{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dragon-Elite Kernel for Lenovo Vibe K5/K5 Plus
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Insecured
adb runnable as root
init.d support
Upgraded to latest Linux version 3.10.108
Built Using Linaro- 4.9 Aarch64 Toolchain along with optimizations like GCC optimization for cortex-a53 ,O3 & Graphite flags.
Dynamic Fsync - A driver originally written by faux123- Disables Fsync when phone is being used causing significant IO boost.
Added Adreno idler GPU Alogrithm - An efficient workaround for msm-adreno-tz's overheads. Developed by @arter97
Disabled Gentle fair sleepers
F2FS Support ( Import from Motorola Source 7.0 Nougat )
Enabled arch power
Automatic busybox installation
Compatible with systemless root
KSM ( Kernel Sample Merging ) enabled
Uses live Ramdisk patching during flashing, so need not worry about ROMs on which you are flashing on.
[*]Added Double Tap to Wake and Sweep2Wake
Added sound control
Added simple GPU Algorithm - An add-on for MSM-Adreno TZ GPU Governor. Developed by @faux123.
KCAL advanced color control [V2](RGB, Saturation, Value, Contrast, Hue)
CIFS support
[*]zSwap support - A Virtual compressed memory pool - Can be used as a swapping devices for extra RAM.
Reduced idle power consumption
Wakelocks blocked by default thanks to @franciscofranco
Vibration Intensity Control: Let’s you adjust the intensity at which your phone vibrates
IOScheduler
block: Added Sio IOScheduler
block: Added FIOPS IOScheduler
block: Added Maple IOScheduler
block: Added Zen IOScheduler
Additional IOSchedulers: BFQ v7r8(recommended)
Governors enabled: ondemand, interactive,chill,relaxed,impulse,blu_active:
Add sysinterface for GENTLE_FAIR_SLEEPERS [toggle switch]
[*]Frandom driver- Fast Kernel Number Generator.
Kexec Hardboot Supported
Performance enhancements
[*]Added USB fast charge
[*]Introducing Intelli_thermal - A new thermal protection mechanism
Support for CRC-Toggle (Disabled by Default in Misc. TAB).
Improved square root algorithm.
Disabled some debugging
[*]Relax thermal throttling values
Disabled MMC CRC check for extra 30% boost in IO
Support for ARCH_Power to reduce Power-Consumption and increase Battery-Life.
Support for the new PowerSuspend algorithm.
Optimized Console FrameBuffer for upto 70% increase in Performance.
Support for Larch Power feature (should improve Battery-Life).
Powersuspend mode
[*]Added bunches of TCP Congestion Algorithm
Dragon-Elite_V1.2_N_Inline
Dragon-Elite-V1.1_N_Module
Dragon-Elite_V1.2_Oreo-8.1
V1.1 Changes :-
1 :- New i/o maple.
2 :- Wireguard added.
3 :- Compiled with custom Linaro's Snapshot GCC with hg-binutils-2.26.51.0.2 you can grab KERNEL_GOD build here
4 :- Lots Of tunings
5 :- i DONT REMEMBER NOW.Check my Git
V1.2 Changes :-
[*] Rebase both Nougat and Oreo to new source by harry8242
[*] It's new so less features still i added few of them from old vegito source.
[*]Compiled with custom Linaro's GCC -4.9.
[*]CPU voltage reduced for less heating.
[*]I/O scheduler maple,zen,fiops,zen added
[*]CPU governors impulser,chill,relaxed,blu_active added.
JOIN OUR COMMUNITIES
Important:
Do not flash this over other custom kernels!
You should only flash Dragon_Elite over the kernel that came with your ROM
Reporting bugs
Grab a logcat, and a console ramoops (if random rebooting) or a dmesg (any other issues) right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
See how to submit a bug report for the appropriate place to report your bug
INSTRUCTIONS
Just flash the zip in twrp and you are good to go!
XDA:DevDB Information
Dragon-Elite, Kernel for the Lenovo Vibe K5 Plus
Contributors
yankit293, Dreamstar, harry8242, dev_harsh1998
Source Code: https://github.com/yankit293/android_kernel_lenovo_msm8916
Kernel Special Features:
Version Information
Status: Testing
Current Stable Version: none
Current Beta Version: 1.0
Beta Release Date: 2017-12-27
Created 2017-12-27
Last Updated 2018-01-04
Is this compatible with oreo roms? Thanks btw.
lacsinasonny said:
Is this compatible with oreo roms? Thanks btw.
Click to expand...
Click to collapse
yes for oreo only
yankit293 said:
yes for oreo only
Click to expand...
Click to collapse
Thanks!
There are two threads for this kernel, what is the difference? Thanks!
Amazing dude, congrats for your work!
:
Keep it up!
Keep it up bro...
As I got Audio bugs with Omni oreo which can be fixed via enabling mono audio. (You can add this in OP too). Also double tap to wake not working. And add oreo compatibility in OP too.
Otherwise it's a nice kernel I'm using it from 2 weeks.
Thanks Ankit for keeping this kernel alive for oreo ROMs.
Hotspot not working
I am using official lineage os 14 nd hotspot is not working but totally love the performance
Is it compatible with Android 8.1 or 8.0?
Yairr Jiménez said:
Is it compatible with Android 8.1 or 8.0?
Click to expand...
Click to collapse
Yes it is
I noticed that the little core doesn't use the other frequencies much. It's always at 200mhz and deep sleep. Unlike the big core which maximizes the other frequencies.
new build for viper
change log..
1. dt2w enable using KA app.
2. inline wifi so you can flash dragon elite kernel future updates
https://www.androidfilehost.com/?fid=962157660013069099
press thank button if you like my work...
Samiranboruah said:
I am using official lineage os 14 nd hotspot is not working but totally love the performance
Click to expand...
Click to collapse
new build coming with wifi module join telegram group for BETA builds
New update available for old Rom users as well as new Rom users ..
Inline for new roms
module for old roms which have wlan.ko wifi module ..
happy flashing....
Phone reboots when locked if adopted storage is used. Probably a bug due to iosched switcher module.
dt2wake up not working
yankit293 said:
New update available for old Rom users as well as new Rom users ..
Inline for new roms
module for old roms which have wlan.ko wifi module ..
happy flashing....
Click to expand...
Click to collapse
dt2wakeup not working.., via ka app not working too, kernel there is no menu of wakup on
everything works as expected but dtw is missing from KA and when using adopted storage the phone constantly reboots when locked.
Rom: Viper OS Jan 1 build
kernel version: 1.1
Denil_Chungath said:
everything works as expected but dtw is missing from KA and when using adopted storage the phone constantly reboots when locked.
Rom: Viper OS Jan 1 build
kernel version: 1.1
Click to expand...
Click to collapse
switch to stock kernel will be fixed in next update .. soon
Related
Fude Kernel v1.5.1
(3.0.101)Features:
Compatible with stock 4.1.2 or any rom based in stock jellybean.
Updated to 3.0.101
Native exFat support (Driver from Samsung OSRC).
Support for BLN (Backlight Notifications - Ready to use BLN Control).
Now Backlight Notification doesn't need BLN Control app, and now is configurable through /sys/module/bln/parameters
Compiled with Linaro Toolchain 4.9 optimized for Cortex-A9!
Sysctl tweaks.
Multi-core scheduler support.
SWAP support.
zRAM support.
Disabled Samsung DFVS.
Init.d support (needs busybox)
Added IO schedulers:
ROW
SIO
SIOPLUS (I/O Scheduler by default)
VR
ZEN
Added governors:
Abyssplug (as default cpu governor)
HotPlugX
LulzactiveQ
Sakuractive
Smartassv2
[*] CPU OC: up to 1.2 GHz (This feature isn't 100% my work, I used commits from CroPol kernel sources)
OC, in my device (8190L) it's very unstable, with 1N4148 kernel and CroPol kernel, so, with this kernel, too. I have tested it alot of time and sometimes I had some random reboots. Anyway, it makes a noticeable performance plus.
Please guys, test it and report if it is stable on your device.
Installation
Download zip, copy it into /sdcard and flash it through recovery (CWM, PhilZ, TWRP)
Downloads
GT-I8190/L/N
Fude-1.5.1_GT-8190X_signed.zip
For more info and extras, check download section at the top of the post:
http://forum.xda-developers.com/devdb/project/?id=5637#downloads
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to...
overclock the CPU?
If you want to overclock your device, simply apply 1.2 GHz as max frequency with SetCPU or something like.
OC, in my device (8190L) it's very unstable, with 1N4148 kernel and CroPol kernel, so, with this kernel, too. I have tested it alot of time and sometimes I had some random reboots. Anyway, it makes a noticeable performance plus.
Please guys, test it and report if it is stable on your device.
activate zRAM?
If you want to activate zRAM, a ZIP (beta) is available in downloads.
It will create a 64mb compressed block device. Needs busybox and init.d support
A log can be found in /data/zram.log
Please, don't use this if you really don't need it or you don't know about the advantages and disadvantages.
activate SWAP?
If you want to activate SWAP, a ZIP (beta) is available in downloads.
It will create a 128mb file for swap in /cache partition. Needs busybox and init.d support
A log can be found in /data/swap.log
Please, don't use this if you really don't need it or you don't know about the advantages and disadvantages.
configure BLN?
If you want to configure BLN, all they parameters are available at /sys/module/bln.
These parameters are:
BLN_ENABLED can be Y or N, and enables/disables BLN.
BLN_BLINK_MODE can be 0, 1 or 2.
With 0, the leds will turn on and stay on while BLN_STATIC_TIME indicates (in seconds).
With 1, the leds will flash with pauses of BLN_BLINK_TIME (in seconds).
With 2, the leds will flash two times with pauses of BLN_BLINK_TIME (in seconds).
BLN_BLINKING_TIME indicates the time (in seconds) while leds will flash (only in modes 1 or 2). After this time, leds will turn off.
To set this parameters, you can use Terminal Emulator and use command echo, or, if you want to do this permanently, you have to make an init.d script.
Changelog:
Code:
[/SIZE]
1.5.1 [2015/02/10]:
* Add 1100Mhz to frequency table.
* Fix screen rotation artifacts.
1.5 [2015/01/20]:
* Added CPU OC support.
* Reimplement BLN to work without BLN Control.
* Change KSM to UKSM.
1.4.1 [2014/08/27]:
* Fixed bluetooth.
* Added zRam support.
1.4 [2014/08/11]:
* Rebuilded from clean sources (yes, again, rebuilded from the new samsung kernel sources)
* Applied all patches from 3.0.31 to 3.0.101
* Now, I added only the best governors and io schedulers
* Updated exFat implementation
* Disabled Samsung DFVS
* Update toolchains
* Add init.d support
1.3:
* Rebuilded from clean sources.
* Removed LagFree and Hotplug governors.
* Added InteractiveX, OndemandX, Lionheart and Sakuractive governors.
* Multi-Core scheduler support.
* New exfat implementation.
* Sysctl tweaks.
* Fix 1ghz bug (I hope)
1.2:
* Added Lazy, LagFree and OndemandQ governors.
* Added ROW and ZEN I/O schedulers.
1.1:
* Fixed About -> Phone -> Kernel version
* Added MinMax and LulzactiveQ governors
* Ondemand + SIO are default governor and IO scheduler
* Added support for swap
1:
* Initial release
Thanks for their patches to:
@cocafe
@Android-Andi
@yanpol199
@ChronoMonochrome
And everyone who has developed for this phone!
XDA:DevDB Information
Fude, Kernel for the Samsung Galaxy S III Mini
Contributors
LuuchoRocha
Source Code: https://github.com/LuuchoRocha/fude_kernel_s3mini
Kernel Special Features: zRAM, SWAP, Disabled DVFS, CPU OC
Version Information
Status: Beta
Current Stable Version: 1.4.1
Stable Release Date: 2014-08-29
Current Beta Version: 1.5.1
Beta Release Date: 2015-02-10
Created 2014-09-01
Last Updated 2015-02-10
dl-link?
Download link???
@moonryder, @Berkant Ayhan Karabudak
The threads starting with xda:devdb have a "Downloads" section in top.
Check this image:
View attachment 2920861
However, here is the link
LuuchoRocha said:
@moonryder, @Berkant Ayhan Karabudak
The threads starting with xda:devdb have a "Downloads" section in top.
Check this image:
View attachment 2920861
However, here is the link
Click to expand...
Click to collapse
I have never seen there. Thank you.
great kernel.
No updates?
albertusac said:
No updates?
Click to expand...
Click to collapse
Yes! I'm working (slowly) on it. I'll try to release a new version before christmas
i still got stock rom to run. lol.
core7x said:
i still got stock rom to run. lol.
Click to expand...
Click to collapse
It's a promise, the next release will be compatible with 4.4.x roms
LuuchoRocha said:
It's a promise, the next release will be compatible with 4.4.x roms
Click to expand...
Click to collapse
Will you add oc too??
Would be realy nice
galaxy mini said:
Will you add oc too??
Would be realy nice
Click to expand...
Click to collapse
Maybe in next releases, but I tried it in my phone and it's very unstable (I think my 8190L = low quality)
Maybe I can manage two branches, with OC and without it... :fingers-crossed:
nice one. stock kernel missing a lot of kernel fun compare new 4.4 rom.
Hey guys C: how can I dissable zRam? I flashed the zRam zip, but now I want to disable it
Thanks
core7x said:
nice one. stock kernel missing a lot of kernel fun compare new 4.4 rom.
Click to expand...
Click to collapse
Yes
But i'm working on various changes on BLN (now can configure some parameters) and won't be neccesary to use BLN Control and will try to add OC if I can run it stable on my device
Dnxss said:
Hey guys C: how can I dissable zRam? I flashed the zRam zip, but now I want to disable it
Thanks
Click to expand...
Click to collapse
With a root browser, go to /system/etc/init.d/ and delete the file named "01zram"
Then reboot and zRam will be disabled again
LuuchoRocha said:
Yes
But i'm working on various changes on BLN (now can configure some parameters) and won't be neccesary to use BLN Control and will try to add OC if I can run it stable on my device
With a root browser, go to /system/etc/init.d/ and delete the file named "01zram"
Then reboot and zRam will be disabled again
Click to expand...
Click to collapse
Thank you @LuuchoRocha OC should be a great feature for stock roms
Friend, thank you for this great kernel. It runs beautifully. Great work!!!
Don't worry be happy!
It works so great! I think it's great if zzMoove governor is added. It saves a lot of battery
Sent from my GT-I8190 using Tapatalk
Will the S3 Mini run faster installing this kernel? Will save more battery? And there is also a little configuration utility to change settings?
fabiocaruso said:
Will the S3 Mini run faster installing this kernel? Will save more battery? And there is also a little configuration utility to change settings?
Click to expand...
Click to collapse
No, you just able to change cpu freq, governor, IO schedulers, KSM, LMK and VM ae usual.
Sent from my GT-I8190 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
#Be_Xeonotic_with_YU
Disclaimer
Code:
#include
/*
* Your warranty is now void.Nah! Just kidding No warranty is void in YU GOD. :)
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features
Common
Compiled with SaberMod 6.0 and Uber 5.0.2
Compiled with latest source
CPU Cluster-1 Overclocked to 2Ghz
Touch Boost
Optimizations
LZ4 Compression Level
Fix high load average from uninterruptible waits
Cortex A53/ARMv8 architecture Tune-Up
Enabled ARCH_POWER
Universal ROM support (x64 bit Roms)
Thunder charge 2.1
KCAL
Dynamic Fsync
TCP Congestion Algorithms
Undervolted
Cortex A53 Optimization Enhanced.
Wake Lock
Page Mapping
and many many more
Governors
intellidemand
smartmax
impulse
Alucard
zzmove
elementalX
yankactive
darkness
internactive
ondemand
userspace
powersave
performance
Hotplugs
IntelliPlug
MSM Hotplug
Alucard
Zen Decision
Auto SMP
Installations Steps:-
Minimum Requirements to Install XeonKernel
This is For ARM 64
Your Device Should be Rooted with Unlocked Boot-loader & Latest Custom recovery Installed.
Recommended Custom Recovery TWRP
1. Boot into TWRP
2. Wipe cache and dalvik
3. Flash Xeon-kernel for Yureka/Yureka+
4. Again Wipe cache and dalvik
5. Reboot to System
Recommended Settings
App:- Kernel Adiutor
Check here :- http://m.imgur.com/a/FJYLH
Alucard isn't avaible in Android 6.0 or CM13 build
Alternative for Alucard you can use MP Decision and Darkness/SmartMax governor.
ChangeLog
r6.5
Added Android M support
Added back all CPU governors
Removed Intelli-thermal (really a bad idea to add it)
Removed Gentle sleeper (Why to keep it when no use?)
Added back cpu booster and hotplug
Reduced the default charge current
Enabled Charge current rate by defualt
And Of course various tweaks from my side for power saving and performance!
Rest changes are same of r6 and new r6
r5
( Common )
> Enabled Pipe Flag
> Add interruptible wait to reduce system load average in msm
> Add Interactive Governor tweaks
> Partial OC till 1.7Ghz ( All revs may not receive OC )
> O3 Optimization with additional flags
> Add Mako Hotplug
> Add new Audio drivers
> Bye Bye Debugs :v
Now Interesting part
( Not seen in other kernels before )
> New Load Freq avoids moire ( 4*HZ + 61 )
> Low memory kill added for_each_thread insteadof while_each_thread
> Implement Fast Idling of CPU when System is partial
> Add Interruptible Thread to Mdss dsi host
> MPM Disabled Debugging
> Interactive Governor added Euclidean CPU relation
> Add new -go, -fvopts,-fno-inline function optimization
> Add Time keeping move clock sync work to power efficient work queue ( For better use of CPU idle time )
> Enabled Conservative governor.
r4
Final Fix for revs issue
Fix random reboot issue
Fix high load due to drivers
Fix Intellidemand wake up issue
Fix Not waking up issue
Enhance Cortex A53 Optimizations
Add Alucard governor
Add Alucard Hotplug
Add All 8 core active while booting for fastest boot
Add Paging table mapping
Compiled with Ofast flag
r3:-
Fixed revs issue
Fixed Bootloop issue
Fixed High temp while charging
Removed 2.0Ghz (Unstable), Does 0.3Ghz really matters ?
New Features (Never seen before in any other kernel for tomato/+)
Frequency lower step down till 100Mhz.
Cortex A53 Optimizations.
r2:-
New LOGO Art.
Decreased default value of thundercharge to 1.3A
Updated SbaerMod toolchain to 6.0
Added One more core while booting to make boot faster.
Added Inbuilt Recommmended settings ( To apply settings just open Kernel Adiutor > settings > tap on test )
Fixed Yankactive
Fixed Input
Fixed Ipv4
kmem Leak ignore fixed
r1:- Intial release
Downloads
For all 5.1/6.0 Roms
Xeon_r6.5_tomato_UBTC.zip : https://www.androidfilehost.com/?fid=24399994186367403
Source
https://github.com/SomeshThakur/Xeon-Kernel
Credits
Varun chitre
Audio God
Faux123
Myfluxi
Special Thanks to Hriday Sharma and Sanyam Jain for intial setting up everything. I would have never release a kernel without them
Continue reading...
XDA:DevDB Information
Xeon.kernel, Kernel for the YU Yureka
Contributors
someshthakur
Kernel Special Features: Stable, Battery+Performance,No bull**it
Version Information
Status: Stable
Current Stable Version: r5
Created 2015-11-17
Last Updated 2015-12-24
Facebook Community Page :- https://www.facebook.com/XeonKernel/
Like to support Ask any query.
Note
Bench-marking:-
Don't believe benchmark scores because they always change time to time. But sometimes they matter lil bit
Performance Drops:-
The recommended settings are setup for both battery+multitasking. If you face any lag or drops then try you custom settings!
Less Battery backup:-
Use Greenify, try Uber build
Camera Fix :- https://yadi.sk/d/GnHae4LTjer7H
Only for Old source based ROMs and Ported ROMs
BroTHer Is THis SuPported in this Rom Link BElow.. plzzz See AnD Tell..
(http://forums.yuplaygod.com/threads/rom-tomato-unofficial-euphoria-os-1-1-5-1-1.11940/)
adiroy1616 said:
BroTHer Is THis SuPported in this Rom Link BElow.. plzzz See AnD Tell..
(http://forums.yuplaygod.com/threads/rom-tomato-unofficial-euphoria-os-1-1-5-1-1.11940/)
Click to expand...
Click to collapse
Yeah! of course
someshthakur said:
Yeah! of course
Click to expand...
Click to collapse
BrotHer HavE u Seen THe link THat I HavE atAched..??plzzz See iT tHen TEll.. coz IT was OLder EuPHoriA Rom.. nOt NEw oNe..!!
Miui 7 global build supported?
is it support miui v7 china build
WOW..!
Simply put .. the best kernel ever.!
Battery backup is very good and so is the performance n stability
Thanks a ton Somesh
is it support miui v7 china build
Will it work on stock cm12????
Sent from my Nexus 4 using XDA Free mobile app
adamnp2000 said:
is it support miui v7 china build
Click to expand...
Click to collapse
Yes! You need to flash camera fix may be...
gtsfreak said:
Will it work on stock cm12????
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Yes! You need to flash camera fix.
u_knw_who said:
Miui 7 global build supported?
Click to expand...
Click to collapse
Yes! You need flash camera fix because its based on old tree.
adiroy1616 said:
BrotHer HavE u Seen THe link THat I HavE atAched..??plzzz See iT tHen TEll.. coz IT was OLder EuPHoriA Rom.. nOt NEw oNe..!!
Click to expand...
Click to collapse
Check if everything works fine. Camera may be not working that you need to flash fix
Xeon™ r2ChangeLog
New LOGO Art.
Decreased default value of thundercharge to 1.3A
Updated SaberMod toolchain to 6.0
Added One more core while booting to make boot faster.
Added Inbuilt Recommmended settings ( To apply settings just open Kernel Adiutor > settings > tap on test )
Fixed Yankactive
Fixed Input
Fixed Ipv4
kmem Leak ignore fixed
Download
which is the best for miui saber mod or uber.can you please give me camera fix link of miui
adamnp2000 said:
which is the best for miui saber mod or uber.can you please give me camera fix link of miui
Click to expand...
Click to collapse
Try SaberMod for performance and Uber for battery life.
Here is the Camera fix for all roms based on old device tree.
Link:- https://docviewer.yandex.com/?url=y...ra-Fix.zip&name=Camera-Fix.zip&c=5648714b8fa7
does it support blisspop rom
someshthakur said:
Try SaberMod for performance and Uber for battery life.
Here is the Camera fix for all roms based on old device tree.
Link:- https://docviewer.yandex.com/?url=y...ra-Fix.zip&name=Camera-Fix.zip&c=5648714b8fa7
Click to expand...
Click to collapse
According to u which is the best kernel mod to download for stock cm12?????????
which kernal is better for blisspop saber or uber
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
The kernel is based off latest sources from Samsung and is compatible with all roms . Over stock kernel this kernel possesses following enhancements
Insecured
adb runnable as root
init.d support
Fsync On/Off switch.
Overclocked to 1.6Ghz and Underclocked to 200Mhz
Built Using Linaro- 5.2 Toolchain.
Frandom driver- Fast Kernel Number Generator..
Support for crc-toggle..
Add LZ4 decompressor module
Add support for Zswap.
Upstream ZRAM with lz4 compression.
Now powered by AROMA Installer.
Support for Gentle fair sleeper toggle.
Dynamic Fsync Control - A driver originally written by faux123- Disables Fsync when phone is being used causing significant IO boost.
Power efficient workqueue
SELinux set to permissive
Automatic busybox installation
Lock initial TCP window size to 64k (Improves network ping and output)
Improved filesystem mounting flags - NOATIME and NODIRATIME
Huge update to kernel.org mainline 3.10.105
IOScheduler
block: Added ROW IOScheduler
Disabled CRC check in MMC for 30% extra performance with IO
block: Add BFQ IOScheduler
block: Add FIOSP scheduler
Faux Sound Control 2.0 - A sound hack driver by faux123 ported to sprd codecs by me
Uses live Ramdisk patching during flashing, so need not worry about ROMs on which you are flashing on.
Optimized square root algorithm
Governors enabled: ondemand, interactive.
IntelliPlug- Great balance between battery life and performance
Optimizations to SLUB memory allocator
Disabled MMC CRC check for extra 30% boost in IO
zRAM compression algorithm
Optimized Console FrameBuffer for upto 70% increase in Performance.
Support for ARCH_Power to reduce Power-Consumption and increase Battery-Life.
Kernel Samepage Merging
Enabled arch power
Support for Larch Power feature (should improve Battery-Life).
Added bunches of TCP Congestion Algorithm
ARM: Removed various debug traces
Download:
Method1:
Install Vegito kernel updater app from Play Store
Download and Install.
Free Version
Paid Version
Method 2:
You can download from here
Vegito 4.5
Google+ Community (Beta testing and releases)
https://plus.google.com/u/0/communities/107248021342303532678
INSTRUCTIONS
Just flash the zip in twrp and you are good to go!
XDA:DevDB Information
Vegito Kernel , Kernel for the Samsung Galaxy Core Prime
Contributors
Dreamstar
Source Code: https://github.com/DreamStar001/android_kernel_samsung_coreprimeve3g_vegito
Kernel Special Features:
Version Information
Status: Beta
Created 2016-09-08
Last Updated 2017-05-22
Reserved
Changelog
Vegito 4.2 - 11/April/2017
Code:
- Now powered by AROMA Installer.
- Faux Sound Control 2.0 - A sound hack driver by faux123 ported to sprd codecs by me
- Huge update to kernel.org mainline 3.10.105
- Support Fsync & Software CRC Control.
- Smart ramdisk patching mechanism- low size, wider compatibility
- NOATIME and NODIRATIME by default
- Compatible with all roms? ( Not tested yet )
Vegito 3.0 -09/Nov/16
Code:
-Upstream update to 3.10.102
-SELinux set to permissive
-Disabled Gentle fair sleepers
-Overclocked to 1.4GHz
-Added frandom driver
-Added ThunderPlug CPU hotplug
-Added lionfish governor
-Enabled arch power
-Dynamic Fsync Control
-Other Performance improvements
-ARM: Removed various debug traces
Vegito 2.0 - 20/Sep/16
Code:
-Added Bunches of TCP Congestion Algorithm
-Added Fiosp , Sioplus , Zen Scheduler
-Added CPU Hotplugs ported by @doesnexits
-IntelliPlug
-MSM Hotplug
-Bricked Hotplug
-Alucard Hotplug
-init.d support
-Automatic busybox installation
-Improved boot time
-Other optimizations
Vegito 1.0
Code:
- Initial Release
Wait
It's a kernel but we flash a Boot.img in boot sector?
Also can't i just use apps like Rashr?
ETheHedgehog said:
Wait
It's a kernel but we flash a Boot.img in boot sector?
Also can't i just use apps like Rashr?
Click to expand...
Click to collapse
Flashing via recovery is recommended as stated in OP. Don't bomb thread with stupid questions.
What app would you recommend so that we can further tweak, or adjust the settings?
Paolonicus said:
What app would you recommend so that we can further tweak, or adjust the settings?
Click to expand...
Click to collapse
Use kernel adiutor .
Gamersab said:
Flashing via recovery is recommended as stated in OP. Don't bomb thread with stupid questions.
Click to expand...
Click to collapse
Thanks for being so "polite" ._.
I'll test this when i can
There are no CPU Hotplugs.
Paolonicus said:
There are no CPU Hotplugs.
Click to expand...
Click to collapse
Hello sorry about the delay check thread again i updated link ( vegito 2.0 )
Regards
Hello! Thanks for your work. In the 2nd version as well as in the first time is not displayed in the use of frequencies CPU Spy Plus-Free. What can you say about this?
BoxaS said:
Hello! Thanks for your work. In the 2nd version as well as in the first time is not displayed in the use of frequencies CPU Spy Plus-Free. What can you say about this?
Click to expand...
Click to collapse
Use kernel auditor
Request:
Next build should include NTFS support too.
Gamersab said:
Request:
Next build should include NTFS support too.
Click to expand...
Click to collapse
You need OTG?
doesntexits said:
You need OTG?
Click to expand...
Click to collapse
OTG is already supported by our device.
V2.0 Update
Changelog
Added Bunches of TCP Congestion Algorithm
Added Fiosp , Sioplus , Zen Scheduler
Other optimizations
I tried your custom kernel v 3.0 but it made bootloop for me, plz fix it
my device is core prime SM-G361H
Thanks at all
magaedy said:
I tried your custom kernel v 3.0 but it made bootloop for me, plz fix it
my device is core prime SM-G361H
Thanks at all
Click to expand...
Click to collapse
Are you running stock? If yes then enable OEM Unlock in developer options.
I'm already enabled OEM unlock, but still make bootloop
magaedy said:
I'm already enabled OEM unlock, but still make bootloop
Click to expand...
Click to collapse
Are you sure your phone model is g361h?
V-3.0 Update
Changelog
Upstream update to 3.10.102
SELinux set to permissive
Disabled Gentle fair sleepers
Overclocked to 1.4GHz
Added frandom driver
Added ThunderPlug CPU hotplug
Added lionfish governor
Enabled arch power
Dynamic Fsync Control
Other Performance improvements
ARM: Removed various debug traces
You know where to get the latest stuff, dont you?
Also first post updated
WarningI will not be responsible for anything that happens to your Redmi 2 after flashing this kernel. If you don't know how to unbrick your phone please don't make any modifications and stay with stock MIUI.
What is HexaTurbo?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HexaTurbo kernel is meant to be the best gaming kernel with awesome Zetsubou features added on top of CAF/CM kernel. Kernel source will always be kept in sync with new caf(LA.BR.1.2.9_rbx.xx) and mainstream linux(3.10.y) updates. For now the kernel dosn't include features like Undervolt and other features.
Zetsubou
This kernel is 100% based on Zetsubou kernel, that is the best performance/stability balance for redmi 2! So all new Zetsubou features will be added and optimized much as possible to deliver the best performance for Root and Non-Root users, what? non-root users? yes! this kernel was made to be used without root! so you can get the max performance in your games without using Kernel adiutor or EX kernel manager!! (cof... cof.... Pokemon GO)
Features:
NEON optimization
linux version 3.10.105
compiled with UBER GCC 4.9
GPU TurboClock support upto 620MHz
based on caf branch LA.BR.1.2.9_rbx.xx
General optimizations
True 1.2ghz clock
wake gestures: doubletap2wake, sweep2wake (up,down,left,right)
sound control for root users (not tested)
sweep2sleep support!
I/O schedulers: sio, deadline, fiops, noop, bfq, cfq, fifo, sioplus, vr, tripndroid and zen
governors: interactive, ondemand, conservative, performance, chill, relaxed, impulse, bioshock and despair
hotplug: lazyplug
KCAL advanced color control
adreno idler
DriveDroid support
advanced TCP congestion algorithms
force fast charge support
disabled crc check
FS: exfat, NTFS & sdcardfs support
f2fs updated upto v4.10-rc1-3.10
frandom support
reduced load average
fsync on/off support
Check my and Ahish source for other features
-- Download Now --
-- 2017 NewGen Logo Download --
Use EX KERNEL MANAGER or KERNEL ADIUTOR to control all features
Installation:
-Download the zip file and save it into the root directory of external storage
-Reboot to recovery mode and flash the zip file
-Reboot device
It's recommended to flash HexaTurbo only over stock kernel
I recomend using Custom installation for better choices, since you are a gamer!
Kernel will boot with max CPU/GPU frequencies that you select, ex: 1.21GHz/620MHz
Credits:
-ketut.kumajaya hats off to this man for all the work he did for Redmi 2
-osm0sis for his amazing AnyKernel script
-flar2 for his awesome features
-Ashish94 for helping me in almost everything!
-iamsubhranil for also helping me out!
XDA:DevDB Information
[Kernel][N-M][UBER-GCC][NewGen] HexaTurbo 2017, Kernel for the Xiaomi Redmi 2
Contributors
TecnoTailsPlays, Ashish94, iamsubhranil, All devs from kernel guides and mods
Source Code: https://github.com/TecnoAquaPlays/android_kernel_wingtech_HexaTurbo/tree/master
Kernel Special Features: This kernel is optimized for gaming, make your redmi 2 better and cooler!
Version Information
Status: Stable
Current Stable Version: 20170312
Stable Release Date: 2017-03-13
Created 2017-02-09
Last Updated 2017-03-24
Changelog 20170313 NewGen
-Fix random reboots on 2014819
-Stock CPU clock 1.21ghz (1.8ghz or 2.1ghz are fake overclock)
-Add KSM
-Sync Zetsubou sources
-Add F2FS & SDCARDFS support <---| Check Zetsubou thread for how to format to thease file system's
-LineageOS source
-Many other optimizations
Changelog 20170212 Equalizer
-Remove Fake CPU clocks
-Remove fake overclock to 2.11ghz and go back to "Supported 1.3ghz"
-Optimized aroma installer
-Minor things
GPU overclock is Real, and all clocks too, so I din't change anything for now
Changelog 20170210-something
-Totally new freequency table for GPU/CPU, you will get way smoother UI and games
-Minor fixes
Changelog 20170210-Fix
-Switch back to UBER gcc 4.9 becouse some issues with CPU
-Optimize aroma installer a little bit
-Testing new CPU overclock code
-Other minor stuff
Changelog 20170210
-Switch to UBER gcc 6.0
-Enable -O3 optimization
Changelog 20170209:
-Initial build
Can I flash with custom rom like AOSP?
Can i flash it on Validus?
Sent from my 2014813 using Tapatalk
Yousef Algadri said:
Can i flash it on Validus?
Sent from my 2014813 using Tapatalk
Click to expand...
Click to collapse
Sure, if it din't work, sent me dmesg and logcat
zmanz79 said:
Can I flash with custom rom like AOSP?
Click to expand...
Click to collapse
I'm not sure, since this kernel is for cm based roms, you can give it a try....
Good job, my Redmi 2 is fast. Amazing! I'm using mokee 7.1 nitghly 20170207
no sim cards detected after flashing the kernel but on dirty flashing the rom it gets detected.the rom is RR N latest .
Yeah techno is doing awesome work
AOSPExtended..
Custom installation not work for CPU and Color Control. I have to manually adjust all the setting on each reboot. Especially for CPU control, it need time to get 2112 , it keep lock down to 800 on each reboot. Anyway good performance .
bro 2.11 ghz for cpu...... wtf... cool man... installing it right away
Could you add another Hotplug? AutoSMP would be nice
taalojarvi said:
Could you add another Hotplug? AutoSMP would be nice
Click to expand...
Click to collapse
I will try
New build is out!
-Switch to UBER GCC 6.0
-Enable -O3 optimization
New features will be added in future builds, becouse I need time to test other -unstable- features
DOWNLOAD
TecnoTailsPlays said:
New build is out!
-Switch to UBER GCC 6.0
-Enable -O3 optimization
New features will be added in future builds, becouse I need time to test other -unstable- features
DOWNLOAD
Click to expand...
Click to collapse
Work in AOSP EX ?
andreymixmax said:
Work in AOSP EX ?
Click to expand...
Click to collapse
Look, I only use LineageOS, so I can't test in others roms, you will have to try by yourself
LOL, if someone is using the kernel, please open CPU-Z and kernel adiutor and sent me a screenshot of the freequencyes, I think the UBER 6.0 glitched the kernel
New build online!!
-Fix weird stuff on CPU-Z and other apps
-Switch back to UBER gcc 4.9 becouse CPU problems
-Edit aroma installer picture time
-Optimize CPU overclock code (Report if you had random reboots only with this kernel in LineageOS)
--DOWNLOAD--
@TecnoTailsPlays
Whilst testing your new update, I realized that the UI was really laggy. So I checked my frequencies and governor via KA and found out that the max frequency was capped at 800 mhz.
I tried changing frequencies and the frequencies wouldn't stick. If I tried raising it to 1209, it would bounce back to 800.
I tried changing governors too. Unfortunately issue didn't have a workaround so I Reverted to Zetsubou
My modem is 2014818 and I have the 1Gb Variant. I run AiCP 12.1
taalojarvi said:
@TecnoTailsPlays
Whilst testing your new update, I realized that the UI was really laggy. So I checked my frequencies and governor via KA and found out that the max frequency was capped at 800 mhz.
I tried changing frequencies and the frequencies wouldn't stick. If I tried raising it to 1209, it would bounce back to 800.
I tried changing governors too. Unfortunately issue didn't have a workaround so I Reverted to Zetsubou
My modem is 2014818 and I have the 1Gb Variant. I run AiCP 12.1
Click to expand...
Click to collapse
Did you try the latest build? this was fixed
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ABOUT:
BlackScreen is my custom kernel made for custom aosp/caf roms
This started as just being the kernel in my aicp builds, but as more and more users of other roms started using it I realized I should make a separate thread
====================================================================================================
BlackScreen is meant to give you great battery life and performance (depending on how you tune it), essentially I tried to optimize it for everyday usage (gaming, media consumption. browsing the web, all that stuff), I'm not aiming to have the highest Antutu score (although it is very high, it's just not my focus), you see benchmarks don't really reflect actual everyday usage.
The main thing that I do is port good features and optimizations from the various OnePlus 3/3t kernels (they have many great kernel devs and a lot of their work can benefit us too), I also optimize the kernel settings and stuff like that
BlackScreen is based off of the lineage qcom msm8996 kernel https://github.com/LineageOS/android_kernel_qcom_msm8996/tree/lineage-17.1
https://www.androidfilehost.com/?w=files&flid=302496
Mirror: https://drive.google.com/drive/folders/19PBy5M5EqCr02Ax5Kw8x2bjajpdtHrn3?usp=sharing
Note:
The -oc zip is simply an overclocked version of the regular build
In twrp go to the install page, flash the zip, and reboot
CPU:
Interactive governor
Ondemand governor
Conservative governor
Powersave governor
Performance governor
darkness governor
Lionfish governor
nebula governor
wheatley governor
lionheart governor
bioshock governor
impulse governor
Alucard governor
ConservativeX governor
Elementalx governor
Nightmare governor
Smartmax governor
Yankactive governor
Despair governor
blu_active governor
Optional overclock
Voltage control
Screen
kcal
Backlight dimmer
I/O:
Improved deadline
improved cfq
bfq
sio
fiops
tripndroid
sioplus
zen
maple
Virtual memory:
various optimizations
zram
zswap
entropy:
some optimizations
tcp-algorithms:
bic
westwood
htcp
hstcp
vegas
scalable
lp
veno
yeah
illinois
hybla
Misc:
wireguard support
fsync toggle
Many more optimizations
Several wakelocks have been blocked
Added the ability to tweak the thermal throttle settings for the CPU (be very careful with this)
USB fast charge
faster unlock
improved network performance
Option to enable/disable gentle fair sleepers
Option to enable/disable software crc control
vibrator intensity control
arch power savings
8.0+ is compiled with clang
Quavosh for the amazing banners
darkobas
codeworkx
Sultanxda
Franco
Flar2
dabug123
GalaticStryder
nathanchance
KuranKaname
DD3Boh
There are many more
Telegram group:
https://t.me/BlackScreenKernel
Regular build:
https://github.com/AICP/kernel_leeco_msm8996/tree/q10.0
Overclocked build:
https://github.com/mosimchah/kernel_leeco_msm8996/tree/q10.0-oc
anykernel3: https://github.com/mosimchah/AnyKernel2/tree/zl1
reserved
Reserved
Reserved
Also congrats
also reserved
Reserved
Thank you?
################################################################
BlackScreen 7.1################################################################
Changes:
1. Did a fresh rebase on the lineage qcom msm8996 kernel https://github.com/LineageOS/android_kernel_qcom_msm8996/tree/lineage-17.1
This includes tons of optimizations and fixes, also google kernel common is merged in as well as the latest caf tag and wifi driver, and it is fully upstreamed to Linux 3.18.140
2. Included the battery percentage fix from @snow
3. Added back wireguard
telegram group: https://t.me/BlackScreenKernel
Download:
Regular build:
https://www.androidfilehost.com/?fid=4349826312261752125
Overclocked build:
https://www.androidfilehost.com/?fid=4349826312261752124
is it possible that you could update BlackScreen 9 with all these updates or are they only for android 10
ps:thx for all the good work anyway
lukanz said:
is it possible that you could update BlackScreen 9 with all these updates or are they only for android 10
ps:thx for all the good work anyway
Click to expand...
Click to collapse
For some of the updates yes although it's probably not needed as the Q kernel will probably work on pie
mosimchah said:
For some of the updates yes although it's probably not needed as the Q kernel will probably work on pie
Click to expand...
Click to collapse
It really does work on android pie ...i have installed it on nitrogen os 9 (x722) and works perfectly
thx again for your efforts
i've been flash your latest version AICP15, can i flash the overclock kernel version zip to get a better performance? can i directly flash it in without wipe after i flash the Magisk? However thanks for your good work
Zero_Sherd said:
i've been flash your latest version AICP15, can i flash the overclock kernel version zip to get a better performance? can i directly flash it in without wipe after i flash the Magisk? However thanks for your good work
Click to expand...
Click to collapse
Yes although it probably won't give you that much better performance since the higher frequency will make it heat up faster which will in turn make it throttle faster to protect your device from heat damage, so you might see better performance for short tasks like opening apps and browsing the web, but if you're playing pubg for a while it'll probably be about the same performance wise, glad you like my work
################################################################
BlackScreen 7.2################################################################
Changes:
1. Did a fresh rebase on the lineage kernel, this includes tons of updates from the lineage qcom msm8996 kernel which has the latest caf tag and google kernel common changes merged in
2. Updated wireguard
3. Cleaned up the kernel additions a bit
4. Updated the zip to anykernel3, we were using anykernel2 before https://forum.xda-developers.com/showthread.php?t=2670512
telegram group: https://t.me/BlackScreenKernel
Download:
Regular build:
https://www.androidfilehost.com/?fid=8889791610682893853
Overclocked build:
https://www.androidfilehost.com/?fid=8889791610682893854
I am using this kernel with AICP 14 (2020-03-19) and everything works. I can't say if the rom works better now but it certainly doesn't work worse! Thanks for all the wonderful work!
################################################################
BlackScreen 7.3################################################################
Changes:
1. Merged in tons of updates from the lineage qcom msm8996 kernel which has the latest caf tag and google kernel common changes, and some other nice stuff
2. Blocked hal_bluetooth_lock by default, this caused a wakelock whenever bluetooth was enabled, and blocking it doesn't seem to cause any issues (credit to Kevin Puertas https://github.com/kprkpr)
telegram group: https://t.me/BlackScreenKernel
Download:
Regular build:
https://www.androidfilehost.com/?fid=8889791610682941868
Overclocked build:
https://www.androidfilehost.com/?fid=8889791610682941867
thx this version has improved battery life really a lot by reducing the drain
mosimchah said:
################################################################
BlackScreen 7.3################################################################
Changes:
1. Merged in tons of updates from the lineage qcom msm8996 kernel which has the latest caf tag and google kernel common changes, and some other nice stuff
2. Blocked hal_bluetooth_lock by default, this caused a wakelock whenever bluetooth was enabled, and blocking it doesn't seem to cause any issues (credit to Kevin Puertas https://github.com/kprkpr)
telegram group: https://t.me/BlackScreenKernel
Download:
Regular build:
https://www.androidfilehost.com/?fid=8889791610682941868
Overclocked build:
https://www.androidfilehost.com/?fid=8889791610682941867
Click to expand...
Click to collapse
mosimchah said:
################################################################
BlackScreen 7.3################################################################
Changes:
1. Merged in tons of updates from the lineage qcom msm8996 kernel which has the latest caf tag and google kernel common changes, and some other nice stuff
2. Blocked hal_bluetooth_lock by default, this caused a wakelock whenever bluetooth was enabled, and blocking it doesn't seem to cause any issues (credit to Kevin Puertas https://github.com/kprkpr)
telegram group: https://t.me/BlackScreenKernel
Download:
Regular build:
https://www.androidfilehost.com/?fid=8889791610682941868
Overclocked build:
https://www.androidfilehost.com/?fid=8889791610682941867
Click to expand...
Click to collapse
thanks for ur continued hard work :angel: hopefully this fixes battery drain.
@mosimchah man this kernel is fantastic and is really improving battery drain on LOS. Keep up the good work!
A question: do you have any specific recommendations for max battery life - I don't do gaming or anything intensive really so battery is what matters the most to me. Also: what app do you use to tweak parameters? I have been using kernel adiutor for ages but as I understand it's not mantained anymore so am open to alternatives...thanks!
According to the magisk installation instructions https://topjohnwu.github.io/Magisk/install.html , we have to take the boot.img from the rom zip and patch it then flash it, and only then install the kernel. I installed lineage-17.1-20201128-nightly-zl1-signed.zip , will the kernel have problem with the above installation? Cuz in the past I always remembered I just flashed magisk but now it says it's no longer recommended and that I should patch it so I'm not sure how it will work with the kernel
JustJoe123 said:
According to the magisk installation instructions https://topjohnwu.github.io/Magisk/install.html , we have to take the boot.img from the rom zip and patch it then flash it, and only then install the kernel. I installed lineage-17.1-20201128-nightly-zl1-signed.zip , will the kernel have problem with the above installation? Cuz in the past I always remembered I just flashed magisk but now it says it's no longer recommended and that I should patch it so I'm not sure how it will work with the kernel
Click to expand...
Click to collapse
Afaik those instructions are pretty much just for people who are on the stock rom without a custom recovery, in your situation you can just flash magisk with twrp and it will all be fine assuming you're using the stable version