Related
Stock zImage
Add features:
TWRP recovery 2.8.7.0 (vol down) (from @[NUT] dual recovery 2.8.21)
Over previous versions changed color LED to Violet and Blue to start and to use recovery
Init.d suport
RIC disabled
Debugging enabled by default
Disable debugging notification icon in the status bar
Kernel insecure (ro.secure=0)
Ramdisk totally new from 23.4.A.1.232
* Required Bootloader Unlocked!
* For D5803-D5833
* Installation:
Flash via recovery or via fastboot
* Please, do not mirror!
Download:
Advanced stock Kernel Z3C Lollipop 23.4.A.1.232
Enjoy and press the Thanks button if you like! :good:
.
It works fine on my D5803 :victory:
Very quick update, many many thanks! :good:
Thanks !
Works fine!
noobie question here, what does it do?
Thanks in advance
AlfredS said:
noobie question here, what does it do?
Thanks in advance
Click to expand...
Click to collapse
If you have an unlocked bootloader, you can flash this kernel through fastboot and you'll get a working recovery immediately.
Then you can root the system by flashing superSU from recovery.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, SafetyNet updates,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this TUTORIAL/GUIDE
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you a lot.
*/
This Tutorial/Guide is to install Magisk in Sony Xperia M4 Aqua. Tested in E2303
You need UNLOCKED BOOTLOADER and this TWRP (Download TWRP 3.2.1-0) (https://forum.xda-developers.com/m4-aqua/development/recovery-twrp-touch-recovery-3-1-1-0-t3636920).
Steps:
0.Remove any other root (SuperSU or Magisk) and Xposed. Make sure you have stock Sony Kernel.
1.Download BootBridge-Magisk-v14-M4A.zip
2.Boot TWRP (Volume DOWN + Power).
3.Flash BootBridge-Magisk-v14-M4A.zip
4.Reboot to system and update Magisk Manager (if needed)
5.Check "Preserve AVB 2.0/dm-verity", update to latest Magisk using "Direct Install", reboot and check SafetyNet.
6.(Optional) Install Systemless Xposed (don't forget Xposed Installer) and reboot. It takes 5 min to boot. (Android 6.0 = SDK 23) (https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268).
Systemless Xposed does not pass SafetyNet!!!
Thanks to:
@AdrianDC (BootBridge)
@dani020110 (TWRP for M4 Aqua)
@osmank3 (Steps to get Magisk v15.x working)
@topjohnwu (Magisk and Systemless Xposed Framework)
@rovo89 (Original Xposed Framework)
Google (Android)
Sony (Xperia M4 Aqua)
Me @YoshiX007 (Tutorial)
Old steps
Download Center
SuperSU: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Suhide: http://forum.xda-developers.com/apps/supersu/suhide-t3450396
Latest RootSwitch in first two posts (1.3.3.2 at writing time): https://www.asus.com/zentalk/tw/thread-173542-1-1.html
Minimal Fastboot: https://drive.google.com/file/d/0B7sssTaAqVsscWdRWVBaU05NWjA/view?usp=sharing Mirror: http://vlctv.webcindario.com/Xperia/MINIFASTBOOT.rar
Boot 26.3.A.0.131
Boot for E2303 (rename it to boot.img): https://goo.gl/PBXtNe
Boot for E2306 (rename it to boot.img): https://goo.gl/8sKHZ1
Boot for E2312 (rename it to boot.img): https://goo.gl/XYeqe2
Boot for E2333 AND E2363 (rename it to boot.img): https://goo.gl/ZzHOhL
Boot for E2353 (rename it to boot.img): https://goo.gl/IZRzKM
Boot 26.3.A.1.33
Boot for E2303 (rename it to boot.img): https://goo.gl/mVuWcu
Boot for E2306 (rename it to boot.img): https://goo.gl/2Z3NuK
Boot for E2312 (rename it to boot.img): https://goo.gl/6H9fiV
Boot for E2333 (rename it to boot.img): https://goo.gl/fhdVVW
Boot for E2353 (rename it to boot.img): https://goo.gl/8atYQm
Boot for E2363 (rename it to boot.img): https://goo.gl/ZsUupP
(OPTIONAL) If you want xposed
Material Design Xposed Installer: http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
Xposed Framework 86.2 CheckMod https://drive.google.com/file/d/0B7sssTaAqVssc05GTVl1enJQb1U/view?usp=sharing
This Tutorial/Guide is for root and install Xposed in Sony Xperia M4 Aqua :highfive:
You need UNLOCKED BOOTLOADER.
Tested only in E2303 26.3.A.1.33 with Xposed installed, you need UNLOCKED BOOTLOADER.
It is easy
Resumed steps:
0.(If you have Magisk installed or you used this tuto before the update) Flash Magisk Uninstaller to get a clean start and flash latest Sony stock ROM.
1.Download needed files : your boot.img, minifastboot, (optional(xposed, xposed installer)) ,SuperSU and RootSwitch (Search in download center)
2.Flash your corresponding boot from Download Center and Start TWRP with volume UP (YES UP, NO DOWN).
3.1 Flash SuperSU ZIP.
3.2 Flash Suhide ZIP
4.1 Reboot and install RootSwitch 1.2.4
4.2 Reboot, disable root in RootSwitch and check SafetyNet.
5. Go away and play PoGO.
(Optional)
6. Go TWRP, clean dalvik/art cache, flash Xposed ZIP and install DVDandroid's Material Design Xposed Installer.
Explained Steps:
0.(If you have Magisk installed or you used this tuto before the update) Flash Magisk Uninstaller to get a clean start and flash latest Sony stock ROM.
1.Download (Search in download center) and copy:
TO PC:
MiniFastboot, (Search in download center)
To MINIFASTBOOT folder:
Your boot.img from download center
TO ExtSD:
SuperSU and RootSwitch. (Xposed Framework, Material Design Xposed Installer)
2.1. Flash boot (fastboot):
Code:
Go to MINIFASTBOOT folder and boot into fastboot mode, type in the shell:
fastboot devices
fastboot flash boot boot.img
fastboot reboot
2.2 Start TWRP Recovery: WITH VOLUME UP
Code:
2.2.1 Power off
2.2.2 Power on
2.2.3 When the yellow led lights and press volume UP and wait
3. Install ZIPs
Code:
3.1 Install SuperSU+Suhide
3.2 Reboot system
(It is going to take some time)
4.1 Install RootSwitch
4.2 Reboot, check "Stop all su daemons", disable root in RootSwitch and check SafetyNet.
(Optional) 4.3 Go TWRP, clean dalvik/art cache, flash Xposed ZIP and install DVDandroid's Material Design Xposed Installer.
5 ??????????
6. :victoryrofit!!!!!!!!:victory:
Thanks to:
@99poison victory:advise about every update :good
shakalaca from Asus Developer Club (RootSwitch)
@Chainfire (SuperSU, Suhide, Systemless Root...)
@osm0sis (Android Image Kitchen)
@DVDandroid (Material Design Xposed Installer)
@PiSpecialist (Base boot.img)
@topjohnwu (Systemless Xposed Framework)
Sony (Xperia M4 Aqua)
Google (Android,ADB and Fastboot)
Me @YoshiX007 (Tutorial and remodded kernels)
Little FAQ, Changelog (very very simple) + Attached screenshot
FAQ
Q:Sony updated firmware
A:Update via FlashTool and follow from step 1.
Q:It is in bootloop (After Magisk install)
A:Flash stock boot with FlashTool and try again.
Q:It is in bootloop (After Xposed install)
A:If it dures more than 10 min, force a reboot. If doesn't work, clean dalvik cache in TWRP.
Q:I have a 0 folder in internal storage
Ao NOT erase it and reboot.
Q:SafetyNet doesn't pass
A:Make sure Xposed is not enabled/installed and Magisk is updated.
Q:It isn't here
A:Ask here
v1 19-Sep_19-09_>
First tuto ------>_/
v2 10-Oct_10/10 ______________>
Update tuto and boot.img ------>_/
v3 11-Oct_11/10________________________________________________ _____________>
Add a screenshot, fix problems, erase warning as suhide is updated and and Magisk is not more necessary.----->_/
v4 14-Oct_14/10________________________________________________ ________>
Change root method, remove xposed in tuto and add resumed steps.------------------------->
v5 17-Oct_17/10________________________________________________ ________>
Change root method, add xposed in tuto and add an F.A.Q.------------------------------------->
v6 24-Oct_24/10________________________________________________ ________>
Fix some typos, rewrite title, new kernels and reorder steps-------------------------------------->
v7 26-Oct_26/10________________________________________________ ________>
Minor edits,update RootSwitch link (thanks @99poison) and change to goo.gl links--------------------------------->
v8 02-Jan_02/01________________________________________________>
Complete rework and method updated (HAPPY 2018!!)------------------------------ >
After installation, I get a message that the su binary files are out of date
In Magisk I have a phone that is a non-rooted (switches are locked), and there is installed frameworks Xposed
How to fix it ?
I have Xpeira M4 Aqua E2303
EDIT : ALL WORKS Thanks Bro
sorry, what mean android pay for it? i can't understand
Android Pay is a payment system based on NFC https://www.android.com/pay/
It is available in USA,UK,Singapore and Australia.
Thank you for your post! My son has a E2303 now with installed [Rom][6.0.1][e23xx][UB]prerooted stock xperia m4 aqua. But he can't use pokemon witch he kind of demands . Well so as the father that I am I have promised him I would look in to it. Well what do we need to do to get back to Sony stock ROM. I could only find FTF files for 5.0, and also I dont have a windows computer, only linux. Is there any .zip files with the original system on that kan be flashed thru twrp?
Ex
Use XperiFirm to download MM rom and flash it via FlashTool. It has CDA 1293-7731/Customised CH/26.3.A.0.131.
Enter the following lines once per computer:
$ sudo apt-get install mono-complete
$ sudo cert-sync /etc/ssl/certs/ca-certificates.crt
$ sudo certmgr -ssl -m https://software.sonymobile.com
(Enter Y when asked, you should be asked to do so twice)
Enter the following line to launch XperiFirm:
$ mono XperiFirm.exe
Click to expand...
Click to collapse
Can't install phh's root or xposed on E2306. Flashing goes fine, but magisk manager says they are not installed.
EDIT: I was using with DOWN twrp instead of UP, now everything works.
MrOrry said:
Can't install phh's root or xposed on E2306. Flashing goes fine, but magisk manager says they are not installed.
Click to expand...
Click to collapse
When you are in TWRP can you find bootlog-magisk.txt or fstab.kanuti in the File Explorer?
YoshiX007 said:
When you are in TWRP can you find bootlog-magisk.txt or fstab.kanuti in the File Explorer?
Click to expand...
Click to collapse
I can see the fstab.kanuti but not the magisk one. Eventhough in teh cache folder I see some magisk.log files. Also since I tried to use the e2303 boot image I am having LTE speed problems, I tried to fix it by flashing stock images and the boot image for e2306 In this post.
You are in wrong recovery (both are TWRP).
1.Turn off your phone
2.Turn it on
3.When you can see a yellow led press volume UP button and find bootlog-magisk.txt
PD: It is in / folder
Work fine on E2363 , boot take almost 20 minutes here but no problem after that , thank you
Not working on My E2312. I flashed to stock ftf file and installed recovery and flashed boot.img. And then, I did Wipe cache and dalvik, flashed Magisk Zip, phh's SuperUser ZIP and xposed systemless zips. Flashing is fine and seem no error. After install Magisk Manager APK and phh's SuperUser apk, I opened Magisk Manager apk and it displayed Boot version: Magisk v6, Root Status : Unrooted, selinux status: Enforcing and can't use root toggle. Please help me!
YoshiX007 said:
You are in wrong recovery (both are TWRP).
1.Turn off your phone
2.Turn it on
3.When you can see a yellow led press volume UP button and find bootlog-magisk.txt
PD: It is in / folder
Click to expand...
Click to collapse
Oh. I can't belive how I missed it, now magisk, xposed and root mounting works. Thank you!
How's the performance? And will you be posting any (frequent maybe?) updates (OTA)
@99poison Can you try this boot? https://drive.google.com/file/d/0B7sssTaAqVssd0cxUUpXc2JZV28/view?usp=sharing @JakeMini123 Performace should be like PiSpecialist's root boot.img. About OTAs I can't understand you but all magisk updates should work.
YoshiX007 said:
@99poison Can you try this boot? https://drive.google.com/file/d/0B7sssTaAqVssd0cxUUpXc2JZV28/view?usp=sharing @JakeMini123 Performace should be like PiSpecialist's root boot.img. About OTAs I can't understand you but all magisk updates should work.
Click to expand...
Click to collapse
Finally, it working for me. Problem is TWRP recovery ( I entered wrong twrp by pressing volume down + power button).
Problem solve >> I flashed your modified boot.img and Power off phone. To enter your twrp recovery, when Power on, I pressed volume up button when light is yellow color and I did your procedures. Now, my phone is system-less and root is also OK.
Thank you so much,
99poison
BTW, Pokemon working only when Xposed system-less is disabled otherwise it can't work with Magisk.
i cannot enter to the fastboot mode in the e2306. could you explain me how could I do it? I tried to flash magisk with the traditional TWRP, but my phone doesn't start, so I had to repair it using sony companion.
Try to flash your boot.img via FOTA-TWRP(normal recovery).
First put Magisk-E2306.img in your EXTERNAL SD.
When you are in TWRP main menu, go to Install, select Install Image, go to your external sd, press Magisk-E2306.img, select Flash BOOT and reboot
THIS POST IS EXTENSION TO
https://forum.xda-developers.com/xp...t-xperia-x-f5122-android-n-34-2-2-47-t3594502
and
https://forum.xda-developers.com/xperia-x/development/root-xperia-x-f512234-3-0-206-7-1-1-t3635595
please read carefully and flash kernel for the LATEST UPDATE (Project SUZU )
for F5122_34.3.A.0.224 - 7.1.1 - 8 SEPTEMBER 2017 update
F5122 IS AT https://mega.nz/#F!GFo1EArZ!ngb5WsZJtbmFwXk_ImN-TA
F5121 .. https://mega.nz/#F!2EQniYoZ!0Rhj15GN7nSRmrTFMC8smg (THANKs @Mikolaj612 and @velemas )
-if you don't have th 34.3 fsc script , i have included in the folder (closing Partitions takes TIME, so be Patient ! )
-also i have inclused mixer_paths_wcd9335.xml, on 98% VOLUME level, IF you think sound output is LOW,,, just REPLACE it from /system/etc folder!
-
.
.
Click to expand...
Click to collapse
ROOT DIRECTORY (ON MEGA)
https://mega.nz/#F!aZAljazZ!zNLnLxH6flBxUsaTb167Jw
____________________________________
for F5122_34.3.A.0.217 - 7.1.1 - 8Aug2017 update
F5122 IS AT https://mega.nz/#F!iUB00abB!N7sDP1pv33ZCEC76j3RkYQ
F5121 .. AT https://mega.nz/#F!2FI0BI4B!f-wrWGTOzhgYX-_aLEBhBg ( THANK YOU @Mikolaj612 )
Code:
[SIZE="5"]
-if you don't have th 34.3 fsc script , i have included in the folder
-also i have inclused mixer_paths_wcd9335.xml, on 98% VOLUME level, IF you think sound output is LOW,,, just REPLACE it from /system/etc folder!
- :)
[/SIZE]
base directory
https://mega.nz/#F!aZAljazZ!zNLnLxH6flBxUsaTb167Jw
____________________________________________________
for F5122_34.3.A.0.206 - 7.1.1 - july2017 update
UPDATED KERNELS
F5121 IS AT https://mega.nz/#F!HcZmTIhR!0oCiMfh9uT-AdHp-bdSqZw (THANKS TO @velemas)
F5122 IS AT https://mega.nz/#F!fRBEVS5C!QjT-TgxZc9FYwAbh-F5IgA
F5121 here:
Code:
http://www100.zippyshare.com/v/gcX0M8iD/file.html
Mikolaj612 said:
F5121 here:
Code:
http://www100.zippyshare.com/v/gcX0M8iD/file.html
Click to expand...
Click to collapse
thank you,
link updated in the OT
have a great day!
I am using the same kernel which i have put on the cloud, f5122
however updatin to .224 via flashtool via win7pro took LONGER than usual time! , TA Partition Headers weren't closing! and eventually froze!
softBricked device twice! , then flashed via Windows 10 / 64bit from different machine!
however! please note!
the kernels are already rooted!
after FLASHING xperia X, if you DONT boot, and FLASH RECOVERY twrp3.1, via adb, adn boot X by pressing power+volumeDOWN key until PINK LED, you can FLASH kcal module! (which should be in your sd card, or use otg cable)
with Kcal you can use your device in gray scale - and it will extend your battery life to amazing level! since X has poor battery!
remember! if you have booted your X into system , the twrp will give PASSWORD error while accessing internal storage! because SONY encrypts storage on its VERY FIRST BOOT when you CLEAN FLASH STOCK ROM using FLASHTOOL!
YasuHamed said:
THIS POST IS EXTENSION TO
https://forum.xda-developers.com/xp...t-xperia-x-f5122-android-n-34-2-2-47-t3594502
and
https://forum.xda-developers.com/xperia-x/development/root-xperia-x-f512234-3-0-206-7-1-1-t3635595
please read carefully and flash kernel for the LATEST UPDATE (Project SUZU )
for F5122_34.3.A.0.224 - 7.1.1 - 8 SEPTEMBER 2017 update
F5122 IS AT https://mega.nz/#F!GFo1EArZ!ngb5WsZJtbmFwXk_ImN-TA
F5121 .. https://mega.nz/#F!2EQniYoZ!0Rhj15GN7nSRmrTFMC8smg (THANKs @Mikolaj612 and @velemas )
ROOT DIRECTORY (ON MEGA)
https://mega.nz/#F!aZAljazZ!zNLnLxH6flBxUsaTb167Jw
____________________________________
for F5122_34.3.A.0.217 - 7.1.1 - 8Aug2017 update
F5122 IS AT https://mega.nz/#F!iUB00abB!N7sDP1pv33ZCEC76j3RkYQ
F5121 .. AT https://mega.nz/#F!2FI0BI4B!f-wrWGTOzhgYX-_aLEBhBg ( THANK YOU @Mikolaj612 )
Code:
[SIZE="5"]
-if you don't have th 34.3 fsc script , i have included in the folder
-also i have inclused mixer_paths_wcd9335.xml, on 98% VOLUME level, IF you think sound output is LOW,,, just REPLACE it from /system/etc folder!
- :)
[/SIZE]
base directory
https://mega.nz/#F!aZAljazZ!zNLnLxH6flBxUsaTb167Jw
____________________________________________________
for F5122_34.3.A.0.206 - 7.1.1 - july2017 update
UPDATED KERNELS
F5121 IS AT https://mega.nz/#F!HcZmTIhR!0oCiMfh9uT-AdHp-bdSqZw (THANKS TO @velemas)
F5122 IS AT https://mega.nz/#F!fRBEVS5C!QjT-TgxZc9FYwAbh-F5IgA
Click to expand...
Click to collapse
Nice, Work on F5122
Where clean kernel for F5122?
Can't use the kcal
ReddFreedom said:
Where clean kernel for F5122?
Click to expand...
Click to collapse
updated, please check now
FuLiterary said:
Can't use the kcal
Click to expand...
Click to collapse
put supersu and kcal in sd card ( https://mega.nz/#F!aZAljazZ!zNLnLxH6flBxUsaTb167Jw) ( 7.x__417__Kcal_For-X_XZ_by_venkat-kamesh_SIGNED.zip)
AFTER FRESH FLASHING OF STOCK ROM, DON"T BOOT YOURDEVICE AND
1. flash twrp3.1 via adb (fastboot mode)
2. flash the clean kernel (with no supersu) via flash tool
3. boot in to recovery / twrp ,
4. flash kcal
5.flash supersu or magisk (whatever)
reboot NOW
the device will wakeup
1. rooted
2. having color modular in the app dock
YasuHamed said:
put supersu and kcal in sd card ( https://mega.nz/#F!aZAljazZ!zNLnLxH6flBxUsaTb167Jw) ( 7.x__417__Kcal_For-X_XZ_by_venkat-kamesh_SIGNED.zip)
AFTER FRESH FLASHING OF STOCK ROM, DON"T BOOT YOURDEVICE AND
1. flash twrp3.1 via adb (fastboot mode)
2. flash the clean kernel (with no supersu) via flash tool
3. boot in to recovery / twrp ,
4. flash kcal
5.flash supersu or magisk (whatever)
reboot NOW
the device will wakeup
1. rooted
2. having color modular in the app dock
Click to expand...
Click to collapse
i will try it.thanks
YasuHamed said:
updated, please check now
Click to expand...
Click to collapse
Thank you.
YasuHamed said:
put supersu and kcal in sd card ( https://mega.nz/#F!aZAljazZ!zNLnLxH6flBxUsaTb167Jw) ( 7.x__417__Kcal_For-X_XZ_by_venkat-kamesh_SIGNED.zip)
AFTER FRESH FLASHING OF STOCK ROM, DON"T BOOT YOURDEVICE AND
1. flash twrp3.1 via adb (fastboot mode)
2. flash the clean kernel (with no supersu) via flash tool
3. boot in to recovery / twrp ,
4. flash kcal
5.flash supersu or magisk (whatever)
reboot NOW
the device will wakeup
1. rooted
2. having color modular in the app dock
Click to expand...
Click to collapse
Have test it and can't use the kcal
(5. flash Magisk v.14)
BiaBertK said:
Have test it and can't use the kcal
(5. flash Magisk v.14)
Click to expand...
Click to collapse
now i am surprised!
how did you flash it? did u just install apk or flashed via twrp. its signed for X and XZ, and its working fine :s
YasuHamed said:
now i am surprised!
how did you flash it? did u just install apk or flashed via twrp. its signed for X and XZ, and its working fine :s
Click to expand...
Click to collapse
flashed via twrp!
This is how I proceeded:
(flashed via Windows 10 pro / 64bit ; Flashtool v.0.9.23.2 ; Minimal ADB and Fastboot v.1.4.2)
1. flash "F5121_34.3.A.0.228_1303-2543_R5D.ftf" via FlashTool
2. flash "twrp-3.1.1-suzu-2017.07.16.img" via adb
3. flash clean kernel "F5121_34.3.A.0.224_CLEAN_noTWRP_NOsuperSU" via FlashTool
4. boot to twrp
5. flash kcal "7.x__417__Kcal_For-X_XZ_by_venkat-kamesh_SIGNED.zip" in twrp
6. flash Magisk "Magisk-v14.0.zip" in twrp
7. Wipe Cache/Dalvik
8. reboot to System
Now I have the app "Color Control"
When I start the app I get the error
Do I make a mistake somewhere?
BiaBertK said:
flashed via twrp!
This is how I proceeded:
(flashed via Windows 10 pro / 64bit ; Flashtool v.0.9.23.2 ; Minimal ADB and Fastboot v.1.4.2)
1. flash "F5121_34.3.A.0.228_1303-2543_R5D.ftf" via FlashTool
2. flash "twrp-3.1.1-suzu-2017.07.16.img" via adb
3. flash clean kernel "F5121_34.3.A.0.224_CLEAN_noTWRP_NOsuperSU" via FlashTool
4. boot to twrp
5. flash kcal "7.x__417__Kcal_For-X_XZ_by_venkat-kamesh_SIGNED.zip" in twrp
6. flash Magisk "Magisk-v14.0.zip" in twrp
7. Wipe Cache/Dalvik
8. reboot to System
Now I have the app "Color Control"
When I start the app I get the error
Do I make a mistake somewhere?
Click to expand...
Click to collapse
it should work
Thank you!!!...it works
I tried with the 34.3.A.0.228 and works perfectly!!! :good:
I finally could ROOT my Xperia F5121 with this rooted kernel. Thank you for assistant!:laugh:
I'm on 34.3.A.0.217 rooted, how do i go about updating to this version?
Just use the system setting option to update then flash the rooted kernel? or just flash the rooted 224 kernel via recovery?
Does it work with OmniRom
this one: [ROM][Xperia X][SUZU][N][7.1.2][WEEKLY]OmniROM
Why even after a week I don't get this update??
gaurav_15 said:
Why even after a week I don't get this update??
Click to expand...
Click to collapse
It's late in India this time
I'm a noob, excuse me if this is a stupid question
its not a stupid question but an obvious one
since you are new I will write cliff note steps in order for you to understand better
1. unlocking bootloader (needs miui permission 72 hours waiting time (it can be more) ~ verifying Sim to Miui account ~ enabling oem unlock under developer options
2. flashing Twrp ! ( you need Minimal Adb & fastboot 1.4.2 ~ in order to either BOOT temporarily in twrp (recovery) or flash Recovery to POCO
3. booting in to twrp (power+ VolumeUP button ~! hold until you see Twrp logo)
4. assuming you are in MIUI10, flash magisk19.3.zip, Magisk not only root your device, infact in order to do so, it will first disable dm-verity!
5. now device is rooted
HOWEVER!!!
if this is NOT WHAT YOU ARE ASKING
then there is a file called Lazyflasher.zip , if you flash this in twrp, it should disable dm-verity
more ?
use AIK (kitchen) or Super Kitchen to EXTRACT the kernel image in to differen files and alter settings in fstab and/or ramdisk and REPACK your kernel again in to .img file
YasuHamed said:
its not a stupid question but an obvious one
since you are new I will write cliff note steps in order for you to understand better
1. unlocking bootloader (needs miui permission 72 hours waiting time (it can be more) ~ verifying Sim to Miui account ~ enabling oem unlock under developer options
2. flashing Twrp ! ( you need Minimal Adb & fastboot 1.4.2 ~ in order to either BOOT temporarily in twrp (recovery) or flash Recovery to POCO
3. booting in to twrp (power+ VolumeUP button ~! hold until you see Twrp logo)
4. assuming you are in MIUI10, flash magisk19.3.zip, Magisk not only root your device, infact in order to do so, it will first disable dm-verity!
5. now device is rooted
HOWEVER!!!
if this is NOT WHAT YOU ARE ASKING
then there is a file called Lazyflasher.zip , if you flash this in twrp, it should disable dm-verity
more ?
use AIK (kitchen) or Super Kitchen to EXTRACT the kernel image in to differen files and alter settings in fstab and/or ramdisk and REPACK your kernel again in to .img file
Click to expand...
Click to collapse
thanks for replying. so by flashing magisk I'm disabling dm-verity on the kernel, right? again thanks for helping me out
Ashiq.makkar said:
thanks for replying. so by flashing magisk I'm disabling dm-verity on the kernel, right? again thanks for helping me out
Click to expand...
Click to collapse
Ashiq.makkar said:
thanks for replying. so by flashing magisk I'm disabling dm-verity on the kernel, right? again thanks for helping me out
Click to expand...
Click to collapse
yes i am on poco f1 using custom rom
in twrp
1. flash vendor firmware https://mirror.akhilnarang.me/MIUI/beryllium/beryllium-9.6.27-9.0-vendor-firmware.zip
2. flash the custom rom
3. flash GAPPS ( opengapps.org) take ARM64>9.0>Micro package
4. i flash Optimus Drunk kernel 26aug19.zip (optional)
5. MAGISK19.3.zip flashable
6. clean delvik/cache and REBOOT
however if you are in MIUI10 just perform step 5&6
first REBOOT may go in to BOOTLOOP but eventually MIUI10 will boot.
HOWEVER ALWAYS TAKE BACKUP!
YasuHamed said:
yes i am on poco f1 using custom rom
in twrp
1. flash vendor firmware https://mirror.akhilnarang.me/MIUI/beryllium/beryllium-9.6.27-9.0-vendor-firmware.zip
2. flash the custom rom
3. flash GAPPS ( opengapps.org) take ARM64>9.0>Micro package
4. i flash Optimus Drunk kernel 26aug19.zip (optional)
5. MAGISK19.3.zip flashable
6. clean delvik/cache and REBOOT
however if you are in MIUI10 just perform step 5&6
first REBOOT may go in to BOOTLOOP but eventually MIUI10 will boot.
HOWEVER ALWAYS TAKE BACKUP!
Click to expand...
Click to collapse
thank u so much.did exactly what u said.and everything works fine
TWRP is an open source, community project. A custom recovery is used for installing custom software on your device. This TWRP has included Magisk. After a long wait, Finally, A50s can be rooted without bootloop issue using Kernel Mod. Kernel Mod based on Quantum Kernel v.1.1, edited by halcyon441 to make it works on A50s for fixing bootloop.
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Installing TWRP and Rooting may void warranty. We are here just try to help you, don't be stupid and don't blame us if you make mistake
Downloads
TWRP_3.4.0.0_A50s_Magisk.tar
QuantumKernelv1.50_A50sxx.zip
Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Copy these 2 files to micro SD Card ( Quantumkernel and disable dm_verity )
Install TWRP and Rooting instructions:
1. Make sure the bootloader is unlocked, OEM unlock option is grey out
2. Enter Download Mod
3. Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
4. Flashing TWRP_3.4.0.0_A50s_Magisk.tar as AP in ODIN ( uncheck "Auto Reboot" )
5. Enter TWRP Recovery for first time: Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
6. Install QuantumKernelv1.50_A50sxx.zip
8. Select Wipe -> Format data.
9. Install Disable_Dm-Verity_ForceEncrypt_01.14.2020.zip
10. Select Reboot to Recovery
11. Install Magisk Manager
12. Done!
For detail instructions WATCH THIS VIDEO
Contributors
halcyon441 and redymedan
Source Code TWRP : https://github.com/halcyon441-png/twrp_samsung_a50sxx
Source Code Kernel: https://github.com/halcyon441-png/android_samsung_exynos9610/releases/tag/v1.5
Created 2020-06-08
Updated 2020-07-23
First ?
great thanks mate, @redymedan & @halcyon441
After rooting, phone restart unroot again,, how to fix?
rockadz9 said:
After rooting, phone restart unroot again,, how to fix?
Click to expand...
Click to collapse
enter TWRP recovery then select Reboot to Recovery, each time you restart the phone normally, it will unroot it.
You can join to telegram group https://t.me/androidhowto2020
̶h̶e̶y̶ ̶@redymedan,̶ ̶d̶i̶d̶ ̶y̶o̶u̶ ̶c̶h̶e̶c̶k̶ ̶t̶h̶e̶ ̶c̶a̶m̶e̶r̶a̶?̶
̶i̶s̶ ̶i̶t̶ ̶w̶o̶r̶k̶i̶n̶g̶ ̶o̶r̶ ̶n̶o̶t̶?̶ ̶b̶e̶c̶a̶u̶s̶e̶ ̶m̶y̶ ̶c̶a̶m̶e̶r̶a̶ ̶i̶s̶n̶'̶t̶ ̶w̶o̶r̶k̶i̶n̶g̶ ̶a̶f̶t̶e̶r̶ ̶i̶ ̶f̶l̶a̶s̶h̶ ̶t̶h̶a̶t̶ ̶k̶e̶r̶n̶e̶l̶
[Edit]
My bad, turns out i was flashing the zip from A50, not the edited custom kernel from @redymedan gdrive
change to source code link to this please.
halcyon441 said:
change to source code link to this please.
Click to expand...
Click to collapse
Done!
Any chance for permanent root which persist after reboot?
Mikolaj.Q said:
Any chance for permanent root which persist after reboot?
Click to expand...
Click to collapse
You can try Smali Patcher and thick/select only "recovery reboot".
Did this working with SM-A5070
ba_alwy said:
Did this working with SM-A5070
Click to expand...
Click to collapse
not tested
Can I flash the the tar file without the magisk suffix and flash the latest magisk zip file?
If not, how can I make root persist after reboot with smalli patcher?
I tested and not working with A5070
The only thing it's root with magisk and the phone keep reset
Hi, tried doing this on my SM-A507FN/DS, couldnt flash TWRP, it said only official binaries can be flashed in download mode. Any solution @redymedan ?
muhsin_Sultan said:
Hi, tried doing this on my SM-A507FN/DS, couldnt flash TWRP, it said only official binaries can be flashed in download mode. Any solution @redymedan ?
Click to expand...
Click to collapse
You must unlock the bootloader, you get the error message because the bootloader are locked.
Watch this video how to unlock it Unlock Bootloader https://youtu.be/8j6WkOOA3f4
redymedan said:
You must unlock the bootloader, you get the error message because the bootloader are locked.
Watch this video how to unlock it Unlock Bootloader https://youtu.be/8j6WkOOA3f4
Click to expand...
Click to collapse
I already unlocked the bootloader. If you do it from a locked bootloader it would say not allowed due to oem lock. But I already unlocked it. I saw another thread where say to flash the AP file with Magisk then flash everything in odin except replace AP with the magisk patched one. Will that work @redymedan
Update TWRP 3.4.0.0 and Quantum Kernel v1.50
Thanks to halcyon441 for the Good Jobs :good:
sm-5070
hello,
I tested with a A50s SM-5070. TWRP is well flashed, but the phone doesn't want to reboot in recovery.
Then i flashed the stock ROM
On which version of A50s is it tested ?