Hello, im facing an issue.
Ive made a rollback to 5.0.2 by this guide:
http://forum.xda-developers.com/dell-venue/general/7840-succeed-to-unbrick-t3205024
But now when i want to go back to 5.1 i cant.
I cant install ota, even through CWM. Also there is no recovery, at least i cant get into it, when I press "Recovery mode" in bootloader it just rebooting back to bootloader. No changes, nothing.
But 5.0.2 working fine(just cant do factory reset)
Will be gratefull for any assisstance
You'll need the droidboot version that uses twrp instead of cwm. With that, installing the 5.1 update works just fine.
Sent from my Venue 8 7840 using XDA Free mobile app
Can you please share the link?
PS: How to fix stock recovery? any solution for this?
When im trying to install using TWRP(like cwm tethered) im receiving errors
Updating IFWI....
Error executing updater binary
Error flashing zip
Unable to mount /Data
...done
Unable to mount storage
olvrick said:
When im trying to install using TWRP(like cwm tethered) im receiving errors
Updating IFWI....
Error executing updater binary
Error flashing zip
Unable to mount /Data
...done
Unable to mount storage
Click to expand...
Click to collapse
do you mind giving a bit more information?
What version of TWRP are you using?
Is the update on a sdcard or internal memory?
Can you export the error logs from twrp and post it to pastebin or sth like that?
toxic_garden said:
do you mind giving a bit more information?
What version of TWRP are you using?
Is the update on a sdcard or internal memory?
Can you export the error logs from twrp and post it to pastebin or sth like that?
Click to expand...
Click to collapse
Im using TWRP from tethering CWM package for rooting^ IntelAndroid-FBRL-07-24-2015
Update downloaded here from this post: http://forum.xda-developers.com/showpost.php?p=60632439&postcount=21
Memory: external sd card
olvrick said:
Im using TWRP from tethering CWM package for rooting^ IntelAndroid-FBRL-07-24-2015
Update downloaded here from this post: http://forum.xda-developers.com/showpost.php?p=60632439&postcount=21
Memory: external sd card
Click to expand...
Click to collapse
don't use the update from this link. I don't want to say it's not working but at least for me it was the best (and simplest) option to boot up 5.0.1 after fresh installation and let the tablet download the 5.1 update by itself. After download is complete, it can be installed via TWRP-Recovery without problems.
toxic_garden said:
don't use the update from this link. I don't want to say it's not working but at least for me it was the best (and simplest) option to boot up 5.0.1 after fresh installation and let the tablet download the 5.1 update by itself. After download is complete, it can be installed via TWRP-Recovery without problems.
Click to expand...
Click to collapse
Im facing an issue that neither CWM nor TWRP couldnt mount /data/ partition
Thanks
toxic_garden said:
don't use the update from this link. I don't want to say it's not working but at least for me it was the best (and simplest) option to boot up 5.0.1 after fresh installation and let the tablet download the 5.1 update by itself. After download is complete, it can be installed via TWRP-Recovery without problems.
Click to expand...
Click to collapse
Thanks, managed to flash 5.1 but still cant go inside stock recovery. Cant do factory reset...
Any ideas, how to fix this?
Related
I downloaded the Beanstalk KitKat ROM today and planned to install it to replace Jellybean. I copied the ROM zip and gapps to the internal storage, unplugged the phone and rebooted into recovery. I wiped the cache and data, but when I went to install the ROM zip it wouldn't work; it returns an error of "set_metadata_recursive: some changes failed" with a status of 7. Before I rebooted into Android to re-copy the files over, assuming something went wrong in the copy process, CWM prompted me saying that I might have lost root and whether or not it should fix it. I hit yes. Now, I cannot reboot back into Android. The phone hits the HTC loading screen, reboots, and then ends up back at CWM.
Is there any way I can get a ROM zip on my phone so that I can fix this? Or is my phone essentially bricked?
Any help is appreciated.
If you have adb drivers installed on your computer, you can do this: adb push path/to/ROM.zip /sdcard/ROM.zip make sure you mount data first. See this thread: http://forum.xda-developers.com/showthread.php?p=37535001
Are you using the newest version of tour recovery? You need the latest cwm or twrp beta to flash kitkat ROMs.
Sent from my Droid DNA using Tapatalk
jamiethemorris said:
If you have adb drivers installed on your computer, you can do this: adb push path/to/ROM.zip /sdcard/ROM.zip make sure you mount data first. See this thread: http://forum.xda-developers.com/showthread.php?p=37535001
Are you using the newest version of tour recovery? You need the latest cwm or twrp beta to flash kitkat ROMs.
Sent from my Droid DNA using Tapatalk
Click to expand...
Click to collapse
I'm running CWM 6.0.3.1. I assume this is outdated now as I installed it a while ago. I'll find a download for the latest one and install that too.
Thanks for your help.
Klayderpus said:
I'm running CWM 6.0.3.1. I assume this is outdated now as I installed it a while ago. I'll find a download for the latest one and install that too.
Thanks for your help.
Click to expand...
Click to collapse
Use this one http://invisiblek.org/dlx/recovery/recovery-clockworkmod-6.0.4.5-dlx-UNOFFICIAL.img
hi i am had lg e970 of AT&T with rom paranoid android 4.4.2 latest update with teamwin recovery 2.7.0.1 i am allways
trying to install some rom and its faild saying "error flashing zip (any rom zip) updating partition details..."
i am also trying to install rom via cwm and getting error status 7 allways notice: only mods i can instal
and i had emulated storage allways how to solve this problem and allways cannot mount data
please suggest to my ideas
thanks for the helpers
danielad200 said:
hi i am had lg e970 of AT&T with rom paranoid android 4.4.2 latest update with teamwin recovery 2.7.0.1 i am allways
trying to install some rom and its faild saying "error flashing zip (any rom zip) updating partition details..."
i am also trying to install rom via cwm and getting error status 7 allways notice: only mods i can instal
and i had emulated storage allways how to solve this problem and allways cannot mount data
please suggest to my ideas
thanks for the helpers
Click to expand...
Click to collapse
Last I heard, people were having issues flashing with the updated 2.7.0.1 twrp. The error status 7 you are getting is from using a jb recovery and not an updated kk recovery. The recovery that needs to be used is in the OP of PA if you are using brothaedhung's rom.
http://www.androidfilehost.com/?fid=23269279319198453
Ok i will check that and update what about emulated storage?
danielad200 said:
Ok i will check that and update what about emulated storage?
Click to expand...
Click to collapse
When you click on the link you will see the name of the zip...ext-sd-efs... Allows the efs to be backed up and fixes the ext-sd/emulated storage issue.
I have been running KitKat ROMs since I got this phone months ago, so naturally I went with the KitKat Ext SD version of TWRP. I decided to try MIUI which was 4.2.2 Jellybean, and I was experiencing the Status 7 messages you are mentioning.
Potential solution:
Install the latest (6.0.4.7) PhilZ Touch Recovery for the E970 from here:
http://forum.xda-developers.com/showthread.php?t=2201860
Once installed you have to force using the update-binary described in this post:
http://forum.xda-developers.com/showpost.php?p=43707326&postcount=8
Phil3759 said:
FAQ
11- various status 7 errors: format() expects 5 args, got 4 - set_permissions errors...
Fixes:
- start of 6.15.4, PhilZ Touch added an option to force using the update-binary that comes in your zip.
Click to expand...
Click to collapse
I was just on the MJ9 firmware had no problem flashing other roms using TWRP. I read that TWRP was having issues flashing ND7 and seen that using Philz was the best thing to use, so I downloaded Philz and saved it, uploaded it to my external SD card along with the other required files for ND7. Rebooted to the recovery formatted the internal storage,dalvik and cache. First thing I did was try to install Philz. I instantly got failed and this message "assert failed: getprop (ro.product.device") I thought it had something to do with the Kitkat update. But, then I read on the forum that one user was having trouble installing Philz also and the user installed the ND7 first then Philz and it installed. So, I decided to try that. The update installed just fine but Philz still gave me the same error. I decided to try to install the radio that gave me the same error. I already had Liquid smooth 4.4 downloaded on my SD card and that wouldn't flash either but the gapps installed. I have installed the newest version of TWRP still no luck. I can't even use Airdroid to transfer to either SD card or internal storage (Later found out its an app problem). What else can I do to get the ball rolling?
DCVR 614 said:
I was just on the MJ9 firmware had no problem flashing other roms using TWRP. I read that TWRP was having issues flashing ND7 and seen that using Philz was the best thing to use, so I downloaded Philz and saved it, uploaded it to my external SD card along with the other required files for ND7. Rebooted to the recovery formatted the internal storage,dalvik and cache. First thing I did was try to install Philz. I instantly got failed and this message "assert failed: getprop (ro.product.device") I thought it had something to do with the Kitkat update. But, then I read on the forum that one user was having trouble installing Philz also and the user installed the ND7 first then Philz and it installed. So, I decided to try that. The update installed just fine but Philz still gave me the same error. I decided to try to install the radio that gave me the same error. I already had Liquid smooth 4.4 downloaded on my SD card and that wouldn't flash either but the gapps installed. I have installed the newest version of TWRP still no luck. I can't even use Airdroid to transfer to either SD card or internal storage (Later found out its an app problem). What else can I do to get the ball rolling?
Click to expand...
Click to collapse
Seems like you still have the wrong TWRP for your device.
Here is a Philz Zip with the getprop asserts removed, so it should flash just fine in your current TWRP.
gr8nole said:
Seems like you still have the wrong TWRP for your device.
Here is a Philz Zip with the getprop asserts removed, so it should flash just fine in your current TWRP.
Click to expand...
Click to collapse
That installed and worked. The ND7 Radio also installed. How do I fix the getprop asserts?
gr8nole said:
Seems like you still have the wrong TWRP for your device.
Here is a Philz Zip with the getprop asserts removed, so it should flash just fine in your current TWRP.
Click to expand...
Click to collapse
Okay, I got liquid smooth installed along with the gapps. Thank you for all your help. What can I do to get this get props corrected?
DCVR 614 said:
Okay, I got liquid smooth installed along with the gapps. Thank you for all your help. What can I do to get this get props corrected?
Click to expand...
Click to collapse
It is already fixed now that you have a proper i605 recovery installed.
Sent from my SCH-I605
gr8nole said:
It is already fixed now that you have a proper i605 recovery installed.
Sent from my SCH-I605
Click to expand...
Click to collapse
OH! Thank you so much. I appreciate your help!
Hi, I am new to the whole jailbreaking. I followed this video (hZyfWpBJpiE) to root the tablet (6 gb).
In this process, I used NT16or8gbV47SDimagefile and I set the tablet to factory setting, deleted partitions, and deleted dalvik cache. I may have repeated this process because i thought it wasnt rooted because my screen looked different from the video guys tablet
Then followed this video (GZAQpeCtFi0) to install CWM Recovery 4.0.4.8. It booted to the recovery setting screen but I started seeing green lines to the right of my screen then it shut off to restart.
It wouldnt respond when I tried it again so I repeated the first process and tried again but still, same thing happens.
Does anyone have ideas on how to fix this?
Ultimately, I want to install the CM11...
Thanks in Advance
I used the Root Recovery Tools to run the 4.0.4.8
PfanneKuchenAngriff said:
Hi, I am new to the whole jailbreaking. I followed this video (hZyfWpBJpiE) to root the tablet (6 gb).
In this process, I used NT16or8gbV47SDimagefile and I set the tablet to factory setting, deleted partitions, and deleted dalvik cache. I may have repeated this process because i thought it wasnt rooted because my screen looked different from the video guys tablet
Then followed this video (GZAQpeCtFi0) to install CWM Recovery 4.0.4.8. It booted to the recovery setting screen but I started seeing green lines to the right of my screen then it shut off to restart.
It wouldnt respond when I tried it again so I repeated the first process and tried again but still, same thing happens.
Does anyone have ideas on how to fix this?
...
Click to expand...
Click to collapse
You should not have deleted any partition. Also I am not aware of a CWM v4.0.4.8 for the Nook Tablet, are you sure you downloaded tools intended for the Nook Tablet?
I'd suggest that you try the recovery-to-stock method posted at http://raywaldo.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/. See http://forum.xda-developers.com/showthread.php?t=2575489 for more info/pointers.
digixmax said:
You should not have deleted any partition. Also I am not aware of a CWM v4.0.4.8 for the Nook Tablet, are you sure you downloaded tools intended for the Nook Tablet?
I'd suggest that you try the recovery-to-stock method posted at http://raywaldo.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/. See http://forum.xda-developers.com/showthread.php?t=2575489 for more info/pointers.
Click to expand...
Click to collapse
Thanks for your reply. I was able to get it back to factory setting but when following direction i get a message that says E: unable to mound /bootdata
I have no idea what is going on anymore
PfanneKuchenAngriff said:
Thanks for your reply. I was able to get it back to factory setting ...
Click to expand...
Click to collapse
Meaning you were able to get your NT back to running stock ROM?
but when following direction i get a message that says E: unable to mound /bootdata
...
Click to expand...
Click to collapse
Which direction are you referring to?
digixmax said:
Meaning you were able to get your NT back to running stock ROM?
Which direction are you referring to?
Click to expand...
Click to collapse
I was able to get back to running stock ROM. Then I followed the other linke ttp://forum.xda-developers.com/show....php?t=2575489
After I went through the directions, I got the unable to mount error
Which version of recovery did you use?
digixmax said:
Which version of recovery did you use?
Click to expand...
Click to collapse
I rooted the NT with: NT16or8gbV47SDimagefile.img
I used this version: flashable_CWM_6.0.4.8_chrmhoffmann
And I have these to install:
cm-11-20141102-NIGHTLY-acclaim
gapps-kk-20140606-signed
I think I tried 3 different ways to install it...do I need both TWRP and CMW recovery?
I read that TWRP was buggy and when it didn't work, I tried CMW recovery.
Right now, I have the NT back to rooted stated and nothing else. I followed this direction last, I think:
http://forum.xda-developers.com/showthread.php?t=2692403
The other video said I can use the root flasher app to run the CMW recovery so I tried that as well
Thanks
PfanneKuchenAngriff said:
I rooted the NT with: NT16or8gbV47SDimagefile.img
I used this version: flashable_CWM_6.0.4.8_chrmhoffmann
And I have these to install:
cm-11-20141102-NIGHTLY-acclaim
gapps-kk-20140606-signed
I think I tried 3 different ways to install it...do I need both TWRP and CMW recovery?
I read that TWRP was buggy and when it didn't work, I tried CMW recovery.
Right now, I have the NT back to rooted stated and nothing else. I followed this direction last, I think:
http://forum.xda-developers.com/showthread.php?t=2692403
The other video said I can use the root flasher app to run the CMW recovery so I tried that as well
Thanks
Click to expand...
Click to collapse
Since your NT is running (rooted) stock, you'd need SD-based recovery to flash CM/Gapps onto EMMC. Flashing CM11 requires CWM version later than 6.0.4.5 or TWRP version later than 2.6.3.0, unfortunately there does not seem to be any compilation of SD-based CWM versions 6.0.4.5 or later for the Nook Tablet, hence we are stuck with TWRP 2.6.3.0+ as the only SD-based recovery for flashing CM11 onto the NT. (The flashable_CWM_6.0.4.8_chrmhoffmann is for flashing CWM 6.0.4.8 onto your NT EMMC to replace the stock recovery; the root flasher app recovery is likely a too old recover version to be compatible with CM11).
A potential alternative course of action is to first flash CM10.x for which there are SD-based CWM recovery available (see http://forum.xda-developers.com/showpost.php?p=51377882&postcount=163), then upgrade from CM10.x to CM11 (see http://forum.xda-developers.com/showthread.php?t=2670589).
digixmax said:
Since your NT is running (rooted) stock, you'd need SD-based recovery to flash CM/Gapps onto EMMC. Flashing CM11 requires CWM version later than 6.0.4.5 or TWRP version later than 2.6.3.0, unfortunately there does not seem to be any compilation of SD-based CWM versions 6.0.4.5 or later for the Nook Tablet, hence we are stuck with TWRP 2.6.3.0+ as the only SD-based recovery for flashing CM11 onto the NT. (The flashable_CWM_6.0.4.8_chrmhoffmann is for flashing CWM 6.0.4.8 onto your NT EMMC to replace the stock recovery; the root flasher app recovery is likely a too old recover version to be compatible with CM11).
A potential alternative course of action is to first flash CM10.x for which there are SD-based CWM recovery available (see http://forum.xda-developers.com/showpost.php?p=51377882&postcount=163), then upgrade from CM10.x to CM11 (see http://forum.xda-developers.com/nook-hd/general/how-to-updating-hd-hd-internal-emmc-to-t2863171).
Click to expand...
Click to collapse
I think I was able to get through the first step in loading cm 10...
Is it normal for cyanoboot to show up before the cyanogenmod flash??
If normal, I will try to upgrade to cm11. This is a huge improvement though Thanks!
PS. the update from CM10x to CM11 seems to be only for HD or HD+...would this work with NT?
PfanneKuchenAngriff said:
I think I was able to get through the first step in loading cm 10...
Is it normal for cyanoboot to show up before the cyanogenmod flash??
Click to expand...
Click to collapse
Yes
PS. the update from CM10x to CM11 seems to be only for HD or HD+...would this work with NT?
Click to expand...
Click to collapse
Sorry, the correct URL for the NT CM10.x to CM11 update is http://forum.xda-developers.com/showthread.php?t=2670589.
digixmax said:
Yes
Sorry, the correct URL for the NT CM10.x to CM11 update is http://forum.xda-developers.com/showthread.php?t=2670589.
Click to expand...
Click to collapse
Thanks so much for all your help! For this step do I upload the files straight into the device (not the SD card)? Also, do i use the flashable_CWM_6.0.4.5_chrmhoffmann.zip or could I use the 6.0.4.8?
PfanneKuchenAngriff said:
Thanks so much for all your help! For this step do I upload the files straight into the device (not the SD card)?
Click to expand...
Click to collapse
Either way would work.
Also, do i use the flashable_CWM_6.0.4.5_chrmhoffmann.zip or could I use the 6.0.4.8?
Click to expand...
Click to collapse
Your choice.
FWIW I am using 6.0.4.8 on my NT (running CM11 snapshot M12).
I followed this tutorial http://www.droidthunder.com/root-install-cwm-recovery-on-galaxy-tab-gt-p1000/#comment-84220 to Install CM 13 ROM on Samsung Galaxy Tab GT-P1000.
I succeffully rooted the device with z4root Android App
I then proceeded to install CWM recovery with Ondin. Although Ondin reports the procedure as Pass, the tablet went into boot loop. It cannot be turned off except for disconnecting the battery.
Is there a way out of this state? I can still put the tablet in Downloading mode.
Thanks for any help.
Try This
eross said:
I followed this tutorial http://www.droidthunder.com/root-install-cwm-recovery-on-galaxy-tab-gt-p1000/#comment-84220 to Install CM 13 ROM on Samsung Galaxy Tab GT-P1000.
I succeffully rooted the device with z4root Android App
I then proceeded to install CWM recovery with Ondin. Although Ondin reports the procedure as Pass, the tablet went into boot loop. It cannot be turned off except for disconnecting the battery.
Is there a way out of this state? I can still put the tablet in Downloading mode.
Thanks for any help.
Click to expand...
Click to collapse
Hi there,
Normally, when you pull the battery during download mode this will damage the device and you will not turn it on. But anyways can you confirm that you are able to boot the device into download mode.
Sincerely
KIBS2173
I managed to install an original ROM following Overcome guide (after the battery died I managed to put device in download mode and install)
I can now install CWM recovery without a problem. I can also root OK
But I cannot install the CW 13 ROM or any other ROM. I get an error that failed to mount system (invalid argument) and data (no such device) partitions (see attached pictures).
I tried wiping them with TWRP, change the FS back and forth - but all these things fail. It's as if the partitions are somehow locked or protected. Is there any way to fix that?
eross said:
i managed to install an original rom following overcome guide (after the battery died i managed to put device in download mode and install)
i can now install cwm recovery without a problem. I can also root ok
but i cannot install the cw 13 rom or any other rom. I get an error that failed to mount system (invalid argument) and data (no such device) partitions (see attached pictures).
I tried wiping them with twrp, change the fs back and forth - but all these things fail. It's as if the partitions are somehow locked or protected. Is there any way to fix that?
Click to expand...
Click to collapse
dont flash zips from external sd
DankMemz said:
dont flash zips from external sd
Click to expand...
Click to collapse
Thanks. How else to flash the zip?
eross said:
Thanks. How else to flash the zip?
Click to expand...
Click to collapse
Internal storage, that's why it didn't work
DankMemz said:
Internal storage, that's why it didn't work
Click to expand...
Click to collapse
I tried that too, same errors.
After the failed install only recovery boots. I have to reinstall original rom again.