[ROM][Official Beta][7D-503L & 7D-501u][Lollipop 5.1.1][EMUI 3.1][C208B011SP05/SP06]
Huawei has officially started its lollipop upgrade program for MediaPad X1 (7D-503L & 7D-501u) by pushing the first OTA updates to beta testers.
If you are not one of them but would still like to give it a swirl, ROM files and update instructions as below.
Flashing method is standard huawei procedures other than u will need to flash 2 files this time round, the first serves to re-partition the internal memory to accommodate lollipop.
The usual 'be careful, do it at your own risks' caveats apply, do take note that everything on the phone's internal memory (the 16GB part) will be wiped, your microSD card will not be affected though.
Have fun!
Not working:
1) Please note MHL (HDMI) function is not available in this ROM, if you require this function, do not update.
2) Xposed Framework is also a no go on EMUI 3.1 without modding, if u really must try, remember to have the uninstaller (flashable zip) ready in your microSD card, u will need that when you run into a X1 that fails to boot
(Huawei's default per app 320/400 dpi setting is working fine, thus non working Xposed is non consequential if u only need it for this purpose)
Steps:
1) Ensure your X1 (501u and 503L) is on the latest official (non-rooted) EMUI 3.0 B011 ROM, if not, kindly update to it
7D-501u - http://emuirom123.dbankcloud.com/7D-501u_EMUI3.0_Android4.4_V100R002C208B011.zip?rid=1141
7D-503L - http://emuirom123.dbankcloud.com/7D-503L_EMUI3.0_Android4.4_V100R002C208B011.zip?rid=1142
Clear cache and reset to factory settings before you flash the Beta 5.1.1 below.
2) Download the 2 necessary ROM files (the smaller 30+MB one is an update for modem / radio / kernel and also for re-partitioning etc; the larger near 1GB file is the ROM proper)
7D-503L
http://www.mediafire.com/download/9ea7yb206d869ya/7D-503LV100R002C208B011SP05.zip
http://www.mediafire.com/download/7o9g94z8c756ijs/7D-503LV100R002C208B011SP05_Main.zip
7D-501u
http://www.mediafire.com/download/pfp85guitv71745/7D-501uV100R002C208B011SP06.zip
http://www.mediafire.com/download/dld8lxrewj288tm/7D-501uV100R002C208B011SP06_Main.zip
3) At the root of your microSD card, create a folder and name it 'dload', rename the 30+MB file to 'update.zip' and copy that into 'dload' folder
4) Go to 'Settings', 'Updater', 'Menu' and 'Local update'. Choose the (only) update available and perform the update.
5) Phone will reboot and update will run, when you see a big tick, eject the microSD card and the phone will reboot again (if it doesn't, simply long press the power button to force shut and restart it).
6) After the phone has rebooted, re-insert the microSD, navigate to 'dload' folder and erase the update.zip file
7) Unzip the near 1GB ROM file and copy the update.app file into 'dload' folder
8) Download unlmt.rar file below and copy the 0 byte cfg file into the dload folder
9) repeat above steps 4) to 6) (delete update.app instead at step 6)**
** If you are prompted for a PIN code when the phone reboots after a flash, fret not, simply force shut it by long pressing the power button, then enter Recovery by pressing the vol+ & power button simultaneously, and choose to clear cache. The PIN code request will be gone when the phone reboots
Google Play Store and Calendar / Contacts Sync
10) Your X1 should now be on 5.1.1, download and install the 3 google apk files below to get Play Store and Calendar / Contacts Sync.
(Good news here is the whole google framework already exists in the ROM, therefore there is no need to mess with root to do that)
Root
To obtain root access on this ROM, use the latest Wondershare MobileGo one click root (Win) program - thanks to jonjong http://forum.xda-developers.com/showpost.php?p=63397619&postcount=34 - to root it.
There is also another 'cleaner' method of flashing custom CWM recovery and then chainfire's update.zip, but this will involve unlocked bootloader and some knowledge or ability to read chinese, will find some time to include a detailed write-up if there is demand for it. For now, you can download the necessary below:
http://www.mediafire.com/download/i564vr6587r2ma8/X1_5.1.1_Root.rar
Both methods need an unlocked bootloader AFAIK. If u come from B011, the bootloader should already have been unlocked.
If your X1 is 501L, you can unlock your bootloader by flashing the latest B102 ROM (EMUI3.0 / KK 4.4.2 / International / GAPPS) released by Huawei Germany - thanks to super_sonic http://forum.xda-developers.com/showpost.php?p=63420650&postcount=50
B102 download: http://www.mediafire.com/download/i...iaPad_X1_SDCard_Update_Android_4.4.2_B102.zip
Do note that if you do a factory reset after updating to 5.1.1 or re-flash 5.1.1 within 5.1.1, there is a chance that the bootloader will be re-locked.
Your mileage may vary.
Good luck
what about 501u ??
Great! Finally! Waiting for 501U
How is the performance guys. Is it snappier or the same lags?
Thank you very much, have been waiting for this since August as promised by Huawei. I don't want to stuck at kitkat (B011).
---------- Post added at 01:36 PM ---------- Previous post was at 01:33 PM ----------
With my 2 cents, you can use this rom on 501u with 4G switch off.
I dont understand,i have done everything right,but still its 4.4.2 and not 5.1.1.
And it doesnt recognize which version i have!!
When it boots it says android,and it doesnt have the Honor X1 logo.
drake19 said:
I dont understand,i have done everything right,but still its 4.4.2 and not 5.1.1.
And it doesnt recognize which version i have!!
When it boots it says android,and it doesnt have the Honor X1 logo.
Click to expand...
Click to collapse
reset the phone to factory settings, clear cache and re-flash.
hope it helps.
potatohead said:
reset the phone to factory settings, clear cache and re-flash.
hope it helps.
Click to expand...
Click to collapse
I have reset the phone,cleared cache but it does not re-flash the rom,it says something in chinese and it has and explanion mark.
When i flashed the first small update,in system info,it was saying that is B011SP5 but it wasnt 5.1.1.
drake19 said:
I have reset the phone,cleared cache but it does not re-flash the rom,it says something in chinese and it has and explanion mark.
When i flashed the first small update,in system info,it was saying that is B011SP5 but it wasnt 5.1.1.
Click to expand...
Click to collapse
have u tried flashing the big file it in recovery?
if still not working, download and unzip the attached file, put the unzipped 0 byte cfg file together with update.app in dload folder, reboot the phone and see if it auto flashes, if it does, hope it flashes as per normal.
if it doesn't, restart in recovery and tried flashing it again.
potatohead said:
have u tried flashing the big file it in recovery?
if still not working, download and unzip the attached file, put the unzipped 0 byte cfg file together with update.app in dload folder, reboot the phone and see if it auto flashes, if it does, hope it flashes as per normal.
if it doesn't, restart in recovery and tried flashing it again.
Click to expand...
Click to collapse
It flashes the rom but its the same,old android logo on boot and it thinks that it have 4.4.2 not 5.1.1.
Mine X1 it came with european rom 7D-501L but on the box the model is 7D-503L,i flashed the 4.4.2 with the product flag.
drake19 said:
It flashes the rom but its the same,old android logo on boot and it thinks that it have 4.4.2 not 5.1.1.
Mine X1 it came with european rom 7D-501L but on the box the model is 7D-503L,i flashed the 4.4.2 with the product flag.
Click to expand...
Click to collapse
1st try also same problem as yours, I tried with dload contain only update.app then successful. Hope this will help.
jonjong said:
1st try also same problem as yours, I tried with dload contain only update.app then successful. Hope this will help.
Click to expand...
Click to collapse
Have you flashed it via updater at second time!?
Thank you so much, working great for 501L
Please more details for my 501l
Should i flash the modem file too before updating with the main file as per suggested procedure.. how did you manage to make this work on a 501l .. please clarify..
anyone got root?
giuliano.rigon said:
Should i flash the modem file too before updating with the main file as per suggested procedure.. how did you manage to make this work on a 501l .. please clarify..
Click to expand...
Click to collapse
1. Ensure your X1 501L is on the latest EMUI 3.0 7D-503LV100R002C208B011 ROM.
2. Flash this rom => http://www.mediafire.com/download/9e...08B011SP05.zip
3. Follow post #9 put attach file to dload folder + main rom and copy to micro sd card, and go to restart your phone.
Good luck.
sikidim7 said:
anyone got root?
Click to expand...
Click to collapse
Same question here, tried a few methods but no prevail, my bootloader is unlocked & rooting were easy on Kitkat. Any advise?
File was removed from mediafire apparently.. .. is it the same one you can download at the start of this post? i have dowloaded it already.. the file you tried to share has been in any waymodified for 501l.. thanks
---------- Post added at 09:42 AM ---------- Previous post was at 09:40 AM ----------
Cannot find file on mediafire.. is it a modificstionof the one at the start of the post, the 503l one.. i got that one..
Sorry but mediafire lists your file as unavailable.. thanks for reposting if you can..
---------- Post added at 04:22 PM ---------- Previous post was at 04:05 PM ----------
Eoo007 said:
Thank you so much, working great for 501L
Click to expand...
Click to collapse
Unrooted 501l on european b103.. how do i proceed please to flash this lollipop 503l on my phone.. if anyone could help..
giuliano.rigon said:
Sorry but mediafire lists your file as unavailable.. thanks for reposting if you can..
Unrooted 501l on european b103.. how do i proceed please to flash this lollipop 503l on my phone.. if anyone could help..
Click to expand...
Click to collapse
it is the same file i posted in the OP, it is not removed, rather Eoo007 didn't do a proper link, here u go:
http://www.mediafire.com/download/9ea7yb206d869ya/7D-503LV100R002C208B011SP05.zip
from huawei's forum, this file apparently also serves the purpose of re-partitioning to accommodate lollipop, other than updating the necessary modems.
good luck
Related
Dear all,
This is my 1st post in XDA developers. And this is the first time I use Android system on a smart phone named Huawei Honor U8860. I learnt from websites and I know how to install ClockWorkMod. After installed stock rom from Huawei China (China site). I found out that I can't install any rom after that (always Update Failed). So I decided to format all the thing on my phone by using ClockWorkMod (/boot, /sdcard, etc...) and now my phone starts on blue screen and I realized that there is no image folder on the folder (the folder that you put recovery-v8.img file to setup ClockWorkMod). Now what do I have to do to bring back the recovery or someone please send me the image folder and guide me how to install rom for the phone since there is nothing left in my phone!
Regards,
Paul
Download orginal GB 2.3.6 from international Huawei site.
Make dload folder on root in memory card and put the UPDATE.APP (some ROMs also have UPDATE_CUST.APP, don't leave it out) inside the folder
Start up phone with volume up/down pressed while pressing power button.
DeuXGod said:
Download orginal GB 2.3.6 from international Huawei site.
Make dload folder on root in memory card and put the UPDATE.APP (some ROMs also have UPDATE_CUST.APP, don't leave it out) inside the folder
Start up phone with volume up/down pressed while pressing power button.
Click to expand...
Click to collapse
I tried, and it seems while installing the package, the update failed, what's wrong with my phone? I did not have any problem when I upgraded my firmware before the time I use the stock rom from China
What error?
hi, i can help you
download this:
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDEyODk=
install as a normal upgrade, than, installl any offycial rom and you have your honor fixed
This rom is the exactly rom that make my phone stuck in this situation, so do I have to install it back on my phone? Install the rom back to the one that harm me then apply this update?
@DeuXGod: Update Failed while installing firmware after unpacking
no, you have to install the file that i posted first, than install the rom! the file is the fix provided by the huawei for the failure updating of the original roms! flash the file first, and than, flash the rom!
edit: if not work, try this other : https://rapidshare.com/#!download|309p5|4238175827|UPDATE.rar|0 , unpack rar, make a dload folder in the sd card, put here the update app, and flash like a stock rom, later, install the official one
Thank you Paul! Now I find the solution for this, at first, if you installed the 2.3 Chinese rom that post on Huawei China (the first 2.3 rom posted on 2012-03-08)
It will prevent you from install ANY OTHER roms, so if you want to install another rom, there is an update patch for this one (the one that paul89... has posted above).
After that you can freely install any official/stock rom on Huawei Devices.
And for the users that format everything(/boot, /sdcard, /system, etc...) and your phone show up as a blue screen instead of pink screen when u press the power button (yeah there is no image folder in recovery partition).
Download the 2.3 stock rom from Huawei China (above)
Get your SD card out of the phone, using the USB/SD card converter tool to plug it to ur PC as an USB, copy the rom (dload folder in the zip) to the card.
After that, plugin your SD card to your phone, then press Volume + - and Power and the phone will go straight into upgrade firmware.
Then use the Paul89 patch that I've shown above, copy the dload folder to your SD, remember to delete the old one, use storage upgrade function of your Android to apply the patch. And now ... you can freely jailbreak the prison of stock Huawei China rom
And sorry for not linking your URL, this forum always ask me for the Image Verification even I Multi Quote ur replies
for nothig if i can, i help
SUTL?
Maybe a bit late, but in my experience, using SUTLR to flash ROMs (official/custom) works the best. It overwrites & updates everything (i.e. if you have CWM, it will be overwritten) and you will have the phone just like you got it from the dealer.
SUTLR? what is this tool?
-edit: googled, software update tool.. ok, but its only for official roms?
Dear rammy,
This is the first time I use android system on the phone and I found out that it's much complicated comparing with iPhone and I don't know any tool to use with it
SUTLR - Quick Guide
paul89rulez said:
SUTLR? what is this tool?
-edit: googled, software update tool.. ok, but its only for official roms?
Click to expand...
Click to collapse
You can use it for any ROM that comes in .nb0 format. Since most custom ROMs are in .zip format you can use it mostly for official ROMs. However, there are other custom ROMs (such as on andro-id.net) which come in the .nb0 format.
usrpaul said:
Dear rammy,
This is the first time I use android system on the phone and I found out that it's much complicated comparing with iPhone and I don't know any tool to use with it
Click to expand...
Click to collapse
1. SUTL is quite simple to use. You can download it from the net (latest version is v1.8.2). Install it (works only with Windows) and you are ready to use the application.
2. To use SUTL to flash your ROM, boot your phone in download mode (i.e. where you have the message - Incoming Download Mode polling) when you boot.
3. Connect your phone via USB cable to your PC. The device will get recognized and Windows will attempt to open the folder (similar to when you insert a pen drive). You can close this window
4. Start SUTLR. Click on next and using the Browse button, navigate to the .nb0 file. The file must be named firmware.nb0. Click on next and the screen shows the progress of ROM installation. DO NOT DISCONNECT TILL COMPLETION
5. Once the ROM is installed, you need to remove the battery to come out of download mode. Restart the phone and the new ROM will start up.
Note: Please take backup of data and/or ROM (including recovery.img). SUTLR will replace everything (i.e. it will even unroot the phone if you flash an official ROM)
Hope this helps. I am also a beginner and this "guide" is based on other posts as well as my experience.
yes, but the isnt .NB0 roms for our u8860..and offycial rom are not .nb0, but .img..so how do you have installed offycial rom in your honor?
paul89rulez said:
yes, but the isnt .NB0 roms for our u8860..and offycial rom are not .nb0, but .img..so how do you have installed offycial rom in your honor?
Click to expand...
Click to collapse
thank you very much , my phone came back to live thankyou so mucho im so happy!!
paul89rulez said:
no, you have to install the file that i posted first, than install the rom! the file is the fix provided by the huawei for the failure updating of the original roms! flash the file first, and than, flash the rom!
edit: if not work, try this other : https://rapidshare.com/#!download|309p5|4238175827|UPDATE.rar|0 , unpack rar, make a dload folder in the sd card, put here the update app, and flash like a stock rom, later, install the official one
Click to expand...
Click to collapse
i have upgraded my phone to 4.03 official chinese rom by mistake .. i tried both files but same msg appeare update failed
Is there any way you could re-upload the fix? The link is dead and I really need the fix
Thanks in advance!
Fix for 4.0.3
dr_hawarey said:
i have upgraded my phone to 4.03 official chinese rom by mistake .. i tried both files but same msg appeare update failed
Click to expand...
Click to collapse
Hi, I have also encounted this problem. All you have to do is to download this Update.app, place it in your sdcard/dload and update it. then you can start flashing into an older Android www(dot)huaweidevice(dot)com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE5Nzg= Sorry I am new and cannot post hyperlink
mirror
Zhan Yao said:
Hi, I have also encounted this problem. All you have to do is to download this Update.app, place it in your sdcard/dload and update it. then you can start flashing into an older Android www(dot)huaweidevice(dot)com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE5Nzg= Sorry I am new and cannot post hyperlink
Click to expand...
Click to collapse
Another mirror is needed
u8860 honor
paul89rulez said:
SUTLR? what is this tool?
-edit: googled, software update tool.. ok, but its only for official roms?
Click to expand...
Click to collapse
Good day friends I have huawei u8860 phone settings, such as ram When I entered CWM CWM installed and I had sense to, and he played with the settings and then restart the phone sd card and initially said it was green, red, blue screen can install version improves download and install the upload process will take place Vakat half, the offender arrives uptade continuous red light is blinking fast somehow gives error and does not install the software should remain deserted the friends I wonder what I can do about it if you have the software how much I've tried almost all of them had to installed the linux boot, blue screen, then cıkıyodu the same results, and the phone I said I was making the necessary drivers, maybe the phone's own mind, Perhaps yuklim Dload loads from there and now it continuously fails to install uptadeye goes so now I can not enter the phone hafizasinada soon as you open the phone directly into the phone goes so Dload upload file you copied to the [sm = s20.gif]
** DISCLAIMER: I AM NOT A DEVELOPER. I DO THIS AS A HOBBY AND SHARE MY FINDINGS IN CASE SOMEONE ELSE FINDS THEM USEFUL. **
** THIS WORKED ON MY DEVICE BUT IT MAY NOT WORK ON YOURS. APPLY AT YOUR OWN RISK **
This post shows you how to upgrade your system to lollipop 5.1.1 and optionally have root privileges. This is tested on C6833 model. For other models see the troubleshooting section near the end of the post.
Requirements:
Flashtool 0.9.18.6. or 0.9.19.6 or higher Important: Do not use Flashtool 0.9.19.0.
If you want to root the phone: Rooted XZU on Android version 5.0.2 or Kitkat with custom recovery installed.
This works on locked or unlocked bootloaders and any customization.
Download link for upgrade only:
C6833_14.6.A.0.368_1275-8026_R2D.ftf (unmodified Customized DE):
https://mega.nz/#!khF1nILD!C5D70e-BjCKVBCuOurjFOLcIMZDcldYVeIDnFiR-PGM
Download link for upgrade and root:
5.1.1-system.zip:
https://mega.nz/#!YoFgCSjA!Zh8t_4jeXcAEWhOYePA40uQLI7vw4-CnxohjBdMbpz0
C6833_14.6.A.0.368_No_System.ftf
https://mega.nz/#!l4dllSTT!R393EG4W3CwOZp1OLOzfUzpHF0IlvsmfW04BrGOggXc
Instructions for upgrading without root:
1- Back up your internal SDCARD and your apps.
2- Download C6833_14.6.A.0.368_1275-8026_R2D.ftf
3- Open Flashtool and click on the flash icon. Choose flash mode.
4- Navigate to where you saved C6833_14.6.A.0.368_1275-8026_R2D.ftf and flash this ftf with your phone in flash mode. I recommend wiping apps and cache and data (Note that wiping data will erase your internal SDcard too). To put your phone in flash mode, hold the volume down button when it is off and connect with the USB cable to the PC.
5- Reboot.
Instructions for upgrading with root:
0- If your existing system is rooted using Kingroot read the troubleshooting section below before continuing.
1- Back up your internal SDCARD and your apps.
2- Download C6833_14.6.A.0.368_No_System.ftf and 5.1.1_system.zip.
3- Copy 5.1.1-system.zip to your phone's internal SDcard.
4- Reboot to recovery and install 5.1.1-system.zip.
5- If you are coming from Kitkat just Turn the phone off. If you are coming from 5.0.2, reboot the phone and let it work through the boot animation which will take a while. Then it will show force closing messages and possibly reboots itself. At this point turn it off by holding down the power and volume-up keys for a few seconds. The phone will vibrate 3 times and turns off.
6- Open Flashtool and click on the flash icon. Choose flash mode.
7- Navigate to where you saved C6833_14.6.A.0.368_No_System.ftf and flash this ftf with your phone in flash mode. I recommend wiping apps and cache and data (Note that wiping data will erase your internal SDcard too). To put your phone in flash mode, hold the volume down button when it is off and connect with the USB cable to the PC.
8- Reboot.
Troubleshooting, etc.
This procedure works only if you follow every step carefully. When you are done you can easily test your root status in a terminal emulator or via adb. Please see the attached image.
If you have used Kingroot to root your existing system flashing this ROM may not work and it may leave your system with a partially updated file system that may be broken. The reason is that Kingroot (which in my opinion is malware) makes some of your system files immutable which means they cannot be removed during a software upgrade. To proceed, you should either find a way to replace this horrendous piece of code with SuperSU or downgrade to Kitkat and root with XZDualRecovery before trying this guide. Read the second part of http://forum.xda-developers.com/showpost.php?p=62936808&postcount=22.
If during the procedure for root the flashing of the ftf in step 7 fails, repeat step 7 with C6833_14.6.A.0.368_1275-8026_R2D.ftf or any other 14.6.A.0.368 ftf but exclude the system partition in the flashtool dialog window. If you don't exclude the system partition you will not get root.
If you have root after the procedure but something else doesn't work, try a factory reset.
Note that flashtool 0.9.19.0 was specifically released to support the new sin format on new devices and some of its features don't work with older devices. So to avoid taking any chances I used version 18.
I don't know if this works for C6802 or C6806. Some users reported success on 6806, like this one and this. For that model you follow this guide and use the zip file posted here. The only difference is that instead of flashing the ftf posted here in the next step, use the stock 14.6.A.0.368 ftf for your phone and exclude system.
Will this C6833 FTF work on a C6806 USA phone?, because I can't find a C6806 FTF anywhere...
Can this system zip be used with other customized versions of c6833 ftf.
usagi111 said:
Will this C6833 FTF work on a C6806 USA phone?, because I can't find a C6806 FTF anywhere...
Click to expand...
Click to collapse
I just uploaded a C6806 US version in Development thread yesterday.
Sent from my A0001 using Tapatalk
could you share flashtool 0.9.18.0 cos I can't find that version only higher.
will this work on c6802 just wondering?
I did as you said but. I see no super-su
jaime4272 said:
I did as you said but. I see no super-su
Click to expand...
Click to collapse
You probably didn't exclude the system partition in this step:
7- Navigate to where you saved C6833_Customized+DE_14.6.A.0.368.ftf.*Exclude system partition*and flash this ftf.
Out of curiosity, what is wrong with the latest flashtool?
---------- Post added at 10:11 PM ---------- Previous post was at 10:00 PM ----------
jaime4272 said:
could you share flashtool 0.9.18.0 cos I can't find that version only higher.
will this work on c6802 just wondering?
Click to expand...
Click to collapse
I've uploaded 0.9.18.6
https://drive.google.com/file/d/0B2L0y84PJ2rteVNGVnlJWjFlOGs/view?usp=sharing
Never mind, i already found out, also flashtool published a new version wich is compatible with our device
http://www.flashtool.net/downloads.php
thanks mate, everything worked fine
I was able to flash android 5.1.1 but could not get root and I did every step as posted and I did exclude system partition. and without root could not install dual recovery there for could not flash SuperSU
I am sorry for my noobie question...but what is customised DE?
ALso if i run this, I am still at locked bootloader...will i lose the partition that enable me to have all Sony's special goodies (i didn't mean the bloatware of course)?
Also i am running stock 5.1.1 already after OTA but interested to have root...shall i go with the 2nd steps with root?
im4u2nv said:
I am sorry for my noobie question...but what is customised DE?
ALso if i run this, I am still at locked bootloader...will i lose the partition that enable me to have all Sony's special goodies (i didn't mean the bloatware of course)?
Also i am running stock 5.1.1 already after OTA but interested to have root...shall i go with the 2nd steps with root?
Click to expand...
Click to collapse
Customized DE just means it is the German version of the ROM. I used that because I bought the phone in Germany. But the menus and keyboard and everything is in English so you would not even notice the difference.
This method will not touch your bootloader status so if you are locked you remain locked.
If you are already on 5.1.1 through OTA this will not work for you. You need to start from rooted 5.0.2 with recovery installed.
najoor said:
Customized DE just means it is the German version of the ROM. I used that because I bought the phone in Germany. But the menus and keyboard and everything is in English so you would not even notice the difference.
This method will not touch your bootloader status so if you are locked you remain locked.
If you are already on 5.1.1 through OTA this will not work for you. You need to start from rooted 5.0.2 with recovery installed.
Click to expand...
Click to collapse
Thank you Najoor...in that case, i will wait for some guide to root 5.1.1 then...
I am using stock kitkat custom rom will I have to update to Lollipop 5.0 first or can i directly flash 5.1
terminator1983 said:
I am using stock kitkat custom rom will I have to update to Lollipop 5.0 first or can i directly flash 5.1
Click to expand...
Click to collapse
I think you can still do it straight from kitkat but if you are following the instructions with root in step 5 instead of rebooting just turn the phone off.
Let me know if that works.
so my ZU used to be rooted with Lollipop 5.0.2, but i removed Kinguser/chinese root app and no longer have root access. I've also previously installed recovery but don't know if it will still work ? i forgot how to boot into recovery to see if it even works.. any helpers?
Power on the phone and when u see the led notification start pressing either the Volume UP or Volume Down key a couple of times to make your phone boot into recovery mode
corrado85 said:
so my ZU used to be rooted with Lollipop 5.0.2, but i removed Kinguser/chinese root app and no longer have root access. I've also previously installed recovery but don't know if it will still work ? i forgot how to boot into recovery to see if it even works.. any helpers?
Click to expand...
Click to collapse
najoor said:
I think you can still do it straight from kitkat but if you are following the instructions with root in step 5 instead of rebooting just turn the phone off.
Let me know if that works.
Click to expand...
Click to collapse
Thanks najoor it worked now i am using a rooted stock 5.1.1
jaime4272 said:
I was able to flash android 5.1.1 but could not get root and I did every step as posted and I did exclude system partition. and without root could not install dual recovery there for could not flash SuperSU
Click to expand...
Click to collapse
I am not able to instal 5.1.1-system.zip on rooted Sony Xperia Z Ultra c6833 with Android 5.0.2. The instalation is aborted
Had 5.1.1 lollipop installed, downgraded to 4.4.4 kitkat and rooted with kingroot successfully- installed xzu dual recovery and rebooted into recovery mode.
Flashed 5.1.1 zip and turned off. Flashed 5.1.1 Saudi Arabia ftf with flashtool (wipe everything - ticking to exclude system partition) with phone off and connected z ultra in flash mode and flashed successfully. Disconnected and booted.. took a while on wave animation and started fresh but no supersu and not rooted in 5.1.1?? any help thanks
Hello all,
First of all the story.
I used the script to rebrand, it has a fail but the phone still working.
One evening, i decided to wipe all by twrp and re run the unbrand script..... that was a huge error, the phone boot but boot loop, and after, the script stuck an no recognise the twrp on the phone.
Tried lot of things like flashing recovery etc in fastboot but nothing else happen than a boot and a black screen with nav bar only.
At this point i think the problem is that i was unable to flash cust.img with fastboot
Whad did I Do?
(Bootloarder must be unlock)
1st: Crying.
2nd: read tons of things on XDA
3rd: Try to re run the script but fail because the phone was still rooted.
4th: Crying
5th: Read lot of other things on XDA
6th: this is the good IDEA
7th: Download Huawei firmware finder
8th: Download Huawei Multitool
9th: Download Huawei Update Extractor
10th: download by the tool the full OTA firmware and dependencies (in my case VTR-L09C432)
11th: extract the update.app (chose "other" for phone model) from the big "update.zip" dowloaded before an put it in a folder of your choice
12th: extract the update.app from the "update_all_hw_xxx" dowloaded before an put it in other folders, just incase of files could have the same names (not sure of it)
13th: run Huawei Multitool (il will create a folder in the path of where the app is when you click, the folder you need is "unbrick")
14th: choose 6 on Huawei multi tool, it will show you what img's you need, and you need everthing exept data.img (the cus.img is in folder wehre you extract update_all_hw_xxx) in "unbrick" folder -> Place the .img needed in the "unbrick" folder (very important)
15th: boot your phone in bootloader mode (phone off, vol-down+plug USB)
16th: clic the button to launch procedure (press N)
17th: have a coffee during the upload it'll ask to reboot
18th: If the problem is solved: cool, stop here
IF NOT: shutdown the phone
19th: Go in classic recovery: Phone off, Vol-Up + Plug USB, when huawei logo stop pressing vol-up
DO NOT BOOT eRecovery, it will not help
20th: in classic recovery do factory reset AND cache reset
21th Reboot
You can relock your bootloader if you want with your code.
The only thing i don't know to do and if someone can telle me is, before the flash of every things or at a moment, if i can flash via ADB the OEM info for an official bootloader relock.
Thx to @mankindtw, @worstenbrood and @inside!out
Hope it will help, it work for me.
edit: can an admin put my title in bold?
Like the Parts with crying ?
Can you create a easy easy 1 click installer for the unbrand Script? ?
StonyD said:
Like the Parts with crying
Can you create a easy easy 1 click installer for the unbrand Script?
Click to expand...
Click to collapse
Unfortunately not, i'm not a dev, i don't have the knowledge......
Maybe one day i'll try
Hi thanks for sharing your experience.
I want just to ask some questions :
Where to place all folders that you talked about ? Directory?
What you mean by chose phone model ? In that new folder ?
The brick folder that will appear within huawei multitool folder ? I saw just unbrick folder.
Thanks.
dxkernel said:
Hi thanks for sharing your experience.
I want just to ask some questions :
Where to place all folders that you talked about ? Directory?
What you mean by chose phone model ? In that new folder ?
The brick folder that will appear within huawei multitool folder ? I saw just unbrick folder.
Thanks.
Click to expand...
Click to collapse
When you download the 3 files of the firmware, place them where you want.
When you lauchn Huawei Multitool, it will create the "unbrick" folder in the Huawei Multitool folder (my bad) not "brick", i update the first post.
When you use Huawei Update Extractor, you have choices for type of firmware, chose other.
help anyone i need the cust file for the p10 plus
i dont understand where im supposed to get the file
Hi, i am a bit confused.
I download all 3 files with rhe firmware tool. But then i got lost. Can you help me please?
Thanks
[email protected] said:
help anyone i need the cust file for the p10 plus
i dont understand where im supposed to get the file
Click to expand...
Click to collapse
It's in one of the ZIP (680mo in my memory)
Hello. Your post has been very helpful, after hours I've now managed to make some progress. All seems to have gone well after following your instructions, however at the end I'm unable to do a factory reset. At most it gets to 6% then fails. Any ideas on what may be going on?
I'm starting to think the phone may be beyond saving, all for one stupid mistake while rooting .
I can't find "other" or "other model" folder.
Thanks
aalmeida1972 said:
I can't find "other" or "other model" folder.
Thanks
Click to expand...
Click to collapse
It's the default option in the firmware extractor, i add the precision in case of
My bad, the explanation was not clear, i modified it.
From my french mind to english, sometimes a little bit difficult....
DidymusNoble said:
Hello. Your post has been very helpful, after hours I've now managed to make some progress. All seems to have gone well after following your instructions, however at the end I'm unable to do a factory reset. At most it gets to 6% then fails. Any ideas on what may be going on?
I'm starting to think the phone may be beyond saving, all for one stupid mistake while rooting .
Click to expand...
Click to collapse
Did you flash the two recoverys ? Can You still access to twrp?
If twrp still here use it to erase system partition
In fastoboot u can do It too
Follow these steps to :
1-Go to recovery option hold the power and volume button at same time .
2-then go advanced option.
3-Its time to factory reset your phone .
4-Finally Rebort your device and waite few seconds.
4-
Any ideas what I should do if my phone still will not reboot please ?
I'm still crying
I have a canada version of vtr-09 p10, and I dont know my firmware number I couldn't find my firmware in that software, please tell me what can I do.
---------- Post added at 09:12 AM ---------- Previous post was at 09:09 AM ----------
jimmygarison said:
Follow these steps to :
1-Go to recovery option hold the power and volume button at same time .
2-then go advanced option.
3-Its time to factory reset your phone .
4-Finally Rebort your device and waite few seconds.
4-
Click to expand...
Click to collapse
omg, how do you do that? you mean a advanced mode is in recovery mode or erecovery mode? I brought p10 at bell, I just couldnt find its firmware number.
ive done everything in this thread. the multitool installer finished without errors, then i did vol up + vol down + power, and it froze at 5 percent "installing update" then entered a reboot loop. then i tried a factory reset with vol up + power and it stoped at 25 percent.
Using the multi-tool
inoxas said:
Hello all,
First of all the story.
I used the script to rebrand, it has a fail but the phone still working.
One evening, i decided to wipe all by twrp and re run the unbrand script..... that was a huge error, the phone boot but boot loop, and after, the script stuck an no recognise the twrp on the phone.
Tried lot of things like flashing recovery etc in fastboot but nothing else happen than a boot and a black screen with nav bar only.
At this point i think the problem is that i was unable to flash cust.img with fastboot
Whad did I Do?
(Bootloarder must be unlock)
1st: Crying.
2nd: read tons of things on XDA
3rd: Try to re run the script but fail because the phone was still rooted.
4th: Crying
5th: Read lot of other things on XDA
6th: this is the good IDEA
7th: Download Huawei firmware finder
8th: Download Huawei Multitool
9th: Download Huawei Update Extractor
10th: download by the tool the full OTA firmware and dependencies (in my case VTR-L09C432)
11th: extract the update.app (chose "other" for phone model) from the big "update.zip" dowloaded before an put it in a folder of your choice
12th: extract the update.app from the "update_all_hw_xxx" dowloaded before an put it in other folders, just incase of files could have the same names (not sure of it)
13th: run Huawei Multitool (il will create a folder in the path of where the app is when you click, the folder you need is "unbrick")
14th: choose 6 on Huawei multi tool, it will show you what img's you need, and you need everthing exept data.img (the cus.img is in folder wehre you extract update_all_hw_xxx) in "unbrick" folder -> Place the .img needed in the "unbrick" folder (very important)
15th: boot your phone in bootloader mode (phone off, vol-down+plug USB)
16th: clic the button to launch procedure (press N)
17th: have a coffee during the upload it'll ask to reboot
18th: If the problem is solved: cool, stop here
IF NOT: shutdown the phone
19th: Go in classic recovery: Phone off, Vol-Up + Plug USB, when huawei logo stop pressing vol-up
DO NOT BOOT eRecovery, it will not help
20th: in classic recovery do factory reset AND cache reset
21th Reboot
You can relock your bootloader if you want with your code.
The only thing i don't know to do and if someone can telle me is, before the flash of every things or at a moment, if i can flash via ADB the OEM info for an official bootloader relock.
Thx to @mankindtw, @worstenbrood and @inside!out
Hope it will help, it work for me.
edit: can an admin put my title in bold?
Click to expand...
Click to collapse
Can you please tell me what option 6 is on the multi-tool. Do I drag files into the unbrick folder?
Pombal81 said:
Can you please tell me what option 6 is on the multi-tool. Do I drag files into the unbrick folder?
Click to expand...
Click to collapse
opt 6 is in my memory "unbrick" or recover.
You have to put all the .img files needed exept data.img that is not possible to heve because this file is on your phone and encrypted.
Thanks for helping me, how can I tell what .img files are needed? I can't see anything that will tell me this?
---------- Post added at 04:13 PM ---------- Previous post was at 04:04 PM ----------
I'm sorry, I'm a bit confused on the intructions:-
I downloaded the full update zip file from the url using the firmware finder, there was another url link that came up called full/public/update - do I need the zip for this too?
I extracted the update zip to a folder and then extracted the update.app file using the Huawei update extractor.
Now I have a very long list of .img files in the extractor and I'm not clear what I need to do next i.e do I move them all into the unbrick folder on the tool?
Hi, I have since been able to extract the right files for the multi-tool. I extracted them again from the extractor. I now have placed them into the unbrick file. My problem now is that I can't run the tool - when I open the multi-tool .bat file its asking for a proxy port, where can I find this?
Many of the Indian Users of Honor View 10 C675 are stuck with custom roms and cannot quite find ways to get back to stock. For them, @oreopie wrote a thread to get back to original which was tested by both of us. Strangely, it worked for us the first time and the second time I tried it got it me into a bootloop. The method still works for @oreopie, but has stopped working for me. PLEASE BACKUP YOUR DATA BEFOREHAND TO AVERT ANY SERIOUS LOSSES OF ANY KIND, MONETARY OR EMOTIONAL.
This thread is meant to get done with the bootloop and get back to stock.:laugh:
Please try the method mentioned below by @oreopie initially,
Guide to return back to Indian Stock (C675) on V10 from any Custom ROM
https://forum.xda-developers.com/honor-view-10/how-to/guide-to-return-to-indian-stock-c675-t3800588
If this gives you a bootloop (which is unlikely), follow the below method.
PS- As much as this method is tested, We're not to take blames for any untoward happenings whatsoever. Please try this at your own risk.:fingers-crossed:
Prerequisites-
*Bootloader unlock code
*Fastboot and ADB drivers
*Some patience
@luckykhera2 's Rom backup (https://drive.google.com/uc?id=14XmgXGR2s1iBPixUh8rTMK0HcoGEuHmO&export=download)
*Huawei Extractor Tool (https://forum.xda-developers.com/showthread.php?t=2433454) - Thanks to @worstenbrood
*TWRP- Preferably unofficial all thanks to @Pretorian80 (https://www.google.co.in/amp/s/foru...velopment/recovery-twrp-3-2-1-0-t3769917/amp/)
The Method-
*Assuming, you're in a bootloop, please download Lucky Khera's rom backup. Extract it using 7zip or RAR, to find Update.APP in it.
*Create a folder, dload in the root of your SD card, and paste Update.APP in it.
*Use the combination of Volume down+Power (on plugging phone via USB) to enter fastboot mode.
*Hover to the ADB folder, and right click to find 'Open Command Window'.
*Type the commands- Fastboot OEM relock *Your Unlock Code*. This will lock your Bootloader.
Also, be warned that this will lead to loss of data, this is where a data backup will help you out.
*Do check if your bootloader is locked by turning on the device and rebooting it to fastboot mode. You'll see Phone-locked. Don't worry about FRP, we need that unlocked for now.
*Now that your bootloader is relocked, put in your sd card, and hold a combination of Volume Up+Volume Down+Power, until the phone goes to Honor bootsplash screen, to enter software downloading mode.
Here, I'm assuming you've Dload folder placed in your SD Root.
*If you've done everything properly, the software update procedure will start and you'll be greeted with a stock rom quite soon.
Unlocking your bootloader remains a choice to you, do shall you please. For me, I wanted an unlocked BL thereafter.
Enjoy Stock! Repeat the same method once Honor pushes a worthy, comprehensive OTA update.
Big thanks to @luckykhera2 and @oreopie for his rom backup and for an intensive research alongside, respectively.
@ankan1993 Thanks a lot for sharing the stock rom and helping me out. And this is what i did.
1. Extract the shared zip and put the dload folder in root of sd card.
2. Switch to fastboot mode.
3. Flash stock recovery.
4. Switch off the mobile.
5. Press vol up + down and power button for the update to start.
And voila it worked. The bootloader and frp got locked automatically after the update.
anwar08 said:
@ankan1993 Thanks a lot for sharing the stock rom and helping me out. And this is what i did.
1. Extract the shared zip and put the dload folder in root of sd card.
2. Switched to fastboot mode.
3. Flashed stock recovery.
4. Switched off the mobile.
5. Press vol up + down and power button for the update to start.
And voila it worked. The bootloader and frp got locked automatically after the update.
Click to expand...
Click to collapse
Pleasure! Goodluck with Honor View 10!??
im currently running custom rom, phone in working condition,if i place the file in internal storage instead of SD card, will it work?
Dload file bigger than 4gb so problem copying on fat32 SD card, can the phone read NTFS format SD card?
aditya desai said:
Dload file bigger than 4gb so problem copying on fat32 SD card, can the phone read NTFS format SD card?
Click to expand...
Click to collapse
Copy only the dload folder. Its around 3gb only
@ankan1993 a big Thumbs up for you man !!!
aditya desai said:
im currently running custom rom, phone in working condition,if i place the file in internal storage instead of SD card, will it work?
Click to expand...
Click to collapse
Since, relocking the bootloader erases everything inclusive of the internal memory, it is advisable to place it in your SD card. Some people tried with an unlocked bootloader and it worked for them, however, I'd advice otherwise, as Huawei somehow took away my version when I tried it on an unlocked bootloader.
aditya desai said:
Dload file bigger than 4gb so problem copying on fat32 SD card, can the phone read NTFS format SD card?
Click to expand...
Click to collapse
Since yours is a FAT32 partitioned SD, you won't be able to move the file. Yes, in such cases, NTFS comes to our rescue. Format it in NTFS partition and were good to go. Goodluck!
ben cherian said:
@ankan1993 a big Thumbs up for you man !!!
Click to expand...
Click to collapse
Means a lot, Ben! Thanks for bringing in a smile amidst a hectic day?
can i get themes and all working again after this?
vijaytechno21 said:
can i get themes and all working again after this?
Click to expand...
Click to collapse
I think yes
Powered by View 10
How to flash update_sd_BKL-L09I_hw_in after update.app?
vijaytechno21 said:
How to flash update_sd_BKL-L09I_hw_in after update.app?
Click to expand...
Click to collapse
If thats zip file, extract and use the same dload method.
---------- Post added at 01:04 PM ---------- Previous post was at 01:03 PM ----------
vijaytechno21 said:
can i get themes and all working again after this?
Click to expand...
Click to collapse
It works as stock. If not, then data file needs to be flashed in twrp
---------- Post added at 01:45 PM ---------- Previous post was at 01:04 PM ----------
vijaytechno21 said:
can i get themes and all working again after this?
Click to expand...
Click to collapse
It works as stock. If not, then data file needs to be flashed in twrp
Well FYI...
You were in bootloop cause your cache/internal was corrupt and when u relocked the bootloader it formatted it to fix it...
You would have been fine with a internal format, but anyway glad u got the device working
This should work even with unlocked bootloader
No need to relock bootloader. Dload will take care if that and lock it along with frp.
Op can update instruction.
---------- Post added at 09:32 AM ---------- Previous post was at 09:30 AM ----------
aditya desai said:
im currently running custom rom, phone in working condition,if i place the file in internal storage instead of SD card, will it work?
Click to expand...
Click to collapse
Dload is meant for sd card only. Although, i was able to get it work on my 5C but no other Huawei/honor phone and only sd card worked for dload.
So my phone is still in bootloop.
I`ve tried everything i could thing of. I1ve had TWRP installed, sideloaded custom roms, several official ones. Erased system, dalvik, cache and data through recovery and also ADB commands.
I tried it with official bootloaders, locked an unlocked. I`ve tried the Update.app on external SD card method (several versions).
Nothing get`s my phone out of bootloop. I`m at the end of my options really. Anyone has any new idea?
vladfalco said:
So my phone is still in bootloop.
I`ve tried everything i could thing of. I1ve had TWRP installed, sideloaded custom roms, several official ones. Erased system, dalvik, cache and data through recovery and also ADB commands.
I tried it with official bootloaders, locked an unlocked. I`ve tried the Update.app on external SD card method (several versions).
Nothing get`s my phone out of bootloop. I`m at the end of my options really. Anyone has any new idea?
Click to expand...
Click to collapse
Have you tried erecovery option? Boot to erecovery, download and install stock full firmware.
Else try once the guide i posted yesterday via fastboot.
erecovery gives me the "Getting package info failed" error and i did the fastboot method.
vladfalco said:
erecovery gives me the "Getting package info failed" error.
Click to expand...
Click to collapse
Go with fastboot.
Whats your variant?
Android 10 was released today for Galaxy M30 (INS) ,
Here i am posting 2 links
1. For users Who Just Want Stock Rom as it is
2. For Users Who Need rooted stock rom
Steps :
1. Download Zip and Extract
2. For without root users just flashing via odin would be enough
3. Progress if you wana root
4. when your done with setting up your stock rom , go into Software info and activate developer option
5. Turn on OEM unlock and turn off Auto Update System
6. Boot into download mode again
7. open odin and turn off auto reboot
8. Choose the magisk patched zip and extract
9. In Odin under AP choose this tar and flashed
10. now be careful and press volume down and power till your device boots and quickly press volume up and power to boot into recovery mode
11. Wipe Data in stock recovery and reboot and your good to go
So Here's a Grive Link
Both Firmwares need to be extracted and flashed via odin
Unrooted Stock Firmware
Stock Unrooted
Magisk Rooted
Magisk Rooted
XDAevDB Information
ANDROID 10 (ONEUI 2) Stock Firmware and Rooted (M305FDDU3CSL4), ROM for the Samsung Galaxy M30
Contributors
Er. Aditya
ROM OS Version: Android 10
Thanks to ,
Samsung For Firmware
topjohnwu for magisk
reserved just in case
last one
Sorry for ignorance, but... how do I flash the stock unrooted firmware using Odin?
shrmp said:
Sorry for ignorance, but... how do I flash the stock unrooted firmware using Odin?
Click to expand...
Click to collapse
unzip the zip file and there u will find these files
AP_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship_meta_RKEY_OS10.tar.md5
BL_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
CP_M305FDDU3CSL1_CP14521597_CL17406009_QB27626610_REV00_user_low_ship.tar.md5
CSC_OMC_ODM_M305FODM3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_ODM_M305FODM3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
in odin on your right you will find slots to select files
under BL choose BL_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
under AP choose AP_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship_meta_RKEY_OS10.tar.md5
under CP choose CP_M305FDDU3CSL1_CP14521597_CL17406009_QB27626610_REV00_user_low_ship.tar.md5
under CSC choose HOME_CSC_OMC_ODM_M305FODM3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
make sure ur phone is in download mode and you have your drivers installed
I see, does updating with Odin erase userdata?
---------- Post added at 22:05 ---------- Previous post was at 21:08 ----------
Nevermind, I just tried flashing the update but it does not work with the SM-M305M variant. Back to waiting...
Er. Aditya said:
7. open odin and turn off auto reboot
8. Choose the magisk patched zip and extract
9. In Odin under AP choose this tar and flashed
Click to expand...
Click to collapse
But, in Magisk here, it states:
Reboot to download mode, and flash magisk_patched.tar as AP in Odin, together with the BL, CP and HOME_CSC files. Never flash only an AP file, as Odin can shrink your /data file-system if you do.
Will it be any issues, if we just flash the AP?
Thanks. Flashed Magisk now.
Can i simply falsh it with twrp??
i did everything correctly i'm stuck on Samsung Boot Logo
help
zer0C00L...... said:
i did everything correctly i'm stuck on Samsung Boot Logo
help
Click to expand...
Click to collapse
these steps have been tested alot of times so make sure you dont miss any
Prxtek said:
Can i simply falsh it with twrp??
Click to expand...
Click to collapse
Nope. Plus this phone does not have a TWRP for Q as of now. Moreover, please do not try any TWRP as of now.
Use ODIN only.
---------- Post added at 00:48 ---------- Previous post was at 00:46 ----------
Er. Aditya said:
these steps have been tested alot of times so make sure you dont miss any
Click to expand...
Click to collapse
By any chance you have a list of bloatwares to remove?
vdbhb59 said:
Nope. Plus this phone does not have a TWRP for Q as of now. Moreover, please do not try any TWRP as of now.
Use ODIN only.
---------- Post added at 00:48 ---------- Previous post was at 00:46 ----------
By any chance you have a list of bloatwares to remove?
Click to expand...
Click to collapse
with root you can simply use titanium backuo and remove according to you
Er. Aditya said:
with root you can simply use titanium backuo and remove according to you
Click to expand...
Click to collapse
I tried, and I end up in bootloop, millions of times..
Trouble is, some inbuilt apps are bound with /system, and unable to get through. Moreover, you cannot imagine, I have been into bootloop 11 times since last evening.
So, if a list is present, I would be happy.
Last thing, did you notice, even if you have not logged into google account, it still keeps installing those 5 bloody recommended apps.
vdbhb59 said:
I tried, and I end up in bootloop, millions of times..
Trouble is, some inbuilt apps are bound with /system, and unable to get through. Moreover, you cannot imagine, I have been into bootloop 11 times since last evening.
So, if a list is present, I would be happy.
Last thing, did you notice, even if you have not logged into google account, it still keeps installing those 5 bloody recommended apps.
Click to expand...
Click to collapse
thats google preload stuff but happens just once , i havent faced this issue yet between make a list of apps your removing il take a look
and il work on a debloated version once i get some time
Please upload to one of the alternative sites (google quota block)
Whats the deal with U3, U4, U5 and greater version of bootloaders with Exynos chipset?
I know Samsung has locked bootloaders of USA snapdragon variants, but can all exynos chip-set ones be unlocked?
Or till U2 bootloader can be unlocked and can have root but above U3 cannot be rooted?
It's so confusing, Please someone Help me
Posted for the latest Patched Magisk here: https://forum.xda-developers.com/ga...d-firmware-t4026819/post81336955#post81336955
---------- Post added at 01:52 ---------- Previous post was at 01:52 ----------
For guides: https://forum.xda-developers.com/galaxy-m30/how-to/guide-galaxy-m30-recovery-edl-modes-t4020231
The M305M variant firmware with Android 10 can be found on sammobile. Can it be flashed without regard for the country it was made for or it has to be the same as the original firmware?
kesleyf said:
The M305M variant firmware with Android 10 can be found on sammobile. Can it be flashed without regard for the country it was made for or it has to be the same as the original firmware?
Click to expand...
Click to collapse
Can be used. However ensure you have mounted system.
You may lose data due to that. So ensure to have a backup.