Related
Hi guys,I made a working recovery for Xperia sp and have tested by China users. Now I share you a English version of recovery
[How to use]
Unlock your bootloader
reboot your phone into fastboot mode
flash the kernel with fastboot.
fastboot flash boot kernel.elf
credits:
Koush for recovery source
DoomLoRD for init.d scripts support and the fstab
FXP for boot scrpits.
[Download]
https://docs.google.com/file/d/0B8xetVDZBRDiS09rRXVLYlA2YzA/edit?usp=sharing
[Sourcecode]
https://github.com/sj8023ld/Recovery_SP
good work..
hope the tips i sent u were useful
Testing it now.....
Edit: So far so good. Phone boots normally. So how do i access CWM through hardware keys?
DooMLoRD said:
good work..
hope the tips i sent u were useful
Click to expand...
Click to collapse
Yes,it's very useful! Thank you again!
How do i access the CWM?
Nicksilvers said:
How do i access the CWM?
Click to expand...
Click to collapse
press volume + when show the bootlogo
sj8023ld said:
Hi guys,I made a working recovery for Xperia sp and have tested by China users. Now I share you a English version of recovery
[How to use]
Unlock your bootloader
reboot your phone into fastboot mode
flash the kernel with fastboot.
fastboot flash boot kernel.elf
credits:
Koush for recovery source
DoomLoRD for init.d scripts support and the fstab
FXP for boot scrpits.
[Download]
https://docs.google.com/file/d/0B8xetVDZBRDiS09rRXVLYlA2YzA/edit?usp=sharing
[Sourcecode]
https://github.com/sj8023ld/Recovery_SP
Click to expand...
Click to collapse
So just a heads up here, i managed to test the CWM, it works! Just that i think people might find it hard to go into recovery mode. Have your phone TURNED OFF. HOLD VOLUME UP + POWER BUTTON at the same time. Once a blue flash and the first vibration occurs, you can now immediately release the POWER BUTTON. But keep holding onto the VOLUME UP BUTTON. Once the Boot logo shows up followed by the 2nd vibration, you can now immediately release the VOLUME UP BUTTON. You'll go into CWM Mode
Ok, just a little report. I just had 2 FCs now after installing it yesterday. Not a big issue to me. I'm guessing i should just fix permissions.
I suggest you write a new topic in Xperia sp forum
我建议你在Xperia sp论坛再发一个帖子
某龙兄 said:
I suggest you write a new topic in Xperia sp forum
我建议你在Xperia sp论坛再发一个帖子
Click to expand...
Click to collapse
no need... i have contacted XDA Site admins to move this thread
Love you Sj~
Root??
Do we have to root the phone before installing recovery?? How to root?
GTM_rhinox said:
Do we have to root the phone before installing recovery?? How to root?
Click to expand...
Click to collapse
Ofcourse u need root acces.. And for now root is available only for Unlocked Bootloader..
Here it is
http://forum.xda-developers.com/showthread.php?t=2272741
Do at your own risk... But if u unlock ur bootloader means u will lost ur DRM key with Bravia Engine 2...
The SU binary and busybox seems to be installed incorrectly. There is no request for superuser access and many scripts have problems finding busybox. I have to flash a superuser zip and install busybox manually.
Thank you so much for this CWM! But i've few questions!!
I'm first gonna flash Extended Stock Kernel,Then my phone is rooted!!
Inorder to get CWM, i flash this kernel, does that mean, i will lose the essentials of the extended stock kernel (root+features)??
spurgeonjudah said:
Thank you so much for this CWM! But i've few questions!!
I'm first gonna flash Extended Stock Kernel,Then my phone is rooted!!
Inorder to get CWM, i flash this kernel, does that mean, i will lose the essentials of the extended stock kernel (root+features)??
Click to expand...
Click to collapse
Just flash this kernel and there will be root and cwm. No need to flash other kernel. Only unlocked bootloader need.
After flashing install Superuser or SuperSU from market and update su binary.
alivanov79 said:
Just flash this kernel and there will be root and cwm. No need to flash other kernel. Only unlocked bootloader need.
After flashing install Superuser or SuperSU from market and update su binary.
Click to expand...
Click to collapse
cool Thanks! will give it a try
I re-flashed the stock kernel via flashtool and the .ftf, but now my phone refuses to charge turned off...is there any way to fix this?
Use the power off button at the back to make sure its turned off. Then try flashing again and rebooting...
Sent from my Xperia U using xda app-developers app
I'm using Xperia L, will it work ?
I'm already root w/o unlock bootloader using Framaroot..
Thanks!
SpaceX Kernel Pure Edition
Samsung Galaxy Note 5/S6 Edge+
SpaceX Kernel Features
- Base Stock Kernel/DTB latest
- Stable, battery life optimize
- SELinux Enforcing
- KNOX WARRANTY VOID: 1
- Ramdisk modified:
Patched sepolicy (By SuperSU 2.52 @Chainfire)
Disabled dmverity (if applicable)
Disabled forceencrypt (if applicable)
Auto Root/Busybox
Init.d script support
su.d script support
Auto-Kill Knox/SecurityLogAgent
Deep Sleep fix
Private Mode fix
Wifi pass forget fix
Ram Management optimize
Random reboot/Reboot in calling fix (Note 5/S6e+)
SQLite3 3.8.11.1 binary and optimization script
At every boot the FsTrim command will be excecuted, to keep your Phone smooth and the internal memory fast!
Supported devices
N920C
N920G
N920I
N920K
N920L
N920S
N920T
N920P
N9208
N9200
N920R4
S6 Edge+, soon...
Download
SamFirm.Net
Install Guide
- Via Odin:
Make sure OEM unlock & Usb debugging is also enabled as well (Developer option)
Boot your Note 5 into Download Mode & connect to PC
Flash SpaceX kernel via Odin 3.10.7 in [AP]
After boot: install SuperSU-2.52.apk
Done
Click to expand...
Click to collapse
- Via Recovery custom:
Make sure OEM unlock & Usb debugging is also enabled as well (Developer option)
Copy Kernel (.zip) file to your devices
Boot your Note 5 into Download Mode & connect to PC
Flash your Recovery custom via Odin 3.10.7 in [AP]
Boot into Recovery, flash Kernel
After boot: install SuperSU-2.52.apk
Done
Click to expand...
Click to collapse
Special thanks
@Chainfire - SuperSU 2.50+, patched sepolicy support for Root Android 5.1.1/6.0 with SELinux in Enforcing mode.
XDA:DevDB Information
[Kernel] SpaceX Pure Edition - Stock Modified Ramdisk, Kernel for the Samsung Galaxy Note 5
Contributors
Manh_IT
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 1.0.0
Beta Release Date: 2015-10-30
Created 2015-10-29
Last Updated 2015-11-04
Reserved
Reserved
Good to see N9208 support. Thx dude.
cornelito said:
Good to see N9208 support. Thx dude.
Click to expand...
Click to collapse
Please test and report
Thank !
flash with odin gave me an error and i prompted me to use smart switch to revert back to stock. luckily i was on a 100% stock rom so i just booted into recovery and factory reset
when flashing with custom recovery, flashes properly but when you boot into system it gets stuck on the boot screen (says samsung galaxy note 5) also says kernel is no seandroid enforcing if that matters
N920T, 100% stock rom
Does it have OC abilities?
I know N920CD (Dual SIM) is not mentioned in the list of supported devices but I thought I would check... is it supported?
guaneet said:
flash with odin gave me an error and i prompted me to use smart switch to revert back to stock. luckily i was on a 100% stock rom so i just booted into recovery and factory reset
when flashing with custom recovery, flashes properly but when you boot into system it gets stuck on the boot screen (says samsung galaxy note 5) also says kernel is no seandroid enforcing if that matters
N920T, 100% stock rom
Click to expand...
Click to collapse
I have so exactly the same errors with my N920C.
guaneet said:
flash with odin gave me an error and i prompted me to use smart switch to revert back to stock. luckily i was on a 100% stock rom so i just booted into recovery and factory reset
when flashing with custom recovery, flashes properly but when you boot into system it gets stuck on the boot screen (says samsung galaxy note 5) also says kernel is no seandroid enforcing if that matters
N920T, 100% stock rom
Click to expand...
Click to collapse
After flash finishing device will reboot 2 times, maybe you mistakenly took bootloop
hshah said:
I know N920CD (Dual SIM) is not mentioned in the list of supported devices but I thought I would check... is it supported?
Click to expand...
Click to collapse
Try with N920C kernel. If have bugs, fix soon...
Manh_IT said:
After flash finishing device will reboot 2 times, maybe you mistakenly took bootloop
Click to expand...
Click to collapse
i let it sit for ~5 minutes on the bootloader screen. i didnt see any boot animation scren
guaneet said:
i let it sit for ~5 minutes on the bootloader screen. i didnt see any boot animation scren
Click to expand...
Click to collapse
Ok, I recheck it.
Thank!
guaneet said:
i let it sit for ~5 minutes on the bootloader screen. i didnt see any boot animation scren
Click to expand...
Click to collapse
Try again
rebuild1: https://drive.google.com/folderview?id=0B40ItdHKfkyQdXFVYVFwU2x4azg&usp=sharing
Thank!
Manh_IT said:
Try again
rebuild1: https://drive.google.com/folderview?id=0B40ItdHKfkyQdXFVYVFwU2x4azg&usp=sharing
Thank!
Click to expand...
Click to collapse
still gets stuck on bootloader screen, let it sit for a few minutes. ill get last k_msg when i flash jovy's kernel
https://onedrive.live.com/redir?resid=87D629AAB1E96F70!868&authkey=!AJ8_0kmQggzb-24&ithint=file,
N920CD need some love
guaneet said:
still gets stuck on bootloader screen, let it sit for a few minutes. ill get last k_msg when i flash jovy's kernel
https://onedrive.live.com/redir?resid=87D629AAB1E96F70!868&authkey=!AJ8_0kmQggzb-24&ithint=file,
Click to expand...
Click to collapse
Rebuild2: https://drive.google.com/folderview?id=0B40ItdHKfkyQNDNqY0lLdUgycHc&usp=sharing
Manh_IT said:
Rebuild2: https://drive.google.com/folderview?id=0B40ItdHKfkyQNDNqY0lLdUgycHc&usp=sharing
Click to expand...
Click to collapse
success! thank you! if you need help testing anything in the future for the N920T just shoot me a pm!
guaneet said:
success! thank you! if you need help testing anything in the future for the N920T just shoot me a pm!
Click to expand...
Click to collapse
Ok, thank you!
Can you help me take a screenshot?
Manh_IT said:
Ok, thank you!
Can you help me take a screenshot?
Click to expand...
Click to collapse
Here ya go
Stock zImage
Add features:
RIC disabled
SElinux permissive
v2 - Debugging enabled by default
v2 - Disable debugging notification icon in the status bar
v2 - Kernel insecure (ro.secure=0)
v2 - Fix swappiness (100 to 60) - as 3.4 kernel source - Improved memory management
* Required Bootloader Unlocked!
* Recovery FOTAKernel: TWRP for Sony Xperia Z3 Compact
* Installation:
- Flash via recovery or unpack and flash boot.img via fastboot
- Enter recovery (power off the device and press volume down and then power simultaneously)
- Flash a Systemless SU: BETA-SuperSU-v2.68-20160228150503.zip
- Flash Restore DRM - SONY DRM FUNCTION RESTORATION FOR UB DEVICE
- Reboot.
Note:
- The first boot may take some time, and give the impression that you are in a bootloop. Just wait and it will boot up normally eventually.
* Please, do not mirror!
Download:
Kernel_systemless_MM_23.5.A.0.486_Z3C_v2
Enjoy and press the Thanks button if you like! :good:
.
Vou adicionar recursos mais tarde
You nailed it! Great work mate! Thanks!
Great work. It is ok
v2 out
Sorry to be a noob , but to install, am I right in thinking I need to do the following;
1) Flash the Marshmallow FTF
2) Flash twrp v3 using fastboot (fastboot flash recovery twrp3.img)
3) Flash the kernel using fastboot (fastboot flash boot boot.img)
4) Boot into recovery and flash SuperSU
5) Reboot into Marshmallow
I've been trying this and I haven't managed to get the system to boot into recovery after the kernel flash. Any guidance would be much appreciated
"- Flash Restore DRM - SONY DRM FUNCTION RESTORATION FOR UB DEVICE"
Sorry but this step will make bootlop
H0lmEd said:
Sorry to be a noob , but to install, am I right in thinking I need to do the following;
1) Flash the Marshmallow FTF
2) Flash twrp v3 using fastboot (fastboot flash recovery twrp3.img)
3) Flash the kernel using fastboot (fastboot flash boot boot.img)
4) Boot into recovery and flash SuperSU
5) Reboot into Marshmallow
I've been trying this and I haven't managed to get the system to boot into recovery after the kernel flash. Any guidance would be much appreciated
Click to expand...
Click to collapse
lamducthien said:
"- Flash Restore DRM - SONY DRM FUNCTION RESTORATION FOR UB DEVICE"
Sorry but this step will make bootlop
Click to expand...
Click to collapse
no flash marshmallow .ftf
you must go .264 FW
Flash .264 instead of MM
Here's Repack of the stock kernel
with dm-verity
SONY RIC off
SperSU EnableD
Working on Z4 Tablet (SGP771 - SGP712) 7.1.1 FW 32.4.A.0.160
DOWNLOAD:
SECOND POST
HOW TO INSTALL :
1. Extract zip file And Flash in Fastboot
2. Install TWRP 3.1.1.0 From Here
3. Then Flash SuperSU.zip From Here
4. Done You Get ROOT
Download section
Changelog :
SGP712 aded
dm-verity is Disabled
Sony RIC is Disabled
SR1-SuperSU-v2.82-SYSTEMMODE.zip Installed
busybox Installed
@IlariJ Now Done
Nimadroid said:
@IlariJ
Click to expand...
Click to collapse
THANKS!! :victory:
May i ask, ... would it be possible for you to make a kernel for the SGP712 - Wifi only version too?
Nimadroid said:
@IlariJ Now Done
Click to expand...
Click to collapse
The device boots fine (no longer infinite bootloop), but once it has powered up, the touchscreen doesn't work.
I have rebooted several times and no help.
In TWRP even the touch works.
Can You fix this? @Nimadroid
IlariJ said:
The device boots fine (no longer infinite bootloop), but once it has powered up, the touchscreen doesn't work.
I have rebooted several times and no help.
In TWRP even the touch works.
Can You fix this? @Nimadroid
Click to expand...
Click to collapse
Flash Stock ftf
Then Flash kernel
If don't change I make another one for you
Mr. Schnabel said:
May i ask, ... would it be possible for you to make a kernel for the SGP712 - Wifi only version too?
Click to expand...
Click to collapse
Provide me the kernel.sin from lastest FTF of your device
And i update this poet for you with your device kernel
@Nimadroid -> Send ya a PM
Nimadroid said:
Flash Stock ftf
Then Flash kernel
If don't change I make another one for you
Click to expand...
Click to collapse
Didn't help.:crying:
@ Mr. Schnabel : Goog idea
@ Nimadroid : Thanks in advance for the SGP772 version
ilarij said:
didn't help.:crying:
Click to expand...
Click to collapse
steevou said:
@ mr. Schnabel : Goog idea
@ nimadroid : Thanks in advance for the sgp772 version
Click to expand...
Click to collapse
post updated new device aded
Nimadroid said:
post updated new device aded
Click to expand...
Click to collapse
Kernel works, thanks
---------- Post added at 07:07 PM ---------- Previous post was at 07:02 PM ----------
SGP712 should use this recovery
https://www.androidfilehost.com/?fid=673368273298956222
Nimadroid said:
post updated new device aded
Click to expand...
Click to collapse
Works, thanks!! :victory:
Upgrade from 7.0
Hi,
quick question:
I am on 7.0 with root and DRM fix comming from here: "[Guide] Nougat with DRM fix, root and TWRP* (SGP771)".
Can I simply flash kernel and TWRP as you described on top of these or do I have to restart with any TFT's on 7.11?
Thanks a lot and best regards
Hi guys, i need your help!
Flashed new tft .160 via Flashtool - check
Flash boot via ADB - check
Flash Twrp via ADB - check
Reboot into recovery - nope nope nope ...
No matter what or how i flash i simply cannot boot into recovery
Tried older Twrp versions, in ADB shell everything is ok, no error, .....
simply don´t know what to do anymore hmmmmm ....
Mr. Schnabel said:
Hi guys, i need your help!
Flashed new tft .160 via Flashtool - check
Flash boot via ADB - check
Flash Twrp via ADB - check
Reboot into recovery - nope nope nope ...
No matter what or how i flash i simply cannot boot into recovery
Tried older Twrp versions, in ADB shell everything is ok, no error, .....
simply don´t know what to do anymore hmmmmm ....
Click to expand...
Click to collapse
If you're using SGP712 you need to flash the proper recovery for that device, the one in OP is for SGP771
This one is the correct one (also linked 3 posts above): https://www.androidfilehost.com/?fid=673368273298956222
Well .. actually OP and your´s in 3rd post and here are all 3 the same
Like said tried these here, from androPlus thread, etc etc ...
Flash via fastboot is working but cannot enter recovery after flashing
Tried to access via Power button, volume button, adb command, ... i dont even have a led signal at power on
Mr. Schnabel said:
Well .. actually OP and your´s in 3rd post and here are all 3 the same
Like said tried these here, from androPlus thread, etc etc ...
Flash via fastboot is working but cannot enter recovery after flashing
Tried to access via Power button, volume button, adb command, ... i dont even have a led signal at power on
Click to expand...
Click to collapse
oh, didn't notice, although I'm pretty sure the one in OP was different
It's booting on my device, but the first time I tried it didn't. I think it booted when I accidentally flashed it on the boot partition instead of the recovery one maybe you can try that.
but before, try hot booting it with:
Code:
fastboot boot ~/Downloads/TWRP-3.1.1-lineageos-karin_windy-20170520.img
Hotboot endet in an Bootloop but flashing recovery to Boot helped! Many many Thanks
€dit: Ok my bad didnt work ....
Hotboot didnt work
Flashing recovery to boot did boot up Twrp - Wiped cache/dalvik, flashed SU, Tablet constanty reboot into TWRP instead of system
Flashed Kernel/Boot to Boot - Tab boots into system but no root
Tried to reboot into recovery - no luck
THIS POST IS EXTENSION TO
https://forum.xda-developers.com/xp...t-xperia-x-f5122-android-n-34-2-2-47-t3594502
and
https://forum.xda-developers.com/xperia-x/development/root-xperia-x-f512234-3-0-206-7-1-1-t3635595
please read carefully and flash kernel for the LATEST UPDATE (Project SUZU )
for F5122_34.3.A.0.224 - 7.1.1 - 8 SEPTEMBER 2017 update
F5122 IS AT https://mega.nz/#F!GFo1EArZ!ngb5WsZJtbmFwXk_ImN-TA
F5121 .. https://mega.nz/#F!2EQniYoZ!0Rhj15GN7nSRmrTFMC8smg (THANKs @Mikolaj612 and @velemas )
-if you don't have th 34.3 fsc script , i have included in the folder (closing Partitions takes TIME, so be Patient ! )
-also i have inclused mixer_paths_wcd9335.xml, on 98% VOLUME level, IF you think sound output is LOW,,, just REPLACE it from /system/etc folder!
-
.
.
Click to expand...
Click to collapse
ROOT DIRECTORY (ON MEGA)
https://mega.nz/#F!aZAljazZ!zNLnLxH6flBxUsaTb167Jw
____________________________________
for F5122_34.3.A.0.217 - 7.1.1 - 8Aug2017 update
F5122 IS AT https://mega.nz/#F!iUB00abB!N7sDP1pv33ZCEC76j3RkYQ
F5121 .. AT https://mega.nz/#F!2FI0BI4B!f-wrWGTOzhgYX-_aLEBhBg ( THANK YOU @Mikolaj612 )
Code:
[SIZE="5"]
-if you don't have th 34.3 fsc script , i have included in the folder
-also i have inclused mixer_paths_wcd9335.xml, on 98% VOLUME level, IF you think sound output is LOW,,, just REPLACE it from /system/etc folder!
- :)
[/SIZE]
base directory
https://mega.nz/#F!aZAljazZ!zNLnLxH6flBxUsaTb167Jw
____________________________________________________
for F5122_34.3.A.0.206 - 7.1.1 - july2017 update
UPDATED KERNELS
F5121 IS AT https://mega.nz/#F!HcZmTIhR!0oCiMfh9uT-AdHp-bdSqZw (THANKS TO @velemas)
F5122 IS AT https://mega.nz/#F!fRBEVS5C!QjT-TgxZc9FYwAbh-F5IgA
F5121 here:
Code:
http://www100.zippyshare.com/v/gcX0M8iD/file.html
Mikolaj612 said:
F5121 here:
Code:
http://www100.zippyshare.com/v/gcX0M8iD/file.html
Click to expand...
Click to collapse
thank you,
link updated in the OT
have a great day!
I am using the same kernel which i have put on the cloud, f5122
however updatin to .224 via flashtool via win7pro took LONGER than usual time! , TA Partition Headers weren't closing! and eventually froze!
softBricked device twice! , then flashed via Windows 10 / 64bit from different machine!
however! please note!
the kernels are already rooted!
after FLASHING xperia X, if you DONT boot, and FLASH RECOVERY twrp3.1, via adb, adn boot X by pressing power+volumeDOWN key until PINK LED, you can FLASH kcal module! (which should be in your sd card, or use otg cable)
with Kcal you can use your device in gray scale - and it will extend your battery life to amazing level! since X has poor battery!
remember! if you have booted your X into system , the twrp will give PASSWORD error while accessing internal storage! because SONY encrypts storage on its VERY FIRST BOOT when you CLEAN FLASH STOCK ROM using FLASHTOOL!
YasuHamed said:
THIS POST IS EXTENSION TO
https://forum.xda-developers.com/xp...t-xperia-x-f5122-android-n-34-2-2-47-t3594502
and
https://forum.xda-developers.com/xperia-x/development/root-xperia-x-f512234-3-0-206-7-1-1-t3635595
please read carefully and flash kernel for the LATEST UPDATE (Project SUZU )
for F5122_34.3.A.0.224 - 7.1.1 - 8 SEPTEMBER 2017 update
F5122 IS AT https://mega.nz/#F!GFo1EArZ!ngb5WsZJtbmFwXk_ImN-TA
F5121 .. https://mega.nz/#F!2EQniYoZ!0Rhj15GN7nSRmrTFMC8smg (THANKs @Mikolaj612 and @velemas )
ROOT DIRECTORY (ON MEGA)
https://mega.nz/#F!aZAljazZ!zNLnLxH6flBxUsaTb167Jw
____________________________________
for F5122_34.3.A.0.217 - 7.1.1 - 8Aug2017 update
F5122 IS AT https://mega.nz/#F!iUB00abB!N7sDP1pv33ZCEC76j3RkYQ
F5121 .. AT https://mega.nz/#F!2FI0BI4B!f-wrWGTOzhgYX-_aLEBhBg ( THANK YOU @Mikolaj612 )
Code:
[SIZE="5"]
-if you don't have th 34.3 fsc script , i have included in the folder
-also i have inclused mixer_paths_wcd9335.xml, on 98% VOLUME level, IF you think sound output is LOW,,, just REPLACE it from /system/etc folder!
- :)
[/SIZE]
base directory
https://mega.nz/#F!aZAljazZ!zNLnLxH6flBxUsaTb167Jw
____________________________________________________
for F5122_34.3.A.0.206 - 7.1.1 - july2017 update
UPDATED KERNELS
F5121 IS AT https://mega.nz/#F!HcZmTIhR!0oCiMfh9uT-AdHp-bdSqZw (THANKS TO @velemas)
F5122 IS AT https://mega.nz/#F!fRBEVS5C!QjT-TgxZc9FYwAbh-F5IgA
Click to expand...
Click to collapse
Nice, Work on F5122
Where clean kernel for F5122?
Can't use the kcal
ReddFreedom said:
Where clean kernel for F5122?
Click to expand...
Click to collapse
updated, please check now
FuLiterary said:
Can't use the kcal
Click to expand...
Click to collapse
put supersu and kcal in sd card ( https://mega.nz/#F!aZAljazZ!zNLnLxH6flBxUsaTb167Jw) ( 7.x__417__Kcal_For-X_XZ_by_venkat-kamesh_SIGNED.zip)
AFTER FRESH FLASHING OF STOCK ROM, DON"T BOOT YOURDEVICE AND
1. flash twrp3.1 via adb (fastboot mode)
2. flash the clean kernel (with no supersu) via flash tool
3. boot in to recovery / twrp ,
4. flash kcal
5.flash supersu or magisk (whatever)
reboot NOW
the device will wakeup
1. rooted
2. having color modular in the app dock
YasuHamed said:
put supersu and kcal in sd card ( https://mega.nz/#F!aZAljazZ!zNLnLxH6flBxUsaTb167Jw) ( 7.x__417__Kcal_For-X_XZ_by_venkat-kamesh_SIGNED.zip)
AFTER FRESH FLASHING OF STOCK ROM, DON"T BOOT YOURDEVICE AND
1. flash twrp3.1 via adb (fastboot mode)
2. flash the clean kernel (with no supersu) via flash tool
3. boot in to recovery / twrp ,
4. flash kcal
5.flash supersu or magisk (whatever)
reboot NOW
the device will wakeup
1. rooted
2. having color modular in the app dock
Click to expand...
Click to collapse
i will try it.thanks
YasuHamed said:
updated, please check now
Click to expand...
Click to collapse
Thank you.
YasuHamed said:
put supersu and kcal in sd card ( https://mega.nz/#F!aZAljazZ!zNLnLxH6flBxUsaTb167Jw) ( 7.x__417__Kcal_For-X_XZ_by_venkat-kamesh_SIGNED.zip)
AFTER FRESH FLASHING OF STOCK ROM, DON"T BOOT YOURDEVICE AND
1. flash twrp3.1 via adb (fastboot mode)
2. flash the clean kernel (with no supersu) via flash tool
3. boot in to recovery / twrp ,
4. flash kcal
5.flash supersu or magisk (whatever)
reboot NOW
the device will wakeup
1. rooted
2. having color modular in the app dock
Click to expand...
Click to collapse
Have test it and can't use the kcal
(5. flash Magisk v.14)
BiaBertK said:
Have test it and can't use the kcal
(5. flash Magisk v.14)
Click to expand...
Click to collapse
now i am surprised!
how did you flash it? did u just install apk or flashed via twrp. its signed for X and XZ, and its working fine :s
YasuHamed said:
now i am surprised!
how did you flash it? did u just install apk or flashed via twrp. its signed for X and XZ, and its working fine :s
Click to expand...
Click to collapse
flashed via twrp!
This is how I proceeded:
(flashed via Windows 10 pro / 64bit ; Flashtool v.0.9.23.2 ; Minimal ADB and Fastboot v.1.4.2)
1. flash "F5121_34.3.A.0.228_1303-2543_R5D.ftf" via FlashTool
2. flash "twrp-3.1.1-suzu-2017.07.16.img" via adb
3. flash clean kernel "F5121_34.3.A.0.224_CLEAN_noTWRP_NOsuperSU" via FlashTool
4. boot to twrp
5. flash kcal "7.x__417__Kcal_For-X_XZ_by_venkat-kamesh_SIGNED.zip" in twrp
6. flash Magisk "Magisk-v14.0.zip" in twrp
7. Wipe Cache/Dalvik
8. reboot to System
Now I have the app "Color Control"
When I start the app I get the error
Do I make a mistake somewhere?
BiaBertK said:
flashed via twrp!
This is how I proceeded:
(flashed via Windows 10 pro / 64bit ; Flashtool v.0.9.23.2 ; Minimal ADB and Fastboot v.1.4.2)
1. flash "F5121_34.3.A.0.228_1303-2543_R5D.ftf" via FlashTool
2. flash "twrp-3.1.1-suzu-2017.07.16.img" via adb
3. flash clean kernel "F5121_34.3.A.0.224_CLEAN_noTWRP_NOsuperSU" via FlashTool
4. boot to twrp
5. flash kcal "7.x__417__Kcal_For-X_XZ_by_venkat-kamesh_SIGNED.zip" in twrp
6. flash Magisk "Magisk-v14.0.zip" in twrp
7. Wipe Cache/Dalvik
8. reboot to System
Now I have the app "Color Control"
When I start the app I get the error
Do I make a mistake somewhere?
Click to expand...
Click to collapse
it should work
Thank you!!!...it works
I tried with the 34.3.A.0.228 and works perfectly!!! :good:
I finally could ROOT my Xperia F5121 with this rooted kernel. Thank you for assistant!:laugh:
I'm on 34.3.A.0.217 rooted, how do i go about updating to this version?
Just use the system setting option to update then flash the rooted kernel? or just flash the rooted 224 kernel via recovery?
Does it work with OmniRom
this one: [ROM][Xperia X][SUZU][N][7.1.2][WEEKLY]OmniROM
Why even after a week I don't get this update??
gaurav_15 said:
Why even after a week I don't get this update??
Click to expand...
Click to collapse
It's late in India this time