Hello People !!!
Want to return your OP2 to 100% Stock Factory Image or have you soft bricked OP2 and nothing except fastboot works or you need OxygenOS fastboot images ? This is the thread for you !!
Download Fastboot Image from here :- https://mega.nz/#!itR00ZaI!gJ6T0jgqfZaIF9NLlCzWj4LIGMMhCw8m8owFdeB_2B4
Extract the Zip in a folder .
Boot the phone into fastboot.
Run the batch file.
Done.
This method WILL NOT WIPE DATA
If you want to wipe data to,flash userdata.img from here :- https://www.androidfilehost.com/?fid=24052804347833307
Use command
fastboot flash userdata userdata_64.img
Click to expand...
Click to collapse
You need the latest adb/fastboot package to be successful.For that,do this :-
Download the full Android SDK here (scroll to the bottom of the page>DOWNLOAD FOR OTHER PLATFORMS>SDK Tools Only)
Extract the zip and place the android-sdk-windows folder on your desktop.
Go into the android-sdk-windows folder and run SDK Manager.exe. Install the following packages (there are a total of 4 packages):-
Tools > Android SDK Tools, Android SDK Platform-tools- Extras > Android Support Library, Google USB Driver
Click to expand...
Click to collapse
Go back into the android-sdk-windows directory, and you should see a new folder named platform-tools. If you don't see this new folder, repeat the step above.
Thanks for reading ...
Credits :- @jcespi2005 For making the fastboot zip ... @Naman Bhalla for making the thread and partitions images thread.
Done to @jcespi2005 here :- http://forum.xda-developers.com/donatetome.php?u=281521
Donate to me here :- http://www.amazon.in/gp/registry/wishlist/1X55WMSVTW3KW/
Thanks again. !!
This method has been tested successfully by atleast 2 people ,including me
This img is oxygen os 2.1.1?
Sent from my Nexus 5 using XDA Free mobile app
matitorres07 said:
This img is oxygen os 2.1.1?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Correct
DEAD
OMG MY OPT IS DEAD... dont start just vibrate and flashing dont star...i cant went in to the recovery mode...just on fastboot HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
S0ad113 said:
OMG MY OPT IS DEAD... dont start just vibrate and flashing dont star...i cant went in to the recovery mode...just on fastboot HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
Click to expand...
Click to collapse
i've got the exact same problem. Let me guess: your bootloader is locked?
anyways, try this: press POWER + VOLUME UP until you're in fastboot mode. connect the OP2 to your PC and execute the command 'fastboot continue' in a cmd window. if not, repeat until it works. your phone should boot like normal, you can't restart or shutdown though, since you'll be stuck in the same loop again.
at least that's my problem. can't flash anything since bootloader is locked, ADB does work fine though, as long as the phone is running.
really sucks to need a PC everytime you want to power on your phone.. if anyone can help, i'd gladly appreciate it
S0ad113 said:
OMG MY OPT IS DEAD... dont start just vibrate and flashing dont star...i cant went in to the recovery mode...just on fastboot HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
Click to expand...
Click to collapse
I TRY TO USE TOOLBOX and try to flash..some via CMD But give me error writing "recover" ...Failed Remote: device is Locked. Cannot Flash images)
Helppppppp me
---------- Post added at 11:13 PM ---------- Previous post was at 11:08 PM ----------
rattig said:
i've got the exact same problem. Let me guess: Your bootloader is locked?
Anyways, try this: Press power + volume up until you're in fastboot mode. Connect the op2 to your pc and execute the command 'fastboot continue' in a cmd window. If not, repeat until it works. Your phone should boot like normal, you can't restart or shutdown though, since you'll be stuck in the same loop again.
At least that's my problem. Can't flash anything since bootloader is locked, adb does work fine though, as long as the phone is running.
Really sucks to need a pc everytime you want to power on your phone.. if anyone can help, i'd gladly appreciate it
Click to expand...
Click to collapse
i try all always locked always loop omg
---------- Post added at 11:38 PM ---------- Previous post was at 11:13 PM ----------
Helpppppppppppppppppppppppppppppppppppppppppppppppppppppppp
Please note that on the fastboot userdata command you are missing a letter. You have "fastboot flash userdata userdata_64.img" and it should be fastboot flash userdata userdata_64G.img. Great job by the way, used it to reset the OP2 and works great.
ukcain said:
Please note that on the fastboot userdata command you are missing a letter. You have "fastboot flash userdata userdata_64.img" and it should be fastboot flash userdata userdata_64G.img. Great job by the way, used it to reset the OP2 and works great.
Click to expand...
Click to collapse
I did it..but is not that the problem....the problem is..when i try to flash some...fail always. give the error : device is Locked. Cannot Flash images
REBORN
Solved ty allll
How on earth did you manage to get a fastboot image for the OP2?
Thanks by the way
Stevles said:
How on earth did you manage to get a fastboot image for the OP2?
Thanks by the way
Click to expand...
Click to collapse
Converting the .DAT inside the official recovery ZIP to .IMG format
The rest of partitions are on the fastboot format, so only system and cache needs conversion, and userdata comes from hydrogenOS fastboot package...
jcespi2005 said:
Converting the .DAT inside the official recovery ZIP to .IMG format
The rest of partitions are on the fastboot format, so only system and cache needs conversion, and userdata comes from hydrogenOS fastboot package...
Click to expand...
Click to collapse
Nice
is not flash me the file system.img
i get error message "the app crash" from windows
pls help
Zahi122 said:
is not flash me the file system.img
i get error message "the app crash" from windows
pls help
Click to expand...
Click to collapse
I'm having the same issue
I'll try to do it through TWRP and see if that works for me
Naman Bhalla said:
Hello People !!!
Want to return your OP2 to 100% Stock Factory Image or have you soft bricked OP2 and nothing except fastboot works or you need OxygenOS fastboot images ? This is the thread for you !!
Download Fastboot Image from here :- https://mega.nz/#!itR00ZaI!gJ6T0jgqfZaIF9NLlCzWj4LIGMMhCw8m8owFdeB_2B4
Click to expand...
Click to collapse
Hi,
Are these images from a Chinese, EU or US version of the device?
thanks
Hello all,
is there a new img.image?
I have great problems and need a super clean install included wipe data!!
Thanxx for helping
S5 & One + Boeffla Inside
S0ad113 said:
Solved ty allll
Click to expand...
Click to collapse
How? What did you do different? For me, the fastboot.exe stops working at the below step.
..\fastboot>fastboot flash system system.img
target reported max download size of 536870912 bytes
Invalid sparse file format at header magi
avi0889 said:
How? What did you do different? For me, the fastboot.exe stops working at the below step.
..\fastboot>fastboot flash system system.img
target reported max download size of 536870912 bytes
Invalid sparse file format at header magi
Click to expand...
Click to collapse
I got the same error at first then I copied all the files into my platform-tools dir that has ADB & fastboot then run it.
Try this tool. It works good for me. But the windows driver for OP2 and the Qualcomm Diagnostic 9006 Driver must be installed.
Sry, can`t post the link. please PN.
Worked great, but it switched my wifi off. Even if I turn it on manually it doesn't show any active networks. I have rebooted several times. Any workaround?
Related
For use on Verizon variant HTC ONE MAX only!!!
S-off users only!!!!
Software version 1.11.605.4
Stock Recovery-
http://www.androidfilehost.com/?fid=23252070760974293
flash via fastboot
fastboot flash recovery recovery.img
Stock Kernel (insecure)-
http://www.androidfilehost.com/?fid=23252070760974294
flash via fastboot
fastboot flash boot boot.img
System Image (must unrar first to get system.img)
http://www.androidfilehost.com/?fid=23252070760974295
flash via fastboot
fastboot flash system system.img
Flashable radio-
download this:
https://www.mediafire.com/?ucj15e2zavewnbq
vzw_max_radio.zip ba7f0302040731949a4db3cb0c9c4e98
double check the md5 matches above.
flash in ruu mode:
-phone in fastboot
-open cmd
-enter:
fastboot devices
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip vzw_max_radio.zip
fastboot reboot-bootloader
if you see a baseband in the bootloader screen now,thats a good sign
fastboot reboot
Credits- Scotty1223 for working his radio magic
Jiggity Janx - afh mirrors
Awesome sauce, thank you :good:
@dottat is it possible to write a script for those for the n00bs that may be the faint of heart type? Like a flash-all deal? I'm good with manually flashing them all individually but for those that aren't that would be dope.. Can you even do that with the .img's for HTC devices?
Murrda said:
@dottat is it possible to write a script for those for the n00bs that may be the faint of heart type? Like a flash-all deal? I'm good with manually flashing them all individually but for those that aren't that would be dope.. Can you even do that with the .img's for HTC devices?
Click to expand...
Click to collapse
dottat worked with the Flashify dev to get it working with the One Max. Recommend everyone use that.
HELP !!!
I tried flashing the system img, but keep on getting this error msg below. Can't do anything else but go into Custom Recovery.
error: cannot load 'system.img': Not enough space
---------- Post added at 09:27 PM ---------- Previous post was at 09:15 PM ----------
mustangmao said:
HELP !!!
I tried flashing the system img, but keep on getting this error msg below. Can't do anything else but go into Custom Recovery.
error: cannot load 'system.img': Not enough space
Click to expand...
Click to collapse
When sending boot image after i use fastboot erase boot commend, it just stuck on sending 'boot' <16384 kb> and nothing happens. Any help suggestion?
...Send boot.img when flashing boot. Send system when sending system. Can't flash system into boot partition
The boot partition is only 16 megs so if you try to flash a 2 gig file into it you'll prolly hang.
Flashing the 2gig system.img to the system partition properly will likely take some time. You have screenshots?
Sent from my HTC6600LVW using Tapatalk 4
That's exactly what i did following your instruction. Here's the steps i did (BTW: I will take screenshots as soon as i am home)
1) Went into TWRP and performed a wipe (Data, cache and system)
2) Connect MAX to PC (Win 7 64bit)
3) Go into Fastboot mode (tested using Fastboot devices and results came back with serial number)
4) Copied System and Boot img into the same folder as Fastboot/ADB
5) Issue commend: fastboot flash boot boot.img ---- Error: 1st it was stuck on sending, nothing happens for like 10 minutes, unplug then tried Run CMD with local admin, got a different error msg, this time it says FAILED (remote: not allowed)
6) Then I tried flash just system.img using fastboot flash system system.img --- got error: cannot load 'system.img': Not enough space
I then went back into TWRP, basically did a complete wipe of everything (lucky TWRP was intact), went back into Fastboot mode and did another erase.
1) Enter Fastboot mode and issued: Fastboot erase boot, recovery and system -- All went fine
2) Then tried flash individual recovery/boot/system into its partition, same error msg as above
I thought i am toast for sure, but upon rebooting, i still have TWRP and Thank God i had a Full Backup stored on my external SD card, I just did a restore and everyone is back to where i left off..
thanks for your quick response
---------- Post added at 12:29 AM ---------- Previous post was at 12:08 AM ----------
mustangmao said:
That's exactly what i did following your instruction. Here's the steps i did (BTW: I will take screenshots as soon as i am home)
1) Went into TWRP and performed a wipe (Data, cache and system)
2) Connect MAX to PC (Win 7 64bit)
3) Go into Fastboot mode (tested using Fastboot devices and results came back with serial number)
4) Copied System and Boot img into the same folder as Fastboot/ADB
5) Issue commend: fastboot flash boot boot.img ---- Error: 1st it was stuck on sending, nothing happens for like 10 minutes, unplug then tried Run CMD with local admin, got a different error msg, this time it says FAILED (remote: not allowed)
6) Then I tried flash just system.img using fastboot flash system system.img --- got error: cannot load 'system.img': Not enough space
I then went back into TWRP, basically did a complete wipe of everything (lucky TWRP was intact), went back into Fastboot mode and did another erase.
1) Enter Fastboot mode and issued: Fastboot erase boot, recovery and system -- All went fine
2) Then tried flash individual recovery/boot/system into its partition, same error msg as above
I thought i am toast for sure, but upon rebooting, i still have TWRP and Thank God i had a Full Backup stored on my external SD card, I just did a restore and everyone is back to where i left off..
thanks for your quick response
Click to expand...
Click to collapse
BTW: Reason I need to flash the Stock Rom is because my One Max has this weird charging problem, where once the phone is turned on, it only charges to 35-37% and it stops, however if I leave it powered off and charge, it charges to 100% all the way. It must be a software issue and since I am using it on AT&T, Verizon CS and retail store doesn't even want to offer at help. So, i am kinda stuck with fixing the issue myself.
mustangmao said:
That's exactly what i did following your instruction. Here's the steps i did (BTW: I will take screenshots as soon as i am home)
1) Went into TWRP and performed a wipe (Data, cache and system)
2) Connect MAX to PC (Win 7 64bit)
3) Go into Fastboot mode (tested using Fastboot devices and results came back with serial number)
4) Copied System and Boot img into the same folder as Fastboot/ADB
5) Issue commend: fastboot flash boot boot.img ---- Error: 1st it was stuck on sending, nothing happens for like 10 minutes, unplug then tried Run CMD with local admin, got a different error msg, this time it says FAILED (remote: not allowed)
6) Then I tried flash just system.img using fastboot flash system system.img --- got error: cannot load 'system.img': Not enough space
I then went back into TWRP, basically did a complete wipe of everything (lucky TWRP was intact), went back into Fastboot mode and did another erase.
1) Enter Fastboot mode and issued: Fastboot erase boot, recovery and system -- All went fine
2) Then tried flash individual recovery/boot/system into its partition, same error msg as above
I thought i am toast for sure, but upon rebooting, i still have TWRP and Thank God i had a Full Backup stored on my external SD card, I just did a restore and everyone is back to where i left off..
thanks for your quick response
---------- Post added at 12:29 AM ---------- Previous post was at 12:08 AM ----------
BTW: Reason I need to flash the Stock Rom is because my One Max has this weird charging problem, where once the phone is turned on, it only charges to 35-37% and it stops, however if I leave it powered off and charge, it charges to 100% all the way. It must be a software issue and since I am using it on AT&T, Verizon CS and retail store doesn't even want to offer at help. So, i am kinda stuck with fixing the issue myself.
Click to expand...
Click to collapse
Are you unlocked? Because remote not allowed word indicates you are not. Can you confirm?
If your kernel is what got hosed you always flash my boot.IMG using the app flashify from the market from a booted rooted rom....assuming you are unlocked. Otherwise you will have create a flashable 0p3img.zip file and flash your kernels from hboot.
Sent from my HTC6600LVW using Tapatalk 4
dottat said:
Are you unlocked? Because remote not allowed word indicates you are not. Can you confirm?
If your kernel is what got hosed you always flash my boot.IMG using the app flashify from the market from a booted rooted rom....assuming you are unlocked. Otherwise you will have create a flashable 0p3img.zip file and flash your kernels from hboot.
Sent from my HTC6600LVW using Tapatalk 4
Click to expand...
Click to collapse
Yes, i am unlocked and S-OFF and rooted.
Tried another PC and using factory HTC cable, still the same error when flashing system.
Now, if the issue is with my OS, all i need to flash is just System.img and nothing else, right?
mustangmao said:
Yes, i am unlocked and S-OFF and rooted.
Tried another PC and using factory HTC cable, still the same error when flashing system.
Now, if the issue is with my OS, all i need to flash is just System.img and nothing else, right?
Click to expand...
Click to collapse
Load flashify (free) from the app store. Copy the boot.IMG to your SD card and flash boot from that app and report back.
Sent from my Nexus 7 using Tapatalk 4
dottat said:
Load flashify (free) from the app store. Copy the boot.IMG to your SD card and flash boot from that app and report back.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Flash boot.img from SDcard, everything went fine, just rebooted the phone, no issues. Now, how do i flash the System.IMG, which is the key to hopfully solve the battery charing issue? thanks
It should be via fastboot...but your fast boot install doesn't seem to like flashing anything to your phone. Do you have any other pcs you can try and can you see if your charging issue was fixed before proceeding ?
Sent from my Nexus 7 using Tapatalk 4
dottat said:
It should be via fastboot...but your fast boot install doesn't seem to like flashing anything to your phone. Do you have any other pcs you can try and can you see if your charging issue was fixed before proceeding ?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Wow, i am amazed, just flashing the boot.img and my phone starts chargin pass 37% now while the phone is powered on. Maybe i don't need to flash system.img after all. You rocks dude, thanks so much. Keep up the good work !!!
for what its worth,ive never been able to fastboot flash system system.img ive always gotten that space error.
ive just skimmed thru this,but the easiest way7 for you guys to flash this is to just open the radio zip and add the other images to it. then you can use those directions(oem rebootRUU,etc) and flash them all in one shot.
i could work with you guys to dump the relevant images that usually come in an ruu if you want to make up a full(unsigned) ruu.
I also had the charging issue.(wouldn't charge past 37%....Switched charger and the issue is no more.
sent from my humongous VZW HTC ONE MAX
mustangmao said:
Wow, i am amazed, just flashing the boot.img and my phone starts chargin pass 37% now while the phone is powered on. Maybe i don't need to flash system.img after all. You rocks dude, thanks so much. Keep up the good work !!!
Click to expand...
Click to collapse
Sorta figured that would happen...good deal.
Sent from my HTC6600LVW using Tapatalk 4
scotty1223 said:
for what its worth,ive never been able to fastboot flash system system.img ive always gotten that space error.
ive just skimmed thru this,but the easiest way7 for you guys to flash this is to just open the radio zip and add the other images to it. then you can use those directions(oem rebootRUU,etc) and flash them all in one shot.
i could work with you guys to dump the relevant images that usually come in an ruu if you want to make up a full(unsigned) ruu.
Click to expand...
Click to collapse
Lets make that
Sent from my HTC6600LVW using Tapatalk 4
I know someone was working on decrypting the verizon ruu. He said recently he had gotten busy with some other stuff. So itbis out there and somewhat done already. Just didnt want you guys to put a lotbinto it when there may be other avenues.
Jiggity Janx said:
I know someone was working on decrypting the verizon ruu. He said recently he had gotten busy with some other stuff. So itbis out there and somewhat done already. Just didnt want you guys to put a lotbinto it when there may be other avenues.
Click to expand...
Click to collapse
Good to know, thanks for the heads up.
Jiggity Janx said:
I know someone was working on decrypting the verizon ruu. He said recently he had gotten busy with some other stuff. So itbis out there and somewhat done already. Just didnt want you guys to put a lotbinto it when there may be other avenues.
Click to expand...
Click to collapse
any idea where it is? I hadn't seen one but there's an app for decrypting
Hello everyone, I'm from Poland and I've got for two days Honor 5x with KIW-L21. I want to hide navigation bar with tutorial on this forum, so I made this steps:
1. I unlocked the bootoloader- working
2. I made the root with some spanish tutorial- working
3. The phone is working, I've checked if the root is installed properly- is ok.
4. I DON'T KNOW WHY I want to made one more facotry reset from menu.
5. After I make it the phone starts only on recovery mode.
6. I DON'T KNOW WHY I wipe all of data also with system...
So there is no os or anything on phone right now. I've downloaded the official update.app from this forum to KIW-L21, putted it to folder dload on sdcard, and when I try to install It with combination power+ volume+ + volume- system says only "Installation failed".
Also I've kicked out twrp and stock recovery is booting, and when I try to wipe data, It's also saying that is problem to wipe the data.
Please help me with some issues to made this great phone alive..
Alright, I finally unbrick the phone- I downloaded extracted rom and manually flashed it with fastboot. I've found tutorial on polish site how to do it, but there is also english version of manual if you have the same problem.
It wil be great if u could post links
@Target1920. Też mam ten problem, spójrz. Zapewne masz telefon z plusa https://youtu.be/4LbChNXHgsY (I'm the same problem)
Wysłane z mojego KIW-L21 przy użyciu Tapatalka
Can't you just replace the stock recovery with twrp via fastboot?
Of course
Wysłane z mojego KIW-L21 przy użyciu Tapatalka
my phone is bricked also .. can you write out what you did ???:fingers-crossed:
averyg said:
my phone is bricked also .. can you write out what you did ???:fingers-crossed:
Click to expand...
Click to collapse
Hello @averyg here you go:
http://forum.android.com.pl/topic/205126-instalacjaodzyskiwanie-systemu-rom-za-pomoca-fastboot/
This is the polish version of manual, I will write you how to do it:
1. Download ADB and Fastboot
2. Extract to c:/adb
3. Download from this thread firmware for you (extracted version!) http://forum.xda-developers.com/honor-5x/development/stock-kiw-l24-l21-t3312684 If you have problem what firmware you have to install, take look at the back side of phone, at the down you will se KIW-L21 or 24 (or another). Copy all files to adb folder
4. Rund adb program
5. Write in the command line: cd c:/adb
6. Connect phone to usb to download mode (power and vol- combination)
7. Write in fastboot command: fastboot flash recovery recover.img (or recovrey .img, see the file and type it name) - wait for install
8. And now: If the flash is succesfull, reboot the phone to recovery (power and volume+) and wipe all data. Phone have to work.
But if flash is not succesfull, plug again usb with download mode
9. Write this commands: fastboot flash cust cust.img -wait for install
and: fastboot flash system system.img -also wait, system.img can took a while
10. Now you will enter recovery and wipe all data
11. Again plug usb cable and install firmware with those commands:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
Now phone must run. And wipe all data after that, cause I didn't wipe and have only 800mb of free storage. After wipe everything is ok (9,6 gb). I remember when I'm flashing cust.img some errors appears, but my phone work. So don't worry when you see some. And you know, you can make it with on your own responsibility. I don't take any responsibility if something went wrong and phone will dead. But I make everything with this points and my phone work
If someone can't read this text cause my english is terrible, SORRY
honor 5x l22 bricked
can you give me solution for honor 5x kiw-L22 indian version any solution you have
ronnie arora said:
can you give me solution for honor 5x kiw-L22 indian version any solution you have
Click to expand...
Click to collapse
Hello, I think solution will be the same, but you must find stock rom for your phone.
Target1920 said:
Hello, I think solution will be the same, but you must find stock rom for your phone.
Click to expand...
Click to collapse
their is no stock rom available for l22 indian version i found the solution in xda some1 have backup stock with twrp ill try it then post soon if it work for me:angel:
averyg said:
my phone is bricked also .. can you write out what you did ???:fingers-crossed:
Click to expand...
Click to collapse
which model do you have ? kiw- ?
Target1920 said:
Hello @averyg here you go:
http://forum.android.com.pl/topic/205126-instalacjaodzyskiwanie-systemu-rom-za-pomoca-fastboot/
This is the polish version of manual, I will write you how to do it:
1. Download ADB and Fastboot
2. Extract to c:/adb
3. Download from this thread firmware for you (extracted version!) http://forum.xda-developers.com/honor-5x/development/stock-kiw-l24-l21-t3312684 If you have problem what firmware you have to install, take look at the back side of phone, at the down you will se KIW-L21 or 24 (or another). Copy all files to adb folder
4. Rund adb program
5. Write in the command line: cd c:/adb
6. Connect phone to usb to download mode (power and vol- combination)
7. Write in fastboot command: fastboot flash recovery recover.img (or recovrey .img, see the file and type it name) - wait for install
8. And now: If the flash is succesfull, reboot the phone to recovery (power and volume+) and wipe all data. Phone have to work.
But if flash is not succesfull, plug again usb with download mode
9. Write this commands: fastboot flash cust cust.img -wait for install
and: fastboot flash system system.img -also wait, system.img can took a while
10. Now you will enter recovery and wipe all data
11. Again plug usb cable and install firmware with those commands:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
Now phone must run. And wipe all data after that, cause I didn't wipe and have only 800mb of free storage. After wipe everything is ok (9,6 gb). I remember when I'm flashing cust.img some errors appears, but my phone work. So don't worry when you see some. And you know, you can make it with on your own responsibility. I don't take any responsibility if something went wrong and phone will dead. But I make everything with this points and my phone work
If someone can't read this text cause my english is terrible, SORRY
Click to expand...
Click to collapse
Thanks for your hard work.
I have problem with flashing cust and cache (Remote: Command not allowed) . My phone work, but I still see Custom version and Build number from old ROM (MoDaCo).
Does anyone have a solution, pls?
hi
i cant get into download mode and now fastboot says waiting for device
---------- Post added at 01:31 PM ---------- Previous post was at 12:32 PM ----------
ronnie arora said:
which model do you have ? kiw- ?
Click to expand...
Click to collapse
l-24
averyg said:
hi
i cant get into download mode and now fastboot says waiting for device
---------- Post added at 01:31 PM ---------- Previous post was at 12:32 PM ----------
l-24
Click to expand...
Click to collapse
To enter Fastboot of Honor 5x (KIW-L21)
Holding Volume down connect your device to PC using usb cable
ronnie arora said:
can you give me solution for honor 5x kiw-L22 indian version any solution you have
Click to expand...
Click to collapse
Download the latest firmware for your phone and extract it to get update.app.
Use Huawei update extractor to extract boot, recovery, Cust and system images.
Flash using the guide above.
Put dload folder containing update.app in SD card. Plug it into your phone and do a 3 button forced update and ypu are good to go.
averyg said:
hi
i cant get into download mode and now fastboot says waiting for device
---------- Post added at 01:31 PM ---------- Previous post was at 12:32 PM ----------
l-24
Click to expand...
Click to collapse
Try installing drivers for the 5x.
averyg said:
hi
i cant get into download mode and now fastboot says waiting for device
---------- Post added at 01:31 PM ---------- Previous post was at 12:32 PM ----------
l-24
Click to expand...
Click to collapse
On which command does it says waiting for device?
Sent from my PLK-L01 using Tapatalk
Ok I'm stuck. I was stupid and didnt make backup before flashing CM13 over stock 5.1.1. I've tried everything and now I've lost twrp (stock recovery is on) and I can't enter fastboot. I've also tried method with dload folder and 2 different update files but it keeps giving error.
Any help?
New User who doesn't know how to root and bootunlock your yureka here is the guide,
http://www.thetechnotriad.com/326/how-to-root-yu-yureka/
GUIDE TO FLASH CM 14.1 VIA TWRP
I will tell you about the twrp method which i used to flash my rom.
After flashing twrp just download the rom given in the links below this thread and save it in sd card root folder,
Boot into recovery by pressing volume up and volume down and power key,
First of all backup your current SYSTEM DATA BOOT,
then go into wipe > advance wipe then select SYSTEM, DATA, DALVIK CACHE, CACHE,
and swipe to wipe.
Then go back to twrp home and select install and select the external sd and select the rom .zip file and swipe to flash it,
Same you have to do with gapps.zip file
Then just clear DALVIK CACHE
and reboot,
It will take up some time in cm logo then it will normally start
THIS METHOD WILL ERASE ALL APPS AND DATA BUT WILL NOT MESS UP WITH YOUR INTERNAL STORAGE OR EXTERNAL.
Download Links.
Link for Rom
https://docs.google.com/uc?confirm=u9h2&export=download&id=0B8Vodzmhc0GlY0R6UHh6UldzU00
https://forum.xda-developers.com/yureka/orig-development/rom-cyanogenmod-14-0-t3457546
Link for Gapp
http://opengapps.org/
GUIDE TO FLASH VOLTE ON YU YUREKA
Download the required files given below in the links
1.Extract both the zip folder and copy the NON-HLOS.bin file to ADB folder,
2.Reboot the phone to fastboot mode.
3.Open the ADB folder Press alt + shift + right click and click on open command window here.
5.Now type or copy paste this... Code:
( fastboot -i 0x1ebf flash modem NON-HLOS.bin )
Hit Enter.
This will flash the modem files.
When it says OK disconnect the phone and reboot.
Links for Volte Modem Files,
https://uplod.ws/hmr2cvk4xwao
https://uplod.ws/hmr2cvk4xwao
NOTE :- ALL THIS METHOD ARE NOT INVENTED BY ME I JUST TRIED IT AND WAS SUCCESSFUL BY LUCK
IF YOUR MOBILE IS BRICKED YOU ARE RESPONSIBLE FOR THAT JUST TRY NOT TO DO ANYTHING WRONG.
CREDITS :-
thetechnotriad for root guide
Men_in_black007 for the links
CM team
Geekysondh for the VOLTE files and guide.
I just gave a complete method to upgrade your OS to CM 14.1 and also flashing volte
I am also a new user here but know little bit about rooting n all
if u find it helpful that's enough for me
I am not at all good in providing guidance so if any errors mistake sorry for that
If any errors u face just leave a msg sure i will help u out as even i have face 100 of errors while trying this method coz of silly mistakes i did.
sk.shehbaz said:
New User who doesn't know how to root and bootunlock your yureka here is the guide,
http://www.thetechnotriad.com/326/how-to-root-yu-yureka/
GUIDE TO FLASH CM 14.1 VIA TWRP
I will tell you about the twrp method which i used to flash my rom.
After flashing twrp just download the rom given in the links below this thread and save it in sd card root folder,
Boot into recovery by pressing volume up and volume down and power key,
First of all backup your current SYSTEM DATA BOOT,
then go into wipe > advance wipe then select SYSTEM, DATA, DALVIK CACHE, CACHE,
and swipe to wipe.
Then go back to twrp home and select install and select the external sd and select the rom .zip file and swipe to flash it,
Same you have to do with gapps.zip file
Then just clear DALVIK CACHE
and reboot,
It will take up some time in cm logo then it will normally start
THIS METHOD WILL ERASE ALL APPS AND DATA BUT WILL NOT MESS UP WITH YOUR INTERNAL STORAGE OR EXTERNAL.
Download Links.
Link for Rom
https://docs.google.com/uc?confirm=u9h2&export=download&id=0B8Vodzmhc0GlY0R6UHh6UldzU00
https://forum.xda-developers.com/yureka/orig-development/rom-cyanogenmod-14-0-t3457546
Link for Gapp
http://opengapps.org/
GUIDE TO FLASH VOLTE ON YU YUREKA
Download the required files given below in the links
1.Extract both the zip folder and copy the NON-HLOS.bin file to ADB folder,
2.Reboot the phone to fastboot mode.
3.Open the ADB folder Press alt + shift + right click and click on open command window here.
5.Now type or copy paste this... Code:
( fastboot -i 0x1ebf flash modem NON-HLOS.bin )
Hit Enter.
This will flash the modem files.
When it says OK disconnect the phone and reboot.
Links for Volte Modem Files,
https://uplod.ws/hmr2cvk4xwao
https://uplod.ws/hmr2cvk4xwao
NOTE :- ALL THIS METHOD ARE NOT INVENTED BY ME I JUST TRIED IT AND WAS SUCCESSFUL BY LUCK
IF YOUR MOBILE IS BRICKED YOU ARE RESPONSIBLE FOR THAT JUST TRY NOT TO DO ANYTHING WRONG.
CREDITS :-
thetechnotriad for root guide
Men_in_black007 for the links
CM team
Geekysondh for the VOLTE files and guide.
I just gave a complete method to upgrade your OS to CM 14.1 and also flashing volte
I am also a new user here but know little bit about rooting n all
if u find it helpful that's enough for me
I am not at all good in providing guidance so if any errors mistake sorry for that
If any errors u face just leave a msg sure i will help u out as even i have face 100 of errors while trying this method coz of silly mistakes i did.
Click to expand...
Click to collapse
Thanks alot bro successfully updated to cm 14.1 and volte method working now i can call directly from phone app no need of jio4g voice app thanks alot
can someone guide me how to unlock bootloader on mac via terminal
i cant seem to unlock bootloader & thus everything else fails.
& now its stuck on bootlogo..
./fastboot-mac -i 0x1ebf devices (give me no response)
./fastboot-mac -i 0x1ebf oem unlock (says OKAY - but i dont think its unlocked)
Then i did :
Advanced reboot – turn it ON
Update Cyanogen recovery – turn it OFF
Android debugging – turn it ON
Now, turn off your phone.
then i did this :
./fastboot-mac -i 0x1ebf flash recovery yu-twrp-recoveryx64.img
after this i cannot boot into recovery. the bootlogo is stuck & if i press vol+ & vol- & power, it jusst keep rebooting.
now just stuck on YU bootlogo..
i can get into fastboot mode only & from fastboot, i can do this :
./fastboot-mac -i 0x1ebf boot recovery-yu.img
this brings me to cynogen recovery 6 & from there i did a wipe everything but no custom rom can be installed... all show errors, obviously, cause theres not root.
HELP !!
NOW, i'm stuck on boot logo..
cant do anything.
How should i revert back to everything stock & start all over again/
i have access to fast boot & 1 time boot recovery at a time
hypermaster said:
NOW, i'm stuck on boot logo..
cant do anything.
How should i revert back to everything stock & start all over again/
i have access to fast boot & 1 time boot recovery at a time
Click to expand...
Click to collapse
Kindly Share me your model no. And details of your mobile
sk.shehbaz said:
Kindly Share me your model no. And details of your mobile
Click to expand...
Click to collapse
YU YUREKA AO5510
Stuck on YU Boot Logo...
cant do anything, even if i 1 time boot to CM 6 & try to install the factory OS, it fails of shows aborted.
I Just want to go back to Stock & then try again clean.
& If i try to install official ROM after data wipe & system wipe, i get the below error :
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
& with cm-11.0-XNPH05Q-tomato-signed-fastboot.zip
EOCD not found, not Zip
error: failed to access zipdata in 'Qu/?^?`??????z?????Y\f?f"??=????????6??o??????m`????Ќ
??????E??z???Q??ō?m??Óo??[?????iG????7C'H?纛E??zU?JϞ?'
i now have access to a windows 10 laptop also apart from a mac
I tried you steps but when I place call phone restarts and goes into bootloop
from fastboot on my mac i did this :
./fastboot-mac -i 0x1ebf boot recovery-yu.img
(Booted into CM 6 for this 1 time only)
Wiped everything
tried to install : QuarkOS™-v3.0-Stable_YUREKA.zip
Surprisingly, this installed & i did a REBOOT, but now again, its been stuck on YU Boot logo.
jatintomar said:
I tried you steps but when I place call phone restarts and goes into bootloop
Click to expand...
Click to collapse
Wipe the mobile completely then first install your OS then flash the VOLTE files and see there on fastboot if any error pops up and let me know when you are entering the commands to flash VOLTE what exactly is there on fastboot showing.
hypermaster said:
YU YUREKA AO5510
Stuck on YU Boot Logo...
cant do anything, even if i 1 time boot to CM 6 & try to install the factory OS, it fails of shows aborted.
I Just want to go back to Stock & then try again clean.
& If i try to install official ROM after data wipe & system wipe, i get the below error :
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
& with cm-11.0-XNPH05Q-tomato-signed-fastboot.zip
EOCD not found, not Zip
error: failed to access zipdata in 'Qu/?^?`??????z?????Y\f?f"??=????????6??o??????m`????Ќ
??????E??z???Q??ō?m??Óo??[?????iG????7C'H?纛E??zU?JϞ?'
i now have access to a windows 10 laptop also apart from a mac
Click to expand...
Click to collapse
Windows 10 okk install Pda drivers first of all then adb and fastboot and ill post u link to flash it via fastboot coz windows 10 doesn't support normal drivers and doesn't flash the device i have faced this issue on my laptop then i flash it from my p.c which is win 7 there it was successful and yeah install stock version of yureka ill share links for you okk
hypermaster said:
from fastboot on my mac i did this :
./fastboot-mac -i 0x1ebf boot recovery-yu.img
(Booted into CM 6 for this 1 time only)
Wiped everything
tried to install : QuarkOS™-v3.0-Stable_YUREKA.zip
Surprisingly, this installed & i did a REBOOT, but now again, its been stuck on YU Boot logo.
Click to expand...
Click to collapse
https://m.youtube.com/watch?v=t5G42isjf68
Follow the tutorial and first uninstall each and every drivers from windows and then start the procedure again.
And quote me so I'll get a notification of your reply.
hypermaster said:
from fastboot on my mac i did this :
./fastboot-mac -i 0x1ebf boot recovery-yu.img
(Booted into CM 6 for this 1 time only)
Wiped everything
tried to install : QuarkOS™-v3.0-Stable_YUREKA.zip
Surprisingly, this installed & i did a REBOOT, but now again, its been stuck on YU Boot logo.
Click to expand...
Click to collapse
https://m.youtube.com/watch?v=t5G42isjf68
Follow this steps bro and yeah first uninstall each n every drivers from your windows then start the whole procedure again.
Update me soon will be waiting for your reply
sk.shehbaz said:
Windows 10 okk install Pda drivers first of all then adb and fastboot and ill post u link to flash it via fastboot coz windows 10 doesn't support normal drivers and doesn't flash the device i have faced this issue on my laptop then i flash it from my p.c which is win 7 there it was successful and yeah install stock version of yureka ill share links for you okk
Click to expand...
Click to collapse
Thanks a lot..
i downloaded & entered fastboot mode & did this :
factory-image-flash-tools-windows-flashtools
Flash-all.bat
This installed all boot.img, system, userdata,modem,bootloader, slb1, tz, aboot - All went well, then it said disconnect device & reboot.
Now, its not booting, no fastboot mode also, no recovery mode also.
now, its completely dead... nothings coming on now....
Just putting it for charging for awhile now, lets see if something comes up.
Just noticed. Device manager (windows 10) does not detect anything, when i connect USB to laptop.. only the red light shows now.
hypermaster said:
Thanks a lot..
i downloaded & entered fastboot mode & did this :
factory-image-flash-tools-windows-flashtools
Flash-all.bat
This installed all boot.img, system, userdata,modem,bootloader, slb1, tz, aboot - All went well, then it said disconnect device & reboot.
Now, its not booting, no fastboot mode also, no recovery mode also.
now, its completely dead... nothings coming on now....
Just putting it for charging for awhile now, lets see if something comes up.
Just noticed. Device manager (windows 10) does not detect anything, when i connect USB to laptop.. only the red light shows now.
Click to expand...
Click to collapse
Did you install the drivers first Coz Pda drivers are the only one which detects my yureka in fastboot mode on windows 10
hypermaster said:
Thanks a lot..
i downloaded & entered fastboot mode & did this :
factory-image-flash-tools-windows-flashtools
Flash-all.bat
This installed all boot.img, system, userdata,modem,bootloader, slb1, tz, aboot - All went well, then it said disconnect device & reboot.
Now, its not booting, no fastboot mode also, no recovery mode also.
now, its completely dead... nothings coming on now....
Just putting it for charging for awhile now, lets see if something comes up.
Just noticed. Device manager (windows 10) does not detect anything, when i connect USB to laptop.. only the red light shows now.
Click to expand...
Click to collapse
And yeah i have given you a link so you can follow the tutorial as per the video it will be better if you follow that.
sk.shehbaz said:
And yeah i have given you a link so you can follow the tutorial as per the video it will be better if you follow that.
Click to expand...
Click to collapse
Thanks so much.
Yes i have pdanet installed.
in cmd prompt, it used to detect the devices also.
But now after flashing all orginal rom files, its now dead, i dont even have fastboot more now ?
Now, i cant even get into fastboot mode...
---------- Post added at 10:55 AM ---------- Previous post was at 10:32 AM ----------
hypermaster said:
Thanks so much.
Yes i have pdanet installed.
in cmd prompt, it used to detect the devices also.
But now after flashing all orginal rom files, its now dead, i dont even have fastboot more now ?
Now, i cant even get into fastboot mode...
Click to expand...
Click to collapse
I THINK I HAVE HARD BRICKED MY YUREKA - Theres no Fastboot also.
Now, i need someone who can Unbrick a hardbricked yureka with emmc memory card system
Anyone in Mumbai who can do this for me ?
hypermaster said:
Thanks so much.
Yes i have pdanet installed.
in cmd prompt, it used to detect the devices also.
But now after flashing all orginal rom files, its now dead, i dont even have fastboot more now ?
Now, i cant even get into fastboot mode...
---------- Post added at 10:55 AM ---------- Previous post was at 10:32 AM ----------
I THINK I HAVE HARD BRICKED MY YUREKA - Theres no Fastboot also.
Now, i need someone who can Unbrick a hardbricked yureka with emmc memory card system
Anyone in Mumbai who can do this for me ?
Click to expand...
Click to collapse
Message me in PM bro we will sort it out bdw m also Mumbaikar
Inspired by this thread!
Dumped via non-flashed (only live booted) TWRP so I can dump the original recovery too.
Can be flashed in fastboot mode!
To flash these images reboot your watch, swipe from the top left to the bottom right corner when you see the ASUS logo and connect it to your PC.
Then in a command line enter:
Optional (wipes the device): fastboot -w
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
Neat All-In-One Backup Document: DropBox Paper
Downloads:
ALL-IN-ONE zip (system.img, boot.img, recovery.img): Dropbox (269MB) - OneDrive Backup
recovery.img: Dropbox (16 384KB) - OneDrive Backup
boot.img: Dropbox (16 384KB) - OneDrive Backup
MD5 Hashes:
sparrow_601_M6E70C_170505.zip: 34745B23F9ED2FD5DCBB6189EA7011A9
recovery.img: 7B33DE51549919AB5DA700B425978BB4
boot.img: 051FF5BAA13B3EB34B0E5DD818ACC167
If you need more partitions tell me below, I've only included these ones so far because I know they won't contain any personal or device specific information and should be flashable on other devices too. However I've dumped every single one existing on the ZW2
ok i ve flashed every single file and also did a wipe before, now i get stuck in the boot screen, before it i was on the 7.x rom from this forum. do u have any idea how to solve this problem? i got the WI501Q
Lecani said:
ok i ve flashed every single file and also did a wipe before, now i get stuck in the boot screen, before it i was on the 7.x rom from this forum. do u have any idea how to solve this problem? i got the WI501Q
Click to expand...
Click to collapse
Seas!
Did you do "fastboot -w"? That'll wipe all userdata. Then flash the images.
EpicLPer said:
Seas!
Did you do "fastboot -w"? That'll wipe all userdata. Then flash the images.
Click to expand...
Click to collapse
Seas
Yes, I did. but now I'm stuck in the bootscreen. :/
Lecani said:
Seas
Yes, I did. but now I'm stuck in the bootscreen. :/
Click to expand...
Click to collapse
Did you get any error message while flashing? And is your bootloader unlocked?
EpicLPer said:
Did you get any error message while flashing? And is your bootloader unlocked?
Click to expand...
Click to collapse
No I didn't get a single one, and yes it is. :/
Guess if I could install the TWRP and flash this on the watch, would this be possible?
Lecani said:
No I didn't get a single one, and yes it is. :/
Click to expand...
Click to collapse
You have to unlock your bootloader first.
EpicLPer said:
You have to unlock your bootloader first.
Click to expand...
Click to collapse
Yea, the bootloader was every single time i tried to install this one unlocked, before flashing, after wiping.. again and again.. always stuck on bootscreen. The only thing i can see is the ASUS logo with some other things, but no boot.
Lecani said:
Yea, the bootloader was every single time i tried to install this one unlocked, before flashing, after wiping.. again and again.. always stuck on bootscreen. The only thing i can see is the ASUS logo with some other things, but no boot.
Click to expand...
Click to collapse
Why would you want to relock your bootloader anyways?
Unlock it now, format via -w, flash boot, recovery and system and then try to boot the watch.
EpicLPer said:
Why would you want to relock your bootloader anyways?
Unlock it now, format via -w, flash boot, recovery and system and then try to boot the watch.
Click to expand...
Click to collapse
Exactly that is what i ve done several times right now.. without any succsess.. I ve never relocked the bootloader. I ll send you what i ve done per PM.
EpicLPer said:
Inspired by this thread!
Dumped via non-flashed (only live booted) TWRP so I can dump the original recovery too.
Can be flashed in fastboot mode!
To flash these images reboot your watch, swipe from the top left to the bottom right corner when you see the ASUS logo and connect it to your PC.
Then in a command line enter:
Optional (wipes the device): fastboot -w
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
Neat All-In-One Backup Document: DropBox Paper
Downloads:
ALL-IN-ONE zip (system.img, boot.img, recovery.img): Dropbox (269MB)
recovery.img: Dropbox (16 384KB)
boot.img: Dropbox (16 384KB)
MD5 Hashes:
sparrow_601_M6E70C_170505.zip: 34745B23F9ED2FD5DCBB6189EA7011A9
recovery.img: 7B33DE51549919AB5DA700B425978BB4
boot.img: 051FF5BAA13B3EB34B0E5DD818ACC167
If you need more partitions tell me below, I've only included these ones so far because I know they won't contain any personal or device specific information and should be flashable on other devices too. However I've dumped every single one existing on the ZW2
Click to expand...
Click to collapse
THANKS!! worked PERFECTLY!!
relock bootloader
EpicLPer said:
Why would you want to relock your bootloader anyways?
Unlock it now, format via -w, flash boot, recovery and system and then try to boot the watch.
Click to expand...
Click to collapse
i relocked my bootloader because i taught that is the problem why my update everytime fails but i think i have the wrong recovery why it wont update
---------- Post added at 05:58 AM ---------- Previous post was at 05:44 AM ----------
keep it up!
What must be noted if one of WebWear 2.0 again on stock if the AW 2.0 update comes? Bootloader is Open ?
SirusX said:
What must be noted if one of WebWear 2.0 again on stock if the AW 2.0 update comes? Bootloader is Open ?
Click to expand...
Click to collapse
Just flash the in post 1 mentioned images and wait, you don't have to close the bootloader.
The ZenWatch is the first watch that I flash, I keep stock in the Fastboot mode!, How do I solve this
Property of WebWear 2.0 according to your instructions flasht and now stands the Stock Asus Screen
Your command fastboot flash system system.img is wrong it must be fastboot flash system.simg
Since I still had an old WebWear 2.0 system.img in the folder it came to the Bootscreen Stock
SirusX said:
Property of WebWear 2.0 according to your instructions flasht and now stands the Stock Asus Screen
Since I still had an old WebWear 2.0 system.img in the folder it came to the Bootscreen Stock
Click to expand...
Click to collapse
I found out there is are two type's of ZenWatch2 I have the wren version
Is it for the Big Version of Zenwatch 2
Gesendet von iPhone mit Tapatalk Pro
SirusX said:
Is it for the Big Version of Zenwatch 2
Click to expand...
Click to collapse
Yes is for the big version (Sparrow)
---------- Post added at 03:22 PM ---------- Previous post was at 03:17 PM ----------
I did the process of flashing the images given in the OP and all worked fine . Just to add , I did fastboot oem unlock first, then fastboot -w, and then followed the instructions given in the OP.
All worked just fine and I'm back to AW 1 .5.
Cheers.
Cannot Load "system.img" Error
Can someone please help me downgrade back to 1.5? I'm seriously so mad that I'm about to throw my Zenwatch 2 in the garbage. Two days of trying to do this and nothing. I'm good until I get to the "fastboot flash system system.img" command line. I'm keep getting an error saying cannot load "system.img". I'm so angry I can barely see straight. Can someone please offer some guidance?
Update: I found the problem. I was so mad that I realized that I just kept entering "fastboot flash system system.img" instead of "fastboot flash system system.simg". All good now thankfully.
Please read carefully it is different from other cases..
I just got my new phone and it is Honor 5x, I set it up normally as you do on any new phone before using it. I had not done anything else at this point but follow the directions given and the phone was behaving fine. There was a software update and I started it, but then when it went to reboot, it stayed frozen at the Honor logo screen. I have tried various things and looked everywhere. I tried going to the Emui menu and I tried the "factory reset" option and it got up to 15% before saying that it failed, forcing me to shut it down. No matter how many times I try to reboot the phone, it stays at that same logo screen. If I press the volume keys and the power button, it takes me to the download screen but does not pass 0 . I have tried to manually install the update by the use of an SD card. When I tried it after I mounted it on the card, it got to maybe 10% before saying the software update failed and forced me to shut the phone down again. When I tried recovering from the erecovery menu, after connecting to my wifi, it said it failed to get package info and again I had to shutdown the phone. I tried redownloading the update and doing it again incase it somehow downloaded wrong on my laptop but it still has done no change. The farthest I got was when I put the update on the SD card before it failed. I need a solution please help me it's been days and i havent found something yet
Lasisi said:
Please read carefully it is different from other cases..
I just got my new phone and it is Honor 5x, I set it up normally as you do on any new phone before using it. I had not done anything else at this point but follow the directions given and the phone was behaving fine. There was a software update and I started it, but then when it went to reboot, it stayed frozen at the Honor logo screen. I have tried various things and looked everywhere. I tried going to the Emui menu and I tried the "factory reset" option and it got up to 15% before saying that it failed, forcing me to shut it down. No matter how many times I try to reboot the phone, it stays at that same logo screen. If I press the volume keys and the power button, it takes me to the download screen but does not pass 0 . I have tried to manually install the update by the use of an SD card. When I tried it after I mounted it on the card, it got to maybe 10% before saying the software update failed and forced me to shut the phone down again. When I tried recovering from the erecovery menu, after connecting to my wifi, it said it failed to get package info and again I had to shutdown the phone. I tried redownloading the update and doing it again incase it somehow downloaded wrong on my laptop but it still has done no change. The farthest I got was when I put the update on the SD card before it failed. I need a solution please help me it's been days and i havent found something yet
Click to expand...
Click to collapse
Well I have no idea how much experience you have with Honor phones but you do realize that their are no less than 6 varent of this phone
Are you sure your downloading the correct files for your model?
Are you using the dload/update.app method to update?
Did you unlock the bootloader?
Flash TWRP?
Sent from my LEX727 using Tapatalk
try booting into huawei erecovery and pressing "flash latest firmware and recovery"
clsA said:
Well I have no idea how much experience you have with Honor phones but you do realize that their are no less than 6 varent of this phone
Are you sure your downloading the correct files for your model?
Are you using the dload/update.app method to update?
Did you unlock the bootloader?
Flash TWRP?
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
This is actually my first time with huawei devices but i made sure i downloaded the right firmware no result!!
Also unlocking the boot loader asks for stuffs such as build no device id etc but i dont know how to do this because the phone isnt booting up
About flashing twrp I have no idea what this is about but i think it also has something to do with unlocking bootloader which i am unable to do without getting the phone to boot to homepage
Thanks for d reply how else can you help me pls!!
Abhaypraseeth said:
try booting into huawei erecovery and pressing "flash latest firmware and recovery"
Click to expand...
Click to collapse
I understand booting into erecovery but i dont understand pressing flash latest firmware and recovery please expanciate. Thanks
Lasisi said:
I understand booting into erecovery but i dont understand pressing flash latest firmware and recovery please expanciate. Thanks
Click to expand...
Click to collapse
i mean to say this see the attachment you see the second option that is the one to click and then it will ask to connect to wifi and then it will start downloading (aprox 10mins) and then install the latest firmware and recovery (be warned this will wipe your device and upgrade to latest version and you will lose root and twrp:good
Abhaypraseeth said:
i mean to say this see the attachment you see the second option that is the one to click and then it will ask to connect to wifi and then it will start downloading (aprox 10mins) and then install the latest firmware and recovery (be warned this will wipe your device and upgrade to latest version and you will lose root and twrp:good
Click to expand...
Click to collapse
he said he already tried that
When I tried recovering from the erecovery menu, after connecting to my wifi, it said it failed to get package info and again I had to shutdown the phone.
Click to expand...
Click to collapse
@Lasisi list your phone model and the file your trying to use (a link)
Also list what software version you were on and what the update is listed as
are you putting the file update.app in a folder called dload on the ext_sdcard and rebooting to erecovery by shutting off the phone and then holding volume up and down and power all at the same time ?
Abhaypraseeth said:
i mean to say this see the attachment you see the second option that is the one to click and then it will ask to connect to wifi and then it will start downloading (aprox 10mins) and then install the latest firmware and recovery (be warned this will wipe your device and upgrade to latest version and you will lose root and twrp:good
Click to expand...
Click to collapse
Yea... I have done this too and I was able to connect to wifi but when it is about to start downloading it will say failed to get package info instead of downloading it.
Someone said probably the os has crashed and non of this will work...
clsA said:
he said he already tried that
@Lasisi list your phone model and the file your trying to use (a link)
Also list what software version you were on and what the update is listed as
are you putting the file update.app in a folder called dload on the ext_sdcard and rebooting to erecovery by shutting off the phone and then holding volume up and down and power all at the same time ?
Click to expand...
Click to collapse
Yes i am putting it in dload and rebooting by holding the volume buttons(both)...
My phone model is Honor 5x
The file i was trying to use comes from http://consumer.huawei.com/pk/support/mobile-phones/honor5x-pk-sup.htm
Did i get your question right??
I was told the os of the phone is crashed and all these wont work.. Is there still something else that can be done
Lasisi said:
Yes i am putting it in dload and rebooting by holding the volume buttons(both)...
My phone model is Honor 5x
The file i was trying to use comes from http://consumer.huawei.com/pk/support/mobile-phones/honor5x-pk-sup.htm
Did i get your question right??
Click to expand...
Click to collapse
Dear Lasisi WHICH model of honor 5x do you have (eg KIW-TL00,KIW-TL00H)
---------- Post added at 04:40 PM ---------- Previous post was at 04:40 PM ----------
Lasisi said:
Yes i am putting it in dload and rebooting by holding the volume buttons(both)...
My phone model is Honor 5x
The file i was trying to use comes from http://consumer.huawei.com/pk/support/mobile-phones/honor5x-pk-sup.htm
Did i get your question right??
Click to expand...
Click to collapse
Please tell and I'll fetch the files for you if I can..
Lasisi said:
Yes i am putting it in dload and rebooting by holding the volume buttons(both)...
My phone model is Honor 5x
The file i was trying to use comes from http://consumer.huawei.com/pk/support/mobile-phones/honor5x-pk-sup.htm
Did i get your question right??
Click to expand...
Click to collapse
This site links to the KIW-L21 is that your phone ?
the file you download from their is a zip file ..are you unzipping it before putting update.app in the dload folder ?
Lasisi said:
I was told the os of the phone is crashed and all these wont work.. Is there still something else that can be done
Click to expand...
Click to collapse
is your phone C185 B130, Kuwait, Channel-Others
or C185 B310 CUST C185 D006
Abhaypraseeth said:
Dear Lasisi WHICH model of honor 5x do you have (eg KIW-TL00,KIW-TL00H)
---------- Post added at 04:40 PM ---------- Previous post was at 04:40 PM ----------
Please tell and I'll fetch the files for you if I can..
Click to expand...
Click to collapse
Okay... It is KIW-L21 model
clsA said:
This site links to the KIW-L21 is that your phone ?
the file you download from their is a zip file ..are you unzipping it before putting update.app in the dload folder ?
is your phone C185 B130, Kuwait, Channel-Others
or C185 B310 CUST C185 D006
Click to expand...
Click to collapse
Yes my phone is KIW-L21... I unzipped it before putting in dload... The phone was bought from china thats all i know i *dont know anything* about this C185 B1330
Lasisi said:
Okay... It is KIW-L21 model
Click to expand...
Click to collapse
Ok I'll get you the link just wait for 30 minutes
Lasisi said:
Okay... It is KIW-L21 model
Click to expand...
Click to collapse
Download this- https://www.androidfilehost.com/?fid=24411628330025755
Get 15 second ADB installer https://forum.xda-developers.com/showthread.php?t=2588979
Extract it
COPY THE
BOOT.IMG
BOOT.IMG.HEADER
SYSTEM.IMG
SYSTEM.IMG.HEADER
RECOVERY.IMG
RECOVERY.IMG.HEADER
CUST.IMG
CUST.IMG.HEADER
To the adb folder in your C: drive
Then open CMD and type in
Code:
cd C:\adb
Then
Turn off your phone.
Connect it to your PC via the USB cable.
Hold down Volume Down and Power to boot into Fastboot mode.
Check if your device is connected via the fastboot devices command.
If it is, then flash the BOOT.IMG file entering
Code:
fastboot flash boot BOOT.IMG
Next, flash the RECOVERY.IMG by typing:
Code:
fastboot flash recovery RECOVERY.IMG
After that, flash the SYSTEM.IMG with the
Code:
fastboot flash system SYSTEM.IMG
command. *
Lastly, flash the CUST.IMG by typing
Code:
fastboot flash cust CUST.IMG
If all the flashing is done, restart your phone with the
Code:
fastboot restart command
* – Since the SYSTEM and CUST file are much more larger than the other two, the program will flash them in parts. It may seem like the program is frozen, but it’s chopping up the large files into smaller ones in order to flash them. You can check the Process Manager, and see the HDD usage of this process.
Abhaypraseeth said:
Download this- https://www.androidfilehost.com/?fid=24411628330025755
Get 15 second ADB installer https://forum.xda-developers.com/showthread.php?t=2588979
Extract it
COPY THE
BOOT.IMG
BOOT.IMG.HEADER
SYSTEM.IMG
SYSTEM.IMG.HEADER
RECOVERY.IMG
RECOVERY.IMG.HEADER
CUST.IMG
CUST.IMG.HEADER
To the adb folder in your C: drive
Then open CMD and type in
Code:
cd C:\adb
Then
Turn off your phone.
Connect it to your PC via the USB cable.
Hold down Volume Down and Power to boot into Fastboot mode.
Check if your device is connected via the fastboot devices command.
If it is, then flash the BOOT.IMG file entering
Code:
fastboot flash boot BOOT.IMG
Next, flash the RECOVERY.IMG by typing:
Code:
fastboot flash recovery RECOVERY.IMG
After that, flash the SYSTEM.IMG with the
Code:
fastboot flash system SYSTEM.IMG
command. *
Lastly, flash the CUST.IMG by typing
Code:
fastboot flash cust CUST.IMG
If all the flashing is done, restart your phone with the
Code:
fastboot restart command
* – Since the SYSTEM and CUST file are much more larger than the other two, the program will flash them in parts. It may seem like the program is frozen, but it’s chopping up the large files into smaller ones in order to flash them. You can check the Process Manager, and see the HDD usage of this process.
Click to expand...
Click to collapse
I know your just trying to help, but those files are Very Old .. most likely his phone is already on android 6
you also don't know if he has C185 or C432
I think a "fastboot getvar all" from the bootloader should tell if he's on C185 or C432
then you need to download one of the 2 files above and use Huawei update extractor to pull the files from the Full update package for Android 6
and use those to try and recover the phone.
clsA said:
Download this- https://www.androidfilehost.com/?fid=24411628330025755
Get 15 second ADB installer https://forum.xda-developers.com/showthread.php?t=2588979
Extract it
COPY THE
BOOT.IMG
BOOT.IMG.HEADER
SYSTEM.IMG
SYSTEM.IMG.HEADER
RECOVERY.IMG
RECOVERY.IMG.HEADER
CUST.IMG
CUST.IMG.HEADER
To the adb folder in your C: drive
Then open CMD and type in
Then
Turn off your phone.
Connect it to your PC via the USB cable.
Hold down Volume Down and Power to boot into Fastboot mode.
Check if your device is connected via the fastboot devices command.
If it is, then flash the BOOT.IMG file entering
Next, flash the RECOVERY.IMG by typing:
After that, flash the SYSTEM.IMG with the
command. *
Lastly, flash the CUST.IMG by typing
If all the flashing is done, restart your phone with the
I know your just trying to help, but those files are Very Old .. most likely his phone is already on android 6
you also don't know if he has C185 or C432
I think a "fastboot getvar all" from the bootloader should tell if he's on C185 or C432
then you need to download one of the 2 files above and use Huawei update extractor to pull the files from the Full update package for Android 6
and use those to try and recover the phone.
Click to expand...
Click to collapse
True
Some real help going on guys.. great to see the detailed instructions for new user.
@Abhaypraseeth and @clsA
shashank1320 said:
Some real help going on guys.. great to see the detailed instructions for new user.
@Abhaypraseeth and @clsA
Click to expand...
Click to collapse
Thanks