Hello there,my Wave 8 HD+ stuck in android boot logo. I downloaded the wave8hd_20151105_v1.8 update thru wireless update and install, it says error in installing:
E:error in /mnt/internal_sd/adupsfota/update.zip
(Status 7)
Installation aborted.
My tablet is now in recovery mode and cant move highlight due to no volume buttons available,i can only select the "reboot system now" option.
Any other alternative for volume button so that i could just do the factory reset??
I also followed the detailed instruction on bluewave website on how to update the said Tablet thru PC but to no avail.
i emailed both the Telecom Company from where i get my Bluewave Tablet and the Bluewave Customer support but until now they stiil haven't replied yet.
thank you very much for your immediate reply.
-Jovi
jovirex said:
Hello there,my Wave 8 HD+ stuck in android boot logo. I downloaded the wave8hd_20151105_v1.8 update thru wireless update and install, it says error in installing:
E:error in /mnt/internal_sd/adupsfota/update.zip
(Status 7)
Installation aborted.
My tablet is now in recovery mode and cant move highlight due to no volume buttons available,i can only select the "reboot system now" option.
Any other alternative for volume button so that i could just do the factory reset??
I also followed the detailed instruction on bluewave website on how to update the said Tablet thru PC but to no avail.
i emailed both the Telecom Company from where i get my Bluewave Tablet and the Bluewave Customer support but until now they stiil haven't replied yet.
thank you very much for your immediate reply.
-Jovi
Click to expand...
Click to collapse
maybe try to use adb and try to push the firmware manually.. if they have a firmware download available
toolhas4degrees said:
maybe try to use adb and try to push the firmware manually.. if they have a firmware download available
Click to expand...
Click to collapse
I did use the software Rockchip Batch Tool v1.7 provided by Bluewave in their website,install the 33GT driver for my tab(Tab can now be seen by my PC and download the correct firmware update(using my serial number at the back of said tablet) still provided by Bluewave,but still error in upgrade..
i just want to know how to change the highlighted option in recovery mode so i can wipe/factory reset my Tablet disregarding the said update..
there is an option in recovery mode "recover system from back up" but i could not choose to highlight and select the option..
any alternatives for the volume button??Btw,the firmware provided by Bluewave is in ".img" format,not "zip"..
thank you so much for your reply..
-Jovi
i have the same problem, got an error after wireless update.. please help!
to fix this... use your otg cable and connect a usb mouse then reboot it once its reboot use the mouse to move into the recovery mode... wipe data and cache then select update adb sideload once inside the sideload press the power button until it reboot.. once you see the bluewave and its start to have a loading in the lower right corner.. voila... your tablet is fix ... hope it help u
ohgnevets said:
i have the same problem, got an error after wireless update.. please help!
Click to expand...
Click to collapse
wave 8hd+
jho_zep said:
to fix this... use your otg cable and connect a usb mouse then reboot it once its reboot use the mouse to move into the recovery mode... wipe data and cache then select update adb sideload once inside the sideload press the power button until it reboot.. once you see the bluewave and its start to have a loading in the lower right corner.. voila... your tablet is fix ... hope it help u
Click to expand...
Click to collapse
hello, jho_zep, thank you so much for your reply, i am now able to move the highlight to select using my mouse, but still when i try to update from ADB, it tells me to send package to the device etc.. and i also tried to press the power button, it wont reboot the system, it would only shutdown the system.. another thing, i still cant get rid of the system update. " installing system update" then error comes in, my android is down.. i tried wipe date/ factory reset, still nothing.
Thanks in advance
Do you already solve your problem? because I have now the same problem as this.
I have pressed the wireless update then it restarted and it says an Error status 7.
I don't know what to do and how to deal with this problem.
can you help me?
My nextbook tablet rk3026 has a partition named metadata that holds the recovery boot commands. You could possibly try to wipe it and do a factory reset. I don't think it actually gets mounted so you would need to find a file the same size as the partition and dd to it. Or back up your system with rockchip flash tool then using a hex editor replace all data in metadata image with zeros. Obviously be careful. Here is a tool download with included guide credits to finless at freaktab(not sure if he is here at xda) for posting it.
http://freaktab.com/forum/developme...p-your-rk-device-rom-with-the-new-rk-2-1-tool
as always BACKUP and know if you don't do it correctly you may get a brick.
thank you for the response Destructos. but that solution won't help for my freakin weird tab 33gt HD+.
I get frustrated now
Problem solved
first thing to do is make sure that you have already installed the rkchip_usb driver in your computer.
What are the requirements?
1st of course your Tablet and Cable Connector
2nd Finless ROM Flash Tool v1.37
3rd Rokchip BatchTool v1.7
4th the update image/firmware for your Bluewave 8 HD+ that is downloadable from their official website
Steps:
1. off your tablet and connect it to the computer
2. open the Finless Rom Flash, uncheck all the boxes
3. turn ON your Tablet (be attentive) and while the blue screen is starting you may NOTICE that the ROM FLASH TOOL detected your device, it says "RKAndroid Mass Storage USB". when you have read that, press immediately the "Reboot Flash mode" and your device will in black screen. but ROM Flash tool still detected your device as "RKAndroid Mass Storage USB "
4. Open the Batch Tool, (you must know how to use it) find your image, then you will notice that the CONNECTED DEVICES below have color green, in that case you may now Click UPGRADE. wait for a minute and booooom, you device is functionable again.
have a feedback if it is helpful.
P.S.
before I go to that steps, when I am stuck in RECOVERY MODE of my device, I Click the Recover from BACKUP then my tablet restarts and it turns to BOOTLOOP and repeatedly saying NO COMMAND.
PLDC said:
first thing to do is make sure that you have already installed the rkchip_usb driver in your computer.
What are the requirements?
1st of course your Tablet and Cable Connector
2nd Finless ROM Flash Tool v1.37
3rd Rokchip BatchTool v1.7
4th the update image/firmware for your Bluewave 8 HD+ that is downloadable from their official website
Steps:
1. off your tablet and connect it to the computer
2. open the Finless Rom Flash, uncheck all the boxes
3. turn ON your Tablet (be attentive) and while the blue screen is starting you may NOTICE that the ROM FLASH TOOL detected your device, it says "RKAndroid Mass Storage USB". when you have read that, press immediately the "Reboot Flash mode" and your device will in black screen. but ROM Flash tool still detected your device as "RKAndroid Mass Storage USB "
4. Open the Batch Tool, (you must know how to use it) find your image, then you will notice that the CONNECTED DEVICES below have color green, in that case you may now Click UPGRADE. wait for a minute and booooom, you device is functionable again.
have a feedback if it is helpful.
P.S.
before I go to that steps, when I am stuck in RECOVERY MODE of my device, I Click the Recover from BACKUP then my tablet restarts and it turns to BOOTLOOP and repeatedly saying NO COMMAND.
Click to expand...
Click to collapse
Why is it, when I do this, my tablet can't be detected by the software? I'm stuck on recovery mode. When it's on the blue logo, still does nothing.
I can only see my device when I look for it on Device Manager under Android Phone. Why is that? It doesn't show the "Other Devices". I've installed the driver but to no avail, still fails me. Please help. Thanks!
Related
I need some serious help... I think I bricked my Nextbook Premium 7. I compiled a custom ROM and forgot to included a launcher. Didn't realize it until after I flashed it. My tablet is stuck in a bootloop and only way to shut it down is with the reset [pin hole] button. Power button does nothing except start it up. I have already tried to put the stock update.img on an external SD hoping it would boot from there, but it did not. I am not sure what to do next, I have looked all over google and xda. Please help!
Thank you in advance!
Do you have a custom recovery installed? Did you try installing it threw fastboot files and cmd prompt on computer?
Please hit the thank you button if i helped!
techno-update said:
Do you have a custom recovery installed? Did you try installing it threw fastboot files and cmd prompt on computer?
Please hit the thank you button if i helped!
Click to expand...
Click to collapse
There ins't a custom recovery installed, this device flashes by detecting an update.img and askes to install it. It doesn't get past what would be considered the kernel screen. This tablet doesn't work like a standard android phone. There are no hard buttons except the power button, so attempting to get into any recovery is not possible. It also doen't boot enough to add any files to it.
Sounds like your screwed. Sorry.....
Please hit the thank you button if i helped!
check out this link
http://forum.xda-developers.com/showthread.php?t=1410862&page=9
Ok, just bricked my Nextbook 7
Here is how I flashed a firmware without access to recovery:
If you are in a bootloop, Connect USB and Power.
Press and hold pin on back until you hear windows try to detect a device but the screen is off.
Download this: http://arctablet.com/assets/tools/Fi..._Tool_v1.4.zip
Install the driver from the drivers folder.
3. Installing the drivers on the computer
Following the tablet entering in recovery mode, the computer should now show it has found a new USB device and prompt for a device driver. Select the appropriate driver in the driver directory from the Rockchip Flash Tool 1.4 package.
It will then install the driver for RK29 Device
4. Sending the firmware to the tablet
The flashing tool should display a green square around the number 1 in the lower left area of the Windows application.
Select the firmware file to flash using the button in the top right area of the application. Select the update.img file from here:
http://www.multiupload.com/NQHSNZJSO2
Then push the Upgrade button to transfer the selected firmware to the tablet.
The firmware will be copied to the tablet, a progression counter will go from 0% to 100% on this step, followed by a verification.
You are done, let the tablet reboot and update itself. It should take a few minutes for the flash process to finish.
This procedure has been successfully tested on Windows XP 32 bits for flashing a bricked NextBook 7 Premium YF1011 (but should work on others)
Help !!
Please help, got the tablet yesterday NEXT7P12 YF091211085 by flashing the official site was a brick, the tablet will not turn on, the computer does not see it.
screen moved after installing rom
Hi, i don't know if I'm on the right place but if anyone can help me, please I haw the Nextbook 7 premium and have instaled costum rom on it, but after rebooting my screen position has moved from right to left 2 cm and from up to down 1 cm , so my screen is moved I don't know why I have try to install 3 other rom and factory firmware but the screen is still moved or should I say cut. Any ideas? please I have try to google it but no luck...
I no longer have my np7 but I did try just about every ROM for it. Never have I had or seen an issue like this, and in truth I can't think of what the issue may be.
There are different np7 variants and some don't play nice with custom ROMs (built sept 2012 and older lose WiFi) so you might have a model that can only use one software due to hardware/firmware change.
There never was much development for the np7 here, I think finlessbob and others are still working on it at freaktab.com maybe see if they can help
Sent from my Nexus 4 using xda premium
d33dvb said:
Ok, just bricked my Nextbook 7
Here is how I flashed a firmware without access to recovery:
If you are in a bootloop, Connect USB and Power.
Press and hold pin on back until you hear windows try to detect a device but the screen is off.
Download this: http://arctablet.com/assets/tools/Fi..._Tool_v1.4.zip
Install the driver from the drivers folder.
3. Installing the drivers on the computer
Following the tablet entering in recovery mode, the computer should now show it has found a new USB device and prompt for a device driver. Select the appropriate driver in the driver directory from the Rockchip Flash Tool 1.4 package.
It will then install the driver for RK29 Device
4. Sending the firmware to the tablet
The flashing tool should display a green square around the number 1 in the lower left area of the Windows application.
Select the firmware file to flash using the button in the top right area of the application. Select the update.img file from here:
http://www.multiupload.com/NQHSNZJSO2
Then push the Upgrade button to transfer the selected firmware to the tablet.
The firmware will be copied to the tablet, a progression counter will go from 0% to 100% on this step, followed by a verification.
You are done, let the tablet reboot and update itself. It should take a few minutes for the flash process to finish.
This procedure has been successfully tested on Windows XP 32 bits for flashing a bricked NextBook 7 Premium YF1011 (but should work on others)
Click to expand...
Click to collapse
Your link not working? Send alternative link please!
I have bought a second-hand Galaxy Tab which will not keep changes in settings or any uploaded files or IDs after switch off and restart.
This means I cannot root it, as any uploaded files with Odin are lost on restart.
Can anyone help me please? I have tried all the usual resets to no avail.
FG
No-one interested in a tricky problem challenge???
ForeignGadger said:
I have bought a second-hand Galaxy Tab which will not keep changes in settings or any uploaded files or IDs after switch off and restart.
This means I cannot root it, as any uploaded files with Odin are lost on restart.
Can anyone help me please? I have tried all the usual resets to no avail.
FG
Click to expand...
Click to collapse
Hmm, I thought this might intrigue the experts, but to no avail.
Where the hell do I go for an answer to this problem: rooting cannot be done as flashed files will be lost on reboot.
ForeignGadger said:
Hmm, I thought this might intrigue the experts, but to no avail.
Where the hell do I go for an answer to this problem: rooting cannot be done as flashed files will be lost on reboot.
Click to expand...
Click to collapse
Hmm have you really odined and see the files replaced? Can you boot into recovery do a full wipe and odin a stock or custom rom
Sent from my GT-P7510 using Tapatalk
animatechnica said:
Hmm have you really odined and see the files replaced? Can you boot into recovery do a full wipe and odin a stock or custom rom
Sent from my GT-P7510 using Tapatalk
Click to expand...
Click to collapse
Hi. Thanks for getting back.
I have gone up and down the forums for ideas. (for over 3 days now).
The story so far:
I have tried to flash the overcome .tar file for my model using odin 1.83, but get a red box and a Fail! : error 0X140005. I followed the Overcome guide VERY carefully, got the yellow COM box, put the right file in the right box, but when I hit the start button, it fails.
I can boot into "Download". I have tried restore after wiping the cache.
With normal power up, the OS seems to work partially, in that I can do all the things I want to do, but all the settings, WiFi passwords, uploaded files etc disappear on reboot, and any uninstalled programmes re-appear. It seems that it won't permanently write to, or erase from, "long term" memory.
Before this,I have done a full cache wipe and factory restore but no difference.
Thoughts:
a) I am wondering if a previous occupant has tinkered with it and messed up the memory partitions? is it all RAM?
b) As it is stuck, it is stuck with USB debugging disabled. this will be maintained on reboot: could this interfere with Odin?
Any suggestions would be very, very gratefully accepted.
FG
ForeignGadger said:
Hi. Thanks for getting back.
I have gone up and down the forums for ideas. (for over 3 days now).
The story so far:
I have tried to flash the overcome .tar file for my model using odin 1.83, but get a red box and a Fail! : error 0X140005. I followed the Overcome guide VERY carefully, got the yellow COM box, put the right file in the right box, but when I hit the start button, it fails.
I can boot into "Download". I have tried restore after wiping the cache.
With normal power up, the OS seems to work partially, in that I can do all the things I want to do, but all the settings, WiFi passwords, uploaded files etc disappear on reboot, and any uninstalled programmes re-appear. It seems that it won't permanently write to, or erase from, "long term" memory.
Before this,I have done a full cache wipe and factory restore but no difference.
Thoughts:
a) I am wondering if a previous occupant has tinkered with it and messed up the memory partitions? is it all RAM?
b) As it is stuck, it is stuck with USB debugging disabled. this will be maintained on reboot: could this interfere with Odin?
Any suggestions would be very, very gratefully accepted.
FG
Click to expand...
Click to collapse
Dude i ask this in another forum you posted, did you use odin to install recovery or not? if you did then just boot into recovery and wipe all - then flash galaxytab or any flashable roms that way.
Sent from my GT-P7510 using Tapatalk
As I said in the second paragraph: I tried to use odin to install recovery, but got the big red square. The file did not transfer.
ForeignGadger said:
As I said in the second paragraph: I tried to use odin to install recovery, but got the big red square. The file did not transfer.
Click to expand...
Click to collapse
No your second paragraph said you flashed overcome. Not recovery
So if odin is not installing recovery can you boot into fastboot? Power off then press power n volume down then go to fastboot mode and install recovery that way. Check this thread for info. . http://www.galaxytabforums.net/forum/galaxy-tab-10-1-general-discussions/1044-my-galaxy-tab-10-1-wont-power-up.html
Then flash a cwm flashable ROM
Sent from my GT-P7510 using Tapatalk
OK, thanks for the steer and your patience. I'll get to work.
I'll report back (eventually!).
(Please remember that there is an awful lot of jargon and TLA's to learn for us newcomers, even if willing).
Regards, FG
ForeignGadger said:
OK, thanks for the steer and your patience. I'll get to work.
I'll report back (eventually!).
(Please remember that there is an awful lot of jargon and TLA's to learn for us newcomers, even if willing).
Regards, FG
Click to expand...
Click to collapse
Lol i hear you i was there too
Sent from my GT-P7510 using Tapatalk
animatechnica said:
Lol i hear you i was there too
Sent from my GT-P7510 using Tapatalk
Click to expand...
Click to collapse
hi again; well no success so far.
- I downloaded and installed SDK (software development kit: for other noobs like me)
- I downloaded and installed recovery.img, and installed the google USB drivers from the extras
- I checked that the fastboot.exe, adb.exe (android debug bridge) and recovery.img were all in the platform tools folder.
- got into "download":- odin mode
- plugged in the tab and tried to launch "adb start-server" from cmd screen
(I was in the right directory at the command line), but no cigar: nada.
- I went back and did the PDAnet routine, but still no joy, no devices shown
there were no error messages either, which made me think the usb was not communicating with the tab.
To try this out I used Kies to transfer a photo file to the tab, and viewed on the tab it after disconnecting, so tranfers do take place.
Sure enough, after rebooting, the file was gone, like all the other settings and changes made in the past.
I also tried adb when the tablet was on and I had checked usb debugging. In this case, adb recognised the device and returned the serial number.
It does not do this when in cwm mode as it will not remember to keep debugging on when I power down.
Any other ideas anyone? can I switch debugging on from the command line before I try to recover?
FG, (now getting a sore head and worrying if I have p***d my money up the wall.)
Funny, when things get really tough, the helpers disappear.
Still no solution.
Oh dear: silence again.
ForeignGadger said:
- got into "download":- odin mode
- plugged in the tab and tried to launch "adb start-server" from cmd screen
(I was in the right directory at the command line), but no cigar: nada.
- I went back and did the PDAnet routine, but still no joy, no devices shown
there were no error messages either, which made me think the usb was not communicating with the tab.
To try this out I used Kies to transfer a photo file to the tab, and viewed on the tab it after disconnecting, so tranfers do take place.
Sure enough, after rebooting, the file was gone, like all the other settings and changes made in the past.
I also tried adb when the tablet was on and I had checked usb debugging. In this case, adb recognised the device and returned the serial number.
It does not do this when in cwm mode as it will not remember to keep debugging on when I power down.
Any other ideas anyone? can I switch debugging on from the command line before I try to recover?
FG, (now getting a sore head and worrying if I have p***d my money up the wall.)
Click to expand...
Click to collapse
AFAIK you won't get a response in ADB when the tablet is in download mode but you should when the tablet is in CWM recovery mode.
If it were me I'd odin a stock factory recovery to the device and a stock factory rom for it. Then i'd boot into stock recovery and do the factory reset to see if that cleans things up. You should probably link to the source of the files you're downloading as well as provide specific model of your device so people can verify that you're flashing the right files.
I'm totally confused by your steps here
you went to odin mode and used adb? or did you go into fastboot and adb the recovery?
step by step here
a quick overview of it is to get your tab into ODIN mode and use ODIN to reload a copy of the stock image to your tab. This erases all of your previous data but you can reinstall those later. But at least it gets you back to a working tab - Note this is for the 7510 - the wifi tab
1) Download this file - MEGAUPLOAD - The leading online storage and file delivery service
2) extract the file
you should have the following
a file called GT-P7510_USB_Driver_v1_3_2360_0-Escape - this file is the USB driver for your PC, if you don't have the driver installed already, run this
a folder named Odin3 v1.85 - this contains the ODIN executable file
a folder named KME Odin - which contains 2 files - android_fastboot_emmc_full_p4_16G_32G.pit" and a "P7510XABKME_P7510UEKME_HOME.tar"
3) Power down the tab
4) press POWER and Volume Down at the same time until it powers up and you should see 2 logos - USB and triangle (note the retail wifi version might show 2 different logos, android on right and bag on left - left is recovery and right is Odin/download)
5) press volume down to move the selection to the triangle (or the icon on the right)
6) press volume up to lock in selection. You are now in ODIN/download mode
assuming all your drivers are installed to your PC, plug in the tab via the USB to your PC
run the ODIN executable
only Auto-reboot and F.reset Time should be ticked
after a minute, the ID:Com box should turn yellow -if not you may have driver issues (try this driver http://drivers.softpedia.com/progDo...SB-Driver-for-Windows-x86-Download-96692.html)
7) tick PDA and click the PDA button and navigate to the KME Odin folder and select "P7510XABKME_P7510UEKME_HOME.tar"
8) select the PIT button and navigate to the KME Odin folder and select the "android_fastboot_emmc_full_p4_16G_32G.pit"
9) Select START
it should start writing the image to your tab and once done, should reboot you back into stock
in case you want to go ahead and flash 3.2 -
use this pit file - http://forum.xda-developers.com/attachment.php?attachmentid=784889&d=1321486916
and use this for the PDA http://hotfile.com/dl/135008863/06c...EKMM_P7510XABKMM_P7510UEKMM.rar.html?expire=1
if it asks you for Password for the 3,2 file use : sampro.pl
when resorting to odin and first booting up, you might get asked for a password, the way around this is to
a) power off,
b) press power n volume down until you get 2 icons left is recovery right is download.
c) press volume down to select recovery icon then volume up to lock it, you should then see the recovery menu
d) then use volume buttons until wipe data/factory reset is highlighted press power to do it
e)after its done wiping, select reboot n you should be ready
Now the key thing here is installing the right drivers - after installing teh driver, connect the tab and see if the drivers are installed - go to your pc control panel and check if you get a triangle with an exclamation point. If there is, right click on it and select update driver, then manually choose device - navigate through and find the Android or samsung device (cant remember the name off the top of my head)
if you get stuck, report on which part you got stuck on - currently it seems like you're mixing and matching different steps so it is a little confusing
ForeignGadger said:
hi again; well no success so far.
- I downloaded and installed SDK (software development kit: for other noobs like me)
- I downloaded and installed recovery.img, and installed the google USB drivers from the extras
- I checked that the fastboot.exe, adb.exe (android debug bridge) and recovery.img were all in the platform tools folder.
- got into "download":- odin mode
- plugged in the tab and tried to launch "adb start-server" from cmd screen
(I was in the right directory at the command line), but no cigar: nada.
- I went back and did the PDAnet routine, but still no joy, no devices shown
there were no error messages either, which made me think the usb was not communicating with the tab.
To try this out I used Kies to transfer a photo file to the tab, and viewed on the tab it after disconnecting, so tranfers do take place.
Sure enough, after rebooting, the file was gone, like all the other settings and changes made in the past.
I also tried adb when the tablet was on and I had checked usb debugging. In this case, adb recognised the device and returned the serial number.
It does not do this when in cwm mode as it will not remember to keep debugging on when I power down.
Any other ideas anyone? can I switch debugging on from the command line before I try to recover?
FG, (now getting a sore head and worrying if I have p***d my money up the wall.)
Click to expand...
Click to collapse
Hi again, sorry to confuse you but I was following your suggestions in post #7 of this thread. when I got to step 5 of that post, I got no response from the device: installed PDAnet to get over the driver issue. and no joy.
When trying to install .tar or PIT files I get a big red box, even though the yellow COM box looks good.
When trying the data erase/ factory reset option in the "Download" mode, I get the error message "Can't access to /system/csc/XEU/system.
Steps 7/8/9 in your post above do not work: I have tried them a few times.
Sorry, I have run out of options, and thank you for your help.
first off, i just wanted to state, before i get ripped into, i have spend the last 1.5 days reading everything i can find on any forum that comes back with search results for my issue. i've tried numerous drivers, different PC's, even a Linux Live CD system.
I cannot get my PC (win 7, 32 bit) to see my TF201 via ADB.
It is installed in the device manager with the "universal naked driver 0.7", and shows up as "Asus Transformer Prime ADB Interface". But whenever i try to connect via ADB to run the fix in this thread - http://forum.xda-developers.com/showthread.php?t=1514088 - i cannot see the device.
I have tried all of the mount/unmount options in CWM. nothing is working for me.
is there anyone that has run into this? And if so, have you found a resolution?
sorry if i'm coming off as the typical noob here, but i really have put in time researching the issue and attempting other fix-it routes before posting up a help thread.
Thanks!!
perch_44 said:
first off, i just wanted to state, before i get ripped into, i have spend the last 1.5 days reading everything i can find on any forum that comes back with search results for my issue. i've tried numerous drivers, different PC's, even a Linux Live CD system.
I cannot get my PC (win 7, 32 bit) to see my TF201 via ADB.
It is installed in the device manager with the "universal naked driver 0.7", and shows up as "Asus Transformer Prime ADB Interface". But whenever i try to connect via ADB to run the fix in this thread - http://forum.xda-developers.com/showthread.php?t=1514088 - i cannot see the device.
I have tried all of the mount/unmount options in CWM. nothing is working for me.
is there anyone that has run into this? And if so, have you found a resolution?
sorry if i'm coming off as the typical noob here, but i really have put in time researching the issue and attempting other fix-it routes before posting up a help thread.
Thanks!!
Click to expand...
Click to collapse
Update****
I was able to get it out of the boot loop, so that it will boot to the splash screen. well following instructions i've found online, when in CWM, i connected through ADB and pushed a copy of cm9.zip up to the internal storage.
yet, whenever i choose "install from zip" in CWM, it never finds the zip file.
i have done it a few times now and it says it copies up completely, but never actually shows up.
syntax i'm using: adb push cm9filename.zip "/sdcard/cm9filename.zip"
it takes about two minutes and gives me confirmation that it pushed x amount of bytes of data for the file, and says its done. I then go back to the tablet in CWM and choose install from sdcard, and it says there are no files.
I'm about ready to throw this thing in the trash and be done with it......
First of all make a small text file and zip it up for a test file that wont take long to push.
Now type adb push test.zip /data/media/
look if the file is showing where you go to install a rom.
If it is showing then push the rom to the same place then install it
flumpster said:
First of all make a small text file and zip it up for a test file that wont take long to push.
Now type adb push test.zip /data/media/
look if the file is showing where you go to install a rom.
If it is showing then push the rom to the same place then install it
Click to expand...
Click to collapse
If that fails, I had the same issue with cwm, I installed twrp via fastboot and haven't had the problem of the file not showing up after adb push. Fustrating I know.... I tired everything I could think of in cwm multiple reboots different usb ports... on an on......
Please HELP CWM Roocovery Loop!!!
perch_44 said:
Update****
I was able to get it out of the boot loop, so that it will boot to the splash screen. well following instructions i've found online, when in CWM, i connected through ADB and pushed a copy of cm9.zip up to the internal storage.
yet, whenever i choose "install from zip" in CWM, it never finds the zip file.
i have done it a few times now and it says it copies up completely, but never actually shows up.
syntax i'm using: adb push cm9filename.zip "/sdcard/cm9filename.zip"
it takes about two minutes and gives me confirmation that it pushed x amount of bytes of data for the file, and says its done. I then go back to the tablet in CWM and choose install from sdcard, and it says there are no files.
I'm about ready to throw this thing in the trash and be done with it......
Click to expand...
Click to collapse
I am having the same exact problem. It started when I tried to restore my stock backup that I made using CWM 5.8.2.0 coming from the CM rom. I am stuck in the CWM recovery screen and cant get ADB to see the TF Prime. I just get error: device not found. How did you manage to push a zip if ADB wasn't seeing your device? I have been looking for a fix for the last week now.
Forget CWM fastboot flash TWRP then load your rom via microsd.....
Danny80y said:
Forget CWM fastboot flash TWRP then load your rom via microsd.....
Click to expand...
Click to collapse
How do I flash TWRP when Im stuck CWM?
hellshavoc said:
How do I flash TWRP when Im stuck CWM?
Click to expand...
Click to collapse
The answer is in the post you quote, did you read it? Fastboot, see on twrp site.
Striatum_bdr said:
The answer is in the post you quote, did you read it? Fastboot, see on twrp site.
Click to expand...
Click to collapse
the problem is whenever it try to fastboot it just keeps saying waiting for device. I can put my TF prime in fastoot mode when I power on while holding down on vol it just goes right to CWM recovery and any adb command gives me no device found and I tried APX mode (holding vol up during power on) and tried to use NVFlash but that just gives me an error device not recognized. I have all the drivers installed. I used the naked drivers .7 and have cleared out all the old drivers too.
hellshavoc said:
the problem is whenever it try to fastboot it just keeps saying waiting for device. I can put my TF prime in fastoot mode when I power on while holding down on vol it just goes right to CWM recovery and any adb command gives me no device found and I tried APX mode (holding vol up during power on) and tried to use NVFlash but that just gives me an error device not recognized. I have all the drivers installed. I used the naked drivers .7 and have cleared out all the old drivers too.
Click to expand...
Click to collapse
you hold the volume down until the screen starts, then you let go and wait
whycali said:
you hold the volume down until the screen starts, then you let go and wait
Click to expand...
Click to collapse
As I stated above holding down Val down while turning on does not bring up the menu it still just boots right into CWM recovery. i have no option for fastboot or anything.
hellshavoc said:
As I stated above holding down Val down while turning on does not bring up the menu it still just boots right into CWM recovery. i have no option for fastboot or anything.
Click to expand...
Click to collapse
No, you hold Vol down + power then when the first screen with sentences appears you release everything DON'T touch anything, after 5 secondes you will end in a screen with three icons, with volume down youu select the usb icon in the middle, then volume up.
This procedure works even on locked devices except that in this case you don't have the usb icon, only the factory reset and cold reboot ones. So it's impossible you don't obtai this screen, it's hardware coded.
It is confusing but just keep trying till you get it!! Once there go to the TWRP site they have the file and the fastboot commands all set in a guide.
I have exactly the same problem than you.
I had the fastboot/adb connection (I used to push the rom by adb), but i tried to install a wrong version on gapps. Since then, I'm stock in the recovery mode without adb/fastboot connection.
If you find a solution for that, pleaze post it !!
Striatum_bdr said:
No, you hold Vol down + power then when the first screen with sentences appears you release everything DON'T touch anything, after 5 secondes you will end in a screen with three icons, with volume down youu select the usb icon in the middle, then volume up.
This procedure works even on locked devices except that in this case you don't have the usb icon, only the factory reset and cold reboot ones. So it's impossible you don't obtai this screen, it's hardware coded.
Click to expand...
Click to collapse
I've got this new MyPhone A858 Duo, a dual-sim phone with 1Ghz processor from the Philippines.
I've tried rooting it using SuperOneClick 2.3.3.0, UnlockRoot 2.3.1 and Gingerbreak, but it seems that all failed in rooting this new android phone.
Any idea how to root this phone will be greatly appreciated.
TIA
bedodot said:
I've got this new MyPhone A858 Duo, a dual-sim phone with 1Ghz processor from the Philippines.
I've tried rooting it using SuperOneClick 2.3.3.0, UnlockRoot 2.3.1 and Gingerbreak, but it seems that all failed in rooting this new android phone.
Any idea how to root this phone will be greatly appreciated.
TIA
Click to expand...
Click to collapse
I'm bumping this because I'm planning to get the exact the same phone.
Bumping this one as well.
BUMP!
ROOT!!!
Damn, can someone please root or tell how to root this.... Also, I want a new custom ROM..... I WANT IT SO BAAAAD!!!!:highfive::highfive:
Rooting Myphone A858
Bump for this one. Please help us
try using zhuodashi
[SOLVED] rooting a858
1. Install Android USB Driver (PDAnet).
Windows XP/Vista/7 32-bit --- http://pdanet.co/bin/PdaNetA350.exe
Windows Vista/7 64-bit --- http://pdanet.co/bin/PdaNetA350x64.exe
2. Turn off your phone. Then connect your phone via usb data cable.
[ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is.
[ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
NOTE: If nothing happens after plugging then boot to recovery by PRESSING HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files http://d01.megashares.com/dl/xuN9uOq/SP_Flash_Tool_exe_v2.1140.0.zip to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading. See image below.
http://img833.imageshack.us/img833/6559/78333114.png
4. Look and find the scatter text file http://www.mediafire.com/?y7nd8sd5canxkr5 and open it. See image below.
http://img337.imageshack.us/img337/3639/17602446.png
5. Ignore and tick OK. See image below.
http://img826.imageshack.us/img826/6638/69831501.png
6. Check the box with the name "Recovery". Then look for the downloaded recovery file http://d01.megashares.com/dl/UiC2KlY/recovery.img And open it. See image below.
http://img27.imageshack.us/img27/3097/56761975.png
http://img339.imageshack.us/img339/320/48823847.png
7. Tick Option from the menu and check USB Mode. See image below.
http://img521.imageshack.us/img521/391/48354908.png
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked. See image below
http://img692.imageshack.us/img692/5207/95347966q.png
9. Plug your cellphone via your usb cable. Then wait for it to be finish. See image below.
http://img856.imageshack.us/img856/8315/48740804.png
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2.
10. A yellow bar will appear. Wait for it to reach 100%. See image below.
http://img831.imageshack.us/img831/3964/57052207.png
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
12. Now it's time to root your phone by following the next tutorial below.
MAKE SURE YOU HAVE DONE SUCCESSFULLY THE STEPS ABOVE BEFORE PROCEEDING BELOW
1. Copy and paste root_MP858Duo.zip http://d01.megashares.com/dl/tPWGVHo/root_MP858Duo.zip to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard.
4. Choose zip from sdcard.
5. Choose root_MP858Duo.zip. Then confirm update.
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
Does Not Work
isfahan27 said:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
...
Click to expand...
Click to collapse
I've heard this works for other people. With my phone it doesn't. When I plug it in, it doesn't show an unknown device. I've already downloaded and installed MT65xx Preloader and tried out a VCom, but still nothing. I've been going at it for a week, so if anyone's got an answer, advice would be great. Thanks!
Error # 16008
A message came out,
"EBOOT ERROR (16008), [Android] Partition size changed!
[HINT]:
Partial images download error.
The following partitions must be downloaded FULL altogether."
I followed all the steps (and the links) up until I clicked the 'Download' button. :/ When I click download button, that message shows.
I have: My Phone A858, Android 2.3.2 (Gingerbread), Sony Vaio with a Windows 7. Thanks!
Rooting
outerspacekaloy said:
A message came out,
"EBOOT ERROR (16008), [Android] Partition size changed!
[HINT]:
Partial images download error.
The following partitions must be downloaded FULL altogether."
I followed all the steps (and the links) up until I clicked the 'Download' button. :/ When I click download button, that message shows.
I have: My Phone A858, Android 2.3.2 (Gingerbread), Sony Vaio with a Windows 7. Thanks!
Click to expand...
Click to collapse
ok sir.... :good:
one click to root
Hi,
there is a simple way is using one root click.
Try this : http://360dmobile.com/root-1-85-one-click-root-act-now-may-not-last-foreve/
bedodot said:
I've got this new MyPhone A858 Duo, a dual-sim phone with 1Ghz processor from the Philippines.
I've tried rooting it using SuperOneClick 2.3.3.0, UnlockRoot 2.3.1 and Gingerbreak, but it seems that all failed in rooting this new android phone.
Any idea how to root this phone will be greatly appreciated.
TIA
Click to expand...
Click to collapse
You try this video on youtube, because A858 Duo is also Q-Smart S15
http://www.youtube.com/watch?v=BImmgu0-kR0
Download all neccessary things below the video on youtube to root
Good luck!
I tried to root my me302kl by following the first post described in this thread, but it seems I've bricked my tablet
http://forum.xda-developers.com/showthread.php?t=2601837
I have the LTE version, unlocked the bootloader using the apk from Asus, and followed the fastboot method in the first post, and now I'm stuck at the Asus logo on startup. I'm trying to factory reset by using the update download from the Asus website, but when i try
fastboot erase cache
fastboot erase system
fastboot flash update US_ME302C-V4.7.3-0-ota-user.zip
it fails with this:
writing 'update'...
FAILED (remote: partition table doesn't exist)
Then I tried following perpe's advice but both methods did not work
Download the update zip for your device and sku from ASUS. Unpack it once, there should be a second zip, try to flash it with
fastboot update name-of-your.zip
if this doesn't wotk, then copy the update zip to an external sd card. Your sd card should be formated in far32. Place the card into the tablets sd card. Press Volume UP + Power to boot it into the bootloader, it should flash it automatically, if not look if yor bootloader has a menu entry "sd download..." select it with the volume keys and power.
Click to expand...
Click to collapse
When booting into recovery mode, I get the dead android robot icon, regardless of whether the .zip file is on the SD card or not. I've also tried making a system.img file out of the system folder from the extracted zip file and flashing that with fastboot flash system system.img and fastboot flash boot boot.img, but that didn't work either.
Any kind soul have advice on how to make use of the official Asus OTA .zip file, or perhaps be able to supply some .img backups for me to make use of?
EDIT
Found out that to get the recovery menu to show up, you have to hold the power button and press volume up. I thought that the menu would show up automatically so I got confused. ADB sideloaded the Asus OTA .zip and everything is back to normal
Hello
How to flash oryginal soft on this tablet. Can you help with this ?
I tried SDK and wiped all system but now i cannot flash the system. How should i do it ?
I have firmware fros ASUS page and now what?
I tried fastboot flash update... but i have measege that unknown partition and cannot determinate image file name. What im doing wrong?
Thanks!
Lenino83 said:
Hello
How to flash oryginal soft on this tablet. Can you help with this ?
I tried SDK and wiped all system but now i cannot flash the system. How should i do it ?
I have firmware fros ASUS page and now what?
I tried fastboot flash update... but i have measege that unknown partition and cannot determinate image file name. What im doing wrong?
Thanks!
Click to expand...
Click to collapse
download the OTA zip from the asus website
unzip once, you should have another zip
power on the tablet while holding volume up to boot into recovery mode
after the android robot shows up, hold volume up and press the power button to get the recovery menu to show
install the zip using adb sideload
using adb sideload will differ depending on what OS you're using. you can google to find out more specific instructions for that because it's a little more work to get it for windows. for OSX if you have homebrew, you can just 'brew install android' and it will install all the android tools for you.
once you have adb installed, in the terminal type 'adb sideload pathname_of_zip.zip' and it will restore your device to factory settings
I had the same problem and your trick saved me from sending it back. I am not sure if i would have send it back as I have yet to brick something since I am playing with android back in the days of Viewsonic gtablet. We are stuck with 4.2.
Sent from my T0LTE using Tapatalk
help
tkuichooseyou said:
Found out that to get the recovery menu to show up, you have to hold the power button and press volume up. I thought that the menu would show up automatically so I got confused. ADB sideloaded the Asus OTA .zip and everything is back to normal
Click to expand...
Click to collapse
hello
got like the same problem.. dead robot, no boot, in recovery does not want to update from ota file.
Can u explain please how to ADB sideload ota.zip?
What I need, drivers and step by step?
I tried but I get no device in adb
Thank you:crying:
ionratiu2000 said:
hello
got like the same problem.. dead robot, no boot, in recovery does not want to update from ota file.
Can u explain please how to ADB sideload ota.zip?
What I need, drivers and step by step?
I tried but I get no device in adb
Thank you:crying:
Click to expand...
Click to collapse
You have to download adb or android sdk, or google how to install adb. Once you have installed the adb, hold the power button, and either Volume UP or down to put tablet into bootlfash recovery mode. Once you have it in recovery mode, push volume up or down to get into true recovery mode.
There you would see adb sideload.
Download US or WWW files from Asus website, and unzip the file into ADB directory or whatever path. then type adb sideload name of the file.
Please read the 1st post by OP on this thread twice or three times, and it tells you how to get your tablet back from brink.
back
rob_z11 said:
You have to download adb or android sdk, or google how to install adb. Once you have installed the adb, hold the power button, and either Volume UP or down to put tablet into bootlfash recovery mode. Once you have it in recovery mode, push volume up or down to get into true recovery mode.
There you would see adb sideload.
Download US or WWW files from Asus website, and unzip the file into ADB directory or whatever path. then type adb sideload name of the file.
Please read the 1st post by OP on this thread twice or three times, and it tells you how to get your tablet back from brink.
Click to expand...
Click to collapse
Got it. Done! the tablet is running again, but I encounter another issue
I have no permission to write internal sd.
I cant touch internal, some apps that require writing don't work (play store, camera, etc) I cant root, unlock or do anything that require w permissions.
Any way to fix that?
Or I have to wait for a CWM and rom image ?
ionratiu2000 said:
Got it. Done! the tablet is running again, but I encounter another issue
I have no permission to write internal sd.
I cant touch internal, some apps that require writing don't work (play store, camera, etc) I cant root, unlock or do anything that require w permissions.
Any way to fix that?
Or I have to wait for a CWM and rom image ?
Click to expand...
Click to collapse
You can download king's root or something which is a window app, and it does give your tablet root. I am not exactly sure about the name, but would let you know once I have access to my laptop.
Sent from my T0LTE using Tapatalk
ASUS MEMO PAD FHD10 ME302KL frozen logo screen
I have problem with my asus memo pad 10. It just shows asus logo startup screen and nothing more and it have no reaction with anything I do.
Please help!
I can't boot into recovery mode, but there is no problem to boot into fastboot mode!
Could anyone provide stock recovery file or link? Then I can flash recovery and do the adb sideload.
Thanks!!