiI&feature=youtu.be
The above clip is a video of my problem
So I have been on a 2 month odyssey with my uk, euro titan and its original back cover, although I had its original back cover painted white and works great, I have been trying to buy replacement back covers from ebay only to find that they do not securely fit, after a few tugs, pulling it out of my pocked or just letting it drop lightly say on my couch, the back cover and phone easily come apart.
I have purchased from sellers in china and even purchased from a supposed uk seller from ebay.co.uk who turned out to still be a seller in china, both covers do clasp into place with the phones screen/guts, but pop easily out with the slightest bump.
I currently am in contact with HTC America who are going to send me an oem back cover however it has been backordered for 2 weeks now.
although I love my painted white back cover, it has experienced wear and tear and i just long for things to be "normal" again. my question is has anyone heard of this problem with the titan and back covers that don't fit properly? besides buying a $70 oem back cover from htc uk accessories, does anyone have any tips or know anything that could help?
I also want to mention I had sent my phone to htc America to replace the screen, gps and the worn out "button presses" on the inside of the phone. and they did, they replaced each and every single thing including the inner plastic body lining where the volume button "presses" are and the plastic surrounding the sim card all replaced, I can only guess that if maybe I did not ask to replace this plastic that hooks itself to the back cover that maybe any grey market back cover would have fit securely?
and also want to mention yes my original back cover that is painted still fits and firmly grips the phone, when I look at all 3 back covers the 2 from china and my painted oem back cover, I can't tell a difference at all in their inner workings SIGH
I recently picked one up used because I needed something smaller and more durable than my GS3.
But I've noticed that my battery cover doesn't seem to clip on correctly.
When I hold it a certain way, the clips snap back in, but then pop right out. I also noticed that the corner
where the cell phone strap is creeks.
Is there a special way to put it on that I am not aware of or did I just buy a phone with a faulty back cover?
Thanks!
Does anyone know where I could go to buy The Red Back cover?
First of all everything works fine. The problem is that the sticker I installed on the original back cover is slightly thicker than the original. When placing the cover back on the phone it is very tight. I've noticed that the LCD screen is pushing away from the frame on the left side of the phone (it's secured with glue). My quandary is should I unroot and send it back and get a different phone or just use my case to tuck in the screen? Will problems slowly start to arise?
Thanks
rtkhammer