So after flashing 10/17/15 release of Tesla Arc_Flash I am unable to connect to the phone through adb without deleting the driver and adding it as an adb device. I have installed the LG G3 Verizon drivers but I am still not able to connect. In the device manager it shows that the drivers aren't there but also that they are there as a portable device. hxxp://tinypic.com/r/30ua82f/8
Also the command prompt is below. Brand new adb server started.
hxxp://tinypic.com/r/71myr4/8
Any help would be appreciated. If you need logs or anything else I am happy to provide it. Also since I feel this may get asked... Yes I have USB Debugging turned on. Have tried with Root for adb on and off and nothing seems to work. I can get it to connect through network but I don't want to constantly have to look for the IP address and port. This was also an issue in the previous release of Arc_Flash so please let me know.
Hi! Exactly what drive did you install and where did you get it from? Here is where I get the driver from http://www.lg.com/us/support-mobile/lg-LGVS985. Try rebooting the PC (without the phone connected) after installing the driver. Using the original cable that came with it, connect the phone to a different USB 2.0 port than you had tried previously - it can take up to 10 minutes to finish loading the driver. When it's complete Device Manager should have a listing for the phone in the Modem section, which isn't currently listed in your screenshot. Until you can get that solved you won't be able to reach it with adb.
Have you searched the Tesla ROM thread to see if anyone else has had the issue, in case it's specific to Tesla?
roirraW "edor" ehT said:
Hi! Exactly what drive did you install and where did you get it from? Here is where I get the driver from. Try rebooting the PC (without the phone connected) after installing the driver. Using the original cable that came with it, connect the phone to a different USB 2.0 port than you had tried previously - it can take up to 10 minutes to finish loading the driver. When it's complete Device Manager should have a listing for the phone in the Modem section, which isn't currently listed in your screenshot. Until you can get that solved you won't be able to reach it with adb.
Have you searched the Tesla ROM thread to see if anyone else has had the issue, in case it's specific to Tesla?
Click to expand...
Click to collapse
I searched the ROM thread but found nothing matching what I am experiencing but I followed everything even close to it. I installed those drivers just now and restarted both computer and phone. Still comes up as an unknown driver. There is no modem section inside of the computer still. I can manually add the drivers but it still doesn't seem to help.
Also to add. I also have tried to add it as a modem and it gives Windows Error code (10) that it can not start the driver. I forgot to mention. Windows 10.
Well, I've connected to my phone via adb and used the LG flash tools on Windows 10 last week or the week before, although I have my insider updates set to Fast Ring and I kinda regret it because there was a recent huge push of a beta Windows, and they've broken how I had my video associations set up and I can't get my subtitles to work any more either. Sorry for off topic. My point is since Windows 10 is considered a constant "change in progress", and especially for people like me who joined to get "insider" builds, it's hard to tell what makes things not work. My main reason for even being on Windows 10 is to see what they come up with in their insider builds, but I guess when it mucks with my video enjoying ability, I start losing my patience.
I would seriously consider trying a different PC, or if you have the capability of performing a fresh Windows installation, even of Windows 10, that very possibly would fix it. Or if you just recently, within the last 30 days, upgraded from an earlier Windows to Windows 10, and didn't perform a clean installation, you can revert the upgrade through the the Windows settings. No idea if reverting would solve the problem, either, though.
As @bweN diorD pointed out in another similar thread just yesterday or the day before, when someone in your situation ends up trying a different PC, then everything goes smoothly. As far as the cause, there's too many variables.
If you can't use anyone else's PC, there's an outside chance that you could even do it at a library computer, as long as you don't reboot the PC (which I usually recommend after initially installing the driver, but sometimes things work fine without that). Rebooting a library PC usually undoes all changes, putting it back exactly the way it was.
Let us know how you make out.
Related
Posted this on the general discussion section but have had no replies, hopefully someone here can help?
Hi everyone, first, this is my first post, new to the forums, at least as a registered user. I have a problem with my phone. I know most of you are wondering why I have not just read the other posts on the forums, but I have. I have attempted every solution to the problem posted previously.
Background: Phone: Samsung charge.
I was being impatient and did not want to wait for the gingerbread update form Verizon. I flashed the leaked gingerbread 2.3.4 onto my phone using odin. Everything went great. I was able to use my phone with no problems except shortened battery life, but nothing major. About a month ago the battery life was impossible to maintain and there were some software bugs, like clicks during calls, startup taking forever, around 2 minutes on average!, and random restarts that never happened before. I decided to look up some fixes and found that verizon and samsung had released GB 2.3.6 for the charge. I got excited and decided I wanted to get that, but I could not via OTA. I read some forum posts and they mentioned attempting a factory reset on the phone then trying OTA update. I went ahead with factory reset and everything went fine. My startup time is around 25 seconds now and no random clicks or gliches, but still not on 2.3.6, which was the whole point. I then decided to just flash the stock 2.3.6 rom to the phone.
Problem: When I plug my phone in to multiple computers it will charge but not connect to the computer. This means on my Mac it does not show as an external drive, which it has in the past. On my windows 7 machine it says that drivers were installed but could not be used (I can get the exact quote if needed.) I attempted to go into device manager and solve problem that way but it shows my phone as "unknown device". I have tried to enter download mode when hooked up to windows computers and no connection is found.
Possible solutions attempted and their outcomes:
1. As stated, I attempted the method shown in a thread on droid forums for installing the samsung drivers. I have attempted multiple times to install the drivers on my windows machine and the device remains "unknown".
2. I have attempted multiple cables on multiple computers, both mac and windows 7. No change.
3. I have installed adb and attempted to locate devices using adb devices command on mac. No devices found.
4. I have attempted all methods with both usb debugging checked and unchecked.
5. I have tried every possible usb port I have.
Ideas/questions I have had that I have no idea are possible or how to fix!
Would a factory reset take away the ability to connect to a computer from my phone. So, is there a piece of software in the build I have that controls the connection between the computer and the phone, an identifier of sorts, which is now missing, now that I have reset the leaked ROM.
Is there a way to flash a new ROM without connecting to a computer, via the sd card, and what is that? I have read some things in other posts but am too much of a n00b to understand most of them when using sdcards.
ANY help will be greatly appreciated. PLEASE PLEASE PLEASE!!! I have been at this for at least 6 hours, sifting through forums, searching google, attempting fixes that others have stated worked for them, only to fail every time. Thank you all.
have you try on a different pc?
maybe on your PC there is some problem with the drivers.
Moreover to connect via
adb u must enable Debug mode on your device in the application menu.
To flash kernel or other directly from your sd you can use the clockwordmode, but to install it you must before
install it and i fear you must use your cable connection
Sent from my GT-I9100 using XDA App
I have tried multiple PCs and a mac, even windows on bootcamp. I have installed drivers on every one, even uninstalled and reinstalled on one. One PC, my laptop was a fresh windows install (it was a linux box but I needed windows to use Odin). I was in debug mode and not in debug mode when attempting adb. Thanks for the suggestions though. As I said, I have tried numerous things and am completely stuck! so frustrating!
"I attempted to go into device manager and solve problem that way but it shows my phone as "unknown device"
Exactly there... you can try to force device to install a different driver.
Double click the unknown device then driver then update driver then find software in your computer then choose manually from a list of device drivers in your computer then show all devices you should see "android adb interface" or something related to google or android.
Try it... i hope this can help you.
THE PROBLEM HAS BEEN SOLVED!
If you have the MTP usb device driver error (code 10), then scroll down and try what worked for me.
Sparrow245 said:
So, I used Odin to reset my vibrant back to stock 2.1. I then tried to get it to 2.2 using Samsung Kies, but when ever I try to use it, MTP Device fails to install. Anyone know how to get the driver to install / work correctly so that I can use Kies? Thank you in advance.
Click to expand...
Click to collapse
You should really avoid using kies if possible. It is notorious for hard bricking phones, meaning they become paper weights if something goes wrong. You should install clockwork mod recovery and install a custom 2.2 ROM, there are literally tons to choose from and they are pre-rooted. Some of the custom ROMs have odin images so you could actually skip the clockwork recovery step. I'll link you to the 2.2 ROM I'm using or you can search for something different. Here is Axura 2.2, use the odin image in the 3rd post http://forum.xda-developers.com/showthread.php?t=1787267.
EDIT- if you also need drivers for your phone then go here http://forum.xda-developers.com/showthread.php?t=728929
Sent from my SGH-T959 using Tapatalk
If you want 2.2 (Froyo) installed on your Vibrant, like the other poster said, there are literally tons of great builds.
Here is a link to one that I really liked, it had great battery life, and overall good performance. Bionix V - http://forum.xda-developers.com/showthread.php?p=21324042
As stated above, please avoid using the Kies software, it generally creates many more problems than it is worth.
I've used Kies many times, so I know what I'm doing. But apparently this time something about the MTP driver isn't going alright. Could be that I have this fairly new computer? I've already tried installing the vibrant drivers, but for what ever reason I keep getting a code 10 error for the MTP usb device. :/
Well if your not doing so already, try running the program as administrator.
However, not sure why you are so hell bent on running the stock Froyo via Kies, when there are so many other amazing Froyo/GB/ICS/and now JB custom ROMs that work MUCH much better, and have way better support than Samsung could ever provide.
However, to each his own. Good luck to you with your endeavors!
Which ROM I want has nothing to do with my question. The problem is the MTP usb device, which apparently fails to start. (Code 10)? I've seen that it's a common problem, but there isn't any one definite answer. I was hoping maybe someone here knows how to fix it?
I know the thread is for a tablet, not sure which version of windows your running, but maybe something lime this is what you are looking for: http://forum.xda-developers.com/showthread.php?t=1150211
Sparrow245 said:
Which ROM I want has nothing to do with my question. The problem is the MTP usb device, which apparently fails to start. (Code 10)? I've seen that it's a common problem, but there isn't any one definite answer. I was hoping maybe someone here knows how to fix it?
Click to expand...
Click to collapse
Google code 10 error mtp
You should find a link that says fixed code 10 mtp error Samsung galaxy
It is a post on android forums or phandroid??? You should see it and it should fix your error.
sent from my magic box to yours
Ah! Finally found a solution! Not sure if this will work for everyone, but it worked for me.
1. Plug up your phone like usual. Connect with Samsung Kies. Obviously, you will get get MTP code 10 error.
2. Go to the device manager, and then uninstall the driver. Unplug your phone.
3. Go to c:\windows\system32\drivers and rename wudfrd.sys and winusb.sys to wudfrd1.sys and winusb1.sys respectively.
3. Plug your phone back in, and connect with Kies.
4. The computer will try and install the driver again, but fail.
5. Go to the device manager again, and attempt to update the driver. It should fail, and you should get a (code 28) error this time. Make sure you have a code 28 error!
6. Go back to c:\windows\system32\driver and rename the 2 files back to it's original names.
7. Go to c:\windows\inf and look for a file named wpdmtp.PNF. Take the file, and move it somewhere else (like your desktop) don't delete it.
8. Now go to the MTP usb device again, and attempt to update drivers. It should update, and recognize your device now.
This is what worked for me, I don't know if it will work for you. I'm not responsible for anything that goes wrong.
Sparrow245 said:
I've used Kies many times, so I know what I'm doing.
Click to expand...
Click to collapse
When kies hard bricks your phone I'll be here to say I told ya so. Its really an unnecessary risk but its your phone, good luck.
Sent from my SGH-T959 using Tapatalk
@sparrow, that's exactly what I read but it was to much to type.
sent from my magic box to yours
Please Help
hey man did you ever get the MTP driver to start? I am still at a loss with this myself.
Sparrow245 said:
Which ROM I want has nothing to do with my question. The problem is the MTP usb device, which apparently fails to start. (Code 10)? I've seen that it's a common problem, but there isn't any one definite answer. I was hoping maybe someone here knows how to fix it?
Click to expand...
Click to collapse
Sparrow245 said:
Ah! Finally found a solution! Not sure if this will work for everyone, but it worked for me.
1. Plug up your phone like usual. Connect with Samsung Kies. Obviously, you will get get MTP code 10 error.
2. Go to the device manager, and then uninstall the driver. Unplug your phone.
3. Go to c:\windows\system32\drivers and rename wudfrd.sys and winusb.sys to wudfrd1.sys and winusb1.sys respectively.
3. Plug your phone back in, and connect with Kies.
4. The computer will try and install the driver again, but fail.
5. Go to the device manager again, and attempt to update the driver. It should fail, and you should get a (code 28) error this time. Make sure you have a code 28 error!
6. Go back to c:\windows\system32\driver and rename the 2 files back to it's original names.
7. Go to c:\windows\inf and look for a file named wpdmtp.PNF. Take the file, and move it somewhere else (like your desktop) don't delete it.
8. Now go to the MTP usb device again, and attempt to update drivers. It should update, and recognize your device now.
This is what worked for me, I don't know if it will work for you. I'm not responsible for anything that goes wrong.
Click to expand...
Click to collapse
This is the steps used to fix.
Sent from my SCH-I535 using xda premium
Now is really solved.
For some reason, any of those options helped me to make it work:
- Reinstall Windows Media Player
- Remove registry key
- Clean up old usb drivers
- re-install 100 times drivers from Verizon, Samsung. Even old versions.
- Install from Windows Update. I tried to do that 1000 times. Gosh!
- enable UMT access (mass storage) on the phone.
The only thing that worked was, for some reason , getting the drivers from a random computer that was the only computer that worked.
Windows 7 x64
Attached the files. Go to the devices manager and update the drivers.
Israel Leite
Sparrow245 said:
Ah! Finally found a solution! Not sure if this will work for everyone, but it worked for me.
1. Plug up your phone like usual. Connect with Samsung Kies. Obviously, you will get get MTP code 10 error.
2. Go to the device manager, and then uninstall the driver. Unplug your phone.
3. Go to c:\windows\system32\drivers and rename wudfrd.sys and winusb.sys to wudfrd1.sys and winusb1.sys respectively.
3. Plug your phone back in, and connect with Kies.
4. The computer will try and install the driver again, but fail.
5. Go to the device manager again, and attempt to update the driver. It should fail, and you should get a (code 28) error this time. Make sure you have a code 28 error!
6. Go back to c:\windows\system32\driver and rename the 2 files back to it's original names.
7. Go to c:\windows\inf and look for a file named wpdmtp.PNF. Take the file, and move it somewhere else (like your desktop) don't delete it.
8. Now go to the MTP usb device again, and attempt to update drivers. It should update, and recognize your device now.
This is what worked for me, I don't know if it will work for you. I'm not responsible for anything that goes wrong.
Click to expand...
Click to collapse
Thanks a ton...saved my day.
I have searched (I have 12 tabs open as I type) these forums. I see a few similar cases but I am not finding a solution. I have use CMHENDRA's guides but I am having no luck. (It is my daughters phone so I will give you what information I know) BTW, I contribute in the Note II galleries, I have rooted and flashed HTC One X, Several Nexus 7's, my Note II, Galaxy SII, Galaxy S, HTC Sensations, Nexus 4 and a few older ones. I can currently see all those phones on my laptop. Not the L9.
I believe my son tried to flash CWM for my daughter. She is notoriously rough on phones and he was trying to make sure she was protected. The phone boots into the LG Security Error screen. I can get it to boot into S/W Upgrade mode. I have completed or can complete all the steps to most of the guide. I CANNOT get my Win8.1 laptop or my sons Win7 laptop to recognize the phone to complete any of the guides. B2C, Fastboot, etc. I can see various entries in the Device Manager, I uninstall and reinstall with Driver Signing turned off. I have now reached the point where I have done so many things that I have probably confused myself.
When it did get the security error, the software had been set to USB Debugging and Unknown Sources was allowed. The firmware was 20H. B2C cannot get the phone information (I know it is probably the drivers as is everything else).
Any help, ideas, etc. would be great. I would love to be a hero for my daughter.
dsore1218 said:
I have searched (I have 12 tabs open as I type) these forums. I see a few similar cases but I am not finding a solution. I have use CMHENDRA's guides but I am having no luck. (It is my daughters phone so I will give you what information I know) BTW, I contribute in the Note II galleries, I have rooted and flashed HTC One X, Several Nexus 7's, my Note II, Galaxy SII, Galaxy S, HTC Sensations, Nexus 4 and a few older ones. I can currently see all those phones on my laptop. Not the L9.
I believe my son tried to flash CWM for my daughter. She is notoriously rough on phones and he was trying to make sure she was protected. The phone boots into the LG Security Error screen. I can get it to boot into S/W Upgrade mode. I have completed or can complete all the steps to most of the guide. I CANNOT get my Win8.1 laptop or my sons Win7 laptop to recognize the phone to complete any of the guides. B2C, Fastboot, etc. I can see various entries in the Device Manager, I uninstall and reinstall with Driver Signing turned off. I have now reached the point where I have done so many things that I have probably confused myself.
When it did get the security error, the software had been set to USB Debugging and Unknown Sources was allowed. The firmware was 20H. B2C cannot get the phone information (I know it is probably the drivers as is everything else).
Any help, ideas, etc. would be great. I would love to be a hero for my daughter.
Click to expand...
Click to collapse
I can't get mine to work either. Closest thing I've gotten is using omap4boot-for_optimus-v1.21
its different from some of the others, in that its a blue background and it doesnt actually list the p769. However, after selecting option 5, and following onscreen instructions, I was able to get my front capacitive buttons to light up, but nothing else. I can't enter S/W upgrade mode, I can't get LG recovery tool to recognise my phone, I am absolutely **** out of luck. I dont know if using omap4boot-for_optimus-v1.21 will help or hurt you, but im just explaining my experiences.
Have you installed the omap driver for fastboot?
Thanks for your replies. Windows 8.1 is installing the OMAP driver and when I try to update it, Windows says it has determined that I have the best one installed already or some BS like that. That seems to be the last piece of the puzzle. I am not getting it to use the fastboot commands and when I am in the LG upgrade thing, it cannot connect on the first of the three calls so it says to check the USB cord and connection. ( I have tried 5-6 cords including the OEM cord ).
Thanks again for your help. I will uninstall the OMAP drivers when I get home and see if I can't get the ones I downloaded to install.
I don't have Windows 8.1 so I'm not sure how to address the driver issue. I reer as wel.commend you uninstall the driver, both of them. The one under Android Phone in the device manager and the one called TI Boards in the device manager.
1. Uninstall all OMAP drives (Two of them)
2. Disconnect from the internet (to preventing Windows update from selecting its own driver.
3. Follow steps to fastboot. When connecting your phone have device manager open and right click the device that is flashing on and off (you will see the device manager refreshing and stuffs. It will dissappear after about two seconds but if you get the right click in and the option to install the driver, do it, point to the fastboot driver.
4. Disconnect phone after driver install and pull the battery.
5. Fastboot again, using option 1.
6. Quickly install same driver on the new device in device manager. Be quick.
7. Disconnect, Pull battery
8. Fastboot again
9. Flash ICS U and X
10. Make sure your LG drivers are installed.
11. Reboot PC.
12. Now you should be able to get into SW UPGRADE MODE with the plugging in of the USB
Should not lock up at 15%, make sure you have drivers installed for this.
13. Should work and reboot to home screen automatically.
14. If you really must, fastboot again and install JB U and X
dsore1218 said:
Thanks for your replies. Windows 8.1 is installing the OMAP driver and when I try to update it, Windows says it has determined that I have the best one installed already or some BS like that. That seems to be the last piece of the puzzle. I am not getting it to use the fastboot commands and when I am in the LG upgrade thing, it cannot connect on the first of the three calls so it says to check the USB cord and connection. ( I have tried 5-6 cords including the OEM cord ).
Thanks again for your help. I will uninstall the OMAP drivers when I get home and see if I can't get the ones I downloaded to install.
Click to expand...
Click to collapse
I've heard fastboot (and several other programs) aren't working on Windows 8. You need windows 7
Sent from my LGMS769 using XDA Premium 4 mobile app
Hello wise XDAers....
Ok so my goal is to get my new vs985 12b to CM12 or something cooler. So first step I need to downgrade the phone in order to root. I've been trying to follow the instructions here http://www.androidrootz.com/2014/07/how-to-unroot-lg-g3-all-variants.html?m=1 but I seem to be stuck at step 4 - getting the phone to be recognized by Windows in firmware update mode. I have tried 3 Windows 7 machines and a VM W7 machine. Granted the 3 machines are similar HP laptops. I think they are all 64 bit. I don't have a COM/LPT in the Device Managers, not after showing hidden devices and there does not seem to be a BIOS setting which affects.
In firmware update mode I've got yellow flags on CDC serial, lge android phone and vs985 4g. Are these even the right and complete list of device manager items I am to install? I'm hoping one of these I can edit to get the COM port setup? Some have said to enable debug mode or ethernet USB mode - but these options are only available in normal boot mode in the phone; I did try and turn on debug nonetheless (though it was greyed out, it did seem to check the box??) and I could not find ethernet mode. I do see some posts on the internet that others seem to lack this option, perhaps in 12b it was removed. Further it does seem that many new machines lack a COM/LPT port, so I don't know if there is a way to emulate this or if the drivers for the LG set this up? I am using the LG's dedicated usb cord and have tried multiple usb ports.
I am trying the Windows drivers available on the LG support page for the phone but there also seems to be Verizon LG drivers. Not sure if I am supposed to use one or both or if once installing it one or the other it screws things up and how you are to remove? The VZ drivers seem to be removable under "uninstall programs" but not the LG drivers. I also have been trying to get Windows update to auto install the drivers, but does not seem to work. Here are the two I have been trying:
LGUnitedMobileDriver_S51MAN313AP22_ML_WHQL_Ver_3.13.2.exe
LG_VZW_United_WHQL_v2.14.1.exe
Am I doing this all wrong? Is there an easier way? Help!
Hi, just a quick reply that's not all inclusive as I'm at work and I'm going to hurry. You don't have to bother uninstalling the regular drivers. Installing the Verizon drivers is what you need to do, and it'll be fine if you installed the other drivers first. I'll try to get back about the rest of your post later.
roirraW "edor" ehT said:
Hi, just a quick reply that's not all inclusive as I'm at work and I'm going to hurry. You don't have to bother uninstalling the regular drivers. Installing the Verizon drivers is what you need to do, and it'll be fine if you installed the other drivers first. I'll try to get back about the rest of your post later.
Click to expand...
Click to collapse
Thanks roirraW "edor" ehT! I've got the LG_VZW_United_WHQL_v2.14.1.exe installed now, so I guess the issue is in firmware update mode I've got yellow flags on CDC serial, lge android phone and vs985 4g. On my virtual machine w7 I do have a lpt/com in device manager, but none of those 3 items are in that parent item. I guess if I figure out how to install them properly, they might "go under" the lpt/com parent entry? I've tried all the USB ports and tried rebooting the phone and computer several times. Tried letting Windows update search for drivers to update (if you rmb/properties on these items with yellow flags it says the driver is not installed despite the installed Verizon drivers). Not sure what else to do.
OK! Think I figured it out! Got the right device installed with the latest Vzw driver from LGs site - seems to be version 20.
abexman said:
OK! Think I figured it out! Got the right device installed with the latest Vzw driver from LGs site - seems to be version 20.
Click to expand...
Click to collapse
Excellent! Glad to hear it. I couldn't resist coming back to try to give you more ideas (I was going to suggest rebooting with the phone unplugged, and then plug it back in). I work with VMs a lot so that aspect interested me.
Cheers!
roirraW "edor" ehT said:
Excellent! Glad to hear it. I couldn't resist coming back to try to give you more ideas (I was going to suggest rebooting with the phone unplugged, and then plug it back in). I work with VMs a lot so that aspect interested me.
Cheers!
Click to expand...
Click to collapse
Thanks mate! I am not out of the woods yet - now having an issue in the flash tool, posted here: http://forum.xda-developers.com/verizon-lg-g3/help/q-t3035198
Hi all,
I'm having some trouble with this, so I wanted to consolidate another thread into a main post. Here is my previous work. Any help would be appreciated or let me know if something doesn't make sense.
I'm using an LG Transpyre VS810PP with Android 5.1.1 currently, and a Windows 10 64-bit machine.
Put your phone in PTP mode... just found this. When it was on charge or MTP nothing would connect, but when it was in PTP adb.exe said "error: device offline", but on phone it asked if I wanted to trust the computer!!! Ohhhkay, now we're getting somewhere. Clicked trust and ran adb devices and there it is
See below... I found there are two versions of adb.exe I was using. PTP is not the problem, but adb.exe has to be the right one or it just says offline.
ALSO!! Get the newest driver pack from LG "LGMobileDriver_WHQL_Ver_4.1.1". The driver packs in the roots that I downloaded aren't new enough. After Windows got the right drivers I was able to see the COM ports properly.
I'm not sure if I have the root working currently. The "Newest root method V03" where you click on root.bat seems to pick the wrong COM port. When I try to do it manually with Send_command.exe using the other COM port it seems like the root process doesn't work properly. It eventually completes, but no info about what it did etc.
Update 2 : working on it again today and couldn't get it to connect. Ignore what I said about it needs to be in PTP mode... it does not appear that way, but if you use a certain version of adb.exe floating around it will not connect. Look for one that is around 800KB... the one I'm using is 815,104 bytes. The other is around 500KB.
It also seems to be necessary to set adb.exe to "Run as Administrator" in compatibility mode (I also set run as XP SP3 for good luck). I have also been using an elevated cmd window, so hopefully this stuff is all legit
Yesterday the device did not actually fully get rooted so I started over. I am going to try running the "root" script line by line rather than the whole thing at once because it gets stuck somewhere and there is no indication of what happened.
Click to expand...
Click to collapse
Eh, I gave up... after two full days I'm confused about why I'm even doing it... Also, coming from an iPhone, this thing is already so open lol.