{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
#Be_Xeonotic_with_YU
Disclaimer
Code:
#include
/*
* Your warranty is now void.Nah! Just kidding No warranty is void in YU GOD. :)
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features
Common
Compiled with SaberMod 6.0 and Uber 5.0.2
Compiled with latest source
CPU Cluster-1 Overclocked to 2Ghz
Touch Boost
Optimizations
LZ4 Compression Level
Fix high load average from uninterruptible waits
Cortex A53/ARMv8 architecture Tune-Up
Enabled ARCH_POWER
Universal ROM support (x64 bit Roms)
Thunder charge 2.1
KCAL
Dynamic Fsync
TCP Congestion Algorithms
Undervolted
Cortex A53 Optimization Enhanced.
Wake Lock
Page Mapping
and many many more
Governors
intellidemand
smartmax
impulse
Alucard
zzmove
elementalX
yankactive
darkness
internactive
ondemand
userspace
powersave
performance
Hotplugs
IntelliPlug
MSM Hotplug
Alucard
Zen Decision
Auto SMP
Installations Steps:-
Minimum Requirements to Install XeonKernel
This is For ARM 64
Your Device Should be Rooted with Unlocked Boot-loader & Latest Custom recovery Installed.
Recommended Custom Recovery TWRP
1. Boot into TWRP
2. Wipe cache and dalvik
3. Flash Xeon-kernel for Yureka/Yureka+
4. Again Wipe cache and dalvik
5. Reboot to System
Recommended Settings
App:- Kernel Adiutor
Check here :- http://m.imgur.com/a/FJYLH
Alucard isn't avaible in Android 6.0 or CM13 build
Alternative for Alucard you can use MP Decision and Darkness/SmartMax governor.
ChangeLog
r6.5
Added Android M support
Added back all CPU governors
Removed Intelli-thermal (really a bad idea to add it)
Removed Gentle sleeper (Why to keep it when no use?)
Added back cpu booster and hotplug
Reduced the default charge current
Enabled Charge current rate by defualt
And Of course various tweaks from my side for power saving and performance!
Rest changes are same of r6 and new r6
r5
( Common )
> Enabled Pipe Flag
> Add interruptible wait to reduce system load average in msm
> Add Interactive Governor tweaks
> Partial OC till 1.7Ghz ( All revs may not receive OC )
> O3 Optimization with additional flags
> Add Mako Hotplug
> Add new Audio drivers
> Bye Bye Debugs :v
Now Interesting part
( Not seen in other kernels before )
> New Load Freq avoids moire ( 4*HZ + 61 )
> Low memory kill added for_each_thread insteadof while_each_thread
> Implement Fast Idling of CPU when System is partial
> Add Interruptible Thread to Mdss dsi host
> MPM Disabled Debugging
> Interactive Governor added Euclidean CPU relation
> Add new -go, -fvopts,-fno-inline function optimization
> Add Time keeping move clock sync work to power efficient work queue ( For better use of CPU idle time )
> Enabled Conservative governor.
r4
Final Fix for revs issue
Fix random reboot issue
Fix high load due to drivers
Fix Intellidemand wake up issue
Fix Not waking up issue
Enhance Cortex A53 Optimizations
Add Alucard governor
Add Alucard Hotplug
Add All 8 core active while booting for fastest boot
Add Paging table mapping
Compiled with Ofast flag
r3:-
Fixed revs issue
Fixed Bootloop issue
Fixed High temp while charging
Removed 2.0Ghz (Unstable), Does 0.3Ghz really matters ?
New Features (Never seen before in any other kernel for tomato/+)
Frequency lower step down till 100Mhz.
Cortex A53 Optimizations.
r2:-
New LOGO Art.
Decreased default value of thundercharge to 1.3A
Updated SbaerMod toolchain to 6.0
Added One more core while booting to make boot faster.
Added Inbuilt Recommmended settings ( To apply settings just open Kernel Adiutor > settings > tap on test )
Fixed Yankactive
Fixed Input
Fixed Ipv4
kmem Leak ignore fixed
r1:- Intial release
Downloads
For all 5.1/6.0 Roms
Xeon_r6.5_tomato_UBTC.zip : https://www.androidfilehost.com/?fid=24399994186367403
Source
https://github.com/SomeshThakur/Xeon-Kernel
Credits
Varun chitre
Audio God
Faux123
Myfluxi
Special Thanks to Hriday Sharma and Sanyam Jain for intial setting up everything. I would have never release a kernel without them
Continue reading...
XDA:DevDB Information
Xeon.kernel, Kernel for the YU Yureka
Contributors
someshthakur
Kernel Special Features: Stable, Battery+Performance,No bull**it
Version Information
Status: Stable
Current Stable Version: r5
Created 2015-11-17
Last Updated 2015-12-24
Facebook Community Page :- https://www.facebook.com/XeonKernel/
Like to support Ask any query.
Note
Bench-marking:-
Don't believe benchmark scores because they always change time to time. But sometimes they matter lil bit
Performance Drops:-
The recommended settings are setup for both battery+multitasking. If you face any lag or drops then try you custom settings!
Less Battery backup:-
Use Greenify, try Uber build
Camera Fix :- https://yadi.sk/d/GnHae4LTjer7H
Only for Old source based ROMs and Ported ROMs
BroTHer Is THis SuPported in this Rom Link BElow.. plzzz See AnD Tell..
(http://forums.yuplaygod.com/threads/rom-tomato-unofficial-euphoria-os-1-1-5-1-1.11940/)
adiroy1616 said:
BroTHer Is THis SuPported in this Rom Link BElow.. plzzz See AnD Tell..
(http://forums.yuplaygod.com/threads/rom-tomato-unofficial-euphoria-os-1-1-5-1-1.11940/)
Click to expand...
Click to collapse
Yeah! of course
someshthakur said:
Yeah! of course
Click to expand...
Click to collapse
BrotHer HavE u Seen THe link THat I HavE atAched..??plzzz See iT tHen TEll.. coz IT was OLder EuPHoriA Rom.. nOt NEw oNe..!!
Miui 7 global build supported?
is it support miui v7 china build
WOW..!
Simply put .. the best kernel ever.!
Battery backup is very good and so is the performance n stability
Thanks a ton Somesh
is it support miui v7 china build
Will it work on stock cm12????
Sent from my Nexus 4 using XDA Free mobile app
adamnp2000 said:
is it support miui v7 china build
Click to expand...
Click to collapse
Yes! You need to flash camera fix may be...
gtsfreak said:
Will it work on stock cm12????
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Yes! You need to flash camera fix.
u_knw_who said:
Miui 7 global build supported?
Click to expand...
Click to collapse
Yes! You need flash camera fix because its based on old tree.
adiroy1616 said:
BrotHer HavE u Seen THe link THat I HavE atAched..??plzzz See iT tHen TEll.. coz IT was OLder EuPHoriA Rom.. nOt NEw oNe..!!
Click to expand...
Click to collapse
Check if everything works fine. Camera may be not working that you need to flash fix
Xeon™ r2ChangeLog
New LOGO Art.
Decreased default value of thundercharge to 1.3A
Updated SaberMod toolchain to 6.0
Added One more core while booting to make boot faster.
Added Inbuilt Recommmended settings ( To apply settings just open Kernel Adiutor > settings > tap on test )
Fixed Yankactive
Fixed Input
Fixed Ipv4
kmem Leak ignore fixed
Download
which is the best for miui saber mod or uber.can you please give me camera fix link of miui
adamnp2000 said:
which is the best for miui saber mod or uber.can you please give me camera fix link of miui
Click to expand...
Click to collapse
Try SaberMod for performance and Uber for battery life.
Here is the Camera fix for all roms based on old device tree.
Link:- https://docviewer.yandex.com/?url=y...ra-Fix.zip&name=Camera-Fix.zip&c=5648714b8fa7
does it support blisspop rom
someshthakur said:
Try SaberMod for performance and Uber for battery life.
Here is the Camera fix for all roms based on old device tree.
Link:- https://docviewer.yandex.com/?url=y...ra-Fix.zip&name=Camera-Fix.zip&c=5648714b8fa7
Click to expand...
Click to collapse
According to u which is the best kernel mod to download for stock cm12?????????
which kernal is better for blisspop saber or uber
Related
ENJOY RAZOR SHARP OPTIMIZATIONS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SOURCE
DISCLAIMER :
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
FANPAGE (FACEBOOK ) : https://www.facebook.com/razorreborn
Features :
Build on Updated Sources.. for Marshmallow Thanks to nick37332001,kumajaya,zwliew,Tarun93
Better battery management.. Respect HMP.. Better Conservative . tweaked little
Use all cores for booting
TCP added,Custom IOSCHEDULERS ADDED
Custom governors include ALUCARD, ELEMENTALX, DARKNESS, IMPULSE, YANKACTIVE
Custom Hotplugs Include ALUCARD,BRICKED and CLUSTERPLUG
Dynamic Fsync.. thanks to Varun Chitre
KCAL drivers added..
Powersuspend..
VIbrator Intensity Control
disabled KSM
CPU OC to 1.4Ghz
power efficient workqueue
exFAT support
Selinux Permanently Permissive
disabled crc Check upto 30% performance improvement
misc tweaks,Stability tweaks
-o2 optimisation
Thermal Throttle temp control from userspace .. Thanks franciscofranco
Bumped Kernel version to 3.10.96
kernel: use the gnu89 standard explicitly
Fix high load average from uninterruptible waits
INSTALLATION STEPS:
Minimum Requirements To Install RaZorReborn Kernel:
CM13
Rooted with custom Recovery (TWRP) ( YOU WILL HAVE IT, Without it you cant flash cm13 lol )
Installation Procedure:
Boot Into Recovery Mode
Flash provide Kernel Zip
Reboot To System
CHANGELOG
* Release v2.7
Fixes with Ramdisk
Updated to 3.10.96
Bringback BootSplash
Removed CPU_BOOST
Fix Charging
Disable Thunderplug by default as it causing working of two hotplugs by default..!!
* Release v2.6
SELINUX Enforcing by default
Interactive little quicker in volting down
Optimized SLUB
Added Generic TouchInput Notifier
Fix Occasional Slow Sync
Update Random
* Release v2.5
Rebased to latest CAF
Latest merges from kernel.org
THunderplug - A custom Hotplug by Varun. Chitre
Some more tweaks..!!!
Updated KCAL
* Release v2
Rebased Kernel
Update to latest CAF
Updated to 3.10.94
Fixed SElinux Stuffs
Fixed Random Reboots
And Some More fix.. forgive me.. just lazy to write up ...
* Release v1.0r2
Add MAKO hotplug
Replace TUX logo with razor Logo
Some Tweakks..
* Initial Release v1.0
KERNEL PREFERED APP :- KERNEL AUDITOR
CREDITS
@varun.chitre15
@AdiShakthi
@nick37332001
@ketut.kumajaya
@zwliew
@Tarun93
DOWNLOAD LINK
DOWNLOAD LINK
https://basketbuild.com/devs/razorSharp/Redmi_2/RazorReborn
OLD BUILDS
DOWNLOAD LINK JAN 13 V2.6
https://www.androidfilehost.com/?fid=24369303960684339
Build V2.5
DOWNLOAD LINK JAN 13 V2.5
https://www.androidfilehost.com/?fid=24369303960683884
Build V2.0r2
DOWNLOAD LINK JAN 02 V2.0r2
GCC 4.9 BUILD -AndroidFileHost
Build V1.0r2
DOWNLOAD LINK DEC 28 V2
GCC 4.9 BUILD -AndroidFileHost
Build V1.0r2
DOWNLOAD LINK NOV 22 V1.0r2
UBER 4.9 BUILD -AndroidFileHost
UBER 6.0 BUILD -AndroidFileHost
DOWNLOAD LINK NOV 22 V1.0[/B]
UBER BUILD -AndroidFileHost
RECOMMENDED SETTINGS
GOVERNOR : Darkness
CPU FREQ : 200-1209 MHz
IOSCHEDULER : bfq
TCP : westwood
XDA:DevDB Information
[22/11][Kernel][3.10.93][CM13] RazorReborn� v1.0 [Uber 6.0][Powersuspend]
Contributors
Kiran Anto
Source Code: https://github.com/kirananto
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: RazorReborn v2.7
Beta Release Date: 2016-01-31
Created 2015-11-22
Last Updated 2016-01-31
Features: "Hello" XDXD
Good work anyways.
Reserved !!
Works fine . But I can't find an option to enable the darkness governer.
zeomal said:
Works fine . But I can't find an option to enable the darkness governer.
Click to expand...
Click to collapse
Check from Kernel Adiutor... !!!
Kiran Anto said:
Check from Kernel Adiutor... !!!
Click to expand...
Click to collapse
Did that exactly. Most other common ones are there. No darkness governer though.
zeomal said:
Did that exactly. Most other common ones are there. No darkness governer though.
Click to expand...
Click to collapse
Its showing up for me.
nick37332001 said:
Its showing up for me.
Click to expand...
Click to collapse
I am being shown yankactive, elementalx, impulse, interactive, conservative, ondemand, userspace, powersave and performance only. Can't find darkness.
Guys...!!!
KERNEL UPDATED... CHECK OP....!!!!
I'm working on the MSM8916 based kernel for Lenovo A6000.
I have one doubt, are you able to change the hotplug governor from Kernel Auditor?
I have an issue, I don't ass newly added hotplug governor (alucard or bricked or other)
And one more doubt, which files did you edit to add overclocking?
Kindly let me know if you can help me.
Just Check my github buddy... if more doubts.. pm me on telegram./ @Razorsharp
Kumjaya fixed the noise while recording video in his source kindly integrate that.
also i faced random reboots while using interactive kernel. But had no problem with Darkness.
KEKEMON said:
Kumjaya fixed the noise while recording video in his source kindly integrate that.
also i faced random reboots while using interactive kernel. But had no problem with Darkness.
Click to expand...
Click to collapse
Here is the new build..
ooops.// this is a cyanogenmod build by me.. with razor kernel integrated to it...!!!!
just feel the awsomenesss..!!!
https://www.androidfilehost.com/?fid=24269982087012815
here is the new build ;
updated to 6.0.1r3
onedrive link :- https://onedrive.live.com/redir?resid=B03DF2FA3747F73B!2343&authkey=!AMpkPRmd1RZF5HQ&ithint=file,zip
androidfilehost --- https://www.androidfilehost.com/?fid=24269982087013725
Kiran Anto said:
here is the new build ;
updated to 6.0.1r3
Click to expand...
Click to collapse
working/non-working? bugs? tips\tricks\advices?
i'm very pleased with ressurection remix 5.5.9 by @nick37332001 who just rolled out a new build introducing some serious sh***t
but am eager to lose my virginity with MM
>> so performance-wise can it reach LP?
thanks for your efforts!
Kiran Anto said:
Here is the new build..
ooops.// this is a cyanogenmod build by me.. with razor kernel integrated to it...!!!!
just feel the awsomenesss..!!!
https://www.androidfilehost.com/?fid=24269982087012815
Click to expand...
Click to collapse
what are the bugs is it the same camera and proximity lag and recommended Gapps and do i have to do that setup wizard removal thing i do in other kuma builds
crullick said:
working/non-working? bugs? tips\tricks\advices?
i'm very pleased with ressurection remix 5.5.9 by @nick37332001 who just rolled out a new build introducing some serious sh***t
but am eager to lose my virginity with MM
>> so performance-wise can it reach LP?
thanks for your efforts!
Click to expand...
Click to collapse
KEKEMON said:
what are the bugs is it the same camera and proximity lag and recommended Gapps and do i have to do that setup wizard removal thing i do in other kuma builds
Click to expand...
Click to collapse
Guys this build is almost bugless.. except camera.. but ive replaced camera app with a working camera......
still need to fix the bug with camera... im trying..!!!!
rest all you can see ...
https://www.facebook.com/razorreborn
check here for more... !!!!
here is new build of cyanogenmod....
https://www.androidfilehost.com/?fid=24269982087016624
.here is the boot.img
flash it after flashing rom... to fix sensors...
https://www.androidfilehost.com/?fid=24269982087016765
Soft bricked on Kumajaya's CM13
After flashed, it seems that there is no /system to boot so the phone boots back to TWRP
Kiran Anto said:
here is new build of cyanogenmod....
https://www.androidfilehost.com/?fid=24269982087016624
.here is the boot.img
flash it after flashing rom... to fix sensors...
https://www.androidfilehost.com/?fid=24269982087016765
Click to expand...
Click to collapse
One question: boot.img has to be flashed via fastboot or via twrp?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
Code:
/*
* Your Warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead dogs, or cats,
* but i'm very interest in thermonuclear war, so if you point the finger
* at me for messing up your device just because this kernel, I will
* send you to the mars with Nuclear Rocket. Act accordingly.
* I know this paragraph is conspiracy-included, so
* dont ask about it. Welcome.
*/
this kernel is based on kernel source by kumajaya, branch cm-13.0-wt88047So it just for Marshmallow ROM ONLY
About
Undine-X is my customized Kernel for Wingtech wt88047 a.k.a Xiaomi Redmi 2 with lots of new features.
I started learning about compiling android kernel in mid-March, inspired by some of modified kernel in this device.
Now I'm using kumajaya's kernel source with cherrypicks from some of the greatest XDA kernel developers sources.
Cross-compile
Compiled with HyperLinaro 5.1 Toolchain
Using -Ofast Optimization Flags
Features
MSM Limiter
Power Suspend Mode
Overclock CPU to 1.4GHz
Adreno Idler
MSM Hotplug, Mako Hotplug, and Intelliplug
New CPU Governor : impulse, lionfish, bluactive, darkness, elementalx, nightmare, zzmoove, yankactive
New I/O Scheduler :tripndroid, zen, sioplus, fiops
Advanced TCP Congestion Algorithm
USB Fast Charging (no more slow charging when charging in computer)
Double Tap 2 Wake
Vibration Control
Asynchronous Fsync
KCAL Display Color Control
and moar .....
Installation
Download the zip file
Reboot to your recovery (I'm suggested yo to INSTALL TWRP 3.0.0 to make sure aroma running properly)
BACKUP your BOOT partition (to make it safe so your can easely restore if found any critical problem)
Install the zip file
Choose your preferred options (cpu min/max, governor, selinux mode, etc)
Reboot to system
Preferred Kernel Tweaker App
ReModded Singularity Kernel Adiutor, Download it at my GDrive
NOTE
If you getting some problem,
Send me your log files or I can't help you. Thanks.
/sys/fs/pstore/console-ramoops
/sys/fs/pstore/dmesg-ramoops
Doubletap2wake & Sweep2wake Preview
XDA:DevDB Information
Undine-X Kernel, Kernel for the Xiaomi Redmi 2
Contributors
ichihara.rifa
Source Code: https://github.com/harukachan/UndineX_XR2
Kernel Special Features: Overclock, Aroma Installer, Double Tap 2 Wake, Sweep 2 Wake, Power Suspend, MSM Limiter
Version Information
Status: Stable
Current Stable Version: 1.3.0
Stable Release Date: 2016-04-16
Created 2016-03-27
Last Updated 2016-09-20
Reserved
Download Links
codeharuka-UndineX-1.3.0.zip
ReModded-SKA-20160417.apk
Changelogs
v1.3.0
[new] MSM Limiter v4.0
[changed] Turn down charger rate to 1100 mAh (Avoid hardware issue)
[changed] Some Improvement in UKSM
[changed] Revert Max CPUFreq to 1.4GHz
[removed] Intelliactive Governor (Still not worth for msm8916)
[removed] FauxSound Sound Control (because very buggy)
[changed] Some Improvement in Aroma Installer Themes
[changed] Some Improvement From Cyanogenmod
v1.2.1
[changed] Fix CPU Frequencies Table
[changed] Unlock GPU Frequencies to 720MHz
[changed] Improving I/O latency
[changed] Implement powersuspend to doubletap2wake and sweep2wake
v1.2.02-sid
[new] Unlock GPU Frequencies up to 720MHz
[changed] Fixed Initscript, CPU Frequencies Table, and more, to fix random reboot problem.
v1.2.01-sid
[new] UKSM v1.2.3 (Ultra-Kernel Samepage Merging From http://kerneldedup.org/) This feature make your ram more efficient and more fluid.
[new] Sweep2wake Feature (From Bricked-Mako Kernel by @show-p1984)
[new] Implement Cryptography for LZ4 from berserk @Ashish94
[new] Implement Frandom from berserk @Ashish94
[new] Enable/Disable CRC Scanning (from https://github.com/boype/kernel_tuna_kk44)
[changed] Unlocked CPU Frequencies up-to 1.6 GHz
[changed] Now hwkeys are not active when in suspend mode. Patch from TeslaROM Kernel Source @premaca
X1.1-6-H2O
[new] MDSS Color Control (Formerly KCAL)
[changed] Fix CPU Frequencies tables that can't ramp up to 1.4GHz
[changed] Fix touchscreen random not responding when doubletap2wake activated.
X1.1-4-H2O
[changed] fauxsound: removing all mic tuner to fix low output from microphone during calls (thanks @akash akya)
[changed] touchscreen: add resume when doze (thanks @pirej @zwliew)
[new] installer : add Balanced Preset for new user (when still confuse about setup)
X1.1-2-H2O
[changed] now config restoration placed in ramdisk instead of init.d, to make it still working if the rom not support init.d
[new] Mako hotplug and Intelliplug
[changed] Now the kernel compiled with Hyper Linaro Toolchain GCC 5.1
[new] Add Asynchronous Fsync
X1.1-0-H2O :
Initial publish on XDA
Can i test this with Tesla OS?
Just tried Elix1r, flashed zip and tried fastboot flashing, rom 100% clean and it didn't work.
hardsonic said:
Can i test this with Tesla OS?
Just tried Elix1r, flashed zip and tried fastboot flashing, rom 100% clean and it didn't work.
Click to expand...
Click to collapse
I'm just test on cm13 and aokp only. but you can try it.
don't forget to backup boot partition before flash it.
YACK
Finally made it through xda .. can i request more hotplug .. hehe
please add mako hotplug pleasee.
inpamcoxie said:
YACK
Finally made it through xda .. can i request more hotplug .. hehe
please add mako hotplug pleasee.
Click to expand...
Click to collapse
Added to the my plan
Thanks for suggestion
Great work!
It's raining Kernels for our little precious...
Kudos to all devs ?
more in our phone's development... great news
everything seems good ..but cpu cannot reach 1.4ghz even when the governor was set to performance..other than that its good..pls keep up the effort..
btw i m using tesla rom
ibal97 said:
everything seems good ..but cpu cannot reach 1.4ghz even when the governor was set to performance..other than that its good..pls keep up the effort..
btw i m using tesla rom
Click to expand...
Click to collapse
Thanks for review
imo it's not really "cant reach",
but it optimized so cpu load is still under 1.4ghz.
Performance governor ramp up your CPU at the highest value, it doesn't matter were you are in game or just playing music.
ichihara.rifa said:
Thanks for review
imo it's not really "cant reach",
but it optimized so cpu load is still under 1.4ghz.
Performance governor ramp up your CPU at the highest value, it doesn't matter were you are in game or just playing music.
Click to expand...
Click to collapse
ohh...now i understand.. thanks for the kernel
Thanks イチハラ リファ(Katakana lol) for implementing dt2w. I find it interesting on how you implementing fastcharging in your kernel and wonder does the charging stay at a consistent rate of 1500mA ? Can anyone test it out?
nick37332001 said:
Thanks イチハラ リファ(Katakana lol) for implementing dt2w. I find it interesting on how you implementing fastcharging in your kernel and wonder does the charging stay at a consistent rate of 1500mA ? Can anyone test it out?
Click to expand...
Click to collapse
it depend on hardware, i mean i'm just trying to combine usb fstchg patch with more value at max volt.
well i'm still not tried about it because i dont have tc adaptor that larger than 1000mA :laugh:
lol my english is very bad :laugh:
Good to see the development of redmi 2 now.
Kernels are coming like rain!
Development like this seems unbelievable!
Cheers
-Sourav_8434
nick37332001 said:
Thanks イチハラ リファ(Katakana lol) for implementing dt2w. I find it interesting on how you implementing fastcharging in your kernel and wonder does the charging stay at a consistent rate of 1500mA ? Can anyone test it out?
Click to expand...
Click to collapse
Well I used the Ampere app, the max.amount of current I got was 1010mAh , with constant values revolving around 700-800mAh. Others can also check. I'm using the stock charger.
After install the kernel I can't unlock my phone, I'm using pattern unlock. Everytime that I try to unlock a black screen appears and go back to unlock screen.
I had the same problem with latest version of octopus kenel and I have to use and old version.
Any idea how to fix this problem?
Enviado desde mi Mi-4c mediante Tapatalk
siba01 said:
After install the kernel I can't unlock my phone, I'm using pattern unlock. Everytime that I try to unlock a black screen appears and go back to unlock screen.
I had the same problem with latest version of octopus kenel and I have to use and old version.
Any idea how to fix this problem?
Enviado desde mi Mi-4c mediante Tapatalk
Click to expand...
Click to collapse
I will look into that,
temporary, you can disable dt2w.
ichihara.rifa said:
I will look into that,
temporary, you can disable dt2w.
Click to expand...
Click to collapse
Yup... dt2w is the one causing this problem... the touchscreen doesnt seem to wakeup from touch inputs
Update X1.1-2-H20 [new compiler and hotplug]
Changelogs at first page :laugh:
Ayy my minus is now increased, lmao
no kernel-bugs-related so far....
[i'm more than a noob when it comes to kernel]
this is the only one that made my 紅米2 react properly on dt2w
(feature i missed the most, and coming back big style) {still waiting for a stable berserk to be honest}
8 stars (out of 5) for the looks/user/aroma approach - specially for people not using kernel managers (i'm not 1 of those, but solidarity is important)
has every other "crowd pleasers" working except for control freaks (just kidding) + screen/color profiles << this is not a plea
++ having an option for color-profile would imho make it more than awsome......
great work, even greater kernel, thank you
tipsy by @premaca
recommended settings more than appreciated
Ronflex Kernel
for TW Marshmallow
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
• I'm a student who always wanted to contribute to the XDA community but I didn't have time. There were also many many great developers on my previous devices (Xperia X10 and Galaxy S3) so I didn't have to do things myself, I just had to flash and enjoy.
But on this phone, there aren't many devs, so I began to build things myself. I'm very proud to release my first project ever on XDA .
• I want this kernel to be built by the community with your suggestions of new features and that we discuss together about what we could add to this project, this is very important for me as I am not a dev, but just a beginner. I will try to answer every question that you may ask but please don't ask for ETA as I'm just a student.
• I ask the others devs to be kind with me as I'm still not very familiar with git.
• I'm not responsible for what could happen to your phone by flashing this kernel.
Features:
• Built with GCC 4.8 for stability
• Built with new Marshmallow sources
• init.d support
• Permissive SELinux status
• New governors (give suggestions if you know good governors and hotplugs !)
• New CPU hotplugs
• New IO schedulers
• Disable CRC for better memory speed
• Adreno Idler
• Undervolting (may be buggy)
• Network speed tweaks
• Powersuspend
• Kccal screen calibration
• Fastcharge
• AnyKernel by Osmosis flashing method
Bugs:
• Android logging
Instructions:
• You must be on Touchwiz, it will not work on CM nor Mokee.
• Use a custom recovery
• Download the kernel and put it on the memory of your phone
• Boot into recovery (Home/Vol +/Power)
• Flash the kernel and wipe dalvik and cache
It will reset your kernel adiutor settings to prevent any problem. If you don't want that, open anykernel.sh in the kernel package and change the line do.KAclean=1 to do.KAclean=0.
Share your setup (this is your part guys !):
Please report your best combinations of ROM/governor/hotplug... with stats if possible and I'll add it here
• @spezl config
Changelog:
• V1-
Initial release
• V1.1-
Fix the name string in kernel version
Disable some gov and hotplugs as they were not working
Disable CPU boost, for hopefully a better battery life
• V2-
Hotplugs are back
Underclock (268) / overclock (2880)
Added kcal support for screen tweaks
Prevent some kernel wakelocks
New io schedulers
Fastcharge
• V2.1-
started from scratch
change toolchain : back to gcc 4.8, it will ensure stability
anykernel flashing method : we don't need to include supersu in the kernel package anymore
init.d support
fixed simple-ondemand gpu gov
oc and uc gpu : 166 mhz to 800 mhz
Download links:
Ronflex Kernel 2.1: http://forum.xda-developers.com/devdb/project/dl/?id=18975
Ronflex Kernel 2: http://forum.xda-developers.com/devdb/project/dl/?id=18676
Ronflex Kernel 1.1: http://forum.xda-developers.com/devdb/project/dl/?id=18534 // Mirror
Ronflex Kernel 1: http://forum.xda-developers.com/devdb/project/dl/?id=18526 // Mirror
Stock kernel : http://www.mediafire.com/download/8jeubsas7oiu37p/Stock.zip (thanks to MEGAX91)
Credits :
• Kykint and MEGAX91 for answering my questions
• Tkkg1994 because I spent many hours on his sources to understand how things worked and to fix compilation errors
• The creators of the hotplugs/governors/TC and the other features
And of course hit thanks if you like my work...
XDA:DevDB Information
Ronflex Kernel, Kernel for the Samsung Galaxy S 5
Contributors
licha26
Source Code: https://github.com/badscimmia/Ronflex-Kernel
Kernel Special Features:
Version Information
Status: Beta
Beta Release Date: 2016-05-20
Created 2016-05-20
Last Updated 2016-06-23
Reserved
Recommendations/tips :
• Use this kernel tweaker : Kernel Adiutor Mod. If settings don't stick at boot, set delay to 20 sec, press Test in settings, close the app, wait the 20 seconds and reboot
• If you don't know where to start with the features, interactive + zen decision will give you decent battery life, good overall speed and no heating.
• If you use zzmoove, disable cpu hotplug as it is already built in the governor. To change the profiles of zzmoove, go to tunables, profile number and choose the one that you want. Here's the reference
Ronflex profile :
I managed to create an awesome profile to have both performance (ultra smooth experience) and awesome battery life (1hr screen on + wifi of social networking and surfing = 10%, see the screenshot). Here are the broad lines of the settings:
• The key of this profile is this very interesting xda thread : you can mode the interactive governor to do exactly what you want it to do (especially which frequencies it should use). I applied the settings calculated for our lovely G901F on yankactive governor which is known to be power efficient.
• The hotplug is bricked hotplug, a very efficient hotplug for both performance and battery life
• No overclock, only underclock to 268 mhz
• msm-adreno-tz gpu governor at 240-500 mhz + adreno idler, I don't play games a lot but for instance Alto's adventure is working great with this set up
• No undervolt
• Kccal screen calibration new settings to reduce brightness of the screen. With stock settings, the screen was in my opinion too bright, especially inside and in the dark.
How to apply Ronflex profile ?
• Download RonflexProfile.zip
• Unzip it
• Replace profiles.json with the one you found in my zip in data/data/com.kerneladiutor.mod/files (don't set permissions or the profile will not display !!!)
• In kernel adiutor mod, go to profile, click on RonflexProfile and apply !
hey great work on this kernel !!! if possible could you add more io schedulers in the next release? preferable sio. thank you for your hard work !!
Nice might try this maybe add cpu/gpu overclocking? nice to see 901f kernels.
Sent from my SM-G901F using Tapatalk
XPERIAAplooper said:
hey great work on this kernel !!! if possible could you add more io schedulers in the next release? preferable sio. thank you for your hard work !!
Click to expand...
Click to collapse
cloudx720 said:
Nice might try this maybe add cpu/gpu overclocking? nice to see 901f kernels.
Sent from my SM-G901F using Tapatalk
Click to expand...
Click to collapse
Hi
I take in consideration your demands . However I still don't know when I'll release next version as my week of exams begins tomorrow. Stay tuned
Would it be possible for anybody to post stock kernel zip for Reflash in case I want to go back to it?
Sent from my SM-G901F using XDA-Developers mobile app
spezl said:
Would it be possible for anybody to post stock kernel zip for Reflash in case I want to go back to it?
Sent from my SM-G901F using XDA-Developers mobile app
Click to expand...
Click to collapse
Hi, I'd advise you to use TWRP and backup your boot partition. If you need to get back to stock kernel, just restore
But if you really need a flashable stock kernel zip, I'll make one
licha26 said:
Hi
I take into consideration your demands . However I still don't know when I'll release next version as my week of exams begins tomorrow. Stay tuned
Click to expand...
Click to collapse
hehe thanks. good luck for your exams
licha26 said:
Hi
I take into consideration your demands . However I still don't know when I'll release next version as my week of exams begins tomorrow. Stay tuned
Click to expand...
Click to collapse
Good luck, CRACK!!!
[emoji310][emoji310]
Good luck man.
Waiting for a flashable stock kernel
sent from my Nokia 3210 using xda-Developers mobile app
@Android2003
use this one :
http://uploadboy.me/1dz4xttx86vc/Stock.zip.html
I'm currently testing V2! Expect a release soon
V2 is online, find the links in OP : what's new ?
- hotplugs are back
- underclock (268) / overclock (2880)
- added kcal support for screen tweaks
- prevent some kernel wakelocks
- new io schedulers
- fastcharge
I'll publish my kernel adiutor profile soon, I still need to make some optimizations but I must say that it is very promising ! (around 45 min for 10% consumption when screen is on on wifi)
Francais, et en plus de ca Lyonnais ! GG Frero.
Wait for your kernel profile , so good for 45 minutes. Thanks Man !
Testing v2.
Thanks CRACK!!!
licha26 said:
V2 is online, find the links in OP : what's new ?
- hotplugs are back
- underclock (268) / overclock (2880)
- added kcal support for screen tweaks
- prevent some kernel wakelocks
- new io schedulers
- fastcharge
I'll publish my kernel adiutor profile soon, I still need to make some optimizations but I must say that it is very promising ! (around 45 min for 10% consumption when screen is on on wifi)
Click to expand...
Click to collapse
In OP u say, use kernel adiutor mod.
This version of the app is very buggy for me.
Stock app is working good.
Anyone with the same problem?
sent from my Nokia 3210 using xda-Developers mobile app
Delete
I get bootloop when I flash this kernel..
Runs great with zzmove batteryplus, OC 2880/UC 268, UV-10, cfq with 512kb int./1024kb ext. read ahead and msm adreno tz with idler enabled and tuned to be less aggressive.
Testing SOT now...
Thanks a lot @licha26!
...btw: anybody able to enable simple_ondemand governor for GPU without sudden reboot?
Sent from my SM-G901F using XDA-Developers mobile app
In all day I dont had any issue, reboot, etc...
The battery life is very good.
Great work!!!
[emoji106][emoji106]
WarningI will not be responsible for anything that happens to your Redmi 2 after flashing this kernel. If you don't know how to unbrick your phone please don't make any modifications and stay with stock MIUI.
What is HexaTurbo?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HexaTurbo kernel is meant to be the best gaming kernel with awesome Zetsubou features added on top of CAF/CM kernel. Kernel source will always be kept in sync with new caf(LA.BR.1.2.9_rbx.xx) and mainstream linux(3.10.y) updates. For now the kernel dosn't include features like Undervolt and other features.
Zetsubou
This kernel is 100% based on Zetsubou kernel, that is the best performance/stability balance for redmi 2! So all new Zetsubou features will be added and optimized much as possible to deliver the best performance for Root and Non-Root users, what? non-root users? yes! this kernel was made to be used without root! so you can get the max performance in your games without using Kernel adiutor or EX kernel manager!! (cof... cof.... Pokemon GO)
Features:
NEON optimization
linux version 3.10.105
compiled with UBER GCC 4.9
GPU TurboClock support upto 620MHz
based on caf branch LA.BR.1.2.9_rbx.xx
General optimizations
True 1.2ghz clock
wake gestures: doubletap2wake, sweep2wake (up,down,left,right)
sound control for root users (not tested)
sweep2sleep support!
I/O schedulers: sio, deadline, fiops, noop, bfq, cfq, fifo, sioplus, vr, tripndroid and zen
governors: interactive, ondemand, conservative, performance, chill, relaxed, impulse, bioshock and despair
hotplug: lazyplug
KCAL advanced color control
adreno idler
DriveDroid support
advanced TCP congestion algorithms
force fast charge support
disabled crc check
FS: exfat, NTFS & sdcardfs support
f2fs updated upto v4.10-rc1-3.10
frandom support
reduced load average
fsync on/off support
Check my and Ahish source for other features
-- Download Now --
-- 2017 NewGen Logo Download --
Use EX KERNEL MANAGER or KERNEL ADIUTOR to control all features
Installation:
-Download the zip file and save it into the root directory of external storage
-Reboot to recovery mode and flash the zip file
-Reboot device
It's recommended to flash HexaTurbo only over stock kernel
I recomend using Custom installation for better choices, since you are a gamer!
Kernel will boot with max CPU/GPU frequencies that you select, ex: 1.21GHz/620MHz
Credits:
-ketut.kumajaya hats off to this man for all the work he did for Redmi 2
-osm0sis for his amazing AnyKernel script
-flar2 for his awesome features
-Ashish94 for helping me in almost everything!
-iamsubhranil for also helping me out!
XDA:DevDB Information
[Kernel][N-M][UBER-GCC][NewGen] HexaTurbo 2017, Kernel for the Xiaomi Redmi 2
Contributors
TecnoTailsPlays, Ashish94, iamsubhranil, All devs from kernel guides and mods
Source Code: https://github.com/TecnoAquaPlays/android_kernel_wingtech_HexaTurbo/tree/master
Kernel Special Features: This kernel is optimized for gaming, make your redmi 2 better and cooler!
Version Information
Status: Stable
Current Stable Version: 20170312
Stable Release Date: 2017-03-13
Created 2017-02-09
Last Updated 2017-03-24
Changelog 20170313 NewGen
-Fix random reboots on 2014819
-Stock CPU clock 1.21ghz (1.8ghz or 2.1ghz are fake overclock)
-Add KSM
-Sync Zetsubou sources
-Add F2FS & SDCARDFS support <---| Check Zetsubou thread for how to format to thease file system's
-LineageOS source
-Many other optimizations
Changelog 20170212 Equalizer
-Remove Fake CPU clocks
-Remove fake overclock to 2.11ghz and go back to "Supported 1.3ghz"
-Optimized aroma installer
-Minor things
GPU overclock is Real, and all clocks too, so I din't change anything for now
Changelog 20170210-something
-Totally new freequency table for GPU/CPU, you will get way smoother UI and games
-Minor fixes
Changelog 20170210-Fix
-Switch back to UBER gcc 4.9 becouse some issues with CPU
-Optimize aroma installer a little bit
-Testing new CPU overclock code
-Other minor stuff
Changelog 20170210
-Switch to UBER gcc 6.0
-Enable -O3 optimization
Changelog 20170209:
-Initial build
Can I flash with custom rom like AOSP?
Can i flash it on Validus?
Sent from my 2014813 using Tapatalk
Yousef Algadri said:
Can i flash it on Validus?
Sent from my 2014813 using Tapatalk
Click to expand...
Click to collapse
Sure, if it din't work, sent me dmesg and logcat
zmanz79 said:
Can I flash with custom rom like AOSP?
Click to expand...
Click to collapse
I'm not sure, since this kernel is for cm based roms, you can give it a try....
Good job, my Redmi 2 is fast. Amazing! I'm using mokee 7.1 nitghly 20170207
no sim cards detected after flashing the kernel but on dirty flashing the rom it gets detected.the rom is RR N latest .
Yeah techno is doing awesome work
AOSPExtended..
Custom installation not work for CPU and Color Control. I have to manually adjust all the setting on each reboot. Especially for CPU control, it need time to get 2112 , it keep lock down to 800 on each reboot. Anyway good performance .
bro 2.11 ghz for cpu...... wtf... cool man... installing it right away
Could you add another Hotplug? AutoSMP would be nice
taalojarvi said:
Could you add another Hotplug? AutoSMP would be nice
Click to expand...
Click to collapse
I will try
New build is out!
-Switch to UBER GCC 6.0
-Enable -O3 optimization
New features will be added in future builds, becouse I need time to test other -unstable- features
DOWNLOAD
TecnoTailsPlays said:
New build is out!
-Switch to UBER GCC 6.0
-Enable -O3 optimization
New features will be added in future builds, becouse I need time to test other -unstable- features
DOWNLOAD
Click to expand...
Click to collapse
Work in AOSP EX ?
andreymixmax said:
Work in AOSP EX ?
Click to expand...
Click to collapse
Look, I only use LineageOS, so I can't test in others roms, you will have to try by yourself
LOL, if someone is using the kernel, please open CPU-Z and kernel adiutor and sent me a screenshot of the freequencyes, I think the UBER 6.0 glitched the kernel
New build online!!
-Fix weird stuff on CPU-Z and other apps
-Switch back to UBER gcc 4.9 becouse CPU problems
-Edit aroma installer picture time
-Optimize CPU overclock code (Report if you had random reboots only with this kernel in LineageOS)
--DOWNLOAD--
@TecnoTailsPlays
Whilst testing your new update, I realized that the UI was really laggy. So I checked my frequencies and governor via KA and found out that the max frequency was capped at 800 mhz.
I tried changing frequencies and the frequencies wouldn't stick. If I tried raising it to 1209, it would bounce back to 800.
I tried changing governors too. Unfortunately issue didn't have a workaround so I Reverted to Zetsubou
My modem is 2014818 and I have the 1Gb Variant. I run AiCP 12.1
taalojarvi said:
@TecnoTailsPlays
Whilst testing your new update, I realized that the UI was really laggy. So I checked my frequencies and governor via KA and found out that the max frequency was capped at 800 mhz.
I tried changing frequencies and the frequencies wouldn't stick. If I tried raising it to 1209, it would bounce back to 800.
I tried changing governors too. Unfortunately issue didn't have a workaround so I Reverted to Zetsubou
My modem is 2014818 and I have the 1Gb Variant. I run AiCP 12.1
Click to expand...
Click to collapse
Did you try the latest build? this was fixed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dragon-Elite Kernel for Lenovo Vibe K5/K5 Plus
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Insecured
adb runnable as root
init.d support
Upgraded to latest Linux version 3.10.108
Built Using Linaro- 4.9 Aarch64 Toolchain along with optimizations like GCC optimization for cortex-a53 ,O3 & Graphite flags.
Dynamic Fsync - A driver originally written by faux123- Disables Fsync when phone is being used causing significant IO boost.
Added Adreno idler GPU Alogrithm - An efficient workaround for msm-adreno-tz's overheads. Developed by @arter97
Disabled Gentle fair sleepers
F2FS Support ( Import from Motorola Source 7.0 Nougat )
Enabled arch power
Automatic busybox installation
Compatible with systemless root
KSM ( Kernel Sample Merging ) enabled
Uses live Ramdisk patching during flashing, so need not worry about ROMs on which you are flashing on.
[*]Added Double Tap to Wake and Sweep2Wake
Added sound control
Added simple GPU Algorithm - An add-on for MSM-Adreno TZ GPU Governor. Developed by @faux123.
KCAL advanced color control [V2](RGB, Saturation, Value, Contrast, Hue)
CIFS support
[*]zSwap support - A Virtual compressed memory pool - Can be used as a swapping devices for extra RAM.
Reduced idle power consumption
Wakelocks blocked by default thanks to @franciscofranco
Vibration Intensity Control: Let’s you adjust the intensity at which your phone vibrates
IOScheduler
block: Added Sio IOScheduler
block: Added FIOPS IOScheduler
block: Added Maple IOScheduler
block: Added Zen IOScheduler
Additional IOSchedulers: BFQ v7r8(recommended)
Governors enabled: ondemand, interactive,chill,relaxed,impulse,blu_active:
Add sysinterface for GENTLE_FAIR_SLEEPERS [toggle switch]
[*]Frandom driver- Fast Kernel Number Generator.
Kexec Hardboot Supported
Performance enhancements
[*]Added USB fast charge
[*]Introducing Intelli_thermal - A new thermal protection mechanism
Support for CRC-Toggle (Disabled by Default in Misc. TAB).
Improved square root algorithm.
Disabled some debugging
[*]Relax thermal throttling values
Disabled MMC CRC check for extra 30% boost in IO
Support for ARCH_Power to reduce Power-Consumption and increase Battery-Life.
Support for the new PowerSuspend algorithm.
Optimized Console FrameBuffer for upto 70% increase in Performance.
Support for Larch Power feature (should improve Battery-Life).
Powersuspend mode
[*]Added bunches of TCP Congestion Algorithm
Dragon-Elite_V1.2_N_Inline
Dragon-Elite-V1.1_N_Module
Dragon-Elite_V1.2_Oreo-8.1
V1.1 Changes :-
1 :- New i/o maple.
2 :- Wireguard added.
3 :- Compiled with custom Linaro's Snapshot GCC with hg-binutils-2.26.51.0.2 you can grab KERNEL_GOD build here
4 :- Lots Of tunings
5 :- i DONT REMEMBER NOW.Check my Git
V1.2 Changes :-
[*] Rebase both Nougat and Oreo to new source by harry8242
[*] It's new so less features still i added few of them from old vegito source.
[*]Compiled with custom Linaro's GCC -4.9.
[*]CPU voltage reduced for less heating.
[*]I/O scheduler maple,zen,fiops,zen added
[*]CPU governors impulser,chill,relaxed,blu_active added.
JOIN OUR COMMUNITIES
Important:
Do not flash this over other custom kernels!
You should only flash Dragon_Elite over the kernel that came with your ROM
Reporting bugs
Grab a logcat, and a console ramoops (if random rebooting) or a dmesg (any other issues) right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
See how to submit a bug report for the appropriate place to report your bug
INSTRUCTIONS
Just flash the zip in twrp and you are good to go!
XDA:DevDB Information
Dragon-Elite, Kernel for the Lenovo Vibe K5 Plus
Contributors
yankit293, Dreamstar, harry8242, dev_harsh1998
Source Code: https://github.com/yankit293/android_kernel_lenovo_msm8916
Kernel Special Features:
Version Information
Status: Testing
Current Stable Version: none
Current Beta Version: 1.0
Beta Release Date: 2017-12-27
Created 2017-12-27
Last Updated 2018-01-04
Is this compatible with oreo roms? Thanks btw.
lacsinasonny said:
Is this compatible with oreo roms? Thanks btw.
Click to expand...
Click to collapse
yes for oreo only
yankit293 said:
yes for oreo only
Click to expand...
Click to collapse
Thanks!
There are two threads for this kernel, what is the difference? Thanks!
Amazing dude, congrats for your work!
:
Keep it up!
Keep it up bro...
As I got Audio bugs with Omni oreo which can be fixed via enabling mono audio. (You can add this in OP too). Also double tap to wake not working. And add oreo compatibility in OP too.
Otherwise it's a nice kernel I'm using it from 2 weeks.
Thanks Ankit for keeping this kernel alive for oreo ROMs.
Hotspot not working
I am using official lineage os 14 nd hotspot is not working but totally love the performance
Is it compatible with Android 8.1 or 8.0?
Yairr Jiménez said:
Is it compatible with Android 8.1 or 8.0?
Click to expand...
Click to collapse
Yes it is
I noticed that the little core doesn't use the other frequencies much. It's always at 200mhz and deep sleep. Unlike the big core which maximizes the other frequencies.
new build for viper
change log..
1. dt2w enable using KA app.
2. inline wifi so you can flash dragon elite kernel future updates
https://www.androidfilehost.com/?fid=962157660013069099
press thank button if you like my work...
Samiranboruah said:
I am using official lineage os 14 nd hotspot is not working but totally love the performance
Click to expand...
Click to collapse
new build coming with wifi module join telegram group for BETA builds
New update available for old Rom users as well as new Rom users ..
Inline for new roms
module for old roms which have wlan.ko wifi module ..
happy flashing....
Phone reboots when locked if adopted storage is used. Probably a bug due to iosched switcher module.
dt2wake up not working
yankit293 said:
New update available for old Rom users as well as new Rom users ..
Inline for new roms
module for old roms which have wlan.ko wifi module ..
happy flashing....
Click to expand...
Click to collapse
dt2wakeup not working.., via ka app not working too, kernel there is no menu of wakup on
everything works as expected but dtw is missing from KA and when using adopted storage the phone constantly reboots when locked.
Rom: Viper OS Jan 1 build
kernel version: 1.1
Denil_Chungath said:
everything works as expected but dtw is missing from KA and when using adopted storage the phone constantly reboots when locked.
Rom: Viper OS Jan 1 build
kernel version: 1.1
Click to expand...
Click to collapse
switch to stock kernel will be fixed in next update .. soon