Hi! I bricked my tv box and she stop work,only show amlogic logo.
I looking for firmware for tv android box M8 tt amlogic s802 with realtek 8723bs chip
I tray many rom who find on internet but without results. Motherboard is M8&M9_V02
I cant find ROM,anyone help me please?
In time when i wait for help i flash rom for probox Probox-ex2 with sd card an have functionaly tv box,but no work wifi bloototh and remote control. I tray many many roms,only this probox and rom for mx III have boot and everthing work but wifi bt nd remote control no,because in my box is realtek wifi chip.Now,i dont know how to port realtek driver in my rom...if anybody have seems box can you make backup and upload it?
I have fount 2 rom who works on this box,but no working wifi,remote control and bluetooth...one rom is for probox ex2 and other is for mx III and booth works ok but no wifi...How to flash driver for wifi only in this rom?
i have the same ott tv m8 Fake box!
But i´m confused with this little box from Hell.
For me Probox Ex2 Rom ends with flashing at 2%. I have to flas via USB Burning Tool, because another earlier Firmware flash had to go wrong.
what is with the other Rom? You talk about 2 Roms.
Probox Ex2 Rom must flash with tothpick method and sd card,also other rom for mx 3
I own the Bqeel 2019 Android 8.1 TV Box Y4 MAX / Amlogic S905X2 Quad Core / 4G DDR4+64G eMMC / Dual WIFI 2.4/5.8G + 100M LAN / tv box Bluetooth 4.0 / USB 3.0/ HDMI 2.1 /4K Smart TV Box .
I have tried many custom roms and none of them seem to work in the correct manner. I am able to use the latest USB burning tool but lot of these custom roms will flop on me after the install process. I feel like there is something usually wrong with the WIFI side. if it is not a wifi problem, then it is the remote control.
I have yet to find a custom rom where I can load and then use the device the way it is suppose to be. I want the remote to work correctly. Keep in mind that I do have a direct Ethernet connection for this device.
I have contacted the original manufacturer hoping that they can send me the original default firmware.
Back to the topic, i am interested in the best, the latest, and the one the works the most for this device. All solutions have failed for me thus far.
ps: i will re try the following .img files that I was able to obtain from FreakTabs
- XTM_ATV_X96_4_4 (this one will not connect to the internet directly. it needs a cell phone or tablet, so i can transfer over the Wifi and Google Account settings. For some reason, this is impossible because it keeps asking for my WIFI password which i have entered many times in the device);
- Poison_S905x2_V2.0 (this one is easy to install but after the install, the GUI seems stuck. I can't open up any apps, and the weather icon is always spinning).
Again, i have tried maybe 5 different custom roms from freaktabs (i am sure they are posted here) and none of them seem to work.
Hello , i have same issue here
i flashed many times with many roms and no one work properly.
Sometimes i have no wifi/ethernet or no remote.
please if someone have the stock firmware of Bqeel y4 max 905x2 4/64go
Post it!!
really sorry for my english
alilous1000rr said:
Hello , i have same issue here
i flashed many times with many roms and no one work properly.
Sometimes i have no wifi/ethernet or no remote.
please if someone have the stock firmware of Bqeel y4 max 905x2 4/64go
Post it!!
really sorry for my english
Click to expand...
Click to collapse
I have the same problem.
I have tried many custom roms but nothing seems to work. Wifi and Bluetooth issues is a problem.
I too need STOCK firmware. I have extra device that is not been messed around with but i do not know how to make back up from stock rom. If i can make stock up rom with one app, i will do it ASAP and perhaps share it.
Edit: So I am able to obtain a back up of the stock firmware via Twrp from my second device, but it is not compatible with the other Bqeel system. All i see is the Bqeel Boot Logo.
I am still able to boot into recovery, and i can also install other custom roms (those custom roms stink).
I still need the orgiinal stock firmware in .img or i need a custom rom that actually works really great.
For those who want to purchase this device, you can but do not mess with custom roms. Just remove default apps and enjoy the default OS.
I contact the seller of my box (bqeel y4 max 4/64go) today
he gonna send me the stock firmware Asap.
I 'll share it when i 'll recieve it.
Thanks
alilous1000rr said:
I contact the seller of my box (bqeel y4 max 4/64go) today
he gonna send me the stock firmware Asap.
I 'll share it when i 'll recieve it.
Thanks
Click to expand...
Click to collapse
I did the same thing. They sent me the stock firmware. the device works great now! there is another hiccup though. For usb burning tool, you will need some license files. when you load the .img file in the program, it will not accept it. You need the license files (just transfer them in the directory in usb burning tool)
here is the link for license files and stock firmware.
https://mega.nz/#F!TvoShAAK!Jd0X15aoHWVdOf1rrYPc0g
I tried that firmware in my box and it freezes on logo!!!
any news for this device? I have tried many custom OS but none work due to missing drivers.
LooseEnd85 said:
I did the same thing. They sent me the stock firmware. the device works great now! there is another
Click to expand...
Click to collapse
What did you actually wrote into the message? I'm in touch with them since a few days but I cannot go over than "we can replace the unit"!
BTW, my Device Build Fingerprints: Amlogic/u211/u211:8.1.0/OPM1.171019.011/20190402:user/release-keys
Bqeel 2019 Android 9.0 TV Box Y4 MAX / Amlogic S905X2 Quad Core / 4G DDR4+64G eMMC / Dual WIFI 2.4/5.8G + 100M LAN / tv box Bluetooth 4.0 / USB 3.0/ HDMI 2.1 /4K UHD Smart TV Box
Yes... it should have android v9 but it's a v8.1... I found the error when the Amazon return window was already closed...
https://www.bqeel.net/download.html
There are firmwares from bqueel
Hi
Can somebody now tell me if firmware from bqeel.net works or not becuse I've seen a loot that say it's stuck at logo screen or it won't boot
Does it work or no?
so far the best custom ATV ported ROM I've found for this box is here: https://forum.freaktab.com/forum/tv...ionatv__bqeel_u214-y8_max_1000m_s905x3-test57
it is due for an update but works as is. I also have a SlimBox ROM that works for the Bqeel but I'll have to upload that to my Mega folder and share the link.
EDIT: nevermind my boxi s the Y8 Max this is asking for the Y4 Max,.
Hi guys
I have a kiii Pro s912 3g/16g dvbs2/t
I have a problem to enable/connect wifi
I tried a stock firmware, superceleron firmware and malaysik firmware
I tried a usb wifi but android dont recognize it.
How to test thr wifi chipset in order to check if its a hardware or software problem ?
Thx
falciatrice10 said:
Hi guys
I have a kiii Pro s912 3g/16g dvbs2/t
I have a problem to enable/connect wifi
I tried a stock firmware, superceleron firmware and malaysik firmware
I tried a usb wifi but android dont recognize it.
How to test thr wifi chipset in order to check if its a hardware or software problem ?
Thx
Click to expand...
Click to collapse
Because the Wi-Fi module is dead. You need to replace it.
Or you need to reboot or factory reset your box when get a problem to enable/connect to Wi-Fi network and the Wi-Fi module is fine.
Ive resolder my kiii with new wifi module and it wont help...
hi new here . i have a android head unit xtrons PE98MTVIPL . but i have a problem i have no wifi if i try to turn it on i cant its just turns on and of directly . so i have try to root my device whit out wifi so i can do some changes in the folder that have whit the wifi to do . but when i try to root i cant i have tested so many times now ...
the unit can not to be rooted ...
so now how can i root my device so i can solve my wifi problem .
system info
model px5 1024x600
android 9
build number rk3368 userdubug 9 pq2a.190305.002 20190724.150201
kernel version 4.4.167
mcu version mtce_gs_v3.30_1
cpu oct core a53
memory 4gb
best regard
Hello i need custom rom's for my device, i was installed (1.+[v8]+Aidan's+ROM+[s905x2]+(u211+&+u214)+(H96Max_X2)+FB-Cruz+Enrique+García (1) on my device SDOTT0202 / DV8519. Wifi scan available networks, but can't connect, also chromecast built in not working. This is info for my device.
SoCAmlogic S905X2
CPUQuad-core 1.8 GHz (ARM Cortex-A53)
GPUARM Mali-G31 MP2
RAM2GB
Storage8GB
What wifi chip does it have?
Hi, I will sent you a letter.
@kalehrl@galaxy94
Hi, if it helps to make firmware image I have make a dump of SDOTT0202 / DV8519 following files using Amlogic dump utility.
Pics in attach.
I think you can make the img file using the same amlogic kitchen. It's called something like dump2img but I'm not sure it will boot because the firmware is Google certified
Y300-0100 said:
@kalehrl@galaxy94
Hi, if it helps to make firmware image I have make a dump of SDOTT0202 / DV8519 following files using Amlogic dump utility.
Pics in attach.
Click to expand...
Click to collapse
Can you share the files?
I can try to make an image out of those files using amlogic kitchen.
kalehrl said:
Can you share the files?
I can try to make an image out of those files using amlogic kitchen.
Click to expand...
Click to collapse
I just saw your reply. I will zip files and upload it later. Thx
Hi, I have a similar TV box and I have a problem after changing the firmware. Bluetooth and wireless card do not work. If anyone can share a working firmware I would be very grateful ...
My device model: SDOTT0202 / DV8519
SoC Amlogic S905X2
CPU: Quad-core 1.8 GHz (ARM Cortex-A53)
GPU: ARM Mali-G31 MP2
RAM: 2GB
Storage: 8GB
and I think Bt+WiFi: AP6398SV
I tried the Aidans ROM V8 firmware, works great, but no wifi and bt.
You need to find a ROM with working WiFi or make a TWRP backup of vendor partition of the original firmware and post it here.
danevrs said:
Hi, I have a similar TV box and I have a problem after changing the firmware. Bluetooth and wireless card do not work. If anyone can share a working firmware I would be very grateful ...
My device model: SDOTT0202 / DV8519
SoC Amlogic S905X2
CPU: Quad-core 1.8 GHz (ARM Cortex-A53)
GPU: ARM Mali-G31 MP2
RAM: 2GB
Storage: 8GB
and I think Bt+WiFi: AP6398SV
I tried the Aidans ROM V8 firmware, works great, but no wifi and bt.
Click to expand...
Click to collapse
Is there something in particular that you didn't like about the stock firmware?
If the eon tv app auto launching was bothering you, the sdmc app(s) that force this can be disabled, which turns the device into stock android tv. Or, perhaps you couldn't get past the code screen at first bootup?
goapy said:
If the eon tv app auto launching was bothering you, for sdmc devices, they typically use two apps to force the auto launchin
Click to expand...
Click to collapse
One ott provider in my country using basically the same sdmc box but with a different WiFi chip does a nasty thing when your contract expires. If you reset the box after the contract expiration, the box is completely useless. When it boots, you are left with an info screen with the serial number of the box and a number to call. And you can't get past it.
Hello! I have SDOTT0202 device and I did something stipid - I did a factory reset.
Now, each time when I turn on the device - it tries to setup EON and I can't exit from EON Activation Screen and I can't use my device.
How could I restart it in recovery mode? I tryed with simultaneosly pressing power button and volum down button and while keep pressing them - turn on the electricity, but this doesn't work for me
Please help me to bypass this screen and to use my device for another applications.
Same here, I have the eon box and installed Adrian's custom rom, but the WIFI is not working and for the bluetooth - it is not working properly.
Does anyone have a rom that can be used for the eon box, with working WIFI and bluetooth?
@assenstef, can you make a copy of the original eon box rom and share it with us? Do you keep a backup copy?
gobara90 said:
Same here, I have the eon box and installed Adrian's custom rom, but the WIFI is not working and for the bluetooth - it is not working properly.
Does anyone have a rom that can be used for the eon box, with working WIFI and bluetooth?
@assenstef, can you make a copy of the original eon box rom and share it with us? Do you keep a backup copy?
Click to expand...
Click to collapse
What rom from Aidan u use?
gobara90 said:
Same here, I have the eon box and installed Adrian's custom rom, but the WIFI is not working and for the bluetooth - it is not working properly.
Click to expand...
Click to collapse
The wifi+bt combo module in the eon version (as pictured above in post #8) is the ap6398s, which uses the broadcom bcm4359.
I have original firmware for a bunch of dv8519 and dv8535 devices, but I wouldn't suggest anyone flash any of them before verifying that the device tree and bootloader match. In order to do this, you'd have to dump at least the bootloader and the device tree blob from your device before you overwrite it with anything else.
There are at least 2 slightly different versions of the EON box.
The one from Serbia has AP6356 but the one from Bulgaria has a different one.
Slimbox works fine with wifi on the Serbian version but not on the Bulgarian one.
I asked a user from Bulgaria to open his box and check the wifi module but there was no follow-up from him.
I have original fw dump from the Serbian version.
kalehrl said:
There are at least 2 slightly different versions of the EON box.
The one from Serbia has AP6356 but the one from Bulgaria has a different one.
Slimbox works fine with wifi on the Serbian version but not on the Bulgarian one.
I asked a user from Bulgaria to open his box and check the wifi module but there was no follow-up from him.
I have original fw dump from the Serbian version.
Click to expand...
Click to collapse
Hi I have BG version.Its with AP6398SV wi-fi module.
What rom can flash on this box?
vladakru said:
What rom can flash on this box?
Click to expand...
Click to collapse
Specifically, which device do you have and which wi-fi module does it have?
If you haven't overwritten the original firmware on the device yet, make a backup first using the AML Dump tool as shown in post #4 of this thread.
Яндекс
Найдётся всё
disk.yandex.ru
But your WiFi probably won't work. You will also lose Chromecast and widevine L1.