Hi guys,
Just wondering if I can get root without unlocking the bootloader. Seems that I;m hearing that this isn't possible, which makes no sense. I know Verizon is Verizon when it comes to locking things down(They were even blocking free games on dumbphones back in the day so that you would have to buy them, even when the manufacturer included them for free), but it seems that gaining root access is completely different than flashing a new ROM. Am I correct here?
Also, would towelroot work for this phone? I know it's a nice simple solution, but I believe their claim is for phones manufactured before Jun '14.
Lastly, would a solution like Safestrap work here? It's what I used on my last phone (S3), when Verizon locked THAT down.
I know it is a battle fighting Verizon on this, and I know it takes time, I was just wondering if I am reading this right, or if I could root, but run the standard ROM, just with the extra access... Really, the phone is working so well that I just want better control for things like deleting/disabling/freezing stock apps and such.
Thanks for any help!! Sorry if this is in the wrong thread, seemed appropriate.
I am a user of H961N and it is also cannot be rooted.
I think root injection may be the answer.
http://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586
This is the related thread in G4 forum. I have tried this method. However, I have encountered a problem shown below during the process:
Code:
D:\V10\LG_Root>Send_Command.exe \\.\COM8
Author : blog.lvu.kr
SPECIAL COMMAND : ENTER, LEAVE
#dd if=/dev/block/mmcblk0p51 of=/data/media/0/system.img
FAIL
#ls
FAIL
#
It keeps returning "FAIL" to me no matter what command i enter. I have asked about this in the thread in G4 forum but no one answer me, sad
I think that you may try it and it may work, as the above problem may not due to the phone but my computer.
Where did you get you system.img file? if you are using the one from the g4 it will not work. The file needs to be rooted for your device and then injected.
ivangundampc said:
I am a user of H961N and it is also cannot be rooted.
I think root injection may be the answer.
http://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586
This is the related thread in G4 forum. I have tried this method. However, I have encountered a problem shown below during the process:
Code:
D:\V10\LG_Root>Send_Command.exe \\.\COM8
Author : blog.lvu.kr
SPECIAL COMMAND : ENTER, LEAVE
#dd if=/dev/block/mmcblk0p51 of=/data/media/0/system.img
FAIL
#ls
FAIL
#
It keeps returning "FAIL" to me no matter what command i enter. I have asked about this in the thread in G4 forum but no one answer me, sad
I think that you may try it and it may work, as the above problem may not due to the phone but my computer.
Click to expand...
Click to collapse
ivangundampc said:
I am a user of H961N and it is also cannot be rooted.
I think root injection may be the answer.
http://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586
This is the related thread in G4 forum. I have tried this method. However, I have encountered a problem shown below during the process:
It keeps returning "FAIL" to me no matter what command i enter. I have asked about this in the thread in G4 forum but no one answer me, sad
I think that you may try it and it may work, as the above problem may not due to the phone but my computer.
Click to expand...
Click to collapse
I'm curious, the 'Fail' just means that it fails to work, right? Phone works fine after that and all? No bricking or need to restore? If so, that's a safe risk. Thanks for the suggestion.
Mikey1969 said:
I'm curious, the 'Fail' just means that it fails to work, right? Phone works fine after that and all? No bricking or need to restore? If so, that's a safe risk. Thanks for the suggestion.
Click to expand...
Click to collapse
Yes, the phone is working fine after I have tried this. So it is a safe risk.
---------- Post added at 12:08 PM ---------- Previous post was at 12:06 PM ----------
spidey44 said:
Where did you get you system.img file? if you are using the one from the g4 it will not work. The file needs to be rooted for your device and then injected.
Click to expand...
Click to collapse
That's why I am trying to clone the system partition but it shows fail
Good luck with this but I have a feeling that unless someone has an exploit laying around, you'll need an unlocked bootloader.
Sent from my LG-H901 using Tapatalk
Should this be in the Q and A sections as this is not development?
Don't have an LG v10 yet, but found this:
www.droidviews.com/how-to-root-lg-v10-with-supersu-v2-56/
Thought I'll share if someone would like to give this a shot.
(try at your own risk, that's all I can write to that, since i can't try myself.)
Thanks for this.....but i was reading that article...it says you root it by flashing the superuser zip in TWRP recovery....um....you cannot flash custom recovery without root....or am i missing something. Im not bashing you for posting the article. I thank you very much for posting it! More like questioning the articles validity.
in99flames said:
Thanks for this.....but i was reading that article...it says you root it by flashing the superuser zip in TWRP recovery....um....you cannot flash custom recovery without root....or am i missing something. Im not bashing you for posting the article. I thank you very much for posting it! More like questioning the articles validity.
Click to expand...
Click to collapse
you need an unlocked bootloader
http://www.droidviews.com/how-to-unlock-bootloader-on-lg-v10/
and adb & fastboot tool, not root
To install a custom recovery
http://www.droidviews.com/how-to-install-twrp-recovery-on-lg-v10-h901/
That's how I usually would do it, the way it's described in the articles, since I still have to get my v10 from Far East can't test it.
And don't worry, I don't feel like you are bashing.
Life's too short to take anything too personal.
Awesome thank you for clearing that up!! I was totally confused for a second there.
GerManiac said:
you need an unlocked bootloader
http://www.droidviews.com/how-to-unlock-bootloader-on-lg-v10/
and adb & fastboot tool, not root
To install a custom recovery
http://www.droidviews.com/how-to-install-twrp-recovery-on-lg-v10-h901/
That's how I usually would do it, the way it's described in the articles, since I still have to get my v10 from Far East can't test it.
And don't worry, I don't feel like you are bashing.
Life's too short to take anything too personal.
Click to expand...
Click to collapse
What you've mention is only working for tmobile V10, since it's bootloader can be easily unlocked while the other are not.
ivangundampc said:
What you've mention is only working for tmobile V10, since it's bootloader can be easily unlocked while the other are not.
Click to expand...
Click to collapse
Thanks for clearing that up. Didn't know that and didn't see that on the article.
Cheers
I think if LG release a genuine ROM file, we could replace recovery parition with rooted one and flash it to our phone, that the only way open but LG hasn't released any ROM file yet.
phillymade said:
Should this be in the Q and A sections as this is not development?
Click to expand...
Click to collapse
Sorry, wasn't sure, as I was asking about development.... Sometimes this is like a scene form the movie Big Trouble... At the airport, "Arrivals or Departures"? "Well, we're arriving at the airport, but then we're going to be departing.".
Related
Hi All,
I am a newbie...I would appreciate if someone could help me.
I am planning to root my phone using following,
http://forum.xda-developers.com/showthread.php?t=1309293&page=3
If I use that root can I use following to unlock?
http://forum.xda-developers.com/showthread.php?t=1289395
much appreciate your help
Rooting and unlocking the phone will not conflict. You can do both.
If you try the rooting method you posted, assuming you are still straight stock, it will not work for you. I suggest you either use the rooting method in the sticky post in the general forum, or if you are concerned about incrementing the flash counter, use the stock + root method posted by Entropy512. See the Guide "How to flash custom binaries..." linked in my signature for that.
creepyncrawly...
what are the disadvantages of incrementing the flash counter? I would like to follow an easy method since I am new to this whole thing....used to be iphone customer for long.
appreciate your help.
There is quite a bit of information in the discussion portion of the first two guides. Some people are very cautious about possibly having their warranty voided, since in the agreement with the carrier, flashing custom binaries voids the warranty. On the other hand, many people are very cavalier about it, even returning their phones with custom software still installed. I have not seen anyone post that they actually had their warranty denied. I have been reading both the captivate forums and these forums for about a year and a half.
creepyncrawly said:
There is quite a bit of information in the discussion portion of the first two guides. Some people are very cautious about possibly having their warranty voided, since in the agreement with the carrier, flashing custom binaries voids the warranty. On the other hand, many people are very cavalier about it, even returning their phones with custom software still installed. I have not seen anyone post that they actually had their warranty denied. I have been reading both the captivate forums and these forums for about a year and a half.
Click to expand...
Click to collapse
Thanks. So could I use the second method of not increasing the counter and use the kernel from this below?
http://forum.xda-developers.com/showthread.php?t=1309293
Thanks in advance
Thanks I successfully rooted without increasing flash counter and also flashed the CWM....Yeeee....first timer here so happy. Now I have to unlock but I am really scared it will mess things up. Creepy could you please let me know if I could use the unlock method I mentioned will work?
Thanks.
woow14610 said:
Thanks I successfully rooted without increasing flash counter and also flashed the CWM....Yeeee....first timer here so happy. Now I have to unlock but I am really scared it will mess things up. Creepy could you please let me know if I could use the unlock method I mentioned will work?
Thanks.
Click to expand...
Click to collapse
Congrats on rooting, that method in your post works for unlocking. On step 2, just remember to wait. Your phone will be unlocked after it reboots. So if it says the application is not responding, click "wait"
HTC Chris said:
Congrats on rooting, that method in your post works for unlocking. On step 2, just remember to wait. Your phone will be unlocked after it reboots. So if it says the application is not responding, click "wait"
Click to expand...
Click to collapse
Thanks all....
I did unlock it and also....flashed the unnammed. Very cool. I read everything like 5 times and followed everything to a letter.
Only difference was in the Android SDK...adb.exe is not in the tools anymore it is moved to platform-tools. That is where now you have to copy the zImage as the commands in the instruction assumes that adb is in the same dir.
Thanks.
woow14610 said:
Thanks all....
I did unlock it and also....flashed the unnammed. Very cool. I read everything like 5 times and followed everything to a letter.
Only difference was in the Android SDK...adb.exe is not in the tools anymore it is moved to platform-tools. That is where now you have to copy the zImage as the commands in the instruction assumes that adb is in the same dir.
Thanks.
Click to expand...
Click to collapse
Changed the wording in the Guide to make it clear. Thanks.
For unlock codes visit:
Why would anybody pay for an S2 unlock code when you can install a program from the Market for free?
'cuz they don't know free tool is avail., i guess.
Well if you google unlock s2 to find one of the various unlock code websites, you should see the app as well. its actually the first result. hope nobody pays for a code
If I'm not mistaken, you're not allowed to advertise for paid services in these forums. There's a marketplace on here I think for this.
Just scouring the forums to see if there is any help available with my issue. I have a Verizon Galaxy s4 ME7 SCH-1545. Some of those identifiers are I believe redundant, nevertheless, I dont think I put all needed info about the phone in that description, because I dont know whats needed and what isnt. That being said, I will explain any details missing to anyone that can help. Im looking to root my phone, yes i'm aware of the void, and yes im aware of the brick risk. Like I mentioned earlier, I have the ME7 update(took it before I knew it was detrimental to not take it), and would like to root my device. I have tried the method on the XDA forums several times(the one that just came out recently) to no avail. I also tried the motochopper method. Nothing. The only progress i made was that now when i boot my phone, it says "Samsung" underneath that it says "custom" and then has an unlocked lock. but when I run the terminal app as directed by the dev who came up with the root for the ME7 update, im stuck on the ./pwn portion.....it says (permission denied). Now, also on these forums it mentions to ignore the permission denied and to continue the steps, well I do that too, and everytime I try and open the SU app(whether it be from the inherent SU app or another marketplace one) it always says that i do not have root....yet on startup, the custom screen is displayed...Im at a loss and so is probably anyone trying to follow along with the course of events i described. Like I said, obviously if more info is needed to diagnose the issue, I will provide it immediately. just because I didnt disclose it here doesnt mean I forgot, just that Im a noob and didnt know to disclose it. Any help with this issue would be much appreciated. Oh, and I assume based on all the other forums, that flashing a ROM with this OTA ME7 update is out of the question....let me know if I'm wrong. Thanks again for your time. Semper Fi.
mdpatterson said:
Just scouring the forums to see if there is any help available with my issue. I have a Verizon Galaxy s4 ME7 SCH-1545. Some of those identifiers are I believe redundant, nevertheless, I dont think I put all needed info about the phone in that description, because I dont know whats needed and what isnt. That being said, I will explain any details missing to anyone that can help. Im looking to root my phone, yes i'm aware of the void, and yes im aware of the brick risk. Like I mentioned earlier, I have the ME7 update(took it before I knew it was detrimental to not take it), and would like to root my device. I have tried the method on the XDA forums several times(the one that just came out recently) to no avail. I also tried the motochopper method. Nothing. The only progress i made was that now when i boot my phone, it says "Samsung" underneath that it says "custom" and then has an unlocked lock. but when I run the terminal app as directed by the dev who came up with the root for the ME7 update, im stuck on the ./pwn portion.....it says (permission denied). Now, also on these forums it mentions to ignore the permission denied and to continue the steps, well I do that too, and everytime I try and open the SU app(whether it be from the inherent SU app or another marketplace one) it always says that i do not have root....yet on startup, the custom screen is displayed...Im at a loss and so is probably anyone trying to follow along with the course of events i described. Like I said, obviously if more info is needed to diagnose the issue, I will provide it immediately. just because I didnt disclose it here doesnt mean I forgot, just that Im a noob and didnt know to disclose it. Any help with this issue would be much appreciated. Oh, and I assume based on all the other forums, that flashing a ROM with this OTA ME7 update is out of the question....let me know if I'm wrong. Thanks again for your time. Semper Fi.
Click to expand...
Click to collapse
Wrong. Once you have root you can use Safestrap to flash roms. So far no ASOP roms but some really nice TW ones like Hyperdrive are available. Lots of info & help in the Verizon S4 forums. Safestrap for the ME7 is by developer Hashcode and has been working quite well.
Sent from my Hyperdriven Dev Edition Vzw SCH-I545 with KT kernel using Tapatalk 4
RootingS4
This video by mcskittle3232 on you tube will let you do the root successfully .I did it in 1st go.NEW TO ROOTING
GastroGuy said:
This video by mcskittle3232 on you tube will let you do the root successfully .I did it in 1st go.NEW TO ROOTING
Click to expand...
Click to collapse
I dont think your link worked
mdpatterson said:
I dont think your link worked
Click to expand...
Click to collapse
Here is a link to the video I used. Hope this helps. http://m.youtube.com/watch?v=eAEmZTkykTE
Sent from my SCH-I545 using xda app-developers app
Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Trying to root Nougat (Android 7)? Then read the comments at the bottom please...
I will first state I do NOT own a Moto G4, I own the G3 and the X Pure which are both 3rd Gen devices, but I was requested to write this tutorial by a few users here due to lots of failed root attempts using older "standard" methods that do not work on this device. I also do not like the "one click" root methods, because they can and do fail (KingoRoot will brick a Moto G3/4, regardless of what it's web page says), and when they do people have no idea how to fix it. The manual way is not difficult, and it teaches you how to work on, fix, and use your device on a level above that of the average smartphone user.
I will only cover rooting, the prerequisites are covered elsewhere in detail and I will link to reliable sources for the information. Specifics of the prerequisites are outside of the scope of this tutorial, but are open for discussion in this thread. Remember, I do not own this device although the methods used are the same as similar devices.
Prerequisites:
0) Be running Marshmallow (Android 6.x) stock ROM, at this time Nougat (Android 7.x) is not working via any method.
1) Device must have an unlocked bootloader. See Moto - Unlocking the Bootloader for more info.
NOTE: As of 7/18/2016, Amazon ad-subsidised Moto G 4th Gen devices cannot be bootloader unlocked, therefore they cannot be rooted. Sorry, Lollipop and newer Android security changes pretty much put an end to that.
2) You need to have TWRP installed or one-time booted via fastboot. CWM and other recoveries will NOT work at this time. See TWRP's Moto G 2016 page
3) You need a copy of the latest stable SuperSU ZIP from Chainfire's site on the internal storage or SD card of your device. SR1-SuperSU-v2.78-SR1-20160915123031.zip is the lastest version verified to work with this method.
Note: Do NOT use any 2.77 version, it was a beta intended specifically for the SG Note 7 and will not work, it does not harm but fails to root.
4) Reboot and start TWRP recovery, and PERFORM A COMPLETE BACKUP IN TWRP (Nandroid)!!!
How to do it:
Now, the procedure is the same whether you are trying to root the first time, or you did it the old way just flashing SuperSU and are now not able to boot...
In TWRP, go to Advanced and open the Terminal, in the terminal type this EXACTLY as shown:
Code:
echo SYSTEMLESS=true>>/data/.supersu
Now press enter (there is no confirmation returned), then exit and press the Home key. Go to Install and select the SuperSU zip file you downloaded from Prerequisite #3 and swipe to flash it and reboot. No need to clear caches or anything else but you are welcome to if you wish. You can install SuperSU updates normally through the app going forward (as of this posting).
Why do I have to do this???
For whatever reason, the install script for SuperSU does not recognize that this device (like many others) requires a systemless root installation. By creating /data/.supersu in the TWRP recovery environment, the SuperSU install script parses the file and sees "SYSTEMLESS=true" and ignores what it auto-detects and forces a systemless root installation.
Hope this is helpful to someone!
As always, if this is the first time you have booted TWRP or attempted root... BACKUP IN TWRP FIRST!!! Once the system is modified, it cannot be undone (easily) and you will always have a known good starting place if the worst happens.
EDIT: Photos added showing what a proper command and flash should look like. Note that in picture 1 the exit command is not needed, you can just back out. In pictures 2 and 3 a proper flash of SuperSU is shown, note that system-less mode is specified and the boot image is patched, this is what should occur. It is normal for it to loop once or twice, but that is it, first boot could take 10 minutes plus.
Notes on Nougat/Android 7... At this time this method of rooting does not work properly on the official Nougat ROM for this device, it causes WiFi issues and interface problems (settings crashes, etc) and with no complete factory image there is no work fix other than to restore your Nandroid backup to pre-root status. If you wish to play with this method and try it, your on your own, I will try to assist but as I stated earlier I do not own this device. To my knowledge as of this posting, there is no working root on stock Android 7 on this device.
I can confirm this worked on my formerly-amazon XT1625 16GB G4. You will get an error about not being able to mount /data, but it proceeds and works anyway.
This is exactly what was missing! I rooted as normal with the latest SuperSU expecting it to just work like on other phones/tablets, but yeah. Before specifying systemless, it hung on boot. After following your instructions it booted right up. Thanks!
Also if you setup adaptable storage with your SDcard, so it works like internal storage, TWRP can't find any files on the SDcard. You will need to revert to non-adaptable storage for TWRP to find the supersu ZIP file.
And make sure you're using the latest SuperSU-- I accidentally tried a very old version which did not work!
Scared Noobie
I should probably be posting this on some noobie forum, but I read Motorola's "Unlock Your Bootloader" and it scared the **** out of me. Can someone give me a ballpark figure of the chances of bricking the phone? (I know this particular phone is new, but I'm just looking for a rough estimate. How common is it generally to brick a phone just from unlocking the bootloader?)
Appreciate this. I miss the old days where it was all simple. Everything was flashable. Never had to flash back to something or re flash.
cuvtixo said:
I should probably be posting this on some noobie forum, but I read Motorola's "Unlock Your Bootloader" and it scared the **** out of me. Can someone give me a ballpark figure of the chances of bricking the phone? (I know this particular phone is new, but I'm just looking for a rough estimate. How common is it generally to brick a phone just from unlocking the bootloader?)
Click to expand...
Click to collapse
It's about as common as bring bricked from performing a factory reset, because that is the only part that really does much... So extremely rare, but the possibility is always there. Remember to have patience, the resets and wipes can take what seems like forever.
The dangerous part is what you do after the bootloader is unlocked.
Sent from my MotoG3 using Tapatalk
cuvtixo said:
I should probably be posting this on some noobie forum, but I read Motorola's "Unlock Your Bootloader" and it scared the **** out of me. Can someone give me a ballpark figure of the chances of bricking the phone? (I know this particular phone is new, but I'm just looking for a rough estimate. How common is it generally to brick a phone just from unlocking the bootloader?)
Click to expand...
Click to collapse
Very rare...all you need is read, read, read and follow the instructions. Good luck
Very nice and just what I needed. Worked perfectly on my Amazon Moto G4 with ads. I got no errors or messages but booted fine-got caught in a boot loop once as the SuperSU file explains after it installs. Boots in less then a minute first time.
Marty
acejavelin said:
It's about as common as bring bricked from performing a factory reset, because that is the only part that really does much... So extremely rare, but the possibility is always there. Remember to have patience, the resets and wipes can take what seems like forever.
The dangerous part is what you do after the bootloader is unlocked.
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Hey i wiped this up based on your post it should really help. it completely automates the process check it out if you want to and you can also ad it to the OP if you want to.
DOWNLOAD TOOL HERE Root-moto-g-4th-gen
Tomsgt said:
Hey i wiped this up based on your post it should really help. it completely automates the process check it out if you want to and you can also ad it to the OP if you want to.
DOWNLOAD TOOL HERE Root-moto-g-4th-gen
Click to expand...
Click to collapse
cheers mate
I signed up for xda just to give you props! I rooted my phone using instructions not from here and i was suck in a boot loop. your little command there fixed it! I freakin love you.. wish i could buy you dinner! Thanks a million
zipjay said:
I signed up for xda just to give you props! I rooted my phone using instructions not from here and i was suck in a boot loop. your little command there fixed it! I freakin love you.. wish i could buy you dinner! Thanks a million
Click to expand...
Click to collapse
Your welcome... Just give click thanks on the first post, but if you feel absolutely compelled to buy me dinner, there is the Donate button.
Sent from my MotoG3 using Tapatalk
I rooted my G4 in the normal way using supersu 2.46, and now boot hangs on the white Moto screen. (advice from another site)
I am waiting for a SD card to update to 2.76 with the systemless command.
Is there anything else I can do in the interim, I tried deleting the contents of /supersu from Twrp and that hasnt made any difference. I have also wiped data and caches.
thanks .. Mike
mikeruss said:
I rooted my G4 in the normal way using supersu 2.46, and now boot hangs on the white Moto screen. (advice from another site)
I am waiting for a SD card to update to 2.76 with the systemless command.
Is there anything else I can do in the interim, I tried deleting the contents of /supersu from Twrp and that hasnt made any difference. I have also wiped data and caches.
thanks .. Mike
Click to expand...
Click to collapse
Can't you just use MTP mode of TWRP to copy the latest SuperSU to internal storage then flash after creating the config file?
Sent from my MotoG3 using Tapatalk
thank you, worked fine.
would I be right in thinking I need the sdk23, arm, 64 bit version of xposed ?
mikeruss said:
thank you, worked fine.
would I be right in thinking I need the sdk23, arm, 64 bit version of xposed ?
Click to expand...
Click to collapse
I don't know... I don't own the G4 *yet* but possibly in the near future now that I know the Amazon version can have the ads striped out easily enough... I would do a nandorid and try it, if it fails, restore and use the 32-bit version.
Someone else may have a better answer for you.
acejavelin said:
I don't know... I don't own the G4 *yet* but possibly in the near future now that I know the Amazon version can have the ads striped out easily enough... I would do a nandorid and try it, if it fails, restore and use the 32-bit version.
Someone else may have a better answer for you.
Click to expand...
Click to collapse
32 bit
Sent from my Moto G (4) using Tapatalk
thanks, xposed works fine
Well, I was planning on joining all of you with your Moto G4's soon, or possibly the G4 Plus... but since the Amazon version can't be unlocked anymore I got cold feet, and today Best Buy was running a special on the Moto X Pure 32GB edition for $249 (My Best Buy Elite members only), I pulled the trigger on that one instead. No change in helping though, I didn't have the device to begin with so I will continue to assist with this thread as I can.
I know this isn't the correct forum but I've searched and haven't found anything and since this seems to be the closet device I was wondering if there is any development for this device yet or any rooting methods that may work
I looked as well. There does not seem to be any serious develop on the V530. I'm bootloader unlocked but no root or twrp that I could find.
Mike02z said:
I looked as well. There does not seem to be any serious develop on the V530. I'm bootloader unlocked but no root or twrp that I could find.
Click to expand...
Click to collapse
Thanks. I couldn't even get that far. Don't get me wrong it's a nice device but I'm sure a custom ROM would make it fly. Hopefully soon as more people get the device we'll see some development.
First thing first. Bootloader commands must be there.
If so, you just need TWRP
I'd also be very interested in rooting/custom rom for this device, as I moved to it from my Nexus 7 2013 that was very much showing it's age. It's almost painful being on a stock rom from a 3rd party at this point. I've searched through google and nobody seems to be taking much interest in this device. The same was true for the original xperia z tablet and it's got official lineageos support, so I remain hopeful.
love this thing
I would just love to root this beast. New to LG products, not new to rooting. Can anyone point me in the right direction on where to start?
Did you root t
widto08 said:
I would just love to root this beast. New to LG products, not new to rooting. Can anyone point me in the right direction on where to start?
Click to expand...
Click to collapse
Did you ever get this tablet rooted.. I. Can't find any information about this device online it's like it they never made it
Saint$1t said:
Did you ever get this tablet rooted.. I. Can't find any information about this device online it's like it they never made it
Click to expand...
Click to collapse
I am having problems even booting into bootloader on this thing. I was able to boot into recovery mode but can't get out of the "no commands".
adb reboot recovery
adb reboot bootloader -> just reboots it.
It might be possible to use dirtyc0w exploit to get root access on this tablet.(nvm it seems our android version is already patched for that. )
I too have been able to get the bootloader unlocked but unable to find a version of TWRP or find any rooting tool that supports this device. Still holding out hope but this doesn't seem to be a super popular device :/
Hey guys! I bricked my tab and i need a stock kdz or system, recovery and boot.imgs! Does anyone have or can pull these file for me thanks in advance!
Sent from my [device_name] using XDA-Developers Legacy app
I have rooted mine..if I had the stock system.img could you used that? This is what I did to obtain root..
Download the Lg download utility mode tool '''https://github.com/Lekensteyn/lglaf''
and the sources ''https://pycryptodome.readthedocs.io/en/latest/src/installation.html'
Then open cmd in the folder and execute: python lglaf.py --debug --rawshell --cr -c '!S sh' <--- there might be an error message or laf_acess_denied but its okay.
re-enter the command: python lglaf.py --debug --rawshell <--- this should open up an interactive shell..enter ls and see if it lists the files on the device then close the interactive shell
run python extract-partitions.py to get the stock boot.bin but change the file extension to .img
push the boot.img to the device, install magisk manager, patch the boot.img, pull img then flash with fastboot
Nice! We finally get root a couple days after a seemingly innocent fall off my bed wrecked my screen :crying:. Deciding on replacing it or getting a MediaPad M5.
tbh I've rooted this device since last month or so but I really didn't have time to make a tutorial
Is anyone able to pull there kdz? My tab is bricked and ive tried LG bridge and all others! Or the the imgs in need to go back to stock! Any help please! Thanks!
Sent from my [device_name] using XDA-Developers Legacy app
Vincent_vann said:
tbh I've rooted this device since last month or so but I really didn't have time to make a tutorial
Click to expand...
Click to collapse
I followed your comment and was able to root. May I use your process to make a tutorial? I will give you credit
---------- Post added at 05:42 PM ---------- Previous post was at 05:33 PM ----------
Thanks to Vincent_vann I have root. With this I can finally start building a custom TWRP for this tablet. I wish we had a forum for this device. I requested one last year but it still hasn't been made even though it was approved. If I get one built, and there isn't a dedicated forum, I'll post it in this thread.
Just built TWRP. I noticed some folks asking for stock recovery, boot, and system img files. I have recovery and boot img. Not sure where to post these though. Same with twrp. If someone has any reccomendations on how to go about this I'll gladly provide.
I have the Canadian variant (v533) and wouldn't mind giving TWRP a whirl on it. All specs are same so I think it'll work. Don't mind testing if you do get somewhere to post TWRP. Also good job on getting it compiled ?
Jambii1987 said:
I have the Canadian variant (v533) and wouldn't mind giving TWRP a whirl on it. All specs are same so I think it'll work. Don't mind testing if you do get somewhere to post TWRP. Also good job on getting it compiled ?
Click to expand...
Click to collapse
Thank you! Unfortunately with nougat file based encryption TWRP has issues with decrypting /data after the setup of the tablet. So it's working 50% which is annoying because you'll have to wipe data whenever you want to flash something. Not a big deal for roms, but very inconvenient for other zips. If you still want it let me know and I'll find a place. Else I'll be tackling the decryption issue this weekend.
xnukemx47 said:
Thank you! Unfortunately with nougat file based encryption TWRP has issues with decrypting /data after the setup of the tablet. So it's working 50% which is annoying because you'll have to wipe data whenever you want to flash something. Not a big deal for roms, but very inconvenient for other zips. If you still want it let me know and I'll find a place. Else I'll be tackling the decryption issue this weekend.
Click to expand...
Click to collapse
I think I'll wait until you try getting decryption working. I have a had many fights with that beast lol
Jambii1987 said:
I think I'll wait until you try getting decryption working. I have a had many fights with that beast lol
Click to expand...
Click to collapse
Have any good resources you can recommend?
Hi,
I tried to upgrade my US998 from Oreo to Pie using LGUP patched. The upgrade process went well until the phone restarted and have this error message:
"Your device has failed a routine safety check and will not boot..."
I did try using LG Bridge to fix = not working
I did try fastboot boot laf.img (using extracted laf from H93031a_00_OPEN_EU_OP_1105) not working.
Any other solution?
Thanks
This Post got recommended to me. I am a Samsung user so my answer will probably be very stupid.
If you have fastboot, why don't you flash a recovery and a custom rom? Ik stupid but it's the only thing that comes to my mind since i don't have a LG phone lol
JanBoyGamer23 said:
This Post got recommended to me. I am a Samsung user so my answer will probably be very stupid.
If you have fastboot, why don't you flash a recovery and a custom rom? Ik stupid but it's the only thing that comes to my mind since i don't have a LG phone lol
Click to expand...
Click to collapse
Installing TWRP or any recovery wont work for me. The bootloader still locked thou.
jaacoozee said:
Installing TWRP or any recovery wont work for me. The bootloader still locked thou.
Click to expand...
Click to collapse
Is that "Download mode" the same as the Samsung one? How do you NORMALLY access it?
JanBoyGamer23 said:
Is that "Download mode" the same as the Samsung one? How do you NORMALLY access it?
Click to expand...
Click to collapse
I'm not sure. Normally I access download mode using volume up and power button. The download mode was there for a sec and then the screen back to
"Your device has failed a routine safety check and will not boot..."
again.
Ah ok so now I understand.
But why don't you unlock your bootloader then if fastboot works? Do you know for sure that TWRP doesn't work?
I really want to help but I don't have a LG phone
JanBoyGamer23 said:
Ah ok so now I understand.
But why don't you unlock your bootloader then if fastboot works? Do you know for sure that TWRP doesn't work?
I really want to help but I don't have a LG phone
Click to expand...
Click to collapse
EDIT: The LG Bootloader unlocking page is "under construction". Guess you have to bring your phone to LG for them to fix this...
JanBoyGamer23 said:
EDIT: The LG Bootloader unlocking page is "under construction". Guess you have to bring your phone to LG for them to fix this...
Click to expand...
Click to collapse
Unfortunately my LG V30 is US region. The official bootloader site not support my phone. Thanks for your info anyway
I'm not sure why a Samsung user was recommended this post. And no offense to the Samsung user, but the process for unlocking, etc is VERY different for Samsung than it is for LG... so I recommend not worrying about that. Believe me, I know, because I'm researching switching to a Samsung in the future, and the process is very different!
That being said, the best resource here is the WTF thread with the post by ChazzMatt. That post has everything you need in one place.
jacoozie, the error you're getting indicates that you had a non-stock phone when you flashed the KDZ on an unlocked phone. For this reason, it's no surprise you got this error - the phone must be COMPLETELY STOCK for a stock KDZ flash. I'm guessing you had TWRP or something else installed, which is causing this problem. Once you unlock, you cannot just flash things willy nilly... and generally you don't flash with KDZ unless you're trying to change models (aka Frankenstein) or on the way to a custom ROM.
It sounds like you've done some unlocking rooting... if so, I recommend you start over with the WTF thread, read it VERY CAREFULLY and ENTIRELY and then reflash as instructed there. I'm guessing you may need to go back to KDZ Nougat and then work your way forward. If you have questions, ask in that thread... but you shouldn't have any questions as the thread is VERY complete (been updated all the time with very detailed information, so everything is in there).
schwinn8 said:
I'm not sure why a Samsung user was recommended this post. And no offense to the Samsung user, but the process for unlocking, etc is VERY different for Samsung than it is for LG... so I recommend not worrying about that. Believe me, I know, because I'm researching switching to a Samsung in the future, and the process is very different!
That being said, the best resource here is the WTF thread with the post by ChazzMatt. That post has everything you need in one place.
jacoozie, the error you're getting indicates that you had a non-stock phone when you flashed the KDZ on an unlocked phone. For this reason, it's no surprise you got this error - the phone must be COMPLETELY STOCK for a stock KDZ flash. I'm guessing you had TWRP or something else installed, which is causing this problem. Once you unlock, you cannot just flash things willy nilly... and generally you don't flash with KDZ unless you're trying to change models (aka Frankenstein) or on the way to a custom ROM.
It sounds like you've done some unlocking rooting... if so, I recommend you start over with the WTF thread, read it VERY CAREFULLY and ENTIRELY and then reflash as instructed there. I'm guessing you may need to go back to KDZ Nougat and then work your way forward. If you have questions, ask in that thread... but you shouldn't have any questions as the thread is VERY complete (been updated all the time with very detailed information, so everything is in there).
Click to expand...
Click to collapse
Thanks for the reply.
I didnt install TWRP or any recovery tools to my phone. My phone bootloader still locked thou.
I have read the WTF thread but the problem is I cant get into my Download mode.
Ok, what steps are you using to try to get into download mode? Presumably turning off the phone, then holding the volume up button and plugging in the USB cable (other end already connected to a Windows computer), correct? If that doesn't work, can you try other USB cables? Sometimes a bad cable could prevent the phone from going into download mode.