Hey everyone,
So today I noticed that the black rubber that is under the battery flap of my phone is starting to peel off. It isn't too terrible yet, but I do use the waterproof feature of my phone regularly and I don't want to jeopardize my phone if this peels off. Does anyone know where I can get a replacement cover? I checked eBay and didn't have much luck so I am hoping some of you guys may know of another site that supplies the OEM parts.
Thank you!
mpeclipse03 said:
Hey everyone,
So today I noticed that the black rubber that is under the battery flap of my phone is starting to peel off. It isn't too terrible yet, but I do use the waterproof feature of my phone regularly and I don't want to jeopardize my phone if this peels off. Does anyone know where I can get a replacement cover? I checked eBay and didn't have much luck so I am hoping some of you guys may know of another site that supplies the OEM parts.
Thank you!
Click to expand...
Click to collapse
Yeah a common thing on these phones (USB cover door). I have not found any yet either, AliExpress had some but were pulled or ran out (just checked again they are back now, so AliExpress has them again --
https://www.google.com/search?q=Z3v+usb+cover+&ie=utf-8&oe=utf-8). Better link -- http://www.aliexpress.com/item/for-Sony-Xperia-Z3V-D6708-OEM-SIM-Card-Micro-SD-USB-Charging-Port-Dust-Plug-Waterproof/32430237429.html
I had to take my (wife's phone as well) phone back to VZW and get a replacement phone due to this. If your phone is within the one year warranty go to VZW store and show them they will get you another phone.
I did a test and if you apply a tiny amount of Vaseline on the seal it will work better as well as make a more watertight seal, just lightly coat the rubber seal, good idea to do all doors like that, I have a product called "dielectric grease" that works even better, use sparingly, can get at auto parts store.
So glad this is an easy purchase if I need it. Thanks.
Sent from my D6708 using XDA Premium 4 mobile app
And just like that they're gone, doubt they were genuine OEM anyways
nickmpower said:
And just like that they're gone, doubt they were genuine OEM anyways
Click to expand...
Click to collapse
They went fast! I just checked last night and I was going to purchase one this morning, but I guess that isn't happening.
Still cant believe you can't get these from sony. I don't know if I could trust and off brand copy to be waterproof
nickmpower said:
And just like that they're gone, doubt they were genuine OEM anyways
Click to expand...
Click to collapse
No way! Crap, need to find a well stocked supplier of them. Description said -- Original - Brand New
But it also said -- Quantity: Large in stock
mpeclipse03 said:
They went fast! I just checked last night and I was going to purchase one this morning, but I guess that isn't happening.
Click to expand...
Click to collapse
Sorry, like I said -- they are there, then they are gone.
nickmpower said:
Still cant believe you can't get these from sony. I don't know if I could trust and off brand copy to be waterproof
Click to expand...
Click to collapse
Agreed, Sony should let people have access to their supplier. But then again Sony is greedy and wants the revenue from out of warranty repairs.
I think I may have found the part here: http://magboss.eu/articles.php?currency=EUR&cid=1600
mpeclipse03 said:
I think I may have found the part here: http://magboss.eu/articles.php?currency=EUR&cid=1600
Click to expand...
Click to collapse
Let us know how it goes, it does appear to be the right cover and all but really can't tell without any pictures, those prices are odd (never mind found the USD drop down at top of page) and how long until delivered? EU, can you find out supply level?
1linuxfreak said:
Let us know how it goes, it does appear to be the right cover and all but really can't tell without any pictures, those prices are odd and how long until delivered? EU, can you find out supply level and in US currency cost?
Click to expand...
Click to collapse
Thankfully, I was raised in an Italian household and in Europe, the comma replaces the decimal point. So if something was say $3.50, in Europe, it would be written $3,50.
I did try to order one and to no surprise, they are out of stock. I did find a set of them on eBay though.
mpeclipse03 said:
Thankfully, I was raised in an Italian household and in Europe, the comma replaces the decimal point. So if something was say $3.50, in Europe, it would be written $3,50.
I did try to order one and to no surprise, they are out of stock. I did find a set of them on eBay though.
Click to expand...
Click to collapse
I found the USD currency price at top of page next to the language selector. Says 6.45 - 5.24 USD, there is a difference in USD and EU prices.
Glad you found one on Ebay.
My wife and I visited the VZW store today her usb cover seal tore again and I am still trying to get a good replacement for mine, both refurbished phone VZW sent out were junk, one the camera had a dab of something under glass on the lens and the other one the display was brown in tint or hue, if I don't get a good refurb in the next few tries I am going to just buy a cover and be done with it.
1linuxfreak said:
I found the USD currency price at top of page next to the language selector. Says 6.45 - 5.24 USD, there is a difference in USD and EU prices.
Glad you found one on Ebay.
My wife and I visited the VZW store today her usb cover seal tore again and I am still trying to get a good replacement for mine, both refurbished phone VZW sent out were junk, one the camera had a dab of something under glass on the lens and the other one the display was brown in tint or hue, if I don't get a good refurb in the next few tries I am going to just buy a cover and be done with it.
Click to expand...
Click to collapse
When you get your next refurbished device just remove the flap that you need from it. Just be careful when pulling it out and hold the white connector ribbon really good so that your fingers don't slide down it and rip the cover off (from the white piece).
jal3223 said:
When you get your next refurbished device just remove the flap that you need from it. Just be careful when pulling it out and hold the white connector ribbon really good so that your fingers don't slide down it and rip the cover off (from the white piece).
Click to expand...
Click to collapse
You know I thought of that, but just to darn honest to do that.
Life sucks sometimes for being that honest, but I sleep well at night.
1linuxfreak said:
You know I thought of that, but just to darn honest to do that.
Life sucks sometimes for being that honest, but I sleep well at night.
Click to expand...
Click to collapse
There's nothing dishonest about that at all. They are sending you a replacement phone expecting to get one back without a flap, correct? I bet they would even give you permission if you explain that you aren't happy with the quality of the refurbished devices. The flaps are easily interchangeable without any repercussions.
jal3223 said:
There's nothing dishonest about that at all. They are sending you a replacement phone expecting to get one back without a flap, correct? I bet they would even give you permission if you explain that you aren't happy with the quality of the refurbished devices. The flaps are easily interchangeable without any repercussions.
Click to expand...
Click to collapse
I agree with your logic, and I know the door is easily removed and replaced I have removed and replaced it on my phone several times. The phones are tagged with an identifying number and I bet VZW would be able to detect any deceit, would VZW care? Who knows?
1linuxfreak said:
I agree with your logic, and I know the door is easily removed and replaced I have removed and replaced it on my phone several times. The phones are tagged with an identifying number and I bet VZW would be able to detect any deceit, would VZW care? Who knows?
Click to expand...
Click to collapse
No worries man. I'm glad there are still honest people out there with a conscience. I would suggest you to ask them though so there is no question about what you are doing. I'm fairly certain that they will allow you to. I would ask technical support rather than a normal CSR though. They seem to have more information. I've asked similar questions about refurbs and they are usually willing to do what it takes to make the customer satisfied (within reasonable limits). No harm in asking right?
jal3223 said:
No worries man. I'm glad there are still honest people out there with a conscience. I would suggest you to ask them though so there is no question about what you are doing. I'm fairly certain that they will allow you to. I would ask technical support rather than a normal CSR though. They seem to have more information. I've asked similar questions about refurbs and they are usually willing to do what it takes to make the customer satisfied (within reasonable limits). No harm in asking right?
Click to expand...
Click to collapse
Thanks for the ideas, no sweat off my back yet VZW is the one footing the bill for postage on the refurbished phones.
Got one!
I got a new flap off ebay here: http://www.ebay.com/itm/131518465518?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
I received it in 9 days and carefully compared it side by side with a genuine one on a new phone and it appears the replacement is identical and genuine
nickmpower said:
I got a new flap off ebay here: http://www.ebay.com/itm/131518465518?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
I received it in 9 days and carefully compared it side by side with a genuine one on a new phone and it appears the replacement is identical and genuine
Click to expand...
Click to collapse
Wow, pricey huh?
Yeah the price has gone up from $9 since I purchased, but still totally worth it. I got some wireless chargers and am only going to use those from now on.
Related
Has anyone replaced the little plastic flap that covers the USB port? Mine has finally broken off.
Is there anywhere to get a replacement online, and is there a resource for disassembly for the g1?
TIA
My device (Touch PRO) doesn't have it at all. I've seen that some devices have it and some don't. I think you can compare it to suspension housing of mountain bikes - some have some don't. It is just a question of dirt management style. While covers avoid the dirt getting in they also keep the trespassed dirt in there which also is not good. I don't think there is a good answer
I dont think he is looking for an opinion, I think he just flat out wants one. I could use one too, mine is broken as well.
As far as replacing, you can carefully insert it using a blunt pointed pin, I used some piano wire that was lying around when I did this to my last G1. Just "push" the ball into the housing. Alternately, you can use the plastic pry tools to lift that area, but it is a lot more work.
darfri said:
While covers avoid the dirt getting in they also keep the trespassed dirt in there which also is not good
Click to expand...
Click to collapse
I'm not super concerned about dirt, and actually prefer not having it, but if i ever want to sell the device it would be nice to have it intact.
gospeed.racer said:
I dont think he is looking for an opinion, I think he just flat out wants one.
Click to expand...
Click to collapse
Who comes to XDA not expecting an opinion? So does anyone know if replacements are available?
bittermormon said:
I'm not super concerned about dirt, and actually prefer not having it, but if i ever want to sell the device it would be nice to have it intact.
Click to expand...
Click to collapse
Exactly what I'm thinking! Mine broke recently and I actually like my phone without it better. However, as soon as my contract expires, I will want to sell my phone and get N1, so I think having all parts in place would be helpful, but I can't find it anywhere
i know its not the same but heres an idea http://www.eforcity.com/silicone-mini-5-pin-plug-for-motorola-v3-2-pc-smoke-cmotv3xxpc01.html?efprcggbadtf090605=cmotv3xxpc01
Technochris1 said:
i know its not the same but heres an idea http://www.eforcity.com/silicone-mini-5-pin-plug-for-motorola-v3-2-pc-smoke-cmotv3xxpc01.html?efprcggbadtf090605=cmotv3xxpc01
Click to expand...
Click to collapse
That might work. I'll order some and then post pictures.
Technochris1 said:
i know its not the same but heres an idea http://www.eforcity.com/silicone-mini-5-pin-plug-for-motorola-v3-2-pc-smoke-cmotv3xxpc01.html?efprcggbadtf090605=cmotv3xxpc01
Click to expand...
Click to collapse
Nice find
Karolis said:
That might work. I'll order some and then post pictures.
Click to expand...
Click to collapse
Looking forward to it.
I'm in the UK and they ship from the US, so it might take a while. I've ordered it on 15th and got a shipping confirmation the next day, so hopefully some time next week I'll have them.
OK, got them... and I think it's a bit of a waste of money. They're too small and also when you need to for example plug-in the headphones, you have to figure out where to put those flaps not to loose them.
Anyway, you decide:
I have been using my T-Mobile TP2 without protection on it for a while and have dropped it a few times. The screen is still perfect and the lower half (keyboard) has relatively no damage other than a few spots of chipped paint.
But the upper half, around the edges, has took quite a bit of damage. Mostly chipped pieces and dents, partially because of me dropping it and also because the bodyguard I was using previously damaged it! It was one of those crappy snap-on ones. Will never get one again, just bought ghost armor.
Anyway my question is what is the best way to repair the chipped pieces and dents or is that piece sold somewhere so I could replace it? I have no experience replacing things on the phone but I'm sure if there's a tutorial anywhere it wouldn't be too hard for me. Besides I"m not trying to disassemble the entire thing just the upper portion without the screen.
Any help appreciated.
Showtime7 said:
I have been using my T-Mobile TP2 without protection on it for a while and have dropped it a few times. The screen is still perfect and the lower half (keyboard) has relatively no damage other than a few spots of chipped paint.
Deleted stuff...
Any help appreciated.
Click to expand...
Click to collapse
Best option...Ebay>buy broken (software wise) TP2>use if for spare parts
hmmm the only cheap one I could find listed was also worn...
was hoping to profit because i will probably be selling my TP2 soon.
go to ebay and search touch pro 2 houseing case there about 80 bucks they come in balck and red and black and blue the are a little hard to swich over to but i did it and it worked out fine just takes about an hour tools and dremal if and only if ure useing the tp2 t7373
I am trying to locate a replacement front HW button (back key is either cracked or scratched and light shows through) - so, during the lcd repair process, is this button easily replaceable without getting too involved with any other components? Any suggestions or advice on what to do/where to locate this piece of plastic would be met with extreme gratitude!
Get a new housing from eBay.
Just be careful to get one that fits your version.
My phone was stolen at work on Friday, so I managed to scramble and find one at a good price on eBay and it arrived this morning.
While I did ask to see photos, and I expected some scuffs, the photos didn't do the device justice at all, as it's much worse than I expected. In all the time I've owned my devices, I've never dropped my phone once, not once! this thing's a disaster.
So I'll need to get a replacement housing. I've been looking at eBay but couldn't see anything except these ridiculous colored housings for teens and 20-somethings. Where do real adults get the housings from?
This is an excellent outer shell protector, gives better heft holding (IMHO), rubberized black, very lightweight. Just snaps on and off.
Auction ended, but locate seller store. My Tilt2 fit perfectly in the Touch Pro Verizon except camera button needed cutting shell (trivial task).
http://cgi.ebay.com/HTC-TOUCH-PRO-2...D-COVER-CASE-/130412358305?pt=PDA_Accessories
PDADoc said:
My phone was stolen at work on Friday, so I managed to scramble and find one at a good price on eBay and it arrived this morning.
While I did ask to see photos, and I expected some scuffs, the photos didn't do the device justice at all, as it's much worse than I expected. In all the time I've owned my devices, I've never dropped my phone once, not once! this thing's a disaster.
Click to expand...
Click to collapse
You could take it up with eBay for SNAD, probably get a refund depending on the exact wording of the add, but if it was really SNAD should do it.
So I'll need to get a replacement housing. I've been looking at eBay but couldn't see anything except these ridiculous colored housings for teens and 20-somethings. Where do real adults get the housings from?
Click to expand...
Click to collapse
Eh? On ebay? You have everything from the original HTC version to various carrier variations, search more/wider. They're 40-80$ though.
kosmarnik said:
You could take it up with eBay for SNAD, probably get a refund depending on the exact wording of the add, but if it was really SNAD should do it.
Eh? On ebay? You have everything from the original HTC version to various carrier variations, search more/wider. They're 40-80$ though.
Click to expand...
Click to collapse
I've been checking but I haven't found anything but these colored replicas and I don't want that. I'm willing to pay more for the original housing if I could find it.
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
PDADoc said:
I've been checking but I haven't found anything but these colored replicas and I don't want that. I'm willing to pay more for the original housing if I could find it.
Click to expand...
Click to collapse
Sorry man, but lern2internet. It's the first 4 hits on ebay. Just enter "htc touch pro 2 housing" and check 'worldwide'.
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
Click to expand...
Click to collapse
eBay dispute process is tedious an long winded, but will lean towards the buyer in almost all cases. You just have to be patient.
PDADoc said:
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
Click to expand...
Click to collapse
Always pay with your credit card through PayPal. Ebay and PayPal suck at disputes; your credit card company is your fall-back and your best protection as well.
You can get OEM housings for $50-60:
http://www.parts4repair.com/products/Housing-for-HTC-T7373.html
Looks like it's kinda tricky to replace the housing (if you're going OEM)....
http://pocketnow.com/hardware-1/htc-touch-pro2-disassembly-assembly-training-videos
PDADoc said:
I've been checking but I haven't found anything but these colored replicas and I don't want that. I'm willing to pay more for the original housing if I could find it.
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
Click to expand...
Click to collapse
On ebay? i suggest amazon.
rete said:
Always pay with your credit card through PayPal. Ebay and PayPal suck at disputes; your credit card company is your fall-back and your best protection as well.
You can get OEM housings for $50-60:
http://www.parts4repair.com/products/Housing-for-HTC-T7373.html
Looks like it's kinda tricky to replace the housing (if you're going OEM)....
http://pocketnow.com/hardware-1/htc-touch-pro2-disassembly-assembly-training-videos
Click to expand...
Click to collapse
Great, thanks for the tip! I'll have to look into this closer, as I think if I go with the Touch Pro 2 OEM housing, there'll be a hole for the front-facing camera.
Maybe I'll just deal with it for now and keep my eyes open for an AT&T Tilt 2 housing somewhere. If it wasn't so beat up, I'd try a warranty exchange through AT&T; I was able to do it when I purchased a used BlackBerry Bold 9700 with no problem.
Can use HTC TP2 housing on T-Mobile TP2?
PDADoc said:
Great, thanks for the tip! I'll have to look into this closer, as I think if I go with the Touch Pro 2 OEM housing, there'll be a hole for the front-facing camera.
Maybe I'll just deal with it for now and keep my eyes open for an AT&T Tilt 2 housing somewhere. If it wasn't so beat up, I'd try a warranty exchange through AT&T; I was able to do it when I purchased a used BlackBerry Bold 9700 with no problem.
Click to expand...
Click to collapse
Hi there!
I've a T-Mobile Touch Pro 2 that is quite beat up too & I want to replace the whole housing.
Problem is where I'm living right now, the T-Mobile housing costs double of the standard Touch Pro 2 housing.
Is it possible to fit the motherboard, flex cable & LCD panel of the T-Mobile onto a HTC Touch Pro 2 casing with the power button?
I would need the touch screen & call/navigation buttons as well.
Please advise me if you know anything about this.
Thanks!
Konker
I'm afraid I don't know myself, but if you keep searching, I'm sure there is someone who's done it and knows for sure.
Take a look at this thread: http://forum.xda-developers.com/showthread.php?p=8580850#post8580850
Of course it happens 1 day after the return period. Hopefully this will be covered by Asus and not turn into a RMA nightmare. Does anybody have any info if this is an easy fix? Also my battery is draining at a more rapid speed too. Could these problems be related? The last 2 pins on the bottom are now broken off as well.
-UPDATE- 6/1/12
Sent it out for an RMA on May 18th, one day before my 30 day RMA would expire. I got it back from Asus after a couple little scares. First, I forgot to take out my Class 10 32gb Micro SD card. I went on to the support chat and they said it was no problem and happens all the time. I called customer service after and they made an addendum to my RMA saying an SD card was included. After about a week and a half of the status saying "Repairing" it finally changed to "Waiting for customer reply OOW-CID" I again went straight to support chat and they guy told me that it might be a case of Customer Induced Damage. I explained that it was most definitely not CID. He told me to call and explain my case becomes sometimes it turns out not to be CID. Procrastination got the best of me and I forgot to call. Next thing I know I get an email saying Asus shipped my Prime back. At this point I just hoped for the best. Coming home June 1st I see a little package right outside my door. All the time wondering why Fedex didn't have anyone sign for it like the directions say. Someone could have a nice little tablet assuming they were brave enough to take it off my steps. Opened it up and BAM! Fixed good as new!!!! SD returned and everything! The only thing that I was a little puzzled by was they gave me back my crappy broken cord. Which is what started this whole thing in the first place. I don't really care about that since I got another one off eBay for like 8 bucks. So here's the breakdown:
Pros-
Fixed for free
SD card was taken care of
Only 12 calendar days (not work days) until it was back in my hands
No new scratches/dents/cracks/bleeding/anything from being opened and worked on
Very helpful customer service
Cons-
Didn't replace cord (No big deal)
Put me on that short list of people that had a very positive RMA experience. I thing Asus is starting to get it's shizz together after some less that stellar RMA performances. I sent mine to the Texas facility BTW.
Explodee said:
Of course it happens 1 day after the return period. Hopefully this will be covered by Asus and not turn into a RMA nightmare. Does anybody have any info if this is an easy fix? Also my battery is draining at a more rapid speed too. Could these problems be related? The last 2 pins on the bottom are now broken off as well.
Click to expand...
Click to collapse
Its not a factory flaw (although i think the connector on the tablet is asking for it), I'm afriad, youll be liable for the repair.
Battery drain could well be bacause there are pins shorting on each other, try to seperate any that are touching with tweezers etc (carefully)
Any idea how much they will charge?
I have similar damage to my dock (not tablet). It got dropped while being charged & landed on connector. Both cable & dock connector damaged. Definately a weak point!
I contacted ASUS UK who's only suggestion was return for repair (at quite a high MINIMUM cost).
Instead, I've obtained a new dock from the USA - probably cheaper than a repair.
I've also managed to obtain new connectors and will attempt my own repair.
paulpuk said:
I have similar damage to my dock (not tablet). It got dropped while being charged & landed on connector. Both cable & dock connector damaged. Definately a weak point!
I contacted ASUS UK who's only suggestion was return for repair (at quite a high MINIMUM cost).
Instead, I've obtained a new dock from the USA - probably cheaper than a repair.
I've also managed to obtain new connectors and will attempt my own repair.
Click to expand...
Click to collapse
Where did you get a new dock connector? I was looking around and couldn't find a replacement part.
I'm not 100% certain until they arrive, but I think the connectors are made by TE connectivity, either part number 2129260-2 or 2129273-1
I have ordered mine from Mouser Electronics
uk.mouser.com/ProductDetail/TE-Connectivity/2129276-1/?qs=UlfnwZ2x8nSgxOi2zKjuCA%3d%3d
There is a Data Sheet available from this page that provides information on the range.
Explodee said:
Of course it happens 1 day after the return period. Hopefully this will be covered by Asus and not turn into a RMA nightmare. Does anybody have any info if this is an easy fix? Also my battery is draining at a more rapid speed too. Could these problems be related? The last 2 pins on the bottom are now broken off as well.
Click to expand...
Click to collapse
if its been less than 90 days since purchase, I think you can buy a squaretrade warranty ...check out the site or call and ask them what the policy is.
Read through this thread it will give you a better grasp on them:
http://forum.xda-developers.com/showthread.php?t=1471404&highlight=squaretrade
Try http://www.asusparts.eu/index.php?cPath=222155_222535
not exactly sure what the part number would be .. you might have to take yours apart to find that out first
how did you do that?
How did it happen? Is there a way to say how it happened that's not far from the truth but sounds a little more in your favor? Something like : I was having difficulty connecting the power supply since I got it and thought it wasn Edit: wasn't right and now it looks like this and won't work anymore?
I'd also change the pic to a little farther away. While it's good for us it looks bad on your part showing it that close up to Asus. Don't know but maybe they would have you send a pic before you send the tab to determine if it is covered.
I think I would just act like I don't know exactly how it happened and see what they say. I think they would cover it because it is so new.
I made a request about a week ago on the Asus site but they were way too slow to respond so I called them up yesterday. I had a very helpful guy on the phone talking to me who was asking me all the questions. I told him that I am super careful with this thing and gadgets in general. (Never lost a phone, or even broken one. Same with all my computers/mp3 players and so on) I had a case and screen protector ordered even before I bought my Prime. I told him the cable must have been crappy and it totally screwed up the inside connector. He put me on hold after I gave him my whole spiel and came back with a RMA number and instructions/e-mails to be sent out for service. I am posting on here to see if anyone had a similar experience and also to see if this would be covered. I read in the e-mail that physical damage is not covered. But if the cord is faulty and caused this then it would be covered right? And since I was given RMA authorization does that mean I'm in the clear? Or am I sending it away for 3 weeks for them to just say tough break sucka, we don't cover that.
It's possible it could be covered but best believe they will check to see if this was user induced damage(U.I.D). If they don't cover it and you're within 90 days of purchase, just buy the squaretrade warranty that covers physical damage. It'll be cheaper than paying Asus to fix it if they decide not to cover it. I seriously doubt someone would intentionally break the only source of power for the device but Asus could see it as user caused damage by not handling the plug Right.
Your story makes me Leary now of constantly using the prime while plugged up. I don't want to stress the 40pin connector to break like yours did.
Good luck! Remwber square trade of you within that 90 day window and if Asus denies you coverage.
Explodee said:
Of course it happens 1 day after the return period. Hopefully this will be covered by Asus and not turn into a RMA nightmare. Does anybody have any info if this is an easy fix? Also my battery is draining at a more rapid speed too. Could these problems be related? The last 2 pins on the bottom are now broken off as well.
Click to expand...
Click to collapse
Aren't these pictures of an original TF-101, rather than a Prime? The design of the back cover is a bit of a give away.
TheKraken said:
Aren't these pictures of an original TF-101, rather than a Prime? The design of the back cover is a bit of a give away.
Click to expand...
Click to collapse
Lol, what? TF101 is thick and brown, doesn't have tapered edges like the Prime. That's a Champagne Gold tapered edge slightly covered up by a Skinomi carbon-fiber skin.
Anyway, that sucks. Wouldn't the part itself be interchangeable with TF101 counterpart? Or would they maybe be routed differently? Didn't look at the linked parts, is that what they were?
buxtahuda said:
Lol, what? TF101 is thick and brown, doesn't have tapered edges like the Prime. That's a Champagne Gold tapered edge slightly covered up by a Skinomi carbon-fiber skin
Click to expand...
Click to collapse
Yup, you're right. My mistake.
Have to say, I'm not liking that Skinomi skin compared to the Prime's spun metal finish.
TheKraken said:
Yup, you're right. My mistake.
Have to say, I'm not liking that Skinomi skin compared to the Prime's spun metal finish.
Click to expand...
Click to collapse
Yeah, it also is too abrasive of a surface. Protects the Prime and all, but be careful with expensive wooden tables, and it's rubbing the fake leather off my minisuit case. I actually just took it off the keyboard so it's only on the Prime now. Once I tire of it altogether, I think I'm just going to put Skinomi's clear cover on the entire thing; keep it protected and pretty
Sent from my Transformer Prime TF201 using XDA Premium HD via my tethered HTC Vision
TheKraken said:
Aren't these pictures of an original TF-101, rather than a Prime? The design of the back cover is a bit of a give away.
Click to expand...
Click to collapse
LMFAO at this. =)
As far as CID, the guy could have given you an RMA number just to get rid of you. I hate to be so blunt about it but you MAY have a fight on your hands with this one. They MAY tell you since its CID you have to pay shipping both ways, now I am not saying that it IS CID but they may claim it to be.
I wish ya the best of luck with it and let us know how it goes.
Sent from my EPAD using Tapatalk 2
Something to look into before you send it off. I was looking for a new credit card yesterday and I noticed that bank of america and amex and maybe other cards offer a shopping service where:
Within 90 days, if your item is stolen or damaged, they will cover it 100%.
bottom line: CALL YOUR CREDIT CARD COMPANY to see if they'll cover it, if Asus tries to charge you for it.
From other people's stories, they may just call it customer induced damage (CID) and try to charge you for it.
Good luck though!
nhshah7 said:
Something to look into before you send it off. I was looking for a new credit card yesterday and I noticed that bank of america and amex and maybe other cards offer a shopping service where:
Within 90 days, if your item is stolen or damaged, they will cover it 100%.
bottom line: CALL YOUR CREDIT CARD COMPANY to see if they'll cover it, if Asus tries to charge you for it.
From other people's stories, they may just call it customer induced damage (CID) and try to charge you for it.
Good luck though!
Click to expand...
Click to collapse
Yeap, thats a 100% amex only thing, and only if you purchased it on their card. Definately nice though to know thats in your back pocket if you carry one.
Screwedupsmitty said:
Yeap, thats a 100% amex only thing, and only if you purchased it on their card. Definately nice though to know thats in your back pocket if you carry one.
Click to expand...
Click to collapse
i think i might have seen that on the bofa website too. doesn't hurt to call up and ask though
Sent from my Transformer Prime TF201 using XDA Premium HD app
I noticed yesterday small cracks appearing round the edges of the openings in the white back of my S3. I've emailed Samsung to see what they will do about it but thought i'd see if anyone has had issues like this. I dont take the cover off my phone very often and i'd say it's been off less than 10 times since i've owned it (July).
gooshy said:
I noticed yesterday small cracks appearing round the edges of the openings in the white back of my S3. I've emailed Samsung to see what they will do about it but thought i'd see if anyone has had issues like this. I dont take the cover off my phone very often and i'd say it's been off less than 10 times since i've owned it (July).
Click to expand...
Click to collapse
My brother's S3 had that and he barely removed it since he is using a case. Like once a month. It has been an issue since the beginning. You have to buy a new back cover if you can't live with that. Or a case.
Be aware these are some of the weakest parts of the case, if when removing the case you bend it back to far this may occurr. What is too far?, when that was
To open the case you should only pull it back ebnough to get your fingle nails under it and then pull it back and off without bending any of it, this is possible, i've had mine off numerous times this way with no damage at all.
New backs cost naff all though, just replace it fella.
Show iSheep why a removable back is so awesome... Get on ebay and buy a new one, they are really cheap (thank you plastic) then laugh at the iSheep you know who have to send it in for service when their precious chicken foil gets scratched.
delsus said:
Show iSheep why a removable back is so awesome... Get on ebay and buy a new one, they are really cheap (thank you plastic) then laugh at the iSheep you know who have to send it in for service when their precious chicken foil gets scratched.
Click to expand...
Click to collapse
nexus 4
respider said:
nexus 4
Click to expand...
Click to collapse
Busted.
Sent from my Galaxy Nexus using Tapatalk 2
respider said:
nexus 4
Click to expand...
Click to collapse
Offtopic, but wow!! That's a scary avatar
i take mine off all the time!!!! and i have NOOOO ISSUES
delsus said:
Show iSheep why a removable back is so awesome... Get on ebay and buy a new one, they are really cheap (thank you plastic) then laugh at the iSheep you know who have to send it in for service when their precious chicken foil gets scratched.
Click to expand...
Click to collapse
This ^^
Samsung will probably claim user damage and take no responsibility anyway so hit ebay and get a new one.
Take the chance and show the iSheep what customization is all about - I've even seen a carbon fibre one for less than $10. A regular plastic one is even cheaper and there are all kinds of covers, plenty to choose from.
I have a crack like that too. And the white around the Samsung letters have also started flaking off.
9000r said:
I have a crack like that too. And the white around the Samsung letters have also started flaking off.
Click to expand...
Click to collapse
Buy one from ebay, you can buy metal/poly-carbonate and other sexy backs, or a very cheap regular one.
my white:silly: iphone 3gs developed similar cracks all by its self , i think something is wrong with the quality cuz my 3 weeks old galaxy s3 doesnt have any yet hopefully not in the future
Thanks for the responses, but I think a lot of people are missing the point. The back case is not fit for purpose. Yes I could easily go onto eBay and buy a new one and there are loads on there to choose from. As for iSheep, I've owned 4 iPhones previously and if I had this issue with any of them whilst still in warranty, Apple would have replaced my handset with out much hassle.
If Samsung ever get back to my support query and suggest that the cracks are caused by myself i'll be really disappointed. People can complain all they want about Apple products but their customer service is second to none when devices are still in warranty.
Flame away......
Same problem with my back cover, and only one point I change battery twice a day I will regular basics since 3 month so I do expect some wear and tear
Sent from my GT-I9300 using Tapatalk 2
gooshy said:
Thanks for the responses, but I think a lot of people are missing the point. The back case is not fit for purpose. Yes I could easily go onto eBay and buy a new one and there are loads on there to choose from. As for iSheep, I've owned 4 iPhones previously and if I had this issue with any of them whilst still in warranty, Apple would have replaced my handset with out much hassle.
If Samsung ever get back to my support query and suggest that the cracks are caused by myself i'll be really disappointed. People can complain all they want about Apple products but their customer service is second to none when devices are still in warranty.
Flame away......
Click to expand...
Click to collapse
Actually, from someone who worked at an applecare call center, I will disagree. We were actually instructed to always try to make it the user's fault if possible. It's easier than one would think. That and gut customers saying they're only covered for 1 year when you actually have 2 under Europe's laws. Only when the customer insist A LOT and starts citing laws, were we allowed to escalate the call to a second tier operator who'll still try but most likely end up complying with the customer's request for that 2nd year.
I could go on forever with the **** they have us pull on the customers (some are real asshats that actually deserve though)
Not saying Samsung's any better, I actually don't know how Samsung's service is (hell, I'm actually not expecting it to be any better) but trust me, Apple is not there for the customer, that I know. If you experienced better with Apple, I'll actually be glad since I wasn't cool with their behavior by any means.
Let us know how it turns out please
I bent mine in half and all the paint fractured on it, thought they were really flexible, I guess not
I few months ago i posted a thread with this same issue...
well, a few weeks later, I managed to fix my problem with a "non-cientific" method... to say at least... but it worked for me, don't know why... I removed the back cover... plugged the usb cable on the phone and put the back cover back to the phone with the usb cable plugged in... checked to see if it was properly fitted ... and believe it or not.. the crack on back case was gone...
give it a try... maybe works for you too
Hi all, I got a good deal on a used z3v(came from nexus 6 just wasn't feeling it much) I love this phone but I have a question the person I bought it from had removed the micro SD and USB flap that makes the phone waterproof (hence the reason I got such a good deal ). My question is where do I buy a replacement I see a replacement flap for the normal z3 on ebay, will it fit the z3v? Or with this phone being so similar to the z2 would i need to order one for that one?
Whoa whoa, that's an awfully terrible thing someone would do to this phone. Removing the flaps is like saying "please let me drive my car without tires and see how this will work".
You would have to get Sony to repair your phone for you because the phone is sealed tight, preventing you from physically modifying it of the sorts.
GigaSPX said:
Whoa whoa, that's an awfully terrible thing someone would do to this phone. Removing the flaps is like saying "please let me drive my car without tires and see how this will work".
You would have to get Sony to repair your phone for you because the phone is sealed tight, preventing you from physically modifying it of the sorts.
Click to expand...
Click to collapse
So the replacement z2 or z3 flaps I see on ebay won't work?
Gcforreal01 said:
So the replacement z2 or z3 flaps I see on ebay won't work?
Click to expand...
Click to collapse
If they are the Z3V Variant then yes those will work. Any other Z2 or Z3 flaps that are not Verizon will not work.
That sucks since even cases for the Verizon variation is hard to find, oh well still a nice phone and I paid next to nothing for it so no worries as even when I had my s5 I never dunked it in water anyways. Thanks for the advice
Gcforreal01 said:
That sucks since even cases for the Verizon variation is hard to find, oh well still a nice phone and I paid next to nothing for it so no worries as even when I had my s5 I never dunked it in water anyways. Thanks for the advice
Click to expand...
Click to collapse
I would be real careful with it though. Anything intruding into your phone can easily ruin it. It looks to me there's next to no protection for anything to enter without the flap. You should get a case that at least covers the exposed areas somehow.
How is that different from any other phone without protective covers on the USB? Not being a smart ass just asking. I have a otterbox defender but annoyingly it doesn't cover the flap area
Gcforreal01 said:
How is that different from any other phone without protective covers on the USB? Not being a smart ass just asking. I have a otterbox defender but annoyingly it doesn't cover the flap area
Click to expand...
Click to collapse
If you look through the side where the micro usb port is, you can see the holes to see the internal where the display lights up. I feel as though dust can easily ruin the quality of the display or ruin the camera lens in the phone from taking great quality pictures.
I got one on ebay. Should be here tomorrow. Shipping was slow but it said it's the original part. Sony would not send me one. They offered to fix my phone for a fee if I mailed them the phone (I didn't get that far so I don't know how much). Here's the link.... Maybe they still sell them. Contact the seller, see what they say... http://pages.ebay.com/link/?nav=item.view&id=131457513807&alt=web
Sent from my D6708 using XDA Free mobile app
Well let us know how the installation goes and how the fit of the replacement is
hexto said:
I got one on ebay. Should be here tomorrow. Shipping was slow but it said it's the original part. Sony would not send me one. They offered to fix my phone for a fee if I mailed them the phone (I didn't get that far so I don't know how much). Here's the link.... Maybe they still sell them. Contact the seller, see what they say... http://pages.ebay.com/link/?nav=item.view&id=131457513807&alt=web
Sent from my D6708 using XDA Free mobile app
Click to expand...
Click to collapse
Depending on how it goes and how difficult it is, if you want to of course..... make a small guide on how to put on those flaps. That might be helpful for some users in the future. Just throwing out an idea.
Bruce Lee said:
Depending on how it goes and how difficult it is, if you want to of course..... make a small guide on how to put on those flaps. That might be helpful for some users in the future. Just throwing out an idea.
Click to expand...
Click to collapse
That's a great suggestion. I don't mind at all and would like to share. From what I can tell in my research, the port is designed like the Z1 and should not be difficult to install.
I just looked at the USPS tracking and my package arrived in Brooklyn NY tonight at 9:58pm. I'm in CT but doubt I'll get delivery tomorrow so it looks like Monday.
I'll be sure to post details. I'm glad to help others. I've sure have been helped more times than I care to admit by others. Besides, I can use some "Thanks" on my profile ?
Sent from my D6708 using XDA Free mobile app
I just noticed mine snapped off some time today. Can't find it anywhere. Really hope this works out for you and that there will be more stock...
Stormwing said:
I just noticed mine snapped off some time today. Can't find it anywhere. Really hope this works out for you and that there will be more stock...
Click to expand...
Click to collapse
Me too. Hope to get it tomorrow. The USPS tracking hasn't been updated since Friday but it was close. Fingers crossed
Sent from my D6708 using XDA Free mobile app
Quick question: anyone know if there's a difference in port cover color between the white and black Z3Vs?
Stormwing said:
Quick question: anyone know if there's a difference in port cover color between the white and black Z3Vs?
Click to expand...
Click to collapse
I doubt it. It's just the aluminum strip that's on the outside that show. Inside isn't different at all.
GigaSPX said:
I doubt it. It's just the aluminum strip that's on the outside that show. Inside isn't different at all.
Click to expand...
Click to collapse
Actually, upon further inspection, I'm positive there's a difference. I found a couple European sites offering Z3V parts, expressly labeled as Black or Silver. Before anyone gets too excited though, none of them have the USB covers in stock.
Display Doktor/World of Mobiles (looks like the supplier from hexto's link)
Magboss.eu
Stormwing said:
Actually, upon further inspection, I'm positive there's a difference. I found a couple European sites offering Z3V parts, expressly labeled as Black or Silver. Before anyone gets too excited though, none of them have the USB covers in stock.
Display Doktor/World of Mobiles (looks like the supplier from hexto's link)
Magboss.eu
Click to expand...
Click to collapse
Seems unlikely that the port cover would be different other than in color. Try chatting with Sony. I did that when I was trying to see if they would sell me the part and they were pretty helpful. I chatted right from my phone using Chrome browser.
My port cover didn't arrive today. So annoying. I'm in CT and the package left Brooklyn, NY at 5:46am on Saturday. It should've been delivered today. Damn 3rd class mail. I feel like I've gotten straight from China packages quicker.
Sent from my D6708 using XDA Free mobile app
Yeah, I just mean the exterior color. Still want it to be the most perfect though. The white definitely has a lighter silver trim, while the black has a darker, slate grayish silver.
Black and White comparison video
My port cover arrived and after about a half hour of failed attempts I figured out how to easily install it without damaging it.
Unfortunately, the damn thing won't fit. It looks perfect but it won't stay closed. I have to press it hard so it closes but it pops right back open on it's own. Nothing like the other ports. I've contacted the seller. Hopefully they will make it right.
I did learn how to install it and will post the video tomorrow. For now, here are two pix showing the ill-fitting cover.
Waited 20 days for this crap ?
Sent from my D6708 using XDA Free mobile app