New User who doesn't know how to root and bootunlock your yureka here is the guide,
http://www.thetechnotriad.com/326/how-to-root-yu-yureka/
GUIDE TO FLASH CM 14.1 VIA TWRP
I will tell you about the twrp method which i used to flash my rom.
After flashing twrp just download the rom given in the links below this thread and save it in sd card root folder,
Boot into recovery by pressing volume up and volume down and power key,
First of all backup your current SYSTEM DATA BOOT,
then go into wipe > advance wipe then select SYSTEM, DATA, DALVIK CACHE, CACHE,
and swipe to wipe.
Then go back to twrp home and select install and select the external sd and select the rom .zip file and swipe to flash it,
Same you have to do with gapps.zip file
Then just clear DALVIK CACHE
and reboot,
It will take up some time in cm logo then it will normally start
THIS METHOD WILL ERASE ALL APPS AND DATA BUT WILL NOT MESS UP WITH YOUR INTERNAL STORAGE OR EXTERNAL.
Download Links.
Link for Rom
https://docs.google.com/uc?confirm=u9h2&export=download&id=0B8Vodzmhc0GlY0R6UHh6UldzU00
https://forum.xda-developers.com/yureka/orig-development/rom-cyanogenmod-14-0-t3457546
Link for Gapp
http://opengapps.org/
GUIDE TO FLASH VOLTE ON YU YUREKA
Download the required files given below in the links
1.Extract both the zip folder and copy the NON-HLOS.bin file to ADB folder,
2.Reboot the phone to fastboot mode.
3.Open the ADB folder Press alt + shift + right click and click on open command window here.
5.Now type or copy paste this... Code:
( fastboot -i 0x1ebf flash modem NON-HLOS.bin )
Hit Enter.
This will flash the modem files.
When it says OK disconnect the phone and reboot.
Links for Volte Modem Files,
https://uplod.ws/hmr2cvk4xwao
https://uplod.ws/hmr2cvk4xwao
NOTE :- ALL THIS METHOD ARE NOT INVENTED BY ME I JUST TRIED IT AND WAS SUCCESSFUL BY LUCK
IF YOUR MOBILE IS BRICKED YOU ARE RESPONSIBLE FOR THAT JUST TRY NOT TO DO ANYTHING WRONG.
CREDITS :-
thetechnotriad for root guide
Men_in_black007 for the links
CM team
Geekysondh for the VOLTE files and guide.
I just gave a complete method to upgrade your OS to CM 14.1 and also flashing volte
I am also a new user here but know little bit about rooting n all
if u find it helpful that's enough for me
I am not at all good in providing guidance so if any errors mistake sorry for that
If any errors u face just leave a msg sure i will help u out as even i have face 100 of errors while trying this method coz of silly mistakes i did.
sk.shehbaz said:
New User who doesn't know how to root and bootunlock your yureka here is the guide,
http://www.thetechnotriad.com/326/how-to-root-yu-yureka/
GUIDE TO FLASH CM 14.1 VIA TWRP
I will tell you about the twrp method which i used to flash my rom.
After flashing twrp just download the rom given in the links below this thread and save it in sd card root folder,
Boot into recovery by pressing volume up and volume down and power key,
First of all backup your current SYSTEM DATA BOOT,
then go into wipe > advance wipe then select SYSTEM, DATA, DALVIK CACHE, CACHE,
and swipe to wipe.
Then go back to twrp home and select install and select the external sd and select the rom .zip file and swipe to flash it,
Same you have to do with gapps.zip file
Then just clear DALVIK CACHE
and reboot,
It will take up some time in cm logo then it will normally start
THIS METHOD WILL ERASE ALL APPS AND DATA BUT WILL NOT MESS UP WITH YOUR INTERNAL STORAGE OR EXTERNAL.
Download Links.
Link for Rom
https://docs.google.com/uc?confirm=u9h2&export=download&id=0B8Vodzmhc0GlY0R6UHh6UldzU00
https://forum.xda-developers.com/yureka/orig-development/rom-cyanogenmod-14-0-t3457546
Link for Gapp
http://opengapps.org/
GUIDE TO FLASH VOLTE ON YU YUREKA
Download the required files given below in the links
1.Extract both the zip folder and copy the NON-HLOS.bin file to ADB folder,
2.Reboot the phone to fastboot mode.
3.Open the ADB folder Press alt + shift + right click and click on open command window here.
5.Now type or copy paste this... Code:
( fastboot -i 0x1ebf flash modem NON-HLOS.bin )
Hit Enter.
This will flash the modem files.
When it says OK disconnect the phone and reboot.
Links for Volte Modem Files,
https://uplod.ws/hmr2cvk4xwao
https://uplod.ws/hmr2cvk4xwao
NOTE :- ALL THIS METHOD ARE NOT INVENTED BY ME I JUST TRIED IT AND WAS SUCCESSFUL BY LUCK
IF YOUR MOBILE IS BRICKED YOU ARE RESPONSIBLE FOR THAT JUST TRY NOT TO DO ANYTHING WRONG.
CREDITS :-
thetechnotriad for root guide
Men_in_black007 for the links
CM team
Geekysondh for the VOLTE files and guide.
I just gave a complete method to upgrade your OS to CM 14.1 and also flashing volte
I am also a new user here but know little bit about rooting n all
if u find it helpful that's enough for me
I am not at all good in providing guidance so if any errors mistake sorry for that
If any errors u face just leave a msg sure i will help u out as even i have face 100 of errors while trying this method coz of silly mistakes i did.
Click to expand...
Click to collapse
Thanks alot bro successfully updated to cm 14.1 and volte method working now i can call directly from phone app no need of jio4g voice app thanks alot
can someone guide me how to unlock bootloader on mac via terminal
i cant seem to unlock bootloader & thus everything else fails.
& now its stuck on bootlogo..
./fastboot-mac -i 0x1ebf devices (give me no response)
./fastboot-mac -i 0x1ebf oem unlock (says OKAY - but i dont think its unlocked)
Then i did :
Advanced reboot – turn it ON
Update Cyanogen recovery – turn it OFF
Android debugging – turn it ON
Now, turn off your phone.
then i did this :
./fastboot-mac -i 0x1ebf flash recovery yu-twrp-recoveryx64.img
after this i cannot boot into recovery. the bootlogo is stuck & if i press vol+ & vol- & power, it jusst keep rebooting.
now just stuck on YU bootlogo..
i can get into fastboot mode only & from fastboot, i can do this :
./fastboot-mac -i 0x1ebf boot recovery-yu.img
this brings me to cynogen recovery 6 & from there i did a wipe everything but no custom rom can be installed... all show errors, obviously, cause theres not root.
HELP !!
NOW, i'm stuck on boot logo..
cant do anything.
How should i revert back to everything stock & start all over again/
i have access to fast boot & 1 time boot recovery at a time
hypermaster said:
NOW, i'm stuck on boot logo..
cant do anything.
How should i revert back to everything stock & start all over again/
i have access to fast boot & 1 time boot recovery at a time
Click to expand...
Click to collapse
Kindly Share me your model no. And details of your mobile
sk.shehbaz said:
Kindly Share me your model no. And details of your mobile
Click to expand...
Click to collapse
YU YUREKA AO5510
Stuck on YU Boot Logo...
cant do anything, even if i 1 time boot to CM 6 & try to install the factory OS, it fails of shows aborted.
I Just want to go back to Stock & then try again clean.
& If i try to install official ROM after data wipe & system wipe, i get the below error :
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
& with cm-11.0-XNPH05Q-tomato-signed-fastboot.zip
EOCD not found, not Zip
error: failed to access zipdata in 'Qu/?^?`??????z?????Y\f?f"??=????????6??o??????m`????Ќ
??????E??z???Q??ō?m??Óo??[?????iG????7C'H?纛E??zU?JϞ?'
i now have access to a windows 10 laptop also apart from a mac
I tried you steps but when I place call phone restarts and goes into bootloop
from fastboot on my mac i did this :
./fastboot-mac -i 0x1ebf boot recovery-yu.img
(Booted into CM 6 for this 1 time only)
Wiped everything
tried to install : QuarkOS™-v3.0-Stable_YUREKA.zip
Surprisingly, this installed & i did a REBOOT, but now again, its been stuck on YU Boot logo.
jatintomar said:
I tried you steps but when I place call phone restarts and goes into bootloop
Click to expand...
Click to collapse
Wipe the mobile completely then first install your OS then flash the VOLTE files and see there on fastboot if any error pops up and let me know when you are entering the commands to flash VOLTE what exactly is there on fastboot showing.
hypermaster said:
YU YUREKA AO5510
Stuck on YU Boot Logo...
cant do anything, even if i 1 time boot to CM 6 & try to install the factory OS, it fails of shows aborted.
I Just want to go back to Stock & then try again clean.
& If i try to install official ROM after data wipe & system wipe, i get the below error :
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
& with cm-11.0-XNPH05Q-tomato-signed-fastboot.zip
EOCD not found, not Zip
error: failed to access zipdata in 'Qu/?^?`??????z?????Y\f?f"??=????????6??o??????m`????Ќ
??????E??z???Q??ō?m??Óo??[?????iG????7C'H?纛E??zU?JϞ?'
i now have access to a windows 10 laptop also apart from a mac
Click to expand...
Click to collapse
Windows 10 okk install Pda drivers first of all then adb and fastboot and ill post u link to flash it via fastboot coz windows 10 doesn't support normal drivers and doesn't flash the device i have faced this issue on my laptop then i flash it from my p.c which is win 7 there it was successful and yeah install stock version of yureka ill share links for you okk
hypermaster said:
from fastboot on my mac i did this :
./fastboot-mac -i 0x1ebf boot recovery-yu.img
(Booted into CM 6 for this 1 time only)
Wiped everything
tried to install : QuarkOS™-v3.0-Stable_YUREKA.zip
Surprisingly, this installed & i did a REBOOT, but now again, its been stuck on YU Boot logo.
Click to expand...
Click to collapse
https://m.youtube.com/watch?v=t5G42isjf68
Follow the tutorial and first uninstall each and every drivers from windows and then start the procedure again.
And quote me so I'll get a notification of your reply.
hypermaster said:
from fastboot on my mac i did this :
./fastboot-mac -i 0x1ebf boot recovery-yu.img
(Booted into CM 6 for this 1 time only)
Wiped everything
tried to install : QuarkOS™-v3.0-Stable_YUREKA.zip
Surprisingly, this installed & i did a REBOOT, but now again, its been stuck on YU Boot logo.
Click to expand...
Click to collapse
https://m.youtube.com/watch?v=t5G42isjf68
Follow this steps bro and yeah first uninstall each n every drivers from your windows then start the whole procedure again.
Update me soon will be waiting for your reply
sk.shehbaz said:
Windows 10 okk install Pda drivers first of all then adb and fastboot and ill post u link to flash it via fastboot coz windows 10 doesn't support normal drivers and doesn't flash the device i have faced this issue on my laptop then i flash it from my p.c which is win 7 there it was successful and yeah install stock version of yureka ill share links for you okk
Click to expand...
Click to collapse
Thanks a lot..
i downloaded & entered fastboot mode & did this :
factory-image-flash-tools-windows-flashtools
Flash-all.bat
This installed all boot.img, system, userdata,modem,bootloader, slb1, tz, aboot - All went well, then it said disconnect device & reboot.
Now, its not booting, no fastboot mode also, no recovery mode also.
now, its completely dead... nothings coming on now....
Just putting it for charging for awhile now, lets see if something comes up.
Just noticed. Device manager (windows 10) does not detect anything, when i connect USB to laptop.. only the red light shows now.
hypermaster said:
Thanks a lot..
i downloaded & entered fastboot mode & did this :
factory-image-flash-tools-windows-flashtools
Flash-all.bat
This installed all boot.img, system, userdata,modem,bootloader, slb1, tz, aboot - All went well, then it said disconnect device & reboot.
Now, its not booting, no fastboot mode also, no recovery mode also.
now, its completely dead... nothings coming on now....
Just putting it for charging for awhile now, lets see if something comes up.
Just noticed. Device manager (windows 10) does not detect anything, when i connect USB to laptop.. only the red light shows now.
Click to expand...
Click to collapse
Did you install the drivers first Coz Pda drivers are the only one which detects my yureka in fastboot mode on windows 10
hypermaster said:
Thanks a lot..
i downloaded & entered fastboot mode & did this :
factory-image-flash-tools-windows-flashtools
Flash-all.bat
This installed all boot.img, system, userdata,modem,bootloader, slb1, tz, aboot - All went well, then it said disconnect device & reboot.
Now, its not booting, no fastboot mode also, no recovery mode also.
now, its completely dead... nothings coming on now....
Just putting it for charging for awhile now, lets see if something comes up.
Just noticed. Device manager (windows 10) does not detect anything, when i connect USB to laptop.. only the red light shows now.
Click to expand...
Click to collapse
And yeah i have given you a link so you can follow the tutorial as per the video it will be better if you follow that.
sk.shehbaz said:
And yeah i have given you a link so you can follow the tutorial as per the video it will be better if you follow that.
Click to expand...
Click to collapse
Thanks so much.
Yes i have pdanet installed.
in cmd prompt, it used to detect the devices also.
But now after flashing all orginal rom files, its now dead, i dont even have fastboot more now ?
Now, i cant even get into fastboot mode...
---------- Post added at 10:55 AM ---------- Previous post was at 10:32 AM ----------
hypermaster said:
Thanks so much.
Yes i have pdanet installed.
in cmd prompt, it used to detect the devices also.
But now after flashing all orginal rom files, its now dead, i dont even have fastboot more now ?
Now, i cant even get into fastboot mode...
Click to expand...
Click to collapse
I THINK I HAVE HARD BRICKED MY YUREKA - Theres no Fastboot also.
Now, i need someone who can Unbrick a hardbricked yureka with emmc memory card system
Anyone in Mumbai who can do this for me ?
hypermaster said:
Thanks so much.
Yes i have pdanet installed.
in cmd prompt, it used to detect the devices also.
But now after flashing all orginal rom files, its now dead, i dont even have fastboot more now ?
Now, i cant even get into fastboot mode...
---------- Post added at 10:55 AM ---------- Previous post was at 10:32 AM ----------
I THINK I HAVE HARD BRICKED MY YUREKA - Theres no Fastboot also.
Now, i need someone who can Unbrick a hardbricked yureka with emmc memory card system
Anyone in Mumbai who can do this for me ?
Click to expand...
Click to collapse
Message me in PM bro we will sort it out bdw m also Mumbaikar
Related
Did you get the message: Magic Value Mismatch:-.-.-.-.-.-?!
After flashing a new recovery it happens sometimes.
GREEN ZONE
Are you able to go to the recocery menu(power + vol up)? If not, go to BLUE ZONE. If yes, follow these steps
1. check whether you have copied your rom as "update.zip" to your SD card's root directory
2. Go to recovery menu and install update.zip
BLUE ZONE
You may did something wrong while flashing a new recovery. Here is the right method:
1. go back to fastboot mode(power+power+power+vol up) and type these commands on your PC
2. fastboot erase userdata
3. fastboot erase system
4. fastboot erase cache
5. fastboot erase linux
6. fastboot erase recovery
7. fastboot flash recovery recovery.img (change path, if recovery.img is not in the same directory as fastboot.exe)
8. fastboot reboot
Are you able now to go to the recovery menu? If yes, go to GREEN ZONE and follow steps. If not, go to ORANGE ZONE.
ORANGE ZONE
Are able to unpack the update.zip and find the system.img and boot.img files? If not, then go to RED ZONE. If yes, copy these 2 files to the directory where the fastboot.exe is, run these commands:
1. fastboot erase recovery
2. fastboot flash recovery recovery.img
3. fastboot -w
4. fastboot erase linux
5. fastboot erase system
6. fastboot flash system system.img
7. fastboot flash linux boot.img
8. fastboot reboot
ROM is installed. Enjoy it!
RED ZONE
Make sure, that you copied the same recovery.img to fastboot folder, that you had flashed before to your tablet.
Type this command in recovery mode:
1. fastboot boot recovery.img
This command will run the recovery from your PC. After the recovery menu is booted, go to GREEN ZONE and enjoy your ROM!
If this was helpful to you, please do not hesitate to click on Thanks!
Lol, nice to see my post copy/pasted without any links indicated. Anyway, I hope It's helpful for ppl.
Tried following these steps, however, I'm still getting this error... followed this thread
http://forum.xda-developers.com/showthread.php?t=1470823
installed recovery successfully (via fastboot), and update seems to install fine, until I reboot and get the "Magic Value Mismatch" again..
Any ideas?
yellowumbrella said:
Tried following these steps, however, I'm still getting this error... followed this thread
http://forum.xda-developers.com/showthread.php?t=1470823
installed recovery successfully (via fastboot), and update seems to install fine, until I reboot and get the "Magic Value Mismatch" again..
Any ideas?
Click to expand...
Click to collapse
So you installed the recovery via fastboot. Did you manage to boot into recovery mode?
I had that issue, that I couldn't boot into recovery mod from my Folio, by pressing power+Up button. Thats why I added the RED ZONE method. Its like booting recovery from your PC. (fastboot boot recovery.img). All the times I wanna upgrade my current ROM, I have to do this step, because the power+up does not work, and the Folio skips booting in recovery and wanna do normal booting. However there is no Rom installed on machine, so I get the magic value mismatch message.
So try to boot recovery from your PC, but be sure you have copied to your fastboot folder the same recovery, that you flashed onto the tablet.
I hope it was helpful. If something is not clear, feel free to ask.
Hi there, thanks for the answer.
I am able to install recovery images via fastboot.
Device is showing up as a question mark with >fastboot devices
but recovery installs fine. CWM gives a series of e: can't opne/mount /cache errors.
Foliomod 1.4 installs no problem, thanks to the method here
http://forum.xda-developers.com/showthread.php?t=1458876
yellowumbrella said:
Hi there, thanks for the answer.
I am able to install recovery images via fastboot.
Device is showing up as a question mark with >fastboot devices
but recovery installs fine. CWM gives a series of e: can't opne/mount /cache errors.
Foliomod 1.4 installs no problem, thanks to the method here
http://forum.xda-developers.com/showthread.php?t=1458876
Click to expand...
Click to collapse
Are you able to wipe cache from recovery? And what else errors are listed?
One more thing, try to flash your boot.img and system.img via fastboot as written above.
If I follow this
http://forum.xda-developers.com/showthread.php?t=1458876
and let it install cwm v 3, I get the cache error and cannot wipe or mount via recovery.
If I follow the ICS thread, and flash the new cwm v5 via fastboot, I don't get the cache error, but the rom simply won't start. If I open the package, there is a boot.img, but not a system.img, just a system folder...
I could try flashing boot.img, but I don't see how that could help
yellowumbrella said:
If I follow this
http://forum.xda-developers.com/showthread.php?t=1458876
and let it install cwm v 3, I get the cache error and cannot wipe or mount via recovery.
If I follow the ICS thread, and flash the new cwm v5 via fastboot, I don't get the cache error, but the rom simply won't start. If I open the package, there is a boot.img, but not a system.img, just a system folder...
I could try flashing boot.img, but I don't see how that could help
Click to expand...
Click to collapse
Well just to see it clear. So you are able to install Foliomod 1.4, so your Internal storage is not broken.
When I get home, I will check the system folder of ICS rom. There are some method to create system.img from an unpacked folder...
So, in CWM 5.5.0.4 you manage to install Zip from SD card, ROM and GAPPS as well, but the Rom does not boot?!
yup, that's exactly it.
Haven't tried installing Gapps since I can't even get the rom to boot.
I have a perfectly working tablet with foliomod 1.4, and I did get honeycomb to run but some apps crashed so I reverted back to foliomod.
with CWM CWM 5.5.0.4 everything seems to work great, except at reboot, nothing happens (somehow, I no longer even get the magic value mismatch)
------------------
PS. not sure if this is at all relevant, but I cannot fastboot from win7, I'm fastbooting in either ubuntu or xp via VirtualBox, and the device, when calling >fastboot devices shows up as ?????????? (ubuntu) and ? (xp)... :\
yellowumbrella said:
yup, that's exactly it.
Haven't tried installing Gapps since I can't even get the rom to boot.
I have a perfectly working tablet with foliomod 1.4, and I did get honeycomb to run but some apps crashed so I reverted back to foliomod.
with CWM CWM 5.5.0.4 everything seems to work great, except at reboot, nothing happens (somehow, I no longer even get the magic value mismatch)
------------------
PS. not sure if this is at all relevant, but I cannot fastboot from win7, I'm fastbooting in either ubuntu or xp via VirtualBox, and the device, when calling >fastboot devices shows up as ?????????? (ubuntu) and ? (xp)... :\
Click to expand...
Click to collapse
Try to install gapps as well. Maybe it helps...
nope, no luck even with gapps installed..
just a blank screen..
sigh
yellowumbrella said:
nope, no luck even with gapps installed..
just a blank screen..
sigh
Click to expand...
Click to collapse
Have you tried all the roms? ICS Alpha 1,2,3 and 4?
Tried 3 and 4, didn't bother trying earlier ones, as it seems the latest ones work for most users
yellowumbrella said:
nope, no luck even with gapps installed..
just a blank screen..
sigh
Click to expand...
Click to collapse
Hmmm strange. I ask it for you on developers forum. What you can still do, is to check the steps, that you did them correctly. In most of the cases users forget something, or do some steps incorrectly.
Try to erase userdata, cache, system, linux and recovery in fastboot. You mentioned you had problem with fastboot under Win7. Problem may occur, in case of not proper erasing.
Thanks, I'll give it another try tonight.
Fastboot in win7 is simply not seeing the device. It shows up in XP and Ubuntu, but as "??????" - not sure if that could be a symptom.
I'll post a reply as soon as I've tried, and let you know how it went.
yellowumbrella said:
Thanks, I'll give it another try tonight.
Fastboot in win7 is simply not seeing the device. It shows up in XP and Ubuntu, but as "??????" - not sure if that could be a symptom.
I'll post a reply as soon as I've tried, and let you know how it went.
Click to expand...
Click to collapse
For me it works perfectly on Win7. After Installing SDK and JDK the in the devicemanager it is shown as an Unknown device. Simply add the driver manually to it.
Download driver from attachment.
Copy it to SDK\USB_driver folder
That works for me. After its done, the Folio is shown as "Fastboot" in device manager. But connect the tablet in fastboot mode to your PC before you add driver manually to it.
Thanks for that.
Tried it, still not working in win7. It shows up correctly in device manager, but fastboot itself just doesn't want to see it...
I've attached a screenshot for you
EDIT: screenshot gets resized, but it shows device manager listing
NVIDIA Android Fastboot Device
and a terminal with fastboot not seeing the device
yellowumbrella said:
Thanks for that.
Tried it, still not working in win7. It shows up correctly in device manager, but fastboot itself just doesn't want to see it...
I've attached a screenshot for you
EDIT: screenshot gets resized, but it shows device manager listing
NVIDIA Android Fastboot Device
and a terminal with fastboot not seeing the device
Click to expand...
Click to collapse
When You have win7, You have run the console as admin!
Or copy the complete Fastboot folder to another Destination like c:\temp...
Thanks stefannsv, tried it, still not showing...
But I can access fastboot on another platform, so I assume it's not an issue, I can just switch over to another OS to flash
no go, followed both this original post (tried all steps except orange, cause the rom I'm trying to install has a system folder, not a system.img)
Last method I tried was:
1) boot into fastboot
2) boot cwm-recovery-5.5.0.4.img directly from PC
3) wipe data/factory reset
4) wipe cache partition
5) install zip from SD card and chose the alpha 4 release
installing update...
then back to recovery, reboot and voilà... magic value mismatch again (it had disappeared for a while... )
Also, when booting into CWM 3.0.0.5, I get a series of "E: Can't mount/cache/recovery" type errors.. could this be related?
booting directly into recovery from PC doesn't alllow me to install any ROMS, not even foliomod 1.4 which works if using puppet13th's method
Hello People !!!
Want to return your OP2 to 100% Stock Factory Image or have you soft bricked OP2 and nothing except fastboot works or you need OxygenOS fastboot images ? This is the thread for you !!
Download Fastboot Image from here :- https://mega.nz/#!itR00ZaI!gJ6T0jgqfZaIF9NLlCzWj4LIGMMhCw8m8owFdeB_2B4
Extract the Zip in a folder .
Boot the phone into fastboot.
Run the batch file.
Done.
This method WILL NOT WIPE DATA
If you want to wipe data to,flash userdata.img from here :- https://www.androidfilehost.com/?fid=24052804347833307
Use command
fastboot flash userdata userdata_64.img
Click to expand...
Click to collapse
You need the latest adb/fastboot package to be successful.For that,do this :-
Download the full Android SDK here (scroll to the bottom of the page>DOWNLOAD FOR OTHER PLATFORMS>SDK Tools Only)
Extract the zip and place the android-sdk-windows folder on your desktop.
Go into the android-sdk-windows folder and run SDK Manager.exe. Install the following packages (there are a total of 4 packages):-
Tools > Android SDK Tools, Android SDK Platform-tools- Extras > Android Support Library, Google USB Driver
Click to expand...
Click to collapse
Go back into the android-sdk-windows directory, and you should see a new folder named platform-tools. If you don't see this new folder, repeat the step above.
Thanks for reading ...
Credits :- @jcespi2005 For making the fastboot zip ... @Naman Bhalla for making the thread and partitions images thread.
Done to @jcespi2005 here :- http://forum.xda-developers.com/donatetome.php?u=281521
Donate to me here :- http://www.amazon.in/gp/registry/wishlist/1X55WMSVTW3KW/
Thanks again. !!
This method has been tested successfully by atleast 2 people ,including me
This img is oxygen os 2.1.1?
Sent from my Nexus 5 using XDA Free mobile app
matitorres07 said:
This img is oxygen os 2.1.1?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Correct
DEAD
OMG MY OPT IS DEAD... dont start just vibrate and flashing dont star...i cant went in to the recovery mode...just on fastboot HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
S0ad113 said:
OMG MY OPT IS DEAD... dont start just vibrate and flashing dont star...i cant went in to the recovery mode...just on fastboot HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
Click to expand...
Click to collapse
i've got the exact same problem. Let me guess: your bootloader is locked?
anyways, try this: press POWER + VOLUME UP until you're in fastboot mode. connect the OP2 to your PC and execute the command 'fastboot continue' in a cmd window. if not, repeat until it works. your phone should boot like normal, you can't restart or shutdown though, since you'll be stuck in the same loop again.
at least that's my problem. can't flash anything since bootloader is locked, ADB does work fine though, as long as the phone is running.
really sucks to need a PC everytime you want to power on your phone.. if anyone can help, i'd gladly appreciate it
S0ad113 said:
OMG MY OPT IS DEAD... dont start just vibrate and flashing dont star...i cant went in to the recovery mode...just on fastboot HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
Click to expand...
Click to collapse
I TRY TO USE TOOLBOX and try to flash..some via CMD But give me error writing "recover" ...Failed Remote: device is Locked. Cannot Flash images)
Helppppppp me
---------- Post added at 11:13 PM ---------- Previous post was at 11:08 PM ----------
rattig said:
i've got the exact same problem. Let me guess: Your bootloader is locked?
Anyways, try this: Press power + volume up until you're in fastboot mode. Connect the op2 to your pc and execute the command 'fastboot continue' in a cmd window. If not, repeat until it works. Your phone should boot like normal, you can't restart or shutdown though, since you'll be stuck in the same loop again.
At least that's my problem. Can't flash anything since bootloader is locked, adb does work fine though, as long as the phone is running.
Really sucks to need a pc everytime you want to power on your phone.. if anyone can help, i'd gladly appreciate it
Click to expand...
Click to collapse
i try all always locked always loop omg
---------- Post added at 11:38 PM ---------- Previous post was at 11:13 PM ----------
Helpppppppppppppppppppppppppppppppppppppppppppppppppppppppp
Please note that on the fastboot userdata command you are missing a letter. You have "fastboot flash userdata userdata_64.img" and it should be fastboot flash userdata userdata_64G.img. Great job by the way, used it to reset the OP2 and works great.
ukcain said:
Please note that on the fastboot userdata command you are missing a letter. You have "fastboot flash userdata userdata_64.img" and it should be fastboot flash userdata userdata_64G.img. Great job by the way, used it to reset the OP2 and works great.
Click to expand...
Click to collapse
I did it..but is not that the problem....the problem is..when i try to flash some...fail always. give the error : device is Locked. Cannot Flash images
REBORN
Solved ty allll
How on earth did you manage to get a fastboot image for the OP2?
Thanks by the way
Stevles said:
How on earth did you manage to get a fastboot image for the OP2?
Thanks by the way
Click to expand...
Click to collapse
Converting the .DAT inside the official recovery ZIP to .IMG format
The rest of partitions are on the fastboot format, so only system and cache needs conversion, and userdata comes from hydrogenOS fastboot package...
jcespi2005 said:
Converting the .DAT inside the official recovery ZIP to .IMG format
The rest of partitions are on the fastboot format, so only system and cache needs conversion, and userdata comes from hydrogenOS fastboot package...
Click to expand...
Click to collapse
Nice
is not flash me the file system.img
i get error message "the app crash" from windows
pls help
Zahi122 said:
is not flash me the file system.img
i get error message "the app crash" from windows
pls help
Click to expand...
Click to collapse
I'm having the same issue
I'll try to do it through TWRP and see if that works for me
Naman Bhalla said:
Hello People !!!
Want to return your OP2 to 100% Stock Factory Image or have you soft bricked OP2 and nothing except fastboot works or you need OxygenOS fastboot images ? This is the thread for you !!
Download Fastboot Image from here :- https://mega.nz/#!itR00ZaI!gJ6T0jgqfZaIF9NLlCzWj4LIGMMhCw8m8owFdeB_2B4
Click to expand...
Click to collapse
Hi,
Are these images from a Chinese, EU or US version of the device?
thanks
Hello all,
is there a new img.image?
I have great problems and need a super clean install included wipe data!!
Thanxx for helping
S5 & One + Boeffla Inside
S0ad113 said:
Solved ty allll
Click to expand...
Click to collapse
How? What did you do different? For me, the fastboot.exe stops working at the below step.
..\fastboot>fastboot flash system system.img
target reported max download size of 536870912 bytes
Invalid sparse file format at header magi
avi0889 said:
How? What did you do different? For me, the fastboot.exe stops working at the below step.
..\fastboot>fastboot flash system system.img
target reported max download size of 536870912 bytes
Invalid sparse file format at header magi
Click to expand...
Click to collapse
I got the same error at first then I copied all the files into my platform-tools dir that has ADB & fastboot then run it.
Try this tool. It works good for me. But the windows driver for OP2 and the Qualcomm Diagnostic 9006 Driver must be installed.
Sry, can`t post the link. please PN.
Worked great, but it switched my wifi off. Even if I turn it on manually it doesn't show any active networks. I have rebooted several times. Any workaround?
Hello, fellow Android hackers.
Short: I am trying to install CM on a L21, but fail booting into TWRP (getting only stock recovery).
What I did, working with a brand-new phone:
Unlock bootloader.
Flash TWRP 3.0.2.
Boot to TWRP. It worked.
Try flashing CM, which failed due to some failed assert. Googling revealed a thread on these forums which suggested I had to do a stock update to Marshmallow first.
Downloaded the update through EMUI's updater.
The updater booted to TWRP which aborted the installation because of a failed zip signature check.
I disabled signature checking and ran the installation again. It succeeded.
Tried to directly install CM over it. I got the error message stating I couldn't flash on top of incompatible data.
At this point, I probably should just have wiped system and flash CM, but for some reason I decided to boot to stock.
Here is where it all seems to have gone wrong.
Try to flash and boot to TWRP, like in steps 13 to 18.
Push the B340 UPDATE.APP to /sdcard/dload.
Start the phone using power + vol down + vol up.
I have verified that the phone is on B340 and the builtin updater won't find further updates.
(I have repeated this step and the following ones countless times.)
Boot to bootloader and flash TWRP. Yes, the command succeeds.
Code:
…$ sudo fastboot flash recovery twrp-3.0.2-0-kiwi.img
target reported max download size of 266338304 bytes
sending 'recovery' (45202 KB)...
OKAY [ 1.418s]
writing 'recovery'...
OKAY [ 0.641s]
finished. total time: 2.059s
fastboot reboot
adb reboot recovery # boots to stock recovery
Boot to bootloader and flash TWRP.
Hold power + vol up
I read that the duration holding the keys matters, so I tried this very often, but I always got to one of two different stock recoveries.
Factory reset and cache wipe with one of the two stock recoveries.
I also considered crushing the phone on the wall on multiple occasions, but then decided it would not help me with my goal.
Okay.
L21 with B340, how u boot to TWRP? -_-
Also, the two stock recoveries have the menu options "Download latest version and recovery, Reboot, Shutdown" and "Reboot, Wipe data/factory reset, Wipe cache partition".
I humbly thank everyone in advance who might have some contributions to share.
ok . as i understand ,
First Charge Ur Phone Up To 50%+
Second : Go Back To Stock L 5.0.1
Third : download The latest Nightly Version OF CM + Recovery Rom | Recovey
Forth : Flash Recovery Only Throw ADB if u got any error please Attach here if success Go to step 5
Fifth : Shut Down And HOLD Volume-up + Power As soon u see Honor logo Release Power But Keep Volume Rocked Pressed !
Last : Install The Cm After U already copy To SD Card .
Gd Luck ! .
i will presume that you are on stock recovery,
now go to honor 5x repository and download b320 firmware
now place it in dload folder and flash
now boot to bootlader and try flashing twrp
then do not directly boot to revovery
just do fastboot reboot
then now do adb reboot recovery
youl be with twrp and forst things first ,compulsarily do a backup
then now assuming that you have transfered layest cm to sd card,
first goto wipe , then select all except internal and external sd cards , then wipe
now install, you should be good to go,
i had your issue when i was on b34p, but b320 is a great base and supports all custom roms..try it
(I am sorry for not answering sooner, but I have a lot on my plate right now. :/ )
Thanks for the replies.
Romiui said:
ok . as i understand ,
First Charge Ur Phone Up To 50%+
Second : Go Back To Stock L 5.0.1
Third : download The latest Nightly Version OF CM + Recovery Rom | Recovey
Forth : Flash Recovery Only Throw ADB if u got any error please Attach here if success Go to step 5
Fifth : Shut Down And HOLD Volume-up + Power As soon u see Honor logo Release Power But Keep Volume Rocked Pressed !
Last : Install The Cm After U already copy To SD Card .
Gd Luck ! .
Click to expand...
Click to collapse
2: As I understood it I only had to upgrade to M in the first place to be able to install CM. The downgrade will not undo whatever happened there?
3: I am not sure that I understand what you're trying to say, but I know of no way to flash recoveries via ADB. The point is that, as posted in the OP, flash via fastboot allegedly succeeds and as soon as I boot to the recovery, I'm back to stock.
thilak devraj said:
i will presume that you are on stock recovery,
now go to honor 5x repository and download b320 firmware
now place it in dload folder and flash
now boot to bootlader and try flashing twrp
then do not directly boot to revovery
just do fastboot reboot
then now do adb reboot recovery
youl be with twrp and forst things first ,compulsarily do a backup
then now assuming that you have transfered layest cm to sd card,
first goto wipe , then select all except internal and external sd cards , then wipe
now install, you should be good to go,
i had your issue when i was on b340, but b320 is a great base and supports all custom roms..try it
Click to expand...
Click to collapse
Thanks. I actually tried the dload method with B140 after writing this post, but it doesn't seem to work—same with B330 (the repo doesn't contain a B320 for L21). As far as I can tell, the dload install appears pretends to work fine: I'm getting a successful archive verification, an install meter and no error message. But the OS is not replaced.
I am uncertain if I need an actual microSD card—different sources seem to suggest different things here—but I generally would assume that, if there was no valid image in the right place, I would be getting an error message.
I am fine with whatever suggestion that wouldn't result in a brick. Data loss is fine, there's nothing on it.
A dumb question but do you disconnect the phone from PC or Mac after flashing twrp, firing fastboot reboot and quickly press power and vol up to boot to twrp.
If you already did that, try unlocking command once more and then try flashing it...
You can also try
Fastboot boot twrp_kiwi.img
To boot directly to twrp without flashing.
Hope any of it works.
ksdug said:
(I am sorry for not answering sooner, but I have a lot on my plate right now. :/ )
Thanks for the replies.
but I know of no way to flash recoveries via ADB.
D
Click to expand...
Click to collapse
All recoveries can be Flashed throw Fast-boot ADB Boss .
ksdug said:
(I am sorry for not answering sooner, but I have a lot on my plate right now. :/ )
Thanks for the replies.
2: As I understood it I only had to upgrade to M in the first place to be able to install CM. The downgrade will not undo whatever happened there?
3: I am not sure that I understand what you're trying to say, but I know of no way to flash recoveries via ADB. The point is that, as posted in the OP, flash via fastboot allegedly succeeds and as soon as I boot to the recovery, I'm back to stock.
Thanks. I actually tried the dload method with B140 after writing this post, but it doesn't seem to work—same with B330 (the repo doesn't contain a B320 for L21). As far as I can tell, the dload install appears to work fine: I'm getting a successful archive verification, an install meter and no error message. But the OS is not replaced.
I am uncertain if I need an actual microSD card—different sources seem to suggest different things here—but I generally would assume that, if there was no valid image in the right place, I would be getting an error message.
I am fine with whatever suggestion that wouldn't result in a brick. Data loss is fine, there's nothing on it.
Click to expand...
Click to collapse
glad you did it
thilak devraj said:
glad you did it
Click to expand...
Click to collapse
I rephrased that part as it was unclear. I didn't manage to pull off a downgrade.
muradulislam said:
A dumb question but do you disconnect the phone from PC or Mac after flashing twrp, firing fastboot reboot and quickly press power and vol up to boot to twrp.
If you already did that, try unlocking command once more and then try flashing it...
Click to expand...
Click to collapse
I did, but to no avail. Reunlocking had no effect either.
muradulislam said:
You can also try
Fastboot boot twrp_kiwi.img
To boot directly to twrp without flashing.
Hope any of it works.
Click to expand...
Click to collapse
I love you. I had totally forgotten about that. Using the boot command I managed to install CM, but I still cannot replace the stock recovery. Maybe I'll try letting CM write its own recovery with its next update, but I guess I'll leave it at that. The only downside is that my dad now needs me for doing updates. :/
Thanks very much.
ksdug said:
I rephrased that part as it was unclear. I didn't manage to pull off a downgrade.
I did, but to no avail. Reunlocking had no effect either.
I love you. I had totally forgotten about that. Using the boot command I managed to install CM, but I still cannot replace the stock recovery. Maybe I'll try letting CM write its own recovery with its next update, but I guess I'll leave it at that. The only downside is that my dad now needs me for doing updates. :/
Thanks very much.
Click to expand...
Click to collapse
wait......
you couldnt make it?? ok right now were are you at??
how to boot Honor 5x into TWRP
I know this is an old post, but since I tried for nearly a week to get my Honor 5x to boot in TWRP when pushing volume up + power button, I just wanted to post how I finally got it working, just in case anyone else should have the same problem...
1. First, I downloaded the latest stock rom. On my Honor 5x Android 5 (Lollipop) was installed, so I downloaded an Android 6 (marshmallow) stock rom. Make sure to get the correct version for your region (e.g. C432 for Europe). I found the correct rom file by simply googeling. If you are in a boot loop or do not have a working android on your phone, read instructions below.
2. I un-zipped the rom file and copied the update.app to my sd card to folder "dload"
3. I booted regularly into Android and started the update installation from the settings, where I could select option to install from SD card.
4. once that was done, i enabled USB debugging in developer tools and booted into TWRP from ADB with command
fastboot boot twrp-3.1.0-0-kiwi.img
5. Then, I installed SuperSu (SuperSU-v2.82-201705271822.zip)
6. Then, I flahed TWRP directly FROM TWRP. To do so, I clicked "Install" button, clicked "Install Image" and then selected TWRP file (which i copied to my SD card earlier). BE CAREFUL TO FLASH TWRP as Revovery (NOT boot). Actually, I first flashed twrp-3.0.0-0-kiwi.img, then directly after flashed twrp-3.0.2-0-kiwi.img and then I flashed twrp-3.0.0-1-kiwi.img (you see I was kind of desperate...). After that, from TWRP I booted into bootloader and again flashed twrp image from PC using adb:
fastboot flash recovery twrp-3.1.1-0-kiwi.img
7. from ADB, I again booted into TWRP
fastboot boot twrp-3.1.1-0-kiwi.img
8. ... where I once more installed TWRP.
After that I clicked reboot and selected to boot into Recovery. Then it finally worked.
After endless tries to get my phone to boot into TWRP when pushing volume up and power button, I am not sure which of the above steps made the difference. I think the important part is to update to the latest android version.
BTW: my first problem was I bricked my phone by trying to install lineageos from TWRP 3.1.1.1 and was in an endless bootloop. Here is how I got a regular android running:
I booted into bootloader (power + vol DOWN) and flashed the following files from adb (i got the files by extracting an android stock rom with Huawei Update Extractor (HuaweiUpdateExtractor_0.9.9.3.zip)):
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
Hope this helps...
It's better to post in a new thread, that will be more helpful for you
MANUALLY INSTALLING FULL NOUGAT 7.11 FIRMWARE 2018/03/15(security_patch 2018-02-05) (RECOVERY, BOOT, SYSTEM) Even If Its Soft Bricked Because You Messed Up Somewhere. Files Here Are For Asus Zenfone 3 Zoom ZE553KL Z01HD WW Sku .
Its The Last Nougat Update Before Oreo Was Released.
MORE FIRWARES HERE
Story Time:
As I Remember It.....Condensed Version, This Was Over A Few Days Of Trial And Error, Mainly Because Adb SideLoad Refused To Flash Asus's Stock Firmware Zip Files.
I Messed Up My Friends Asus Zenfone 3 Zoom, ZE553KL.
He Bought Used, He Quickly Updated To Oreo From Within The Phones Update But Was Having Missed Texts And Slow Lte(4g) Speeds, He Wasnt Sure If It Happened On Nougat Which The Phone Was On Originally.
Downgraded To 6.01, Installed Twrp, Magisk, Still Having Same Issues, Flashing An Update Zip W/a Modded Updater Script Via Twrp Caused A Soft Bricked Phone, It Never Completed The Flash, Twrp Backup Didnt Work, Factory Reset A No Go, Couldn't Manually Flash Stock Rom As Adb Sideload Always Gave Errors, Fastboot System images Didnt Help For One Reason Or Another, Phone Was Just Bootlooping Back To The Unlocked Bootloader Menu.
Down Loaded Alot Of Stuff, Read Countless Pages, And Somehow Got The Right Firmware Files(recovery, boot, system img files) That Was Flashable Via Fastboot Extracted From A Zip, My Fix Is Below. These Are Not My Files But I Cant Remember Where I Got Them From As I Dl-ed Alot Of Stuff Trying To Get This Phone To A Running State. No I Havent Tried Oreo Yet, He Has His Phone Back Now And Not Sure When He'll Let Me Play With It Again, Lol.
UPDATE TO THIS STORY
HOWTO FLASH
PREREQUISITES:
Make A Nandroid Backup
If Bootable Remove/Signout Of Google Account
(Might Work With Locked Bootloader, IDK)
Ze553kl(Zenfone3 Zoom) Phone With Unlocked Bootloader(used unlocker apk from asus website when phone was in running state)
Unlocking Bootloader App Available From Asus - was for upto nougat 7.11
Usb Asus Drivers
Usb Debugging Enabled On Phone, Maybe Not But Wont Hurt To Try
Adb Fastboot Program(Included)
Recovery, Boot, And System Img Files Of Nougat 7.11(Included)
Computer Running Windows
Usb Data Cable For Phone
ON PHONE-
If Bootable Enable Usb Debugging, Uncheck Verify Apps Via Usb, Install From Unknown Sources, Remove Google Account
Backup Internal Sdcard - Most Def
Remove Sdcard, Just In Case
Put Phone Into Fast Boot Mode- Unplugged, Phone Powered Off - Vol Up + Power Button Pressed, Hold Both Until Screen Comes On.
Plug Usb In Cable To Phone From Pc.
ON COMPUTER-
From The Download Section Below Dl ADB_FASTBOOT_1.4.1.ZIP File And Extract It Into A New Empty Folder.
Download And Copy The Three .Img Files From The Download Section Below Into This New Adb Folder
HOW TO RUN ADB VIA COMMAND PROMPT? -
From Within Adb-fastboot Folder You Created, Nothing Selected, Hold Down The Shift Key Then Use The Right Mouse Button To Click In Empty Space In The Adb-fastboot Folder, Select "Open Command Window Here" From The Menu That Pops Up.
From Within Command Prompt Type-
Adb Devices
It Should Output A Device With A String Of Letters And Numbers, Thats Your Phone.
Next Steps Will Install Nougat 7.11 And Consequently Wipe Your Phone
Run These 5 "fastboot" Commands One At A Time.
When Each Step Is Completed Run The Next Command, You Can Copy And Paste These Five (5) Fastboot Commands Into The Command Prompt Window
----------------------------------------------------------------------
1.
Code:
fastboot flash recovery recovery-zoom-7.11.img
2.
Code:
fastboot flash boot boot-zoom-7.11.img
3.
this one @ ~4gb will take awhile to initialize and complete, patience needed
CAN REDO THIS SYSTEM FLASH NOW TO MAKE SURE IT "STICKS"
Code:
fastboot flash system system-zoom-7.11.img
4.
wipes internal sdcard
Code:
fastboot format userdata
5.
Code:
fastboot reboot
-------------------------------------------------------------------------------------------
if you were successfull it will boot into 7.11, takes about 3-5 mins to boot.
IF DID NOT FLASH PROPERLY OR ODD BEHAVIOR AFTER REBOOT THEN REDO STEPS AGAIN....ELSE KEEP READING!
------------------------------------------------------------------------
IF STILL BRICKED OR ODD BEHAVIOR BUT CAN BOOT TO BOOTLOADER/FASTBOOT THEN DO THESE COMMANDS WHEN IN FASTBOOT MODE
Code:
fastboot erase system
fastboot erase recovery
fastboot erase boot
fastboot erase userdata
fastboot -w
fastboot erase splash
fastboot erase cache
THEN RE-BOOT BACK INTO BOOTLOADER AND DO THE FLASH FOR 7.11 FIRMWARE
STILL HAVING ISSUES, RESTORE USING TECH FW THAT REFLASHES ALL MDMS, RADIOS, DRIVERS ETC FROM HERE
[FW] 7.1.1 & 6.0.1 Service Tech Firmwares - Debrick - Upgrade - Downgrade
- -------------------------------------------------------------------------------------
disclaimer im not responsible for yours or anyone elses devices, do at your own risk
DOWNLOADS
PHONE FILES ARE FROM A Asus Zenfone 3 Zoom ZE553KL WW SKU FIRMWARE Version WW-71.60.139.30 2018/03/15
RECOVERY-ZOOM-7.11.IMG
md5 03d8358e1341a73b5a492c12e3dbe39e
BOOT-ZOOM-7.11.IMG
md5 1ad55f9852d56b79a95654173af5649a
SYSTEM-ZOOM-7.11.IMG
md5 7217f778701c988271739ab18fb0fb30
ADB_FASTBOOT_1.4.1.ZIP
..
Thanks for the information...
I can provide you latest system,boot, recovery.img files if you want...
Do you know how to make raw firmware?? Because that could come handy for hard bricked phones.
Deleted. Double post
Naman Vashishth said:
Thanks for the information...
I can provide you latest system,boot, recovery.img files if you want...
Do you know how to make raw firmware?? Because that could come handy for hard bricked phones.
Click to expand...
Click to collapse
What do u mean by raw. In what format is it in.
I've converted oreo stock firmware .dat files to .img files but I can't test them as I don't have the phone. My friend seems happy on nougat and I don't think he'll let me flash it on his phone.
I haven't tried dl-ing official stock and seeing if phone will see it as an update to manually self install via nougat recovery or maybe to try adb sideload again.
Naman Vashishth said:
I can provide you latest system,boot, recovery.img files if you want...
Click to expand...
Click to collapse
Please do - I could sure use them.
Work very well !
ciao
God bless you! You made my quite dead phone, live again!
Thank you
I can't update to Oreo via ota... do you know why?
the op here. lol, my friend dropped the phone and now its dead screen, no display/no touch but phone still works.
he doesnt want to get a screen for it as it will cost almost as much as he paid for it.......so its mine now.
been flashing stuff to it, gave it a very hard soft brick, still dealing with that.
my goal was to run it remotely but get adb/usb debugging enabled and get pc trusted by phone. i thought he wanted to sell it as is but decided to give to me to do whatever i want to it
got out of the hard soft brick, installed twrp, use twrp cli, twrp backups and restore, rooted w/magisk, installed 6.0.1 (fluked it), 7.11 using my method above with the extra erase commands, removed frp, got adb /usb debugging enabled and device adb authorized by hacking , got vysor, a remote control mirroring app running, all without a working screen.
i'll write up a tut for any1 else that needs help. fyi, weak screen if dropped even short distance, but he had no cover, but pretty to hard to brick it, imo, ymmv
So can i downgrade my phone from android 8 to 7.1.1 following this process.
kingairtel08 said:
So can i downgrade my phone from android 8 to 7.1.1 following this process.
Click to expand...
Click to collapse
yes, i went from 8.0 to 7.11 then to 6.01
more fw here https://forum.xda-developers.com/ze...fw-7-11-6-0-1-service-tech-firmwares-t3850000
Bro i am on 8.0 and want to unlock bootloader and root it n enable cam2api in it, as unlocker nt working in android 8.0 so i want to back to 7.1.1. thank u bro,i will try it tonight.
Bro installed successfully 7.1.1 but microphone sound stopped.when calling cant hear anything.what to do ?unlock tool not working on it.
kingairtel08 said:
Bro installed successfully 7.1.1 but microphone sound stopped.when calling cant hear anything.what to do ?unlock tool not working on it.
Click to expand...
Click to collapse
after flashing did u, in stock recovery, do a factory reset and wipe caches aka wipe user data in fastboot.
else do a complete wipe as outlined in op
yes bro i m on stock recovery ,did wipe cache etc.
kingairtel08 said:
yes bro i m on stock recovery ,did wipe cache etc.
Click to expand...
Click to collapse
does etc mean factory reset?
did u do the extra procedure to completely erase everything as posted in op in the section of when still having issues
yes bro. i followed all steps .
kingairtel08 said:
yes bro.
Click to expand...
Click to collapse
yes to which
this?
fastboot erase system
fastboot erase recovery
fastboot erase boot
fastboot erase userdata
fastboot -w
fastboot erase splash
fastboot erase cache
if yes then do a full restore of radio, mdm etc from here using method 1 or 2
https://forum.xda-developers.com/att-s7-edge/how-to/fw-7-11-6-0-1-service-tech-firmwares-t3850000
i did all this steps then flash firmware img.
kingairtel08 said:
i did all this steps then flash firmware img.
Click to expand...
Click to collapse
which method did u use from the link i posted
bro i dnt have the 7.1..1 zip file ,i used ur 7.1.1.img file,used method 2.
i will try once again ,wil reply within 2hours.
bro i want to unlock my phone whats why i downgrade,but after downgrading checked official unlock tool gives the same network error that gives on android 8.0.is there any way to unlock it on this 7.1.1 firmware?
Need help.. cant turn on my Phone.. always stuck at android one Logo and fastboot (when i try hold volume up and power )
i rooted phone (adb,twrp,magisk) . Everything well good, but WIFI didn't work. Then i get in TWRP and maybe deleted partition A and B( ) i can't get through the Fastboot.
my mi a3 is V10.3.6.0.PFQMIXM version-- and cant Flash it with miflash tool, it says error : can not found file flash_all_lock.bat
now i cant find my device with Adb devices (its says List of devices attached)
pls help :/ thank you.
Go to nearest service centre
Going to a service center probably isn't a wise idea. You've rooted your phone - your warranty is gone.
I guess you don't have the right drivers installed OR, the stock rom you were trying to flash had some issues with the flash script. You might want to take a look at this post
Download the correct stock ROM for your device, the .tgz version & flash it with miflash tool. It's important to note that some versions of miflash tool don't work with Mi A series phones for unknown reasons.
Alternatively, if your recovery is working, then you can flash the recovery version of stock rom. It's all available on this forum.
evanB70 said:
Going to a service center probably isn't a wise idea. You've rooted your phone - your warranty is gone.
I guess you don't have the right drivers installed OR, the stock rom you were trying flash had some issues with the flash script. You might want to take a look at this post
Download the correct stock ROM for your device, the .tgz version & flash it with miflash tool. It's important to note that some versions of miflash tool don't work with Mi A series phones for unknown reasons.
Alternatively, if your recovery is working, then you can flash the recovery version of stock rom. It's all available on this forum.
Click to expand...
Click to collapse
thx m8
I flashed with Miflash( and writed flash_all_lock.bat), used version V10.3.4.0. and it worked.. wifi working. (my build number say it is V10.3.6) ?
ticmali said:
thx m8
I flashed with Miflash( and writed flash_all_lock.bat), used version V10.3.4.0. and it worked.. wifi working. (my build number say it is V10.3.6) ?
Click to expand...
Click to collapse
Glad to hear you're phone is working fine now :highfive: :highfive:
I think you somehow had your wifi / mobile data on & the phone downloaded the OTA & auto updated itself to the latest firmware, that is V10.3.6.0.
evanB70 said:
Glad to hear you're phone is working fine now :highfive: :highfive:
I think you somehow had your wifi / mobile data on & the phone downloaded the OTA & auto updated itself to the latest firmware, that is V10.3.6.0.
Click to expand...
Click to collapse
yes, I had mobile data on. thanks
hello,
i was trying to install havoc on mi fresh new mi a3 i got stocked in fastboot. tried everthing but it give a status as "pause" in miflash or bat command.. what to do?
error message in bat command for V10.3.4.0.PFQMIXM_20190815 as in https://drive.google.com/open?id=1oLmwpDsd8ICUPsty46osBReJdcckqvPE please hekp
Underraino said:
hello,
i was trying to install havoc on mi fresh new mi a3 i got stocked in fastboot. tried everthing but it give a status as "pause" in miflash or bat command.. what to do?
error message in bat command for V10.3.4.0.PFQMIXM_20190815 as in https://drive.google.com/open?id=1oLmwpDsd8ICUPsty46osBReJdcckqvPE please hekp
Click to expand...
Click to collapse
Set active slot to a first before flashing in MiFlash using command - "fastboot set_active a" (without quotations) in adb command.
Underraino said:
hello,
i was trying to install havoc on mi fresh new mi a3 i got stocked in fastboot. tried everthing but it give a status as "pause" in miflash or bat command.. what to do?
error message in bat command for V10.3.4.0.PFQMIXM_20190815 as in https://drive.google.com/open?id=1oLmwpDsd8ICUPsty46osBReJdcckqvPE please hekp
Click to expand...
Click to collapse
Try my Procedere,i try it Yesterday and works:
-set SLOT B and install twrp
-then boot to TWRP recovery and Flash TWRP.zip again
-reboot to twrp recovery (Check If you on SLOT B ...)
-wipe Cache,system,Data
-flash Rom HAVOC
-flash TWRP
-reboot in TWRP again,then...
Set SLOT A!
-flash Gapps
-flash FDE
-Format Data
-Reboot to to System and wait when HAVOC done
Reboot to TWRP then Flash and root Magisk 20.2 in SLOT A, Reboot...
Done!
tried flashing my mi a3 to stock now stuck in fastboot mode
I finally got miflash to recognize my phone by adding a new folder and naming it "log" and i tried flashing "laurel_sprout_global_images_V10.3.8.0.PFQMIXM_20191012.0000.00_9.0_d099f2839b" ; it said it was flashing and had green progress bar, but it went all the way to 100% after about 600 seconds and i just gave up after 1200 seconds. what am I missing?
mewcatchew said:
I finally got miflash to recognize my phone by adding a new folder and naming it "log" and i tried flashing "laurel_sprout_global_images_V10.3.8.0.PFQMIXM_20191012.0000.00_9.0_d099f2839b" ; it said it was flashing and had green progress bar, but it went all the way to 100% after about 600 seconds and i just gave up after 1200 seconds. what am I missing?
Click to expand...
Click to collapse
Just reboot your device when it finishes after 600 seconds. Miflash doesn't tell you that it successfully flashed it it just goes on forever. So just reboot and it will work.
Negative. still stuck in fastboot mode
mewcatchew said:
Negative. still stuck in fastboot mode
Click to expand...
Click to collapse
Change the active slot to 'a' and reboot.
garylawwd said:
Just reboot your device when it finishes after 600 seconds. Miflash doesn't tell you that it successfully flashed it it just goes on forever. So just reboot and it will work.
Click to expand...
Click to collapse
msatyanarayana said:
Change the active slot to 'a' and reboot.
Click to expand...
Click to collapse
it's unable as its in a locked state: 'FAILED (remote: 'Slot Change is not allowed in Lock State
I believe I need to get it into EDL mode. I have no problem taking off the back glass and shorting the pins to do so, but not sure what to do after that point... Set slot to active "a", flash it with miflash with a fastboot stock ROM? Also from what ive read, you can only put thw phone into edl mode once so it's a one shot deal.
mewcatchew said:
it's unable as its in a locked state: 'FAILED (remote: 'Slot Change is not allowed in Lock State
I believe I need to get it into EDL mode. I have no problem taking off the back glass and shorting the pins to do so, but not sure what to do after that point... Set slot to active "a", flash it with miflash with a fastboot stock ROM? Also from what ive read, you can only put thw phone into edl mode once so it's a one shot deal.
Click to expand...
Click to collapse
Try to unlock bootloader once again through fastboot and after that you can change the slot.
MarcusMario0605 said:
Set active slot to a first before flashing in MiFlash using command - "fastboot set_active a" (without quotations) in adb command.
Click to expand...
Click to collapse
this command is not working for me it is giving error of unknown command
msatyanarayana said:
Try to unlock bootloader once again through fastboot and after that you can change the slot.
Click to expand...
Click to collapse
it wont allow me to< says phone is in locked state
123123123...123 said:
this command is not working for me it is giving error of unknown command
Click to expand...
Click to collapse
C:\adb\fastboot.exe: unknown option -- set-active=a
how to solve this?
:crying:
---------- Post added at 11:09 AM ---------- Previous post was at 11:05 AM ----------
MarcusMario0605 said:
Set active slot to a first before flashing in MiFlash using command - "fastboot set_active a" (without quotations) in adb command.
Click to expand...
Click to collapse
on entering this command i am getting a whole lot of command suggestion as this command not working for me. can you tell me what i am doing wrong and what should i do to make it correct.
123123123...123 said:
C:\adb\fastboot.exe: unknown option -- set-active=a
how to solve this?
:crying:
---------- Post added at 11:09 AM ---------- Previous post was at 11:05 AM ----------
on entering this command i am getting a whole lot of command suggestion as this command not working for me. can you tell me what i am doing wrong and what should i do to make it correct.
Click to expand...
Click to collapse
managed to get into EDL mode by shorting the pinouts, but still cant flash stock ROM cuz apparently xiaomi has to authorize it (ie i dont have permission to unbrick it). This is the first and last xiaomi phone I'll ever buy - never had a phone where there was no option i had to unbrick it. going to ****in smash it to peices!
I felt sorry that no one did help these people,
go to fastboot and run windows commands in twrp folder and type as following :
- option one:
fastboot devices
./fastboot set_active b
./fastboot erase boot
./fastboot set_active a
./fastboot erase boot
fastboot flashing unlock (optional)
fastboot Flash boot [put twrp name].img or go to mi flash to install stock rom. or unzip the stock rom from bat file run it
or try the second option:
https://ibb.co/w6bcG5g
islam=salam=peace=paix