hi new here . i have a android head unit xtrons PE98MTVIPL . but i have a problem i have no wifi if i try to turn it on i cant its just turns on and of directly . so i have try to root my device whit out wifi so i can do some changes in the folder that have whit the wifi to do . but when i try to root i cant i have tested so many times now ...
the unit can not to be rooted ...
so now how can i root my device so i can solve my wifi problem .
system info
model px5 1024x600
android 9
build number rk3368 userdubug 9 pq2a.190305.002 20190724.150201
kernel version 4.4.167
mcu version mtce_gs_v3.30_1
cpu oct core a53
memory 4gb
best regard
Related
Hello,
I am new to this but i just got a flytouch 7 10,2 tablet. The device will not install software to the ext sd card slot as the internal one is already partitioned into 2 devices. so apps like "move2SD" do not see this 3rd location. I have been told by a friend that if I root the device or replace the kernal I can somehow change stuff so it will install to the ext sd card slot. Here are the specs :-
Model number BC1003
Android 4.0.3
Baseband version 1.2
Kernal Version 3.0.8+ [email protected]#139
Build number crane_bc1003-eng 4.0.3 IML74k 20120508 test-keys
If the above makes sense to anyone then any help on how to go about this would be helpful.
Carl
Hi , have you done anything for rooting your tablet ?
I have the same but the flytouch 8 version , please let me know if you succeed it.
I made root at this same tablet.I still looking how use hilink huawei e3131,beacouse I haven't internet by t-mobile dongle usb.sorry my english
Hello i got question.
Played Parallel Kingdom via Android and my device got banned ( was like wtf lol).
We were playing on one wifi spot and they said I was using multiaccount
Is there any way to change Device ID ?
Used CHange Android ID *Root* but didnt work( ID changed, still same issue).
Even if i flash a new rom it says the same Device blocked.
Im using a FunTab 7.0 atm on Ly-f1 rom which dont show Serial number in settings.
SPecification :
(ARM7) 1,2 GHz, Boxchip Allwinner A13A.
Graphics Mali 400,
512 MB RAM.
CWM 6.0
Please if anyone is able to help, send reply!
here is my situation !
i have a rooted " Crius tablet-Q7A "
Specs : ----
Model Number : Q7A
Android version : 4.0.4
Baseband version : 76XXU-USNSKOLYM-20452204-REV-A
Kernel Version : 3.0.8-pref
Build number : Q7A_20130116_V01
Processor : Qualcomm MSM7227-A
Memory : 512 MB DDR RAM, 4G Flash
----------------
1st : The drivers for the debugging mod aren't available. any compatible Driver Link ?
2nd : the device freeze on the first screen if i try to access the " bootloader " . why ?
3ed : the recovery mod is " Android system recovery <3e> ". is the " CWM " is compatible for the Q7A ?
4th : how to know what is the right ROM to install from the Specs ?
Thank you !
i need firmware crius tablet model Q7A !!!!
Specifications Q7A Model
Processor Qualcomm MSM7227-A 1.0G MhzCD
Open GL ES 2.0/Open VG1.1/SVG Tiny 1.2
OS Android 2.3.6/Andriod 4.0 for second shipment
LCD Screen 7 [email protected] pixels
Capacitive touch panel MultiTouch
Memory 512 MB DDR RAM, 4G Flash
Camera 0.3M Front,2.0M Main(CMOS)
GPS YES
WIFI IEEE 802.11 b/g/n
Bluetooth Bluetooth V2.1+EDR
3G WCDMA 900/2100Mhz
GSM/GPRS/EDGE 900/1800/1900Mhz
HSDPA:7.2Mbps
UMTS:384Kbps
Phone call Support
Extend Storage TF card 32GB max support
USB USB2.0 connection 5 pin USB.(USB Device,not OTG)
Video Decoder MP4,3GP,MPEG4,H.263,H.264
Audio Decoder MP3,AMR-WB/+,AAC,AAC+TM ,eAAC+
Battery 3000mAH 3.7V conversation time>4 hours
Dimension 195.5X117.5X13mm
Strong tablet no driver no Rom We Need some help from expert we have Jtag pinout /dump/ wé need only to find a correct rom that all.
i have this tablet, with 4.0.4 rom
is there any newer rom?
don't search for firmware for this **** tablets "ooridoo" and "nedjma" this are not officials,there is a way is to backup firmware with a13 rom backup from one wich worked fine then reflash the bad one with "aio universal flasher" tested and worked 100/100 good luck
HELLO Do someone find solution for Crius Q7A? need the dump and jtag pin
Crius Q7a
Hi dear can you help me?
i have the same tablet Q7a but it is bricked now so no boot no fastboot mode no recovery mode
how can i revive it ? is there a way to flash a dead tablet without accessing the fastboot mode or the recovey
mode ? is so can you extract the boot.img for me cause i have a boot problem i flash a wrong one ?
i really need help
Crius Q7a
No reply
ithink this post is dead as my stupid tablet
need this dump
fellourik said:
don't search for firmware for this **** tablets "ooridoo" and "nedjma" this are not officials,there is a way is to backup firmware with a13 rom backup from one wich worked fine then reflash the bad one with "aio universal flasher" tested and worked 100/100 good luck
Click to expand...
Click to collapse
please brother i need this dump if you can upload it
thanx a lot
HI. ( Sorry for my english )
My device M8S is tottaly bricked. Until the brick this device looged to google store, google loged this device as SkyKirin MS8. ( AMLOGIC S812 2g/8g)
I need firmware for this device ,i dont remember everting , but i looking android settings it seems to me i fund "SkyKirin and "n200".
I flash in sdcard megatron firmware for m8s and ms9 , work fine , but wifi not work, and see only 4gb.
I decided to flashing other firmwares , there is results :
20150129-eny-m8s.zip - no wifi , remonte control ok , power off not working
acemax M8S_0313_0602 kodi 14.2 - no wifi , remonte control buttons reversed.
m8s_ap6330_8g2g_150818_USB - no wifi, no ethernet, no remonte control......
KoDi_EM8S_eng_1114_20150123 - no wifi...j dont remember what else not working
All this firmwares see only 4gb ram :/
DEVICE M8S 2G/8G
NAND (SK Hynix H27UCG8T2ETR BC) 8G
WIFI AP6330
Does anybody know how to modify the Megatron-S812-M8S-M9 rom to see 8 gb and wifi working ? Then it to be perfect.
Same problem here.... :/
same issue i have
For un bricking theses device's it may be worth taking a look here http://freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s802/eny-acemax-ott/knowledge-tutorials/553667-how-to-unbrick-amlogic-s805-s802-s812-s905-video-tutorial
Did you guys every resolve this?
DEVICE M8S 2G/8G (SkyKirin/n200)
WIFI AP6330
MBX/n200/n200:4.4.2/KOT49H/20160706:user/test-keys
Dears, Help needed urgently
last week i was in a business trip to china and i bought a box called T1Box , 8G ram and 64GB internal memory , when i got back to my country i found that t's a full Chinese box with kitkat 4.4.2 and there is no play store or any other apps , i managed to add apps by usb but play store didn't work and youtube also and what worked was only the shareit , i sent the play store and youtube on share it but it also didn't work , i tried to hard reset the box by the button on the av hole by pressing on it and unplug and plug the power but for sorry the box do not turn on while am pressing on it , i installed an app called cpuz and found that it's not rooted , so can any one help me here installing playstore and apps or resetting the box to the original or how to root it and install another android version , here are some info attached from the box , hope you can help me here
proccessor 8X ARM Cortex-A7 @ 1.01 GHZ
GPU Mali-400
T1BOX ( Dolphin-FVd-p2)
manufacturer Allwinner
hardware sun 8i
Board Exdroid
root access No
Java VM Dalvik1.6.0
Kernel armv7l
kernel version 3.4.39 (20181217)
thanks alot in advance
now i flashed a wrong rom and the power do not come up can any one provide me with stock rom for allwinner h2+ ?
Rooting Allwinner H3 TVBOX
try this image
https://mega.nz/file/GMh2TaqS#gUYrsvsLIH2WqVPe08lQrU_kBzpgTMAXFXIvdtM0knA
it comes with android 7.0
but it is unrooted. I need help to gain root access to it. Thanks
you can also try this image:
https://mega.nz/file/qUpgzSbZ#MXC5ZH9Md0S3-jXEWdVrYdMo_KqyW2Tl1aZOGmBZvQg
it is rooted but with android 4.x.x