Hello Everyone!
I am facing a bootloop problem after restoring a complete Nandroid recovery.
1). I created a full backup of my system using "Online Nandroid Backup Pro".
2). I rebooted into the recovery mode using Team Win Recovery (TWRP).
3). I restored the full backup from there.
4). After rebooting into the system, i got stuck with the bootloop problem.
Any suggestions, solutions, or ideas would be greatly appreciated.
Thanks in advance for your time and help!
Get a full Update image of original firmware (UPDATE.APP) 3Go . put it in a folder named : dload on your SD card
press Volume + , Volume - and power at the same time....and thats it
croisade said:
Get a full Update image of original firmware (UPDATE.APP) 3Go . put it in a folder named : dload on your SD card
press Volume + , Volume - and power at the same time....and thats it
Click to expand...
Click to collapse
Thank you very much for your reply.
I have tried your method above just now. I am ending up with the TWRP mode when i click Volume +, Volume -, and power at the same time.
Is there any other way to load the original ROM? Thanks.
Up ! I have also a reboot issue ! how to totally reflash factory the phone ?
Related
Hey guys, I have a Star A2000 with Froyo rooted. While I was trying to modify my original status bar, the phone blocked and I had to reboot it. I rebooted it but for over one hour it's loading whithout booting into the homescreen. I tryed with the factory reset but nothing. I can't load any rom from Linux, and so I can't fully on the device. Any suggestion? I want to bring back everything! Anybody knows how I can do so? Without the flashing cable is it possible to restore or put back the original system and settings?
recovery menu
Turn off the phone
press vol up and power button in the same time
that will bring you to the recovery menu - press home key to see options
navigate trough options with vol up and down and meniu
take care - reset to factory my wipe your imei off. if you are lucky this might not happen
also read here:http://forum.xda-developers.com/wiki/index.php?title=Chinese_Clones_MTK6516
I've tried this way all the time but it seems to don't work
Is there not an update.zip in other to install the original rom? Because I'm not with the flashing cable so I can't use it to flash. Is there any other way I can do it?
If you cant access the recovery by using power button + volume up key at the same time when turning on the phone then the recovery partition is not working (should show up with android ! screen or custom recovery) - If you cant boot in to the recovery menu or the system partition containing the OS you have likely bricked your phone, the only chance you may have in my opinion is a factory reset - which you say has failed or connect usb while phone is booting and hope you can get an ADB connection (which is possible due to a bug but only seems to work intermittantly - I have managed to fix a brick via this stroke of luck before)
Having a backup as well as a working recovery or system partition is the key to playing with your phone - one partition should always be working to restore the other when or if it fails.
[email protected] said:
If you cant access the recovery by using power button + volume up key at the same time when turning on the phone then the recovery partition is not working (should show up with android ! screen or custom recovery) - If you cant boot in to the recovery menu or the system partition containing the OS you have likely bricked your phone, the only chance you may have in my opinion is a factory reset - which you say has failed or connect usb while phone is booting and hope you can get an ADB connection (which is possible due to a bug but only seems to work intermittantly - I have managed to fix a brick via this stroke of luck before)
Having a backup as well as a working recovery or system partition is the key to playing with your phone - one partition should always be working to restore the other when or if it fails.
Click to expand...
Click to collapse
HI !
I´m on the same situation.
After install de CW recovery, made 3 nandroid backups of different states of my phone and tryed to flash 3 different ROM MODs (including the ICS 4, hahaha) i bricked my A2000-GPS.
I´m able to enter CW recovery menu using PWR+VOL.UP and navigate as well. I wiped all data, cache partition and try to restore all my backups one by one... Nothing brings back my OS... I still stucked into boot screen (the first one, i´m not entering in the boot_logo image...
After many tryes, i wiped all data again and made a factory reset using CW recory: Nothing...
I notice that i´m loose the factory recovery mode (PWR + VOL.Down)... And i also never made an IMEI backup. Could be that?
I apreciate any help. Any light in the end of tunel, hahaha
Kind regards!
------------------------------
Updating:
- I´m using the ClockworkMod Recovery V4.0.0.5.
- My CWM recovery is able to read my SD card, so i can put any .img or .zip file inside it.
I format the folders:
/boot
/cache
/data
/system
Into "Mounts ans Storage" menu.
After I recovery one of my nandroid backups. Normal rebooting and.........................
NOTHING ! I´m still stucked into first boot img.
It´s normal this screen delays like 15 ~ 20min. to disapear?
Hi.
related with CWM I also have a weird issue.
My wife's old A2000 is now in my hands to play with it. The phone was virgin (stock rom no rooted).
I rooted the phone and installed cwm/rom manager.
The weird issue is:
1) If I click in Rom Manager option " Reboot into CWM" the phone reboot in CWM with all options working including rom backup.
2) starting with th phone off I press the keys power + vol.up Iget not the CWM but the "fatory Mode" green menu with 6 options (Full test, Test Report, Clear flash, version and Reboot).
3) pressing power + vol.down it simply boot normay the system.
What can be wrong with this "ex-virgin" A2000?
Hey Guys,
I triied to flash my Pantech burst via ROM Manager with CWM 6.0.1.5 and it resulted into Bricking my beloved Device:crying: i tried to Restore my Backup(that i took earlier) bt didnt worked device just shows Pantech Logo and after sometime screen go off, then i tried to Upgrade it again with Pantech OS upgrade Tool, It upgrades successfully but doesnot boot up again i tried several time by putting it in S/W Upgrade mode....nothing happened
plz guys help me out how can i get my phone work again....i dnt have warranty as i'm from India.....and cant afford a new Phone too....is there anyway to recover or i'm screwed....plz guys will be very thankful:crying::crying::crying:
Anyone?
coolamjadkhan said:
Anyone?
Click to expand...
Click to collapse
Did you fix this yet?
http://rootzwiki.com/topic/33145-root-cwm-pantech-burst/
scroll down a ways and there is a method for restoring stock rom with cwm
Alternative method for stock JUUS03122012 and Recovery:
1-Download PANTECH_PRESTO_BIN_JUUS03122012.pdl
2-Download P9070_Download_Tool_v3.3.zip and extract it
3-Boot phone into Emergency Download Mode - With device off, press and hold power + Volume Up + Volume Down
4-Execute P9070_Download.exe
5-Select “Open File” and select the PANTECH_PRESTO_BIN_JUUS03122012.pdl file
6-Select “Reload File”
7-Select Download
8-Just select the default location for the XML log file
*I had to do this twice as it failed the first time and the second time it was successful
IAmTheDarkOne said:
Did you fix this yet?
http://rootzwiki.com/topic/33145-root-cwm-pantech-burst/
scroll down a ways and there is a method for restoring stock rom with cwm
Alternative method for stock JUUS03122012 and Recovery:
1-Download PANTECH_PRESTO_BIN_JUUS03122012.pdl
2-Download P9070_Download_Tool_v3.3.zip and extract it
3-Boot phone into Emergency Download Mode - With device off, press and hold power + Volume Up + Volume Down
4-Execute P9070_Download.exe
5-Select “Open File” and select the PANTECH_PRESTO_BIN_JUUS03122012.pdl file
6-Select “Reload File”
7-Select Download
8-Just select the default location for the XML log file
*I had to do this twice as it failed the first time and the second time it was successful
Click to expand...
Click to collapse
I tried this and it stucks in S/W Upgrading mode....
can u plz explain in detail how u got this working.
Unfortunately and I guess also fortunately I haven't had to do this on my phone yet. Is fast boot entirely inaccessible as well?
Sent from my PantechP9070 using xda premium
Hi all,
i got an bootloop at my Presitigo PMP5580C (same as Intenso TAB 814). The recovery mode (Power + vol+) wont work.
How to flash the firmware to the tablet?
I installed Android SDK and the Drivers. But what to do now? What Software did i have to use to flash und what file (Firmware) to flash?
Please help me...
Regards
Hi,
any ideas? I need your help...
I also have such a problem with my PMP5580C DUO.
It just hangs on the Bootscreen with the "The Art Hi-Tech" and the logo.
No chance to get into cwm with power+vol up and even the Hardresetbutton just switches the tablet off.
Can someone help? Or did you find a solution yet?
Thank you very much
W3hrWolf said:
Hi all,
i got an bootloop at my Presitigo PMP5580C (same as Intenso TAB 814). The recovery mode (Power + vol+) wont work.
How to flash the firmware to the tablet?
I installed Android SDK and the Drivers. But what to do now? What Software did i have to use to flash und what file (Firmware) to flash?
Please help me...
Regards
Click to expand...
Click to collapse
Have you tried to put the update.zip file and recovery image on an SD card ?
If not do that then press (Volume +) + (Power) buttons then when the screen flashes stop pressing the (Power) button and keep pressing the (Volume +) button after some time it will start flashing the Tab.
Here is the link if you don't have the update.zip file :
http://www.prestigio.com/catalogue/Archive_products/Multipads/MultiPad_8.0_Pro_Duo#/product-support/firmware
use the 2.0.24 version.
Hope this helps
If not tell me so I can give you another way by using CWM.
Waiting for your reply...
pmp5580c bootloop
Zacktamondo said:
Have you tried to put the update.zip file and recovery image on an SD card ?
If not do that then press (Volume +) + (Power) buttons then when the screen flashes stop pressing the (Power) button and keep pressing the (Volume +) button after some time it will start flashing the Tab.
Here is the link if you don't have the update.zip file :
use the 2.0.24 version.
Hope this helps
If not tell me so I can give you another way by using CWM.
Waiting for your reply...
Click to expand...
Click to collapse
Hi, my friend has the PMP5580c and it too will not go to recovery at all. it just hangs in a boot loop on the start up screen. I have tried the recovery combination, but it does not work. how would I go about flashing the firmware/update.zip file using CWM.
AzahTabor said:
Hi, my friend has the PMP5580c and it too will not go to recovery at all. it just hangs in a boot loop on the start up screen. I have tried the recovery combination, but it does not work. how would I go about flashing the firmware/update.zip file using CWM.
Click to expand...
Click to collapse
Do you have a CWM flashed already or not?
If so then I had this problem before you just need to put the update.zip on the root of the SD card then press the recovery buttons for some time like 2 minutes -some times it takes so long but it works- .
reply to me soon.
Bootloop fixed
Hi Zack.
I was able to get it sorted with fastboot. Needed the laptop to register the m3-chip that it was saying was the tablet. Once that was done, flashed it with the original stock firmware. It now runs like it was brand new.
Thank you all for your time on this matter
AzahTabor said:
Hi Zack.
I was able to get it sorted with fastboot. Needed the laptop to register the m3-chip that it was saying was the tablet. Once that was done, flashed it with the original stock firmware. It now runs like it was brand new.
Thank you all for your time on this matter
Click to expand...
Click to collapse
hi, i have the same fault on the same tablet, how do i fastboot? also when connected to pc it is saying it is a world cup device? thanks in advance
Bricked PMP5580C
Hello
I have bricked my Intenso Tab 814 (same as Prestigio PMP5580C). I formated the bootloader space + the recovery space, and now I can't even turn it on. The backlight of the display isn't glowing up at least. So I used my MicroUSB cable and connected to the computer, it is recognized by the computer, but I can't flash anything back with the amlogic software which I've got, I am really appreciating when someone of you can try to help me out,
thanks in advance,
AMLOGIC
Unbricked Intenso Tab 814
I have successfully unbricked an Intenso Tablet 814 also know as Prestigio PMP5580C! It had no bootloader and all partitions were formatted! This includes the bootloader, means it even showed backlight as I plugged it into the power supply. I got a rescue sd card made with Christian Troys tutorial but my tabket was nit abke to start, because the nand chip was corrupted, so I looked at the nand chip and used a scrwwdriver and put it on the 6 and 5 th point t the right side on the left side is the hole on the nand chip, after that I was able to permitt the access for the nand chip to the mainboard, so it booted from the sd card automaticaly,
Intenso Tab 814 can be unbricked! Yeah, now I need it's source to customize the recovery and boot splash + oneday the os,
Take care!
Bye bye!
Stuck in bootloop intenso tab 724
So the title says it all how can I fix it? No custom recovery only root
I successfully rooted my huawei g610 u20, and installed a couple of rooted apps. Last night I installed the Root toolkit app for changing my phone's fonts and it never booted since then. I cant get passed by the boot animation and it gets stuck on the huawei logo. I have no idea what to do. I googled up a couple of solutions with no luck. I did find one or two roms but I don't know how to flash them since I don't have a custom recovery installed. All I have is the Android system recovery <3e> (which I can activate by pressing the vol up + power button). But it wont let me install any rom from sd. Help would really be appreciated guys. ;(
Search for your phone firmware on google, copy the dload folder on your SD card (using a sd card writer) and press the power button and the vol up and the vol down at the same time
johndroid1999 said:
Search for your phone firmware on google, copy the dload folder on your SD card (using a sd card writer) and press the power button and the vol up and the vol down at the same time
Click to expand...
Click to collapse
How do I know that which firmware version should I use?
HamzaLV said:
How do I know that which firmware version should I use?
Click to expand...
Click to collapse
Google "Huawei G610 u20 stock firmware download" and you should find it, then follow my instructions
can you find me a rom for G610 U20 in English and support arabic ples :angel:
Hello Members
I Have Hard Bricked Huawei Y6 Pro [TIT-AL00] "No Recovery" "No Fast Boot Mode" And Mobile Hang On Huawei Logo
Please Help:crying::crying::crying:
You need to give more information so people can help you.
What were you doing just before this happened?
Does it charge when plugged in?
Have you tried to fix it? if so what have you tried?
Anything else that might be relevant!
shakirbaloch said:
Hello Members
I Have Hard Bricked Huawei Y6 Pro [TIT-AL00] "No Recovery" "No Fast Boot Mode" And Mobile Hang On Huawei Logo
Please Help:crying::crying::crying:
Click to expand...
Click to collapse
Hold volume down and power at same time
shanman-2 said:
You need to give more information so people can help you.
What were you doing just before this happened?
Does it charge when plugged in?
Have you tried to fix it? if so what have you tried?
Anything else that might be relevant!
Click to expand...
Click to collapse
tnx for replying
by mistake i wiped system in twrp recovery
i have unlocked bootloader and twrp recovery
by phone will not go to fastboot mode or recovery option
phone only hang on huwei screen
sorry for bad english
shakirbaloch said:
tnx for replying
by mistake i wiped system in twrp recovery
i have unlocked bootloader and twrp recovery
by phone will not go to fastboot mode or recovery option
phone only hang on huwei screen
sorry for bad english
Click to expand...
Click to collapse
Have you got a back-up?
If so press and hold volume up and press start button to got to twrp and restore your backup.
If no back up , download stock firmware from huawei and also download SpFlashTool and you will be able to flash firmware.
shanman-2 said:
Have you got a back-up?
If so press and hold volume up and press start button to got to twrp and restore your backup.
If no back up , download stock firmware from huawei and also download SpFlashTool and you will be able to flash firmware.
Click to expand...
Click to collapse
phone not able to go to recovery and fastboot mode
:crying:
shakirbaloch said:
phone not able to go to recovery and fastboot mode
:crying:
Click to expand...
Click to collapse
Then try the second option. You will have to do a bit of reading but I am pretty sure you will be able to get it going again.
shanman-2 said:
Have you got a back-up?
If so press and hold volume up and press start button to got to twrp and restore your backup.
If no back up , download stock firmware from huawei and also download SpFlashTool and you will be able to flash firmware.
Click to expand...
Click to collapse
I downloaded a stock rom form your huawei link
but it is SD Card update file
its not a sp flash tool file :cyclops:
please give me sp flash tool file link if you can find one
sorry again for my bad english
shakirbaloch said:
I downloaded a stock rom form your huawei link
but it is SD Card update file
its not a sp flash tool file :cyclops:
please give me sp flash tool file link if you can find one
sorry again for my bad english
Click to expand...
Click to collapse
Google is your friend, friend!
http://huawei-firmware.com/rom/huawei-y6-pro/titu02/133
shanman-2 said:
Google is your friend, friend!
http://huawei-firmware.com/rom/huawei-y6-pro/titu02/133
Click to expand...
Click to collapse
thanks but this is also sd card update file link no sp flash tool
It has instructions on how to install update.app firmware, have you tried it?
did you fix your problem .. i have same problem here
above
hello, this works for me everytime . This problem mostily occurs when you wipe or clean a catch memory in huawei TIT-u02 /A00 .
if you can not access the recovery then do the following
1. copy the dload file to you sd card
2.insert the sd card to your phone
3. Press simulitaniousury power+vol up + volume down at once
4.One the phone boots , release only power button while still holding vol up +vol down
5.release vol up +volume down at once when you see android log (installing system update )
Note : the phone will repeat the isntalling system update and errosing more that 6 time . then your phone will restart