This is a build of CyanogenMod 12.1 for the OnePlus 2.
This ROM is built directly from the CyanogenMod source code with absolutely no changes to it. It is meant to take the place of the official CyanogenMod nightlies until they come.
This build is currently in Alpha/Beta so it may not have all of the standard OnePlus 2 or CyanogenMod features implemented quite yet.
I will do my best and try to upload weekly builds if there have been changes made to the source code.
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Now that the standard disclaimer is out of the way...
I have built CyanogenMod for the OnePlus 2 directly from the official source code from the CyanogenMod team. I am not a developer. I am just a builder of the source code. If you submit any bug reports here, I will attempt to forward them to the CyanogenMod team, however there are no guarantees as to when or if I will see them. If you know how to, I would suggest posting your issue on the CyanogenMod OnePlus 2 GitHub page (Listed in the credits below). Any other questions are welcome here! This ROM is entirely untested as I currently do not have the ability to do so, so I am reaching out to the community for help with this. There is no guarantee that this ROM will be stable or that it will even boot for that matter. USE AT YOUR OWN RISK! Thanks to everyone!
ROM:
AFH
Google Drive
MediaFire
GApps:
As I have not been able to test this ROM yet, I would just assume that you could use any Lollipop GApps package with it.
I personally use OpenGApps.
Bugs:
-FP Not working
-Laser AF does not turn off after closing camera app. Reboot required before using camera again. (Disabled in latest build)
You tell me!
Source Code: https://github.com/CyanogenMod/android_device_oneplus_oneplus2
ROM OS Version: 5.1.x Lollipop
Version Information
Status: Alpha/Beta
Created 2015-12-07
Last Updated 2015-12-09
*Reserved 1*
*Reserved 2*
what about AF and FS?
Sent from my ONE A2003 using Tapatalk
sudhakarstoopy said:
what about AF and FS?
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
I'm not sure. As I stated in the first post, I have not been able to test the ROM yet. It is built directly from the CyanogenMod source code. I have not changed any of the code for it.
Downloading ))))
jbw716 said:
I'm not sure. As I stated in the first post, I have not been able to test the ROM yet. It is built directly from the CyanogenMod source code. I have not changed any of the code for it.
Click to expand...
Click to collapse
Okay.. let me download n check
Sent from my ONE A2003 using Tapatalk
sudhakarstoopy said:
Okay.. let me download n check
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Thanks! Please post your results after flashing!
*okay - ill report when I get this going
Laser autofocus keeps turned on after camera app is closed, need reboot to use camera again. Overall, great rom, smooth.
Fingerprint working?
No, FP not working, i think because we don't have sources of FP.
acmerw said:
Laser autofocus keeps turned on after camera app is closed, need reboot to use camera again. Overall, great rom, smooth.
Click to expand...
Click to collapse
Thank the CyanogenMod team. Not me!
I'll see if I can submit a bug report to the CM team. I'll update the original post accordingly too. Thanks!
Edit: Issue submitted to the CyanogenMod OPT GitHub page.
acmerw said:
Laser autofocus keeps turned on after camera app is closed, need reboot to use camera again. Overall, great rom, smooth.
Click to expand...
Click to collapse
Using any root file explorer, try deleting "sensors.hal.tof.so"
Location should be system/lib64/hw/ and the file will be in there. Reboot and try again to see if this fixes it.
Hey everyone. I just got approved as a developer on Android File Host so I will upload the ROM to there ASAP and update the original post with the new link for (hopefully) faster downloads!
kuban_kevin said:
Using any root file explorer, try deleting "sensors.hal.tof.so"
Location should be system/lib64/hw/ and the file will be in there. Reboot and try again to see if this fixes it.
Click to expand...
Click to collapse
I would recompile the ROM without this file, but seeing as how long it takes to compile a ROM, I will try to remember to remove it before the next build instead. For now I'm just going to leave it though. As I have previously stated, I am not a developer, so I was wondering... Does this actually fix the laser AF or does it just disable it? Thanks for your input!
ROM uploaded to AFH and links updated!
jbw716 said:
I would recompile the ROM without this file, but seeing as how long it takes to compile a ROM, I will try to remember to remove it before the next build instead. For now I'm just going to leave it though. As I have previously stated, I am not a developer, so I was wondering... Does this actually fix the laser AF or does it just disable it? Thanks for your input!
Click to expand...
Click to collapse
just disables it. Doesn't fix it
Sent from my OnePlus 2 using Tapatalk
I need everyone's input on this. Should I keep these builds as the pure CyanogenMod builds so that we will get all of the latest bug fixes and features straight from the CyanogenMod team, or should I see about applying different ROM fixes/workarounds such as the camera workaround which disables the laser auto focus entirely?
jbw716 said:
I would recompile the ROM without this file, but seeing as how long it takes to compile a ROM, I will try to remember to remove it before the next build instead. For now I'm just going to leave it though. As I have previously stated, I am not a developer, so I was wondering... Does this actually fix the laser AF or does it just disable it? Thanks for your input!
Click to expand...
Click to collapse
Actually it ll fix camera fc bro
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0, which is designed to increase performance and reliability over stock Android for your device.
THIS IS UNOFFICIAL EXPERIMENTAL BUILDS WHICH CONTAINS CODE TO BE TESTED BEFORE IT IS MERGED INTO CM.
IF YOU WANT OFFICIAL BUILDS THEN CHECK BACK IN A FEW DAYS.
Official will come when the last annoying incall audio bug is squashed
Code:
#include
Your warranty is now void!
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this ROM before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/
Important information:
This thread is for CyanogenMod 12 opensource builds for the LG G3 (D852). The following will not be supported in this thread:
Custom Kernels
Mods
Modified system files
Xposed
Instructions:
Your device will need to be rooted and have custom recovery before proceeding. Please check your device forum for instructions.
First time flashing CyanogenMod 12 your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device
Flash CyanogenMod.
Optional: Install the Google Apps add-on package.
Already on CM12, try a dirty flash.
Reboot into recovery
Make back up <optional>
Wipe cache, system, dalvik-cache
Optional: Install the Google Apps add-on package.
Reboot
Download: CM12 EXPERIMENTAL BUILDS - Check EXPERIMENTAL folder for your device
AndroidFileHost - HERE
BasketBuild - HERE
Goo.im - HERE
Google Apps: Optional add on package that allows Google Play services such as Google Play Store and other Google Apps outside of AOSP based ROMs.
Check THIS post
Changelog:
CyanogenMod Change Log HERE
G3 Specific Change Log HERE
D850 Specific Change Log HERE
AndroidUser00110001 Change Log HERE
invsisblek Change Log HERE
GitHub - Source Code:
GitHub - CyanogenMod
GitHub - AndroidUser00110001
GitHub - invsisblek
Credits:
Thanks to all sent Paypal!!!
CyanogenMod
Thanks to @invisiblek for the work he has done on device trees.
Change Log & Other info
Changelog:
2015-01-12 - In addition to the changes below. This build is currently being built and uploaded.
g3: Get rid of ctrl_interface=/data/misc/wifi/sockets http://review.cyanogenmod.org/#/c/84746/
camera: add 3840x2160 video size http://review.cyanogenmod.org/#/c/84832/
camera: set lge-camera parameter - http://review.cyanogenmod.org/#/c/84833/
2015-01-11 - This build is currently being uploaded.
In addition to the changes from 2015-01-08
Set System prop to allow proper Imsi handling - http://review.cyanogenmod.org/#/c/84293/
selinux: Fix access to the vibrator amplification sysfs - http://review.cyanogenmod.org/#/c/84770/
Camera2: Samsung 4k Camera workaround - http://review.cyanogenmod.org/#/c/83332/
Some changes may have been merged but not in latest nightly.
2015-01-08 - This build is currently being built and will be on servers in about an hour from now.
In addition to the changelog in post #1 the following code has been merged into today's EXPERIMENTAL TEST BUILD
Adjust volume for voice-speaker
Default AT&T G3 APN
d850 cleanup
sepolicy: give radio access to tap2wake node
ProximitySensorManager: disable TapToWake while we have a prox wakelock
Bugs:
Only report bugs for UNOFFICIAL EXPERIMENTAL BUILDS pertaining to new code that is listed above in the changelog. Please report if anything is broken or if fixes actually fix something. THANKS!
For proper technique on reporting bugs:
Read THIS and THIS.
When reporting a bug be as specific as possible.
Make sure you can replicate the bug when coming from a clean install with no other apps installed besides what comes with ROM and GApps.
If you narrowed down a specific app that crashes only on CM ROM then please include app version and all info about app too.
Do not have any modifications done to the Android system besides.
It is very important to read on the proper technique to report a bug. Helps keep thread clean and makes tracking issues easier.
OFFICIAL FOR D855 please
Awesome, glad to see another D852 build! Thanks. Testing it out now!
D855 plz...
gdonanthony said:
OFFICIAL FOR D855 please
Click to expand...
Click to collapse
Kookitza said:
D855 plz...
Click to expand...
Click to collapse
Isn't there CM12 for D855?
sean222 said:
Awesome, glad to see another D852 build! Thanks. Testing it out now!
Click to expand...
Click to collapse
Let me know if it boots or not and what issues it may have please.
What's the difference between this and the other Cyanogenmod 12 for the G3 ?
AndroidUser00110001 said:
Isn't there CM12 for D855?
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g3/development/guide-how-to-build-cyanogenmod-12-t2953132
Professor Jones said:
What's the difference between this and the other Cyanogenmod 12 for the G3 ?
Click to expand...
Click to collapse
Is there CM12 for the D852?
Kookitza said:
http://forum.xda-developers.com/lg-g3/development/guide-how-to-build-cyanogenmod-12-t2953132
Click to expand...
Click to collapse
Me too If there is none than maybe I will build.
AndroidUser00110001 said:
Is there CM12 for the D852?
Click to expand...
Click to collapse
Sorry, I thought this one was for the 855. Nightly means that it gets an update every night ?
AndroidUser00110001 said:
Me too If there is none than maybe I will build.
Click to expand...
Click to collapse
There is one: http://forum.xda-developers.com/lg-g3/development/rom-cyanogenmod-12-t2945191
But it's not nightly...
Plz build for us also.. :fingers-crossed:
AndroidUser00110001 said:
Isn't there CM12 for D855?
Click to expand...
Click to collapse
we need OFFICIAL but its okay i can wait
So is this working? Anyone flash it yet?
AndroidUser00110001 said:
So is this working? Anyone flash it yet?
Click to expand...
Click to collapse
I just finished flashing it on my d852g , so far it's looking good. Wifi ok, LTE ok, bluetooth ok. I flashed gapps micro beta from the 1st post here, I'll report back later!! I gotta tell you, flashing ROM's on this device is soooo much faster that my Asus TF300T tablet
zurny said:
I just finished flashing it on my d852g , so far it's looking good. Wifi ok, LTE ok, bluetooth ok. I flash gapps micro beta from the 1st post here, I'll report back later!! I gotta tell you, flashing ROM's on this device is soooo much faster that my Asus TF300T tablet
Click to expand...
Click to collapse
Thanks! @Cuzz1369 also tested for me and all seems OK for now.
gdonanthony said:
we need OFFICIAL but its okay i can wait
Click to expand...
Click to collapse
https://goo.im/devs/androiduser00110001/ROM/D855/CM12/
Let me know in private if it boots and if anything different is broke when compared to other ROMs you have flashed.
AndroidUser00110001 said:
https://goo.im/devs/androiduser00110001/ROM/D855/CM12/
Let me know in private if it boots and if anything different is broke when compared to other ROMs you have flashed.
Click to expand...
Click to collapse
Flashing NOW!! :victory:
AndroidUser00110001 said:
https://goo.im/devs/androiduser00110001/ROM/D855/CM12/
Let me know in private if it boots and if anything different is broke when compared to other ROMs you have flashed.
Click to expand...
Click to collapse
perfect. found no bug till now
For D855 users that have asked
http://forum.xda-developers.com/lg-g3/development/rom-cyanogenmod-12-unofficial-nightly-t2973522
Now lets get back on topic in this thread
Code:
#include <disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
AttentionThis WILL re-encrypt your device. There is currently a debate whether or not it should be enabled. If you do not want your device re-encrypted, either don't flash this ROM or flash a kernel with encryption disabled BEFORE booting the ROM the first time
With the being said Enjoy
Downloads
CyanogenMod Nightlies
Download GApps here
Sources
Device tree
Kernel
Problems
Must flash MMB29S firmware from Google. If you flashed any vendor partition mods, you'll need to flash this firmware too.
Questions
Is this ROM LTE-supported yet
No, unfortunately it isn't. We are working on finding a maintainer. PM me if you are interested
Where do I get themes??
Get Them Here
Or Here...
Or Even Here!
NOTES
I do not maintain this ROM. I am the Assistant maintainer(essentially). @simonsickle maintainers this ROM but is too focused with other projects to want to maintain a thread for CM. I maintain this thread. Ifyou have a problem direct it too me, please do not PM simon directly with issues regarding this ROM. Thank you.
Thanks To/Credits
Code:
* SimonSickle for getting this official-ized and for maintaining it
* craigacgomez for the gapss and device trees
Click to expand...
Click to collapse
XDA:DevDB Information
CyanogenMod 13 - Official, ROM for the Nexus 9
Contributors
zawata, simonsickle
Source Code: https://github.com/CyanogenMod/android_device_htc_flounder
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: MMB29R
Based On: CyanogenMod
Version Information
Status: Nightly
Current Stable Version: http://download.cyan
Stable Release Date: 2015-10-07
Created 2015-01-19
Last Updated 2016-02-01
Reserved
CHANGELOG
Nice work!! here is a video running the Rom: https://www.youtube.com/watch?v=OVqtEskQr24
Thanks for putting this together. Hopefully we will eventually see an official build for the Nexus 9
I can't see any 3rd party keyboards in settings. There's only the preinstalled one, but I have installed two other keyboards. Has anyone else the same?
L
hhairplane said:
Thanks for putting this together. Hopefully we will eventually see an official build for the Nexus 9
Click to expand...
Click to collapse
it hopefully will be coming soon. eveyrthing is in place except for one of josh's commits, the device trees are ready all we need is a maintainer. Id do it but frankly i dont think id be good enough at it
im gonna try my hand at being a maintainer for a rom i just ported and am talk to the lead dev about getting official but CM is outta my league
however i will provide builds(ill try to do daily but i cant guarantee it) until the rom goes official
9Lukas5 said:
I can't see any 3rd party keyboards in settings. There's only the preinstalled one, but I have installed two other keyboards. Has anyone else the same?
L
Click to expand...
Click to collapse
yeah confirmed it with the heavily CM based rom im running
ill look into it and notify you guys when its fixed
Thanks for stock Cyanogenmod.
Themes is broken? I attempted to install few from play store but kept failing to install. Thoughts?
Sent from my Nexus 9 using XDA Free mobile app
Hi i have a question.
I have Nexus 9 with root, lollipop 5.0.1 and TWRP v2.8.4.0 installed
i would like to know if i download this .zip once its available, and i use the TWRP install option, if im going to be able to install it. I tried with other roms but no luck... i cant install them dont know why.
Anyways, its possible to install kit kat on nexus 9? What rom could i use? thx
Themes will not work from cm11 to cm12... Complete rewrite and update of themes
Sent from my SM-N9005 using Tapatalk
oskuro83 said:
Hi i have a question.
I have Nexus 9 with root, lollipop 5.0.1 and TWRP v2.8.4.0 installed
i would like to know if i download this .zip once its available, and i use the TWRP install option, if im going to be able to install it. I tried with other roms but no luck... i cant install them dont know why.
Anyways, its possible to install kit kat on nexus 9? What rom could i use? thx
Click to expand...
Click to collapse
This ROM should work, I don't see why it wouldn't
Try flashing it and if it doesn't work let me know and I'll hello you figure out why
And no, there's almost no way you'll ever be able to get KitKat on this device, the best you could do is a KitKat theme
Finnaly! CM12 is here is work great on mine. Thanks, Any idea when it will be available directly from CM?
Max128 said:
Finnaly! CM12 is here is work great on mine. Thanks, Any idea when it will be available directly from CM?
Click to expand...
Click to collapse
I'll look into it but I really have no estimate
I don't want to be a maintainer of the ROM(I don't think I would be good enough) so we'll go official whenever someone wants to maintain it
Does this support LTE version
Download?
Where is the download?
@keanon are you able to read the op?
It says: "Check back in several minutes"
Means a new build is on its way why it's senseless to flash an older one, but wait instead for the new one
L
Gesendet von meinem One mit Tapatalk
I'd also like to know if LTE is supported. Thanks
9Lukas5 said:
@keanon are you able to read the op?
It says: "Check back in several minutes"
Means a new build is on its way why it's senseless to flash an older one, but wait instead for the new one
L
Gesendet von meinem One mit Tapatalk
Click to expand...
Click to collapse
sorry guys i could have swore i added the link, it must have regressed yesterday, im adding the link now
EDIT:
its up
as it turns out, the DEV-DB post and the OP arent the same thing so if i edit the OP then the changes arent reflected in the DEVDB OP so if i edit that one, it over writes all my changes on the thread OP
Edit: I no longer own this phone. Information in the OP may be outdated and/or incorrect. Please go to the new thread at http://forum.xda-developers.com/nexus-6/development/rom-cyanogenmod-13-nightlies-snapshots-t3363769
DISCLAIMER: I AM IN NO WAY RESPONSIBLE FOR ANY PROBLEMS ON YOUR DEVICES CAUSED BY FLASHING THESE BUILDS. THE UPSTREAM CODE AND BUILDING IS MAINTAINED BY THE CYANOGENMOD TEAM, NOT ME. I AM NOT ASSOCIATED WITH THEIR TEAM, I AM JUST THE THREAD OWNER.
It was a fun round of unofficial nightlies but the official upstream CM13 builder for shamu is active! Please use the new download links below to grab the official nightlies. Dirty flash seems to work fine if you go from my unofficial 11-29 build to the official 11-30 one. As mentioned in the first post, I will be ceasing my personal builds for now and leave it to the CM team.
Notes: CyanogenMod's stock kernel forces encryption of storage. Please download one of the third party kernels if you wish to avoid this. Also this thread assumes you have kept up to date with bootloaders and radio. At the time of writing, the latest is from the MRA58K release and can be downloaded here.
CyanogenMod 13.0 Nightlies: Download
Open GApps: Download (I recommend arm, 6.0, micro)
Changelog: CMX Changelog
Third party kernels:
Elite Kernel
Hells Core
XDA:DevDB Information
CyanogenMod 13.0, ROM for the Nexus 6
Contributors
djh816
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-11-22
Last Updated 2015-12-06
There's already a thread
http://forum.xda-developers.com/nexus-6/development/rom-cyanogenmod-13-0-android-6-0-t3231497
HipKat said:
There's already a thread
http://forum.xda-developers.com/nexus-6/development/rom-cyanogenmod-13-0-android-6-0-t3231497
Click to expand...
Click to collapse
Correct, but not nightly and as far as I can tell albinoman887 is also making fixes which implies altering of upstream code. My thread intends to serve as a purely upstream source build.
djh816 said:
Correct, but not nightly and as far as I can tell albinoman887 is also making fixes which implies altering of upstream code. My thread intends to serve as a purely upstream source build.
Click to expand...
Click to collapse
I would like to say thank you, and I believe that this ROM deserves its own thread respectfully. Since there isn't much action from that other Alpha build and if you are truly building on a nightly basis then this is much appreciated and I look forward to testing.
Thanks!
HipKat said:
There's already a thread
http://forum.xda-developers.com/nexus-6/development/rom-cyanogenmod-13-0-android-6-0-t3231497
Click to expand...
Click to collapse
A Thread with Zero Support from the Thread OP and no Nightlys , its good to see this Thread with hopfully regular updates since I currently have working in the border guarding Work and never have time for building. But what i know from @djh816 updates come many times.
Tylog said:
A Thread with Zero Support from the Thread OP and no Nightlys , its good to see this Thread with hopfully regular updates since I currently have bodybuilding in the border guarding Work and never have time for building. But what i know from @djh816 updates come many times.
Click to expand...
Click to collapse
Thanks for the support and glad to build it. Just to make sure credit is given where due, any bug fixes will be made only by the CyanogenMod team and/or any git contributors. Not sure if you'll get much support from me either but I'll certainly be glad to give any tips I find. For example, if this one specific bug rears its ugly head again, you may need to rename the SetupWizard apk inside /system/app-priv/ as that has been constantly force closing for me prior to today's build.
djh816 said:
Thanks for the support and glad to build it. Just to make sure credit is given where due, any bug fixes will be made only by the CyanogenMod team and/or any git contributors. Not sure if you'll get much support from me either but I'll certainly be glad to give any tips I find. For example, if this one specific bug rears its ugly head again, you may need to rename the SetupWizard apk inside /system/app-priv/ as that has been constantly force closing for me prior to today's build.
Click to expand...
Click to collapse
MAybe test other Gapps, i had this isues with a few cm 13 builds in combination with banks gapps , i like Banks gapps but for now not with CM13 . No support for me no problem , only 1 builds in 3 Weeks in this early stage is a problem , thats what i mean . I have at the moment zero time , i am one day in the week at home and thats time for my son and my wife
Thanks for the builds. I tried (unsuccessfully) to build my own, so this helps out a lot!
nightlies has not started yet.. looking forward..
Awesome! Thanks!
Sent from my Nexus 6 using Tapatalk
Can anyone confirm that you can write to system on this build???? Wasn't working on a build from 11.20.
Sent from my Nexus 6 using Tapatalk
mexiken said:
Can anyone confirm that you can write to system on this build???? Wasn't working on a build from 11.20.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Still is not working.. I'd love to know of a fix, if any...
mexiken said:
Can anyone confirm that you can write to system on this build???? Wasn't working on a build from 11.20.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I modified build.prop just fine.
---------- Post added at 03:10 AM ---------- Previous post was at 03:08 AM ----------
Thanks OP, for bringing this to us. Seems pretty good for such an early build. I just barely flashed it but seems great so far.
Does ad away work on this build? It wouldn't work on the previous build.
Is security disable on the ROM?
cz829x18 said:
Does ad away work on this build? It wouldn't work on the previous build.
Click to expand...
Click to collapse
Doesn't seem to just yet. As others have mentioned, no /system writing just yet.
evolishesh said:
Is security disable on the ROM?
Click to expand...
Click to collapse
Doesn't seem like it, I've tried "adb shell" with "su" after but still drops me to a "$" shell rather than "#"
Will you be adding any features or will this be more of a slim to stock cm13 builds? Also thanks for your contributions
nighthawk626 said:
Will you be adding any features or will this be more of a slim to stock cm13 builds? Also thanks for your contributions
Click to expand...
Click to collapse
No features added whatsoever If they add it upstream (included in CM) it'll be here, otherwise no. Absolutely stock. Consider me a third party buildbot slave
Very nice ROM. Just to let everyone know I just finished flashing with the Open GApps Pico and it's working fine. I know, it's bad form to use something that's not recommended.
One quick question, do we get any notification that the new nightly is ready to flash or do we just check the download site?
dlbarron said:
Very nice ROM. Just to let everyone know I just finished flashing with the Open GApps Pico and it's working fine. I know, it's bad form to use something that's not recommended.
One quick question, do we get any notification that the new nightly is ready to flash or do we just check the download site?
Click to expand...
Click to collapse
For now just the download site. I may setup something similar to the pushbullet feed Chroma has if people are interested but haven't spent the time to do it yet. New 11-23 build is up now though
Edit: Woot, looks like they fixed the system rw mounting. Hm but my test file disappeared on reboot.. maybe not yet
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What is AOSP?
AOSP is Android as Google publish without other modifications. More or less AOSP is the Nexus devices stock rom without gapps.
Anyway to get a working system I added some changes from CodeAurora Forum and CyanogenMod. I added also 3 non-AOSP features for a better user experience (Advanced Reboot, "Clear All" button in Recents and an option to delete screenshots from the notification area) and I'm NOT going to add something other.
Features
Pure AOSP
It's pure AOSP (based on Slim and CAF)
Downloads
Latest Build
GAPPS (Please use the Micro GAPPS Package that's the one working properly)
Link To Download Folder
How To Install
1. Place ROM & Gapps in your SD Card
2. Reboot in Recovery Mode
3. Wipe Data/Factory Reset
4. Wipe Dalvik cache
5. Install the ROM zip
6. Install the GAPPS zip
7. Reboot
8. Profit
P.S: Huge shout out to Team M8 for making this possible, without them i am nothing.
XDA:DevDB Information
AOSPB For Verizon G3, ROM for the Verizon LG G3
Contributors
amirfida, PunkUnity
Source Code: https://github.com/AOSPB
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSP + CAF + Some stuff from Slim
Version Information
Status: Testing
Created 2016-03-09
Last Updated 2016-03-11
News: AOSPB haven't updated their code from past couple of days so i won't compile until they update their source. Cheers
This is mine thanks download now
Because this is AOSP will android pay work?
Okay, here's whats not quite working right now
CaptainElwood said:
Because this is AOSP will android pay work?
Click to expand...
Click to collapse
NFC is stuck and causes a wakelock, remove NFC's APK from /system/app, so no, Android Pay does not work
And Baseband is not detected, this is a common issue with newer ROMs on the VS985, ill hunt down CM's commits for this
Probably a gapps issue, but Google Play Services refuses to work for signing in at the first boot, looking for my old gapps now, ill edit this if it was indeed because of the March 10th Gapps
Otherwise, it runs smooth as butter, keep up the good work!
KShion619 said:
Okay, here's whats not quite working right now
NFC is stuck and causes a wakelock, remove NFC's APK from /system/app, so no, Android Pay does not work
And Baseband is not detected, this is a common issue with newer ROMs on the VS985, ill hunt down CM's commits for this
Probably a gapps issue, but Google Play Services refuses to work for signing in at the first boot, looking for my old gapps now, ill edit this if it was indeed because of the March 10th Gapps
Otherwise, it runs smooth as butter, keep up the good work!
Click to expand...
Click to collapse
if you do find that commit please let me know, ill soon upload a new build
amirfida said:
if you do find that commit please let me know, ill soon upload a new build
Click to expand...
Click to collapse
https://github.com/CyanogenMod/andr...mon/blob/cm-13.0/rootdir/etc/init.baseband.sh
I haven't seen your version of g3-common or anything but on most ROMs this winds up being what you need to do
As far as Gapps, it only happens when you install OpenGapps Stock builds, pico runs perfectly
as far as NFC, ill try replacing the apk for it and libs from CM or XenonHD and get those posted if they work
KShion619 said:
https://github.com/CyanogenMod/andr...mon/blob/cm-13.0/rootdir/etc/init.baseband.sh
I haven't seen your version of g3-common or anything but on most ROMs this winds up being what you need to do
As far as Gapps, it only happens when you install OpenGapps Stock builds, pico runs perfectly
as far as NFC, ill try replacing the apk for it and libs from CM or XenonHD and get those posted if they work
Click to expand...
Click to collapse
hey thanks for that i really appreciate it, will mention you in credits for sure
waiting for the workaround, i never really use NFC so never knew that its not working, really appreciate your hard work
Edit: My build uses CM device trees so the file is already the same one, i am testing new build will release it soon
Edit 2: New build has been uploaded compiled with Uber Toolchain
Just curious will Layers themes work on this?
AngryManMLS said:
Just curious will Layers themes work on this?
Click to expand...
Click to collapse
nope it won't... Sorry
amirfida said:
nope it won't... Sorry
Click to expand...
Click to collapse
Aw well. I'll check out this ROM regardless. Thanks for bringing this to our G3.
AngryManMLS said:
Aw well. I'll check out this ROM regardless. Thanks for bringing this to our G3.
Click to expand...
Click to collapse
You are welcome
Found some odd little issue on the Newest Build, unsure if this one applies to the previous, but the Ringer, regardless of what ringtone is set, does not ring, and Autobrightness does not work, so turning it off is the only way to set brightness, and because you're using CM device trees and kernels, you technically have the proper libs, unless those files are on CM's venders for LG :silly:
KShion619 said:
Found some odd little issue on the Newest Build, unsure if this one applies to the previous, but the Ringer, regardless of what ringtone is set, does not ring, and Autobrightness does not work, so turning it off is the only way to set brightness, and because you're using CM device trees and kernels, you technically have the proper libs, unless those files are on CM's venders for LG :silly:
Click to expand...
Click to collapse
Hey, thanks for pointing out those issues, yes i am using CM kernel and device trees i guess that's the reason brightness is not working properly because even CM had that issue many users reported that, i guess its fixed. Ill build again and see if these issues are fixed and if they are ill post the build. AOSPB guys haven't updated their source from past 17 Days that's the reason i didn't make a new build. Thanks once again
amirfida said:
Hey, thanks for pointing out those issues, yes i am using CM kernel and device trees i guess that's the reason brightness is not working properly because even CM had that issue many users reported that, i guess its fixed. Ill build again and see if these issues are fixed and if they are ill post the build. AOSPB guys haven't updated their source from past 17 Days that's the reason i didn't make a new build. Thanks once again
Click to expand...
Click to collapse
yeah, im mainly referring to the CM vendor trees, im not quite sure if that matters
AngryManMLS said:
Aw well. I'll check out this ROM regardless. Thanks for bringing this to our G3.
Click to expand...
Click to collapse
In 6.0 rro was merged. Any aosp or slim rom on 6.0 will work with layers as long as it doesnt have cmte.
Unrooted CM13 for Oneplus 2
Legal Bit:
Your warranty is now void. HA! This is Oneplus were talking about
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
WHAT IS THIS ROM?
This rom is based of the original Cyanogen Mod however root option has been removed off the rom. This allows for the use of all major banking apps without installing extra Xposed modules and is great for people who want the benefits of Cyanogen Mod without the risks of having root!
All of the default apps work without issues and that includes the theme engine because none of it requires root access!
Once I have compiled the code I will always test it on my Oneplus 2 to make sure that it works without issues.
Downloads
INFORMATION: I am unable to produce builds at this time as I am extremely busy and unfortunately this comes second. I'll post an update when I am able to continue STABLE - Last updated 24-04-2016
OTA:
Primary
OneDrive Mirror
FULL ROM:
Primary
OneDrive Mirror
Screenshots
Inatallation
Coming from a vanilla Cyanogen 13 rom:
1. Flash the OTA from downloads
2. Flash ARM 64 GApps if you havent already
Coming from another rom:
1. Perform full wipe
2. Flash rom through recovery
3. Flash ARM64 GApps
Coming from another 6.0.1 rom:
1. Flash oxygen os modem
2. Flash rom through recovery
3. Flash ARM64 GApps
Thanks to @urgali for this fix!
From Stock:
1. Flash rom through recovery
2. Flash ARM64 GApps
DONTATIONSIf you want to help me out by donating then please click HERE! It would be much appreciated and will help me get more resources to help build ROM's faster!
If you have anything you would like to see adding to this ROM please let me know and I'll see what I can do!
Sources:
Device Tree
KERNAL
Vendor Files
XDA:DevDB Information
Unrooted CM13 for Oneplus 2, ROM for the OnePlus 2
Contributors
MrSheen123
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 1.0.0
Stable Release Date: 2016-03-29
Created 2016-03-30
Last Updated 2016-05-25
Reserved
Wow. Nice, I can now use it my bank's app in OP2 too. Nice. Thanks a lot.
@MrSheen123 sorry mate....are you planning to do nightly?Tnx a lot
Flamehell said:
@MrSheen123 sorry mate....are you planning to do nightly?Tnx a lot
Click to expand...
Click to collapse
Hi,
I will give it my best shot to make it a nightly process but I can't guarantee it unfortunately.
-Sean
krishna442 said:
Wow. Nice, I can now use it my bank's app in OP2 too. Nice. Thanks a lot.
Click to expand...
Click to collapse
Your welcome good to have positive feedback! You will see the root options still in developer options but rest assured they don't work. I'm currently figuring out how to remove the options as well to make it cleaner!
-Sean
Um how exactly do you plan on having CM features when these need root for the settings to work? Pretty sure no root will break themes also?
MrSheen123 said:
Your welcome good to have positive feedback! You will see the root options still in developer options but rest assured they don't work. I'm currently figuring out how to remove the options as well to make it cleaner!
-Sean
Click to expand...
Click to collapse
Nice Sean.
May be this will help.
Code:
listItems.remove(position);
here position is your list row id
notifyDataSetChanged();
krishna442 said:
Nice Sean.
May be this will help.
Code:
listItems.remove(position);
here position is your list row id
notifyDataSetChanged();
Click to expand...
Click to collapse
Sweet thanks! I'll look into adding it
djsubterrain said:
Um how exactly do you plan on having CM features when these need root for the settings to work? Pretty sure no root will break themes also?
Click to expand...
Click to collapse
Hi,
Themes are coded into the OS and do not require root for them to function. Plus you get the benefits like the speed, battery life and other great features!
-Sean
Bump and also to say the full ROMS are being uploaded and beta section created
@The_Merovingian
I cannot see any Sources like Device, Kernel and Source Code
Regards,
Taker18
Info
Ah yes I can get the source code for the main cyanogen but I am new to Android development so I am not sure how to do the other two and get it right. Any tips?
Taker18 said:
@The_Merovingian
I cannot see any Sources like Device, Kernel and Source Code
Regards,
Taker18
Click to expand...
Click to collapse
MrSheen123 said:
Ah yes I can get the source code for the main cyanogen but I am new to Android development so I am not sure how to do the other two and get it right. Any tips?
Click to expand...
Click to collapse
who is building this cm13 builds?
I am
I am building these builds
Taker18 said:
who is building this cm13 builds?
Click to expand...
Click to collapse
MrSheen123 said:
I am building these builds
Click to expand...
Click to collapse
and witch device and kernel repos you are using?
For the rom
https://github.com/CyanogenMod/android_device_oneplus_oneplus2
Kernel:
https://github.com/CyanogenMod/android_kernel_oneplus_msm8994
Taker18 said:
and witch device and kernel repos you are using?
Click to expand...
Click to collapse
MrSheen123 said:
For the rom
https://github.com/CyanogenMod/android_device_oneplus_oneplus2
Kernel:
https://github.com/CyanogenMod/android_kernel_oneplus_msm8994
Click to expand...
Click to collapse
The write in OP
Sources:
Device link
Kernel link
and then put the Source Code of Cm13 also in
Regards,
Taker18
Ah right ok
No problems i will do that now
Taker18 said:
The write in OP
Sources:
Device link
Kernel link
and then put the Source Code of Cm13 also in
Regards,
Taker18
Click to expand...
Click to collapse
my phone is rooted, can i still intall this unrooted cm13? and will it unrooted my phone? i want to use some banking apps that why i tot of installing this. Thanks in advance.