Hi,
Im going to enable wifi calling on my s6 edge.
As fas as i found i have to upload EVR firmware.
I can't find any ware G925FXXU3COI9 with EVR but i found this:
DateCountry/Carrier/Version/PDA/CSC/Kies
2015-11-09/United Kingdom (EE)/5.1.1/G925FXXU3QOJF/G925FEVR3QOJF/YES
2015-11-09/United Kingdom (EE)/5.1.1/G925FXXU2QOI4/G925FEVR2QOI1/NO
My question is can i upload one of two above to my s6 egde ? Or shuld i looking for exaclty same build number ?
You will get a write fail message on Odin flashing the EVR firmware. If you look at the Wifi Calling thread basically the process is to go into download mode in Smart Sync - and use the serial number from an EE phone to get it to flash your phone with EE firmware.
Thx for replay,
I found on many forums where people change firmware from btu to other.
How other does ?
Did they found exactly same build number with EVR version ?
Is any body can share on pm serial number from EE network for s6 edge sm-925f ?
Best regars
You were right,
error on finish.
lynxblaine said:
You will get a write fail message on Odin flashing the EVR firmware. If you look at the Wifi Calling thread basically the process is to go into download mode in Smart Sync - and use the serial number from an EE phone to get it to flash your phone with EE firmware.
Click to expand...
Click to collapse
Smart Sync or Smart Switch ??
Smart switch on PC I mean.
Related
in app PHONE info my CSC is blank, 6.0.1 XEU , is any problem ? phone work good but secret code non working (sample *#1234#) i flashed with odin from 5.1.1 EVR to 6.0.1 XEU , in the future i will receive OTA or smart switch update or not? regards
Did you find a solution?
hey guys , i just bought a s6 edge used , G925F , with matched imei box , it had lollipop firmware on it , 5.1 , and it worked perfectly with all networks in my country (pakistan) , now that i upgraded it to marshmallow with BTU firmware (G925FXXU3DPBG/BTU ) , it has stopped registering on any network , it can detect all networks , IMEI is intact and not changed a bit , but is constantly on emergency calls only , i tried reflashing ,resetting , and setting it on only 2G mode , but nothing worked , any idea how to make it work ?
Note : My country is pakistan and the firmware i flashed along with csc and cp and Ap is of BTU region , does that make a difference ?
dukesx said:
hey guys , i just bought a s6 edge used , G925F , with matched imei box , it had lollipop firmware on it , 5.1 , and it worked perfectly with all networks in my country (pakistan) , now that i upgraded it to marshmallow with BTU firmware (G925FXXU3DPBG/BTU ) , it has stopped registering on any network , it can detect all networks , IMEI is intact and not changed a bit , but is constantly on emergency calls only , i tried reflashing ,resetting , and setting it on only 2G mode , but nothing worked , any idea how to make it work ?
Note : My country is pakistan and the firmware i flashed along with csc and cp and Ap is of BTU region , does that make a difference ?
Click to expand...
Click to collapse
Use samsung Smart Swtich Mate! To restore It To Factory Default give it a try ur device may get fixed Best Of luck
@osman34 why use smart switch ? it is used for transferring data right ? how can it help in mobile network issue ?
dukesx said:
@osman34 why use smart switch ? it is used for transferring data right ? how can it help in mobile network issue ?
Click to expand...
Click to collapse
nope bro ur whole life was lie
u didnt know about smart swtich there is feature that downloads frimware from samsung and restores it
like itunes
it fixes most of issues with phones
Look up on google about restore with smart switch
@osman34 keeping in mind , that all networks are detected fine , but registration is an issue , it is a firmware defect ? oh and did i mention ? my nano sim isnt even detectable on any old Samsung or even Nokia device , Edge detects it but doesnt register -__-
Use smart switch emergency recovery.
You sure you used the right firmware? Didn't put 925f firmware on a 925i or something?
@lynxblaine my device doesnt appear in emergency recovery list , now ?
Have you put your phone into download mode?
@lynxblaine yes, even then wait , do you mean device intialization ?
You may have to do device initialisation in smart switch.
@lynxblaine is it a baseband issue ? because i dont remember which firmware it was on but it was lollipop 5.1 , and i updated it to UK firmware marshmallow as i mentioned in link , and now its useless ! Lol
Is it a baseband issue ?
http://www.galaxynote5update.com/un...sung-galaxy-note5-to-original-stock-firmware/
try this then if it doesn't work.
Follow this guide. Maybe give us the info from saminfo app from the app store to help us determine the model you have.
hello guys i'm relay confused i bought s6 edge was working good making calls .. but the problem is the os is 5.01 too old . so i downloaded 7.0 os from sammobile .
i tired to flashed it with Odin but all the time i get fail message :crying:
after the flash field and when i log in to download mode the model number now is sm-g925x a live demo unit .
i found some help reading Threads here and i found a ORIGINAL STOCK ANDROID 5.1.1 LDU FIRMWARE . i want to flash it with odin .
my question is can I make calls and use mobile data after flashing this ORIGINAL FIRMWARE.
i have the phone imei and SR number and the phone is from UK
NEW
I FLASHED THIS STOCK FIRMWARE 5.1.1 https://forum.xda-developers.com/showpost.php?p=63762911&postcount=104
AND I STILL CAN MAKE CALLS AND USE MOBILE DATA
I THOUGHT YOU CANNOT WITH LIVE DEMO UNIT
CAN I FLASH A NEW OS LIKE 7.00 WITH ODIN
salamona said:
hello guys i'm relay confused i bought s6 edge was working good making calls .. but the problem is the os is 5.01 too old . so i downloaded 7.0 os from sammobile .
i tired to flashed it with Odin but all the time i get fail message :crying:
after the flash field and when i log in to download mode the model number now is sm-g925x a live demo unit .
i found some help reading Threads here and i found a ORIGINAL STOCK ANDROID 5.1.1 LDU FIRMWARE . i want to flash it with odin .
my question is can I make calls and use mobile data after flashing this ORIGINAL FIRMWARE.
i have the phone imei and SR number and the phone is from UK
NEW
I FLASHED THIS STOCK FIRMWARE 5.1.1 https://forum.xda-developers.com/showpost.php?p=63762911&postcount=104
AND I STILL CAN MAKE CALLS AND USE MOBILE DATA
I THOUGHT YOU CANNOT WITH LIVE DEMO UNIT
CAN I FLASH A NEW OS LIKE 7.00 WITH ODIN
Click to expand...
Click to collapse
Why are you flashing firmware for an LDU? Is your s6 an LDU? If not then don't flash them....
Search your model number in www.updato.com to find the correct firmwares.
callumbr1 said:
Why are you flashing firmware for an LDU? Is your s6 an LDU? If not then don't flash them....
Search your model number in www.updato.com to find the correct firmwares.
Click to expand...
Click to collapse
I TRIED A LOT OF SM-G925F firmware BUT I KEEP GETTING FAIL IN ODIN AND WHEN I'M IN DOWNLOAD MODE I SEE MY PHONE MODEL SM-G925X AND IN THE SAMSUNG LOGO THERE IS LIVE DEMO UNITE . I FLASHED THE LDU firmware AND IM NOW WITH ANDROID 5.1.1
MY Q IS CAN I FLASH ANY SM-G925F firmware AND ANY ROOM IF THERE IS BE ONE . AND CAN STILL MAKE CALLS . I HEARD LDU YOU CAN NOT USE SIM SLOT WHEN YOU CHANGE THE FIRST firmware
Hi,
I'm able to flash the Canadian A52 5G SM-526W with the stock firmware successfully using Odin both the complete firmware and just the CSC.
I tried to flash with SM-A526B, SM-A525M, SM-A525F unsuccessfully, it fails every time for the complete firmware or just the CSC.
Can anyone direct me to which firmware I can flash to this phone to activate the built in call recorder?
Thanks!
Indian/INS firmware should likely have it, but don't flash A525 firmware on the A526, you'll have problems.
I did try flashing with the A525 firmware but it just fails.
How can I use the Indian/INS firmware to add call recording to my phone? I tried to use just the CSC file with Odin from A525 firmware and that failed too.
You could try using the XSG (United Emirates Arab) firmware. I have it on my J7 Pro and it has the call recording function, not sure if it is the same for the A52 5G.
I'd suggest you flash the original firmware that came with your device first, then only flashing the CSC from the XSG firmware to see if you get call recording.
And use Frija to get the firmware, just go into its settings and turn on "Binary Nature" option for it to download the 5 part firmware instead of the 1 part firmware.
Sorry my bad, I didn't know there was a SM-A526W for the Canadian market only. I was thinking that your's was a SM-A526B, which is the international version. I don't know if the A526W will accept the A526B firmware, it might work or it might brick your phone.
Thanks for the help, it wouldn't accept the CSC from the SM-A526B firmware or the entire firmware already tried that. Any other suggestion?
Then no, you're pretty much stuck. I don't know whether any of the other Canadian firmwares have call recording enabled.
None of the Canadian firmware's have call recording and I have tried a number of different CSC using the *#272*IMEI# method which are available in the firmware. Guess its a no go
ashraftheboss said:
Sorry my bad, I didn't know there was a SM-A526W for the Canadian market only. I was thinking that your's was a SM-A526B, which is the international version. I don't know if the A526W will accept the A526B firmware, it might work or it might brick your phone.
Click to expand...
Click to collapse
W models can typically only flash W U and U1 firmware
It will only flash W firmware which I have done several times, but it will not flash U firmware or even U firmware CSC file
a52recording said:
It will only flash W firmware which I have done several times, but it will not flash U firmware or even U firmware CSC file
Click to expand...
Click to collapse
maybe if you posted the error you receive in patched odinas wellas the error it shows on device screen when it fails then we can help u
for example, if it gives a sha hash error or something its bcuz u arent using modified odin which is needed to flash u or u firmware to your w model and if it gives some error like sw rev check fail its because youre trying to downgrade and need a firmware with the same rev
Here are the pictures I blocked out the DID number
Was looking through the forums and would using a Thailand SIM change the CSC so I could have call recording?
a52recording said:
Was looking through the forums and would using a Thailand SIM change the CSC so I could have call recording?
Click to expand...
Click to collapse
Your SIM card does not set or change CSC.
I was reading this thread:
https://forum.xda-developers.com/t/a52s-change-csc-by-factory-reseting-with-a-sim.4360199/
Could I try the same?
I want to change the CSC of my S22+ from XAA to INS. Is there any way without rooting?
Hi there, I wish to change the region of my S22+. Unfortunately I've bought a Korean region version and wanted to flash a European Region firmware. Can someone please explain to me how I can do that (if it is possible ofc). Right now my phone is in stock condition (no BL unlocked, no Root).
Thanks in advance
abc_sk2002 said:
I want to change the CSC of my S22+ from XAA to INS. Is there any way without rooting?
Click to expand...
Click to collapse
EJECT SIM CARD
1.Download INS firmware
2.flash with odin
3.Uninstall cidmanager with ADB
test this
pitelasssss said:
EJECT SIM CARD
1.Download INS firmware
2.flash with odin
3.Uninstall cidmanager with ADB
test this
Click to expand...
Click to collapse
Did not work. The flashing with Odin failed with msg at the beginning "incompatible firmware". Cannot change XAA to INS.
abc_sk2002 said:
Did not work. The flashing with Odin failed with msg at the beginning "incompatible firmware". Cannot change XAA to INS.
Click to expand...
Click to collapse
Really need help here, even i am having the same problem. I want to change it to INS to use Samsung Pay India and possibly native call recording
Please Please Please Help and guide me how to go ahead.
SD Native call recording & CSC (without rooting)
Hi everyone, Looking for some insight and more educated projections. I'm in Canada, and our phones (SD) typically didn't get native call recording (or any recording allowed as a matter of fact after Pie was rolled out). I had to purchase a...
forum.xda-developers.com
With samkey, you should be able.
I'm thinking to do it too with a USA CSC to have acces to the Android beta 13.
I don't know if I can.
Hi,
I got an S22 very cheap. But IT is carrier locker.
EUX /EUX /DTM
I want EUX /EUX /EUX....
Can someone please explain me how it works? Never done this before
kl0br1ll3 said:
Hi,
I got an S22 very cheap. But IT is carrier locker.
EUX /EUX /DTM
I want EUX /EUX /EUX....
Can someone please explain me how it works? Never done this before
Click to expand...
Click to collapse
You dont have to change the CSC, just flash an unbranded EUX rom.
DTM is, where the phone was activated, if i remember it right.
If i flash a orignal EUX Firmware.
I still have waranty and the status is official ?
Should i go with Odin ?
kl0br1ll3 said:
If i flash a orignal EUX Firmware.
I still have waranty and the status is official ?
Should i go with Odin ?
Click to expand...
Click to collapse
exactly
Does anyone have any working solution for Changing csc from XAA to INS?
Please lemme know how to do it
SamFw Tool 4.7.1 - Remove Samsung FRP one click
Hi Today, we introducing SamFw FRP Tool version 4.7.1 Main function: Remove FRP with one click Change CSC with one click Remove FRP for new se...
samfw.com
Use this tool to get your phone's supported CSC list (under ADB commands tab). Then in the main tab you can change your CSC.
Takes seconds, for me no data was wiped and OTAs work perfectly. Changed on both my S22+ and my Tab S8+.
Is your phone SM-906U1 ?
From which csc to which csc did you change?
SM-906E, from XXV to ILO.
Ok, The discussions is on SM-906U1
If anybody has any success in changing CSC of SM-906U1 and unlocking boot loader, pls lemme know
DubelBoom said:
SM-906E, from XXV to ILO.
Click to expand...
Click to collapse
Why do you change CSC from XXV to ILO ? what are the benefits ?
I have same model SM-906E XXV/XXV
Does it allow showing "EOM Unlock" option in Developer mode for BL unlock?
(OXM) firmware => Multi-CSC
CSC country code listed: https://fixyourandroid.com/how-to/samsung-csc-codes/
coolpixs4 said:
Why do you change CSC from XXV to ILO ? what are the benefits ?
I have same model SM-906E XXV/XXV
Does it allow showing "EOM Unlock" option in Developer mode for BL unlock?
(OXM) firmware => Multi-CSC
CSC country code listed: https://fixyourandroid.com/how-to/samsung-csc-codes/
Click to expand...
Click to collapse
I bought my phone in Vietnam, but live in Israel and preferred to have my local CSC. I don't know if I could use VoLTE or WiFi Calling without changing it.
And yes OEM Unlock is an option for me under Developer Options.
Since different people are asking different questions, let me post what I know and can help you.
1. You are trying to change CSC from A to B which belongs to same model, can be easily done using SamFW tool or you can also try Samsung shell exploit from S22 forums.
2. U to U1 can be cross flashed using patched odin, which will change csc too.
3. If you are trying to do cross flashing means your model no doesn't match the model no of CSC you want to have like XAA to INS then sorry it's not possible.
mohitgalaxy3 said:
Since different people are asking different questions, let me post what I know and can help you.
1. You are trying to change CSC from A to B which belongs to same model, can be easily done using SamFW tool or you can also try Samsung shell exploit from S22 forums.
2. U to U1 can be cross flashed using patched odin, which will change csc too.
3. If you are trying to do cross flashing means your model no doesn't match the model no of CSC you want to have like XAA to INS then sorry it's not possible.
Click to expand...
Click to collapse
U and U1 isn't matching model. So how can you change csc as you said to point 3?
Cab I change mine to U1 xaa? Mine is 906u/ds.