I've got this new MyPhone A858 Duo, a dual-sim phone with 1Ghz processor from the Philippines.
I've tried rooting it using SuperOneClick 2.3.3.0, UnlockRoot 2.3.1 and Gingerbreak, but it seems that all failed in rooting this new android phone.
Any idea how to root this phone will be greatly appreciated.
TIA
bedodot said:
I've got this new MyPhone A858 Duo, a dual-sim phone with 1Ghz processor from the Philippines.
I've tried rooting it using SuperOneClick 2.3.3.0, UnlockRoot 2.3.1 and Gingerbreak, but it seems that all failed in rooting this new android phone.
Any idea how to root this phone will be greatly appreciated.
TIA
Click to expand...
Click to collapse
I'm bumping this because I'm planning to get the exact the same phone.
Bumping this one as well.
BUMP!
ROOT!!!
Damn, can someone please root or tell how to root this.... Also, I want a new custom ROM..... I WANT IT SO BAAAAD!!!!:highfive::highfive:
Rooting Myphone A858
Bump for this one. Please help us
try using zhuodashi
[SOLVED] rooting a858
1. Install Android USB Driver (PDAnet).
Windows XP/Vista/7 32-bit --- http://pdanet.co/bin/PdaNetA350.exe
Windows Vista/7 64-bit --- http://pdanet.co/bin/PdaNetA350x64.exe
2. Turn off your phone. Then connect your phone via usb data cable.
[ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is.
[ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
NOTE: If nothing happens after plugging then boot to recovery by PRESSING HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files http://d01.megashares.com/dl/xuN9uOq/SP_Flash_Tool_exe_v2.1140.0.zip to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading. See image below.
http://img833.imageshack.us/img833/6559/78333114.png
4. Look and find the scatter text file http://www.mediafire.com/?y7nd8sd5canxkr5 and open it. See image below.
http://img337.imageshack.us/img337/3639/17602446.png
5. Ignore and tick OK. See image below.
http://img826.imageshack.us/img826/6638/69831501.png
6. Check the box with the name "Recovery". Then look for the downloaded recovery file http://d01.megashares.com/dl/UiC2KlY/recovery.img And open it. See image below.
http://img27.imageshack.us/img27/3097/56761975.png
http://img339.imageshack.us/img339/320/48823847.png
7. Tick Option from the menu and check USB Mode. See image below.
http://img521.imageshack.us/img521/391/48354908.png
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked. See image below
http://img692.imageshack.us/img692/5207/95347966q.png
9. Plug your cellphone via your usb cable. Then wait for it to be finish. See image below.
http://img856.imageshack.us/img856/8315/48740804.png
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2.
10. A yellow bar will appear. Wait for it to reach 100%. See image below.
http://img831.imageshack.us/img831/3964/57052207.png
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
12. Now it's time to root your phone by following the next tutorial below.
MAKE SURE YOU HAVE DONE SUCCESSFULLY THE STEPS ABOVE BEFORE PROCEEDING BELOW
1. Copy and paste root_MP858Duo.zip http://d01.megashares.com/dl/tPWGVHo/root_MP858Duo.zip to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard.
4. Choose zip from sdcard.
5. Choose root_MP858Duo.zip. Then confirm update.
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
Does Not Work
isfahan27 said:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
...
Click to expand...
Click to collapse
I've heard this works for other people. With my phone it doesn't. When I plug it in, it doesn't show an unknown device. I've already downloaded and installed MT65xx Preloader and tried out a VCom, but still nothing. I've been going at it for a week, so if anyone's got an answer, advice would be great. Thanks!
Error # 16008
A message came out,
"EBOOT ERROR (16008), [Android] Partition size changed!
[HINT]:
Partial images download error.
The following partitions must be downloaded FULL altogether."
I followed all the steps (and the links) up until I clicked the 'Download' button. :/ When I click download button, that message shows.
I have: My Phone A858, Android 2.3.2 (Gingerbread), Sony Vaio with a Windows 7. Thanks!
Rooting
outerspacekaloy said:
A message came out,
"EBOOT ERROR (16008), [Android] Partition size changed!
[HINT]:
Partial images download error.
The following partitions must be downloaded FULL altogether."
I followed all the steps (and the links) up until I clicked the 'Download' button. :/ When I click download button, that message shows.
I have: My Phone A858, Android 2.3.2 (Gingerbread), Sony Vaio with a Windows 7. Thanks!
Click to expand...
Click to collapse
ok sir.... :good:
one click to root
Hi,
there is a simple way is using one root click.
Try this : http://360dmobile.com/root-1-85-one-click-root-act-now-may-not-last-foreve/
bedodot said:
I've got this new MyPhone A858 Duo, a dual-sim phone with 1Ghz processor from the Philippines.
I've tried rooting it using SuperOneClick 2.3.3.0, UnlockRoot 2.3.1 and Gingerbreak, but it seems that all failed in rooting this new android phone.
Any idea how to root this phone will be greatly appreciated.
TIA
Click to expand...
Click to collapse
You try this video on youtube, because A858 Duo is also Q-Smart S15
http://www.youtube.com/watch?v=BImmgu0-kR0
Download all neccessary things below the video on youtube to root
Good luck!
Related
I need some serious help... I think I bricked my Nextbook Premium 7. I compiled a custom ROM and forgot to included a launcher. Didn't realize it until after I flashed it. My tablet is stuck in a bootloop and only way to shut it down is with the reset [pin hole] button. Power button does nothing except start it up. I have already tried to put the stock update.img on an external SD hoping it would boot from there, but it did not. I am not sure what to do next, I have looked all over google and xda. Please help!
Thank you in advance!
Do you have a custom recovery installed? Did you try installing it threw fastboot files and cmd prompt on computer?
Please hit the thank you button if i helped!
techno-update said:
Do you have a custom recovery installed? Did you try installing it threw fastboot files and cmd prompt on computer?
Please hit the thank you button if i helped!
Click to expand...
Click to collapse
There ins't a custom recovery installed, this device flashes by detecting an update.img and askes to install it. It doesn't get past what would be considered the kernel screen. This tablet doesn't work like a standard android phone. There are no hard buttons except the power button, so attempting to get into any recovery is not possible. It also doen't boot enough to add any files to it.
Sounds like your screwed. Sorry.....
Please hit the thank you button if i helped!
check out this link
http://forum.xda-developers.com/showthread.php?t=1410862&page=9
Ok, just bricked my Nextbook 7
Here is how I flashed a firmware without access to recovery:
If you are in a bootloop, Connect USB and Power.
Press and hold pin on back until you hear windows try to detect a device but the screen is off.
Download this: http://arctablet.com/assets/tools/Fi..._Tool_v1.4.zip
Install the driver from the drivers folder.
3. Installing the drivers on the computer
Following the tablet entering in recovery mode, the computer should now show it has found a new USB device and prompt for a device driver. Select the appropriate driver in the driver directory from the Rockchip Flash Tool 1.4 package.
It will then install the driver for RK29 Device
4. Sending the firmware to the tablet
The flashing tool should display a green square around the number 1 in the lower left area of the Windows application.
Select the firmware file to flash using the button in the top right area of the application. Select the update.img file from here:
http://www.multiupload.com/NQHSNZJSO2
Then push the Upgrade button to transfer the selected firmware to the tablet.
The firmware will be copied to the tablet, a progression counter will go from 0% to 100% on this step, followed by a verification.
You are done, let the tablet reboot and update itself. It should take a few minutes for the flash process to finish.
This procedure has been successfully tested on Windows XP 32 bits for flashing a bricked NextBook 7 Premium YF1011 (but should work on others)
Help !!
Please help, got the tablet yesterday NEXT7P12 YF091211085 by flashing the official site was a brick, the tablet will not turn on, the computer does not see it.
screen moved after installing rom
Hi, i don't know if I'm on the right place but if anyone can help me, please I haw the Nextbook 7 premium and have instaled costum rom on it, but after rebooting my screen position has moved from right to left 2 cm and from up to down 1 cm , so my screen is moved I don't know why I have try to install 3 other rom and factory firmware but the screen is still moved or should I say cut. Any ideas? please I have try to google it but no luck...
I no longer have my np7 but I did try just about every ROM for it. Never have I had or seen an issue like this, and in truth I can't think of what the issue may be.
There are different np7 variants and some don't play nice with custom ROMs (built sept 2012 and older lose WiFi) so you might have a model that can only use one software due to hardware/firmware change.
There never was much development for the np7 here, I think finlessbob and others are still working on it at freaktab.com maybe see if they can help
Sent from my Nexus 4 using xda premium
d33dvb said:
Ok, just bricked my Nextbook 7
Here is how I flashed a firmware without access to recovery:
If you are in a bootloop, Connect USB and Power.
Press and hold pin on back until you hear windows try to detect a device but the screen is off.
Download this: http://arctablet.com/assets/tools/Fi..._Tool_v1.4.zip
Install the driver from the drivers folder.
3. Installing the drivers on the computer
Following the tablet entering in recovery mode, the computer should now show it has found a new USB device and prompt for a device driver. Select the appropriate driver in the driver directory from the Rockchip Flash Tool 1.4 package.
It will then install the driver for RK29 Device
4. Sending the firmware to the tablet
The flashing tool should display a green square around the number 1 in the lower left area of the Windows application.
Select the firmware file to flash using the button in the top right area of the application. Select the update.img file from here:
http://www.multiupload.com/NQHSNZJSO2
Then push the Upgrade button to transfer the selected firmware to the tablet.
The firmware will be copied to the tablet, a progression counter will go from 0% to 100% on this step, followed by a verification.
You are done, let the tablet reboot and update itself. It should take a few minutes for the flash process to finish.
This procedure has been successfully tested on Windows XP 32 bits for flashing a bricked NextBook 7 Premium YF1011 (but should work on others)
Click to expand...
Click to collapse
Your link not working? Send alternative link please!
hello everyone
how unlock bootloader on a tablet when it is not booting up. restarting again & again after displaying android logo??
anyone has know the method, plz help
thanx
raj1raj said:
hello everyone
how unlock bootloader on a tablet when it is not booting up. restarting again & again after displaying android logo??
anyone has know the method, plz help
thanx
Click to expand...
Click to collapse
You might get more luck if you at least tell people what tablet it is and what you did to get it in such a bad state.
tablet not booting
SimonTS said:
You might get more luck if you at least tell people what tablet it is and what you did to get it in such a bad state.
Click to expand...
Click to collapse
thanks for reply
my device is china MT6572 with android 4.2.2
I have use a very very very superb tool named "MtkDroidTools v2.48" and bricked my newly purchage tablet.
1. I click on root and happy thing is that tablet got rooted. wow
2. I have created backup from this tool and after few minutes, many *.img backup files are created on my pc and my tab's sdcard. wow again
3. After restarting the tab it restarting again & again and not booting. really a "heart attacking wow".
I have tried following steps
1. In default "android stock recovery 3e" trying to restore backup files and got message "installation aborted" everytime. same message from using "adb sideload command"
2. creating a scatter file from this tool and load backup in "SP_Flash_Tool_v5.1343.01" tool. but no any tool connect my tab. it says no device.
3. only "adb sideload" from stock recovery has the way to connect to the pc. but I don't know which kind of files are used at there??
During the backup process a log file created by MtkDroidTools has attached for details information.
then plz tell me. what I do for get again a "relaxed wow"??
Load scatter file and back up files in SP Flash tool. Power your tablet off, hit download button in SP Flash tool then connect tab to pc.
If you have the preloader driver installed SP flash tool should connect and start flashing firmware to phone. Do you hear the connecting sound when you connect powered off tablet to pc? If not, you may need to press and hold Vol Down, Vol up, or menu button while connecting tab to pc.
Hope this helps and good luck!
Sent from my SGH-I337 using xda app-developers app
tablet not booting
SimonTS said:
You might get more luck if you at least tell people what tablet it is and what you did to get it in such a bad state.
Click to expand...
Click to collapse
Klown80 said:
Load scatter file and back up files in SP Flash tool. Power your tablet off, hit download button in SP Flash tool then connect tab to pc.
If you have the preloader driver installed SP flash tool should connect and start flashing firmware to phone. Do you hear the connecting sound when you connect powered off tablet to pc? If not, you may need to press and hold Vol Down, Vol up, or menu button while connecting tab to pc.
Hope this helps and good luck!
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Thanks a lot sir
but my tab has no menu button, only have three hard buttons.
pressing
power + volup = stock recovery
power + voldown= nothing happen
power + volup + voldown = poweroff tab
when I connect the tab to pc in power off mode. The tab automatically startup after a charging logo.
I have preloader drivers on my pc but when turn on the tab. it is appearing in device manager (preloader composite) for only 2-3 seconds. and disconnected. because tablet rebooting again. I can't install preloader drivers in this short time.
plz suggest.
raj1raj said:
Thanks a lot sir
but my tab has no menu button, only have three hard buttons.
pressing
power + volup = stock recovery
power + voldown= nothing happen
power + volup + voldown = poweroff tab
when I connect the tab to pc in power off mode. The tab automatically startup after a charging logo.
I have preloader drivers on my pc but when turn on the tab. it is appearing in device manager (preloader composite) for only 2-3 seconds. and disconnected. because tablet rebooting again. I can't install preloader drivers in this short time.
plz suggest.
Click to expand...
Click to collapse
Ok, no need to hit a combo of buttons, only 1 button you need to press while connecting tab to PC. Please retry following the directions from my last post again
Yes, preloader will only show for a few seconds in device manager before it turns off. Preloader is only for reflashing firmware. When it enables itself, it is looking for the SP FT (or other firmware flashing programs) to be there to catch it, if not preloader shuts itself off.. Your download of SP Flash Tool should have included the needed preloader drivers. Then you load files in SP FT and hit download button then connect tab to PC.
tablet not booting ----solved
Klown80 said:
Ok, no need to hit a combo of buttons, only 1 button you need to press while connecting tab to PC. Please retry following the directions from my last post again
Yes, preloader will only show for a few seconds in device manager before it turns off. Preloader is only for reflashing firmware. When it enables itself, it is looking for the SP FT (or other firmware flashing programs) to be there to catch it, if not preloader shuts itself off.. Your download of SP Flash Tool should have included the needed preloader drivers. Then you load files in SP FT and hit download button then connect tab to PC.
Click to expand...
Click to collapse
Thank you very very very very much. Finally I have got a wow.
After many efforts, I resolved the tablet booting issue. It is possible due to only your valuable suggestion.
steps are here:
1. connect tab to pc & installing preloader usb drivers.
2. getting VID & PID of tablet usb connection.
3. modifying "SP FT settings files" with new values of my tab.
4. creating a scatter file from droid tool & load in SP FT.
5. Flashing backup to the tab successfully.
You are such a genius. I have been wasted a lot of time since a week for getting the right answer. During this period I had connected to many android experts at many sites. but no satisfaction answer.
And u are really amazing. You have got the real problem in only three conversation. really great.
Well I m a windows expert. If u feel any technical problem regarding servers or windows, ask me, I will try my best.
I am launching a website soon named "GeniusPepoleofWorld.com". Many technical experts & genius people will listed there in different categories like Android experts, Windows experts, Linux Experts, Robotics Experts, Electronics xtra xtra. I want to add you at top there in Android Expert list. Now site is under constructions. I want to know your name & personal mail-id like gmail etc. When I will finish my site, I will inform you.
One more thing I want to know that "what is the use of stock recovery & adb sideload, which files types are used with it?"
Plz plz reply this with your name and mail-id.
Thanks a lot again
-----------
Regard
Raj
Sr. Server Engineer
Delhi, India
raj1raj said:
Thank you very very very very much. Finally I have got a wow.
After many efforts, I resolved the tablet booting issue. It is possible due to only your valuable suggestion.
steps are here:
1. connect tab to pc & installing preloader usb drivers.
2. getting VID & PID of tablet usb connection.
3. modifying "SP FT settings files" with new values of my tab.
4. creating a scatter file from droid tool & load in SP FT.
5. Flashing backup to the tab successfully.
You are such a genius. I have been wasted a lot of time since a week for getting the right answer. During this period I had connected to many android experts at many sites. but no satisfaction answer.
And u are really amazing. You have got the real problem in only three conversation. really great.
Well I m a windows expert. If u feel any technical problem regarding servers or windows, ask me, I will try my best.
I am launching a website soon named "GeniusPepoleofWorld.com". Many technical experts & genius people will listed there in different categories like Android experts, Windows experts, Linux Experts, Robotics Experts, Electronics xtra xtra. I want to add you at top there in Android Expert list. Now site is under constructions. I want to know your name & personal mail-id like gmail etc. When I will finish my site, I will inform you.
One more thing I want to know that "what is the use of stock recovery & adb sideload, which files types are used with it?"
Plz plz reply this with your name and mail-id.
Thanks a lot again
-----------
Regard
Raj
Sr. Server Engineer
Delhi, India
Click to expand...
Click to collapse
I am happy to hear it worked for you. Nice job Raj! I am just passing on the knowledge I learned here on XDA (Thank @rua1 he made MTK DroidTools and without that tool alot of folks with MTK devices wouldn't have root, stock firmware back up files, or working recovery
Anyhow, as for your last 2 questions. Stock recovery is used for flashing officially signed update files from your device manufacturer (If they were to make an update that is lol) This is how all android devices are able to accept ota updates, they download the file to phone/tablet then reboot into recovery and then it flashes the downloaded file to the device.
Adb sideload allows you to connect the device to a PC and then upload a firmware file to device to be flashed via recovery instead of downloading it directly to the phone. This is useful if you had an officially signed stock firmware file for your device stored on your pc. Some custom recoveries also allow you to use adb sideload but since you have stock recovery you would be restricted to using only officially signed files.
Say for instance you were not able to get your device to boot properly, you would just need to boot tablet into recovery mode and then choose adb sideload. At this point you would connect tab to PC and then put your firmware file in the same folder you have adb.exe in. (Let's call the firmware file "firmware.zip" in this example) Then open command prompt in same folder that adb.exe is in and type "adb sideload firmware.zip" this would push the firmware.zip file to the device then flash it for you.
Since you were able to use MTK Droidtools to get root then make a back up, you should be able to also use it to make a custom recovery for your device too. When you made the back up, it will usually make 2 back ups, one on your pc that you use SP FT to flash files and restore your device then it also makes a back up on your devices sd card that is flashed through custom recovery to restore your device. This would make restoring your device pretty easy if you need to do so again and it will also allow you to restore without needing a PC to do it.
Hope this helps!
Kevin
raj1raj said:
Thank you very very very very much. Finally I have got a wow.
After many efforts, I resolved the tablet booting issue. It is possible due to only your valuable suggestion.
steps are here:
1. connect tab to pc & installing preloader usb drivers.
2. getting VID & PID of tablet usb connection.
3. modifying "SP FT settings files" with new values of my tab.
4. creating a scatter file from droid tool & load in SP FT.
5. Flashing backup to the tab successfully.
You are such a genius. I have been wasted a lot of time since a week for getting the right answer. During this period I had connected to many android experts at many sites. but no satisfaction answer.
And u are really amazing. You have got the real problem in only three conversation. really great.
Well I m a windows expert. If u feel any technical problem regarding servers or windows, ask me, I will try my best.
I am launching a website soon named "GeniusPepoleofWorld.com". Many technical experts & genius people will listed there in different categories like Android experts, Windows experts, Linux Experts, Robotics Experts, Electronics xtra xtra. I want to add you at top there in Android Expert list. Now site is under constructions. I want to know your name & personal mail-id like gmail etc. When I will finish my site, I will inform you.
One more thing I want to know that "what is the use of stock recovery & adb sideload, which files types are used with it?"
Plz plz reply this with your name and mail-id.
Thanks a lot again
-----------
Regard
Raj
Sr. Server Engineer
Delhi, India
Click to expand...
Click to collapse
I've got the exact same problem with my phone... My phone, Celkon A15 (Indian brand) also has the same chipset number and while trying to root using MTKdroids tool, I have managed to get it in the boot looping stage.
I'm just curious on how you managed to get the pre-loader installed for this? I CAN NOT get the SP Flash tools to detect my phone for the life of me. Also, when I load my scatter file, it has the "PRELOADER" section in RED... and when I try to upload the preloader.bin from my backup files, it says... "Load file "*path name*" fail!"
I am still struggling to understand how the SP Flash tool works and if it would be able to get my phone alive again (well it did help you out, so I am bit optimistic).
Please HELP!
device not booting
kbrahma said:
I've got the exact same problem with my phone... My phone, Celkon A15 (Indian brand) also has the same chipset number and while trying to root using MTKdroids tool, I have managed to get it in the boot looping stage.
I'm just curious on how you managed to get the pre-loader installed for this? I CAN NOT get the SP Flash tools to detect my phone for the life of me. Also, when I load my scatter file, it has the "PRELOADER" section in RED... and when I try to upload the preloader.bin from my backup files, it says... "Load file "*path name*" fail!"
I am still struggling to understand how the SP Flash tool works and if it would be able to get my phone alive again (well it did help you out, so I am bit optimistic).
Please HELP!
Click to expand...
Click to collapse
Hi
1. First you have connect your device to pc.
2. you have to open the device manager and keep your eyes on a new hardware found at device manager, when you start up your device.
3. Preloader will only show for a few seconds in device manager before it turns off.
3. install preloader drivers.
4. open SP Flash tool and load scatter file and set path for your backup files.
5. Click download button and reboot your device.
6. Software will catch your device and finally backup will be restored to your device.
I too have got same problem, i have infocus m2 with mt6582, i rooted with kingroot n used mtk droid tools for backup.after backup i tried to modify boot img and install cwm using mtk tools but now it wont boot up, nor it enters recovery mode, i tried to flash stock boot and recovery img through sp flashtool but its giving error (2004), plz help me plzzzz....
Hello, how to root Op3n Dott P4502 ?
I tested some programs on google play and on my pc, and it can't root my mobile
Can someone help me with root ?
Thanks.
@refresh
I too need this, pls answer.
1. Download and install apk from google play "MTK Engineering Mode"
2. In this apk "MTK Settings->Log and Debugging->User2Root" push "Root" button and exit apk.
3. Switch on "Debugging Mode" in phone:
-open up Settings, then scroll all the way down to About phone. Once there, tap Software information, then tap Build number seven times. You'll see a toast notification alerting you that you are now a developer.
- go back to the main Settings page and you'll see a new entry for Developer options. In this menu check USB debugging
4. Download and install this program iRoot, (download with IE beacuse firefox see dangerous file)
5. Run iRoot and connect phone to PC
6. Choose "Connect" and then "Root"
7. Unistall 2 chineese aplication, and install "Supersu" from google play (after restart update "supersu")
8. You have root.
I use chineese supersu beacuse this from google play have problem with permission to sdcard.
-----
Recovery Instalation:
1. Download recovery and copy it to /data/local/temp (change filename to recovery.img)
2. Installanr run Terminal emulator.
3. type:
su
dd if=/data/local/tmp/recovery.img of=/dev/recovery
4. Now reboot to recovery and make backup.
-----
Link to hungary forum Link
Thank you very much!
Rom for Medion p4502
I do the same but the phone is block in a boot loop.
When i start with the button "on" and "volume Up", i have a special screen with "No command" writed.
Then using the buttons under the screen i have a menu seems to a cm recovery.
Is there a rom for this phone ? the Medion p4502 ?
What you do , Root or CWM? I have Op3n Dott but this the same phone like medion p4502.
Dromadore said:
I do the same but the phone is block in a boot loop.
When i start with the button "on" and "volume Up", i have a special screen with "No command" writed.
Then using the buttons under the screen i have a menu seems to a cm recovery.
Is there a rom for this phone ? the Medion p4502 ?
Click to expand...
Click to collapse
-- i finaly passed the capchat so i'll edit this post with the right username --
shanti77 said:
What you do , Root or CWM? I have Op3n Dott but this the same phone like medion p4502.
Click to expand...
Click to collapse
Good morning,
I think i just need a ROM or a Backup.
I installed the systel recivert TWRP with flash tool, it works but missing the OS.
With flash tool:
I used those files: logo.bin, lk.bin, MBR, preloader.bin, secro.img, MT6582_Android_scatter.txt, boot.img, recovery.img, system.img
But i didn't have any files for: ebr1, ebr2, cache, usrdata
A the TWRP seems to work, i think i can simply flash a zip file on the SD-card.
Thank you four your interest !
ps: I was invited to type the captcha and it was very very very very difficult to read (i tried more than 20x).
Firmware ver213 link
shanti77 said:
1. Download and install apk from google play "MTK Engineering Mode"
2. In this apk "MTK Settings->Log and Debugging->User2Root" push "Root" button and exit apk.
3. Switch on "Debugging Mode" in phone:
-open up Settings, then scroll all the way down to About phone. Once there, tap Software information, then tap Build number seven times. You'll see a toast notification alerting you that you are now a developer.
- go back to the main Settings page and you'll see a new entry for Developer options. In this menu check USB debugging
4. Download and install this program iRoot, (download with IE beacuse firefox see dangerous file)
5. Run iRoot and connect phone to PC
6. Choose "Connect" and then "Root"
7. Unistall 2 chineese aplication, and install "Supersu" from google play (after restart update "supersu")
8. You have root.
I use chineese supersu beacuse this from google play have problem with permission to sdcard.
Click to expand...
Click to collapse
Thank you for excellent post! I managed to root my Medion P4502 using your instructions but substituted iRoot with Kingo Root. Here is the link with necessary steps.
shanti77 said:
Firmware ver213
Click to expand...
Click to collapse
*removed link because not passed limit yet*
Hey shanti, I too have been stupid and managed to remove my system. I was trying to navigate TWRP (so much more used to CWM with previous devices) and accidentally erased the system instead of backing it up. Is it possible to flash this with fastboot? I did managed to back up the boot files, just not the system, and I don't have a external SD card (I might be able to swap the one off my mums phone though at some point).
Thanks
Will
PS. If it helps, I use Arch Linux (32 bit) because my laptop chargers broken I'm using my spare PC, and also the phone is the Medion variant (LIFE P4502 from Aldi)
EDIT: Buying SD Card today
Can somebody help me to make cm11 port? Thanks
Were can i find chinese supersu? I instaled from google but really have problemy with SD, lost settings after reboot, and other problems
shanti77 said:
Firmware ver213 link
Click to expand...
Click to collapse
Hello,
Is this Original firmware, and how to do it?
Thanks for helping me.
Still need original ROM for Medion P4502
Can someone tell me where and how to recover my phone?
It doesn't connect to my network provider (I tested 3 differents Sim cards), and he also change his MAC address at WIFI connection.
I need original ROM and how to put it back (how to do).
Please help me as I don't want to send it back to Medion service (3th time), as they didn't do anything.
A friend has the same phone.
Is it possible to make a copy of his ROM (and how) to put it back on mine?
Thanks for helping me.
No answer, so phone send back to Medion repair service.
Hope this time it will return in good conditions ...
Please help!
Dromadore said:
I do the same but the phone is block in a boot loop.
When i start with the button "on" and "volume Up", i have a special screen with "No command" writed.
Then using the buttons under the screen i have a menu seems to a cm recovery.
Is there a rom for this phone ? the Medion p4502 ?
Click to expand...
Click to collapse
Hi Dromadore,
Did you end up to fix you bootloop issue? Can you please share your findings with me as I am desperately looking for a solution?
Cheers,
Hello there,my Wave 8 HD+ stuck in android boot logo. I downloaded the wave8hd_20151105_v1.8 update thru wireless update and install, it says error in installing:
E:error in /mnt/internal_sd/adupsfota/update.zip
(Status 7)
Installation aborted.
My tablet is now in recovery mode and cant move highlight due to no volume buttons available,i can only select the "reboot system now" option.
Any other alternative for volume button so that i could just do the factory reset??
I also followed the detailed instruction on bluewave website on how to update the said Tablet thru PC but to no avail.
i emailed both the Telecom Company from where i get my Bluewave Tablet and the Bluewave Customer support but until now they stiil haven't replied yet.
thank you very much for your immediate reply.
-Jovi
jovirex said:
Hello there,my Wave 8 HD+ stuck in android boot logo. I downloaded the wave8hd_20151105_v1.8 update thru wireless update and install, it says error in installing:
E:error in /mnt/internal_sd/adupsfota/update.zip
(Status 7)
Installation aborted.
My tablet is now in recovery mode and cant move highlight due to no volume buttons available,i can only select the "reboot system now" option.
Any other alternative for volume button so that i could just do the factory reset??
I also followed the detailed instruction on bluewave website on how to update the said Tablet thru PC but to no avail.
i emailed both the Telecom Company from where i get my Bluewave Tablet and the Bluewave Customer support but until now they stiil haven't replied yet.
thank you very much for your immediate reply.
-Jovi
Click to expand...
Click to collapse
maybe try to use adb and try to push the firmware manually.. if they have a firmware download available
toolhas4degrees said:
maybe try to use adb and try to push the firmware manually.. if they have a firmware download available
Click to expand...
Click to collapse
I did use the software Rockchip Batch Tool v1.7 provided by Bluewave in their website,install the 33GT driver for my tab(Tab can now be seen by my PC and download the correct firmware update(using my serial number at the back of said tablet) still provided by Bluewave,but still error in upgrade..
i just want to know how to change the highlighted option in recovery mode so i can wipe/factory reset my Tablet disregarding the said update..
there is an option in recovery mode "recover system from back up" but i could not choose to highlight and select the option..
any alternatives for the volume button??Btw,the firmware provided by Bluewave is in ".img" format,not "zip"..
thank you so much for your reply..
-Jovi
i have the same problem, got an error after wireless update.. please help!
to fix this... use your otg cable and connect a usb mouse then reboot it once its reboot use the mouse to move into the recovery mode... wipe data and cache then select update adb sideload once inside the sideload press the power button until it reboot.. once you see the bluewave and its start to have a loading in the lower right corner.. voila... your tablet is fix ... hope it help u
ohgnevets said:
i have the same problem, got an error after wireless update.. please help!
Click to expand...
Click to collapse
wave 8hd+
jho_zep said:
to fix this... use your otg cable and connect a usb mouse then reboot it once its reboot use the mouse to move into the recovery mode... wipe data and cache then select update adb sideload once inside the sideload press the power button until it reboot.. once you see the bluewave and its start to have a loading in the lower right corner.. voila... your tablet is fix ... hope it help u
Click to expand...
Click to collapse
hello, jho_zep, thank you so much for your reply, i am now able to move the highlight to select using my mouse, but still when i try to update from ADB, it tells me to send package to the device etc.. and i also tried to press the power button, it wont reboot the system, it would only shutdown the system.. another thing, i still cant get rid of the system update. " installing system update" then error comes in, my android is down.. i tried wipe date/ factory reset, still nothing.
Thanks in advance
Do you already solve your problem? because I have now the same problem as this.
I have pressed the wireless update then it restarted and it says an Error status 7.
I don't know what to do and how to deal with this problem.
can you help me?
My nextbook tablet rk3026 has a partition named metadata that holds the recovery boot commands. You could possibly try to wipe it and do a factory reset. I don't think it actually gets mounted so you would need to find a file the same size as the partition and dd to it. Or back up your system with rockchip flash tool then using a hex editor replace all data in metadata image with zeros. Obviously be careful. Here is a tool download with included guide credits to finless at freaktab(not sure if he is here at xda) for posting it.
http://freaktab.com/forum/developme...p-your-rk-device-rom-with-the-new-rk-2-1-tool
as always BACKUP and know if you don't do it correctly you may get a brick.
thank you for the response Destructos. but that solution won't help for my freakin weird tab 33gt HD+.
I get frustrated now
Problem solved
first thing to do is make sure that you have already installed the rkchip_usb driver in your computer.
What are the requirements?
1st of course your Tablet and Cable Connector
2nd Finless ROM Flash Tool v1.37
3rd Rokchip BatchTool v1.7
4th the update image/firmware for your Bluewave 8 HD+ that is downloadable from their official website
Steps:
1. off your tablet and connect it to the computer
2. open the Finless Rom Flash, uncheck all the boxes
3. turn ON your Tablet (be attentive) and while the blue screen is starting you may NOTICE that the ROM FLASH TOOL detected your device, it says "RKAndroid Mass Storage USB". when you have read that, press immediately the "Reboot Flash mode" and your device will in black screen. but ROM Flash tool still detected your device as "RKAndroid Mass Storage USB "
4. Open the Batch Tool, (you must know how to use it) find your image, then you will notice that the CONNECTED DEVICES below have color green, in that case you may now Click UPGRADE. wait for a minute and booooom, you device is functionable again.
have a feedback if it is helpful.
P.S.
before I go to that steps, when I am stuck in RECOVERY MODE of my device, I Click the Recover from BACKUP then my tablet restarts and it turns to BOOTLOOP and repeatedly saying NO COMMAND.
PLDC said:
first thing to do is make sure that you have already installed the rkchip_usb driver in your computer.
What are the requirements?
1st of course your Tablet and Cable Connector
2nd Finless ROM Flash Tool v1.37
3rd Rokchip BatchTool v1.7
4th the update image/firmware for your Bluewave 8 HD+ that is downloadable from their official website
Steps:
1. off your tablet and connect it to the computer
2. open the Finless Rom Flash, uncheck all the boxes
3. turn ON your Tablet (be attentive) and while the blue screen is starting you may NOTICE that the ROM FLASH TOOL detected your device, it says "RKAndroid Mass Storage USB". when you have read that, press immediately the "Reboot Flash mode" and your device will in black screen. but ROM Flash tool still detected your device as "RKAndroid Mass Storage USB "
4. Open the Batch Tool, (you must know how to use it) find your image, then you will notice that the CONNECTED DEVICES below have color green, in that case you may now Click UPGRADE. wait for a minute and booooom, you device is functionable again.
have a feedback if it is helpful.
P.S.
before I go to that steps, when I am stuck in RECOVERY MODE of my device, I Click the Recover from BACKUP then my tablet restarts and it turns to BOOTLOOP and repeatedly saying NO COMMAND.
Click to expand...
Click to collapse
Why is it, when I do this, my tablet can't be detected by the software? I'm stuck on recovery mode. When it's on the blue logo, still does nothing.
I can only see my device when I look for it on Device Manager under Android Phone. Why is that? It doesn't show the "Other Devices". I've installed the driver but to no avail, still fails me. Please help. Thanks!
I have been looking through the posts here and on other sites, and I cannot seem to find anyone with experience of rooting the Blackview A8
I have tried using the Kingo Root phone app and their PC software application, which did not work and left a number of other applications installed.
I want to root the A8 in order to be able to use ES File Explorer and StickMount to download photos direct to USB sticks.
If anyone has any suggestions to help with this they will be very gratefully received.
Bump ...
The processor is a Mediatek 6580A, in case anyone has rooted another device with this processor...
Full specs for the Blackview A8 on devicespecifications.com - I cannot post the Url at present
The device has the possibility of USB OTG, but does not connect to any device I have tried, and the USB OTG Checker App tells me that the API is installed, but no USB OTG in the Kernel.
Dropbox works fine as a backup/ transfer method, but I want to be able to use USB Sticks for when I am not on WiFi/ Network...
bump... need root for blackview a8 too
Rooting Blackview A8
segaodma said:
bump... need root for blackview a8 too
Click to expand...
Click to collapse
I have successfully rooted my Blackview Y806 A8 phone. I flashed a TWRP recovery first and then manually flashed the supersu zip. I will try to find time to write more detailed instructions asap.
mrgadgetuk said:
I have successfully rooted my Blackview Y806 A8 phone. I flashed a TWRP recovery first and then manually flashed the supersu zip. I will try to find time to write more detailed instructions asap.
Click to expand...
Click to collapse
Will also wait for files and procedure. Thanks.
---------- Post added at 08:38 PM ---------- Previous post was at 08:30 PM ----------
If it can help...
https://www.dealabs.com/bons-plans/...m-2050mah-double-sim--/256438?comment=4381794
Rooting A8
solid.snake said:
Will also wait for files and procedure. Thanks.
---------- Post added at 08:38 PM ---------- Previous post was at 08:30 PM ----------
If it can help...
https://www.dealabs.com/bons-plans/...m-2050mah-double-sim--/256438?comment=4381794
Click to expand...
Click to collapse
I have the TWRP recovery img and the supersu zip file. Does anybody know whether I'm allowed to upload these files directly to this website? And or put links to other websites relating to rooting the A8? One more thing. I believe there are two types of A8s. The Y806 and the Y813. I have the Y806 but my son has the Y813. There is a way of telling them apart. I will make a start on the instructions once someone confirms whether I can proceed.
mrgadgetuk said:
I have the TWRP recovery img and the supersu zip file. Does anybody know whether I'm allowed to upload these files directly to this website? And or put links to other websites relating to rooting the A8? One more thing. I believe there are two types of A8s. The Y806 and the Y813. I have the Y806 but my son has the Y813. There is a way of telling them apart. I will make a start on the instructions once someone confirms whether I can proceed.
Click to expand...
Click to collapse
Never mind, upload it.
How to make the difference between both A8?
Rooting A8 Instructions
First you need to download the correct Stock ROM for your device:
THIS IS FOR THE Y806 VERSION:
http://bbs.blackview.hk/viewtopic.php?f=136&t=57766
THIS IS FOR THE Y813 VERSION:
http://bbs.blackview.hk/viewtopic.php?f=136&t=32613 (THIS ALSO SHOWS YOU HOW TO IDENTIFY YOUR DEVICE.)
1. Download and extract (to a place where you can easily find it again) one of these ZIPs.
2. Rename the ‘recovery.img’ file inside, ‘recovery2’. Download the ‘A8 recovery.img’ from here https://mega.nz/#!PoJ3gJLA!-xm4X6AzmzsWl5LgQm2gFKaxr-yIC2B492LW4ucVWGY and copy it into the above extracted folder and rename it ‘recovery’ (without the inverted commas).
3. Here http://www.needrom.com/download/blackview-a8/ you will see ‘Flashtools’ about a quarter of the way down the page. Click on it and download will begin of Pack-Flashtool-v5.1604.00.000.
4. Unpack FlashTools. (There is a folder inside named ‘Driver’ if it’s required) and click on Flash_tool.exe inside the folder called SP_Flash_Tool_exe_Windows_v5.1604.00.000.
5. Select "scatter-Loading" and search for MT6580_Android_scatter.txt in the extracted ROM above and wait for the files to be added into Flash Tool.
6. Un-tick/unselect all, EXCEPT ‘recovery’.
7. Select "Download only".
8. Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).
9. Press the “Download” button to start and then connect your phone into the computer via USB data cable.
10. The process will start (If it doesn’t start after 5 seconds or so, unplug the cable and plug it back in).
11. A green circle with a tick will be displayed signifying it’s finished!
12. You can now safely disconnect your phone and turn it on.
FLASHING SuperSu.zip
1. Copy the SuperSu.zip file to your SD Card.
2. Reboot your phone into the new TWRP Recovery
3. Select ‘Install’ and locate the SuperSu.zip file and select ‘Install Image’.
4. After flashing has completed, reboot your phone and you will finally have root.
I BELIEVE I HAVE INCLUDED ALL THE INSTRUCTIONS. IF I’VE MISSED ANYTHING, LET ME KNOW AND I WILL TRY TO REPLY ASAP.
I’VE ALSO ATTACHED SOME IMAGES PROVING THAT MY A8 HAS BEEN ROOTED.
P.S. I’M NOT RESPONSIBLE IF YOU BRICK YOUR PHONE ACCIDENTALLY. SO READ INSTRUCTIONS CAREFULLY.
My phone has no white sticker, but a black sticker the size of the small white one. Would that be the y814?
Then it's a Y813
Here :
Y813 :
Y806 :
mrgadgetuk said:
First you need to download the correct Stock ROM for your device:
THIS IS FOR THE Y806 VERSION:
http://bbs.blackview.hk/viewtopic.php?f=136&t=57766
THIS IS FOR THE Y813 VERSION:
http://bbs.blackview.hk/viewtopic.php?f=136&t=32613 (THIS ALSO SHOWS YOU HOW TO IDENTIFY YOUR DEVICE.)
1. Download and extract (to a place where you can easily find it again) one of these ZIPs.
2. Rename the ‘recovery.img’ file inside, ‘recovery2’. Download the ‘A8 recovery.img’ from here https://mega.nz/#!PoJ3gJLA!-xm4X6AzmzsWl5LgQm2gFKaxr-yIC2B492LW4ucVWGY and copy it into the above extracted folder and rename it ‘recovery’ (without the inverted commas).
3. Here http://www.needrom.com/download/blackview-a8/ you will see ‘Flashtools’ about a quarter of the way down the page. Click on it and download will begin of Pack-Flashtool-v5.1604.00.000.
4. Unpack FlashTools. (There is a folder inside named ‘Driver’ if it’s required) and click on Flash_tool.exe inside the folder called SP_Flash_Tool_exe_Windows_v5.1604.00.000.
5. Select "scatter-Loading" and search for MT6580_Android_scatter.txt in the extracted ROM above and wait for the files to be added into Flash Tool.
6. Un-tick/unselect all, EXCEPT ‘recovery’.
7. Select "Download only".
8. Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).
9. Press the “Download” button to start and then connect your phone into the computer via USB data cable.
10. The process will start (If it doesn’t start after 5 seconds or so, unplug the cable and plug it back in).
11. A green circle with a tick will be displayed signifying it’s finished!
12. You can now safely disconnect your phone and turn it on.
FLASHING SuperSu.zip
1. Copy the SuperSu.zip file to your SD Card.
2. Reboot your phone into the new TWRP Recovery
3. Select ‘Install’ and locate the SuperSu.zip file and select ‘Install Image’.
4. After flashing has completed, reboot your phone and you will finally have root.
I BELIEVE I HAVE INCLUDED ALL THE INSTRUCTIONS. IF I’VE MISSED ANYTHING, LET ME KNOW AND I WILL TRY TO REPLY ASAP.
I’VE ALSO ATTACHED SOME IMAGES PROVING THAT MY A8 HAS BEEN ROOTED.
P.S. I’M NOT RESPONSIBLE IF YOU BRICK YOUR PHONE ACCIDENTALLY. SO READ INSTRUCTIONS CAREFULLY.
Click to expand...
Click to collapse
The MEGA link always give me download failed even I have a stable wifi connection. Any other miror on y813 stock rom link?
The Mega account for the ROMs isn't mine. It belongs to Blackview.hk
Edit:
Silly me... I was holding wrong keys for the start menu... thank you, it works!
Whoever you are... I owe you a beer!
Old message:
I did all from the tutorial (I have a black Y813). It finds the phone when I connect it to the USB, says all OK. But when I try to boot into TWRP (holding Volume- and Reset button) it still boots in the original factory Chinese boot mode. No TWRP mode.
Works! Works! Works!
Okay, now I have root. So far understood.
What have I to do if I would like to renew the total system. In may case the Android system has several adware included. I wish to change the rom against a "clean" system.
wollilolli said:
Okay, now I have root. So far understood.
What have I to do if I would like to renew the total system. In may case the Android system has several adware included. I wish to change the rom against a "clean" system.
Click to expand...
Click to collapse
I solved it myself. I have flashed the whole downloaded y806 file and checked all items in flashtool to be flashed. After a longer boot duration the system works great and ....without adware. Great!!
---------- Post added at 10:52 AM ---------- Previous post was at 10:46 AM ----------
segaodma said:
Edit:
Silly me... I was holding wrong keys for the start menu... thank you, it works!
Whoever you are... I owe you a beer!
Old message:
I did all from the tutorial (I have a black Y813). It finds the phone when I connect it to the USB, says all OK. But when I try to boot into TWRP (holding Volume- and Reset button) it still boots in the original factory Chinese boot mode. No TWRP mode.
Works! Works! Works!
Click to expand...
Click to collapse
Hi, but which keys are the valid ones?
Guys, do you got problems with A8's battery?
Is there a connection between rooting of A8 and decreasing A8's high phone idle?
Hey guys! I'm about to root my Blackview A8 using the method mentioned in this thread. How is everyone's experience with this? Is rooting my phone using the above-posted method completely safe?
I'll recommend this
mrgadgetuk said:
First you need to download the correct Stock ROM for your device:
THIS IS FOR THE Y806 VERSION:
THIS IS FOR THE Y813 VERSION:
] (THIS ALSO SHOWS YOU HOW TO IDENTIFY YOUR DEVICE.)
1. Download and extract (to a place where you can easily find it again) one of these ZIPs.
2. Rename the ‘recovery.img’ file inside, ‘recovery2’. Download the ‘A8 recovery.img’ from here and copy it into the above extracted folder and rename it ‘recovery’ (without the inverted commas).
3. Here you will see ‘Flashtools’ about a quarter of the way down the page. Click on it and download will begin of Pack-Flashtool-v5.1604.00.000.
4. Unpack FlashTools. (There is a folder inside named ‘Driver’ if it’s required) and click on Flash_tool.exe inside the folder called SP_Flash_Tool_exe_Windows_v5.1604.00.000.
5. Select "scatter-Loading" and search for MT6580_Android_scatter.txt in the extracted ROM above and wait for the files to be added into Flash Tool.
6. Un-tick/unselect all, EXCEPT ‘recovery’.
7. Select "Download only".
8. Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).
9. Press the “Download” button to start and then connect your phone into the computer via USB data cable.
10. The process will start (If it doesn’t start after 5 seconds or so, unplug the cable and plug it back in).
11. A green circle with a tick will be displayed signifying it’s finished!
12. You can now safely disconnect your phone and turn it on.
FLASHING SuperSu.zip
1. Copy the SuperSu.zip file to your SD Card.
2. Reboot your phone into the new TWRP Recovery
3. Select ‘Install’ and locate the SuperSu.zip file and select ‘Install Image’.
4. After flashing has completed, reboot your phone and you will finally have root.
I BELIEVE I HAVE INCLUDED ALL THE INSTRUCTIONS. IF I’VE MISSED ANYTHING, LET ME KNOW AND I WILL TRY TO REPLY ASAP.
I’VE ALSO ATTACHED SOME IMAGES PROVING THAT MY A8 HAS BEEN ROOTED.
P.S. I’M NOT RESPONSIBLE IF YOU BRICK YOUR PHONE ACCIDENTALLY. SO READ INSTRUCTIONS CAREFULLY.
Click to expand...
Click to collapse
I'm really thanks with you, this really worked and I recommend this process (I've a Y806) But you missed something. To install the drivers of the FlashTools you have to disable the obligatory use of signed drivers before to install it (If you don't have disable, The installation won't finish) Thanks
Hi. I've managed the first part of the process, up until receiving the green tick and copying the SuperSU.zip to the memory card on my A8. The problem comes when I want to go into TWRP: I manually enter recovery mode and I get a dead android icon with the line "no command".
Any ideas would be greatly appreciated.
John